diff options
author | Linus Torvalds | 2020-04-03 14:25:02 -0700 |
---|---|---|
committer | Linus Torvalds | 2020-04-03 14:25:02 -0700 |
commit | 86f26a77cb0cf532a92be18d2c065f5158e1a545 (patch) | |
tree | fd4af47dfa7c658d569498f151fc696b4a6c9d38 /drivers/phy/amlogic | |
parent | 0ad5b053d438990fabaa324499abb6131b9d2202 (diff) | |
parent | 86ce3c90c910110540ac25cae5d9b90b268542bd (diff) |
Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
Diffstat (limited to 'drivers/phy/amlogic')
-rw-r--r-- | drivers/phy/amlogic/Kconfig | 22 | ||||
-rw-r--r-- | drivers/phy/amlogic/Makefile | 12 | ||||
-rw-r--r-- | drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c | 188 | ||||
-rw-r--r-- | drivers/phy/amlogic/phy-meson-axg-pcie.c | 192 |
4 files changed, 409 insertions, 5 deletions
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index af774ac2b934..71801e30d601 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -59,3 +59,25 @@ config PHY_MESON_G12A_USB3_PCIE Enable this to support the Meson USB3 + PCIE Combo PHY found in Meson G12A SoCs. If unsure, say N. + +config PHY_MESON_AXG_PCIE + tristate "Meson AXG PCIE PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson MIPI + PCIE PHY found + in Meson AXG SoCs. + If unsure, say N. + +config PHY_MESON_AXG_MIPI_PCIE_ANALOG + tristate "Meson AXG MIPI + PCIE analog PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson MIPI + PCIE analog PHY + found in Meson AXG SoCs. + If unsure, say N. diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index 11d1c42ac2be..e2baa133f7af 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o -obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o -obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o -obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o -obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o +obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o +obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o +obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o +obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o +obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o +obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o +obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c new file mode 100644 index 000000000000..1431cbf885e1 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic AXG MIPI + PCIE analog PHY driver + * + * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt> + */ +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <dt-bindings/phy/phy.h> + +#define HHI_MIPI_CNTL0 0x00 +#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28) +#define HHI_MIPI_CNTL0_ENABLE BIT(29) +#define HHI_MIPI_CNTL0_BANDGAP BIT(26) +#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12) +#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3) + +#define HHI_MIPI_CNTL1 0x01 +#define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12) +#define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4) +#define HHI_MIPI_CNTL1_LP_RESISTER BIT(3) +#define HHI_MIPI_CNTL1_INPUT_SETTING BIT(2) +#define HHI_MIPI_CNTL1_INPUT_SEL BIT(1) +#define HHI_MIPI_CNTL1_PRBS7_EN BIT(0) + +#define HHI_MIPI_CNTL2 0x02 +#define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25) +#define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19) +#define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18) +#define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17) +#define HHI_MIPI_CNTL2_LPULPS_EN BIT(16) +#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n)) +#define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1) + +struct phy_axg_mipi_pcie_analog_priv { + struct phy *phy; + unsigned int mode; + struct regmap *regmap; +}; + +static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = HHI_MIPI_CNTL2, +}; + +static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy) +{ + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); + + /* MIPI not supported yet */ + if (priv->mode != PHY_TYPE_PCIE) + return -EINVAL; + + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP); + + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE); + return 0; +} + +static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy) +{ + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy); + + /* MIPI not supported yet */ + if (priv->mode != PHY_TYPE_PCIE) + return -EINVAL; + + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_BANDGAP, 0); + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, + HHI_MIPI_CNTL0_ENABLE, 0); + return 0; +} + +static int phy_axg_mipi_pcie_analog_init(struct phy *phy) +{ + return 0; +} + +static int phy_axg_mipi_pcie_analog_exit(struct phy *phy) +{ + return 0; +} + +static const struct phy_ops phy_axg_mipi_pcie_analog_ops = { + .init = phy_axg_mipi_pcie_analog_init, + .exit = phy_axg_mipi_pcie_analog_exit, + .power_on = phy_axg_mipi_pcie_analog_power_on, + .power_off = phy_axg_mipi_pcie_analog_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev); + unsigned int mode; + + if (args->args_count != 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + mode = args->args[0]; + + /* MIPI mode is not supported yet */ + if (mode != PHY_TYPE_PCIE) { + dev_err(dev, "invalid phy mode select argument\n"); + return ERR_PTR(-EINVAL); + } + + priv->mode = mode; + return priv->phy; +} + +static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev) +{ + struct phy_provider *phy; + struct device *dev = &pdev->dev; + struct phy_axg_mipi_pcie_analog_priv *priv; + struct