diff options
| author | Ciprian Regus | 2024-02-23 18:21:27 +0200 |
|---|---|---|
| committer | Paolo Abeni | 2024-02-27 11:27:20 +0100 |
| commit | 2322467a0f5d6cf05752092938e6db1250a0b28e (patch) | |
| tree | 903f4129e1d6c948bb6cb64e91f4f972970b01c9 /drivers/net | |
| parent | 58cc8640b627558ffd1e6c5c415ff034688e3569 (diff) | |
net: ethernet: adi: adin1110: Reduce the MDIO_TRDONE poll interval
In order to do a clause 22 access to the PHY registers of the ADIN1110,
we have to write the MDIO frame to the ADIN1110_MDIOACC register, and
then poll the MDIO_TRDONE bit (for a 1) in the same register. The
device will set this bit to 1 once the internal MDIO transaction is
done. In practice, this bit takes ~50 - 60 us to be set.
The first attempt to poll the bit is right after the ADIN1110_MDIOACC
register is written, so it will always be read as 0. The next check will
only be done after 10 ms, which will result in the MDIO transactions
taking a long time to complete. Reduce this polling interval to 100 us.
Since this interval is short enough, switch the poll function to
readx_poll_timeout_atomic() instead.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240223162129.154114-1-ciprian.regus@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/adi/adin1110.c | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c index d7c274af6d4d..8b4ef5121308 100644 --- a/drivers/net/ethernet/adi/adin1110.c +++ b/drivers/net/ethernet/adi/adin1110.c @@ -464,8 +464,9 @@ static int adin1110_mdio_read(struct mii_bus *bus, int phy_id, int reg) * bitfield of ADIN1110_MDIOACC register will contain * the requested register value. */ - ret = readx_poll_timeout(adin1110_read_mdio_acc, priv, val, - (val & ADIN1110_MDIO_TRDONE), 10000, 30000); + ret = readx_poll_timeout_atomic(adin1110_read_mdio_acc, priv, val, + (val & ADIN1110_MDIO_TRDONE), + 100, 30000); if (ret < 0) return ret; @@ -495,8 +496,9 @@ static int adin1110_mdio_write(struct mii_bus *bus, int phy_id, if (ret < 0) return ret; - return readx_poll_timeout(adin1110_read_mdio_acc, priv, val, - (val & ADIN1110_MDIO_TRDONE), 10000, 30000); + return readx_poll_timeout_atomic(adin1110_read_mdio_acc, priv, val, + (val & ADIN1110_MDIO_TRDONE), + 100, 30000); } /* ADIN1110 MAC-PHY contains an ADIN1100 PHY. |