Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2706 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
new file mode 100644
index 000000000000..0dbcf04aa35e
--- /dev/null
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -0,0 +1,2706 @@
+/*
+ * PCI Express Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/smp_lock.h>
+#include <linux/pci.h>
+#include "../pci.h"
+#include "pciehp.h"
+#include "pciehprm.h"
+
+static u32 configure_new_device(struct controller *ctrl, struct pci_func *func,
+	u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev);
+static int configure_new_function( struct controller *ctrl, struct pci_func *func,
+	u8 behind_bridge, struct resource_lists *resources, u8 bridge_bus, u8 bridge_dev);
+static void interrupt_event_handler(struct controller *ctrl);
+
+static struct semaphore event_semaphore;	/* mutex for process loop (up if something to process) */
+static struct semaphore event_exit;		/* guard ensure thread has exited before calling it quits */
+static int event_finished;
+static unsigned long pushbutton_pending;	/* = 0 */
+static unsigned long surprise_rm_pending;	/* = 0 */
+
+u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id)
+{
+	struct controller *ctrl = (struct controller *) inst_id;
+	struct slot *p_slot;
+	u8 rc = 0;
+	u8 getstatus;
+	struct pci_func *func;
+	struct event_info *taskInfo;
+
+	/* Attention Button Change */
+	dbg("pciehp:  Attention button interrupt received.\n");
+	
+	func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+	/* This is the structure that tells the worker thread what to do */
+	taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+	
+	ctrl->next_event = (ctrl->next_event + 1) % 10;
+	taskInfo->hp_slot = hp_slot;
+
+	rc++;
+
+	/*
+	 *  Button pressed - See if need to TAKE ACTION!!!
+	 */
+	info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
+	taskInfo->event_type = INT_BUTTON_PRESS;
+
+	if ((p_slot->state == BLINKINGON_STATE)
+	    || (p_slot->state == BLINKINGOFF_STATE)) {
+		/* Cancel if we are still blinking; this means that we press the
+		 * attention again before the 5 sec. limit expires to cancel hot-add
+		 * or hot-remove
+		 */
+		taskInfo->event_type = INT_BUTTON_CANCEL;
+		info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot);
+	} else if ((p_slot->state == POWERON_STATE)
+		   || (p_slot->state == POWEROFF_STATE)) {
+		/* Ignore if the slot is on power-on or power-off state; this 
+		 * means that the previous attention button action to hot-add or
+		 * hot-remove is undergoing
+		 */
+		taskInfo->event_type = INT_BUTTON_IGNORE;
+		info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot);
+	}
+
+	if (rc)
+		up(&event_semaphore);	/* signal event thread that new event is posted */
+
+	return 0;
+
+}
+
+u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id)
+{
+	struct controller *ctrl = (struct controller *) inst_id;
+	struct slot *p_slot;
+	u8 rc = 0;
+	u8 getstatus;
+	struct pci_func *func;
+	struct event_info *taskInfo;
+
+	/* Switch Change */
+	dbg("pciehp:  Switch interrupt received.\n");
+
+	func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+	/* This is the structure that tells the worker thread
+	 * what to do
+	 */
+	taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+	ctrl->next_event = (ctrl->next_event + 1) % 10;
+	taskInfo->hp_slot = hp_slot;
+
+	rc++;
+	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+
+	if (getstatus) {
+		/*
+		 * Switch opened
+		 */
+		info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
+		func->switch_save = 0;
+		taskInfo->event_type = INT_SWITCH_OPEN;
+	} else {
+		/*
+		 *  Switch closed
+		 */
+		info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
+		func->switch_save = 0x10;
+		taskInfo->event_type = INT_SWITCH_CLOSE;
+	}
+
+	if (rc)
+		up(&event_semaphore);	/* signal event thread that new event is posted */
+
+	return rc;
+}
+
+u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id)
+{
+	struct controller *ctrl = (struct controller *) inst_id;
+	struct slot *p_slot;
+	u8 rc = 0;
+	struct pci_func *func;
+	struct event_info *taskInfo;
+
+	/* Presence Change */
+	dbg("pciehp:  Presence/Notify input change.\n");
+
+	func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+	/* This is the structure that tells the worker thread
+	 * what to do
+	 */
+	taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+	ctrl->next_event = (ctrl->next_event + 1) % 10;
+	taskInfo->hp_slot = hp_slot;
+
+	rc++;
+	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	/* Switch is open, assume a presence change
+	 * Save the presence state
+	 */
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+	if (func->presence_save) {
+		/*
+		 * Card Present
+		 */
+		info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+		taskInfo->event_type = INT_PRESENCE_ON;
+	} else {
+		/*
+		 * Not Present
+		 */
+		info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+		taskInfo->event_type = INT_PRESENCE_OFF;
+	}
+
+	if (rc)
+		up(&event_semaphore);	/* signal event thread that new event is posted */
+
+	return rc;
+}
+
+u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
+{
+	struct controller *ctrl = (struct controller *) inst_id;
+	struct slot *p_slot;
+	u8 rc = 0;
+	struct pci_func *func;
+	struct event_info *taskInfo;
+
+	/* power fault */
+	dbg("pciehp:  Power fault interrupt received.\n");
+
+	func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+	/* this is the structure that tells the worker thread
+	 * what to do
+	 */
+	taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+	ctrl->next_event = (ctrl->next_event + 1) % 10;
+	taskInfo->hp_slot = hp_slot;
+
+	rc++;
+	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
+		/*
+		 * power fault Cleared
+		 */
+		info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
+		func->status = 0x00;
+		taskInfo->event_type = INT_POWER_FAULT_CLEAR;
+	} else {
+		/*
+		 *   power fault
+		 */
+		info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
+		taskInfo->event_type = INT_POWER_FAULT;
+		/* set power fault status for this board */
+		func->status = 0xFF;
+		info("power fault bit %x set\n", hp_slot);
+	}
+	if (rc)
+		up(&event_semaphore);	/* signal event thread that new event is posted */
+
+	return rc;
+}
+
+
+/**
+ * sort_by_size: sort nodes by their length, smallest first.
+ *
+ * @head: list to sort
+ */
+static int sort_by_size(struct pci_resource **head)
+{
+	struct pci_resource *current_res;
+	struct pci_resource *next_res;
+	int out_of_order = 1;
+
+	if (!(*head))
+		return 1;
+
+	if (!((*head)->next))
+		return 0;
+
+	while (out_of_order) {
+		out_of_order = 0;
+
+		/* Special case for swapping list head */
+		if (((*head)->next) &&
+		    ((*head)->length > (*head)->next->length)) {
+			out_of_order++;
+			current_res = *head;
+			*head = (*head)->next;
+			current_res->next = (*head)->next;
+			(*head)->next = current_res;
+		}
+
+		current_res = *head;
+
+		while (current_res->next && current_res->next->next) {
+			if (current_res->next->length > current_res->next->next->length) {
+				out_of_order++;
+				next_res = current_res->next;
+				current_res->next = current_res->next->next;
+				current_res = current_res->next;
+				next_res->next = current_res->next;
+				current_res->next = next_res;
+			} else
+				current_res = current_res->next;
+		}
+	}  /* End of out_of_order loop */
+
+	return 0;
+}
+
+
+/*
+ * sort_by_max_size
+ *
+ * Sorts nodes on the list by their length.
+ * Largest first.
+ *
+ */
+static int sort_by_max_size(struct pci_resource **head)
+{
+	struct pci_resource *current_res;
+	struct pci_resource *next_res;
+	int out_of_order = 1;
+
+	if (!(*head))
+		return 1;
+
+	if (!((*head)->next))
+		return 0;
+
+	while (out_of_order) {
+		out_of_order = 0;
+
+		/* Special case for swapping list head */
+		if (((*head)->next) &&
+		    ((*head)->length < (*head)->next->length)) {
+			out_of_order++;
+			current_res = *head;
+			*head = (*head)->next;
+			current_res->next = (*head)->next;
+			(*head)->next = current_res;
+		}
+
+		current_res = *head;
+
+		while (current_res->next && current_res->next->next) {
+			if (current_res->next->length < current_res->next->next->length) {
+				out_of_order++;
+				next_res = current_res->next;
+				current_res->next = current_res->next->next;
+				current_res = current_res->next;
+				next_res->next = current_res->next;
+				current_res->next = next_res;
+			} else
+				current_res = current_res->next;
+		}
+	}  /* End of out_of_order loop */
+
+	return 0;
+}
+
+
+/**
+ * do_pre_bridge_resource_split: return one unused resource node
+ * @head: list to scan
+ *
+ */
+static struct pci_resource *
+do_pre_bridge_resource_split(struct pci_resource **head,
+				struct pci_resource **orig_head, u32 alignment)
+{
+	struct pci_resource *prevnode = NULL;
+	struct pci_resource *node;
+	struct pci_resource *split_node;
+	u32 rc;
+	u32 temp_dword;
+	dbg("do_pre_bridge_resource_split\n");
+
+	if (!(*head) || !(*orig_head))
+		return NULL;
+
+	rc = pciehp_resource_sort_and_combine(head);
+
+	if (rc)
+		return NULL;
+
+	if ((*head)->base != (*orig_head)->base)
+		return NULL;
+
+	if ((*head)->length == (*orig_head)->length)
+		return NULL;
+
+
+	/* If we got here, there the bridge requires some of the resource, but
+	 *  we may be able to split some off of the front
+	 */	
+	node = *head;
+
+	if (node->length & (alignment -1)) {
+		/* this one isn't an aligned length, so we'll make a new entry
+		 * and split it up.