device_node *np = dev->of_node; + struct regmap *map; + struct resource *res; + void __iomem *base; + int ret; + + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) { + dev_err(dev, "failed to get regmap base\n"); + return PTR_ERR(base); + } + + map = devm_regmap_init_mmio(dev, base, + &phy_axg_mipi_pcie_analog_regmap_conf); + if (IS_ERR(map)) { + dev_err(dev, "failed to get HHI regmap\n"); + return PTR_ERR(map); + } + priv->regmap = map; + + priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops); + if (IS_ERR(priv->phy)) { + ret = PTR_ERR(priv->phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + return ret; + } + + phy_set_drvdata(priv->phy, priv); + dev_set_drvdata(dev, priv); + + phy = devm_of_phy_provider_register(dev, + phy_axg_mipi_pcie_analog_xlate); + + return PTR_ERR_OR_ZERO(phy); +} + +static const struct of_device_id phy_axg_mipi_pcie_analog_of_match[] = { + { + .compatible = "amlogic,axg-mipi-pcie-analog-phy", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_axg_mipi_pcie_analog_of_match); + +static struct platform_driver phy_axg_mipi_pcie_analog_driver = { + .probe = phy_axg_mipi_pcie_analog_probe, + .driver = { + .name = "phy-axg-mipi-pcie-analog", + .of_match_table = phy_axg_mipi_pcie_analog_of_match, + }, +}; +module_platform_driver(phy_axg_mipi_pcie_analog_driver); + +MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>"); +MODULE_DESCRIPTION("Amlogic AXG MIPI + PCIE analog PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c new file mode 100644 index 000000000000..377ed0dcd0d9 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic AXG PCIE PHY driver + * + * Copyright (C) 2020 Remi Pommarel <repk@triplefau.lt> + */ +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/platform_device.h> +#include <linux/bitfield.h> +#include <dt-bindings/phy/phy.h> + +#define MESON_PCIE_REG0 0x00 +#define MESON_PCIE_COMMON_CLK BIT(4) +#define MESON_PCIE_PORT_SEL GENMASK(3, 2) +#define MESON_PCIE_CLK BIT(1) +#define MESON_PCIE_POWERDOWN BIT(0) + +#define MESON_PCIE_TWO_X1 FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3) +#define MESON_PCIE_COMMON_REF_CLK FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1) +#define MESON_PCIE_PHY_INIT (MESON_PCIE_TWO_X1 | \ + MESON_PCIE_COMMON_REF_CLK) +#define MESON_PCIE_RESET_DELAY 500 + +struct phy_axg_pcie_priv { + struct phy *phy; + struct phy *analog; + struct regmap *regmap; + struct reset_control *reset; +}; + +static const struct regmap_config phy_axg_pcie_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = MESON_PCIE_REG0, +}; + +static int phy_axg_pcie_power_on(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_power_on(priv->analog); + if (ret != 0) + return ret; + + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, + MESON_PCIE_POWERDOWN, 0); + return 0; +} + +static int phy_axg_pcie_power_off(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_power_off(priv->analog); + if (ret != 0) + return ret; + + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, + MESON_PCIE_POWERDOWN, 1); + return 0; +} + +static int phy_axg_pcie_init(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_init(priv->analog); + if (ret != 0) + return ret; + + regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT); + return reset_control_reset(priv->reset); +} + +static int phy_axg_pcie_exit(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_exit(priv->analog); + if (ret != 0) + return ret; + + return reset_control_reset(priv->reset); +} + +static int phy_axg_pcie_reset(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + ret = phy_reset(priv->analog); + if (ret != 0) + goto out; + + ret = reset_control_assert(priv->reset); + if (ret != 0) + goto out; + udelay(MESON_PCIE_RESET_DELAY); + + ret = reset_control_deassert(priv->reset); + if (ret != 0) + goto out; + udelay(MESON_PCIE_RESET_DELAY); + +out: + return ret; +} + +static const struct phy_ops phy_axg_pcie_ops = { + .init = phy_axg_pcie_init, + .exit = phy_axg_pcie_exit, + .power_on = phy_axg_pcie_power_on, + .power_off = phy_axg_pcie_power_off, + .reset = phy_axg_pcie_reset, + .owner = THIS_MODULE, +}; + +static int phy_axg_pcie_probe(struct platform_device *pdev) +{ + struct phy_provider *pphy; + struct device *dev = &pdev->dev; + struct phy_axg_pcie_priv *priv; + struct device_node *np = dev->of_node; + struct resource *res; + void __iomem *base; + int ret; + + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); + if (IS_ERR(priv->phy)) { + ret = PTR_ERR(priv->phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_axg_pcie_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->reset = devm_reset_control_array_get(dev, false, false); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->analog = devm_phy_get(dev, "analog"); + if (IS_ERR(priv->analog)) + return PTR_ERR(priv->analog); + + phy_set_drvdata(priv->phy, priv); + dev_set_drvdata(dev, priv); + pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(pphy); +} + +static const struct of_device_id phy_axg_pcie_of_match[] = { + { + .compatible = "amlogic,axg-pcie-phy", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match); + +static struct platform_driver phy_axg_pcie_driver = { + .probe = phy_axg_pcie_probe, + .driver = { + .name = "phy-axg-pcie", + .of_match_table = phy_axg_pcie_of_match, + }, +}; +module_platform_driver(phy_axg_pcie_driver); + +MODULE_AUTHOR("Remi Pommarel <repk@triplefau.lt>"); +MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver"); +MODULE_LICENSE("GPL v2"); |