Merge tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 5.2

  *) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
     that can be used to undo the operation performed in xlate
  *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
     G12A SoC Family.
  *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
     one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
  *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
  *) Add new driver to support UFS M-PHY in MediaTek SoC
  *) Add new driver to support XUSB pad controller in Tegra186 SoCs
  *) Add new driver to support SERDES in TI's AM654 platform
  *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
     to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
  *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
  *) Add support for SERDES6G in phy-ocelot-serdes.c
  *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
  *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
  *) Add support to shut off regulators that power UFS during system suspend
  *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
     channel which helps to enable/disable interrupts for each instance
     independently
  *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
     PHY operates correctly over the entire temperature range.
  *) Use devm_clk_get_optional to get optional clocks instead of adding
     custom error checks

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (51 commits)
  dt-bindings: phy-qcom-qmp: Tweak qcom,msm8998-qmp-ufs-phy
  dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-pcie-phy
  phy: Add usb phy support for hi3660 Soc of Hisilicon
  dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
  scsi: phy: mediatek: fix typo in author's email address
  phy: ocelot-serdes: Add support for SERDES6G muxing
  phy: fsl-imx8mq-usb: add support for VBUS power control
  dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator
  phy: qcom-qmp: Add msm8998 PCIe QMP PHY support
  phy: ti: am654-serdes: Support all clksel values
  phy: ti: Add a new SERDES driver for TI's AM654x SoC
  dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC
  phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback
  phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHY
  phy: phy-meson-gxl-usb2: get optional clock by devm_clk_get_optional()
  phy: socionext: get optional clock by devm_clk_get_optional()
  phy: qcom-qusb2: get optional clock by devm_clk_get_optional()
  phy: phy-mtk-tphy: get optional clock by devm_clk_get_optional()
  phy: renesas: rcar-gen3-usb2: enable/disable independent irqs
  phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()
  ...

39 files changed, 4464 insertions, 310 deletions

diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 23fe1cda2f70..4c08c1ccdd04 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -36,3 +36,25 @@ config PHY_MESON_GXL_USB3
 	  Enable this to support the Meson USB3 PHY and OTG detection
 	  IP block found in Meson GXL and GXM SoCs.
 	  If unsure, say N.
+
+config PHY_MESON_G12A_USB2
+	tristate "Meson G12A USB2 PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB2 PHYs found in Meson
+	  G12A SoCs.
+	  If unsure, say N.
+
+config PHY_MESON_G12A_USB3_PCIE
+	tristate "Meson G12A USB3+PCIE Combo PHY driver"
+	default ARCH_MESON
+	depends on OF && (ARCH_MESON || COMPILE_TEST)
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to support the Meson USB3 + PCIE Combo PHY found
+	  in Meson G12A SoCs.
+	  If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
index 4fd8848c194d..fdd008e1b19b 100644
--- a/drivers/phy/amlogic/Makefile
+++ b/drivers/phy/amlogic/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o
 obj-$(CONFIG_PHY_MESON_GXL_USB2)	+= phy-meson-gxl-usb2.o
+obj-$(CONFIG_PHY_MESON_G12A_USB2)	+= phy-meson-g12a-usb2.o
 obj-$(CONFIG_PHY_MESON_GXL_USB3)	+= phy-meson-gxl-usb3.o
+obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE)	+= phy-meson-g12a-usb3-pcie.o
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
new file mode 100644
index 000000000000..9065ffc85eb4
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson G12A USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PHY_CTRL_R0						0x0
+#define PHY_CTRL_R1						0x4
+#define PHY_CTRL_R2						0x8
+#define PHY_CTRL_R3						0xc
+	#define PHY_CTRL_R3_SQUELCH_REF				GENMASK(1, 0)
+	#define PHY_CTRL_R3_HSDIC_REF				GENMASK(3, 2)
+	#define PHY_CTRL_R3_DISC_THRESH				GENMASK(7, 4)
+
+#define PHY_CTRL_R4						0x10
+	#define PHY_CTRL_R4_CALIB_CODE_7_0			GENMASK(7, 0)
+	#define PHY_CTRL_R4_CALIB_CODE_15_8			GENMASK(15, 8)
+	#define PHY_CTRL_R4_CALIB_CODE_23_16			GENMASK(23, 16)
+	#define PHY_CTRL_R4_I_C2L_CAL_EN			BIT(24)
+	#define PHY_CTRL_R4_I_C2L_CAL_RESET_N			BIT(25)
+	#define PHY_CTRL_R4_I_C2L_CAL_DONE			BIT(26)
+	#define PHY_CTRL_R4_TEST_BYPASS_MODE_EN			BIT(27)
+	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0			GENMASK(29, 28)
+	#define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2			GENMASK(31, 30)
+
+#define PHY_CTRL_R5						0x14
+#define PHY_CTRL_R6						0x18
+#define PHY_CTRL_R7						0x1c
+#define PHY_CTRL_R8						0x20
+#define PHY_CTRL_R9						0x24
+#define PHY_CTRL_R10						0x28
+#define PHY_CTRL_R11						0x2c
+#define PHY_CTRL_R12						0x30
+#define PHY_CTRL_R13						0x34
+	#define PHY_CTRL_R13_CUSTOM_PATTERN_19			GENMASK(7, 0)
+	#define PHY_CTRL_R13_LOAD_STAT				BIT(14)
+	#define PHY_CTRL_R13_UPDATE_PMA_SIGNALS			BIT(15)
+	#define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET		GENMASK(20, 16)
+	#define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT		BIT(21)
+	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL		BIT(22)
+	#define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN		BIT(23)
+	#define PHY_CTRL_R13_I_C2L_HS_EN			BIT(24)
+	#define PHY_CTRL_R13_I_C2L_FS_EN			BIT(25)
+	#define PHY_CTRL_R13_I_C2L_LS_EN			BIT(26)
+	#define PHY_CTRL_R13_I_C2L_HS_OE			BIT(27)
+	#define PHY_CTRL_R13_I_C2L_FS_OE			BIT(28)
+	#define PHY_CTRL_R13_I_C2L_HS_RX_EN			BIT(29)
+	#define PHY_CTRL_R13_I_C2L_FSLS_RX_EN			BIT(30)
+
+#define PHY_CTRL_R14						0x38
+	#define PHY_CTRL_R14_I_RDP_EN				BIT(0)
+	#define PHY_CTRL_R14_I_RPU_SW1_EN			BIT(1)
+	#define PHY_CTRL_R14_I_RPU_SW2_EN			GENMASK(2, 3)
+	#define PHY_CTRL_R14_PG_RSTN				BIT(4)
+	#define PHY_CTRL_R14_I_C2L_DATA_16_8			BIT(5)
+	#define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO	BIT(6)
+	#define PHY_CTRL_R14_BYPASS_CTRL_7_0			GENMASK(15, 8)
+	#define PHY_CTRL_R14_BYPASS_CTRL_15_8			GENMASK(23, 16)
+
+#define PHY_CTRL_R15						0x3c
+#define PHY_CTRL_R16						0x40
+	#define PHY_CTRL_R16_MPLL_M				GENMASK(8, 0)
+	#define PHY_CTRL_R16_MPLL_N				GENMASK(14, 10)
+	#define PHY_CTRL_R16_MPLL_TDC_MODE			BIT(20)
+	#define PHY_CTRL_R16_MPLL_SDM_EN			BIT(21)
+	#define PHY_CTRL_R16_MPLL_LOAD				BIT(22)
+	#define PHY_CTRL_R16_MPLL_DCO_SDM_EN			BIT(23)
+	#define PHY_CTRL_R16_MPLL_LOCK_LONG			GENMASK(25, 24)
+	#define PHY_CTRL_R16_MPLL_LOCK_F			BIT(26)
+	#define PHY_CTRL_R16_MPLL_FAST_LOCK			BIT(27)
+	#define PHY_CTRL_R16_MPLL_EN				BIT(28)
+	#define PHY_CTRL_R16_MPLL_RESET				BIT(29)
+	#define PHY_CTRL_R16_MPLL_LOCK				BIT(30)
+	#define PHY_CTRL_R16_MPLL_LOCK_DIG			BIT(31)
+
+#define PHY_CTRL_R17						0x44
+	#define PHY_CTRL_R17_MPLL_FRAC_IN			GENMASK(13, 0)
+	#define PHY_CTRL_R17_MPLL_FIX_EN			BIT(16)
+	#define PHY_CTRL_R17_MPLL_LAMBDA1			GENMASK(19, 17)
+	#define PHY_CTRL_R17_MPLL_LAMBDA0			GENMASK(22, 20)
+	#define PHY_CTRL_R17_MPLL_FILTER_MODE			BIT(23)
+	#define PHY_CTRL_R17_MPLL_FILTER_PVT2			GENMASK(27, 24)
+	#define PHY_CTRL_R17_MPLL_FILTER_PVT1			GENMASK(31, 28)
+
+#define PHY_CTRL_R18						0x48
+	#define PHY_CTRL_R18_MPLL_LKW_SEL			GENMASK(1, 0)
+	#define PHY_CTRL_R18_MPLL_LK_W				GENMASK(5, 2)
+	#define PHY_CTRL_R18_MPLL_LK_S				GENMASK(11, 6)
+	#define PHY_CTRL_R18_MPLL_DCO_M_EN			BIT(12)
+	#define PHY_CTRL_R18_MPLL_DCO_CLK_SEL			BIT(13)
+	#define PHY_CTRL_R18_MPLL_PFD_GAIN			GENMASK(15, 14)
+	#define PHY_CTRL_R18_MPLL_ROU				GENMASK(18, 16)
+	#define PHY_CTRL_R18_MPLL_DATA_SEL			GENMASK(21, 19)
+	#define PHY_CTRL_R18_MPLL_BIAS_ADJ			GENMASK(23, 22)
+	#define PHY_CTRL_R18_MPLL_BB_MODE			GENMASK(25, 24)
+	#define PHY_CTRL_R18_MPLL_ALPHA				GENMASK(28, 26)
+	#define PHY_CTRL_R18_MPLL_ADJ_LDO			GENMASK(30, 29)
+	#define PHY_CTRL_R18_MPLL_ACG_RANGE			BIT(31)
+
+#define PHY_CTRL_R19						0x4c
+#define PHY_CTRL_R20						0x50
+	#define PHY_CTRL_R20_USB2_IDDET_EN			BIT(0)
+	#define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0		GENMASK(3, 1)
+	#define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN		BIT(4)
+	#define PHY_CTRL_R20_USB2_AMON_EN			BIT(5)
+	#define PHY_CTRL_R20_USB2_CAL_CODE_R5			BIT(6)
+	#define PHY_CTRL_R20_BYPASS_OTG_DET			BIT(7)
+	#define PHY_CTRL_R20_USB2_DMON_EN			BIT(8)
+	#define PHY_CTRL_R20_USB2_DMON_SEL_3_0			GENMASK(12, 9)
+	#define PHY_CTRL_R20_USB2_EDGE_DRV_EN			BIT(13)
+	#define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0		GENMASK(15, 14)
+	#define PHY_CTRL_R20_USB2_BGR_ADJ_4_0			GENMASK(20, 16)
+	#define PHY_CTRL_R20_USB2_BGR_START			BIT(21)
+	#define PHY_CTRL_R20_USB2_BGR_VREF_4_0			GENMASK(28, 24)
+	#define PHY_CTRL_R20_USB2_BGR_DBG_1_0			GENMASK(30, 29)
+	#define PHY_CTRL_R20_BYPASS_CAL_DONE_R5			BIT(31)
+
+#define PHY_CTRL_R21						0x54
+	#define PHY_CTRL_R21_USB2_BGR_FORCE			BIT(0)
+	#define PHY_CTRL_R21_USB2_CAL_ACK_EN			BIT(1)
+	#define PHY_CTRL_R21_USB2_OTG_ACA_EN			BIT(2)
+	#define PHY_CTRL_R21_USB2_TX_STRG_PD			BIT(3)
+	#define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0		GENMASK(5, 4)
+	#define PHY_CTRL_R21_BYPASS_UTMI_CNTR			GENMASK(15, 6)
+	#define PHY_CTRL_R21_BYPASS_UTMI_REG			GENMASK(25, 20)
+
+#define PHY_CTRL_R22						0x58
+#define PHY_CTRL_R23						0x5c
+
+#define RESET_COMPLETE_TIME					1000
+#define PLL_RESET_COMPLETE_TIME					100
+
+struct phy_meson_g12a_usb2_priv {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct clk		*clk;
+	struct reset_control	*reset;
+};
+
+static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_CTRL_R23,
+};
+
+static int phy_meson_g12a_usb2_init(struct phy *phy)
+{
+	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(RESET_COMPLETE_TIME);
+
+	/* usb2_otg_aca_en == 0 */
+	regmap_update_bits(priv->regmap, PHY_CTRL_R21,
+			   PHY_CTRL_R21_USB2_OTG_ACA_EN, 0);
+
+	/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
+	regmap_write(priv->regmap, PHY_CTRL_R16,
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
+		     PHY_CTRL_R16_MPLL_LOAD |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
+		     PHY_CTRL_R16_MPLL_FAST_LOCK |
+		     PHY_CTRL_R16_MPLL_EN |
+		     PHY_CTRL_R16_MPLL_RESET);
+
+	regmap_write(priv->regmap, PHY_CTRL_R17,
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) |
+		     FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9));
+
+	regmap_write(priv->regmap, PHY_CTRL_R18,
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) |
+		     FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) |
+		     PHY_CTRL_R18_MPLL_ACG_RANGE);
+
+	udelay(PLL_RESET_COMPLETE_TIME);
+
+	/* UnReset PLL */
+	regmap_write(priv->regmap, PHY_CTRL_R16,
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) |
+		     PHY_CTRL_R16_MPLL_LOAD |
+		     FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) |
+		     PHY_CTRL_R16_MPLL_FAST_LOCK |
+		     PHY_CTRL_R16_MPLL_EN);
+
+	/* PHY Tuning */
+	regmap_write(priv->regmap, PHY_CTRL_R20,
+		     FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) |
+		     PHY_CTRL_R20_USB2_OTG_VBUSDET_EN |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) |
+		     PHY_CTRL_R20_USB2_EDGE_DRV_EN |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0));
+
+	regmap_write(priv->regmap, PHY_CTRL_R4,
+		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) |
+		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) |
+		     FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) |
+		     PHY_CTRL_R4_TEST_BYPASS_MODE_EN |
+		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) |
+		     FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0));
+
+	/* Tuning Disconnect Threshold */
+	regmap_write(priv->regmap, PHY_CTRL_R3,
+		     FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) |
+		     FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) |
+		     FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3));
+
+	/* Analog Settings */
+	regmap_write(priv->regmap, PHY_CTRL_R14, 0);
+	regmap_write(priv->regmap, PHY_CTRL_R13,
+		     PHY_CTRL_R13_UPDATE_PMA_SIGNALS |
+		     FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7));
+
+	return 0;
+}
+
+static int phy_meson_g12a_usb2_exit(struct phy *phy)
+{
+	struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy);
+
+	return reset_control_reset(priv->reset);
+}
+
+/* set_mode is not needed, mode setting is handled via the UTMI bus */
+static const struct phy_ops phy_meson_g12a_usb2_ops = {
+	.init		= phy_meson_g12a_usb2_init,
+	.exit		= phy_meson_g12a_usb2_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_meson_g12a_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct phy_meson_g12a_usb2_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_meson_g12a_usb2_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->clk = devm_clk_get(dev, "xtal");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->reset = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops);
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+
+		return ret;
+	}
+
+	phy_set_bus_width(phy, 8);
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_g12a_usb2_of_match[] = {
+	{ .compatible = "amlogic,g12a-usb2-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match);
+
+static struct platform_driver phy_meson_g12a_usb2_driver = {
+	.probe	= phy_meson_g12a_usb2_probe,
+	.driver	= {
+		.name		= "phy-meson-g12a-usb2",
+		.of_match_table	= phy_meson_g12a_usb2_of_match,
+	},
+};
+module_platform_driver(phy_meson_g12a_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Meson G12A USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
new file mode 100644
index 000000000000..6233a7979a93
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Amlogic G12A USB3 + PCIE Combo PHY driver
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/phy/phy.h>
+
+#define PHY_R0							0x00
+	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
+	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)
+
+#define PHY_R1							0x04
+	#define PHY_R1_PHY_TX1_TERM_OFFSET			GENMASK(4, 0)
+	#define PHY_R1_PHY_TX0_TERM_OFFSET			GENMASK(9, 5)
+	#define PHY_R1_PHY_RX1_EQ				GENMASK(12, 10)
+	#define PHY_R1_PHY_RX0_EQ				GENMASK(15, 13)
+	#define PHY_R1_PHY_LOS_LEVEL				GENMASK(20, 16)
+	#define PHY_R1_PHY_LOS_BIAS				GENMASK(23, 21)
+	#define PHY_R1_PHY_REF_CLKDIV2				BIT(24)
+	#define PHY_R1_PHY_MPLL_MULTIPLIER			GENMASK(31, 25)
+
+#define PHY_R2							0x08
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB			GENMASK(5, 0)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB			GENMASK(11, 6)
+	#define PHY_R2_PCS_TX_DEEMPH_GEN1			GENMASK(17, 12)
+	#define PHY_R2_PHY_TX_VBOOST_LVL			GENMASK(20, 18)
+
+#define PHY_R4							0x10
+	#define PHY_R4_PHY_CR_WRITE				BIT(0)
+	#define PHY_R4_PHY_CR_READ				BIT(1)
+	#define PHY_R4_PHY_CR_DATA_IN				GENMASK(17, 2)
+	#define PHY_R4_PHY_CR_CAP_DATA				BIT(18)
+	#define PHY_R4_PHY_CR_CAP_ADDR				BIT(19)
+
+#define PHY_R5							0x14
+	#define PHY_R5_PHY_CR_DATA_OUT				GENMASK(15, 0)
+	#define PHY_R5_PHY_CR_ACK				BIT(16)
+	#define PHY_R5_PHY_BS_OUT				BIT(17)
+
+struct phy_g12a_usb3_pcie_priv {
+	struct regmap		*regmap;
+	struct regmap		*regmap_cr;
+	struct clk		*clk_ref;
+	struct reset_control	*reset;
+	struct phy		*phy;
+	unsigned int		mode;
+};
+
+static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PHY_R5,
+};
+
+static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
+					  unsigned int addr)
+{
+	unsigned int val, reg;
+	int ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr,
+					  unsigned int *data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+	regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);
+
+	regmap_write(priv->regmap, PHY_R4, 0);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       !(val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr,
+					   unsigned int data)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = context;
+	unsigned int val, reg;
+	int ret;
+
+	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
+	if (ret)
+		return ret;
+
+	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK),
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	regmap_write(priv->regmap, PHY_R4, reg);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
+				       (val & PHY_R5_PHY_CR_ACK) == 0,
+				       5, 1000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
+	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
+	.max_register = 0xffff,
+	.fast_io = true,
+};
+
+static int phy_g12a_usb3_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int data, ret;
+
+	/* Switch PHY to USB3 */
+	/* TODO figure out how to handle when PCIe was set in the bootloader */
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_USB3_SWITCH,
+			   PHY_R0_PCIE_USB3_SWITCH);
+
+	/*
+	 * WORKAROUND: There is SSPHY suspend bug due to
+	 * which USB enumerates
+	 * in HS mode instead of SS mode. Workaround it by asserting
+	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
+	 * mode
+	 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20);
+	if (ret)
+		return ret;
+
+	/*
+	 * Fix RX Equalization setting as follows
+	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
+	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1006, &data);
+	if (ret)
+		return ret;
+
+	data &= ~BIT(6);
+	data |= BIT(7);
+	data &= ~(0x7 << 8);
+	data |= (0x3 << 8);
+	data |= (1 << 11);
+	ret = regmap_write(priv->regmap_cr, 0x1006, data);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set EQ and TX launch amplitudes as follows
+	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
+	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
+	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+	 */
+	ret = regmap_read(priv->regmap_cr, 0x1002, &data);
+	if (ret)
+		return ret;
+
+	data &= ~0x3f80;
+	data |= (0x16 << 7);
+	data &= ~0x7f;
+	data |= (0x7f | BIT(14));
+	ret = regmap_write(priv->regmap_cr, 0x1002, data);
+	if (ret)
+		return ret;
+
+	/* MPLL_LOOP_CTL.PROP_CNTRL = 8 */
+	ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regmap, PHY_R2,
+			PHY_R2_PHY_TX_VBOOST_LVL,
+			FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));
+
+	regmap_update_bits(priv->regmap, PHY_R1,
+			PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
+			FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
+			FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return phy_g12a_usb3_init(phy);
+
+	/* Power UP PCIE */
+	/* TODO figure out when the bootloader has set USB3 mode before */
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_exit(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	return reset_control_reset(priv->reset);
+}
+
+static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev);
+	unsigned int mode;
+
+	if (args->args_count < 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	mode = args->args[0];
+
+	if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) {
+		dev_err(dev, "invalid phy mode select argument\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	priv->mode = mode;
+
+	return priv->phy;
+}
+
+static const struct phy_ops phy_g12a_usb3_pcie_ops = {
+	.init		= phy_g12a_usb3_pcie_init,
+	.exit		= phy_g12a_usb3_pcie_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_g12a_usb3_pcie_priv *priv;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, base,
+					     &phy_g12a_usb3_pcie_regmap_conf);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->regmap_cr = devm_regmap_init(dev, NULL, priv,
+					   &phy_g12a_usb3_pcie_cr_regmap_conf);
+	if (IS_ERR(priv->regmap_cr))
+		return PTR_ERR(priv->regmap_cr);
+
+	priv->clk_ref = devm_clk_get(dev, "ref_clk");
+	if (IS_ERR(priv->clk_ref))
+		return PTR_ERR(priv->clk_ref);
+
+	ret = clk_prepare_enable(priv->clk_ref);
+	if (ret)
+		goto err_disable_clk_ref;
+
+	priv->reset = devm_reset_control_array_get(dev, false, false);
+	if (IS_ERR(priv->reset))
+		return PTR_ERR(priv->reset);
+
+	priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
+	if (IS_ERR(priv->phy)) {
+		ret = PTR_ERR(priv->phy);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to create PHY\n");
+
+		return ret;
+	}
+
+	phy_set_drvdata(priv->phy, priv);
+	dev_set_drvdata(dev, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+						     phy_g12a_usb3_pcie_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+
+err_disable_clk_ref:
+	clk_disable_unprepare(priv->clk_ref);
+
+	return ret;
+}
+
+static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
+	{ .compatible = "amlogic,g12a-usb3-pcie-phy", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match);
+
+static struct platform_driver phy_g12a_usb3_pcie_driver = {
+	.probe	= phy_g12a_usb3_pcie_probe,
+	.driver	= {
+		.name		= "phy-g12a-usb3-pcie",
+		.of_match_table	= phy_g12a_usb3_pcie_of_match,
+	},
+};
+module_platform_driver(phy_g12a_usb3_pcie_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 148ef0bdb9c1..4cbee412f2b0 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -261,14 +261,9 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	priv->clk = devm_clk_get(dev, "phy");
-	if (IS_ERR(priv->clk)) {
-		ret = PTR_ERR(priv->clk);
-		if (ret == -ENOENT)
-			priv->clk = NULL;
-		else
-			return ret;
-	}
+	priv->clk = devm_clk_get_optional(dev, "phy");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
 
