ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices

Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices.
A major difference from ath9k is that there's now a firmware and
that's why we had to implement a new driver.

The wiki page for the driver is:

http://wireless.kernel.org/en/users/Drivers/ath10k

The driver has had many authors, they are listed here alphabetically:

Bartosz Markowski <bartosz.markowski@tieto.com>
Janusz Dziedzic <janusz.dziedzic@tieto.com>
Kalle Valo <kvalo@qca.qualcomm.com>
Marek Kwaczynski <marek.kwaczynski@tieto.com>
Marek Puzyniak <marek.puzyniak@tieto.com>
Michal Kazior <michal.kazior@tieto.com>
Sujith Manoharan <c_manoha@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 3066 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
new file mode 100644
index 000000000000..1285554a1025
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -0,0 +1,3066 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mac.h"
+
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "core.h"
+#include "debug.h"
+#include "wmi.h"
+#include "htt.h"
+#include "txrx.h"
+
+/**********/
+/* Crypto */
+/**********/
+
+static int ath10k_send_key(struct ath10k_vif *arvif,
+			   struct ieee80211_key_conf *key,
+			   enum set_key_cmd cmd,
+			   const u8 *macaddr)
+{
+	struct wmi_vdev_install_key_arg arg = {
+		.vdev_id = arvif->vdev_id,
+		.key_idx = key->keyidx,
+		.key_len = key->keylen,
+		.key_data = key->key,
+		.macaddr = macaddr,
+	};
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		arg.key_flags = WMI_KEY_PAIRWISE;
+	else
+		arg.key_flags = WMI_KEY_GROUP;
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		arg.key_cipher = WMI_CIPHER_AES_CCM;
+		key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		arg.key_cipher = WMI_CIPHER_TKIP;
+		arg.key_txmic_len = 8;
+		arg.key_rxmic_len = 8;
+		break;
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		arg.key_cipher = WMI_CIPHER_WEP;
+		/* AP/IBSS mode requires self-key to be groupwise
+		 * Otherwise pairwise key must be set */
+		if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
+			arg.key_flags = WMI_KEY_PAIRWISE;
+		break;
+	default:
+		ath10k_warn("cipher %d is not supported\n", key->cipher);
+		return -EOPNOTSUPP;
+	}
+
+	if (cmd == DISABLE_KEY) {
+		arg.key_cipher = WMI_CIPHER_NONE;
+		arg.key_data = NULL;
+	}
+
+	return ath10k_wmi_vdev_install_key(arvif->ar, &arg);
+}
+
+static int ath10k_install_key(struct ath10k_vif *arvif,
+			      struct ieee80211_key_conf *key,
+			      enum set_key_cmd cmd,
+			      const u8 *macaddr)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	INIT_COMPLETION(ar->install_key_done);
+
+	ret = ath10k_send_key(arvif, key, cmd, macaddr);
+	if (ret)
+		return ret;
+
+	ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
+					const u8 *addr)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
+		if (arvif->wep_keys[i] == NULL)
+			continue;
+
+		ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY,
+					 addr);
+		if (ret)
+			return ret;
+
+		peer->keys[i] = arvif->wep_keys[i];
+	}
+
+	return 0;
+}
+
+static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
+				  const u8 *addr)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	int first_errno = 0;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+		if (peer->keys[i] == NULL)
+			continue;
+
+		ret = ath10k_install_key(arvif, peer->keys[i],
+					 DISABLE_KEY, addr);
+		if (ret && first_errno == 0)
+			first_errno = ret;
+
+		if (ret)
+			ath10k_warn("could not remove peer wep key %d (%d)\n",
+				    i, ret);
+
+		peer->keys[i] = NULL;
+	}
+
+	return first_errno;
+}
+
+static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
+				 struct ieee80211_key_conf *key)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ath10k_peer *peer;
+	u8 addr[ETH_ALEN];
+	int first_errno = 0;
+	int ret;
+	int i;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	for (;;) {
+		/* since ath10k_install_key we can't hold data_lock all the
+		 * time, so we try to remove the keys incrementally */
+		spin_lock_bh(&ar->data_lock);
+		i = 0;
+		list_for_each_entry(peer, &ar->peers, list) {
+			for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+				if (peer->keys[i] == key) {
+					memcpy(addr, peer->addr, ETH_ALEN);
+					peer->keys[i] = NULL;
+					break;
+				}
+			}
+
+			if (i < ARRAY_SIZE(peer->keys))
+				break;
+		}
+		spin_unlock_bh(&ar->data_lock);
+
+		if (i == ARRAY_SIZE(peer->keys))
+			break;
+
+		ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr);
+		if (ret && first_errno == 0)
+			first_errno = ret;
+
+		if (ret)
+			ath10k_warn("could not remove key for %pM\n", addr);
+	}
+
+	return first_errno;
+}
+
+
+/*********************/
+/* General utilities */
+/*********************/
+
+static inline enum wmi_phy_mode
+chan_to_phymode(const struct cfg80211_chan_def *chandef)
+{
+	enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+	switch (chandef->chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		switch (chandef->width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+			phymode = MODE_11G;
+			break;
+		case NL80211_CHAN_WIDTH_20:
+			phymode = MODE_11NG_HT20;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			phymode = MODE_11NG_HT40;
+			break;
+		case NL80211_CHAN_WIDTH_80:
+		case NL80211_CHAN_WIDTH_80P80:
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_UNKNOWN;
+			break;
+		}
+		break;
+	case IEEE80211_BAND_5GHZ:
+		switch (chandef->width) {
+		case NL80211_CHAN_WIDTH_20_NOHT:
+			phymode = MODE_11A;
+			break;
+		case NL80211_CHAN_WIDTH_20:
+			phymode = MODE_11NA_HT20;
+			break;
+		case NL80211_CHAN_WIDTH_40:
+			phymode = MODE_11NA_HT40;
+			break;
+		case NL80211_CHAN_WIDTH_80:
+			phymode = MODE_11AC_VHT80;
+			break;
+		case NL80211_CHAN_WIDTH_80P80:
+		case NL80211_CHAN_WIDTH_160:
+			phymode = MODE_UNKNOWN;
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	WARN_ON(phymode == MODE_UNKNOWN);
+	return phymode;
+}
+
+static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
+{
+/*
+ * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+ *   0 for no restriction
+ *   1 for 1/4 us
+ *   2 for 1/2 us
+ *   3 for 1 us
+ *   4 for 2 us
+ *   5 for 4 us
+ *   6 for 8 us
+ *   7 for 16 us
+ */
+	switch (mpdudensity) {
+	case 0:
+		return 0;
+	case 1:
+	case 2:
+	case 3:
+	/* Our lower layer calculations limit our precision to
+	   1 microsecond */
+		return 1;
+	case 4:
+		return 2;
+	case 5:
+		return 4;
+	case 6:
+		return 8;
+	case 7:
+		return 16;
+	default:
+		return 0;
+	}
+}
+
+static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_peer *peer, *tmp;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+		if (peer->vdev_id != vdev_id)
+			continue;
+
+		ath10k_warn("removing stale peer %pM from vdev_id %d\n",
+			    peer->addr, vdev_id);
+
+		list_del(&peer->list);
+		kfree(peer);
+	}
+	spin_unlock_bh(&ar->data_lock);
+}
+
+/************************/
+/* Interface management */
+/************************/
+
+static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
+{
+	int ret;
+
+	ret = wait_for_completion_timeout(&ar->vdev_setup_done,
+					  ATH10K_VDEV_SETUP_TIMEOUT_HZ);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ath10k_vdev_start(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_conf *conf = &ar->hw->conf;
+	struct ieee80211_channel *channel = conf->chandef.chan;
+	struct wmi_vdev_start_request_arg arg = {};
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	INIT_COMPLETION(ar->vdev_setup_done);
+
+	arg.vdev_id = arvif->vdev_id;
+	arg.dtim_period = arvif->dtim_period;
+	arg.bcn_intval = arvif->beacon_interval;
+
+	arg.channel.freq = channel->center_freq;
+
+	arg.channel.band_center_freq1 = conf->chandef.center_freq1;
+
+	arg.channel.mode = chan_to_phymode(&conf->chandef);
+
+	arg.channel.min_power = channel->max_power * 3;
+	arg.channel.max_power = channel->max_power * 4;
+	arg.channel.max_reg_power = channel->max_reg_power * 4;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		arg.ssid = arvif->u.ap.ssid;
+		arg.ssid_len = arvif->u.ap.ssid_len;
+		arg.hidden_ssid = arvif->u.ap.hidden_ssid;
+	} else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
+		arg.ssid = arvif->vif->bss_conf.ssid;
+		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
+	}
+
+	ret = ath10k_wmi_vdev_start(ar, &arg);
+	if (ret) {
+		ath10k_warn("WMI vdev start failed: ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn("vdev setup failed %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ath10k_vdev_stop(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	INIT_COMPLETION(ar->vdev_setup_done);
+
+	ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
+	if (ret) {
+		ath10k_warn("WMI vdev stop failed: ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn("vdev setup failed %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
+{
+	struct ieee80211_channel *channel = ar->hw->conf.chandef.chan;
+	struct wmi_vdev_start_request_arg arg = {};
+	enum nl80211_channel_type type;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	type = cfg80211_get_chandef_type(&ar->hw->conf.chandef);
+
+	arg.vdev_id = vdev_id;
+	arg.channel.freq = channel->center_freq;
+	arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1;
+
+	/* TODO setup this dynamically, what in case we
+	   don't have any vifs? */
+	arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef);
+
+	arg.channel.min_power = channel->max_power * 3;
+	arg.channel.max_power = channel->max_power * 4;
+	arg.channel.max_reg_power = channel->max_reg_power * 4;
+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
+
+	ret = ath10k_wmi_vdev_start(ar, &arg);
+	if (ret) {
+		ath10k_warn("Monitor vdev start failed: ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret) {
+		ath10k_warn("Monitor vdev setup failed %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
+	if (ret) {
+		ath10k_warn("Monitor vdev up failed: %d\n", ret);
+		goto vdev_stop;
+	}
+
+	ar->monitor_vdev_id = vdev_id;
+	ar->monitor_enabled = true;
+
+	return 0;
+
+vdev_stop:
+	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+
+	return ret;
+}
+
+static int ath10k_monitor_stop(struct ath10k *ar)
+{
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	/* For some reasons, ath10k_wmi_vdev_down() here couse
+	 * often ath10k_wmi_vdev_stop() to fail. Next we could
+	 * not run monitor vdev and driver reload
+	 * required. Don't see such problems we skip
+	 * ath10k_wmi_vdev_down() here.
