diff options
author | Jakub Kicinski | 2023-10-10 19:45:59 -0700 |
---|---|---|
committer | Jakub Kicinski | 2023-10-10 19:46:00 -0700 |
commit | b52acd02c1dc5eb7bf3fb4da094687a3b26497aa (patch) | |
tree | 3f2ce83da18744965efebdecaccfa4098242c044 /drivers/net | |
parent | 31c07dffafce914c1d1543c135382a11ff058d93 (diff) | |
parent | c881047071547f4442aae72a6a45140d373b5cb0 (diff) |
Merge tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-10-09
Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state
detection and wait behavior.
John Watts contributes a patch to only show the sun4i_can Kconfig
option on ARCH_SUNXI.
A patch by Miquel Raynal fixes the soft-reset workaround for Renesas
SoCs in the sja1000 driver.
Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver
fixes the id2 register for the tcan4553.
2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC.
* tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: Fix id2_register for tcan4553
can: flexcan: remove the auto stop mode for IMX93
can: sja1000: Always restart the Tx queue after an overrun
arm64: dts: imx93: add the Flex-CAN stop mode by GPR
can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set
can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior
====================
Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/can/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/can/flexcan/flexcan-core.c | 46 | ||||
-rw-r--r-- | drivers/net/can/flexcan/flexcan.h | 2 | ||||
-rw-r--r-- | drivers/net/can/m_can/tcan4x5x-core.c | 2 | ||||
-rw-r--r-- | drivers/net/can/sja1000/sja1000.c | 8 |
5 files changed, 22 insertions, 38 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 649453a3c858..f8cde9f9f554 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -190,7 +190,7 @@ config CAN_SLCAN config CAN_SUN4I tristate "Allwinner A10 CAN controller" - depends on MACH_SUN4I || MACH_SUN7I || RISCV || COMPILE_TEST + depends on MACH_SUN4I || MACH_SUN7I || (RISCV && ARCH_SUNXI) || COMPILE_TEST help Say Y here if you want to use CAN controller found on Allwinner A10/A20/D1 SoCs. diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index add39e922b89..d15f85a40c1e 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -348,7 +348,7 @@ static struct flexcan_devtype_data fsl_imx8mp_devtype_data = { static struct flexcan_devtype_data fsl_imx93_devtype_data = { .quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS | FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX | - FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_AUTO_STOP_MODE | + FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR | FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC | FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR, @@ -544,11 +544,6 @@ static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv) } else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR) { regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr, 1 << priv->stm.req_bit, 1 << priv->stm.req_bit); - } else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE) { - /* For the auto stop mode, software do nothing, hardware will cover - * all the operation automatically after system go into low power mode. - */ - return 0; } return flexcan_low_power_enter_ack(priv); @@ -574,12 +569,6 @@ static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv) reg_mcr &= ~FLEXCAN_MCR_SLF_WAK; priv->write(reg_mcr, ®s->mcr); - /* For the auto stop mode, hardware will exist stop mode - * automatically after system go out of low power mode. - */ - if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE) - return 0; - return flexcan_low_power_exit_ack(priv); } @@ -1994,13 +1983,18 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev) ret = flexcan_setup_stop_mode_scfw(pdev); else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR) ret = flexcan_setup_stop_mode_gpr(pdev); - else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE) - ret = 0; else /* return 0 directly if doesn't support stop mode feature */ return 0; - if (ret) + /* If ret is -EINVAL, this means SoC claim to support stop mode, but + * dts file lack the stop mode property definition. For this case, + * directly return 0, this will skip the wakeup capable setting and + * will not block the driver probe. + */ + if (ret == -EINVAL) + return 0; + else if (ret) return ret; device_set_wakeup_capable(&pdev->dev, true); @@ -2320,16 +2314,8 @@ static int __maybe_unused flexcan_noirq_suspend(struct device *device) if (netif_running(dev)) { int err; - if (device_may_wakeup(device)) { + if (device_may_wakeup(device)) flexcan_enable_wakeup_irq(priv, true); - /* For auto stop mode, need to keep the clock on before - * system go into low power mode. After system go into - * low power mode, hardware will config the flexcan into - * stop mode, and gate off the clock automatically. - */ - if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE) - return 0; - } err = pm_runtime_force_suspend(device); if (err) @@ -2347,15 +2333,9 @@ static int __maybe_unused flexcan_noirq_resume(struct device *device) if (netif_running(dev)) { int err; - /* For the wakeup in auto stop mode, no need to gate on the - * clock here, hardware will do this automatically. - */ - if (!(device_may_wakeup(device) && - priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE)) { - err = pm_runtime_force_resume(device); - if (err) - return err; - } + err = pm_runtime_force_resume(device); + if (err) + return err; if (device_may_wakeup(device)) flexcan_enable_wakeup_irq(priv, false); diff --git a/drivers/net/can/flexcan/flexcan.h b/drivers/net/can/flexcan/flexcan.h index 91402977780b..025c3417031f 100644 --- a/drivers/net/can/flexcan/flexcan.h +++ b/drivers/net/can/flexcan/flexcan.h @@ -68,8 +68,6 @@ #define FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR BIT(15) /* Device supports RX via FIFO */ #define FLEXCAN_QUIRK_SUPPORT_RX_FIFO BIT(16) -/* auto enter stop mode to support wakeup */ -#define FLEXCAN_QUIRK_AUTO_STOP_MODE BIT(17) struct flexcan_devtype_data { u32 quirks; /* quirks needed for different IP cores */ diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c index 8a4143809d33..ae8c42f5debd 100644 --- a/drivers/net/can/m_can/tcan4x5x-core.c +++ b/drivers/net/can/m_can/tcan4x5x-core.c @@ -125,7 +125,7 @@ static const struct tcan4x5x_version_info tcan4x5x_versions[] = { }, [TCAN4553] = { .name = "4553", - .id2_register = 0x32353534, + .id2_register = 0x33353534, }, /* generic version with no id2_register at the end */ [TCAN4X5X] = { diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 0ada0e160e93..743c2eb62b87 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -392,7 +392,13 @@ static irqreturn_t sja1000_reset_interrupt(int irq, void *dev_id) struct net_device *dev = (struct net_device *)dev_id; netdev_dbg(dev, "performing a soft reset upon overrun\n"); - sja1000_start(dev); + + netif_tx_lock(dev); + + can_free_echo_skb(dev, 0, NULL); + sja1000_set_mode(dev, CAN_MODE_START); + + netif_tx_unlock(dev); return IRQ_HANDLED; } |