iwlwifi: generalize iwl4965_send_add_station function

This patch moves iwl4965_send_add_station to iwlcore
under new name iwl_send_add_sta.
Function uses build command handler in order to support
multiple HWs.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 46 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index e5449b8c3359..d16a853f376a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -769,6 +769,20 @@ struct iwl4965_keyinfo {
 	u8 key[16];		/* 16-byte unicast decryption key */
 } __attribute__ ((packed));
 
+/* 5000 */
+struct iwl_keyinfo {
+	__le16 key_flags;
+	u8 tkip_rx_tsc_byte2;	/* TSC[2] for key mix ph1 detection */
+	u8 reserved1;
+	__le16 tkip_rx_ttak[5];	/* 10-byte unicast TKIP TTAK */
+	u8 key_offset;
+	u8 reserved2;
+	u8 key[16];		/* 16-byte unicast decryption key */
+	__le64 tx_secur_seq_cnt;
+	__le64 hw_tkip_mic_rx_key;
+	__le64 hw_tkip_mic_tx_key;
+} __attribute__ ((packed));
+
 /**
  * struct sta_id_modify
  * @addr[ETH_ALEN]: station's MAC address
@@ -844,6 +858,38 @@ struct iwl4965_addsta_cmd {
 	__le32 reserved2;
 } __attribute__ ((packed));
 
+/* 5000 */
+struct iwl_addsta_cmd {
+	u8 mode;		/* 1: modify existing, 0: add new station */
+	u8 reserved[3];
+	struct sta_id_modify sta;
+	struct iwl_keyinfo key;
+	__le32 station_flags;		/* STA_FLG_* */
+	__le32 station_flags_msk;	/* STA_FLG_* */
+
+	/* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+	 * corresponding to bit (e.g. bit 5 controls TID 5).
+	 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+	__le16 tid_disable_tx;
+
+	__le16	reserved1;
+
+	/* TID for which to add block-ack support.
+	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+	u8 add_immediate_ba_tid;
+
+	/* TID for which to remove block-ack support.
+	 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+	u8 remove_immediate_ba_tid;
+
+	/* Starting Sequence Number for added block-ack support.
+	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+	__le16 add_immediate_ba_ssn;
+
+	__le32 reserved2;
+} __attribute__ ((packed));
+
+
 #define ADD_STA_SUCCESS_MSK		0x1
 #define ADD_STA_NO_ROOM_IN_TABLE	0x2
 #define ADD_STA_NO_BLOCK_ACK_RESOURCE	0x4