diff options
| author | Hans de Goede | 2014-07-29 14:23:23 +0200 |
|---|---|---|
| committer | John W. Linville | 2014-07-29 10:32:57 -0400 |
| commit | 568ba389be505f505b7fbeedb9ab4ece27603fc9 (patch) | |
| tree | 0144b1c11a9a4e22dd7ff2582ce03a384b6f3f4e /drivers/net/wireless | |
| parent | cf9ae8fa0110546c928836957bc54d42fea7828b (diff) | |
brcmfmac: Fix OOB interrupt not working for BCM43362
It has taken me a long long time to get the OOB interrupt working on the
AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the
end I found these magic register pokes in the cubietruck kernel tree:
https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a
This is also done for the bcm43362 in broadcom's internal/proprietary driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
[arend@broadcom.com: rebased changing BCM43362 chip id to fix compilation]
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index dc2db47a1c73..8dbd5dbb78fd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -38,7 +38,9 @@ #include <brcm_hw_ids.h> #include <brcmu_utils.h> #include <brcmu_wifi.h> +#include <chipcommon.h> #include <soc.h> +#include "chip.h" #include "dhd_bus.h" #include "dhd_dbg.h" #include "sdio_host.h" @@ -118,6 +120,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) { int ret = 0; u8 data; + u32 addr, gpiocontrol; unsigned long flags; if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { @@ -147,6 +150,19 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) sdio_claim_host(sdiodev->func[1]); + if (sdiodev->bus_if->chip == BRCM_CC_43362_CHIP_ID) { + /* assign GPIO to SDIO core */ + addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol); + gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret); + gpiocontrol |= 0x2; + brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret); + + brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf, + &ret); + brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret); + brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret); + } + /* must configure SDIO_CCCR_IENx to enable irq */ data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret); data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; |