+	 */
+
+	ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+	if (ret)
+		ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+
+	ret = ath10k_vdev_setup_sync(ar);
+	if (ret)
+		ath10k_warn("Monitor_down sync failed: %d\n", ret);
+
+	ar->monitor_enabled = false;
+	return ret;
+}
+
+static int ath10k_monitor_create(struct ath10k *ar)
+{
+	int bit, ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (ar->monitor_present) {
+		ath10k_warn("Monitor mode already enabled\n");
+		return 0;
+	}
+
+	bit = ffs(ar->free_vdev_map);
+	if (bit == 0) {
+		ath10k_warn("No free VDEV slots\n");
+		return -ENOMEM;
+	}
+
+	ar->monitor_vdev_id = bit - 1;
+	ar->free_vdev_map &= ~(1 << ar->monitor_vdev_id);
+
+	ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
+				     WMI_VDEV_TYPE_MONITOR,
+				     0, ar->mac_addr);
+	if (ret) {
+		ath10k_warn("WMI vdev monitor create failed: ret %d\n", ret);
+		goto vdev_fail;
+	}
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+		   ar->monitor_vdev_id);
+
+	ar->monitor_present = true;
+	return 0;
+
+vdev_fail:
+	/*
+	 * Restore the ID to the global map.
+	 */
+	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
+	return ret;
+}
+
+static int ath10k_monitor_destroy(struct ath10k *ar)
+{
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (!ar->monitor_present)
+		return 0;
+
+	ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
+	if (ret) {
+		ath10k_warn("WMI vdev monitor delete failed: %d\n", ret);
+		return ret;
+	}
+
+	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
+	ar->monitor_present = false;
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+		   ar->monitor_vdev_id);
+	return ret;
+}
+
+static void ath10k_control_beaconing(struct ath10k_vif *arvif,
+				struct ieee80211_bss_conf *info)
+{
+	int ret = 0;
+
+	if (!info->enable_beacon) {
+		ath10k_vdev_stop(arvif);
+		return;
+	}
+
+	arvif->tx_seq_no = 0x1000;
+
+	ret = ath10k_vdev_start(arvif);
+	if (ret)
+		return;
+
+	ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, 0, info->bssid);
+	if (ret) {
+		ath10k_warn("Failed to bring up VDEV: %d\n",
+			    arvif->vdev_id);
+		return;
+	}
+	ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+}
+
+static void ath10k_control_ibss(struct ath10k_vif *arvif,
+				struct ieee80211_bss_conf *info,
+				const u8 self_peer[ETH_ALEN])
+{
+	int ret = 0;
+
+	if (!info->ibss_joined) {
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer);
+		if (ret)
+			ath10k_warn("Failed to delete IBSS self peer:%pM for VDEV:%d ret:%d\n",
+				    self_peer, arvif->vdev_id, ret);
+
+		if (is_zero_ether_addr(arvif->u.ibss.bssid))
+			return;
+
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id,
+					 arvif->u.ibss.bssid);
+		if (ret) {
+			ath10k_warn("Failed to delete IBSS BSSID peer:%pM for VDEV:%d ret:%d\n",
+				    arvif->u.ibss.bssid, arvif->vdev_id, ret);
+			return;
+		}
+
+		memset(arvif->u.ibss.bssid, 0, ETH_ALEN);
+
+		return;
+	}
+
+	ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer);
+	if (ret) {
+		ath10k_warn("Failed to create IBSS self peer:%pM for VDEV:%d ret:%d\n",
+			    self_peer, arvif->vdev_id, ret);
+		return;
+	}
+
+	ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_ATIM_WINDOW,
+					ATH10K_DEFAULT_ATIM);
+	if (ret)
+		ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n",
+			    arvif->vdev_id, ret);
+}
+
+/*
+ * Review this when mac80211 gains per-interface powersave support.
+ */
+static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath10k_generic_iter *ar_iter = data;
+	struct ieee80211_conf *conf = &ar_iter->ar->hw->conf;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	enum wmi_sta_powersave_param param;
+	enum wmi_sta_ps_mode psmode;
+	int ret;
+
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return;
+
+	if (conf->flags & IEEE80211_CONF_PS) {
+		psmode = WMI_STA_PS_MODE_ENABLED;
+		param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+
+		ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar,
+						  arvif->vdev_id,
+						  param,
+						  conf->dynamic_ps_timeout);
+		if (ret) {
+			ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
+				    arvif->vdev_id);
+			return;
+		}
+
+		ar_iter->ret = ret;
+	} else {
+		psmode = WMI_STA_PS_MODE_DISABLED;
+	}
+
+	ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
+					     psmode);
+	if (ar_iter->ret)
+		ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
+			    psmode, arvif->vdev_id);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
+			   psmode, arvif->vdev_id);
+}
+
+/**********************/
+/* Station management */
+/**********************/
+
+static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
+				      struct ath10k_vif *arvif,
+				      struct ieee80211_sta *sta,
+				      struct ieee80211_bss_conf *bss_conf,
+				      struct wmi_peer_assoc_complete_arg *arg)
+{
+	memcpy(arg->addr, sta->addr, ETH_ALEN);
+	arg->vdev_id = arvif->vdev_id;
+	arg->peer_aid = sta->aid;
+	arg->peer_flags |= WMI_PEER_AUTH;
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+		/*
+		 * Seems FW have problems with Power Save in STA
+		 * mode when we setup this parameter to high (eg. 5).
+		 * Often we see that FW don't send NULL (with clean P flags)
+		 * frame even there is info about buffered frames in beacons.
+		 * Sometimes we have to wait more than 10 seconds before FW
+		 * will wakeup. Often sending one ping from AP to our device
+		 * just fail (more than 50%).
+		 *
+		 * Seems setting this FW parameter to 1 couse FW
+		 * will check every beacon and will wakup immediately
+		 * after detection buffered data.
+		 */
+		arg->peer_listen_intval = 1;
+	else
+		arg->peer_listen_intval = ar->hw->conf.listen_interval;
+
+	arg->peer_num_spatial_streams = 1;
+
+	/*
+	 * The assoc capabilities are available only in managed mode.