+		 */
+		split_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+
+		if (!split_node)
+			return NULL;
+
+		temp_dword = (node->length | (alignment-1)) + 1 - alignment;
+
+		split_node->base = node->base;
+		split_node->length = temp_dword;
+
+		node->length -= temp_dword;
+		node->base += split_node->length;
+
+		/* Put it in the list */
+		*head = split_node;
+		split_node->next = node;
+	}
+
+	if (node->length < alignment)
+		return NULL;
+
+	/* Now unlink it */
+	if (*head == node) {
+		*head = node->next;
+	} else {
+		prevnode = *head;
+		while (prevnode->next != node)
+			prevnode = prevnode->next;
+
+		prevnode->next = node->next;
+	}
+	node->next = NULL;
+
+	return node;
+}
+
+
+/**
+ * do_bridge_resource_split: return one unused resource node
+ * @head: list to scan
+ *
+ */
+static struct pci_resource *
+do_bridge_resource_split(struct pci_resource **head, u32 alignment)
+{
+	struct pci_resource *prevnode = NULL;
+	struct pci_resource *node;
+	u32 rc;
+	u32 temp_dword;
+
+	if (!(*head))
+		return NULL;
+
+	rc = pciehp_resource_sort_and_combine(head);
+
+	if (rc)
+		return NULL;
+
+	node = *head;
+
+	while (node->next) {
+		prevnode = node;
+		node = node->next;
+		kfree(prevnode);
+	}
+
+	if (node->length < alignment) {
+		kfree(node);
+		return NULL;
+	}
+
+	if (node->base & (alignment - 1)) {
+		/* Short circuit if adjusted size is too small */
+		temp_dword = (node->base | (alignment-1)) + 1;
+		if ((node->length - (temp_dword - node->base)) < alignment) {
+			kfree(node);
+			return NULL;
+		}
+
+		node->length -= (temp_dword - node->base);
+		node->base = temp_dword;
+	}
+
+	if (node->length & (alignment - 1)) {
+		/* There's stuff in use after this node */
+		kfree(node);
+		return NULL;
+	}
+
+	return node;
+}
+
+
+/*
+ * get_io_resource
+ *
+ * this function sorts the resource list by size and then
+ * returns the first node of "size" length that is not in the
+ * ISA aliasing window.  If it finds a node larger than "size"
+ * it will split it up.
+ *
+ * size must be a power of two.
+ */
+static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size)
+{
+	struct pci_resource *prevnode;
+	struct pci_resource *node;
+	struct pci_resource *split_node = NULL;
+	u32 temp_dword;
+
+	if (!(*head))
+		return NULL;
+
+	if ( pciehp_resource_sort_and_combine(head) )
+		return NULL;
+
+	if ( sort_by_size(head) )
+		return NULL;
+
+	for (node = *head; node; node = node->next) {
+		if (node->length < size)
+			continue;
+
+		if (node->base & (size - 1)) {
+			/* this one isn't base aligned properly
+			   so we'll make a new entry and split it up */
+			temp_dword = (node->base | (size-1)) + 1;
+
+			/*/ Short circuit if adjusted size is too small */
+			if ((node->length - (temp_dword - node->base)) < size)
+				continue;
+
+			split_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+
+			if (!split_node)
+				return NULL;
+
+			split_node->base = node->base;
+			split_node->length = temp_dword - node->base;
+			node->base = temp_dword;
+			node->length -= split_node->length;
+
+			/* Put it in the list */
+			split_node->next = node->next;
+			node->next = split_node;
+		} /* End of non-aligned base */
+
+		/* Don't need to check if too small since we already did */
+		if (node->length > size) {
+			/* this one is longer than we need
+			   so we'll make a new entry and split it up */
+			split_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+
+			if (!split_node)
+				return NULL;
+
+			split_node->base = node->base + size;
+			split_node->length = node->length - size;
+			node->length = size;
+
+			/* Put it in the list */
+			split_node->next = node->next;
+			node->next = split_node;
+		}  /* End of too big on top end */
+
+		/* For IO make sure it's not in the ISA aliasing space */
+		if (node->base & 0x300L)
+			continue;
+
+		/* If we got here, then it is the right size 
+		   Now take it out of the list */
+		if (*head == node) {
+			*head = node->next;
+		} else {
+			prevnode = *head;
+			while (prevnode->next != node)
+				prevnode = prevnode->next;
+
+			prevnode->next = node->next;
+		}
+		node->next = NULL;
+		/* Stop looping */
+		break;
+	}
+
+	return node;
+}
+
+
+/*
+ * get_max_resource
+ *
+ * Gets the largest node that is at least "size" big from the
+ * list pointed to by head.  It aligns the node on top and bottom
+ * to "size" alignment before returning it.
+ * J.I. modified to put max size limits of; 64M->32M->16M->8M->4M->1M
+ *  This is needed to avoid allocating entire ACPI _CRS res to one child bridge/slot.
+ */
+static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size)
+{
+	struct pci_resource *max;
+	struct pci_resource *temp;
+	struct pci_resource *split_node;
+	u32 temp_dword;
+	u32 max_size[] = { 0x4000000, 0x2000000, 0x1000000, 0x0800000, 0x0400000, 0x0200000, 0x0100000, 0x00 };
+	int i;
+
+	if (!(*head))
+		return NULL;
+
+	if (pciehp_resource_sort_and_combine(head))
+		return NULL;
+
+	if (sort_by_max_size(head))
+		return NULL;
+
+	for (max = *head;max; max = max->next) {
+
+		/* If not big enough we could probably just bail, 
+		   instead we'll continue to the next. */
+		if (max->length < size)
+			continue;
+
+		if (max->base & (size - 1)) {
+			/* this one isn't base aligned properly
+			   so we'll make a new entry and split it up */
+			temp_dword = (max->base | (size-1)) + 1;
+
+			/* Short circuit if adjusted size is too small */
+			if ((max->length - (temp_dword - max->base)) < size)
+				continue;
+
+			split_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+
+			if (!split_node)
+				return NULL;
+
+			split_node->base = max->base;
+			split_node->length = temp_dword - max->base;
+			max->base = temp_dword;
+			max->length -= split_node->length;
+
+			/* Put it next in the list */
+			split_node->next = max->next;
+			max->next = split_node;
+		}
+
+		if ((max->base + max->length) & (size - 1)) {
+			/* this one isn't end aligned properly at the top
+			   so we'll make a new entry and split it up */
+			split_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+
+			if (!split_node)
+				return NULL;
+			temp_dword = ((max->base + max->length) & ~(size - 1));
+			split_node->base = temp_dword;
+			split_node->length = max->length + max->base
+					     - split_node->base;
+			max->length -= split_node->length;
+
+			/* Put it in the list */
+			split_node->next = max->next;
+			max->next = split_node;
+		}
+
+		/* Make sure it didn't shrink too much when we aligned it */
+		if (max->length < size)
+			continue;
+
+		for ( i = 0; max_size[i] > size; i++) {
+			if (max->length > max_size[i]) {
+				split_node = kmalloc(sizeof(struct pci_resource),
+							GFP_KERNEL);
+				if (!split_node)
+					break;	/* return NULL; */
+				split_node->base = max->base + max_size[i];
+				split_node->length = max->length - max_size[i];
+				max->length = max_size[i];
+				/* Put it next in the list */
+				split_node->next = max->next;
+				max->next = split_node;
+				break;
+			}
+		}
+
+		/* Now take it out of the list */
+		temp = (struct pci_resource*) *head;
+		if (temp == max) {
+			*head = max->next;
+		} else {
+			while (temp && temp->next != max) {
+				temp = temp->next;
+			}
+
+			temp->next = max->next;
+		}
+
+		max->next = NULL;
+		return max;
+	}
+
+	/* If we get here, we couldn't find one */
+	return NULL;
+}
+
+
+/*
+ * get_resource
+ *
+ * this function sorts the resource list by size and then
+ * returns the first node of "size" length.  If it finds a node
+ * larger than "size" it will split it up.
+ *
+ * size must be a power of two.
+ */
+static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
+{
+	struct pci_resource *prevnode;
+	struct pci_resource *node;
+	struct pci_resource *split_node;
+	u32 temp_dword;
+
+	if (!(*head))
+		return NULL;
+
+	if ( pciehp_resource_sort_and_combine(head) )
+		return NULL;
+
+	if ( sort_by_size(head) )
+		return NULL;
+
+	for (node = *head; node; node = node->next) {
+		dbg("%s: req_size =0x%x node=%p, base=0x%x, length=0x%x\n",
+		    __FUNCTION__, size, node, node->base, node->length);
+		if (node->length < size)
+			continue;
+
+		if (node->base & (size - 1)) {
+			dbg("%s: not aligned\n", __FUNCTION__);
+			/* this one isn't base aligned properly
+			   so we'll make a new entry and split it up */
+			temp_dword = (node->base | (size-1)) + 1;
+
+			/* Short circuit if adjusted size is too small */
+			if ((node->length - (temp_dword - node->base)) < size)
+				continue;
+
+			split_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+
+			if (!split_node)
+				return NULL;
+
+			split_node->base = node->base;
+			split_node->length = temp_dword - node->base;
+			node->base = temp_dword;
+			node->length -= split_node->length;
+
+			/* Put it in the list */
+			split_node->next = node->next;
+			node->next = split_node;
+		} /* End of non-aligned base */
+
+		/* Don't need to check if too small since we already did */
+		if (node->length > size) {
+			dbg("%s: too big\n", __FUNCTION__);
+			/* this one is longer than we need
+			   so we'll make a new entry and split it up */
+			split_node = kmalloc(sizeof(struct pci_resource),
+						GFP_KERNEL);
+
+			if (!split_node)
+				return NULL;
+
+			split_node->base = node->base + size;
+			split_node->length = node->length - size;
+			node->length = size;
+
+			/* Put it in the list */
+			split_node->next = node->next;
+			node->next = split_node;
+		}  /* End of too big on top end */
+
+		dbg("%s: got one!!!\n", __FUNCTION__);
+		/* If we got here, then it is the right size
+		   Now take it out of the list */
+		if (*head == node) {
+			*head = node->next;
+		} else {
+			prevnode = *head;
+			while (prevnode->next != node)
+				prevnode = prevnode->next;
+
+			prevnode->next = node->next;
+		}
+		node->next = NULL;
+		/* Stop looping */
+		break;
+	}
+	return node;
+}
+
+
+/*
+ * pciehp_resource_sort_and_combine
+ *
+ * Sorts all of the nodes in the list in ascending order by
+ * their base addresses.  Also does garbage collection by
+ * combining adjacent nodes.