 	priv->reset = devm_reset_control_get_optional_shared(dev, "phy");
 	if (IS_ERR(priv->reset))
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index aa917a61071d..f30f4819c3bb 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -10,6 +10,17 @@ config PHY_CYGNUS_PCIE
 	  Enable this to support the Broadcom Cygnus PCIe PHY.
 	  If unsure, say N.
 
+config PHY_BCM_SR_USB
+	tristate "Broadcom Stingray USB PHY driver"
+	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
+	select GENERIC_PHY
+	default ARCH_BCM_IPROC
+	help
+	  Enable this to support the Broadcom Stingray USB PHY
+	  driver. It supports all versions of Superspeed and
+	  Highspeed PHYs.
+	  If unsure, say N.
+
 config BCM_KONA_USB2_PHY
 	tristate "Broadcom Kona USB2 PHY Driver"
 	depends on HAS_IOMEM
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
index 0f60184e6662..f453c7d3ffff 100644
--- a/drivers/phy/broadcom/Makefile
+++ b/drivers/phy/broadcom/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_BRCM_USB)		+= phy-brcm-usb-dvr.o
 phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
 
 obj-$(CONFIG_PHY_BCM_SR_PCIE)		+= phy-bcm-sr-pcie.o
+obj-$(CONFIG_PHY_BCM_SR_USB)		+= phy-bcm-sr-usb.o
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
new file mode 100644
index 000000000000..fe6c58910e4c
--- /dev/null
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Broadcom
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+enum bcm_usb_phy_version {
+	BCM_SR_USB_COMBO_PHY,
+	BCM_SR_USB_HS_PHY,
+};
+
+enum bcm_usb_phy_reg {
+	PLL_NDIV_FRAC,
+	PLL_NDIV_INT,
+	PLL_CTRL,
+	PHY_CTRL,
+	PHY_PLL_CTRL,
+};
+
+/* USB PHY registers */
+
+static const u8 bcm_usb_combo_phy_ss[] = {
+	[PLL_CTRL]		= 0x18,
+	[PHY_CTRL]		= 0x14,
+};
+
+static const u8 bcm_usb_combo_phy_hs[] = {
+	[PLL_NDIV_FRAC]	= 0x04,
+	[PLL_NDIV_INT]	= 0x08,
+	[PLL_CTRL]	= 0x0c,
+	[PHY_CTRL]	= 0x10,
+};
+
+#define HSPLL_NDIV_INT_VAL	0x13
+#define HSPLL_NDIV_FRAC_VAL	0x1005
+
+static const u8 bcm_usb_hs_phy[] = {
+	[PLL_NDIV_FRAC]	= 0x0,
+	[PLL_NDIV_INT]	= 0x4,
+	[PLL_CTRL]	= 0x8,
+	[PHY_CTRL]	= 0xc,
+};
+
+enum pll_ctrl_bits {
+	PLL_RESETB,
+	SSPLL_SUSPEND_EN,
+	PLL_SEQ_START,
+	PLL_LOCK,
+	PLL_PDIV,
+};
+
+static const u8 u3pll_ctrl[] = {
+	[PLL_RESETB]		= 0,
+	[SSPLL_SUSPEND_EN]	= 1,
+	[PLL_SEQ_START]		= 2,
+	[PLL_LOCK]		= 3,
+};
+
+#define HSPLL_PDIV_MASK		0xF
+#define HSPLL_PDIV_VAL		0x1
+
+static const u8 u2pll_ctrl[] = {
+	[PLL_PDIV]	= 1,
+	[PLL_RESETB]	= 5,
+	[PLL_LOCK]	= 6,
+};
+
+enum bcm_usb_phy_ctrl_bits {
+	CORERDY,
+	AFE_LDO_PWRDWNB,
+	AFE_PLL_PWRDWNB,
+	AFE_BG_PWRDWNB,
+	PHY_ISO,
+	PHY_RESETB,
+	PHY_PCTL,
+};
+
+#define PHY_PCTL_MASK	0xffff
+/*
+ * 0x0806 of PCTL_VAL has below bits set
+ * BIT-8 : refclk divider 1
+ * BIT-3:2: device mode; mode is not effect
+ * BIT-1: soft reset active low
+ */
+#define HSPHY_PCTL_VAL	0x0806
+#define SSPHY_PCTL_VAL	0x0006
+
+static const u8 u3phy_ctrl[] = {
+	[PHY_RESETB]	= 1,
+	[PHY_PCTL]	= 2,
+};
+
+static const u8 u2phy_ctrl[] = {
+	[CORERDY]		= 0,
+	[AFE_LDO_PWRDWNB]	= 1,
+	[AFE_PLL_PWRDWNB]	= 2,
+	[AFE_BG_PWRDWNB]	= 3,
+	[PHY_ISO]		= 4,
+	[PHY_RESETB]		= 5,
+	[PHY_PCTL]		= 6,
+};
+
+struct bcm_usb_phy_cfg {
+	uint32_t type;
+	uint32_t version;
+	void __iomem *regs;
+	struct phy *phy;
+	const u8 *offset;
+};
+
+#define PLL_LOCK_RETRY_COUNT	1000
+
+enum bcm_usb_phy_type {
+	USB_HS_PHY,
+	USB_SS_PHY,
+};
+
+#define NUM_BCM_SR_USB_COMBO_PHYS	2
+
+static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear)
+{
+	writel(readl(addr) & ~clear, addr);
+}
+
+static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set)
+{
+	writel(readl(addr) | set, addr);
+}
+
+static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit)
+{
+	int retry;
+	u32 rd_data;
+
+	retry = PLL_LOCK_RETRY_COUNT;
+	do {
+		rd_data = readl(addr);
+		if (rd_data & bit)
+			return 0;
+		udelay(1);
+	} while (--retry > 0);
+
+	pr_err("%s: FAIL\n", __func__);
+	return -ETIMEDOUT;
+}
+
+static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
+{
+	int ret = 0;
+	void __iomem *regs = phy_cfg->regs;
+	const u8 *offset;
+	u32 rd_data;
+
+	offset = phy_cfg->offset;
+
+	/* Set pctl with mode and soft reset */
+	rd_data = readl(regs + offset[PHY_CTRL]);
+	rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]);
+	rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]);
+	writel(rd_data, regs + offset[PHY_CTRL]);
+
+	bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL],
+			      BIT(u3pll_ctrl[SSPLL_SUSPEND_EN]));
+	bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
+			      BIT(u3pll_ctrl[PLL_SEQ_START]));
+	bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
+			      BIT(u3pll_ctrl[PLL_RESETB]));
+
+	/* Maximum timeout for PLL reset done */
+	msleep(30);
+
+	ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
+				     BIT(u3pll_ctrl[PLL_LOCK]));
+
+	return ret;
+}
+
+static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
+{
+	int ret = 0;
+	void __iomem *regs = phy_cfg->regs;
+	const u8 *offset;
+	u32 rd_data;
+
+	offset = phy_cfg->offset;
+
+	writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]);
+	writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]);
+
+	rd_data = readl(regs + offset[PLL_CTRL]);
+	rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]);
+	rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]);
+	writel(rd_data, regs + offset[PLL_CTRL]);
+
+	/* Set Core Ready high */
+	bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
+			      BIT(u2phy_ctrl[CORERDY]));
+
+	/* Maximum timeout for Core Ready done */
+	msleep(30);
+
+	bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
+			      BIT(u2pll_ctrl[PLL_RESETB]));
+	bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
+			      BIT(u2phy_ctrl[PHY_RESETB]));
+
+
+	rd_data = readl(regs + offset[PHY_CTRL]);
+	rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]);
+	rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]);
+	writel(rd_data, regs + offset[PHY_CTRL]);
+
+	/* Maximum timeout for PLL reset done */
+	msleep(30);
+
+	ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
+				     BIT(u2pll_ctrl[PLL_LOCK]));
+
+	return ret;
+}
+
+static int bcm_usb_phy_reset(struct phy *phy)
+{
+	struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
+	void __iomem *regs = phy_cfg->regs;
+	const u8 *offset;
+
+	offset = phy_cfg->offset;
+
+	if (phy_cfg->type == USB_HS_PHY) {
+		bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL],
+				      BIT(u2phy_ctrl[CORERDY]));
+		bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
+				      BIT(u2phy_ctrl[CORERDY]));
+	}
+
+	return 0;
+}
+
+static int bcm_usb_phy_init(struct phy *phy)
+{
+	struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
+	int ret = -EINVAL;
+
+	if (phy_cfg->type == USB_SS_PHY)
+		ret = bcm_usb_ss_phy_init(phy_cfg);
+	else if (phy_cfg->type == USB_HS_PHY)
+		ret = bcm_usb_hs_phy_init(phy_cfg);
+
+	return ret;
+}
+
+static struct phy_ops sr_phy_ops = {
+	.init		= bcm_usb_phy_init,
+	.reset		= bcm_usb_phy_reset,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *bcm_usb_phy_xlate(struct device *dev,
+				     struct of_phandle_args *args)
+{
+	struct bcm_usb_phy_cfg *phy_cfg;
+	int phy_idx;
+
+	phy_cfg = dev_get_drvdata(dev);
+	if (!phy_cfg)
+		return ERR_PTR(-EINVAL);
+
+	if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) {
+		phy_idx = args->args[0];
+
+		if (WARN_ON(phy_idx > 1))
+			return ERR_PTR(-ENODEV);
+
+		return phy_cfg[phy_idx].phy;
+	} else
+		return phy_cfg->phy;
+}
+
+static int bcm_usb_phy_create(struct device *dev, struct device_node *node,
+			      void __iomem *regs, uint32_t version)
+{
+	struct bcm_usb_phy_cfg *phy_cfg;
+	int idx;
+
+	if (version == BCM_SR_USB_COMBO_PHY) {
+		phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS *
+				       sizeof(struct bcm_usb_phy_cfg),
+				       GFP_KERNEL);
+		if (!phy_cfg)
+			return -ENOMEM;
+
+		for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) {
+			phy_cfg[idx].regs = regs;
+			phy_cfg[idx].version = version;
+			if (idx == 0) {
+				phy_cfg[idx].offset = bcm_usb_combo_phy_hs;
+				phy_cfg[idx].type = USB_HS_PHY;
+			} else {
+				phy_cfg[idx].offset = bcm_usb_combo_phy_ss;
+				phy_cfg[idx].type = USB_SS_PHY;
+			}
+			phy_cfg[idx].phy = devm_phy_create(dev, node,
+							   &sr_phy_ops);
+			if (IS_ERR(phy_cfg[idx].phy))
+				return PTR_ERR(phy_cfg[idx].phy);
+
+			phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]);
+		}
+	} else if (version == BCM_SR_USB_HS_PHY) {
+		phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg),
+				       GFP_KERNEL);
+		if (!phy_cfg)
+			return -ENOMEM;
+
+		phy_cfg->regs = regs;
+		phy_cfg->version = version;
+		phy_cfg->offset = bcm_usb_hs_phy;
+		phy_cfg->type = USB_HS_PHY;
+		phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops);
+		if (IS_ERR(phy_cfg->phy))
+			return PTR_ERR(phy_cfg->phy);
+
+		phy_set_drvdata(phy_cfg->phy, phy_cfg);
+	} else
+		return -ENODEV;
+
+	dev_set_drvdata(dev, phy_cfg);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_usb_phy_of_match[] = {
+	{
+		.compatible = "brcm,sr-usb-combo-phy",
+		.data = (void *)BCM_SR_USB_COMBO_PHY,
+	},
+	{
+		.compatible = "brcm,sr-usb-hs-phy",
+		.data = (void *)BCM_SR_USB_HS_PHY,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match);
+
+static int bcm_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node;
+	const struct of_device_id *of_id;
+	struct resource *res;
+	void __iomem *regs;
+	int ret;
+	enum bcm_usb_phy_version version;
+	struct phy_provider *phy_provider;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	of_id = of_match_node(bcm_usb_phy_of_match, dn);
+	if (of_id)
+		version = (enum bcm_usb_phy_version)of_id->data;
+	else
+		return -ENODEV;
+
+	ret = bcm_usb_phy_create(dev, dn, regs, version);
+	if (ret)
+		return ret;
+
+	phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_usb_phy_driver = {
+	.driver = {
+		.name = "phy-bcm-sr-usb",
+		.of_match_table = bcm_usb_phy_of_match,
+	},
+	.probe = bcm_usb_phy_probe,
+};
+module_platform_driver(bcm_usb_phy_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom stingray USB Phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index d6ea5ce8afa5..0c4833da7be0 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -6,6 +6,7 @@
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
@@ -24,6 +25,7 @@ struct imx8mq_usb_phy {
 	struct phy *phy;
 	struct clk *clk;
 	void __iomem *base;
+	struct regulator *vbus;
 };
 