+	 */
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA && bss_conf)
+		arg->peer_caps = bss_conf->assoc_capability;
+}
+
+static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
+				       struct ath10k_vif *arvif,
+				       struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct ieee80211_vif *vif = arvif->vif;
+	struct ieee80211_bss_conf *info = &vif->bss_conf;
+	struct cfg80211_bss *bss;
+	const u8 *rsnie = NULL;
+	const u8 *wpaie = NULL;
+
+	bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+			       info->bssid, NULL, 0, 0, 0);
+	if (bss) {
+		const struct cfg80211_bss_ies *ies;
+
+		rcu_read_lock();
+		rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);
+
+		ies = rcu_dereference(bss->ies);
+
+		wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
+				WLAN_OUI_TYPE_MICROSOFT_WPA,
+				ies->data,
+				ies->len);
+		rcu_read_unlock();
+		cfg80211_put_bss(ar->hw->wiphy, bss);
+	}
+
+	/* FIXME: base on RSN IE/WPA IE is a correct idea? */
+	if (rsnie || wpaie) {
+		ath10k_dbg(ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
+		arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+	}
+
+	if (wpaie) {
+		ath10k_dbg(ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
+		arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+	}
+}
+
+static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+				      struct ieee80211_sta *sta,
+				      struct wmi_peer_assoc_complete_arg *arg)
+{
+	struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+	const struct ieee80211_supported_band *sband;
+	const struct ieee80211_rate *rates;
+	u32 ratemask;
+	int i;
+
+	sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
+	ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+	rates = sband->bitrates;
+
+	rateset->num_rates = 0;
+
+	for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
+		if (!(ratemask & 1))
+			continue;
+
+		rateset->rates[rateset->num_rates] = rates->hw_value;
+		rateset->num_rates++;
+	}
+}
+
+static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
+				   struct ieee80211_sta *sta,
+				   struct wmi_peer_assoc_complete_arg *arg)
+{
+	const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	int smps;
+	int i, n;
+
+	if (!ht_cap->ht_supported)
+		return;
+
+	arg->peer_flags |= WMI_PEER_HT;
+	arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+				    ht_cap->ampdu_factor)) - 1;
+
+	arg->peer_mpdu_density =
+		ath10k_parse_mpdudensity(ht_cap->ampdu_density);
+
+	arg->peer_ht_caps = ht_cap->cap;
+	arg->peer_rate_caps |= WMI_RC_HT_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
+		arg->peer_flags |= WMI_PEER_LDPC;
+
+	if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
+		arg->peer_flags |= WMI_PEER_40MHZ;
+		arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
+	}
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+		arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
+		arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
+		arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
+		arg->peer_flags |= WMI_PEER_STBC;
+	}
+
+	if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
+		u32 stbc;
+		stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
+		stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
+		stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
+		arg->peer_rate_caps |= stbc;
+		arg->peer_flags |= WMI_PEER_STBC;
+	}
+
+	smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+	smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (smps == WLAN_HT_CAP_SM_PS_STATIC) {
+		arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
+		arg->peer_flags |= WMI_PEER_STATIC_MIMOPS;
+	} else if (smps == WLAN_HT_CAP_SM_PS_DYNAMIC) {
+		arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
+		arg->peer_flags |= WMI_PEER_DYN_MIMOPS;
+	}
+
+	if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
+		arg->peer_rate_caps |= WMI_RC_TS_FLAG;
+	else if (ht_cap->mcs.rx_mask[1])
+		arg->peer_rate_caps |= WMI_RC_DS_FLAG;
+
+	for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++)
+		if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
+			arg->peer_ht_rates.rates[n++] = i;
+
+	arg->peer_ht_rates.num_rates = n;
+	arg->peer_num_spatial_streams = max((n+7) / 8, 1);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+		   arg->peer_ht_rates.num_rates,
+		   arg->peer_num_spatial_streams);
+}
+
+static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
+				       struct ath10k_vif *arvif,
+				       struct ieee80211_sta *sta,
+				       struct ieee80211_bss_conf *bss_conf,
+				       struct wmi_peer_assoc_complete_arg *arg)
+{
+	u32 uapsd = 0;
+	u32 max_sp = 0;
+
+	if (sta->wme)
+		arg->peer_flags |= WMI_PEER_QOS;
+
+	if (sta->wme && sta->uapsd_queues) {
+		ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+			   sta->uapsd_queues, sta->max_sp);
+
+		arg->peer_flags |= WMI_PEER_APSD;
+		arg->peer_flags |= WMI_RC_UAPSD_FLAG;
+
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+			uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+			uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+			uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
+		if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+			uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
+				 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;
+
+
+		if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
+			max_sp = sta->max_sp;
+
+		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+					   sta->addr,
+					   WMI_AP_PS_PEER_PARAM_UAPSD,
+					   uapsd);
+
+		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+					   sta->addr,
+					   WMI_AP_PS_PEER_PARAM_MAX_SP,
+					   max_sp);
+
+		/* TODO setup this based on STA listen interval and
+		   beacon interval. Currently we don't know
+		   sta->listen_interval - mac80211 patch required.
+		   Currently use 10 seconds */
+		ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+					   sta->addr,
+					   WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
+					   10);
+	}
+}
+
+static void ath10k_peer_assoc_h_qos_sta(struct ath10k *ar,
+					struct ath10k_vif *arvif,
+					struct ieee80211_sta *sta,
+					struct ieee80211_bss_conf *bss_conf,
+					struct wmi_peer_assoc_complete_arg *arg)
+{
+	if (bss_conf->qos)
+		arg->peer_flags |= WMI_PEER_QOS;
+}
+
+static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
+				    struct ieee80211_sta *sta,
+				    struct wmi_peer_assoc_complete_arg *arg)
+{
+	const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+
+	if (!vht_cap->vht_supported)
+		return;
+
+	arg->peer_flags |= WMI_PEER_VHT;
+
+	arg->peer_vht_caps = vht_cap->cap;
+
+	if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+		arg->peer_flags |= WMI_PEER_80MHZ;
+
+	arg->peer_vht_rates.rx_max_rate =
+		__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
+	arg->peer_vht_rates.rx_mcs_set =
+		__le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
+	arg->peer_vht_rates.tx_max_rate =
+		__le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+	arg->peer_vht_rates.tx_mcs_set =
+		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+}
+
+static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+				    struct ath10k_vif *arvif,
+				    struct ieee80211_sta *sta,
+				    struct ieee80211_bss_conf *bss_conf,
+				    struct wmi_peer_assoc_complete_arg *arg)
+{
+	switch (arvif->vdev_type) {
+	case WMI_VDEV_TYPE_AP:
+		ath10k_peer_assoc_h_qos_ap(ar, arvif, sta, bss_conf, arg);
+		break;
+	case WMI_VDEV_TYPE_STA:
+		ath10k_peer_assoc_h_qos_sta(ar, arvif, sta, bss_conf, arg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
+					struct ath10k_vif *arvif,
+					struct ieee80211_sta *sta,
+					struct wmi_peer_assoc_complete_arg *arg)
+{
+	enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+	/* FIXME: add VHT */
+
+	switch (ar->hw->conf.chandef.chan->band) {
+	case IEEE80211_BAND_2GHZ:
+		if (sta->ht_cap.ht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11NG_HT40;
+			else
+				phymode = MODE_11NG_HT20;
+		} else {
+			phymode = MODE_11G;
+		}
+
+		break;
+	case IEEE80211_BAND_5GHZ:
+		if (sta->ht_cap.ht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11NA_HT40;
+			else
+				phymode = MODE_11NA_HT20;
+		} else {
+			phymode = MODE_11A;
+		}
+
+		break;
+	default:
+		break;
+	}
+
+	arg->peer_phymode = phymode;
+	WARN_ON(phymode == MODE_UNKNOWN);
+}
+
+static int ath10k_peer_assoc(struct ath10k *ar,
+			     struct ath10k_vif *arvif,
+			     struct ieee80211_sta *sta,
+			     struct ieee80211_bss_conf *bss_conf)
+{
+	struct wmi_peer_assoc_complete_arg arg;
+
+	memset(&arg, 0, sizeof(struct wmi_peer_assoc_complete_arg));
+
+	ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, &arg);
+	ath10k_peer_assoc_h_crypto(ar, arvif, &arg);
+	ath10k_peer_assoc_h_rates(ar, sta, &arg);
+	ath10k_peer_assoc_h_ht(ar, sta, &arg);
+	ath10k_peer_assoc_h_vht(ar, sta, &arg);
+	ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, &arg);
+	ath10k_peer_assoc_h_phymode(ar, arvif, sta, &arg);
+
+	return ath10k_wmi_peer_assoc(ar, &arg);
+}
+
+/* can be called only in mac80211 callbacks due to `key_count` usage */
+static void ath10k_bss_assoc(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ieee80211_sta *ap_sta;
+	int ret;
+
+	rcu_read_lock();
+
+	ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
+	if (!ap_sta) {
+		ath10k_warn("Failed to find station entry for %pM\n",
+			    bss_conf->bssid);
+		rcu_read_unlock();
+		return;
+	}
+
+	ret = ath10k_peer_assoc(ar, arvif, ap_sta, bss_conf);
+	if (ret) {
+		ath10k_warn("Peer assoc failed for %pM\n", bss_conf->bssid);
+		rcu_read_unlock();
+		return;
+	}
+
+	rcu_read_unlock();
+
+	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
+				 bss_conf->bssid);
+	if (ret)
+		ath10k_warn("VDEV: %d up failed: ret %d\n",
+			    arvif->vdev_id, ret);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "VDEV: %d associated, BSSID: %pM, AID: %d\n",
+			   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+}
+
+/*
+ * FIXME: flush TIDs
+ */
+static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	/*
+	 * For some reason, calling VDEV-DOWN before VDEV-STOP
+	 * makes the FW to send frames via HTT after disassociation.
+	 * No idea why this happens, even though VDEV-DOWN is supposed
+	 * to be analogous to link down, so just stop the VDEV.
+	 */
+	ret = ath10k_vdev_stop(arvif);
+	if (!ret)
+		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
+			   arvif->vdev_id);
+
+	/*
+	 * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
+	 * report beacons from previously associated network through HTT.
+	 * This in turn would spam mac80211 WARN_ON if we bring down all
+	 * interfaces as it expects there is no rx when no interface is
+	 * running.