+ *
+ * returns 0 if success
+ */
+int pciehp_resource_sort_and_combine(struct pci_resource **head)
+{
+	struct pci_resource *node1;
+	struct pci_resource *node2;
+	int out_of_order = 1;
+
+	dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);
+
+	if (!(*head))
+		return 1;
+
+	dbg("*head->next = %p\n",(*head)->next);
+
+	if (!(*head)->next)
+		return 0;	/* only one item on the list, already sorted! */
+
+	dbg("*head->base = 0x%x\n",(*head)->base);
+	dbg("*head->next->base = 0x%x\n",(*head)->next->base);
+	while (out_of_order) {
+		out_of_order = 0;
+
+		/* Special case for swapping list head */
+		if (((*head)->next) &&
+		    ((*head)->base > (*head)->next->base)) {
+			node1 = *head;
+			(*head) = (*head)->next;
+			node1->next = (*head)->next;
+			(*head)->next = node1;
+			out_of_order++;
+		}
+
+		node1 = (*head);
+
+		while (node1->next && node1->next->next) {
+			if (node1->next->base > node1->next->next->base) {
+				out_of_order++;
+				node2 = node1->next;
+				node1->next = node1->next->next;
+				node1 = node1->next;
+				node2->next = node1->next;
+				node1->next = node2;
+			} else
+				node1 = node1->next;
+		}
+	}  /* End of out_of_order loop */
+
+	node1 = *head;
+
+	while (node1 && node1->next) {
+		if ((node1->base + node1->length) == node1->next->base) {
+			/* Combine */
+			dbg("8..\n");
+			node1->length += node1->next->length;
+			node2 = node1->next;
+			node1->next = node1->next->next;
+			kfree(node2);
+		} else
+			node1 = node1->next;
+	}
+
+	return 0;
+}
+
+
+/**
+ * pciehp_slot_create - Creates a node and adds it to the proper bus.
+ * @busnumber - bus where new node is to be located
+ *
+ * Returns pointer to the new node or NULL if unsuccessful
+ */
+struct pci_func *pciehp_slot_create(u8 busnumber)
+{
+	struct pci_func *new_slot;
+	struct pci_func *next;
+	dbg("%s: busnumber %x\n", __FUNCTION__, busnumber);
+	new_slot = kmalloc(sizeof(struct pci_func), GFP_KERNEL);
+
+	if (new_slot == NULL)
+		return new_slot;
+
+	memset(new_slot, 0, sizeof(struct pci_func));
+
+	new_slot->next = NULL;
+	new_slot->configured = 1;
+
+	if (pciehp_slot_list[busnumber] == NULL) {
+		pciehp_slot_list[busnumber] = new_slot;
+	} else {
+		next = pciehp_slot_list[busnumber];
+		while (next->next != NULL)
+			next = next->next;
+		next->next = new_slot;
+	}
+	return new_slot;
+}
+
+
+/**
+ * slot_remove - Removes a node from the linked list of slots.
+ * @old_slot: slot to remove
+ *
+ * Returns 0 if successful, !0 otherwise.
+ */
+static int slot_remove(struct pci_func * old_slot)
+{
+	struct pci_func *next;
+
+	if (old_slot == NULL)
+		return 1;
+
+	next = pciehp_slot_list[old_slot->bus];
+
+	if (next == NULL)
+		return 1;
+
+	if (next == old_slot) {
+		pciehp_slot_list[old_slot->bus] = old_slot->next;
+		pciehp_destroy_board_resources(old_slot);
+		kfree(old_slot);
+		return 0;
+	}
+
+	while ((next->next != old_slot) && (next->next != NULL)) {
+		next = next->next;
+	}
+
+	if (next->next == old_slot) {
+		next->next = old_slot->next;
+		pciehp_destroy_board_resources(old_slot);
+		kfree(old_slot);
+		return 0;
+	} else
+		return 2;
+}
+
+
+/**
+ * bridge_slot_remove - Removes a node from the linked list of slots.
+ * @bridge: bridge to remove
+ *
+ * Returns 0 if successful, !0 otherwise.
+ */
+static int bridge_slot_remove(struct pci_func *bridge)
+{
+	u8 subordinateBus, secondaryBus;
+	u8 tempBus;
+	struct pci_func *next;
+
+	if (bridge == NULL)
+		return 1;
+
+	secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
+	subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
+
+	for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
+		next = pciehp_slot_list[tempBus];
+
+		while (!slot_remove(next)) {
+			next = pciehp_slot_list[tempBus];
+		}
+	}
+
+	next = pciehp_slot_list[bridge->bus];
+
+	if (next == NULL) {
+		return 1;
+	}
+
+	if (next == bridge) {
+		pciehp_slot_list[bridge->bus] = bridge->next;
+		kfree(bridge);
+		return 0;
+	}
+
+	while ((next->next != bridge) && (next->next != NULL)) {
+		next = next->next;
+	}
+
+	if (next->next == bridge) {
+		next->next = bridge->next;
+		kfree(bridge);
+		return 0;
+	} else
+		return 2;
+}
+
+
+/**
+ * pciehp_slot_find - Looks for a node by bus, and device, multiple functions accessed
+ * @bus: bus to find
+ * @device: device to find
+ * @index: is 0 for first function found, 1 for the second...
+ *
+ * Returns pointer to the node if successful, %NULL otherwise.
+ */
+struct pci_func *pciehp_slot_find(u8 bus, u8 device, u8 index)
+{
+	int found = -1;
+	struct pci_func *func;
+
+	func = pciehp_slot_list[bus];
+	dbg("%s: bus %x device %x index %x\n",
+		__FUNCTION__, bus, device, index);
+	if (func != NULL) {
+		dbg("%s: func-> bus %x device %x function %x pci_dev %p\n",
+			__FUNCTION__, func->bus, func->device, func->function,
+			func->pci_dev);
+	} else
+		dbg("%s: func == NULL\n", __FUNCTION__);
+
+	if ((func == NULL) || ((func->device == device) && (index == 0)))
+		return func;
+
+	if (func->device == device)
+		found++;
+
+	while (func->next != NULL) {
+		func = func->next;
+
+		dbg("%s: In while loop, func-> bus %x device %x function %x pci_dev %p\n",
+			__FUNCTION__, func->bus, func->device, func->function,
+			func->pci_dev);
+		if (func->device == device)
+			found++;
+		dbg("%s: while loop, found %d, index %d\n", __FUNCTION__,
+			found, index);
+
+		if ((found == index) || (func->function == index)) {
+			dbg("%s: Found bus %x dev %x func %x\n", __FUNCTION__,
+					func->bus, func->device, func->function);
+			return func;
+		}
+	}
+
+	return NULL;
+}
+
+static int is_bridge(struct pci_func * func)
+{
+	/* Check the header type */
+	if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
+		return 1;
+	else
+		return 0;
+}
+
+
+/* The following routines constitute the bulk of the 
+   hotplug controller logic
+ */
+
+static void set_slot_off(struct controller *ctrl, struct slot * pslot)
+{
+	/* Wait for exclusive access to hardware */
+	down(&ctrl->crit_sect);
+
+	/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
+	if (POWER_CTRL(ctrl->ctrlcap)) {
+		if (pslot->hpc_ops->power_off_slot(pslot)) {   
+			err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__);
+			up(&ctrl->crit_sect);
+			return;
+		}
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	if (PWR_LED(ctrl->ctrlcap)) {
+		pslot->hpc_ops->green_led_off(pslot);   
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	if (ATTN_LED(ctrl->ctrlcap)) { 
+		if (pslot->hpc_ops->set_attention_status(pslot, 1)) {   
+			err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__);
+			up(&ctrl->crit_sect);
+			return;
+		}
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	/* Done with exclusive hardware access */
+	up(&ctrl->crit_sect);
+}
+
+/**
+ * board_added - Called after a board has been added to the system.