 static int imx8mq_usb_phy_init(struct phy *phy)
@@ -55,6 +57,11 @@ static int imx8mq_usb_phy_init(struct phy *phy)
 static int imx8mq_phy_power_on(struct phy *phy)
 {
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regulator_enable(imx_phy->vbus);
+	if (ret)
+		return ret;
 
 	return clk_prepare_enable(imx_phy->clk);
 }
@@ -64,6 +71,7 @@ static int imx8mq_phy_power_off(struct phy *phy)
 	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(imx_phy->clk);
+	regulator_disable(imx_phy->vbus);
 
 	return 0;
 }
@@ -101,6 +109,10 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_phy->phy))
 		return PTR_ERR(imx_phy->phy);
 
+	imx_phy->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(imx_phy->vbus))
+		return PTR_ERR(imx_phy->vbus);
+
 	phy_set_drvdata(imx_phy->phy, imx_phy);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index b40ee54a1a50..3c142f08987c 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -12,6 +12,16 @@ config PHY_HI6220_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3660_USB
+	tristate "hi3660 USB PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI3660 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index f662a4fe18d8..75ba64e2faf8 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
new file mode 100644
index 000000000000..cc0af2c044d0
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ *		http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PERI_CRG_CLK_EN4			0x40
+#define PERI_CRG_CLK_DIS4			0x44
+#define GT_CLK_USB3OTG_REF			BIT(0)
+#define GT_ACLK_USB3OTG				BIT(1)
+
+#define PERI_CRG_RSTEN4				0x90
+#define PERI_CRG_RSTDIS4			0x94
+#define IP_RST_USB3OTGPHY_POR			BIT(3)
+#define IP_RST_USB3OTG				BIT(5)
+
+#define PERI_CRG_ISODIS				0x148
+#define USB_REFCLK_ISO_EN			BIT(25)
+
+#define PCTRL_PERI_CTRL3			0x10
+#define PCTRL_PERI_CTRL3_MSK_START		16
+#define USB_TCXO_EN				BIT(1)
+
+#define PCTRL_PERI_CTRL24			0x64
+#define SC_CLK_USB3PHY_3MUX1_SEL		BIT(25)
+
+#define USBOTG3_CTRL0				0x00
+#define SC_USB3PHY_ABB_GT_EN			BIT(15)
+
+#define USBOTG3_CTRL2				0x08
+#define USBOTG3CTRL2_POWERDOWN_HSP		BIT(0)
+#define USBOTG3CTRL2_POWERDOWN_SSP		BIT(1)
+
+#define USBOTG3_CTRL3				0x0C
+#define USBOTG3_CTRL3_VBUSVLDEXT		BIT(6)
+#define USBOTG3_CTRL3_VBUSVLDEXTSEL		BIT(5)
+
+#define USBOTG3_CTRL4				0x10
+
+#define USBOTG3_CTRL7				0x1c
+#define REF_SSP_EN				BIT(16)
+
+/* This value config the default txtune parameter of the usb 2.0 phy */
+#define HI3660_USB_DEFAULT_PHY_PARAM		0x1c466e3
+
+struct hi3660_priv {
+	struct device *dev;
+	struct regmap *peri_crg;
+	struct regmap *pctrl;
+	struct regmap *otg_bc;
+	u32 eye_diagram_param;
+};
+
+static int hi3660_phy_init(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val, mask;
+	int ret;
+
+	/* usb refclk iso disable */
+	ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
+	if (ret)
+		goto out;
+
+	/* enable usb_tcxo_en */
+	val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* enable phy ref clk */
+	val = SC_USB3PHY_ABB_GT_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
+	if (ret)
+		goto out;
+
+	val = REF_SSP_EN;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
+	if (ret)
+		goto out;
+
+	/* exit from IDDQ mode */
+	mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
+	if (ret)
+		goto out;
+
+	/* delay for exit from IDDQ mode */
+	usleep_range(100, 120);
+
+	/* deassert phy */
+	val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
+	if (ret)
+		goto out;
+
+	/* delay for phy deasserted */
+	usleep_range(10000, 15000);
+
+	/* fake vbus valid signal */
+	val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
+	mask = val;
+	ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
+	if (ret)
+		goto out;
+
+	/* delay for vbus valid */
+	usleep_range(100, 120);
+
+	ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
+			priv->eye_diagram_param);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi3660_phy_exit(struct phy *phy)
+{
+	struct hi3660_priv *priv = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	/* assert phy */
+	val = IP_RST_USB3OTGPHY_POR;
+	ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+	if (ret)
+		goto out;
+
+	/* disable usb_tcxo_en */
+	val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
+	ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+	return ret;
+}
+
+static struct phy_ops hi3660_phy_ops = {
+	.init		= hi3660_phy_init,
+	.exit		= hi3660_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int hi3660_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *phy;
+	struct hi3660_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pericrg-syscon");
+	if (IS_ERR(priv->peri_crg)) {
+		dev_err(dev, "no hisilicon,pericrg-syscon\n");
+		return PTR_ERR(priv->peri_crg);
+	}
+
+	priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,pctrl-syscon");
+	if (IS_ERR(priv->pctrl)) {
+		dev_err(dev, "no hisilicon,pctrl-syscon\n");
+		return PTR_ERR(priv->pctrl);
+	}
+
+	/* node of hi3660 phy is a sub-node of usb3_otg_bc */
+	priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(priv->otg_bc)) {
+		dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+		return PTR_ERR(priv->otg_bc);
+	}
+
+	if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+		&(priv->eye_diagram_param)))
+		priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
+
+	phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_phy_of_match[] = {
+	{.compatible = "hisilicon,hi3660-usb-phy",},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
+
+static struct platform_driver hi3660_phy_driver = {
+	.probe	= hi3660_phy_probe,
+	.driver = {
+		.name	= "hi3660-usb-phy",
+		.of_match_table	= hi3660_phy_of_match,
+	}
+};
+module_platform_driver(hi3660_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 8857d00b3c65..b5a89dbd3fe7 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -13,6 +13,16 @@ config PHY_MTK_TPHY
 	  multi-ports is first version, otherwise is second veriosn,
 	  so you can easily distinguish them by banks layout.
 
+config PHY_MTK_UFS
+	tristate "MediaTek UFS M-PHY driver"
+	depends on ARCH_MEDIATEK && OF
+	select GENERIC_PHY
+	help
+	  Support for UFS M-PHY on MediaTek chipsets.
+	  Enable this to provide vendor-specific probing,
+	  initialization, power on and power off flow of
+	  specified M-PHYs.
+
 config PHY_MTK_XSPHY
     tristate "MediaTek XS-PHY Driver"
     depends on ARCH_MEDIATEK && OF
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index ee49edc97ee9..08a8e6a97b1e 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -4,4 +4,5 @@
 #
 
 obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
+obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
 obj-$(CONFIG_PHY_MTK_XSPHY)		+= phy-mtk-xsphy.o
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 5b6a470ca145..cb2ed3b25068 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -1103,13 +1103,9 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 	}
 
 	/* it's deprecated, make it optional for backward compatibility */
-	tphy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
-	if (IS_ERR(tphy->u3phya_ref)) {
-		if (PTR_ERR(tphy->u3phya_ref) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		tphy->u3phya_ref = NULL;
-	}
+	tphy->u3phya_ref = devm_clk_get_optional(dev, "u3phya_ref");
+	if (IS_ERR(tphy->u3phya_ref))
+		return PTR_ERR(tphy->u3phya_ref);
 
