Merge tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from WiFi (mac80211), and BPF.

  Current release - regressions:

   - skb_expand_head: adjust skb->truesize to fix socket memory
     accounting

   - mptcp: fix corrupt receiver key in MPC + data + checksum

  Previous releases - regressions:

   - multicast: calculate csum of looped-back and forwarded packets

   - cgroup: fix memory leak caused by missing cgroup_bpf_offline

   - cfg80211: fix management registrations locking, prevent list
     corruption

   - cfg80211: correct false positive in bridge/4addr mode check

   - tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing
     previous verdict

  Previous releases - always broken:

   - sctp: enhancements for the verification tag, prevent attackers from
     killing SCTP sessions

   - tipc: fix size validations for the MSG_CRYPTO type

   - mac80211: mesh: fix HE operation element length check, prevent out
     of bound access

   - tls: fix sign of socket errors, prevent positive error codes being
     reported from read()/write()

   - cfg80211: scan: extend RCU protection in
     cfg80211_add_nontrans_list()

   - implement ->sock_is_readable() for UDP and AF_UNIX, fix poll() for
     sockets in a BPF sockmap

   - bpf: fix potential race in tail call compatibility check resulting
     in two operations which would make the map incompatible succeeding

   - bpf: prevent increasing bpf_jit_limit above max

   - bpf: fix error usage of map_fd and fdget() in generic batch update

   - phy: ethtool: lock the phy for consistency of results

   - prevent infinite while loop in skb_tx_hash() when Tx races with
     driver reconfiguring the queue <> traffic class mapping

   - usbnet: fixes for bad HW conjured by syzbot

   - xen: stop tx queues during live migration, prevent UAF

   - net-sysfs: initialize uid and gid before calling
     net_ns_get_ownership

   - mlxsw: prevent Rx stalls under memory pressure"

* tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
  Revert "net: hns3: fix pause config problem after autoneg disabled"
  mptcp: fix corrupt receiver key in MPC + data + checksum
  riscv, bpf: Fix potential NULL dereference
  octeontx2-af: Fix possible null pointer dereference.
  octeontx2-af: Display all enabled PF VF rsrc_alloc entries.
  octeontx2-af: Check whether ipolicers exists
  net: ethernet: microchip: lan743x: Fix skb allocation failure
  net/tls: Fix flipped sign in async_wait.err assignment
  net/tls: Fix flipped sign in tls_err_abort() calls
  net/smc: Correct spelling mistake to TCPF_SYN_RECV
  net/smc: Fix smc_link->llc_testlink_time overflow
  nfp: bpf: relax prog rejection for mtu check through max_pkt_offset
  vmxnet3: do not stop tx queues after netif_device_detach()
  r8169: Add device 10ec:8162 to driver r8169
  ptp: Document the PTP_CLK_MAGIC ioctl number
  usbnet: fix error return code in usbnet_probe()
  net: hns3: adjust string spaces of some parameters of tx bd info in debugfs
  net: hns3: expand buffer len for some debugfs command
  net: hns3: add more string spaces for dumping packets number of queue info in debugfs
  net: hns3: fix data endian problem of some functions of debugfs
  ...

1 files changed, 81 insertions, 59 deletions

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f124a8a58bd4..a3bfb156c83d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -243,62 +243,10 @@ static void phy_sanitize_settings(struct phy_device *phydev)
 	}
 }
 
-int phy_ethtool_ksettings_set(struct phy_device *phydev,
-			      const struct ethtool_link_ksettings *cmd)
-{
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
-	u8 autoneg = cmd->base.autoneg;
-	u8 duplex = cmd->base.duplex;
-	u32 speed = cmd->base.speed;
-
-	if (cmd->base.phy_address != phydev->mdio.addr)
-		return -EINVAL;
-
-	linkmode_copy(advertising, cmd->link_modes.advertising);
-
-	/* We make sure that we don't pass unsupported values in to the PHY */
-	linkmode_and(advertising, advertising, phydev->supported);
-
-	/* Verify the settings we care about. */
-	if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
-		return -EINVAL;
-
-	if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
-		return -EINVAL;
-
-	if (autoneg == AUTONEG_DISABLE &&
-	    ((speed != SPEED_1000 &&
-	      speed != SPEED_100 &&
-	      speed != SPEED_10) ||
-	     (duplex != DUPLEX_HALF &&
-	      duplex != DUPLEX_FULL)))
-		return -EINVAL;
-
-	phydev->autoneg = autoneg;
-
-	if (autoneg == AUTONEG_DISABLE) {
-		phydev->speed = speed;
-		phydev->duplex = duplex;
-	}
-
-	linkmode_copy(phydev->advertising, advertising);
-
-	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-			 phydev->advertising, autoneg == AUTONEG_ENABLE);
-
-	phydev->master_slave_set = cmd->base.master_slave_cfg;
-	phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
-
-	/* Restart the PHY */
-	phy_start_aneg(phydev);
-
-	return 0;
-}
-EXPORT_SYMBOL(phy_ethtool_ksettings_set);
-
 void phy_ethtool_ksettings_get(struct phy_device *phydev,
 			       struct ethtool_link_ksettings *cmd)
 {
+	mutex_lock(&phydev->lock);
 	linkmode_copy(cmd->link_modes.supported, phydev->supported);
 	linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
 	linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
@@ -317,6 +265,7 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev,
 	cmd->base.autoneg = phydev->autoneg;
 	cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
 	cmd->base.eth_tp_mdix = phydev->mdix;
+	mutex_unlock(&phydev->lock);
 }
 EXPORT_SYMBOL(phy_ethtool_ksettings_get);
 