+ *
+ * Turns power on for the board
+ * Configures board
+ *
+ */
+static u32 board_added(struct pci_func * func, struct controller * ctrl)
+{
+	u8 hp_slot;
+	int index;
+	u32 temp_register = 0xFFFFFFFF;
+	u32 rc = 0;
+	struct pci_func *new_func = NULL;
+	struct slot *p_slot;
+	struct resource_lists res_lists;
+
+	p_slot = pciehp_find_slot(ctrl, func->device);
+	hp_slot = func->device - ctrl->slot_device_offset;
+
+	dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
+
+	/* Wait for exclusive access to hardware */
+	down(&ctrl->crit_sect);
+
+	if (POWER_CTRL(ctrl->ctrlcap)) {
+		/* Power on slot */
+		rc = p_slot->hpc_ops->power_on_slot(p_slot);
+		if (rc) {
+			up(&ctrl->crit_sect);
+			return -1;
+		}
+
+		/* Wait for the command to complete */
+		wait_for_ctrl_irq (ctrl);
+	}
+	
+	if (PWR_LED(ctrl->ctrlcap)) {
+		p_slot->hpc_ops->green_led_blink(p_slot);
+			
+		/* Wait for the command to complete */
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	/* Done with exclusive hardware access */
+	up(&ctrl->crit_sect);
+
+	/* Wait for ~1 second */
+	dbg("%s: before long_delay\n", __FUNCTION__);
+	wait_for_ctrl_irq (ctrl);
+	dbg("%s: afterlong_delay\n", __FUNCTION__);
+
+	/*  Check link training status */
+	rc = p_slot->hpc_ops->check_lnk_status(ctrl);  
+	if (rc) {
+		err("%s: Failed to check link status\n", __FUNCTION__);
+		set_slot_off(ctrl, p_slot);
+		return rc;
+	}
+
+	dbg("%s: func status = %x\n", __FUNCTION__, func->status);
+
+	/* Check for a power fault */
+	if (func->status == 0xFF) {
+		/* power fault occurred, but it was benign */
+		temp_register = 0xFFFFFFFF;
+		dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
+		rc = POWER_FAILURE;
+		func->status = 0;
+	} else {
+		/* Get vendor/device ID u32 */
+		rc = pci_bus_read_config_dword (ctrl->pci_dev->subordinate, PCI_DEVFN(func->device, func->function), 
+			PCI_VENDOR_ID, &temp_register);
+		dbg("%s: pci_bus_read_config_dword returns %d\n", __FUNCTION__, rc);
+		dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);
+
+		if (rc != 0) {
+			/* Something's wrong here */
+			temp_register = 0xFFFFFFFF;
+			dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
+		}
+		/* Preset return code.  It will be changed later if things go okay. */
+		rc = NO_ADAPTER_PRESENT;
+	}
+
+	/* All F's is an empty slot or an invalid board */
+	if (temp_register != 0xFFFFFFFF) {	  /* Check for a board in the slot */
+		res_lists.io_head = ctrl->io_head;
+		res_lists.mem_head = ctrl->mem_head;
+		res_lists.p_mem_head = ctrl->p_mem_head;
+		res_lists.bus_head = ctrl->bus_head;
+		res_lists.irqs = NULL;
+
+		rc = configure_new_device(ctrl, func, 0, &res_lists, 0, 0);
+		dbg("%s: back from configure_new_device\n", __FUNCTION__);
+
+		ctrl->io_head = res_lists.io_head;
+		ctrl->mem_head = res_lists.mem_head;
+		ctrl->p_mem_head = res_lists.p_mem_head;
+		ctrl->bus_head = res_lists.bus_head;
+
+		pciehp_resource_sort_and_combine(&(ctrl->mem_head));
+		pciehp_resource_sort_and_combine(&(ctrl->p_mem_head));
+		pciehp_resource_sort_and_combine(&(ctrl->io_head));
+		pciehp_resource_sort_and_combine(&(ctrl->bus_head));
+
+		if (rc) {
+			set_slot_off(ctrl, p_slot);
+			return rc;
+		}
+		pciehp_save_slot_config(ctrl, func);
+
+		func->status = 0;
+		func->switch_save = 0x10;
+		func->is_a_board = 0x01;
+
+		/* next, we will instantiate the linux pci_dev structures 
+		 * (with appropriate driver notification, if already present) 
+		 */
+		index = 0;
+		do {
+			new_func = pciehp_slot_find(ctrl->slot_bus, func->device, index++);
+			if (new_func && !new_func->pci_dev) {
+				dbg("%s:call pci_hp_configure_dev, func %x\n", 
+					__FUNCTION__, index);
+				pciehp_configure_device(ctrl, new_func);
+			}
+		} while (new_func);
+
+ 		/* 
+ 		 * Some PCI Express root ports require fixup after hot-plug operation.
+ 		 */
+ 		if (pcie_mch_quirk)
+ 			pci_fixup_device(pci_fixup_final, ctrl->pci_dev);
+ 
+  		if (PWR_LED(ctrl->ctrlcap)) {
+  			/* Wait for exclusive access to hardware */
+  			down(&ctrl->crit_sect);
+   
+  			p_slot->hpc_ops->green_led_on(p_slot);
+  
+  			/* Wait for the command to complete */
+  			wait_for_ctrl_irq (ctrl);
+  	
+  			/* Done with exclusive hardware access */
+  			up(&ctrl->crit_sect);
+  		}
+	} else {
+		set_slot_off(ctrl, p_slot);
+		return -1;
+	}
+	return 0;
+}
+
+
+/**
+ * remove_board - Turns off slot and LED's
+ *
+ */
+static u32 remove_board(struct pci_func *func, struct controller *ctrl)
+{
+	int index;
+	u8 skip = 0;
+	u8 device;
+	u8 hp_slot;
+	u32 rc;
+	struct resource_lists res_lists;
+	struct pci_func *temp_func;
+	struct slot *p_slot;
+
+	if (func == NULL)
+		return 1;
+
+	if (pciehp_unconfigure_device(func))
+		return 1;
+
+	device = func->device;
+
+	hp_slot = func->device - ctrl->slot_device_offset;
+	p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
+
+	if ((ctrl->add_support) &&
+		!(func->bus_head || func->mem_head || func->p_mem_head || func->io_head)) {
+		/* Here we check to see if we've saved any of the board's
+		 * resources already.  If so, we'll skip the attempt to
+		 * determine what's being used.
+		 */
+		index = 0;
+
+		temp_func = func;
+
+		while ((temp_func = pciehp_slot_find(temp_func->bus, temp_func->device, index++))) {
+			if (temp_func->bus_head || temp_func->mem_head
+			    || temp_func->p_mem_head || temp_func->io_head) {
+				skip = 1;
+				break;
+			}
+		}
+
+		if (!skip)
+			rc = pciehp_save_used_resources(ctrl, func, DISABLE_CARD);
+	}
+	/* Change status to shutdown */
+	if (func->is_a_board)
+		func->status = 0x01;
+	func->configured = 0;
+
+	/* Wait for exclusive access to hardware */
+	down(&ctrl->crit_sect);
+
+	if (POWER_CTRL(ctrl->ctrlcap)) {
+		/* power off slot */
+		rc = p_slot->hpc_ops->power_off_slot(p_slot);
+		if (rc) {
+			err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
+			up(&ctrl->crit_sect);
+			return rc;
+		}
+		/* Wait for the command to complete */
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	if (PWR_LED(ctrl->ctrlcap)) {
+		/* turn off Green LED */
+		p_slot->hpc_ops->green_led_off(p_slot);
+	
+		/* Wait for the command to complete */
+		wait_for_ctrl_irq (ctrl);
+	}
+
+	/* Done with exclusive hardware access */
+	up(&ctrl->crit_sect);
+
+	if (ctrl->add_support) {
+		while (func) {
+			res_lists.io_head = ctrl->io_head;
+			res_lists.mem_head = ctrl->mem_head;
+			res_lists.p_mem_head = ctrl->p_mem_head;
+			res_lists.bus_head = ctrl->bus_head;
+
+			dbg("Returning resources to ctlr lists for (B/D/F) = (%#x/%#x/%#x)\n", 
+				func->bus, func->device, func->function);
+
+			pciehp_return_board_resources(func, &res_lists);
+
+			ctrl->io_head = res_lists.io_head;
+			ctrl->mem_head = res_lists.mem_head;
+			ctrl->p_mem_head = res_lists.p_mem_head;
+			ctrl->bus_head = res_lists.bus_head;
+
+			pciehp_resource_sort_and_combine(&(ctrl->mem_head));
+			pciehp_resource_sort_and_combine(&(ctrl->p_mem_head));
+			pciehp_resource_sort_and_combine(&(ctrl->io_head));
+			pciehp_resource_sort_and_combine(&(ctrl->bus_head));
+
+			if (is_bridge(func)) {
+				dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", 
+					ctrl->seg, func->bus, func->device, func->function);
+				bridge_slot_remove(func);
+			} else {
+				dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", 
+					ctrl->seg, func->bus, func->device, func->function);
+				slot_remove(func);
+			}
+
+			func = pciehp_slot_find(ctrl->slot_bus, device, 0);
+		}
+
+		/* Setup slot structure with entry for empty slot */
+		func = pciehp_slot_create(ctrl->slot_bus);
+
+		if (func == NULL) {
+			return 1;
+		}
+
+		func->bus = ctrl->slot_bus;
+		func->device = device;
+		func->function = 0;
+		func->configured = 0;
+		func->switch_save = 0x10;
+		func->is_a_board = 0;
+	}
+
+	return 0;
+}
+
+
+static void pushbutton_helper_thread(unsigned long data)
+{
+	pushbutton_pending = data;
+
+	up(&event_semaphore);
+}
+
+/**
+ * pciehp_pushbutton_thread
+ *
+ * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Handles all pending events and exits.
+ *
+ */
+static void pciehp_pushbutton_thread(unsigned long slot)
+{
+	struct slot *p_slot = (struct slot *) slot;
+	u8 getstatus;
+	
+	pushbutton_pending = 0;
+
+	if (!p_slot) {
+		dbg("%s: Error! slot NULL\n", __FUNCTION__);
+		return;
+	}
+
+	p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+	if (getstatus) {
+		p_slot->state = POWEROFF_STATE;
+		dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
+
+		pciehp_disable_slot(p_slot);
+		p_slot->state = STATIC_STATE;
+	} else {
+		p_slot->state = POWERON_STATE;
+		dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
+
+		if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) {
+			/* Wait for exclusive access to hardware */
+			down(&p_slot->ctrl->crit_sect);
+
+			p_slot->hpc_ops->green_led_off(p_slot);
+
+			/* Wait for the command to complete */
+			wait_for_ctrl_irq (p_slot->ctrl);
+
+			/* Done with exclusive hardware access */
+			up(&p_slot->ctrl->crit_sect);
+		}
+		p_slot->state = STATIC_STATE;
+	}
+
+	return;
+}
+
+/**
+ * pciehp_surprise_rm_thread
+ *
+ * Scheduled procedure to handle blocking stuff for the surprise removal
+ * Handles all pending events and exits.