+	 */
+	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+	if (ret)
+		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
+			   arvif->vdev_id, ret);
+
+	ath10k_wmi_flush_tx(ar);
+
+	arvif->def_wep_key_index = 0;
+}
+
+static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
+				struct ieee80211_sta *sta)
+{
+	int ret = 0;
+
+	ret = ath10k_peer_assoc(ar, arvif, sta, NULL);
+	if (ret) {
+		ath10k_warn("WMI peer assoc failed for %pM\n", sta->addr);
+		return ret;
+	}
+
+	ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
+	if (ret) {
+		ath10k_warn("could not install peer wep keys (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ath10k_station_disassoc(struct ath10k *ar, struct ath10k_vif *arvif,
+				   struct ieee80211_sta *sta)
+{
+	int ret = 0;
+
+	ret = ath10k_clear_peer_keys(arvif, sta->addr);
+	if (ret) {
+		ath10k_warn("could not clear all peer wep keys (%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+/**************/
+/* Regulatory */
+/**************/
+
+static int ath10k_update_channel_list(struct ath10k *ar)
+{
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_supported_band **bands;
+	enum ieee80211_band band;
+	struct ieee80211_channel *channel;
+	struct wmi_scan_chan_list_arg arg = {0};
+	struct wmi_channel_arg *ch;
+	bool passive;
+	int len;
+	int ret;
+	int i;
+
+	bands = hw->wiphy->bands;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			if (bands[band]->channels[i].flags &
+			    IEEE80211_CHAN_DISABLED)
+				continue;
+
+			arg.n_channels++;
+		}
+	}
+
+	len = sizeof(struct wmi_channel_arg) * arg.n_channels;
+	arg.channels = kzalloc(len, GFP_KERNEL);
+	if (!arg.channels)
+		return -ENOMEM;
+
+	ch = arg.channels;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!bands[band])
+			continue;
+
+		for (i = 0; i < bands[band]->n_channels; i++) {
+			channel = &bands[band]->channels[i];
+
+			if (channel->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			ch->allow_ht   = true;
+
+			/* FIXME: when should we really allow VHT? */
+			ch->allow_vht = true;
+
+			ch->allow_ibss =
+				!(channel->flags & IEEE80211_CHAN_NO_IBSS);
+
+			ch->ht40plus =
+				!(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
+
+			passive = channel->flags & IEEE80211_CHAN_PASSIVE_SCAN;
+			ch->passive = passive;
+
+			ch->freq = channel->center_freq;
+			ch->min_power = channel->max_power * 3;
+			ch->max_power = channel->max_power * 4;
+			ch->max_reg_power = channel->max_reg_power * 4;
+			ch->max_antenna_gain = channel->max_antenna_gain;
+			ch->reg_class_id = 0; /* FIXME */
+
+			/* FIXME: why use only legacy modes, why not any
+			 * HT/VHT modes? Would that even make any
+			 * difference? */
+			if (channel->band == IEEE80211_BAND_2GHZ)
+				ch->mode = MODE_11G;
+			else
+				ch->mode = MODE_11A;
+
+			if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
+				continue;
+
+			ath10k_dbg(ATH10K_DBG_WMI,
+				   "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				   __func__, ch - arg.channels, arg.n_channels,
+				   ch->freq, ch->max_power, ch->max_reg_power,
+				   ch->max_antenna_gain, ch->mode);
+
+			ch++;
+		}
+	}
+
+	ret = ath10k_wmi_scan_chan_list(ar, &arg);
+	kfree(arg.channels);
+
+	return ret;
+}
+
+static void ath10k_reg_notifier(struct wiphy *wiphy,
+				struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct reg_dmn_pair_mapping *regpair;
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
+
+	ret = ath10k_update_channel_list(ar);
+	if (ret)
+		ath10k_warn("could not update channel list (%d)\n", ret);
+
+	regpair = ar->ath_common.regulatory.regpair;
+	/* Target allows setting up per-band regdomain but ath_common provides
+	 * a combined one only */
+	ret = ath10k_wmi_pdev_set_regdomain(ar,
+					    regpair->regDmnEnum,
+					    regpair->regDmnEnum, /* 2ghz */
+					    regpair->regDmnEnum, /* 5ghz */
+					    regpair->reg_2ghz_ctl,
+					    regpair->reg_5ghz_ctl);
+	if (ret)
+		ath10k_warn("could not set pdev regdomain (%d)\n", ret);
+}
+
+/***************/
+/* TX handlers */
+/***************/
+
+/*
+ * Frames sent to the FW have to be in "Native Wifi" format.
+ * Strip the QoS field from the 802.11 header.
+ */
+static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw,
+				       struct ieee80211_tx_control *control,
+				       struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (void *)skb->data;
+	u8 *qos_ctl;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	qos_ctl = ieee80211_get_qos_ctl(hdr);
+	memmove(qos_ctl, qos_ctl + IEEE80211_QOS_CTL_LEN,
+		skb->len - ieee80211_hdrlen(hdr->frame_control));
+	skb_trim(skb, skb->len - IEEE80211_QOS_CTL_LEN);
+}
+
+static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_key_conf *key = info->control.hw_key;
+	int ret;
+
+	/* TODO AP mode should be implemented */
+	if (vif->type != NL80211_IFTYPE_STATION)
+		return;
+
+	if (!ieee80211_has_protected(hdr->frame_control))
+		return;
+
+	if (!key)
+		return;
+
+	if (key->cipher != WLAN_CIPHER_SUITE_WEP40 &&
+	    key->cipher != WLAN_CIPHER_SUITE_WEP104)
+		return;
+
+	if (key->keyidx == arvif->def_wep_key_index)
+		return;
+
+	ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_DEF_KEYID,
+					key->keyidx);
+	if (ret) {
+		ath10k_warn("could not update wep keyidx (%d)\n", ret);
+		return;
+	}
+
+	arvif->def_wep_key_index = key->keyidx;
+}
+
+static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	/* This is case only for P2P_GO */
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
+	    arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+		return;
+
+	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
+		spin_lock_bh(&ar->data_lock);
+		if (arvif->u.ap.noa_data)
+			if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
+					      GFP_ATOMIC))
+				memcpy(skb_put(skb, arvif->u.ap.noa_len),
+				       arvif->u.ap.noa_data,
+				       arvif->u.ap.noa_len);
+		spin_unlock_bh(&ar->data_lock);
+	}
+}
+
+static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	int ret;
+
+	if (ieee80211_is_mgmt(hdr->frame_control))
+		ret = ath10k_htt_mgmt_tx(ar->htt, skb);
+	else if (ieee80211_is_nullfunc(hdr->frame_control))
+		/* FW does not report tx status properly for NullFunc frames
+		 * unless they are sent through mgmt tx path. mac80211 sends
+		 * those frames when it detects link/beacon loss and depends on
+		 * the tx status to be correct. */
+		ret = ath10k_htt_mgmt_tx(ar->htt, skb);
+	else
+		ret = ath10k_htt_tx(ar->htt, skb);
+
+	if (ret) {
+		ath10k_warn("tx failed (%d). dropping packet.\n", ret);
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_offchan_tx_purge(struct ath10k *ar)
+{
+	struct sk_buff *skb;
+
+	for (;;) {
+		skb = skb_dequeue(&ar->offchan_tx_queue);
+		if (!skb)
+			break;
+
+		ieee80211_free_txskb(ar->hw, skb);
+	}
+}
+
+void ath10k_offchan_tx_work(struct work_struct *work)
+{
+	struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
+	struct ath10k_peer *peer;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb;
+	const u8 *peer_addr;
+	int vdev_id;
+	int ret;
+
+	/* FW requirement: We must create a peer before FW will send out
+	 * an offchannel frame. Otherwise the frame will be stuck and
+	 * never transmitted. We delete the peer upon tx completion.
+	 * It is unlikely that a peer for offchannel tx will already be
+	 * present. However it may be in some rare cases so account for that.
+	 * Otherwise we might remove a legitimate peer and break stuff. */
+
+	for (;;) {
+		skb = skb_dequeue(&ar->offchan_tx_queue);
+		if (!skb)
+			break;
+
+		mutex_lock(&ar->conf_mutex);
+
+		ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+			   skb);
+
+		hdr = (struct ieee80211_hdr *)skb->data;
+		peer_addr = ieee80211_get_DA(hdr);
+		vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id;
+
+		spin_lock_bh(&ar->data_lock);
+		peer = ath10k_peer_find(ar, vdev_id, peer_addr);
+		spin_unlock_bh(&ar->data_lock);
+
+		if (peer)
+			ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
+				   peer_addr, vdev_id);
+
+		if (!peer) {
+			ret = ath10k_peer_create(ar, vdev_id, peer_addr);
+			if (ret)
+				ath10k_warn("peer %pM on vdev %d not created (%d)\n",
+					    peer_addr, vdev_id, ret);
+		}
+
+		spin_lock_bh(&ar->data_lock);
+		INIT_COMPLETION(ar->offchan_tx_completed);
+		ar->offchan_tx_skb = skb;
+		spin_unlock_bh(&ar->data_lock);
+
+		ath10k_tx_htt(ar, skb);
+
+		ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
+						  3 * HZ);
+		if (ret <= 0)
+			ath10k_warn("timed out waiting for offchannel skb %p\n",
+				    skb);
+
+		if (!peer) {
+			ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
+			if (ret)
+				ath10k_warn("peer %pM on vdev %d not deleted (%d)\n",
+					    peer_addr, vdev_id, ret);
+		}
+
+		mutex_unlock(&ar->conf_mutex);
+	}
+}
+
+/************/
+/* Scanning */
+/************/
+
+/*
+ * This gets called if we dont get a heart-beat during scan.
