diff options
| author | Tristram Ha | 2018-12-19 18:59:31 -0800 |
|---|---|---|
| committer | David S. Miller | 2018-12-20 16:19:29 -0800 |
| commit | 962ad710f7d64d441c4e02c0e9e5fddd1aeb54b7 (patch) | |
| tree | ab908f9bda3feb144430e3b3f7e94a7355e0b2f9 /drivers/net | |
| parent | 3a6d528a5e0179b1e8b20033c5cb7384dd7a830d (diff) | |
net: dsa: microchip: fix unicast frame leak
Port partitioning is done by enabling UNICAST_VLAN_BOUNDARY and changing
the default port membership of 0x7f to other values such that there is
no communication between ports. In KSZ9477 the member for port 1 is
0x41; port 2, 0x42; port 3, 0x44; port 4, 0x48; port 5, 0x50; and port 7,
0x60. Port 6 is the host port.
Setting a zero value can be used to stop port from receiving.
However, when UNICAST_VLAN_BOUNDARY is disabled and the unicast addresses
are already learned in the dynamic MAC table, setting zero still allows
devices connected to those ports to communicate. This does not apply to
multicast and broadcast addresses though. To prevent these leaks and
make the function of port membership consistent UNICAST_VLAN_BOUNDARY
should never be disabled.
Note that UNICAST_VLAN_BOUNDARY is enabled by default in KSZ9477.
Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 57a146a0dd4a..89ed059bb576 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -500,13 +500,9 @@ static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port, if (flag) { ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_VLAN_LOOKUP_VID_0, true); - ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, - true); ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); } else { ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); - ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, - false); ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_VLAN_LOOKUP_VID_0, false); } @@ -1130,6 +1126,10 @@ static int ksz9477_setup(struct dsa_switch *ds) return ret; } + /* Required for port partitioning. */ + ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, + true); + /* accept packet up to 2000bytes */ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true); |