aboutsummaryrefslogtreecommitdiff
path: root/drivers/of
diff options
context:
space:
mode:
authorFrank Rowand2018-10-04 20:34:33 -0700
committerFrank Rowand2018-11-08 22:11:51 -0800
commita68238a19c3b24e43fd2327d102bcea0ccceb7d0 (patch)
treecd084e69149e0059dd1c8183009478e1e2dd4360 /drivers/of
parenta15e824ff2c18b2bb2464227009ae6aac4f07e10 (diff)
of: overlay: test case of two fragments adding same node
Multiple overlay fragments adding or deleting the same node is not supported. An attempt to do so results in an incorrect devicetree. The node name will be munged for the second add. After adding this patch, the unittest messages will show: Duplicate name in motor-1, renamed to "controller#1" OF: overlay: of_overlay_apply() err=0 ### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node ### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed ... ### dt-test ### end of unittest - 210 passed, 1 failed The incorrect (munged) node name "controller#1" can be seen in the /proc filesystem: $ pwd /proc/device-tree/testcase-data-2/substation@100/motor-1 $ ls compatible controller controller#1 name phandle spin $ ls controller power_bus $ ls controller#1 power_bus_emergency Tested-by: Alan Tull <atull@kernel.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Diffstat (limited to 'drivers/of')
-rw-r--r--drivers/of/unittest-data/Makefile1
-rw-r--r--drivers/of/unittest-data/overlay_bad_add_dup_node.dts28
-rw-r--r--drivers/of/unittest.c5
3 files changed, 34 insertions, 0 deletions
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 013d85e694c6..166dbdbfd1c5 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_12.dtb.o \
overlay_13.dtb.o \
overlay_15.dtb.o \
+ overlay_bad_add_dup_node.dtb.o \
overlay_bad_phandle.dtb.o \
overlay_bad_symbol.dtb.o \
overlay_base.dtb.o
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_node.dts b/drivers/of/unittest-data/overlay_bad_add_dup_node.dts
new file mode 100644
index 000000000000..145dfc3b1024
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_node.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/*
+ * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
+ * /testcase-data-2/substation@100/motor-1
+ *
+ * Thus the new node "controller" in each fragment will
+ * result in an attempt to add the same node twice.
+ * This will result in an error and the overlay apply
+ * will fail.
+ */
+
+&electric_1 {
+
+ motor-1 {
+ controller {
+ power_bus = < 0x1 0x2 >;
+ };
+ };
+};
+
+&spin_ctrl_1 {
+ controller {
+ power_bus_emergency = < 0x101 0x102 >;
+ };
+};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 49ae2aa744d6..f82edf829f43 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2161,6 +2161,7 @@ OVERLAY_INFO_EXTERN(overlay_11);
OVERLAY_INFO_EXTERN(overlay_12);
OVERLAY_INFO_EXTERN(overlay_13);
OVERLAY_INFO_EXTERN(overlay_15);
+OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
OVERLAY_INFO_EXTERN(overlay_bad_symbol);
@@ -2183,6 +2184,7 @@ static struct overlay_info overlays[] = {
OVERLAY_INFO(overlay_12, 0),
OVERLAY_INFO(overlay_13, 0),
OVERLAY_INFO(overlay_15, 0),
+ OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{}
@@ -2430,6 +2432,9 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_apply("overlay", NULL),
"Adding overlay 'overlay' failed\n");
+ unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
+ "Adding overlay 'overlay_bad_add_dup_node' failed\n");
+
unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n");