+ * This may indicate the FW has hung and we need to abort the
+ * scan manually to prevent cancel_hw_scan() from deadlocking
+ */
+void ath10k_reset_scan(unsigned long ptr)
+{
+	struct ath10k *ar = (struct ath10k *)ptr;
+
+	spin_lock_bh(&ar->data_lock);
+	if (!ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		return;
+	}
+
+	ath10k_warn("scan timeout. resetting. fw issue?\n");
+
+	if (ar->scan.is_roc)
+		ieee80211_remain_on_channel_expired(ar->hw);
+	else
+		ieee80211_scan_completed(ar->hw, 1 /* aborted */);
+
+	ar->scan.in_progress = false;
+	complete_all(&ar->scan.completed);
+	spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_abort_scan(struct ath10k *ar)
+{
+	struct wmi_stop_scan_arg arg = {
+		.req_id = 1, /* FIXME */
+		.req_type = WMI_SCAN_STOP_ONE,
+		.u.scan_id = ATH10K_SCAN_ID,
+	};
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	del_timer_sync(&ar->scan.timeout);
+
+	spin_lock_bh(&ar->data_lock);
+	if (!ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		return 0;
+	}
+
+	ar->scan.aborting = true;
+	spin_unlock_bh(&ar->data_lock);
+
+	ret = ath10k_wmi_stop_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn("could not submit wmi stop scan (%d)\n", ret);
+		return -EIO;
+	}
+
+	ath10k_wmi_flush_tx(ar);
+
+	ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
+	if (ret == 0)
+		ath10k_warn("timed out while waiting for scan to stop\n");
+
+	/* scan completion may be done right after we timeout here, so let's
+	 * check the in_progress and tell mac80211 scan is completed. if we
+	 * don't do that and FW fails to send us scan completion indication
+	 * then userspace won't be able to scan anymore */
+	ret = 0;
+
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.in_progress) {
+		ath10k_warn("could not stop scan. its still in progress\n");
+		ar->scan.in_progress = false;
+		ath10k_offchan_tx_purge(ar);
+		ret = -ETIMEDOUT;
+	}
+	spin_unlock_bh(&ar->data_lock);
+
+	return ret;
+}
+
+static int ath10k_start_scan(struct ath10k *ar,
+			     const struct wmi_start_scan_arg *arg)
+{
+	int ret;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	ret = ath10k_wmi_start_scan(ar, arg);
+	if (ret)
+		return ret;
+
+	/* make sure we submit the command so the completion
+	* timeout makes sense */
+	ath10k_wmi_flush_tx(ar);
+
+	ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
+	if (ret == 0) {
+		ath10k_abort_scan(ar);
+		return ret;
+	}
+
+	/* the scan can complete earlier, before we even
+	 * start the timer. in that case the timer handler
+	 * checks ar->scan.in_progress and bails out if its
+	 * false. Add a 200ms margin to account event/command
+	 * processing. */
+	mod_timer(&ar->scan.timeout, jiffies +
+		  msecs_to_jiffies(arg->max_scan_time+200));
+	return 0;
+}
+
+/**********************/
+/* mac80211 callbacks */
+/**********************/
+
+static void ath10k_tx(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_control *control,
+		      struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = NULL;
+	u32 vdev_id = 0;
+	u8 tid;
+
+	if (info->control.vif) {
+		arvif = ath10k_vif_to_arvif(info->control.vif);
+		vdev_id = arvif->vdev_id;
+	} else if (ar->monitor_enabled) {
+		vdev_id = ar->monitor_vdev_id;
+	}
+
+	/* We should disable CCK RATE due to P2P */
+	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
+		ath10k_dbg(ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
+
+	/* we must calculate tid before we apply qos workaround
+	 * as we'd lose the qos control field */
+	tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+	if (ieee80211_is_data_qos(hdr->frame_control) &&
+	    is_unicast_ether_addr(ieee80211_get_DA(hdr))) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+	}
+
+	ath10k_tx_h_qos_workaround(hw, control, skb);
+	ath10k_tx_h_update_wep_key(skb);
+	ath10k_tx_h_add_p2p_noa_ie(ar, skb);
+	ath10k_tx_h_seq_no(skb);
+
+	memset(ATH10K_SKB_CB(skb), 0, sizeof(*ATH10K_SKB_CB(skb)));
+	ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id;
+	ATH10K_SKB_CB(skb)->htt.tid = tid;
+
+	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
+		spin_lock_bh(&ar->data_lock);
+		ATH10K_SKB_CB(skb)->htt.is_offchan = true;
+		ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id;
+		spin_unlock_bh(&ar->data_lock);
+
+		ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb);
+
+		skb_queue_tail(&ar->offchan_tx_queue, skb);
+		ieee80211_queue_work(hw, &ar->offchan_tx_work);
+		return;
+	}
+
+	ath10k_tx_htt(ar, skb);
+}
+
+/*
+ * Initialize various parameters with default vaules.
+ */
+static int ath10k_start(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
+	if (ret)
+		ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
+			    ret);
+
+	ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
+	if (ret)
+		ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
+			    ret);
+
+	return 0;
+}
+
+static void ath10k_stop(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+
+	/* avoid leaks in case FW never confirms scan for offchannel */
+	cancel_work_sync(&ar->offchan_tx_work);
+	ath10k_offchan_tx_purge(ar);
+}
+
+static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct ath10k_generic_iter ar_iter;
+	struct ath10k *ar = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	int ret = 0;
+	u32 flags;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+			   conf->chandef.chan->center_freq);
+		spin_lock_bh(&ar->data_lock);
+		ar->rx_channel = conf->chandef.chan;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS) {
+		memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+		ar_iter.ar = ar;
+		flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+
+		ieee80211_iterate_active_interfaces_atomic(hw,
+							   flags,
+							   ath10k_ps_iter,
+							   &ar_iter);
+
+		ret = ar_iter.ret;
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		if (conf->flags & IEEE80211_CONF_MONITOR)
+			ret = ath10k_monitor_create(ar);
+		else
+			ret = ath10k_monitor_destroy(ar);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+/*
+ * TODO:
+ * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ * because we will send mgmt frames without CCK. This requirement
+ * for P2P_FIND/GO_NEG should be handled by checking CCK flag
+ * in the TX packet.
+ */
+static int ath10k_add_interface(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	enum wmi_sta_powersave_param param;
+	int ret = 0;
+	u32 value;
+	int bit;
+
+	mutex_lock(&ar->conf_mutex);
+
+	arvif->ar = ar;
+	arvif->vif = vif;
+
+	if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) {
+		ath10k_warn("Only one monitor interface allowed\n");
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	bit = ffs(ar->free_vdev_map);
+	if (bit == 0) {
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	arvif->vdev_id = bit - 1;
+	arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+	ar->free_vdev_map &= ~(1 << arvif->vdev_id);
+
+	if (ar->p2p)
+		arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_STATION:
+		arvif->vdev_type = WMI_VDEV_TYPE_STA;
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
+		break;
+	case NL80211_IFTYPE_AP:
+		arvif->vdev_type = WMI_VDEV_TYPE_AP;
+
+		if (vif->p2p)
+			arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
+
+	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
+				     arvif->vdev_subtype, vif->addr);
+	if (ret) {
+		ath10k_warn("WMI vdev create failed: ret %d\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_wmi_vdev_set_param(ar, 0, WMI_VDEV_PARAM_DEF_KEYID,
+					arvif->def_wep_key_index);
+	if (ret)
+		ath10k_warn("Failed to set default keyid: %d\n", ret);
+
+	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+					ATH10K_HW_TXRX_NATIVE_WIFI);
+	if (ret)
+		ath10k_warn("Failed to set TX encap: %d\n", ret);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
+		if (ret) {
+			ath10k_warn("Failed to create peer for AP: %d\n", ret);
+			goto exit;
+		}
+	}
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
+		param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
+		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret)
+			ath10k_warn("Failed to set RX wake policy: %d\n", ret);
+
+		param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+		value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret)
+			ath10k_warn("Failed to set TX wake thresh: %d\n", ret);
+
+		param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+		value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+		ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+						  param, value);
+		if (ret)
+			ath10k_warn("Failed to set PSPOLL count: %d\n", ret);
+	}
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+		ar->monitor_present = true;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_remove_interface(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
+
+	ar->free_vdev_map |= 1 << (arvif->vdev_id);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+		ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
+		if (ret)
+			ath10k_warn("Failed to remove peer for AP: %d\n", ret);
+
+		kfree(arvif->u.ap.noa_data);
+	}
+
+	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+	if (ret)
+		ath10k_warn("WMI vdev delete failed: %d\n", ret);
+
+	if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+		ar->monitor_present = false;
+
+	ath10k_peer_cleanup(ar, arvif->vdev_id);
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+/*
+ * FIXME: Has to be verified.
+ */
+#define SUPPORTED_FILTERS			\
+	(FIF_PROMISC_IN_BSS |			\
+	FIF_ALLMULTI |				\
+	FIF_CONTROL |				\
+	FIF_PSPOLL |				\
+	FIF_OTHER_BSS |				\
+	FIF_BCN_PRBRESP_PROMISC |		\
+	FIF_PROBE_REQ |				\
+	FIF_FCSFAIL)
+
+static void ath10k_configure_filter(struct ieee80211_hw *hw,
+				    unsigned int changed_flags,
+				    unsigned int *total_flags,
+				    u64 multicast)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	changed_flags &= SUPPORTED_FILTERS;
+	*total_flags &= SUPPORTED_FILTERS;
+	ar->filter_flags = *total_flags;
+
+	if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
+	    !ar->monitor_enabled) {
+		ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
+		if (ret)
+			ath10k_warn("Unable to start monitor mode\n");
+		else
+			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
+	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
+		   ar->monitor_enabled) {
+		ret = ath10k_monitor_stop(ar);
+		if (ret)
+			ath10k_warn("Unable to stop monitor mode\n");
+		else
+			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_bss_conf *info,
+				    u32 changed)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (changed & BSS_CHANGED_IBSS)
+		ath10k_control_ibss(arvif, info, vif->addr);
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		arvif->beacon_interval = info->beacon_int;
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_BEACON_INTERVAL,
+						arvif->beacon_interval);
+		if (ret)
+			ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Beacon interval: %d set for VDEV: %d\n",
+				   arvif->beacon_interval, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_BEACON) {
+		ret = ath10k_wmi_pdev_set_param(ar,
+						WMI_PDEV_PARAM_BEACON_TX_MODE,
+						WMI_BEACON_STAGGERED_MODE);
+		if (ret)
+			ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set staggered beacon mode for VDEV: %d\n",
+				   arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_DTIM_PERIOD) {
+		arvif->dtim_period = info->dtim_period;
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_DTIM_PERIOD,
+						arvif->dtim_period);
+		if (ret)
+			ath10k_warn("Failed to set dtim period for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set dtim period: %d for VDEV: %d\n",
+				   arvif->dtim_period, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_SSID &&
+	    vif->type == NL80211_IFTYPE_AP) {
+		arvif->u.ap.ssid_len = info->ssid_len;
+		if (info->ssid_len)
+			memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
+		arvif->u.ap.hidden_ssid = info->hidden_ssid;
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		if (!is_zero_ether_addr(info->bssid)) {
+			ret = ath10k_peer_create(ar, arvif->vdev_id,
+						 info->bssid);
+			if (ret)
+				ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
+					    info->bssid, arvif->vdev_id);
+			else
+				ath10k_dbg(ATH10K_DBG_MAC,
+					   "Added peer: %pM for VDEV: %d\n",
+					   info->bssid, arvif->vdev_id);
+
+
+			if (vif->type == NL80211_IFTYPE_STATION) {
+				/*
+				 * this is never erased as we it for crypto key
+				 * clearing; this is FW requirement
+				 */
+				memcpy(arvif->u.sta.bssid, info->bssid,
+				       ETH_ALEN);
+
+				ret = ath10k_vdev_start(arvif);
+				if (!ret)
+					ath10k_dbg(ATH10K_DBG_MAC,
+						   "VDEV: %d started with BSSID: %pM\n",
+						   arvif->vdev_id, info->bssid);
+			}
+
+			/*
+			 * Mac80211 does not keep IBSS bssid when leaving IBSS,
+			 * so driver need to store it. It is needed when leaving
+			 * IBSS in order to remove BSSID peer.