@@ -751,7 +700,7 @@ static int phy_check_link_status(struct phy_device *phydev)
 }
 
 /**
- * phy_start_aneg - start auto-negotiation for this PHY device
+ * _phy_start_aneg - start auto-negotiation for this PHY device
  * @phydev: the phy_device struct
  *
  * Description: Sanitizes the settings (if we're not autonegotiating
@@ -759,25 +708,43 @@ static int phy_check_link_status(struct phy_device *phydev)
  *   If the PHYCONTROL Layer is operating, we change the state to
  *   reflect the beginning of Auto-negotiation or forcing.
  */
-int phy_start_aneg(struct phy_device *phydev)
+static int _phy_start_aneg(struct phy_device *phydev)
 {
 	int err;
 
+	lockdep_assert_held(&phydev->lock);
+
 	if (!phydev->drv)
 		return -EIO;
 
-	mutex_lock(&phydev->lock);
-
 	if (AUTONEG_DISABLE == phydev->autoneg)
 		phy_sanitize_settings(phydev);
 
 	err = phy_config_aneg(phydev);
 	if (err < 0)
-		goto out_unlock;
+		return err;
 
 	if (phy_is_started(phydev))
 		err = phy_check_link_status(phydev);
-out_unlock:
+
+	return err;
+}
+
+/**
+ * phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
+ *
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ *   them), and then calls the driver's config_aneg function.
+ *   If the PHYCONTROL Layer is operating, we change the state to
+ *   reflect the beginning of Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	mutex_lock(&phydev->lock);
+	err = _phy_start_aneg(phydev);
 	mutex_unlock(&phydev->lock);
 
 	return err;
@@ -800,6 +767,61 @@ static int phy_poll_aneg_done(struct phy_device *phydev)
 	return ret < 0 ? ret : 0;
 }
 
+int phy_ethtool_ksettings_set(struct phy_device *phydev,
+			      const struct ethtool_link_ksettings *cmd)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+	u8 autoneg = cmd->base.autoneg;
+	u8 duplex = cmd->base.duplex;
+	u32 speed = cmd->base.speed;
+
+	if (cmd->base.phy_address != phydev->mdio.addr)
+		return -EINVAL;
+
+	linkmode_copy(advertising, cmd->link_modes.advertising);
+
+	/* We make sure that we don't pass unsupported values in to the PHY */
+	linkmode_and(advertising, advertising, phydev->supported);
+
+	/* Verify the settings we care about. */
+	if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
+		return -EINVAL;
+
+	if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
+		return -EINVAL;
+
+	if (autoneg == AUTONEG_DISABLE &&
+	    ((speed != SPEED_1000 &&
+	      speed != SPEED_100 &&
+	      speed != SPEED_10) ||
+	     (duplex != DUPLEX_HALF &&
+	      duplex != DUPLEX_FULL)))
+		return -EINVAL;
+
+	mutex_lock(&phydev->lock);
+	phydev->autoneg = autoneg;
+
+	if (autoneg == AUTONEG_DISABLE) {
+		phydev->speed = speed;
+		phydev->duplex = duplex;
+	}
+
+	linkmode_copy(phydev->advertising, advertising);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+			 phydev->advertising, autoneg == AUTONEG_ENABLE);
+
+	phydev->master_slave_set = cmd->base.master_slave_cfg;
+	phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
+
+	/* Restart the PHY */
+	_phy_start_aneg(phydev);
+
+	mutex_unlock(&phydev->lock);
+	return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_ksettings_set);
+
 /**
  * phy_speed_down - set speed to lowest speed supported by both link partners
  * @phydev: the phy_device struct