+ *
+ */
+static void pciehp_surprise_rm_thread(unsigned long slot)
+{
+	struct slot *p_slot = (struct slot *) slot;
+	u8 getstatus;
+	
+	surprise_rm_pending = 0;
+
+	if (!p_slot) {
+		dbg("%s: Error! slot NULL\n", __FUNCTION__);
+		return;
+	}
+
+	p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+	if (!getstatus) {
+		p_slot->state = POWEROFF_STATE;
+		dbg("In removing board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
+
+		pciehp_disable_slot(p_slot);
+		p_slot->state = STATIC_STATE;
+	} else {
+		p_slot->state = POWERON_STATE;
+		dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
+
+		if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) {
+			/* Wait for exclusive access to hardware */
+			down(&p_slot->ctrl->crit_sect);
+
+			p_slot->hpc_ops->green_led_off(p_slot);
+
+			/* Wait for the command to complete */
+			wait_for_ctrl_irq (p_slot->ctrl);
+
+			/* Done with exclusive hardware access */
+			up(&p_slot->ctrl->crit_sect);
+		}
+		p_slot->state = STATIC_STATE;
+	}
+
+	return;
+}
+
+
+
+/* this is the main worker thread */
+static int event_thread(void* data)
+{
+	struct controller *ctrl;
+	lock_kernel();
+	daemonize("pciehpd_event");
+
+	unlock_kernel();
+
+	while (1) {
+		dbg("!!!!event_thread sleeping\n");
+		down_interruptible (&event_semaphore);
+		dbg("event_thread woken finished = %d\n", event_finished);
+		if (event_finished || signal_pending(current))
+			break;
+		/* Do stuff here */
+		if (pushbutton_pending)
+			pciehp_pushbutton_thread(pushbutton_pending);
+		else if (surprise_rm_pending)
+			pciehp_surprise_rm_thread(surprise_rm_pending);
+		else
+			for (ctrl = pciehp_ctrl_list; ctrl; ctrl=ctrl->next)
+				interrupt_event_handler(ctrl);
+	}
+	dbg("event_thread signals exit\n");
+	up(&event_exit);
+	return 0;
+}
+
+int pciehp_event_start_thread(void)
+{
+	int pid;
+
+	/* initialize our semaphores */
+	init_MUTEX_LOCKED(&event_exit);
+	event_finished=0;
+
+	init_MUTEX_LOCKED(&event_semaphore);
+	pid = kernel_thread(event_thread, NULL, 0);
+
+	if (pid < 0) {
+		err ("Can't start up our event thread\n");
+		return -1;
+	}
+	dbg("Our event thread pid = %d\n", pid);
+	return 0;
+}
+
+
+void pciehp_event_stop_thread(void)
+{
+	event_finished = 1;
+	dbg("event_thread finish command given\n");
+	up(&event_semaphore);
+	dbg("wait for event_thread to exit\n");
+	down(&event_exit);
+}
+
+
+static int update_slot_info(struct slot *slot)
+{
+	struct hotplug_slot_info *info;
+	/* char buffer[SLOT_NAME_SIZE]; */
+	int result;
+
+	info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	/* make_slot_name (&buffer[0], SLOT_NAME_SIZE, slot); */
+
+	slot->hpc_ops->get_power_status(slot, &(info->power_status));
+	slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
+	slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
+	slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
+
+	/* result = pci_hp_change_slot_info(buffer, info); */
+	result = pci_hp_change_slot_info(slot->hotplug_slot, info);
+	kfree (info);
+	return result;
+}
+
+static void interrupt_event_handler(struct controller *ctrl)
+{
+	int loop = 0;
+	int change = 1;
+	struct pci_func *func;
+	u8 hp_slot;
+	u8 getstatus;
+	struct slot *p_slot;
+
+	while (change) {
+		change = 0;
+
+		for (loop = 0; loop < 10; loop++) {
+			if (ctrl->event_queue[loop].event_type != 0) {
+				hp_slot = ctrl->event_queue[loop].hp_slot;
+
+				func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
+
+				p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+				dbg("hp_slot %d, func %p, p_slot %p\n", hp_slot, func, p_slot);
+
+				if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
+					dbg("button cancel\n");
+					del_timer(&p_slot->task_event);
+
+					switch (p_slot->state) {
+					case BLINKINGOFF_STATE:
+						/* Wait for exclusive access to hardware */
+						down(&ctrl->crit_sect);
+						
+						if (PWR_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->green_led_on(p_slot);
+							/* Wait for the command to complete */
+							wait_for_ctrl_irq (ctrl);
+						}
+						if (ATTN_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->set_attention_status(p_slot, 0);
+
+							/* Wait for the command to complete */
+							wait_for_ctrl_irq (ctrl);
+						}
+						/* Done with exclusive hardware access */
+						up(&ctrl->crit_sect);
+						break;
+					case BLINKINGON_STATE:
+						/* Wait for exclusive access to hardware */
+						down(&ctrl->crit_sect);
+
+						if (PWR_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->green_led_off(p_slot);
+							/* Wait for the command to complete */
+							wait_for_ctrl_irq (ctrl);
+						}
+						if (ATTN_LED(ctrl->ctrlcap)){
+							p_slot->hpc_ops->set_attention_status(p_slot, 0);
+							/* Wait for the command to complete */
+							wait_for_ctrl_irq (ctrl);
+						}
+						/* Done with exclusive hardware access */
+						up(&ctrl->crit_sect);
+
+						break;
+					default:
+						warn("Not a valid state\n");
+						return;
+					}
+					info(msg_button_cancel, p_slot->number);
+					p_slot->state = STATIC_STATE;
+				}
+				/* ***********Button Pressed (No action on 1st press...) */
+				else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
+					
+					if (ATTN_BUTTN(ctrl->ctrlcap)) {
+						dbg("Button pressed\n");
+						p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+						if (getstatus) {
+							/* slot is on */
+							dbg("slot is on\n");
+							p_slot->state = BLINKINGOFF_STATE;
+							info(msg_button_off, p_slot->number);
+						} else {
+							/* slot is off */
+							dbg("slot is off\n");
+							p_slot->state = BLINKINGON_STATE;
+							info(msg_button_on, p_slot->number);
+						}
+
+						/* Wait for exclusive access to hardware */
+						down(&ctrl->crit_sect);
+
+						/* blink green LED and turn off amber */
+						if (PWR_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->green_led_blink(p_slot);
+							/* Wait for the command to complete */
+							wait_for_ctrl_irq (ctrl);
+						}
+
+						if (ATTN_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->set_attention_status(p_slot, 0);
+
+							/* Wait for the command to complete */
+							wait_for_ctrl_irq (ctrl);
+						}
+
+						/* Done with exclusive hardware access */
+						up(&ctrl->crit_sect);
+
+						init_timer(&p_slot->task_event);
+						p_slot->task_event.expires = jiffies + 5 * HZ;   /* 5 second delay */
+						p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
+						p_slot->task_event.data = (unsigned long) p_slot;
+
+						dbg("add_timer p_slot = %p\n", (void *) p_slot);
+						add_timer(&p_slot->task_event);
+					}
+				}
+				/***********POWER FAULT********************/
+				else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
+					if (POWER_CTRL(ctrl->ctrlcap)) {
+						dbg("power fault\n");
+						/* Wait for exclusive access to hardware */
+						down(&ctrl->crit_sect);
+
+						if (ATTN_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->set_attention_status(p_slot, 1);
+							wait_for_ctrl_irq (ctrl);
+						}
+
+						if (PWR_LED(ctrl->ctrlcap)) {
+							p_slot->hpc_ops->green_led_off(p_slot);
+							wait_for_ctrl_irq (ctrl);
+						}
+
+						/* Done with exclusive hardware access */
+						up(&ctrl->crit_sect);
+					}
+				}
+				/***********SURPRISE REMOVAL********************/
+				else if ((ctrl->event_queue[loop].event_type == INT_PRESENCE_ON) || 
+					(ctrl->event_queue[loop].event_type == INT_PRESENCE_OFF)) {
+					if (HP_SUPR_RM(ctrl->ctrlcap)) {
+						dbg("Surprise Removal\n");
+						if (p_slot) {
+							surprise_rm_pending = (unsigned long) p_slot;
+							up(&event_semaphore);
+							update_slot_info(p_slot);
+						}
+					}
+				} else {
+					/* refresh notification */
+					if (p_slot)
+						update_slot_info(p_slot);
+				}
+
+				ctrl->event_queue[loop].event_type = 0;
+
+				change = 1;
+			}
+		}		/* End of FOR loop */
+	}
+}
+
+
+int pciehp_enable_slot(struct slot *p_slot)
+{
+	u8 getstatus = 0;
+	int rc;
+	struct pci_func *func;
+
+	func = pciehp_slot_find(p_slot->bus, p_slot->device, 0);
+	if (!func) {
+		dbg("%s: Error! slot NULL\n", __FUNCTION__);
+		return 1;
+	}
+
+	/* Check to see if (latch closed, card present, power off) */
+	down(&p_slot->ctrl->crit_sect);
+
+	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+	if (rc || !getstatus) {
+		info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+		up(&p_slot->ctrl->crit_sect);
+		return 1;
+	}
+	if (MRL_SENS(p_slot->ctrl->ctrlcap)) {	
+		rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+		if (rc || getstatus) {
+			info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+			up(&p_slot->ctrl->crit_sect);
+			return 1;
+		}
+	}
+	
+	if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {	
+		rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+		if (rc || getstatus) {
+			info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
+			up(&p_slot->ctrl->crit_sect);
+			return 1;
+		}
+	}
+	up(&p_slot->ctrl->crit_sect);
+
+	slot_remove(func);
+
+	func = pciehp_slot_create(p_slot->bus);
+	if (func == NULL)
+		return 1;
+
+	func->bus = p_slot->bus;
+	func->device = p_slot->device;
+	func->function = 0;
+	func->configured = 0;
+	func->is_a_board = 1;
+
+	/* We have to save the presence info for these slots */
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+	func->switch_save = !getstatus? 0x10:0;
+
+	rc = board_added(func, p_slot->ctrl);
+	if (rc) {
+		if (is_bridge(func))
+			bridge_slot_remove(func);
+		else
+			slot_remove(func);
+
+		/* Setup slot structure with entry for empty slot */
+		func = pciehp_slot_create(p_slot->bus);
+		if (func == NULL)
+			return 1;	/* Out of memory */
+
+		func->bus = p_slot->bus;
+		func->device = p_slot->device;
+		func->function = 0;
+		func->configured = 0;
+		func->is_a_board = 1;
+
+		/* We have to save the presence info for these slots */
+		p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
+		p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+		func->switch_save = !getstatus? 0x10:0;
+	}
+
+	if (p_slot)
+		update_slot_info(p_slot);
+
+	return rc;
+}
+
+
+int pciehp_disable_slot(struct slot *p_slot)
+{
+	u8 class_code, header_type, BCR;
+	u8 index = 0;
+	u8 getstatus = 0;
+	u32 rc = 0;
+	int ret = 0;
+	unsigned int devfn;
+	struct pci_bus *pci_bus = p_slot->ctrl->pci_dev->subordinate;
+	struct pci_func *func;
+
+	if (!p_slot->ctrl)
+		return 1;
+
+	/* Check to see if (latch closed, card present, power on) */
+	down(&p_slot->ctrl->crit_sect);
+
+	if (!HP_SUPR_RM(p_slot->ctrl->ctrlcap)) {	
+		ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+		if (ret || !getstatus) {
+			info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+			up(&p_slot->ctrl->crit_sect);
+			return 1;
+		}
+	}
+
+	if (MRL_SENS(p_slot->ctrl->ctrlcap)) {	
+		ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+		if (ret || getstatus) {
+			info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+			up(&p_slot->ctrl->crit_sect);
+			return 1;
+		}
+	}
+
+	if (POWER_CTRL(p_slot->ctrl->ctrlcap)) {	
+		ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+		if (ret || !getstatus) {
+			info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
+			up(&p_slot->ctrl->crit_sect);
+			return 1;
+		}
+	}
+
+	up(&p_slot->ctrl->crit_sect);
+
+	func = pciehp_slot_find(p_slot->bus, p_slot->device, index++);
+
+	/* Make sure there are no video controllers here
+	 * for all func of p_slot
+	 */
+	while (func && !rc) {
+		pci_bus->number = func->bus;
+		devfn = PCI_DEVFN(func->device, func->function);
+
+		/* Check the Class Code */
+		rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+		if (rc)
+			return rc;
+
+		if (class_code == PCI_BASE_CLASS_DISPLAY) {
+			/* Display/Video adapter (not supported) */
+			rc = REMOVE_NOT_SUPPORTED;
+		} else {
+			/* See if it's a bridge */
+			rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+			if (rc)
+				return rc;
+
+			/* If it's a bridge, check the VGA Enable bit */
+			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+				rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
+				if (rc)
+					return rc;
+
+				/* If the VGA Enable bit is set, remove isn't supported */
+				if (BCR & PCI_BRIDGE_CTL_VGA) {
+					rc = REMOVE_NOT_SUPPORTED;
+				}
+			}
+		}
+
+		func = pciehp_slot_find(p_slot->bus, p_slot->device, index++);
+	}
+
+	func = pciehp_slot_find(p_slot->bus, p_slot->device, 0);
+	if ((func != NULL) && !rc) {
+		rc = remove_board(func, p_slot->ctrl);
+	} else if (!rc)
+		rc = 1;
+
+	if (p_slot)
+		update_slot_info(p_slot);
+
+	return rc;
+}
+
+
+/**
+ * configure_new_device - Configures the PCI header information of one board.