+			 */
+			if (vif->type == NL80211_IFTYPE_ADHOC)
+				memcpy(arvif->u.ibss.bssid, info->bssid,
+				       ETH_ALEN);
+		}
+	}
+
+	if (changed & BSS_CHANGED_BEACON_ENABLED)
+		ath10k_control_beaconing(arvif, info);
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		u32 cts_prot;
+		if (info->use_cts_prot)
+			cts_prot = 1;
+		else
+			cts_prot = 0;
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_ENABLE_RTSCTS,
+						cts_prot);
+		if (ret)
+			ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set CTS prot: %d for VDEV: %d\n",
+				   cts_prot, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		u32 slottime;
+		if (info->use_short_slot)
+			slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */
+
+		else
+			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_SLOT_TIME,
+						slottime);
+		if (ret)
+			ath10k_warn("Failed to set erp slot for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set slottime: %d for VDEV: %d\n",
+				   slottime, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		u32 preamble;
+		if (info->use_short_preamble)
+			preamble = WMI_VDEV_PREAMBLE_SHORT;
+		else
+			preamble = WMI_VDEV_PREAMBLE_LONG;
+
+		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+						WMI_VDEV_PARAM_PREAMBLE,
+						preamble);
+		if (ret)
+			ath10k_warn("Failed to set preamble for VDEV: %d\n",
+				    arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Set preamble: %d for VDEV: %d\n",
+				   preamble, arvif->vdev_id);
+	}
+
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (info->assoc)
+			ath10k_bss_assoc(hw, vif, info);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_hw_scan(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif,
+			  struct cfg80211_scan_request *req)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_start_scan_arg arg;
+	int ret = 0;
+	int i;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	INIT_COMPLETION(ar->scan.started);
+	INIT_COMPLETION(ar->scan.completed);
+	ar->scan.in_progress = true;
+	ar->scan.aborting = false;
+	ar->scan.is_roc = false;
+	ar->scan.vdev_id = arvif->vdev_id;
+	spin_unlock_bh(&ar->data_lock);
+
+	memset(&arg, 0, sizeof(arg));
+	ath10k_wmi_start_scan_init(ar, &arg);
+	arg.vdev_id = arvif->vdev_id;
+	arg.scan_id = ATH10K_SCAN_ID;
+
+	if (!req->no_cck)
+		arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
+
+	if (req->ie_len) {
+		arg.ie_len = req->ie_len;
+		memcpy(arg.ie, req->ie, arg.ie_len);
+	}
+
+	if (req->n_ssids) {
+		arg.n_ssids = req->n_ssids;
+		for (i = 0; i < arg.n_ssids; i++) {
+			arg.ssids[i].len  = req->ssids[i].ssid_len;
+			arg.ssids[i].ssid = req->ssids[i].ssid;
+		}
+	}
+
+	if (req->n_channels) {
+		arg.n_channels = req->n_channels;
+		for (i = 0; i < arg.n_channels; i++)
+			arg.channels[i] = req->channels[i]->center_freq;
+	}
+
+	ret = ath10k_start_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn("could not start hw scan (%d)\n", ret);
+		spin_lock_bh(&ar->data_lock);
+		ar->scan.in_progress = false;
+		spin_unlock_bh(&ar->data_lock);
+	}
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+	ret = ath10k_abort_scan(ar);
+	if (ret) {
+		ath10k_warn("couldn't abort scan (%d). forcefully sending scan completion to mac80211\n",
+			    ret);
+		ieee80211_scan_completed(hw, 1 /* aborted */);
+	}
+	mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+			  struct ieee80211_key_conf *key)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct ath10k_peer *peer;
+	const u8 *peer_addr;
+	bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+		      key->cipher == WLAN_CIPHER_SUITE_WEP104;
+	int ret = 0;
+
+	if (key->keyidx > WMI_MAX_KEY_INDEX)
+		return -ENOSPC;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (sta)
+		peer_addr = sta->addr;
+	else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+		peer_addr = vif->bss_conf.bssid;
+	else
+		peer_addr = vif->addr;
+
+	key->hw_key_idx = key->keyidx;
+
+	/* the peer should not disappear in mid-way (unless FW goes awry) since
+	 * we already hold conf_mutex. we just make sure its there now. */
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+	spin_unlock_bh(&ar->data_lock);
+
+	if (!peer) {
+		if (cmd == SET_KEY) {
+			ath10k_warn("cannot install key for non-existent peer %pM\n",
+				    peer_addr);
+			ret = -EOPNOTSUPP;
+			goto exit;
+		} else {
+			/* if the peer doesn't exist there is no key to disable
+			 * anymore */
+			goto exit;
+		}
+	}
+
+	if (is_wep) {
+		if (cmd == SET_KEY)
+			arvif->wep_keys[key->keyidx] = key;
+		else
+			arvif->wep_keys[key->keyidx] = NULL;
+
+		if (cmd == DISABLE_KEY)
+			ath10k_clear_vdev_key(arvif, key);
+	}
+
+	ret = ath10k_install_key(arvif, key, cmd, peer_addr);
+	if (ret) {
+		ath10k_warn("ath10k_install_key failed (%d)\n", ret);
+		goto exit;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+	if (peer && cmd == SET_KEY)
+		peer->keys[key->keyidx] = key;
+	else if (peer && cmd == DISABLE_KEY)
+		peer->keys[key->keyidx] = NULL;
+	else if (peer == NULL)
+		/* impossible unless FW goes crazy */
+		ath10k_warn("peer %pM disappeared!\n", peer_addr);
+	spin_unlock_bh(&ar->data_lock);
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_sta_state(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta,
+			    enum ieee80211_sta_state old_state,
+			    enum ieee80211_sta_state new_state)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret = 0;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (old_state == IEEE80211_STA_NOTEXIST &&
+	    new_state == IEEE80211_STA_NONE &&
+	    vif->type != NL80211_IFTYPE_STATION) {
+		/*
+		 * New station addition.
+		 */
+		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
+		if (ret)
+			ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
+				    sta->addr, arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Added peer: %pM for VDEV: %d\n",
+				   sta->addr, arvif->vdev_id);
+	} else if ((old_state == IEEE80211_STA_NONE &&
+		    new_state == IEEE80211_STA_NOTEXIST)) {
+		/*
+		 * Existing station deletion.
+		 */
+		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+		if (ret)
+			ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
+				    sta->addr, arvif->vdev_id);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Removed peer: %pM for VDEV: %d\n",
+				   sta->addr, arvif->vdev_id);
+
+		if (vif->type == NL80211_IFTYPE_STATION)
+			ath10k_bss_disassoc(hw, vif);
+	} else if (old_state == IEEE80211_STA_AUTH &&
+		   new_state == IEEE80211_STA_ASSOC &&
+		   (vif->type == NL80211_IFTYPE_AP ||
+		    vif->type == NL80211_IFTYPE_ADHOC)) {
+		/*
+		 * New association.
+		 */
+		ret = ath10k_station_assoc(ar, arvif, sta);
+		if (ret)
+			ath10k_warn("Failed to associate station: %pM\n",
+				    sta->addr);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Station %pM moved to assoc state\n",
+				   sta->addr);
+	} else if (old_state == IEEE80211_STA_ASSOC &&
+		   new_state == IEEE80211_STA_AUTH &&
+		   (vif->type == NL80211_IFTYPE_AP ||
+		    vif->type == NL80211_IFTYPE_ADHOC)) {
+		/*
+		 * Disassociation.