 	tphy->src_ref_clk = U3P_REF_CLK;
 	tphy->src_coef = U3P_SLEW_RATE_COEF;
diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c
new file mode 100644
index 000000000000..cf94f5c35dc5
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-ufs.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Stanley Chu <stanley.chu@mediatek.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* mphy register and offsets */
+#define MP_GLB_DIG_8C               0x008C
+#define FRC_PLL_ISO_EN              BIT(8)
+#define PLL_ISO_EN                  BIT(9)
+#define FRC_FRC_PWR_ON              BIT(10)
+#define PLL_PWR_ON                  BIT(11)
+
+#define MP_LN_DIG_RX_9C             0xA09C
+#define FSM_DIFZ_FRC                BIT(18)
+
+#define MP_LN_DIG_RX_AC             0xA0AC
+#define FRC_RX_SQ_EN                BIT(0)
+#define RX_SQ_EN                    BIT(1)
+
+#define MP_LN_RX_44                 0xB044
+#define FRC_CDR_PWR_ON              BIT(17)
+#define CDR_PWR_ON                  BIT(18)
+#define FRC_CDR_ISO_EN              BIT(19)
+#define CDR_ISO_EN                  BIT(20)
+
+struct ufs_mtk_phy {
+	struct device *dev;
+	void __iomem *mmio;
+	struct clk *mp_clk;
+	struct clk *unipro_clk;
+};
+
+static inline u32 mphy_readl(struct ufs_mtk_phy *phy, u32 reg)
+{
+	return readl(phy->mmio + reg);
+}
+
+static inline void mphy_writel(struct ufs_mtk_phy *phy, u32 val, u32 reg)
+{
+	writel(val, phy->mmio + reg);
+}
+
+static void mphy_set_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit)
+{
+	u32 val;
+
+	val = mphy_readl(phy, reg);
+	val |= bit;
+	mphy_writel(phy, val, reg);
+}
+
+static void mphy_clr_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit)
+{
+	u32 val;
+
+	val = mphy_readl(phy, reg);
+	val &= ~bit;
+	mphy_writel(phy, val, reg);
+}
+
+static struct ufs_mtk_phy *get_ufs_mtk_phy(struct phy *generic_phy)
+{
+	return (struct ufs_mtk_phy *)phy_get_drvdata(generic_phy);
+}
+
+static int ufs_mtk_phy_clk_init(struct ufs_mtk_phy *phy)
+{
+	struct device *dev = phy->dev;
+
+	phy->unipro_clk = devm_clk_get(dev, "unipro");
+	if (IS_ERR(phy->unipro_clk)) {
+		dev_err(dev, "failed to get clock: unipro");
+		return PTR_ERR(phy->unipro_clk);
+	}
+
+	phy->mp_clk = devm_clk_get(dev, "mp");
+	if (IS_ERR(phy->mp_clk)) {
+		dev_err(dev, "failed to get clock: mp");
+		return PTR_ERR(phy->mp_clk);
+	}
+
+	return 0;
+}
+
+static void ufs_mtk_phy_set_active(struct ufs_mtk_phy *phy)
+{
+	/* release DA_MP_PLL_PWR_ON */
+	mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
+	mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
+
+	/* release DA_MP_PLL_ISO_EN */
+	mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
+	mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
+
+	/* release DA_MP_CDR_PWR_ON */
+	mphy_set_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
+	mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
+
+	/* release DA_MP_CDR_ISO_EN */
+	mphy_clr_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
+	mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
+
+	/* release DA_MP_RX0_SQ_EN */
+	mphy_set_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
+	mphy_clr_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
+
+	/* delay 1us to wait DIFZ stable */
+	udelay(1);
+
+	/* release DIFZ */
+	mphy_clr_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
+}
+
+static void ufs_mtk_phy_set_deep_hibern(struct ufs_mtk_phy *phy)
+{
+	/* force DIFZ */
+	mphy_set_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
+
+	/* force DA_MP_RX0_SQ_EN */
+	mphy_set_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
+	mphy_clr_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
+
+	/* force DA_MP_CDR_ISO_EN */
+	mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
+	mphy_set_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
+
+	/* force DA_MP_CDR_PWR_ON */
+	mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
+	mphy_clr_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
+
+	/* force DA_MP_PLL_ISO_EN */
+	mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
+	mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
+
+	/* force DA_MP_PLL_PWR_ON */
+	mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
+	mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
+}
+
+static int ufs_mtk_phy_power_on(struct phy *generic_phy)
+{
+	struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
+	int ret;
+
+	ret = clk_prepare_enable(phy->unipro_clk);
+	if (ret) {
+		dev_err(phy->dev, "unipro_clk enable failed %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_prepare_enable(phy->mp_clk);
+	if (ret) {
+		dev_err(phy->dev, "mp_clk enable failed %d\n", ret);
+		goto out_unprepare_unipro_clk;
+	}
+
+	ufs_mtk_phy_set_active(phy);
+
+	return 0;
+
+out_unprepare_unipro_clk:
+	clk_disable_unprepare(phy->unipro_clk);
+out:
+	return ret;
+}
+
+static int ufs_mtk_phy_power_off(struct phy *generic_phy)
+{
+	struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
+
+	ufs_mtk_phy_set_deep_hibern(phy);
+
+	clk_disable_unprepare(phy->unipro_clk);
+	clk_disable_unprepare(phy->mp_clk);
+
+	return 0;
+}
+
+static const struct phy_ops ufs_mtk_phy_ops = {
+	.power_on       = ufs_mtk_phy_power_on,
+	.power_off      = ufs_mtk_phy_power_off,
+	.owner          = THIS_MODULE,
+};
+
+static int ufs_mtk_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct ufs_mtk_phy *phy;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->mmio))
+		return PTR_ERR(phy->mmio);
+
+	phy->dev = dev;
+
+	ret = ufs_mtk_phy_clk_init(phy);
+	if (ret)
+		return ret;
+
+	generic_phy = devm_phy_create(dev, NULL, &ufs_mtk_phy_ops);
+	if (IS_ERR(generic_phy))
+		return PTR_ERR(generic_phy);
+
+	phy_set_drvdata(generic_phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id ufs_mtk_phy_of_match[] = {
+	{.compatible = "mediatek,mt8183-ufsphy"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ufs_mtk_phy_of_match);
+
+static struct platform_driver ufs_mtk_phy_driver = {
+	.probe = ufs_mtk_phy_probe,
+	.driver = {
+		.of_match_table = ufs_mtk_phy_of_match,
+		.name = "ufs_mtk_phy",
+	},
+};
+module_platform_driver(ufs_mtk_phy_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) MediaTek MPHY");
+MODULE_AUTHOR("Stanley Chu <stanley.chu@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
index 77c46f639fbf..76f596365176 100644
--- a/drivers/phy/mscc/phy-ocelot-serdes.c
+++ b/drivers/phy/mscc/phy-ocelot-serdes.c
@@ -31,6 +31,238 @@ struct serdes_macro {
 	struct serdes_ctrl	*ctrl;
 };
 
+#define MCB_S6G_CFG_TIMEOUT     50
+
+static int __serdes_write_mcb_s6g(struct regmap *regmap, u8 macro, u32 op)
+{
+	unsigned int regval = 0;
+
+	regmap_write(regmap, HSIO_MCB_S6G_ADDR_CFG, op |
+		     HSIO_MCB_S6G_ADDR_CFG_SERDES6G_ADDR(BIT(macro)));
+
+	return regmap_read_poll_timeout(regmap, HSIO_MCB_S6G_ADDR_CFG, regval,
+					(regval & op) != op, 100,
+					MCB_S6G_CFG_TIMEOUT * 1000);
+}
+
+static int serdes_commit_mcb_s6g(struct regmap *regmap, u8 macro)
+{
+	return __serdes_write_mcb_s6g(regmap, macro,
+		HSIO_MCB_S6G_ADDR_CFG_SERDES6G_WR_ONE_SHOT);
+}
+
+static int serdes_update_mcb_s6g(struct regmap *regmap, u8 macro)
+{
+	return __serdes_write_mcb_s6g(regmap, macro,
+		HSIO_MCB_S6G_ADDR_CFG_SERDES6G_RD_ONE_SHOT);
+}
+
+static int serdes_init_s6g(struct regmap *regmap, u8 serdes, int mode)
+{
+	u32 pll_fsm_ctrl_data;
+	u32 ob_ena1v_mode;
+	u32 des_bw_ana;
+	u32 ob_ena_cas;
+	u32 if_mode;
+	u32 ob_lev;
+	u32 qrate;
+	int ret;
+
+	if (mode == PHY_INTERFACE_MODE_QSGMII) {
+		pll_fsm_ctrl_data = 120;
+		ob_ena1v_mode = 0;
+		ob_ena_cas = 0;
+		des_bw_ana = 5;
+		ob_lev = 24;
+		if_mode = 3;
+		qrate = 0;
+	} else {
+		pll_fsm_ctrl_data = 60;
+		ob_ena1v_mode = 1;
+		ob_ena_cas = 2;
+		des_bw_ana = 3;
+		ob_lev = 48;
+		if_mode = 1;
+		qrate = 1;
+	}
+
+	ret = serdes_update_mcb_s6g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	/* Test pattern */
+
+	regmap_update_bits(regmap, HSIO_S6G_COMMON_CFG,
+			   HSIO_S6G_COMMON_CFG_SYS_RST, 0);
+
+	regmap_update_bits(regmap, HSIO_S6G_PLL_CFG,
+			   HSIO_S6G_PLL_CFG_PLL_FSM_ENA, 0);
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
+			   HSIO_S6G_IB_CFG_IB_SIG_DET_ENA |
+			   HSIO_S6G_IB_CFG_IB_REG_ENA |
+			   HSIO_S6G_IB_CFG_IB_SAM_ENA |
+			   HSIO_S6G_IB_CFG_IB_EQZ_ENA |
+			   HSIO_S6G_IB_CFG_IB_CONCUR |
+			   HSIO_S6G_IB_CFG_IB_CAL_ENA,
+			   HSIO_S6G_IB_CFG_IB_SIG_DET_ENA |
+			   HSIO_S6G_IB_CFG_IB_REG_ENA |
+			   HSIO_S6G_IB_CFG_IB_SAM_ENA |
+			   HSIO_S6G_IB_CFG_IB_EQZ_ENA |
+			   HSIO_S6G_IB_CFG_IB_CONCUR);
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG1,
+			   HSIO_S6G_IB_CFG1_IB_FRC_OFFSET |
+			   HSIO_S6G_IB_CFG1_IB_FRC_LP |
+			   HSIO_S6G_IB_CFG1_IB_FRC_MID |
+			   HSIO_S6G_IB_CFG1_IB_FRC_HP |
+			   HSIO_S6G_IB_CFG1_IB_FILT_OFFSET |
+			   HSIO_S6G_IB_CFG1_IB_FILT_LP |
+			   HSIO_S6G_IB_CFG1_IB_FILT_MID |
+			   HSIO_S6G_IB_CFG1_IB_FILT_HP,
+			   HSIO_S6G_IB_CFG1_IB_FILT_OFFSET |
+			   HSIO_S6G_IB_CFG1_IB_FILT_HP |
+			   HSIO_S6G_IB_CFG1_IB_FILT_LP |
+			   HSIO_S6G_IB_CFG1_IB_FILT_MID);
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG2,
+			   HSIO_S6G_IB_CFG2_IB_UREG_M,
+			   HSIO_S6G_IB_CFG2_IB_UREG(4));
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG3,
+			   HSIO_S6G_IB_CFG3_IB_INI_OFFSET_M |
+			   HSIO_S6G_IB_CFG3_IB_INI_LP_M |
+			   HSIO_S6G_IB_CFG3_IB_INI_MID_M |
+			   HSIO_S6G_IB_CFG3_IB_INI_HP_M,
+			   HSIO_S6G_IB_CFG3_IB_INI_OFFSET(31) |
+			   HSIO_S6G_IB_CFG3_IB_INI_LP(1) |
+			   HSIO_S6G_IB_CFG3_IB_INI_MID(31) |
+			   HSIO_S6G_IB_CFG3_IB_INI_HP(0));
+
+	regmap_update_bits(regmap, HSIO_S6G_MISC_CFG,
+			   HSIO_S6G_MISC_CFG_LANE_RST,
+			   HSIO_S6G_MISC_CFG_LANE_RST);
+
+	ret = serdes_commit_mcb_s6g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	/* OB + DES + IB + SER CFG */
+	regmap_update_bits(regmap, HSIO_S6G_OB_CFG,
+			   HSIO_S6G_OB_CFG_OB_IDLE |
+			   HSIO_S6G_OB_CFG_OB_ENA1V_MODE |
+			   HSIO_S6G_OB_CFG_OB_POST0_M |
+			   HSIO_S6G_OB_CFG_OB_PREC_M,
+			   (ob_ena1v_mode ? HSIO_S6G_OB_CFG_OB_ENA1V_MODE : 0) |
+			   HSIO_S6G_OB_CFG_OB_POST0(0) |
+			   HSIO_S6G_OB_CFG_OB_PREC(0));
+
+	regmap_update_bits(regmap, HSIO_S6G_OB_CFG1,
+			   HSIO_S6G_OB_CFG1_OB_ENA_CAS_M |
+			   HSIO_S6G_OB_CFG1_OB_LEV_M,
+			   HSIO_S6G_OB_CFG1_OB_LEV(ob_lev) |
+			   HSIO_S6G_OB_CFG1_OB_ENA_CAS(ob_ena_cas));
+
+	regmap_update_bits(regmap, HSIO_S6G_DES_CFG,
+			   HSIO_S6G_DES_CFG_DES_PHS_CTRL_M |
+			   HSIO_S6G_DES_CFG_DES_CPMD_SEL_M |
+			   HSIO_S6G_DES_CFG_DES_BW_ANA_M,
+			   HSIO_S6G_DES_CFG_DES_PHS_CTRL(2) |
+			   HSIO_S6G_DES_CFG_DES_CPMD_SEL(0) |
+			   HSIO_S6G_DES_CFG_DES_BW_ANA(des_bw_ana));
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
+			   HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL_M |
+			   HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET_M,
+			   HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET(0) |
+			   HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL(0));
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG1,
+			   HSIO_S6G_IB_CFG1_IB_TSDET_M,
+			   HSIO_S6G_IB_CFG1_IB_TSDET(16));
+
+	regmap_update_bits(regmap, HSIO_S6G_SER_CFG,
+			   HSIO_S6G_SER_CFG_SER_ALISEL_M |
+			   HSIO_S6G_SER_CFG_SER_ENALI,
+			   HSIO_S6G_SER_CFG_SER_ALISEL(0));
+
+	regmap_update_bits(regmap, HSIO_S6G_PLL_CFG,
+			   HSIO_S6G_PLL_CFG_PLL_DIV4 |
+			   HSIO_S6G_PLL_CFG_PLL_ENA_ROT |
+			   HSIO_S6G_PLL_CFG_PLL_FSM_CTRL_DATA_M |
+			   HSIO_S6G_PLL_CFG_PLL_ROT_DIR |
+			   HSIO_S6G_PLL_CFG_PLL_ROT_FRQ,
+			   HSIO_S6G_PLL_CFG_PLL_FSM_CTRL_DATA
+			   (pll_fsm_ctrl_data));
+
+	regmap_update_bits(regmap, HSIO_S6G_COMMON_CFG,
+			   HSIO_S6G_COMMON_CFG_SYS_RST |
+			   HSIO_S6G_COMMON_CFG_ENA_LANE |
+			   HSIO_S6G_COMMON_CFG_PWD_RX |
+			   HSIO_S6G_COMMON_CFG_PWD_TX |
+			   HSIO_S6G_COMMON_CFG_HRATE |
+			   HSIO_S6G_COMMON_CFG_QRATE |
+			   HSIO_S6G_COMMON_CFG_ENA_ELOOP |
+			   HSIO_S6G_COMMON_CFG_ENA_FLOOP |
+			   HSIO_S6G_COMMON_CFG_IF_MODE_M,
+			   HSIO_S6G_COMMON_CFG_SYS_RST |
+			   HSIO_S6G_COMMON_CFG_ENA_LANE |
+			   (qrate ? HSIO_S6G_COMMON_CFG_QRATE : 0) |
+			   HSIO_S6G_COMMON_CFG_IF_MODE(if_mode));
+
+	regmap_update_bits(regmap, HSIO_S6G_MISC_CFG,
+			   HSIO_S6G_MISC_CFG_LANE_RST |
+			   HSIO_S6G_MISC_CFG_DES_100FX_CPMD_ENA |
+			   HSIO_S6G_MISC_CFG_RX_LPI_MODE_ENA |
+			   HSIO_S6G_MISC_CFG_TX_LPI_MODE_ENA,
+			   HSIO_S6G_MISC_CFG_LANE_RST |
+			   HSIO_S6G_MISC_CFG_RX_LPI_MODE_ENA);
+
+
+	ret = serdes_commit_mcb_s6g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(regmap, HSIO_S6G_PLL_CFG,
+			   HSIO_S6G_PLL_CFG_PLL_FSM_ENA,
+			   HSIO_S6G_PLL_CFG_PLL_FSM_ENA);
+
+	ret = serdes_commit_mcb_s6g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	/* Wait for PLL bringup */
+	msleep(20);
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
+			   HSIO_S6G_IB_CFG_IB_CAL_ENA,
+			   HSIO_S6G_IB_CFG_IB_CAL_ENA);
+
+	regmap_update_bits(regmap, HSIO_S6G_MISC_CFG,
+			   HSIO_S6G_MISC_CFG_LANE_RST, 0);
+
+	ret = serdes_commit_mcb_s6g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	/* Wait for calibration */
+	msleep(60);
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG,
+			   HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET_M |
+			   HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL_M,
+			   HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET(0) |
+			   HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL(7));
+
+	regmap_update_bits(regmap, HSIO_S6G_IB_CFG1,
+			   HSIO_S6G_IB_CFG1_IB_TSDET_M,
+			   HSIO_S6G_IB_CFG1_IB_TSDET(3));
+
+	/* IB CFG */
+
+	return 0;
+}
+
 #define MCB_S1G_CFG_TIMEOUT     50
 
 static int __serdes_write_mcb_s1g(struct regmap *regmap, u8 macro, u32 op)
@@ -110,7 +342,7 @@ struct serdes_mux {
 	u32			mux;
 };
 