+ *
+ * @ctrl: pointer to controller structure
+ * @func: pointer to function structure
+ * @behind_bridge: 1 if this is a recursive call, 0 if not
+ * @resources: pointer to set of resource lists
+ *
+ * Returns 0 if success
+ *
+ */
+static u32 configure_new_device(struct controller * ctrl, struct pci_func * func,
+	u8 behind_bridge, struct resource_lists * resources, u8 bridge_bus, u8 bridge_dev)
+{
+	u8 temp_byte, function, max_functions, stop_it;
+	int rc;
+	u32 ID;
+	struct pci_func *new_slot;
+	struct pci_bus lpci_bus, *pci_bus;
+	int index;
+
+	new_slot = func;
+
+	dbg("%s\n", __FUNCTION__);
+	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+	pci_bus = &lpci_bus;
+	pci_bus->number = func->bus;
+
+	/* Check for Multi-function device */
+	rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
+	if (rc) {
+		dbg("%s: rc = %d\n", __FUNCTION__, rc);
+		return rc;
+	}
+
+	if (temp_byte & 0x80)	/* Multi-function device */
+		max_functions = 8;
+	else
+		max_functions = 1;
+
+	function = 0;
+
+	do {
+		rc = configure_new_function(ctrl, new_slot, behind_bridge,
+					resources, bridge_bus, bridge_dev);
+
+		if (rc) {
+			dbg("configure_new_function failed: %d\n", rc);
+			index = 0;
+
+			while (new_slot) {
+				new_slot = pciehp_slot_find(new_slot->bus,
+						new_slot->device, index++);
+
+				if (new_slot)
+					pciehp_return_board_resources(new_slot,
+						resources);
+			}
+
+			return rc;
+		}
+
+		function++;
+
+		stop_it = 0;
+
+		/*  The following loop skips to the next present function
+		 *  and creates a board structure
+		 */
+
+		while ((function < max_functions) && (!stop_it)) {
+			pci_bus_read_config_dword(pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
+
+			if (ID == 0xFFFFFFFF) {	  /* There's nothing there. */
+				function++;
+			} else {  /* There's something there */
+				/* Setup slot structure. */
+				new_slot = pciehp_slot_create(func->bus);
+
+				if (new_slot == NULL) {
+					/* Out of memory */
+					return 1;
+				}
+
+				new_slot->bus = func->bus;
+				new_slot->device = func->device;
+				new_slot->function = function;
+				new_slot->is_a_board = 1;
+				new_slot->status = 0;
+
+				stop_it++;
+			}
+		}
+
+	} while (function < max_functions);
+	dbg("returning from %s\n", __FUNCTION__);
+
+	return 0;
+}
+
+/*
+ * Configuration logic that involves the hotplug data structures and 
+ * their bookkeeping
+ */
+
+/**
+ * configure_bridge: fill bridge's registers, either configure or disable it.
+ */
+static int
+configure_bridge(struct pci_bus *pci_bus, unsigned int devfn,
+			struct pci_resource *mem_node,
+			struct pci_resource **hold_mem_node,
+			int base_addr, int limit_addr)
+{
+	u16 temp_word;
+	u32 rc;
+
+	if (mem_node) {
+		memcpy(*hold_mem_node, mem_node, sizeof(struct pci_resource));
+		mem_node->next = NULL;
+
+		/* set Mem base and Limit registers */
+		RES_CHECK(mem_node->base, 16);
+		temp_word = (u16)(mem_node->base >> 16);
+		rc = pci_bus_write_config_word(pci_bus, devfn, base_addr, temp_word);
+
+		RES_CHECK(mem_node->base + mem_node->length - 1, 16);
+		temp_word = (u16)((mem_node->base + mem_node->length - 1) >> 16);
+		rc = pci_bus_write_config_word(pci_bus, devfn, limit_addr, temp_word);
+	} else {
+		temp_word = 0xFFFF;
+		rc = pci_bus_write_config_word(pci_bus, devfn, base_addr, temp_word);
+
+		temp_word = 0x0000;
+		rc = pci_bus_write_config_word(pci_bus, devfn, limit_addr, temp_word);
+
+		kfree(*hold_mem_node);
+		*hold_mem_node = NULL;
+	}
+	return rc;
+}
+
+static int
+configure_new_bridge(struct controller *ctrl, struct pci_func *func,
+		u8 behind_bridge, struct resource_lists *resources,
+		struct pci_bus *pci_bus)
+{
+	int cloop;
+	u8 temp_byte;
+	u8 device;
+	u16 temp_word;
+	u32 rc;
+	u32 ID;
+	unsigned int devfn;
+	struct pci_resource *mem_node;
+	struct pci_resource *p_mem_node;
+	struct pci_resource *io_node;
+	struct pci_resource *bus_node;
+	struct pci_resource *hold_mem_node;
+	struct pci_resource *hold_p_mem_node;
+	struct pci_resource *hold_IO_node;
+	struct pci_resource *hold_bus_node;
+	struct irq_mapping irqs;
+	struct pci_func *new_slot;
+	struct resource_lists temp_resources;
+
+	devfn = PCI_DEVFN(func->device, func->function);
+
+	/* set Primary bus */
+	dbg("set Primary bus = 0x%x\n", func->bus);
+	rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
+	if (rc)
+		return rc;
+
+	/* find range of busses to use */
+	bus_node = get_max_resource(&resources->bus_head, 1L);
+
+	/* If we don't have any busses to allocate, we can't continue */
+	if (!bus_node) {
+		err("Got NO bus resource to use\n");
+		return -ENOMEM;
+	}
+	dbg("Got ranges of buses to use: base:len=0x%x:%x\n", bus_node->base, bus_node->length);
+
+	/* set Secondary bus */
+	temp_byte = (u8)bus_node->base;
+	dbg("set Secondary bus = 0x%x\n", temp_byte);
+	rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte);
+	if (rc)
+		return rc;
+
+	/* set subordinate bus */
+	temp_byte = (u8)(bus_node->base + bus_node->length - 1);
+	dbg("set subordinate bus = 0x%x\n", temp_byte);
+	rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
+	if (rc)
+		return rc;
+
+	/* Set HP parameters (Cache Line Size, Latency Timer) */
+	rc = pciehprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_BRIDGE);
+	if (rc)
+		return rc;
+
+	/* Setup the IO, memory, and prefetchable windows */
+
+	io_node = get_max_resource(&(resources->io_head), 0x1000L);
+	if (io_node) {
+		dbg("io_node(base, len, next) (%x, %x, %p)\n", io_node->base,
+				io_node->length, io_node->next);
+	}
+
+	mem_node = get_max_resource(&(resources->mem_head), 0x100000L);
+	if (mem_node) {
+		dbg("mem_node(base, len, next) (%x, %x, %p)\n", mem_node->base,
+				mem_node->length, mem_node->next);
+	}
+
+	if (resources->p_mem_head)
+		p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000L);
+	else {
+		/*
+		 * In some platform implementation, MEM and PMEM are not
+		 *  distinguished, and hence ACPI _CRS has only MEM entries
+		 *  for both MEM and PMEM.