+		 */
+		ret = ath10k_station_disassoc(ar, arvif, sta);
+		if (ret)
+			ath10k_warn("Failed to disassociate station: %pM\n",
+				    sta->addr);
+		else
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "Station %pM moved to disassociated state\n",
+				   sta->addr);
+	}
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
+				 u16 ac, bool enable)
+{
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	u32 value = 0;
+	int ret = 0;
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+		return 0;
+
+	switch (ac) {
+	case IEEE80211_AC_VO:
+		value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
+		break;
+	case IEEE80211_AC_VI:
+		value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
+		break;
+	case IEEE80211_AC_BE:
+		value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
+		break;
+	case IEEE80211_AC_BK:
+		value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
+			WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
+		break;
+	}
+
+	if (enable)
+		arvif->u.sta.uapsd |= value;
+	else
+		arvif->u.sta.uapsd &= ~value;
+
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  WMI_STA_PS_PARAM_UAPSD,
+					  arvif->u.sta.uapsd);
+	if (ret) {
+		ath10k_warn("could not set uapsd params %d\n", ret);
+		goto exit;
+	}
+
+	if (arvif->u.sta.uapsd)
+		value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
+	else
+		value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+
+	ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+					  WMI_STA_PS_PARAM_RX_WAKE_POLICY,
+					  value);
+	if (ret)
+		ath10k_warn("could not set rx wake param %d\n", ret);
+
+exit:
+	return ret;
+}
+
+static int ath10k_conf_tx(struct ieee80211_hw *hw,
+			  struct ieee80211_vif *vif, u16 ac,
+			  const struct ieee80211_tx_queue_params *params)
+{
+	struct ath10k *ar = hw->priv;
+	struct wmi_wmm_params_arg *p = NULL;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	switch (ac) {
+	case IEEE80211_AC_VO:
+		p = &ar->wmm_params.ac_vo;
+		break;
+	case IEEE80211_AC_VI:
+		p = &ar->wmm_params.ac_vi;
+		break;
+	case IEEE80211_AC_BE:
+		p = &ar->wmm_params.ac_be;
+		break;
+	case IEEE80211_AC_BK:
+		p = &ar->wmm_params.ac_bk;
+		break;
+	}
+
+	if (WARN_ON(!p)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	p->cwmin = params->cw_min;
+	p->cwmax = params->cw_max;
+	p->aifs = params->aifs;
+
+	/*
+	 * The channel time duration programmed in the HW is in absolute
+	 * microseconds, while mac80211 gives the txop in units of
+	 * 32 microseconds.
+	 */
+	p->txop = params->txop * 32;
+
+	/* FIXME: FW accepts wmm params per hw, not per vif */
+	ret = ath10k_wmi_pdev_set_wmm_params(ar, &ar->wmm_params);
+	if (ret) {
+		ath10k_warn("could not set wmm params %d\n", ret);
+		goto exit;
+	}
+
+	ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
+	if (ret)
+		ath10k_warn("could not set sta uapsd %d\n", ret);
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+#define ATH10K_ROC_TIMEOUT_HZ (2*HZ)
+
+static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_channel *chan,
+				    int duration,
+				    enum ieee80211_roc_type type)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_start_scan_arg arg;
+	int ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.in_progress) {
+		spin_unlock_bh(&ar->data_lock);
+		ret = -EBUSY;
+		goto exit;
+	}
+
+	INIT_COMPLETION(ar->scan.started);
+	INIT_COMPLETION(ar->scan.completed);
+	INIT_COMPLETION(ar->scan.on_channel);
+	ar->scan.in_progress = true;
+	ar->scan.aborting = false;
+	ar->scan.is_roc = true;
+	ar->scan.vdev_id = arvif->vdev_id;
+	ar->scan.roc_freq = chan->center_freq;
+	spin_unlock_bh(&ar->data_lock);
+
+	memset(&arg, 0, sizeof(arg));
+	ath10k_wmi_start_scan_init(ar, &arg);
+	arg.vdev_id = arvif->vdev_id;
+	arg.scan_id = ATH10K_SCAN_ID;
+	arg.n_channels = 1;
+	arg.channels[0] = chan->center_freq;
+	arg.dwell_time_active = duration;
+	arg.dwell_time_passive = duration;
+	arg.max_scan_time = 2 * duration;
+	arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+	arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+
+	ret = ath10k_start_scan(ar, &arg);
+	if (ret) {
+		ath10k_warn("could not start roc scan (%d)\n", ret);
+		spin_lock_bh(&ar->data_lock);
+		ar->scan.in_progress = false;
+		spin_unlock_bh(&ar->data_lock);
+		goto exit;
+	}
+
+	ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ);
+	if (ret == 0) {
+		ath10k_warn("could not switch to channel for roc scan\n");
+		ath10k_abort_scan(ar);
+		ret = -ETIMEDOUT;
+		goto exit;
+	}
+
+	ret = 0;
+exit:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+	struct ath10k *ar = hw->priv;
+
+	mutex_lock(&ar->conf_mutex);
+	ath10k_abort_scan(ar);
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+/*
+ * Both RTS and Fragmentation threshold are interface-specific
+ * in ath10k, but device-specific in mac80211.
+ */
+static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath10k_generic_iter *ar_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	u32 rts = ar_iter->ar->hw->wiphy->rts_threshold;
+
+	rts = min_t(u32, rts, ATH10K_RTS_MAX);
+
+	ar_iter->ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id,
+						 WMI_VDEV_PARAM_RTS_THRESHOLD,
+						 rts);
+	if (ar_iter->ret)
+		ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
+			    arvif->vdev_id);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "Set RTS threshold: %d for VDEV: %d\n",
+			   rts, arvif->vdev_id);
+}
+
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct ath10k_generic_iter ar_iter;
+	struct ath10k *ar = hw->priv;
+
+	memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+	ar_iter.ar = ar;
+
+	mutex_lock(&ar->conf_mutex);
+	ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+					    ath10k_set_rts_iter, &ar_iter);
+	mutex_unlock(&ar->conf_mutex);
+
+	return ar_iter.ret;
+}
+
+static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+	struct ath10k_generic_iter *ar_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	u32 frag = ar_iter->ar->hw->wiphy->frag_threshold;
+	int ret;
+
+	frag = clamp_t(u32, frag,
+		       ATH10K_FRAGMT_THRESHOLD_MIN,
+		       ATH10K_FRAGMT_THRESHOLD_MAX);
+
+	ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id,
+					WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+					frag);
+
+	ar_iter->ret = ret;
+	if (ar_iter->ret)
+		ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
+			    arvif->vdev_id);
+	else
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "Set frag threshold: %d for VDEV: %d\n",
+			   frag, arvif->vdev_id);
+}
+
+static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct ath10k_generic_iter ar_iter;
+	struct ath10k *ar = hw->priv;
+
+	memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+	ar_iter.ar = ar;
+
+	mutex_lock(&ar->conf_mutex);
+	ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+					    ath10k_set_frag_iter, &ar_iter);
+	mutex_unlock(&ar->conf_mutex);
+
+	return ar_iter.ret;
+}
+
+static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
+{
+	struct ath10k *ar = hw->priv;
+	int ret;
+
+	/* mac80211 doesn't care if we really xmit queued frames or not
+	 * we'll collect those frames either way if we stop/delete vdevs */
+	if (drop)
+		return;
+
+	ret = wait_event_timeout(ar->htt->empty_tx_wq, ({
+			bool empty;
+			spin_lock_bh(&ar->htt->tx_lock);
+			empty = bitmap_empty(ar->htt->used_msdu_ids,
+					     ar->htt->max_num_pending_tx);
+			spin_unlock_bh(&ar->htt->tx_lock);
+			(empty);
+		}), ATH10K_FLUSH_TIMEOUT_HZ);
+	if (ret <= 0)
+		ath10k_warn("tx not flushed\n");
+}
+
+/* TODO: Implement this function properly
+ * For now it is needed to reply to Probe Requests in IBSS mode.
+ * Propably we need this information from FW.
