diff options
author | Linus Torvalds | 2015-04-13 15:45:47 -0700 |
---|---|---|
committer | Linus Torvalds | 2015-04-13 15:45:47 -0700 |
commit | 3be1b98e073bdd4c1bb3144201a927c4a21330ba (patch) | |
tree | 6eb0619a4715d8f83388e8fd7a56f58d1c99f6cf /drivers/of | |
parent | 392b46f31f43a71c5391eb9cffe304979d2d6c30 (diff) | |
parent | 5468d5a64bf1e002e5081fa280186d0eba09fa0e (diff) |
Merge tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Read capability list as dwords, not bytes (Sean O. Stalley)
Resource management
- Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
- Mark invalid BARs as unassigned (Bjorn Helgaas)
- Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
- Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
- Assign resources before drivers claim devices (Yijing Wang)
- Claim bus resources before pci_bus_add_devices() (Yijing Wang)
Power management
- Optimize device state transition delays (Aaron Lu)
- Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)
Virtualization
- Add ACS quirks for Intel 1G NICs (Alex Williamson)
IOMMU
- Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
- Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
- Fix size when dma-range is not used (Murali Karicheri)
- Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
- Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
- Update DMA configuration from DT (Murali Karicheri)
- dma-mapping: limit IOMMU mapping size (Murali Karicheri)
- Calculate device DMA masks based on DT dma-range size (Murali Karicheri)
ARM Versatile host bridge driver
- Check for devm_ioremap_resource() failures (Jisheng Zhang)
Broadcom iProc host bridge driver
- Add Broadcom iProc PCIe driver (Ray Jui)
Marvell MVEBU host bridge driver
- Add suspend/resume support (Thomas Petazzoni)
Renesas R-Car host bridge driver
- Fix position of MSI enable bit (Nobuhiro Iwamatsu)
- Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
- Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
- Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)
Samsung Exynos host bridge driver
- Fix INTx enablement statement termination error (Jaehoon Chung)
Miscellaneous
- Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
- Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)"
* tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits)
PCI: Read capability list as dwords, not bytes
PCI: layerscape: Simplify platform_get_resource_byname() failure checking
PCI: keystone: Don't dereference possible NULL pointer
PCI: versatile: Check for devm_ioremap_resource() failures
PCI: Don't clear ASPM bits when the FADT declares it's unsupported
PCI: Clarify policy for vendor IDs in pci.txt
PCI/ACPI: Optimize device state transition delays
PCI: Export pci_find_host_bridge() for use inside PCI core
PCI: Make a shareable UUID for PCI firmware ACPI _DSM
PCI: Fix typo in Thunderbolt kernel message
PCI: exynos: Fix INTx enablement statement termination error
PCI: iproc: Add Broadcom iProc PCIe support
PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
PCI: Export symbols required for loadable host driver modules
PCI: Add ACS quirks for Intel 1G NICs
PCI: mvebu: Add suspend/resume support
PCI: Cleanup control flow
sparc/PCI: Claim bus resources before pci_bus_add_devices()
PCI: Assign resources before drivers claim devices (pci_scan_root_bus())
PCI: Fail pci_ioremap_bar() on unassigned resources
...
Diffstat (limited to 'drivers/of')
-rw-r--r-- | drivers/of/device.c | 84 | ||||
-rw-r--r-- | drivers/of/of_pci.c | 21 | ||||
-rw-r--r-- | drivers/of/platform.c | 58 |
3 files changed, 107 insertions, 56 deletions
diff --git a/drivers/of/device.c b/drivers/of/device.c index 46d6c75c1404..20c1332a0018 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -2,6 +2,9 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/of_iommu.h> +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/module.h> #include <linux/mod_devicetable.h> @@ -66,6 +69,87 @@ int of_device_add(struct platform_device *ofdev) return device_add(&ofdev->dev); } +/** + * of_dma_configure - Setup DMA configuration + * @dev: Device to apply DMA configuration + * @np: Pointer to OF node having DMA configuration + * + * Try to get devices's DMA configuration from DT and update it + * accordingly. + * + * If platform code needs to use its own special DMA configuration, it + * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events + * to fix up DMA configuration. + */ +void of_dma_configure(struct device *dev, struct device_node *np) +{ + u64 dma_addr, paddr, size; + int ret; + bool coherent; + unsigned long offset; + struct iommu_ops *iommu; + + /* + * Set default coherent_dma_mask to 32 bit. Drivers are expected to + * setup the correct supported mask. + */ + if (!dev->coherent_dma_mask) + dev->coherent_dma_mask = DMA_BIT_MASK(32); + + /* + * Set it to coherent_dma_mask by default if the architecture + * code has not set it. + */ + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; + + ret = of_dma_get_range(np, &dma_addr, &paddr, &size); + if (ret < 0) { + dma_addr = offset = 0; + size = dev->coherent_dma_mask + 1; + } else { + offset = PFN_DOWN(paddr - dma_addr); + + /* + * Add a work around to treat the size as mask + 1 in case + * it is defined in DT as a mask. + */ + if (size & 1) { + dev_warn(dev, "Invalid size 0x%llx for dma-range\n", + size); + size = size + 1; + } + + if (!size) { + dev_err(dev, "Adjusted size 0x%llx invalid\n", size); + return; + } + dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset); + } + + dev->dma_pfn_offset = offset; + + /* + * Limit coherent and dma mask based on size and default mask + * set by the driver. + */ + dev->coherent_dma_mask = min(dev->coherent_dma_mask, + DMA_BIT_MASK(ilog2(dma_addr + size))); + *dev->dma_mask = min((*dev->dma_mask), + DMA_BIT_MASK(ilog2(dma_addr + size))); + + coherent = of_dma_is_coherent(np); + dev_dbg(dev, "device is%sdma coherent\n", + coherent ? " " : " not "); + + iommu = of_iommu_configure(dev, np); + dev_dbg(dev, "device is%sbehind an iommu\n", + iommu ? " " : " not "); + + arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); +} +EXPORT_SYMBOL_GPL(of_dma_configure); + int of_device_register(struct platform_device *pdev) { device_initialize(&pdev->dev); diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c index 62426d81a4d6..5751dc5b6494 100644 --- a/drivers/of/of_pci.c +++ b/drivers/of/of_pci.c @@ -2,6 +2,7 @@ #include <linux/export.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/of_pci.h> #include <linux/slab.h> @@ -116,6 +117,26 @@ int of_get_pci_domain_nr(struct device_node *node) } EXPORT_SYMBOL_GPL(of_get_pci_domain_nr); +/** + * of_pci_dma_configure - Setup DMA configuration + * @dev: ptr to pci_dev struct of the PCI device + * + * Function to update PCI devices's DMA configuration using the same + * info from the OF node of host bridge's parent (if any). + */ +void of_pci_dma_configure(struct pci_dev *pci_dev) +{ + struct device *dev = &pci_dev->dev; + struct device *bridge = pci_get_host_bridge_device(pci_dev); + + if (!bridge->parent) + return; + + of_dma_configure(dev, bridge->parent->of_node); + pci_put_host_bridge_device(bridge); +} +EXPORT_SYMBOL_GPL(of_pci_dma_configure); + #if defined(CONFIG_OF_ADDRESS) /** * of_pci_get_host_bridge_resources - Parse PCI host bridge resources from DT diff --git a/drivers/of/platform.c b/drivers/of/platform.c index b189733a1539..a01f57c9e34e 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -19,7 +19,6 @@ #include <linux/slab.h> #include <linux/of_address.h> #include <linux/of_device.h> -#include <linux/of_iommu.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> @@ -150,59 +149,6 @@ struct platform_device *of_device_alloc(struct device_node *np, } EXPORT_SYMBOL(of_device_alloc); -/** - * of_dma_configure - Setup DMA configuration - * @dev: Device to apply DMA configuration - * - * Try to get devices's DMA configuration from DT and update it - * accordingly. - * - * In case if platform code need to use own special DMA configuration,it - * can use Platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE event - * to fix up DMA configuration. - */ -static void of_dma_configure(struct device *dev) -{ - u64 dma_addr, paddr, size; - int ret; - bool coherent; - unsigned long offset; - struct iommu_ops *iommu; - - /* - * Set default dma-mask to 32 bit. Drivers are expected to setup - * the correct supported dma_mask. - */ - dev->coherent_dma_mask = DMA_BIT_MASK(32); - - /* - * Set it to coherent_dma_mask by default if the architecture - * code has not set it. - */ - if (!dev->dma_mask) - dev->dma_mask = &dev->coherent_dma_mask; - - ret = of_dma_get_range(dev->of_node, &dma_addr, &paddr, &size); - if (ret < 0) { - dma_addr = offset = 0; - size = dev->coherent_dma_mask; - } else { - offset = PFN_DOWN(paddr - dma_addr); - dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset); - } - dev->dma_pfn_offset = offset; - - coherent = of_dma_is_coherent(dev->of_node); - dev_dbg(dev, "device is%sdma coherent\n", - coherent ? " " : " not "); - - iommu = of_iommu_configure(dev); - dev_dbg(dev, "device is%sbehind an iommu\n", - iommu ? " " : " not "); - - arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); -} - static void of_dma_deconfigure(struct device *dev) { arch_teardown_dma_ops(dev); @@ -236,7 +182,7 @@ static struct platform_device *of_platform_device_create_pdata( dev->dev.bus = &platform_bus_type; dev->dev.platform_data = platform_data; - of_dma_configure(&dev->dev); + of_dma_configure(&dev->dev, dev->dev.of_node); if (of_device_add(dev) != 0) { of_dma_deconfigure(&dev->dev); @@ -299,7 +245,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node, dev_set_name(&dev->dev, "%s", bus_id); else of_device_make_bus_id(&dev->dev); - of_dma_configure(&dev->dev); + of_dma_configure(&dev->dev, dev->dev.of_node); /* Allow the HW Peripheral ID to be overridden */ prop = of_get_property(node, "arm,primecell-periphid", NULL); |