+		 */
+		dbg("using MEM for PMEM\n");
+		p_mem_node = get_max_resource(&(resources->mem_head), 0x100000L);
+	}
+	if (p_mem_node) {
+		dbg("p_mem_node(base, len, next) (%x, %x, %p)\n", p_mem_node->base,
+				p_mem_node->length, p_mem_node->next);
+	}
+
+	/* set up the IRQ info */
+	if (!resources->irqs) {
+		irqs.barber_pole = 0;
+		irqs.interrupt[0] = 0;
+		irqs.interrupt[1] = 0;
+		irqs.interrupt[2] = 0;
+		irqs.interrupt[3] = 0;
+		irqs.valid_INT = 0;
+	} else {
+		irqs.barber_pole = resources->irqs->barber_pole;
+		irqs.interrupt[0] = resources->irqs->interrupt[0];
+		irqs.interrupt[1] = resources->irqs->interrupt[1];
+		irqs.interrupt[2] = resources->irqs->interrupt[2];
+		irqs.interrupt[3] = resources->irqs->interrupt[3];
+		irqs.valid_INT = resources->irqs->valid_INT;
+	}
+
+	/* set up resource lists that are now aligned on top and bottom
+	 * for anything behind the bridge.
+	 */
+	temp_resources.bus_head = bus_node;
+	temp_resources.io_head = io_node;
+	temp_resources.mem_head = mem_node;
+	temp_resources.p_mem_head = p_mem_node;
+	temp_resources.irqs = &irqs;
+
+	/* Make copies of the nodes we are going to pass down so that
+	 * if there is a problem,we can just use these to free resources
+	 */
+	hold_bus_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+	hold_IO_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+	hold_mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+	hold_p_mem_node = kmalloc(sizeof(struct pci_resource), GFP_KERNEL);
+
+	if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) {
+		kfree(hold_bus_node);
+		kfree(hold_IO_node);
+		kfree(hold_mem_node);
+		kfree(hold_p_mem_node);
+
+		return 1;
+	}
+
+	memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource));
+
+	bus_node->base += 1;
+	bus_node->length -= 1;
+	bus_node->next = NULL;
+
+	/* If we have IO resources copy them and fill in the bridge's
+	 * IO range registers
+	 */
+	if (io_node) {
+		memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
+		io_node->next = NULL;
+
+		/* set IO base and Limit registers */
+		RES_CHECK(io_node->base, 8);
+		temp_byte = (u8)(io_node->base >> 8);
+		rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte);
+
+		RES_CHECK(io_node->base + io_node->length - 1, 8);
+		temp_byte = (u8)((io_node->base + io_node->length - 1) >> 8);
+		rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+	} else {
+		kfree(hold_IO_node);
+		hold_IO_node = NULL;
+	}
+
+	/* If we have memory resources copy them and fill in the bridge's
+	 * memory range registers.  Otherwise, fill in the range
+	 * registers with values that disable them.
+	 */
+	rc = configure_bridge(pci_bus, devfn, mem_node, &hold_mem_node,
+				PCI_MEMORY_BASE, PCI_MEMORY_LIMIT);
+
+	/* If we have prefetchable memory resources copy them and 
+	 * fill in the bridge's memory range registers.  Otherwise,
+	 * fill in the range registers with values that disable them.
+	 */
+	rc = configure_bridge(pci_bus, devfn, p_mem_node, &hold_p_mem_node,
+				PCI_PREF_MEMORY_BASE, PCI_PREF_MEMORY_LIMIT);
+
+	/* Adjust this to compensate for extra adjustment in first loop */
+	irqs.barber_pole--;
+
+	rc = 0;
+
+	/* Here we actually find the devices and configure them */
+	for (device = 0; (device <= 0x1F) && !rc; device++) {
+		irqs.barber_pole = (irqs.barber_pole + 1) & 0x03;
+
+		ID = 0xFFFFFFFF;
+		pci_bus->number = hold_bus_node->base;
+		pci_bus_read_config_dword (pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+		pci_bus->number = func->bus;
+
+		if (ID != 0xFFFFFFFF) {	  /*  device Present */
+			/* Setup slot structure. */
+			new_slot = pciehp_slot_create(hold_bus_node->base);
+
+			if (new_slot == NULL) {
+				/* Out of memory */
+				rc = -ENOMEM;
+				continue;
+			}
+
+			new_slot->bus = hold_bus_node->base;
+			new_slot->device = device;
+			new_slot->function = 0;
+			new_slot->is_a_board = 1;
+			new_slot->status = 0;
+
+			rc = configure_new_device(ctrl, new_slot, 1,
+					&temp_resources, func->bus,
+					func->device);
+			dbg("configure_new_device rc=0x%x\n",rc);
+		}	/* End of IF (device in slot?) */
+	}		/* End of FOR loop */
+
+	if (rc) {
+		pciehp_destroy_resource_list(&temp_resources);
+
+		return_resource(&(resources->bus_head), hold_bus_node);
+		return_resource(&(resources->io_head), hold_IO_node);
+		return_resource(&(resources->mem_head), hold_mem_node);
+		return_resource(&(resources->p_mem_head), hold_p_mem_node);
+		return(rc);
+	}
+
+	/* save the interrupt routing information */
+	if (resources->irqs) {
+		resources->irqs->interrupt[0] = irqs.interrupt[0];
+		resources->irqs->interrupt[1] = irqs.interrupt[1];
+		resources->irqs->interrupt[2] = irqs.interrupt[2];
+		resources->irqs->interrupt[3] = irqs.interrupt[3];
+		resources->irqs->valid_INT = irqs.valid_INT;
+	} else if (!behind_bridge) {
+		/* We need to hook up the interrupts here */
+		for (cloop = 0; cloop < 4; cloop++) {
+			if (irqs.valid_INT & (0x01 << cloop)) {
+				rc = pciehp_set_irq(func->bus, func->device,
+							0x0A + cloop, irqs.interrupt[cloop]);
+				if (rc) {
+					pciehp_destroy_resource_list (&temp_resources);
+					return_resource(&(resources->bus_head), hold_bus_node);
+					return_resource(&(resources->io_head), hold_IO_node);
+					return_resource(&(resources->mem_head), hold_mem_node);
+					return_resource(&(resources->p_mem_head), hold_p_mem_node);
+					return rc;
+				}
+			}
+		}	/* end of for loop */
+	}
+
+	/* Return unused bus resources
+	 * First use the temporary node to store information for the board
+	 */
+	if (hold_bus_node && bus_node && temp_resources.bus_head) {
+		hold_bus_node->length = bus_node->base - hold_bus_node->base;
+
+		hold_bus_node->next = func->bus_head;
+		func->bus_head = hold_bus_node;
+
+		temp_byte = (u8)(temp_resources.bus_head->base - 1);
+
+		/* set subordinate bus */
+		dbg("re-set subordinate bus = 0x%x\n", temp_byte);
+		rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
+
+		if (temp_resources.bus_head->length == 0) {
+			kfree(temp_resources.bus_head);
+			temp_resources.bus_head = NULL;
+		} else {
+			dbg("return bus res of b:d(0x%x:%x) base:len(0x%x:%x)\n",
+				func->bus, func->device, temp_resources.bus_head->base, temp_resources.bus_head->length);
+			return_resource(&(resources->bus_head), temp_resources.bus_head);
+		}
+	}
+
+	/* If we have IO space available and there is some left,
+	 * return the unused portion
+	 */
+	if (hold_IO_node && temp_resources.io_head) {
+		io_node = do_pre_bridge_resource_split(&(temp_resources.io_head),
+							&hold_IO_node, 0x1000);
+
+		/* Check if we were able to split something off */
+		if (io_node) {
+			hold_IO_node->base = io_node->base + io_node->length;
+
+			RES_CHECK(hold_IO_node->base, 8);
+			temp_byte = (u8)((hold_IO_node->base) >> 8);
+			rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_BASE, temp_byte);
+
+			return_resource(&(resources->io_head), io_node);
+		}
+
+		io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000);
+
+		/*  Check if we were able to split something off */
+		if (io_node) {
+			/* First use the temporary node to store information for the board */
+			hold_IO_node->length = io_node->base - hold_IO_node->base;
+
+			/* If we used any, add it to the board's list */
+			if (hold_IO_node->length) {
+				hold_IO_node->next = func->io_head;
+				func->io_head = hold_IO_node;
+
+				RES_CHECK(io_node->base - 1, 8);
+				temp_byte = (u8)((io_node->base - 1) >> 8);
+				rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+
+				return_resource(&(resources->io_head), io_node);
+			} else {
+				/* it doesn't need any IO */
+				temp_byte = 0x00;
+				rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+
+				return_resource(&(resources->io_head), io_node);
+				kfree(hold_IO_node);
+			}
+		} else {
+			/* it used most of the range */
+			hold_IO_node->next = func->io_head;
+			func->io_head = hold_IO_node;
+		}
+	} else if (hold_IO_node) {
+		/* it used the whole range */
+		hold_IO_node->next = func->io_head;
+		func->io_head = hold_IO_node;
+	}
+
+	/* If we have memory space available and there is some left,
+	 * return the unused portion
+	 */
+	if (hold_mem_node && temp_resources.mem_head) {
+		mem_node = do_pre_bridge_resource_split(&(temp_resources.mem_head), &hold_mem_node, 0x100000L);
+
+		/* Check if we were able to split something off */
+		if (mem_node) {
+			hold_mem_node->base = mem_node->base + mem_node->length;
+
+			RES_CHECK(hold_mem_node->base, 16);
+			temp_word = (u16)((hold_mem_node->base) >> 16);
+			rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+			return_resource(&(resources->mem_head), mem_node);
+		}
+
+		mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000L);
+
+		/* Check if we were able to split something off */
+		if (mem_node) {
+			/* First use the temporary node to store information for the board */
+			hold_mem_node->length = mem_node->base - hold_mem_node->base;
+
+			if (hold_mem_node->length) {
+				hold_mem_node->next = func->mem_head;
+				func->mem_head = hold_mem_node;
+
+				/* configure end address */
