Merge USB 4.20-rc8 mergepoint into usb-next

We need the USB changes in here for additional patches to be able to
apply cleanly.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 44 insertions, 13 deletions

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 184c24baca15..d6916f787fce 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2807,6 +2807,12 @@ static int hso_get_config_data(struct usb_interface *interface)
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;
@@ -2877,10 +2883,18 @@ static int hso_probe(struct usb_interface *interface,
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index be1917be28f2..77d3c85febf1 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2320,6 +2320,10 @@ static int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
 	ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
 	ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 
+	/* Added to support MAC address changes */
+	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+
 	return 0;
 }
 
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 72a55b6b4211..c8872dd5ff5e 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1117,6 +1117,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1435, 0xd181, 4)},	/* Wistron NeWeb D18Q1 */
 	{QMI_FIXED_INTF(0x1435, 0xd181, 5)},	/* Wistron NeWeb D18Q1 */
 	{QMI_FIXED_INTF(0x1435, 0xd191, 4)},	/* Wistron NeWeb D19Q1 */
+	{QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)},	/* Fibocom NL668 series */
 	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
 	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
 	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */
@@ -1229,6 +1230,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)},	/* Telit LE920, LE920A4 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
 	{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f1b5201cc320..60dd1ec1665f 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -129,6 +129,7 @@
 #define USB_UPS_CTRL		0xd800
 #define USB_POWER_CUT		0xd80a
 #define USB_MISC_0		0xd81a
+#define USB_MISC_1		0xd81f
 #define USB_AFE_CTRL2		0xd824
 #define USB_UPS_CFG		0xd842
 #define USB_UPS_FLAGS		0xd848
@@ -555,6 +556,7 @@ enum spd_duplex {
 
 /* MAC PASSTHRU */
 #define AD_MASK			0xfee0
+#define BND_MASK		0x0004
 #define EFUSE			0xcfdb
 #define PASS_THRU_MASK		0x1
 
@@ -1150,7 +1152,7 @@ out1:
 	return ret;
 }
 
-/* Devices containing RTL8153-AD can support a persistent
+/* Devices containing proper chips can support a persistent
  * host system provided MAC address.
  * Examples of this are Dell TB15 and Dell WD15 docks
  */
@@ -1165,13 +1167,23 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
 
 	/* test for -AD variant of RTL8153 */
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-	if ((ocp_data & AD_MASK) != 0x1000)
-		return -ENODEV;
-
-	/* test for MAC address pass-through bit */
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
-	if ((ocp_data & PASS_THRU_MASK) != 1)
-		return -ENODEV;
+	if ((ocp_data & AD_MASK) == 0x1000) {
+		/* test for MAC address pass-through bit */
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+		if ((ocp_data & PASS_THRU_MASK) != 1) {
+			netif_dbg(tp, probe, tp->netdev,
+				  "No efuse for RTL8153-AD MAC pass through\n");
+			return -ENODEV;
+		}
+	} else {
+		/* test for RTL8153-BND */
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+		if ((ocp_data & BND_MASK) == 0) {
+			netif_dbg(tp, probe, tp->netdev,
+				  "Invalid variant for MAC pass through\n");
+			return -ENODEV;
+		}
+	}
 
 	/* returns _AUXMAC_#AABBCCDDEEFF# */
 	status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
@@ -1217,9 +1229,8 @@ static int set_ethernet_addr(struct r8152 *tp)
 	if (tp->version == RTL_VER_01) {
 		ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
 	} else {
-		/* if this is not an RTL8153-AD, no eFuse mac pass thru set,
-		 * or system doesn't provide valid _SB.AMAC this will be
-		 * be expected to non-zero
+		/* if device doesn't support MAC pass through this will
+		 * be expected to be non-zero
 		 */
 		ret = vendor_mac_passthru_addr_read(tp, &sa);
 		if (ret < 0)