-#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) {		\
+#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \
 	.idx = _idx,						\
 	.port = _port,						\
 	.mode = _mode,						\
@@ -191,8 +423,12 @@ static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 
 		if (macro->idx <= SERDES1G_MAX)
 			return serdes_init_s1g(macro->ctrl->regs, macro->idx);
+		else if (macro->idx <= SERDES6G_MAX)
+			return serdes_init_s6g(macro->ctrl->regs,
+					       macro->idx - (SERDES1G_MAX + 1),
+					       ocelot_serdes_muxes[i].submode);
 
-		/* SERDES6G and PCIe not supported yet */
+		/* PCIe not supported yet */
 		return -EOPNOTSUPP;
 	}
 
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index cb38f6e8614c..c147ba843f0b 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -384,10 +384,16 @@ int phy_reset(struct phy *phy)
 	if (!phy || !phy->ops->reset)
 		return 0;
 
+	ret = phy_pm_runtime_get_sync(phy);
+	if (ret < 0 && ret != -ENOTSUPP)
+		return ret;
+
 	mutex_lock(&phy->mutex);
 	ret = phy->ops->reset(phy);
 	mutex_unlock(&phy->mutex);
 
+	phy_pm_runtime_put(phy);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(phy_reset);
@@ -564,6 +570,11 @@ void phy_put(struct phy *phy)
 	if (!phy || IS_ERR(phy))
 		return;
 
+	mutex_lock(&phy->mutex);
+	if (phy->ops->release)
+		phy->ops->release(phy);
+	mutex_unlock(&phy->mutex);
+
 	module_put(phy->ops->owner);
 	put_device(&phy->dev);
 }
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 08d6f6f7f039..cd91b4179b10 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -242,6 +242,88 @@ static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e),
 };
 
+static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40),
+};
+
+static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
+};
+
 static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -897,6 +979,7 @@ struct qmp_phy {
  * @init_count: phy common block initialization count
  * @phy_initialized: indicate if PHY has been initialized
  * @mode: current PHY mode
+ * @ufs_reset: optional UFS PHY reset handle
  */
 struct qcom_qmp {
 	struct device *dev;
@@ -914,6 +997,8 @@ struct qcom_qmp {
 	int init_count;
 	bool phy_initialized;
 	enum phy_mode mode;
+
+	struct reset_control *ufs_reset;
 };
 
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@@ -1146,6 +1231,31 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
 	.no_pcs_sw_reset	= true,
 };
 
+static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
+	.type			= PHY_TYPE_PCIE,
+	.nlanes			= 1,
+
+	.serdes_tbl		= msm8998_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(msm8998_pcie_serdes_tbl),
+	.tx_tbl			= msm8998_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(msm8998_pcie_tx_tbl),
+	.rx_tbl			= msm8998_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(msm8998_pcie_rx_tbl),
+	.pcs_tbl		= msm8998_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(msm8998_pcie_pcs_tbl),
+	.clk_list		= msm8996_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list		= ipq8074_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= pciephy_regs_layout,
+
+	.start_ctrl             = SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.mask_com_pcs_ready	= PCS_READY,
+};
+
 static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
 	.type                   = PHY_TYPE_USB3,
 	.nlanes                 = 1,
@@ -1314,6 +1424,7 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
 		return 0;
 	}
 
+	reset_control_assert(qmp->ufs_reset);
 	if (cfg->has_phy_com_ctrl) {
 		qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
 			     SERDES_START | PCS_START);
@@ -1335,8 +1446,7 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
 	return 0;
 }
 
-/* PHY Initialization */
-static int qcom_qmp_phy_init(struct phy *phy)
+static int qcom_qmp_phy_enable(struct phy *phy)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
@@ -1351,6 +1461,33 @@ static int qcom_qmp_phy_init(struct phy *phy)
 
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
 
+	if (cfg->no_pcs_sw_reset) {
+		/*
+		 * Get UFS reset, which is delayed until now to avoid a
+		 * circular dependency where UFS needs its PHY, but the PHY
+		 * needs this UFS reset.
+		 */
+		if (!qmp->ufs_reset) {
+			qmp->ufs_reset =
+				devm_reset_control_get_exclusive(qmp->dev,
+								 "ufsphy");
+
+			if (IS_ERR(qmp->ufs_reset)) {
+				ret = PTR_ERR(qmp->ufs_reset);
+				dev_err(qmp->dev,
+					"failed to get UFS reset: %d\n",
+					ret);
+
+				qmp->ufs_reset = NULL;
+				return ret;
+			}
+		}
+
+		ret = reset_control_assert(qmp->ufs_reset);
+		if (ret)
+			goto err_lane_rst;
+	}
+
 	ret = qcom_qmp_phy_com_init(qphy);
 	if (ret)
 		return ret;
@@ -1383,14 +1520,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
 				       cfg->rx_tbl, cfg->rx_tbl_num);
 
 	qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
-
-	/*
-	 * UFS PHY requires the deassert of software reset before serdes start.
-	 * For UFS PHYs that do not have software reset control bits, defer
-	 * starting serdes until the power on callback.
-	 */
-	if ((cfg->type == PHY_TYPE_UFS) && cfg->no_pcs_sw_reset)
-		goto out;
+	ret = reset_control_deassert(qmp->ufs_reset);
+	if (ret)
+		goto err_lane_rst;
 
 	/*
 	 * Pull out PHY from POWER DOWN state.
@@ -1403,7 +1535,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
 
 	/* Pull PHY out of reset state */
-	qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+	if (!cfg->no_pcs_sw_reset)
+		qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
 	if (cfg->has_phy_dp_com_ctrl)
 		qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
 
@@ -1420,11 +1554,10 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		goto err_pcs_ready;
 	}
 	qmp->phy_initialized = true;
-
-out:
-	return ret;
+	return 0;
 
 err_pcs_ready:
+	reset_control_assert(qmp->ufs_reset);
 	clk_disable_unprepare(qphy->pipe_clk);
 err_clk_enable:
 	if (cfg->has_lane_rst)
@@ -1435,7 +1568,7 @@ err_lane_rst:
 	return ret;
 }
 
-static int qcom_qmp_phy_exit(struct phy *phy)
+static int qcom_qmp_phy_disable(struct phy *phy)
 {
 	struct qmp_phy *qphy = phy_get_drvdata(phy);
 	struct qcom_qmp *qmp = qphy->qmp;
@@ -1463,44 +1596,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
 	return 0;
 }
 
-static int qcom_qmp_phy_poweron(struct phy *phy)
-{
-	struct qmp_phy *qphy = phy_get_drvdata(phy);
-	struct qcom_qmp *qmp = qphy->qmp;
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	void __iomem *pcs = qphy->pcs;
-	void __iomem *status;
-	unsigned int mask, val;
-	int ret = 0;
-
-	if (cfg->type != PHY_TYPE_UFS)
-		return 0;
-
-	/*
-	 * For UFS PHY that has not software reset control, serdes start
-	 * should only happen when UFS driver explicitly calls phy_power_on
-	 * after it deasserts software reset.
-	 */
-	if (cfg->no_pcs_sw_reset && !qmp->phy_initialized &&
-	    (qmp->init_count != 0)) {
-		/* start SerDes and Phy-Coding-Sublayer */
-		qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
-
-		status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
-		mask = cfg->mask_pcs_ready;
-
-		ret = readl_poll_timeout(status, val, !(val & mask), 1,
-					 PHY_INIT_COMPLETE_TIMEOUT);
-		if (ret) {
-			dev_err(qmp->dev, "phy initialization timed-out\n");
-			return ret;
-		}
-		qmp->phy_initialized = true;
-	}
-
-	return ret;
-}
-
 static int qcom_qmp_phy_set_mode(struct phy *phy,
 				 enum phy_mode mode, int submode)
 {
@@ -1750,9 +1845,15 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 }
 
 static const struct phy_ops qcom_qmp_phy_gen_ops = {
-	.init		= qcom_qmp_phy_init,
-	.exit		= qcom_qmp_phy_exit,
-	.power_on	= qcom_qmp_phy_poweron,
+	.init		= qcom_qmp_phy_enable,
+	.exit		= qcom_qmp_phy_disable,
+	.set_mode	= qcom_qmp_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static const struct phy_ops qcom_qmp_ufs_ops = {
+	.power_on	= qcom_qmp_phy_enable,
+	.power_off	= qcom_qmp_phy_disable,
 	.set_mode	= qcom_qmp_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
@@ -1763,6 +1864,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
 	struct phy *generic_phy;
 	struct qmp_phy *qphy;
+	const struct phy_ops *ops = &qcom_qmp_phy_gen_ops;
 	char prop_name[MAX_PROP_NAME];
 	int ret;
 
@@ -1849,7 +1951,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
 		}
 	}
 
-	generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops);
+	if (qmp->cfg->type == PHY_TYPE_UFS)
+		ops = &qcom_qmp_ufs_ops;
+
+	generic_phy = devm_phy_create(dev, np, ops);
 	if (IS_ERR(generic_phy)) {
 		ret = PTR_ERR(generic_phy);
 		dev_err(dev, "failed to create qphy %d\n", ret);
@@ -1873,6 +1978,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
 	}, {
+		.compatible = "qcom,msm8998-qmp-pcie-phy",
+		.data = &msm8998_pciephy_cfg,
+	}, {
 		.compatible = "qcom,msm8998-qmp-ufs-phy",
 		.data = &sdm845_ufsphy_cfg,
 	}, {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index a1b6cdee9a08..335ea5d7ef40 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -241,6 +241,7 @@
 #define QSERDES_V3_RX_RX_BAND				0x110
 #define QSERDES_V3_RX_RX_INTERFACE_MODE			0x11c
 #define QSERDES_V3_RX_RX_MODE_00			0x164
+#define QSERDES_V3_RX_RX_MODE_01			0x168
 
 /* Only for QMP V3 PHY - PCS registers */
 #define QPHY_V3_PCS_POWER_DOWN_CONTROL			0x004
@@ -280,6 +281,7 @@
 #define QPHY_V3_PCS_TSYNC_RSYNC_TIME			0x08c
 #define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
+#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
 #define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK		0x0b0
 #define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME		0x0b8
 #define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME		0x0bc
@@ -292,13 +294,23 @@
 #define QPHY_V3_PCS_RX_MIN_HIBERN8_TIME			0x138
 #define QPHY_V3_PCS_RX_SIGDET_CTRL1			0x13c
 #define QPHY_V3_PCS_RX_SIGDET_CTRL2			0x140
+#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1a8
+#define QPHY_V3_PCS_OSC_DTCT_ACTIONS			0x1ac
+#define QPHY_V3_PCS_SIGDET_CNTRL			0x1b0
 #define QPHY_V3_PCS_TX_MID_TERM_CTRL1			0x1bc
 #define QPHY_V3_PCS_MULTI_LANE_CTRL1			0x1c4
 #define QPHY_V3_PCS_RX_SIGDET_LVL			0x1d8
+#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
+#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1			0x20c
 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2			0x210
 
 /* Only for QMP V3 PHY - PCS_MISC registers */
 #define QPHY_V3_PCS_MISC_CLAMP_ENABLE			0x0c
+#define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2		0x2c
+#define QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1	0x44
+#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2		0x54
+#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4		0x5c
+#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5		0x60
 
 #endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 8fd7ce139772..1cbf1d6f28ce 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -822,14 +822,9 @@ static int qusb2_phy_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	qphy->iface_clk = devm_clk_get(dev, "iface");
-	if (IS_ERR(qphy->iface_clk)) {
-		ret = PTR_ERR(qphy->iface_clk);
-		if (ret == -EPROBE_DEFER)
-			return ret;
-		qphy->iface_clk = NULL;
-		dev_dbg(dev, "failed to get iface clk, %d\n", ret);
-	}
+	qphy->iface_clk = devm_clk_get_optional(dev, "iface");
+	if (IS_ERR(qphy->iface_clk))
+		return PTR_ERR(qphy->iface_clk);
 
 	qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0);
 	if (IS_ERR(qphy->phy_reset)) {
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index f798fb64de94..109ddd67be82 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -96,11 +97,10 @@ struct ufs_qcom_phy {
 	char name[UFS_QCOM_PHY_NAME_LEN];
 	struct ufs_qcom_phy_calibration *cached_regs;
 	int cached_regs_table_size;
-	bool is_powered_on;
-	bool is_started;
 	struct ufs_qcom_phy_specific_ops *phy_spec_ops;
 
 	enum phy_mode mode;
+	struct reset_control *ufs_reset;
 };
 
 /**
@@ -115,6 +115,7 @@ struct ufs_qcom_phy {
  * and writes to QSERDES_RX_SIGDET_CNTRL attribute
  */
 struct ufs_qcom_phy_specific_ops {
+	int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B);
 	void (*start_serdes)(struct ufs_qcom_phy *phy);
 	int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
 	void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index 1e0d4f2046a4..4815546f228c 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -42,28 +42,6 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
 }
 
-static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
-{
-	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-	bool is_rate_B = false;
-	int ret;
-
-	if (phy_common->mode == PHY_MODE_UFS_HS_B)
-		is_rate_B = true;
-
-	ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
-	if (!ret)
-		/* phy calibrated, but yet to be started */
-		phy_common->is_started = false;
-
-	return ret;
-}
-
-static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
-{
-	return 0;
-}
-
 static
 int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
 				   enum phy_mode mode, int submode)
@@ -124,8 +102,6 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
 }
 
 static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
-	.init		= ufs_qcom_phy_qmp_14nm_init,
-	.exit		= ufs_qcom_phy_qmp_14nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
 	.set_mode	= ufs_qcom_phy_qmp_14nm_set_mode,
@@ -133,6 +109,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
 };
 
 static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
+	.calibrate		= ufs_qcom_phy_qmp_14nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_14nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
index aef40f7a41d4..f1cf819e12ea 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
@@ -61,28 +61,6 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
 }
 
-static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
-{
-	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-	bool is_rate_B = false;
-	int ret;
-
-	if (phy_common->mode == PHY_MODE_UFS_HS_B)
-		is_rate_B = true;
-
-	ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
-	if (!ret)
-		/* phy calibrated, but yet to be started */
-		phy_common->is_started = false;
-
-	return ret;
-}
-
-static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
-{
-	return 0;
-}
-
 static
 int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy,
 				   enum phy_mode mode, int submode)
@@ -182,8 +160,6 @@ static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
 }
 
 static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
-	.init		= ufs_qcom_phy_qmp_20nm_init,
-	.exit		= ufs_qcom_phy_qmp_20nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
 	.set_mode	= ufs_qcom_phy_qmp_20nm_set_mode,
@@ -191,6 +167,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
 };
 
 static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
+	.calibrate		= ufs_qcom_phy_qmp_20nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_20nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
index f2979ccad00a..0a9f50f086b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
@@ -147,6 +147,21 @@ out:
 }
 EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe);
 