+ */
+static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	return 1;
+}
+
+static const struct ieee80211_ops ath10k_ops = {
+	.tx				= ath10k_tx,
+	.start				= ath10k_start,
+	.stop				= ath10k_stop,
+	.config				= ath10k_config,
+	.add_interface			= ath10k_add_interface,
+	.remove_interface		= ath10k_remove_interface,
+	.configure_filter		= ath10k_configure_filter,
+	.bss_info_changed		= ath10k_bss_info_changed,
+	.hw_scan			= ath10k_hw_scan,
+	.cancel_hw_scan			= ath10k_cancel_hw_scan,
+	.set_key			= ath10k_set_key,
+	.sta_state			= ath10k_sta_state,
+	.conf_tx			= ath10k_conf_tx,
+	.remain_on_channel		= ath10k_remain_on_channel,
+	.cancel_remain_on_channel	= ath10k_cancel_remain_on_channel,
+	.set_rts_threshold		= ath10k_set_rts_threshold,
+	.set_frag_threshold		= ath10k_set_frag_threshold,
+	.flush				= ath10k_flush,
+	.tx_last_beacon			= ath10k_tx_last_beacon,
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+	.bitrate		= (_rate), \
+	.flags			= (_flags), \
+	.hw_value		= (_rateid), \
+}
+
+#define CHAN2G(_channel, _freq, _flags) { \
+	.band			= IEEE80211_BAND_2GHZ, \
+	.hw_value		= (_channel), \
+	.center_freq		= (_freq), \
+	.flags			= (_flags), \
+	.max_antenna_gain	= 0, \
+	.max_power		= 30, \
+}
+
+#define CHAN5G(_channel, _freq, _flags) { \
+	.band			= IEEE80211_BAND_5GHZ, \
+	.hw_value		= (_channel), \
+	.center_freq		= (_freq), \
+	.flags			= (_flags), \
+	.max_antenna_gain	= 0, \
+	.max_power		= 30, \
+}
+
+static const struct ieee80211_channel ath10k_2ghz_channels[] = {
+	CHAN2G(1, 2412, 0),
+	CHAN2G(2, 2417, 0),
+	CHAN2G(3, 2422, 0),
+	CHAN2G(4, 2427, 0),
+	CHAN2G(5, 2432, 0),
+	CHAN2G(6, 2437, 0),
+	CHAN2G(7, 2442, 0),
+	CHAN2G(8, 2447, 0),
+	CHAN2G(9, 2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+static const struct ieee80211_channel ath10k_5ghz_channels[] = {
+	CHAN5G(36, 5180, 14),
+	CHAN5G(40, 5200, 15),
+	CHAN5G(44, 5220, 16),
+	CHAN5G(48, 5240, 17),
+	CHAN5G(52, 5260, 18),
+	CHAN5G(56, 5280, 19),
+	CHAN5G(60, 5300, 20),
+	CHAN5G(64, 5320, 21),
+	CHAN5G(100, 5500, 22),
+	CHAN5G(104, 5520, 23),
+	CHAN5G(108, 5540, 24),
+	CHAN5G(112, 5560, 25),
+	CHAN5G(116, 5580, 26),
+	CHAN5G(120, 5600, 27),
+	CHAN5G(124, 5620, 28),
+	CHAN5G(128, 5640, 29),
+	CHAN5G(132, 5660, 30),
+	CHAN5G(136, 5680, 31),
+	CHAN5G(140, 5700, 32),
+	CHAN5G(149, 5745, 33),
+	CHAN5G(153, 5765, 34),
+	CHAN5G(157, 5785, 35),
+	CHAN5G(161, 5805, 36),
+	CHAN5G(165, 5825, 37),
+};
+
+static struct ieee80211_rate ath10k_rates[] = {
+	/* CCK */
+	RATETAB_ENT(10,  0x82, 0),
+	RATETAB_ENT(20,  0x84, 0),
+	RATETAB_ENT(55,  0x8b, 0),
+	RATETAB_ENT(110, 0x96, 0),
+	/* OFDM */
+	RATETAB_ENT(60,  0x0c, 0),
+	RATETAB_ENT(90,  0x12, 0),
+	RATETAB_ENT(120, 0x18, 0),
+	RATETAB_ENT(180, 0x24, 0),
+	RATETAB_ENT(240, 0x30, 0),
+	RATETAB_ENT(360, 0x48, 0),
+	RATETAB_ENT(480, 0x60, 0),
+	RATETAB_ENT(540, 0x6c, 0),
+};
+
+#define ath10k_a_rates (ath10k_rates + 4)
+#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4)
+#define ath10k_g_rates (ath10k_rates + 0)
+#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
+
+struct ath10k *ath10k_mac_create(void)
+{
+	struct ieee80211_hw *hw;
+	struct ath10k *ar;
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath10k), &ath10k_ops);
+	if (!hw)
+		return NULL;
+
+	ar = hw->priv;
+	ar->hw = hw;
+
+	return ar;
+}
+
+void ath10k_mac_destroy(struct ath10k *ar)
+{
+	ieee80211_free_hw(ar->hw);
+}
+
+static const struct ieee80211_iface_limit ath10k_if_limits[] = {
+	{
+	.max	= 8,
+	.types	= BIT(NL80211_IFTYPE_STATION)
+		| BIT(NL80211_IFTYPE_P2P_CLIENT)
+		| BIT(NL80211_IFTYPE_P2P_GO)
+		| BIT(NL80211_IFTYPE_AP)
+	}
+};
+
+static const struct ieee80211_iface_combination ath10k_if_comb = {
+	.limits = ath10k_if_limits,
+	.n_limits = ARRAY_SIZE(ath10k_if_limits),
+	.max_interfaces = 8,
+	.num_different_channels = 1,
+	.beacon_int_infra_match = true,
+};
+
+static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
+{
+	struct ieee80211_sta_vht_cap vht_cap = {0};
+	u16 mcs_map;
+
+	vht_cap.vht_supported = 1;
+	vht_cap.cap = ar->vht_cap_info;
+
+	/* FIXME: check dynamically how many streams board supports */
+	mcs_map = IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 |
+		IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 |
+		IEEE80211_VHT_MCS_SUPPORT_0_9 << 4 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
+		IEEE80211_VHT_MCS_NOT_SUPPORTED << 14;
+
+	vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
+	vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
+
+	return vht_cap;
+}
+
+static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
+{
+	int i;
+	struct ieee80211_sta_ht_cap ht_cap = {0};
+
+	if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
+		return ht_cap;
+
+	ht_cap.ht_supported = 1;
+	ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+	ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
+	ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
+		ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
+		ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
+		u32 smps;
+
+		smps   = WLAN_HT_CAP_SM_PS_DYNAMIC;
+		smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+		ht_cap.cap |= smps;
+	}
+
+	if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+		ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
+		u32 stbc;
+
+		stbc   = ar->ht_cap_info;
+		stbc  &= WMI_HT_CAP_RX_STBC;
+		stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
+		stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
+		stbc  &= IEEE80211_HT_CAP_RX_STBC;
+
+		ht_cap.cap |= stbc;
+	}
+
+	if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
+		ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
+		ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
+
+	/* max AMSDU is implicitly taken from vht_cap_info */
+	if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+		ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+	for (i = 0; i < WMI_MAX_SPATIAL_STREAM; i++)
+		ht_cap.mcs.rx_mask[i] = 0xFF;
+
+	ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+
+	return ht_cap;
+}
+
+
+static void ath10k_get_arvif_iter(void *data, u8 *mac,
+				  struct ieee80211_vif *vif)
+{
+	struct ath10k_vif_iter *arvif_iter = data;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+	if (arvif->vdev_id == arvif_iter->vdev_id)
+		arvif_iter->arvif = arvif;
+}
+
+struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
+{
+	struct ath10k_vif_iter arvif_iter;
+	u32 flags;
+
+	memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
+	arvif_iter.vdev_id = vdev_id;
+
+	flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+	ieee80211_iterate_active_interfaces_atomic(ar->hw,
+						   flags,
+						   ath10k_get_arvif_iter,
+						   &arvif_iter);
+	if (!arvif_iter.arvif) {
+		ath10k_warn("No VIF found for VDEV: %d\n", vdev_id);
+		return NULL;
+	}
+
+	return arvif_iter.arvif;
+}
+
+int ath10k_mac_register(struct ath10k *ar)
+{
+	struct ieee80211_supported_band *band;
+	struct ieee80211_sta_vht_cap vht_cap;
+	struct ieee80211_sta_ht_cap ht_cap;
+	void *channels;
+	int ret;
+
+	SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
+
+	SET_IEEE80211_DEV(ar->hw, ar->dev);
+
+	ht_cap = ath10k_get_ht_cap(ar);
+	vht_cap = ath10k_create_vht_cap(ar);
+
+	if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+		channels = kmemdup(ath10k_2ghz_channels,
+				   sizeof(ath10k_2ghz_channels),
+				   GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
+
+		band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+		band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
+		band->channels = channels;
+		band->n_bitrates = ath10k_g_rates_size;
+		band->bitrates = ath10k_g_rates;
+		band->ht_cap = ht_cap;
+
+		/* vht is not supported in 2.4 GHz */
+
+		ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+	}
+
+	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
+		channels = kmemdup(ath10k_5ghz_channels,
+				   sizeof(ath10k_5ghz_channels),
+				   GFP_KERNEL);
+		if (!channels) {
+			if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+				band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+				kfree(band->channels);
+			}
+			return -ENOMEM;
+		}
+
+		band = &ar->mac.sbands[IEEE80211_BAND_5GHZ];
+		band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+		band->channels = channels;
+		band->n_bitrates = ath10k_a_rates_size;
+		band->bitrates = ath10k_a_rates;
+		band->ht_cap = ht_cap;
+		band->vht_cap = vht_cap;
+		ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+	}
+
+	ar->hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_P2P_CLIENT) |
+		BIT(NL80211_IFTYPE_P2P_GO);
+
+	ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+			IEEE80211_HW_SUPPORTS_PS |
+			IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
+			IEEE80211_HW_SUPPORTS_UAPSD |
+			IEEE80211_HW_MFP_CAPABLE |
+			IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+			IEEE80211_HW_HAS_RATE_CONTROL |
+			IEEE80211_HW_SUPPORTS_STATIC_SMPS |
+			IEEE80211_HW_WANT_MONITOR_VIF |
+			IEEE80211_HW_AP_LINK_PS;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
+		ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
+
+	if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
+		ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+		ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW;
+	}
+
+	ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
+	ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
+
+	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
+
+	ar->hw->channel_change_time = 5000;
+	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
+
+	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
+
+	ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+	/*
+	 * on LL hardware queues are managed entirely by the FW
+	 * so we only advertise to mac we can do the queues thing
+	 */
+	ar->hw->queues = 4;
+
+	ar->hw->wiphy->iface_combinations = &ath10k_if_comb;
+	ar->hw->wiphy->n_iface_combinations = 1;
+
+	ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
+			    ath10k_reg_notifier);
+	if (ret) {
+		ath10k_err("Regulatory initialization failed\n");
+		return ret;
+	}
+
+	ret = ieee80211_register_hw(ar->hw);
+	if (ret) {
+		ath10k_err("ieee80211 registration failed: %d\n", ret);
+		return ret;
+	}
+
+	if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+		ret = regulatory_hint(ar->hw->wiphy,
+				      ar->ath_common.regulatory.alpha2);
+		if (ret)
+			goto exit;
+	}
+
+	return 0;
+exit:
+	ieee80211_unregister_hw(ar->hw);
+	return ret;
+}
+
+void ath10k_mac_unregister(struct ath10k *ar)
+{
+	ieee80211_unregister_hw(ar->hw);
+
+	kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+	kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+	SET_IEEE80211_DEV(ar->hw, NULL);
+}