diff options
| author | Alex Marginean | 2021-03-07 15:23:38 +0200 |
|---|---|---|
| committer | David S. Miller | 2021-03-08 12:03:42 -0800 |
| commit | 1b2395dfff5bb40228a187f21f577cd90673d344 (patch) | |
| tree | 14fb6d7369019d54757954911f8905b06792ff64 /drivers/net | |
| parent | 2e2696223676d56db1a93acfca722c1b96cd552d (diff) | |
net: enetc: set MAC RX FIFO to recommended value
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc_hw.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc_pf.c | 6 |
2 files changed, 8 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h index de0d20b0f489..00938f7960a4 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h @@ -234,6 +234,8 @@ enum enetc_bdr_type {TX, RX}; #define ENETC_PM0_MAXFRM 0x8014 #define ENETC_SET_TX_MTU(val) ((val) << 16) #define ENETC_SET_MAXFRM(val) ((val) & 0xffff) +#define ENETC_PM0_RX_FIFO 0x801c +#define ENETC_PM0_RX_FIFO_VAL 1 #define ENETC_PM_IMDIO_BASE 0x8030 diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index ca02f033bea2..224fc37a6757 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -490,6 +490,12 @@ static void enetc_configure_port_mac(struct enetc_hw *hw) enetc_port_wr(hw, ENETC_PM1_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN | ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC); + + /* On LS1028A, the MAC RX FIFO defaults to 2, which is too high + * and may lead to RX lock-up under traffic. Set it to 1 instead, + * as recommended by the hardware team. + */ + enetc_port_wr(hw, ENETC_PM0_RX_FIFO, ENETC_PM0_RX_FIFO_VAL); } static void enetc_mac_config(struct enetc_hw *hw, phy_interface_t phy_mode) |