+static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common)
+{
+	struct reset_control *reset;
+
+	if (phy_common->ufs_reset)
+		return 0;
+
+	reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+
+	phy_common->ufs_reset = reset;
+	return 0;
+}
+
 static int __ufs_qcom_phy_clk_get(struct device *dev,
 			 const char *name, struct clk **clk_out, bool err_print)
 {
@@ -528,23 +543,38 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {
 	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
 	struct device *dev = phy_common->dev;
+	bool is_rate_B = false;
 	int err;
 
-	if (phy_common->is_powered_on)
-		return 0;
+	err = ufs_qcom_phy_get_reset(phy_common);
+	if (err)
+		return err;
 
-	if (!phy_common->is_started) {
-		err = ufs_qcom_phy_start_serdes(phy_common);
-		if (err)
-			return err;
+	err = reset_control_assert(phy_common->ufs_reset);
+	if (err)
+		return err;
 
-		err = ufs_qcom_phy_is_pcs_ready(phy_common);
-		if (err)
-			return err;
+	if (phy_common->mode == PHY_MODE_UFS_HS_B)
+		is_rate_B = true;
 
-		phy_common->is_started = true;
+	err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B);
+	if (err)
+		return err;
+
+	err = reset_control_deassert(phy_common->ufs_reset);
+	if (err) {
+		dev_err(dev, "Failed to assert UFS PHY reset");
+		return err;
 	}
 
+	err = ufs_qcom_phy_start_serdes(phy_common);
+	if (err)
+		return err;
+
+	err = ufs_qcom_phy_is_pcs_ready(phy_common);
+	if (err)
+		return err;
+
 	err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
 	if (err) {
 		dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
@@ -587,7 +617,6 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
 		}
 	}
 
-	phy_common->is_powered_on = true;
 	goto out;
 
 out_disable_ref_clk:
@@ -607,9 +636,6 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
 {
 	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
 
-	if (!phy_common->is_powered_on)
-		return 0;
-
 	phy_common->phy_spec_ops->power_control(phy_common, false);
 
 	if (phy_common->vddp_ref_clk.reg)
@@ -620,8 +646,7 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
 
 	ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
 	ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
-	phy_common->is_powered_on = false;
-
+	reset_control_assert(phy_common->ufs_reset);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
index e340a925bbb1..111bdcae775c 100644
--- a/drivers/phy/renesas/Kconfig
+++ b/drivers/phy/renesas/Kconfig
@@ -19,7 +19,7 @@ config PHY_RCAR_GEN3_PCIE
 config PHY_RCAR_GEN3_USB2
 	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
 	depends on ARCH_RENESAS
-	depends on EXTCON
+	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
 	depends on USB_SUPPORT
 	select GENERIC_PHY
 	select USB_COMMON
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
index 72eeb066912d..8dc5710d9c98 100644
--- a/drivers/phy/renesas/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -4,6 +4,7 @@
  *
  * Copyright (C) 2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2019 Renesas Electronics Corp.
  */
 
 #include <linux/clk.h>
@@ -15,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
+#include <linux/of_device.h>
 
 #define USBHS_LPSTS			0x02
 #define USBHS_UGCTRL			0x80
@@ -35,6 +37,8 @@
 #define USBHS_UGCTRL2_USB0SEL		0x00000030
 #define USBHS_UGCTRL2_USB0SEL_PCI	0x00000010
 #define USBHS_UGCTRL2_USB0SEL_HS_USB	0x00000030
+#define USBHS_UGCTRL2_USB0SEL_USB20	0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB20	0x00000020
 
 /* USB General status register (UGSTS) */
 #define USBHS_UGSTS_LOCK		0x00000100 /* From technical update */
@@ -64,6 +68,11 @@ struct rcar_gen2_phy_driver {
 	struct rcar_gen2_channel *channels;
 };
 
+struct rcar_gen2_phy_data {
+	const struct phy_ops *gen2_phy_ops;
+	const u32 (*select_value)[PHYS_PER_CHANNEL];
+};
+
 static int rcar_gen2_phy_init(struct phy *p)
 {
 	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
@@ -180,6 +189,60 @@ static int rcar_gen2_phy_power_off(struct phy *p)
 	return 0;
 }
 
+static int rz_g1c_phy_power_on(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Power on USBHS PHY */
+	value = readl(base + USBHS_UGCTRL);
+	value &= ~USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	/* As per the data sheet wait 340 micro sec for power stable */
+	udelay(340);
+
+	if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+		value = readw(base + USBHS_LPSTS);
+		value |= USBHS_LPSTS_SUSPM;
+		writew(value, base + USBHS_LPSTS);
+	}
+
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return 0;
+}
+
+static int rz_g1c_phy_power_off(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&drv->lock, flags);
+	/* Power off USBHS PHY */
+	if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+		value = readw(base + USBHS_LPSTS);
+		value &= ~USBHS_LPSTS_SUSPM;
+		writew(value, base + USBHS_LPSTS);
+	}
+
+	value = readl(base + USBHS_UGCTRL);
+	value |= USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return 0;
+}
+
 static const struct phy_ops rcar_gen2_phy_ops = {
 	.init		= rcar_gen2_phy_init,
 	.exit		= rcar_gen2_phy_exit,
@@ -188,12 +251,55 @@ static const struct phy_ops rcar_gen2_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct phy_ops rz_g1c_phy_ops = {
+	.init		= rcar_gen2_phy_init,
+	.exit		= rcar_gen2_phy_exit,
+	.power_on	= rz_g1c_phy_power_on,
+	.power_off	= rz_g1c_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const u32 pci_select_value[][PHYS_PER_CHANNEL] = {
+	[0]	= { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
+	[2]	= { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
+};
+
+static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = {
+	{ USBHS_UGCTRL2_USB0SEL_USB20, USBHS_UGCTRL2_USB0SEL_HS_USB20 },
+};
+
+static const struct rcar_gen2_phy_data rcar_gen2_usb_phy_data = {
+	.gen2_phy_ops = &rcar_gen2_phy_ops,
+	.select_value = pci_select_value,
+};
+
+static const struct rcar_gen2_phy_data rz_g1c_usb_phy_data = {
+	.gen2_phy_ops = &rz_g1c_phy_ops,
+	.select_value = usb20_select_value,
+};
+
 static const struct of_device_id rcar_gen2_phy_match_table[] = {
-	{ .compatible = "renesas,usb-phy-r8a7790" },
-	{ .compatible = "renesas,usb-phy-r8a7791" },
-	{ .compatible = "renesas,usb-phy-r8a7794" },
-	{ .compatible = "renesas,rcar-gen2-usb-phy" },
-	{ }
+	{
+		.compatible = "renesas,usb-phy-r8a77470",
+		.data = &rz_g1c_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,usb-phy-r8a7790",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,usb-phy-r8a7791",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,usb-phy-r8a7794",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-usb-phy",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
 
@@ -224,11 +330,6 @@ static const u32 select_mask[] = {
 	[2]	= USBHS_UGCTRL2_USB2SEL,
 };
 
-static const u32 select_value[][PHYS_PER_CHANNEL] = {
-	[0]	= { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
-	[2]	= { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
-};
-
 static int rcar_gen2_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -238,6 +339,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *base;
 	struct clk *clk;
+	const struct rcar_gen2_phy_data *data;
 	int i = 0;
 
 	if (!dev->of_node) {
@@ -266,6 +368,10 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 	drv->clk = clk;
 	drv->base = base;
 
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
 	drv->num_channels = of_get_child_count(dev->of_node);
 	drv->channels = devm_kcalloc(dev, drv->num_channels,
 				     sizeof(struct rcar_gen2_channel),
@@ -294,10 +400,10 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 
 			phy->channel = channel;
 			phy->number = n;
-			phy->select_value = select_value[channel_num][n];
+			phy->select_value = data->select_value[channel_num][n];
 
 			phy->phy = devm_phy_create(dev, NULL,
-						   &rcar_gen2_phy_ops);
+						   data->gen2_phy_ops);
 			if (IS_ERR(phy->phy)) {
 				dev_err(dev, "Failed to create PHY\n");
 				return PTR_ERR(phy->phy);
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 0a34782aaaa2..1322185a00a2 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -37,11 +37,8 @@
 
 /* INT_ENABLE */
 #define USB2_INT_ENABLE_UCOM_INTEN	BIT(3)
-#define USB2_INT_ENABLE_USBH_INTB_EN	BIT(2)
-#define USB2_INT_ENABLE_USBH_INTA_EN	BIT(1)
-#define USB2_INT_ENABLE_INIT		(USB2_INT_ENABLE_UCOM_INTEN | \
-					 USB2_INT_ENABLE_USBH_INTB_EN | \
-					 USB2_INT_ENABLE_USBH_INTA_EN)
+#define USB2_INT_ENABLE_USBH_INTB_EN	BIT(2)	/* For EHCI */
+#define USB2_INT_ENABLE_USBH_INTA_EN	BIT(1)	/* For OHCI */
 
 /* USBCTR */
 #define USB2_USBCTR_DIRPD	BIT(2)
@@ -78,10 +75,35 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
+#define NUM_OF_PHYS			4
+enum rcar_gen3_phy_index {
+	PHY_INDEX_BOTH_HC,
+	PHY_INDEX_OHCI,
+	PHY_INDEX_EHCI,
+	PHY_INDEX_HSUSB
+};
+
+static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = {
+	USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN,
+	USB2_INT_ENABLE_USBH_INTA_EN,
+	USB2_INT_ENABLE_USBH_INTB_EN,
+	0
+};
+
+struct rcar_gen3_phy {
+	struct phy *phy;
+	struct rcar_gen3_chan *ch;
+	u32 int_enable_bits;
+	bool initialized;
+	bool otg_initialized;
+	bool powered;
+};
+
 struct rcar_gen3_chan {
 	void __iomem *base;
+	struct device *dev;	/* platform_device's device */
 	struct extcon_dev *extcon;
-	struct phy *phy;
+	struct rcar_gen3_phy rphys[NUM_OF_PHYS];
 	struct regulator *vbus;
 	struct work_struct work;
 	enum usb_dr_mode dr_mode;
@@ -120,7 +142,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
 	void __iomem *usb2_base = ch->base;
 	u32 val = readl(usb2_base + USB2_COMMCTRL);
 
-	dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
+	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host);
 	if (host)
 		val &= ~USB2_COMMCTRL_OTG_PERI;
 	else
@@ -133,7 +155,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 	void __iomem *usb2_base = ch->base;
 	u32 val = readl(usb2_base + USB2_LINECTRL1);
 
-	dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
+	dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
 	val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
 	if (dp)
 		val |= USB2_LINECTRL1_DP_RPD;
@@ -147,7 +169,7 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 	void __iomem *usb2_base = ch->base;
 	u32 val = readl(usb2_base + USB2_ADPCTRL);
 
-	dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
+	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
 	if (vbus)
 		val |= USB2_ADPCTRL_DRVVBUS;
 	else
@@ -249,6 +271,42 @@ static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
 	return PHY_MODE_USB_DEVICE;
 }
 
+static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch)
+{
+	int i;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		if (ch->rphys[i].initialized)
+			return true;
+	}
+
+	return false;
+}
+
+static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch)
+{
+	int i;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		if (ch->rphys[i].otg_initialized)
+			return false;
+	}
+
+	return true;
+}
+
+static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch)
+{
+	int i;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		if (ch->rphys[i].powered)
+			return false;
+	}
+
+	return true;
+}
+
 static ssize_t role_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
 {
@@ -256,7 +314,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr,
 	bool is_b_device;
 	enum phy_mode cur_mode, new_mode;
 
-	if (!ch->is_otg_channel || !ch->phy->init_count)
+	if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
 		return -EIO;
 
 	if (!strncmp(buf, "host", strlen("host")))
@@ -294,7 +352,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
 {
 	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
 
-	if (!ch->is_otg_channel || !ch->phy->init_count)
+	if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
 		return -EIO;
 
 	return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
@@ -328,37 +386,62 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 
 static int rcar_gen3_phy_usb2_init(struct phy *p)
 {
-	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
+	u32 val;
 
 	/* Initialize USB2 part */
-	writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
+	val = readl(usb2_base + USB2_INT_ENABLE);
+	val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits;
+	writel(val, usb2_base + USB2_INT_ENABLE);
 	writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
 	writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
 
 	/* Initialize otg part */
-	if (channel->is_otg_channel)
-		rcar_gen3_init_otg(channel);
+	if (channel->is_otg_channel) {
+		if (rcar_gen3_needs_init_otg(channel))
+			rcar_gen3_init_otg(channel);
+		rphy->otg_initialized = true;
+	}
+
+	rphy->initialized = true;
 
 	return 0;
 }
 
 static int rcar_gen3_phy_usb2_exit(struct phy *p)
 {
-	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
+	void __iomem *usb2_base = channel->base;
+	u32 val;
+
+	rphy->initialized = false;
+
+	if (channel->is_otg_channel)
+		rphy->otg_initialized = false;
 
-	writel(0, channel->base + USB2_INT_ENABLE);
+	val = readl(usb2_base + USB2_INT_ENABLE);
+	val &= ~rphy->int_enable_bits;
+	if (!rcar_gen3_is_any_rphy_initialized(channel))
+		val &= ~USB2_INT_ENABLE_UCOM_INTEN;
+	writel(val, usb2_base + USB2_INT_ENABLE);
 
 	return 0;
 }
 
 static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 {
-	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
 	void __iomem *usb2_base = channel->base;
 	u32 val;
 	int ret;
 
+	if (!rcar_gen3_are_all_rphys_power_off(channel))
+		return 0;
+
 	if (channel->vbus) {
 		ret = regulator_enable(channel->vbus);
 		if (ret)
@@ -371,14 +454,22 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	val &= ~USB2_USBCTR_PLL_RST;
 	writel(val, usb2_base + USB2_USBCTR);
 
+	rphy->powered = true;
+
 	return 0;
 }
 
 static int rcar_gen3_phy_usb2_power_off(struct phy *p)
 {
-	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
 	int ret = 0;
 
+	rphy->powered = false;
+
+	if (!rcar_gen3_are_all_rphys_power_off(channel))
+		return 0;
+
 	if (channel->vbus)
 		ret = regulator_disable(channel->vbus);
 
@@ -393,6 +484,12 @@ static const struct phy_ops rcar_gen3_phy_usb2_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct phy_ops rz_g1c_phy_usb2_ops = {
+	.init		= rcar_gen3_phy_usb2_init,
+	.exit		= rcar_gen3_phy_usb2_exit,
+	.owner		= THIS_MODULE,
+};
+
 static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 {
 	struct rcar_gen3_chan *ch = _ch;
@@ -401,7 +498,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 	irqreturn_t ret = IRQ_NONE;
 
 	if (status & USB2_OBINT_BITS) {
-		dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
+		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
 		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
 		rcar_gen3_device_recognition(ch);
 		ret = IRQ_HANDLED;
@@ -411,11 +508,27 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 }
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
-	{ .compatible = "renesas,usb2-phy-r8a7795" },
-	{ .compatible = "renesas,usb2-phy-r8a7796" },
-	{ .compatible = "renesas,usb2-phy-r8a77965" },
-	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
-	{ }
+	{
+		.compatible = "renesas,usb2-phy-r8a77470",
+		.data = &rz_g1c_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a7795",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a7796",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a77965",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,rcar-gen3-usb2-phy",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
 
@@ -425,13 +538,54 @@ static const unsigned int rcar_gen3_phy_cable[] = {
 	EXTCON_NONE,
 };
 