+				RES_CHECK(mem_node->base - 1, 16);
+				temp_word = (u16)((mem_node->base - 1) >> 16);
+				rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+				/* Return unused resources to the pool */
+				return_resource(&(resources->mem_head), mem_node);
+			} else {
+				/* it doesn't need any Mem */
+				temp_word = 0x0000;
+				rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+				return_resource(&(resources->mem_head), mem_node);
+				kfree(hold_mem_node);
+			}
+		} else {
+			/* it used most of the range */
+			hold_mem_node->next = func->mem_head;
+			func->mem_head = hold_mem_node;
+		}
+	} else if (hold_mem_node) {
+		/* it used the whole range */
+		hold_mem_node->next = func->mem_head;
+		func->mem_head = hold_mem_node;
+	}
+
+	/* If we have prefetchable memory space available and there is some 
+	 * left at the end, return the unused portion
+	 */
+	if (hold_p_mem_node && temp_resources.p_mem_head) {
+		p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
+								&hold_p_mem_node, 0x100000L);
+
+		/* Check if we were able to split something off */
+		if (p_mem_node) {
+			hold_p_mem_node->base = p_mem_node->base + p_mem_node->length;
+
+			RES_CHECK(hold_p_mem_node->base, 16);
+			temp_word = (u16)((hold_p_mem_node->base) >> 16);
+			rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+			return_resource(&(resources->p_mem_head), p_mem_node);
+		}
+
+		p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000L);
+
+		/* Check if we were able to split something off */
+		if (p_mem_node) {
+			/* First use the temporary node to store information for the board */
+			hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base;
+
+			/* If we used any, add it to the board's list */
+			if (hold_p_mem_node->length) {
+				hold_p_mem_node->next = func->p_mem_head;
+				func->p_mem_head = hold_p_mem_node;
+
+				RES_CHECK(p_mem_node->base - 1, 16);
+				temp_word = (u16)((p_mem_node->base - 1) >> 16);
+				rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+				return_resource(&(resources->p_mem_head), p_mem_node);
+			} else {
+				/* it doesn't need any PMem */
+				temp_word = 0x0000;
+				rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+				return_resource(&(resources->p_mem_head), p_mem_node);
+				kfree(hold_p_mem_node);
+			}
+		} else {
+			/* it used the most of the range */
+			hold_p_mem_node->next = func->p_mem_head;
+			func->p_mem_head = hold_p_mem_node;
+		}
+	} else if (hold_p_mem_node) {
+		/* it used the whole range */
+		hold_p_mem_node->next = func->p_mem_head;
+		func->p_mem_head = hold_p_mem_node;
+	}
+
+	/* We should be configuring an IRQ and the bridge's base address
+	 * registers if it needs them.  Although we have never seen such
+	 * a device
+	 */
+
+	pciehprm_enable_card(ctrl, func, PCI_HEADER_TYPE_BRIDGE);
+
+	dbg("PCI Bridge Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, func->function);
+
+	return rc;
+}
+
+/**
+ * configure_new_function - Configures the PCI header information of one device
+ *
+ * @ctrl: pointer to controller structure
+ * @func: pointer to function structure
+ * @behind_bridge: 1 if this is a recursive call, 0 if not
+ * @resources: pointer to set of resource lists
+ *
+ * Calls itself recursively for bridged devices.
+ * Returns 0 if success
+ *
+ */
+static int
+configure_new_function(struct controller *ctrl, struct pci_func *func,
+		u8 behind_bridge, struct resource_lists *resources,
+		u8 bridge_bus, u8 bridge_dev)
+{
+	int cloop;
+	u8 temp_byte;
+	u8 class_code;
+	u16 temp_word;
+	u32 rc;
+	u32 temp_register;
+	u32 base;
+	unsigned int devfn;
+	struct pci_resource *mem_node;
+	struct pci_resource *io_node;
+	struct pci_bus lpci_bus, *pci_bus;
+
+	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
+	pci_bus = &lpci_bus;
+	pci_bus->number = func->bus;
+	devfn = PCI_DEVFN(func->device, func->function);
+
+	/* Check for Bridge */
+	rc = pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte);
+	if (rc)
+		return rc;
+	dbg("%s: bus %x dev %x func %x temp_byte = %x\n", __FUNCTION__,
+		func->bus, func->device, func->function, temp_byte);
+
+	if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+		rc = configure_new_bridge(ctrl, func, behind_bridge, resources,
+						pci_bus);
+
+		if (rc)
+			return rc;
+	} else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
+		/* Standard device */
+		u64	base64;
+		rc = pci_bus_read_config_byte(pci_bus, devfn, 0x0B, &class_code);
+
+		if (class_code == PCI_BASE_CLASS_DISPLAY)
+			return DEVICE_TYPE_NOT_SUPPORTED;
+
+		/* Figure out IO and memory needs */
+		for (cloop = PCI_BASE_ADDRESS_0; cloop <= PCI_BASE_ADDRESS_5; cloop += 4) {
+			temp_register = 0xFFFFFFFF;
+
+			rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
+			rc = pci_bus_read_config_dword(pci_bus, devfn, cloop, &temp_register);
+			dbg("Bar[%x]=0x%x on bus:dev:func(0x%x:%x:%x)\n", cloop, temp_register, 
+				func->bus, func->device, func->function);
+
+			if (!temp_register)
+				continue;
+
+			base64 = 0L;
+			if (temp_register & PCI_BASE_ADDRESS_SPACE_IO) {
+				/* Map IO */
+
+				/* set base = amount of IO space */
+				base = temp_register & 0xFFFFFFFC;
+				base = ~base + 1;
+
+				dbg("NEED IO length(0x%x)\n", base);
+				io_node = get_io_resource(&(resources->io_head),(ulong)base);
+
+				/* allocate the resource to the board */
+				if (io_node) {
+					dbg("Got IO base=0x%x(length=0x%x)\n", io_node->base, io_node->length);
+					base = (u32)io_node->base;
+					io_node->next = func->io_head;
+					func->io_head = io_node;
+				} else {
+					err("Got NO IO resource(length=0x%x)\n", base);
+					return -ENOMEM;
+				}
+			} else {	/* map MEM */
+				int prefetchable = 1;
+				struct pci_resource **res_node = &func->p_mem_head;
+				char *res_type_str = "PMEM";
+				u32	temp_register2;
+
+				if (!(temp_register & PCI_BASE_ADDRESS_MEM_PREFETCH)) {
+					prefetchable = 0;
+					res_node = &func->mem_head;
+					res_type_str++;
+				}
+
+				base = temp_register & 0xFFFFFFF0;
+				base = ~base + 1;
+
+				switch (temp_register & PCI_BASE_ADDRESS_MEM_TYPE_MASK) {
+				case PCI_BASE_ADDRESS_MEM_TYPE_32:
+					dbg("NEED 32 %s bar=0x%x(length=0x%x)\n", res_type_str, temp_register, base);
+
+					if (prefetchable && resources->p_mem_head)
+						mem_node=get_resource(&(resources->p_mem_head), (ulong)base);
+					else {
+						if (prefetchable)
+							dbg("using MEM for PMEM\n");
+						mem_node = get_resource(&(resources->mem_head), (ulong)base);
+					}
+
+					/* allocate the resource to the board */
+					if (mem_node) {
+						base = (u32)mem_node->base; 
+						mem_node->next = *res_node;
+						*res_node = mem_node;
+						dbg("Got 32 %s base=0x%x(length=0x%x)\n", res_type_str, mem_node->base, 
+							mem_node->length);
+					} else {
+						err("Got NO 32 %s resource(length=0x%x)\n", res_type_str, base);
+						return -ENOMEM;
+					}
+					break;
+				case PCI_BASE_ADDRESS_MEM_TYPE_64:
+					rc = pci_bus_read_config_dword(pci_bus, devfn, cloop+4, &temp_register2);
+					dbg("NEED 64 %s bar=0x%x:%x(length=0x%x)\n", res_type_str, temp_register2, 
+						temp_register, base);
+
+					if (prefetchable && resources->p_mem_head)
+						mem_node = get_resource(&(resources->p_mem_head), (ulong)base);
+					else {
+						if (prefetchable)
+							dbg("using MEM for PMEM\n");
+						mem_node = get_resource(&(resources->mem_head), (ulong)base);
+					}
+
+					/* allocate the resource to the board */
+					if (mem_node) {
+						base64 = mem_node->base; 
+						mem_node->next = *res_node;
+						*res_node = mem_node;
+						dbg("Got 64 %s base=0x%x:%x(length=%x)\n", res_type_str, (u32)(base64 >> 32), 
+							(u32)base64, mem_node->length);
+					} else {
+						err("Got NO 64 %s resource(length=0x%x)\n", res_type_str, base);
+						return -ENOMEM;
+					}
+					break;
+				default:
+					dbg("reserved BAR type=0x%x\n", temp_register);
+					break;
+				}
+
+			}
+
+			if (base64) {
+				rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64);
+				cloop += 4;
+				base64 >>= 32;
+
+				if (base64) {
+					dbg("%s: high dword of base64(0x%x) set to 0\n", __FUNCTION__, (u32)base64);
+					base64 = 0x0L;
+				}
+
+				rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, (u32)base64);
+			} else {
+				rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
+			}
+		}		/* End of base register loop */
+
+		/* disable ROM base Address */
+		temp_word = 0x00L;
+		rc = pci_bus_write_config_word (pci_bus, devfn, PCI_ROM_ADDRESS, temp_word);
+
+		/* Set HP parameters (Cache Line Size, Latency Timer) */
+		rc = pciehprm_set_hpp(ctrl, func, PCI_HEADER_TYPE_NORMAL);
+		if (rc)
+			return rc;
+
+		pciehprm_enable_card(ctrl, func, PCI_HEADER_TYPE_NORMAL);
+
+		dbg("PCI function Hot-Added s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus, func->device, 
+			func->function);
+	}  /* End of Not-A-Bridge else */
+	else {
+		/* It's some strange type of PCI adapter (Cardbus?) */
+		return DEVICE_TYPE_NOT_SUPPORTED;
+	}
+
+	func->configured = 1;
+
+	return 0;
+}