diff options
| author | Yoshihiro Shimoda | 2020-09-09 14:43:14 +0900 |
|---|---|---|
| committer | David S. Miller | 2020-09-10 12:57:08 -0700 |
| commit | 7d3ba9360c6dac7c077fbd6631e08f32ea2bcd53 (patch) | |
| tree | 661fe6efadd280cc8075852e1e02f74eb71cbd75 /drivers/net/phy | |
| parent | da26658c3d7005aa67a706dceff7b2807b59e123 (diff) | |
net: phy: call phy_disable_interrupts() in phy_attach_direct() instead
Since the micrel phy driver calls phy_init_hw() as a workaround,
the commit 9886a4dbd2aa ("net: phy: call phy_disable_interrupts()
in phy_init_hw()") disables the interrupt unexpectedly. So,
call phy_disable_interrupts() in phy_attach_direct() instead.
Otherwise, the phy cannot link up after the ethernet cable was
disconnected.
Note that other drivers (like at803x.c) also calls phy_init_hw().
So, perhaps, the driver caused a similar issue too.
Fixes: 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/phy_device.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 8adfbad0a1e8..b93b40cda54a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1143,10 +1143,6 @@ int phy_init_hw(struct phy_device *phydev) if (ret < 0) return ret; - ret = phy_disable_interrupts(phydev); - if (ret) - return ret; - if (phydev->drv->config_init) ret = phydev->drv->config_init(phydev); @@ -1423,6 +1419,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (err) goto error; + err = phy_disable_interrupts(phydev); + if (err) + return err; + phy_resume(phydev); phy_led_triggers_register(phydev); |