+static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+	if (args->args_count == 0)	/* For old version dts */
+		return ch->rphys[PHY_INDEX_BOTH_HC].phy;
+	else if (args->args_count > 1)	/* Prevent invalid args count */
+		return ERR_PTR(-ENODEV);
+
+	if (args->args[0] >= NUM_OF_PHYS)
+		return ERR_PTR(-ENODEV);
+
+	return ch->rphys[args->args[0]].phy;
+}
+
+static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
+{
+	enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN;
+	int i;
+
+	/*
+	 * If one of device nodes has other dr_mode except UNKNOWN,
+	 * this function returns UNKNOWN. To achieve backward compatibility,
+	 * this loop starts the index as 0.
+	 */
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i);
+
+		if (mode != USB_DR_MODE_UNKNOWN) {
+			if (candidate == USB_DR_MODE_UNKNOWN)
+				candidate = mode;
+			else if (candidate != mode)
+				return USB_DR_MODE_UNKNOWN;
+		}
+	}
+
+	return candidate;
+}
+
 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rcar_gen3_chan *channel;
 	struct phy_provider *provider;
 	struct resource *res;
-	int irq, ret = 0;
+	const struct phy_ops *phy_usb2_ops;
+	int irq, ret = 0, i;
 
 	if (!dev->of_node) {
 		dev_err(dev, "This driver needs device tree\n");
@@ -457,7 +611,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 			dev_err(dev, "No irq handler (%d)\n", irq);
 	}
 
-	channel->dr_mode = of_usb_get_dr_mode_by_phy(dev->of_node, 0);
+	channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
 	if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
 		int ret;
 
@@ -481,11 +635,21 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	 * And then, phy-core will manage runtime pm for this device.
 	 */
 	pm_runtime_enable(dev);
-	channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
-	if (IS_ERR(channel->phy)) {
-		dev_err(dev, "Failed to create USB2 PHY\n");
-		ret = PTR_ERR(channel->phy);
-		goto error;
+	phy_usb2_ops = of_device_get_match_data(dev);
+	if (!phy_usb2_ops)
+		return -EINVAL;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		channel->rphys[i].phy = devm_phy_create(dev, NULL,
+							phy_usb2_ops);
+		if (IS_ERR(channel->rphys[i].phy)) {
+			dev_err(dev, "Failed to create USB2 PHY\n");
+			ret = PTR_ERR(channel->rphys[i].phy);
+			goto error;
+		}
+		channel->rphys[i].ch = channel;
+		channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i];
+		phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]);
 	}
 
 	channel->vbus = devm_regulator_get_optional(dev, "vbus");
@@ -498,9 +662,9 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, channel);
-	phy_set_drvdata(channel->phy, channel);
+	channel->dev = dev;
 
-	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
 	if (IS_ERR(provider)) {
 		dev_err(dev, "Failed to register PHY provider\n");
 		ret = PTR_ERR(provider);
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 19bf84f0bc67..b804c6bf4b55 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -87,6 +87,7 @@ struct rockchip_emmc_phy {
 	unsigned int	reg_offset;
 	struct regmap	*reg_base;
 	struct clk	*emmcclk;
+	unsigned int drive_impedance;
 };
 
 static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
@@ -281,10 +282,10 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
 {
 	struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
 
-	/* Drive impedance: 50 Ohm */
+	/* Drive impedance: from DTS */
 	regmap_write(rk_phy->reg_base,
 		     rk_phy->reg_offset + GRF_EMMCPHY_CON6,
-		     HIWORD_UPDATE(PHYCTRL_DR_50OHM,
+		     HIWORD_UPDATE(rk_phy->drive_impedance,
 				   PHYCTRL_DR_MASK,
 				   PHYCTRL_DR_SHIFT));
 
@@ -314,6 +315,26 @@ static const struct phy_ops ops = {
 	.owner		= THIS_MODULE,
 };
 
+static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm)
+{
+	switch (dr_ohm) {
+	case 100:
+		return PHYCTRL_DR_100OHM;
+	case 66:
+		return PHYCTRL_DR_66OHM;
+	case 50:
+		return PHYCTRL_DR_50OHM;
+	case 40:
+		return PHYCTRL_DR_40OHM;
+	case 33:
+		return PHYCTRL_DR_33OHM;
+	}
+
+	dev_warn(&pdev->dev, "Invalid value %u for drive-impedance-ohm.\n",
+		 dr_ohm);
+	return PHYCTRL_DR_50OHM;
+}
+
 static int rockchip_emmc_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -322,6 +343,7 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct regmap *grf;
 	unsigned int reg_offset;
+	u32 val;
 
 	if (!dev->parent || !dev->parent->of_node)
 		return -ENODEV;
@@ -344,6 +366,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
 
 	rk_phy->reg_offset = reg_offset;
 	rk_phy->reg_base = grf;
+	rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
+
+	if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
+		rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
 
 	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
 	if (IS_ERR(generic_phy)) {
diff --git a/drivers/phy/socionext/phy-uniphier-usb3hs.c b/drivers/phy/socionext/phy-uniphier-usb3hs.c
index b1b048be6166..50f379fc4e06 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3hs.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3hs.c
@@ -335,13 +335,9 @@ static int uniphier_u3hsphy_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->clk_parent))
 		return PTR_ERR(priv->clk_parent);
 
-	priv->clk_ext = devm_clk_get(dev, "phy-ext");
-	if (IS_ERR(priv->clk_ext)) {
-		if (PTR_ERR(priv->clk_ext) == -ENOENT)
-			priv->clk_ext = NULL;
-		else
-			return PTR_ERR(priv->clk_ext);
-	}
+	priv->clk_ext = devm_clk_get_optional(dev, "phy-ext");
+	if (IS_ERR(priv->clk_ext))
+		return PTR_ERR(priv->clk_ext);
 
 	priv->rst = devm_reset_control_get_shared(dev, "phy");
 	if (IS_ERR(priv->rst))
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 4be95679c7d8..ec231e40ef2a 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -238,13 +238,9 @@ static int uniphier_u3ssphy_probe(struct platform_device *pdev)
 		if (IS_ERR(priv->clk))
 			return PTR_ERR(priv->clk);
 
-		priv->clk_ext = devm_clk_get(dev, "phy-ext");
-		if (IS_ERR(priv->clk_ext)) {
-			if (PTR_ERR(priv->clk_ext) == -ENOENT)
-				priv->clk_ext = NULL;
-			else
-				return PTR_ERR(priv->clk_ext);
-		}
+		priv->clk_ext = devm_clk_get_optional(dev, "phy-ext");
+		if (IS_ERR(priv->clk_ext))
+			return PTR_ERR(priv->clk_ext);
 
