diff options
| author | Jakub Kicinski | 2022-03-10 17:16:56 -0800 |
|---|---|---|
| committer | Jakub Kicinski | 2022-03-10 17:16:56 -0800 |
| commit | 1e8a3f0d2a1ef544611a7ea4a7c1512c732e0e43 (patch) | |
| tree | 89b9a31da1a19af868424f4dac2178536cf30781 /drivers/net/phy | |
| parent | 3e18bcb778e636045e091ddc09c2b69594bc844c (diff) | |
| parent | 186d32bbf034417b40e2b4e773eeb8ef106c16c1 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/dsa/dsa2.c
commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/
drivers/net/ethernet/intel/ice/ice.h
commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU")
commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/
drivers/staging/gdm724x/gdm_lte.c
commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
commit 4bcc4249b4cf ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/dp83822.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/meson-gxl.c | 31 |
2 files changed, 21 insertions, 12 deletions
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 211b5476a6f5..ce17b2af3218 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -274,7 +274,7 @@ static int dp83822_config_intr(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_DP83822_MISR1, 0); + err = phy_write(phydev, MII_DP83822_MISR2, 0); if (err < 0) return err; diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index 7e7904fee1d9..73f7962a37d3 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -30,8 +30,12 @@ #define INTSRC_LINK_DOWN BIT(4) #define INTSRC_REMOTE_FAULT BIT(5) #define INTSRC_ANEG_COMPLETE BIT(6) +#define INTSRC_ENERGY_DETECT BIT(7) #define INTSRC_MASK 30 +#define INT_SOURCES (INTSRC_LINK_DOWN | INTSRC_ANEG_COMPLETE | \ + INTSRC_ENERGY_DETECT) + #define BANK_ANALOG_DSP 0 #define BANK_WOL 1 #define BANK_BIST 3 @@ -200,7 +204,6 @@ static int meson_gxl_ack_interrupt(struct phy_device *phydev) static int meson_gxl_config_intr(struct phy_device *phydev) { - u16 val; int ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { @@ -209,16 +212,9 @@ static int meson_gxl_config_intr(struct phy_device *phydev) if (ret) return ret; - val = INTSRC_ANEG_PR - | INTSRC_PARALLEL_FAULT - | INTSRC_ANEG_LP_ACK - | INTSRC_LINK_DOWN - | INTSRC_REMOTE_FAULT - | INTSRC_ANEG_COMPLETE; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, INT_SOURCES); } else { - val = 0; - ret = phy_write(phydev, INTSRC_MASK, val); + ret = phy_write(phydev, INTSRC_MASK, 0); /* Ack any pending IRQ */ ret = meson_gxl_ack_interrupt(phydev); @@ -237,10 +233,23 @@ static irqreturn_t meson_gxl_handle_interrupt(struct phy_device *phydev) return IRQ_NONE; } + irq_status &= INT_SOURCES; + if (irq_status == 0) return IRQ_NONE; - phy_trigger_machine(phydev); + /* Aneg-complete interrupt is used for link-up detection */ + if (phydev->autoneg == AUTONEG_ENABLE && + irq_status == INTSRC_ENERGY_DETECT) + return IRQ_HANDLED; + + /* Give PHY some time before MAC starts sending data. This works + * around an issue where network doesn't come up properly. + */ + if (!(irq_status & INTSRC_LINK_DOWN)) + phy_queue_state_machine(phydev, msecs_to_jiffies(100)); + else + phy_trigger_machine(phydev); return IRQ_HANDLED; } |