diff options
| author | Antoine Tenart | 2019-04-26 18:41:23 +0200 |
|---|---|---|
| committer | David S. Miller | 2019-04-29 23:17:21 -0400 |
| commit | 7a1d8390d015a13c42b1effa1f22fda0858fe6f9 (patch) | |
| tree | 54d7705f781781b46c10e7369dbbe71d3479933d /drivers/net | |
| parent | 88d6272acaaa4bfb03da0a87a8754ec431471680 (diff) | |
net: phy: micrel: make sure the factory test bit is cleared
The KSZ8081 PHY has a factory test mode which is set at the de-assertion
of the reset line based on the RXER (KSZ8081RNA/RND) or TXC
(KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a
pull-up, the factory test mode should be cleared by manually writing a 0
(according to the datasheet). This patch makes sure this factory test
bit is cleared in config_init().
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/phy/micrel.c | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index ddd6b6374d8c..3c8186f269f9 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -28,6 +28,7 @@ /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 +#define KSZPHY_OMSO_FACTORY_TEST BIT(15) #define KSZPHY_OMSO_B_CAST_OFF BIT(9) #define KSZPHY_OMSO_NAND_TREE_ON BIT(5) #define KSZPHY_OMSO_RMII_OVERRIDE BIT(1) @@ -340,6 +341,18 @@ static int ksz8041_config_aneg(struct phy_device *phydev) return genphy_config_aneg(phydev); } +static int ksz8081_config_init(struct phy_device *phydev) +{ + /* KSZPHY_OMSO_FACTORY_TEST is set at de-assertion of the reset line + * based on the RXER (KSZ8081RNA/RND) or TXC (KSZ8081MNX/RNB) pin. If a + * pull-down is missing, the factory test mode should be cleared by + * manually writing a 0. + */ + phy_clear_bits(phydev, MII_KSZPHY_OMSO, KSZPHY_OMSO_FACTORY_TEST); + + return kszphy_config_init(phydev); +} + static int ksz8061_config_init(struct phy_device *phydev) { int ret; @@ -1038,7 +1051,7 @@ static struct phy_driver ksphy_driver[] = { /* PHY_BASIC_FEATURES */ .driver_data = &ksz8081_type, .probe = kszphy_probe, - .config_init = kszphy_config_init, + .config_init = ksz8081_config_init, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, .get_sset_count = kszphy_get_sset_count, |