 		priv->rst = devm_reset_control_get_shared(dev, "phy");
 		if (IS_ERR(priv->rst))
diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile
index 898589238fd9..a93cd9a499b2 100644
--- a/drivers/phy/tegra/Makefile
+++ b/drivers/phy/tegra/Makefile
@@ -4,3 +4,4 @@ phy-tegra-xusb-y += xusb.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o
 phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o
+phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
new file mode 100644
index 000000000000..6f3afaf9398f
--- /dev/null
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -0,0 +1,899 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2019, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "xusb.h"
+
+/* FUSE USB_CALIB registers */
+#define HS_CURR_LEVEL_PADX_SHIFT(x)	((x) ? (11 + (x - 1) * 6) : 0)
+#define HS_CURR_LEVEL_PAD_MASK		0x3f
+#define HS_TERM_RANGE_ADJ_SHIFT		7
+#define HS_TERM_RANGE_ADJ_MASK		0xf
+#define HS_SQUELCH_SHIFT		29
+#define HS_SQUELCH_MASK			0x7
+
+#define RPD_CTRL_SHIFT			0
+#define RPD_CTRL_MASK			0x1f
+
+/* XUSB PADCTL registers */
+#define XUSB_PADCTL_USB2_PAD_MUX	0x4
+#define  USB2_PORT_SHIFT(x)		((x) * 2)
+#define  USB2_PORT_MASK			0x3
+#define   PORT_XUSB			1
+#define  HSIC_PORT_SHIFT(x)		((x) + 20)
+#define  HSIC_PORT_MASK			0x1
+#define   PORT_HSIC			0
+
+#define XUSB_PADCTL_USB2_PORT_CAP	0x8
+#define XUSB_PADCTL_SS_PORT_CAP		0xc
+#define  PORTX_CAP_SHIFT(x)		((x) * 4)
+#define  PORT_CAP_MASK			0x3
+#define   PORT_CAP_DISABLED		0x0
+#define   PORT_CAP_HOST			0x1
+#define   PORT_CAP_DEVICE		0x2
+#define   PORT_CAP_OTG			0x3
+
+#define XUSB_PADCTL_ELPG_PROGRAM		0x20
+#define  USB2_PORT_WAKE_INTERRUPT_ENABLE(x)		BIT(x)
+#define  USB2_PORT_WAKEUP_EVENT(x)			BIT((x) +  7)
+#define  SS_PORT_WAKE_INTERRUPT_ENABLE(x)		BIT((x) + 14)
+#define  SS_PORT_WAKEUP_EVENT(x)			BIT((x) + 21)
+#define  USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x)	BIT((x) + 28)
+#define  USB2_HSIC_PORT_WAKEUP_EVENT(x)			BIT((x) + 30)
+#define  ALL_WAKE_EVENTS						\
+	(USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) |	\
+	USB2_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(0) |		\
+	SS_PORT_WAKEUP_EVENT(1) | SS_PORT_WAKEUP_EVENT(2) |		\
+	USB2_HSIC_PORT_WAKEUP_EVENT(0))
+
+#define XUSB_PADCTL_ELPG_PROGRAM_1		0x24
+#define  SSPX_ELPG_CLAMP_EN(x)			BIT(0 + (x) * 3)
+#define  SSPX_ELPG_CLAMP_EN_EARLY(x)		BIT(1 + (x) * 3)
+#define  SSPX_ELPG_VCORE_DOWN(x)		BIT(2 + (x) * 3)
+
+#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x)	(0x88 + (x) * 0x40)
+#define  HS_CURR_LEVEL(x)			((x) & 0x3f)
+#define  TERM_SEL				BIT(25)
+#define  USB2_OTG_PD				BIT(26)
+#define  USB2_OTG_PD2				BIT(27)
+#define  USB2_OTG_PD2_OVRD_EN			BIT(28)
+#define  USB2_OTG_PD_ZI				BIT(29)
+
+#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x)	(0x8c + (x) * 0x40)
+#define  USB2_OTG_PD_DR				BIT(2)
+#define  TERM_RANGE_ADJ(x)			(((x) & 0xf) << 3)
+#define  RPD_CTRL(x)				(((x) & 0x1f) << 26)
+
+#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0		0x284
+#define  BIAS_PAD_PD				BIT(11)
+#define  HS_SQUELCH_LEVEL(x)			(((x) & 0x7) << 0)
+
+#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1		0x288
+#define  USB2_TRK_START_TIMER(x)		(((x) & 0x7f) << 12)
+#define  USB2_TRK_DONE_RESET_TIMER(x)		(((x) & 0x7f) << 19)
+#define  USB2_PD_TRK				BIT(26)
+
+#define XUSB_PADCTL_HSIC_PADX_CTL0(x)		(0x300 + (x) * 0x20)
+#define  HSIC_PD_TX_DATA0			BIT(1)
+#define  HSIC_PD_TX_STROBE			BIT(3)
+#define  HSIC_PD_RX_DATA0			BIT(4)
+#define  HSIC_PD_RX_STROBE			BIT(6)
+#define  HSIC_PD_ZI_DATA0			BIT(7)
+#define  HSIC_PD_ZI_STROBE			BIT(9)
+#define  HSIC_RPD_DATA0				BIT(13)
+#define  HSIC_RPD_STROBE			BIT(15)
+#define  HSIC_RPU_DATA0				BIT(16)
+#define  HSIC_RPU_STROBE			BIT(18)
+
+#define XUSB_PADCTL_HSIC_PAD_TRK_CTL0		0x340
+#define  HSIC_TRK_START_TIMER(x)		(((x) & 0x7f) << 5)
+#define  HSIC_TRK_DONE_RESET_TIMER(x)		(((x) & 0x7f) << 12)
+#define  HSIC_PD_TRK				BIT(19)
+
+#define USB2_VBUS_ID				0x360
+#define  VBUS_OVERRIDE				BIT(14)
+#define  ID_OVERRIDE(x)				(((x) & 0xf) << 18)
+#define  ID_OVERRIDE_FLOATING			ID_OVERRIDE(8)
+#define  ID_OVERRIDE_GROUNDED			ID_OVERRIDE(0)
+
+#define TEGRA186_LANE(_name, _offset, _shift, _mask, _type)		\
+	{								\
+		.name = _name,						\
+		.offset = _offset,					\
+		.shift = _shift,					\
+		.mask = _mask,						\
+		.num_funcs = ARRAY_SIZE(tegra186_##_type##_functions),	\
+		.funcs = tegra186_##_type##_functions,			\
+	}
+
+struct tegra_xusb_fuse_calibration {
+	u32 *hs_curr_level;
+	u32 hs_squelch;
+	u32 hs_term_range_adj;
+	u32 rpd_ctrl;
+};
+
+struct tegra186_xusb_padctl {
+	struct tegra_xusb_padctl base;
+
+	struct tegra_xusb_fuse_calibration calib;
+
+	/* UTMI bias and tracking */
+	struct clk *usb2_trk_clk;
+	unsigned int bias_pad_enable;
+};
+
+static inline struct tegra186_xusb_padctl *
+to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl)
+{
+	return container_of(padctl, struct tegra186_xusb_padctl, base);
+}
+
+/* USB 2.0 UTMI PHY support */
+static struct tegra_xusb_lane *
+tegra186_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
+			 unsigned int index)
+{
+	struct tegra_xusb_usb2_lane *usb2;
+	int err;
+
+	usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
+	if (!usb2)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&usb2->base.list);
+	usb2->base.soc = &pad->soc->lanes[index];
+	usb2->base.index = index;
+	usb2->base.pad = pad;
+	usb2->base.np = np;
+
+	err = tegra_xusb_lane_parse_dt(&usb2->base, np);
+	if (err < 0) {
+		kfree(usb2);
+		return ERR_PTR(err);
+	}
+
+	return &usb2->base;
+}
+
+static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+
+	kfree(usb2);
+}
+
+static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = {
+	.probe = tegra186_usb2_lane_probe,
+	.remove = tegra186_usb2_lane_remove,
+};
+
+static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
+{
+	struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
+	struct device *dev = padctl->dev;
+	u32 value;
+	int err;
+
+	mutex_lock(&padctl->lock);
+
+	if (priv->bias_pad_enable++ > 0) {
+		mutex_unlock(&padctl->lock);
+		return;
+	}
+
+	err = clk_prepare_enable(priv->usb2_trk_clk);
+	if (err < 0)
+		dev_warn(dev, "failed to enable USB2 trk clock: %d\n", err);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~USB2_TRK_START_TIMER(~0);
+	value |= USB2_TRK_START_TIMER(0x1e);
+	value &= ~USB2_TRK_DONE_RESET_TIMER(~0);
+	value |= USB2_TRK_DONE_RESET_TIMER(0xa);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value &= ~BIAS_PAD_PD;
+	value &= ~HS_SQUELCH_LEVEL(~0);
+	value |= HS_SQUELCH_LEVEL(priv->calib.hs_squelch);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	udelay(1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~USB2_PD_TRK;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	mutex_unlock(&padctl->lock);
+}
+
+static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
+{
+	struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
+	u32 value;
+
+	mutex_lock(&padctl->lock);
+
+	if (WARN_ON(priv->bias_pad_enable == 0)) {
+		mutex_unlock(&padctl->lock);
+		return;
+	}
+
+	if (--priv->bias_pad_enable > 0) {
+		mutex_unlock(&padctl->lock);
+		return;
+	}
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value |= USB2_PD_TRK;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	clk_disable_unprepare(priv->usb2_trk_clk);
+
+	mutex_unlock(&padctl->lock);
+}
+
+static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_port *port;
+	struct device *dev = padctl->dev;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	port = tegra_xusb_find_usb2_port(padctl, index);
+	if (!port) {
+		dev_err(dev, "no port found for USB2 lane %u\n", index);
+		return;
+	}
+
+	tegra186_utmi_bias_pad_power_on(padctl);
+
+	udelay(2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~USB2_OTG_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value &= ~USB2_OTG_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+}
+
+static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value |= USB2_OTG_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value |= USB2_OTG_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	udelay(2);
+
+	tegra186_utmi_bias_pad_power_off(padctl);
+}
+
+static int tegra186_utmi_phy_power_on(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
+	struct tegra_xusb_usb2_port *port;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	port = tegra_xusb_find_usb2_port(padctl, index);
+	if (!port) {
+		dev_err(dev, "no port found for USB2 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
+	value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index));
+	value |= (PORT_XUSB << USB2_PORT_SHIFT(index));
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
+	value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
+
+	if (port->mode == USB_DR_MODE_UNKNOWN)
+		value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
+	else if (port->mode == USB_DR_MODE_PERIPHERAL)
+		value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
+	else if (port->mode == USB_DR_MODE_HOST)
+		value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
+	else if (port->mode == USB_DR_MODE_OTG)
+		value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
+
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~USB2_OTG_PD_ZI;
+	value |= TERM_SEL;
+	value &= ~HS_CURR_LEVEL(~0);
+
+	if (usb2->hs_curr_level_offset) {
+		int hs_current_level;
+
+		hs_current_level = (int)priv->calib.hs_curr_level[index] +
+						usb2->hs_curr_level_offset;
+
+		if (hs_current_level < 0)
+			hs_current_level = 0;
+		if (hs_current_level > 0x3f)
+			hs_current_level = 0x3f;
+
+		value |= HS_CURR_LEVEL(hs_current_level);
+	} else {
+		value |= HS_CURR_LEVEL(priv->calib.hs_curr_level[index]);
+	}
+
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value &= ~TERM_RANGE_ADJ(~0);
+	value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
+	value &= ~RPD_CTRL(~0);
+	value |= RPD_CTRL(priv->calib.rpd_ctrl);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	/* TODO: pad power saving */
+	tegra_phy_xusb_utmi_pad_power_on(phy);
+	return 0;
+}
+
+static int tegra186_utmi_phy_power_off(struct phy *phy)
+{
+	/* TODO: pad power saving */
+	tegra_phy_xusb_utmi_pad_power_down(phy);
+
+	return 0;
+}
+
+static int tegra186_utmi_phy_init(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_port *port;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	int err;
+
+	port = tegra_xusb_find_usb2_port(padctl, index);
+	if (!port) {
+		dev_err(dev, "no port found for USB2 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	if (port->supply && port->mode == USB_DR_MODE_HOST) {
+		err = regulator_enable(port->supply);
+		if (err) {
+			dev_err(dev, "failed to enable port %u VBUS: %d\n",
+				index, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int tegra186_utmi_phy_exit(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_port *port;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	int err;
+
+	port = tegra_xusb_find_usb2_port(padctl, index);
+	if (!port) {
+		dev_err(dev, "no port found for USB2 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	if (port->supply && port->mode == USB_DR_MODE_HOST) {
+		err = regulator_disable(port->supply);
+		if (err) {
+			dev_err(dev, "failed to disable port %u VBUS: %d\n",
+				index, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static const struct phy_ops utmi_phy_ops = {
+	.init = tegra186_utmi_phy_init,
+	.exit = tegra186_utmi_phy_exit,
+	.power_on = tegra186_utmi_phy_power_on,
+	.power_off = tegra186_utmi_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static struct tegra_xusb_pad *
+tegra186_usb2_pad_probe(struct tegra_xusb_padctl *padctl,
+			const struct tegra_xusb_pad_soc *soc,
+			struct device_node *np)
+{
+	struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
+	struct tegra_xusb_usb2_pad *usb2;
+	struct tegra_xusb_pad *pad;
+	int err;
+
+	usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
+	if (!usb2)
+		return ERR_PTR(-ENOMEM);
+
+	pad = &usb2->base;
+	pad->ops = &tegra186_usb2_lane_ops;
+	pad->soc = soc;
+
+	err = tegra_xusb_pad_init(pad, padctl, np);
+	if (err < 0) {
+		kfree(usb2);
+		goto out;
+	}
+
+	priv->usb2_trk_clk = devm_clk_get(&pad->dev, "trk");
+	if (IS_ERR(priv->usb2_trk_clk)) {
+		err = PTR_ERR(priv->usb2_trk_clk);
+		dev_dbg(&pad->dev, "failed to get usb2 trk clock: %d\n", err);
+		goto unregister;
+	}
+
+	err = tegra_xusb_pad_register(pad, &utmi_phy_ops);
+	if (err < 0)
+		goto unregister;
+
+	dev_set_drvdata(&pad->dev, pad);
+
+	return pad;
+
+unregister:
+	device_unregister(&pad->dev);
+out:
+	return ERR_PTR(err);
+}
+
+static void tegra186_usb2_pad_remove(struct tegra_xusb_pad *pad)
+{
+	struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
+
+	kfree(usb2);
+}
+
+static const struct tegra_xusb_pad_ops tegra186_usb2_pad_ops = {
+	.probe = tegra186_usb2_pad_probe,
+	.remove = tegra186_usb2_pad_remove,
+};
+
+static const char * const tegra186_usb2_functions[] = {
+	"xusb",
+};
+
+static const struct tegra_xusb_lane_soc tegra186_usb2_lanes[] = {
+	TEGRA186_LANE("usb2-0", 0,  0, 0, usb2),
+	TEGRA186_LANE("usb2-1", 0,  0, 0, usb2),
+	TEGRA186_LANE("usb2-2", 0,  0, 0, usb2),
+};
+
+static const struct tegra_xusb_pad_soc tegra186_usb2_pad = {
+	.name = "usb2",
+	.num_lanes = ARRAY_SIZE(tegra186_usb2_lanes),
+	.lanes = tegra186_usb2_lanes,
+	.ops = &tegra186_usb2_pad_ops,
+};
+
+static int tegra186_usb2_port_enable(struct tegra_xusb_port *port)
+{
+	return 0;
+}
+
+static void tegra186_usb2_port_disable(struct tegra_xusb_port *port)
+{
+}
+
+static struct tegra_xusb_lane *
+tegra186_usb2_port_map(struct tegra_xusb_port *port)
+{
+	return tegra_xusb_find_lane(port->padctl, "usb2", port->index);
+}
+
+static const struct tegra_xusb_port_ops tegra186_usb2_port_ops = {
+	.enable = tegra186_usb2_port_enable,
+	.disable = tegra186_usb2_port_disable,
+	.map = tegra186_usb2_port_map,
+};
+
+/* SuperSpeed PHY support */
+static struct tegra_xusb_lane *
+tegra186_usb3_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
+			 unsigned int index)
+{
+	struct tegra_xusb_usb3_lane *usb3;
+	int err;
+
+	usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&usb3->base.list);
+	usb3->base.soc = &pad->soc->lanes[index];
+	usb3->base.index = index;
+	usb3->base.pad = pad;
+	usb3->base.np = np;
+
+	err = tegra_xusb_lane_parse_dt(&usb3->base, np);
+	if (err < 0) {
+		kfree(usb3);
+		return ERR_PTR(err);
+	}
+
+	return &usb3->base;
+}
+
+static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_usb3_lane *usb3 = to_usb3_lane(lane);
+
+	kfree(usb3);
+}
+
+static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = {
+	.probe = tegra186_usb3_lane_probe,
+	.remove = tegra186_usb3_lane_remove,
+};
+static int tegra186_usb3_port_enable(struct tegra_xusb_port *port)
+{
+	return 0;
+}
+
+static void tegra186_usb3_port_disable(struct tegra_xusb_port *port)
+{
+}
+
+static struct tegra_xusb_lane *
+tegra186_usb3_port_map(struct tegra_xusb_port *port)
+{
+	return tegra_xusb_find_lane(port->padctl, "usb3", port->index);
+}
+
+static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = {
+	.enable = tegra186_usb3_port_enable,
+	.disable = tegra186_usb3_port_disable,
+	.map = tegra186_usb3_port_map,
+};
+
+static int tegra186_usb3_phy_power_on(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb3_port *port;
+	struct tegra_xusb_usb2_port *usb2;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	port = tegra_xusb_find_usb3_port(padctl, index);
+	if (!port) {
+		dev_err(dev, "no port found for USB3 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	usb2 = tegra_xusb_find_usb2_port(padctl, port->port);
+	if (!usb2) {
+		dev_err(dev, "no companion port found for USB3 lane %u\n",
+			index);
+		return -ENODEV;
+	}
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP);
+	value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
+
+	if (usb2->mode == USB_DR_MODE_UNKNOWN)
+		value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
+	else if (usb2->mode == USB_DR_MODE_PERIPHERAL)
+		value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
+	else if (usb2->mode == USB_DR_MODE_HOST)
+		value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
+	else if (usb2->mode == USB_DR_MODE_OTG)
+		value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
+
+	padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CAP);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
+	value &= ~SSPX_ELPG_VCORE_DOWN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
+	value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
+	value &= ~SSPX_ELPG_CLAMP_EN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra186_usb3_phy_power_off(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb3_port *port;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	port = tegra_xusb_find_usb3_port(padctl, index);
+	if (!port) {
+		dev_err(dev, "no port found for USB3 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
+	value |= SSPX_ELPG_CLAMP_EN_EARLY(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
+	value |= SSPX_ELPG_CLAMP_EN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
+
+	usleep_range(250, 350);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
+	value |= SSPX_ELPG_VCORE_DOWN(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra186_usb3_phy_init(struct phy *phy)
+{
+	return 0;
+}
+
+static int tegra186_usb3_phy_exit(struct phy *phy)
+{
+	return 0;
+}
+
+static const struct phy_ops usb3_phy_ops = {
+	.init = tegra186_usb3_phy_init,
+	.exit = tegra186_usb3_phy_exit,
+	.power_on = tegra186_usb3_phy_power_on,
+	.power_off = tegra186_usb3_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static struct tegra_xusb_pad *
+tegra186_usb3_pad_probe(struct tegra_xusb_padctl *padctl,
+			const struct tegra_xusb_pad_soc *soc,
+			struct device_node *np)
+{
+	struct tegra_xusb_usb3_pad *usb3;
+	struct tegra_xusb_pad *pad;
+	int err;
+
+	usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return ERR_PTR(-ENOMEM);
+
+	pad = &usb3->base;
+	pad->ops = &tegra186_usb3_lane_ops;
+	pad->soc = soc;
+
+	err = tegra_xusb_pad_init(pad, padctl, np);
+	if (err < 0) {
+		kfree(usb3);
+		goto out;
+	}
+
+	err = tegra_xusb_pad_register(pad, &usb3_phy_ops);
+	if (err < 0)
+		goto unregister;
+
+	dev_set_drvdata(&pad->dev, pad);
+
+	return pad;
+
+unregister:
+	device_unregister(&pad->dev);
+out:
+	return ERR_PTR(err);
+}
+
+static void tegra186_usb3_pad_remove(struct tegra_xusb_pad *pad)
+{
+	struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
+
+	kfree(usb2);
+}
+
+static const struct tegra_xusb_pad_ops tegra186_usb3_pad_ops = {
+	.probe = tegra186_usb3_pad_probe,
+	.remove = tegra186_usb3_pad_remove,
+};
+
+static const char * const tegra186_usb3_functions[] = {
+	"xusb",
+};
+
+static const struct tegra_xusb_lane_soc tegra186_usb3_lanes[] = {
+	TEGRA186_LANE("usb3-0", 0,  0, 0, usb3),
+	TEGRA186_LANE("usb3-1", 0,  0, 0, usb3),
+	TEGRA186_LANE("usb3-2", 0,  0, 0, usb3),
+};
+
+static const struct tegra_xusb_pad_soc tegra186_usb3_pad = {
+	.name = "usb3",
+	.num_lanes = ARRAY_SIZE(tegra186_usb3_lanes),
+	.lanes = tegra186_usb3_lanes,
+	.ops = &tegra186_usb3_pad_ops,
+};
+
+static const struct tegra_xusb_pad_soc * const tegra186_pads[] = {
+	&tegra186_usb2_pad,
+	&tegra186_usb3_pad,
+#if 0 /* TODO implement */
+	&tegra186_hsic_pad,
+#endif
+};
+
+static int
+tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
+{
+	struct device *dev = padctl->base.dev;
+	unsigned int i, count;
+	u32 value, *level;
+	int err;
+
+	count = padctl->base.soc->ports.usb2.count;
+
+	level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
+	if (!level)
+		return -ENOMEM;
+
+	err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
+	if (err) {
+		dev_err(dev, "failed to read calibration fuse: %d\n", err);
+		return err;
+	}
+
+	dev_dbg(dev, "FUSE_USB_CALIB_0 %#x\n", value);
+
+	for (i = 0; i < count; i++)
+		level[i] = (value >> HS_CURR_LEVEL_PADX_SHIFT(i)) &
+				HS_CURR_LEVEL_PAD_MASK;
+
+	padctl->calib.hs_curr_level = level;
+
+	padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
+					HS_SQUELCH_MASK;
+	padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
+						HS_TERM_RANGE_ADJ_MASK;
+
+	err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
+	if (err) {
+		dev_err(dev, "failed to read calibration fuse: %d\n", err);
+		return err;
+	}
+
+	dev_dbg(dev, "FUSE_USB_CALIB_EXT_0 %#x\n", value);
+
+	padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
+
+	return 0;
+}
+
+static struct tegra_xusb_padctl *
+tegra186_xusb_padctl_probe(struct device *dev,
+			   const struct tegra_xusb_padctl_soc *soc)
+{
+	struct tegra186_xusb_padctl *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	priv->base.dev = dev;
+	priv->base.soc = soc;
+
+	err = tegra186_xusb_read_fuse_calibration(priv);
+	if (err < 0)
+		return ERR_PTR(err);
+
+	return &priv->base;
+}
+
+static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
+{
+}
+
+static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
+	.probe = tegra186_xusb_padctl_probe,
+	.remove = tegra186_xusb_padctl_remove,
+};
+
+static const char * const tegra186_xusb_padctl_supply_names[] = {
+	"avdd-pll-erefeut",
+	"avdd-usb",
+	"vclamp-usb",
+	"vddio-hsic",
+};
+
+const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
+	.num_pads = ARRAY_SIZE(tegra186_pads),
+	.pads = tegra186_pads,
+	.ports = {
+		.usb2 = {
+			.ops = &tegra186_usb2_port_ops,
+			.count = 3,
+		},
+#if 0 /* TODO implement */
+		.hsic = {
+			.ops = &tegra186_hsic_port_ops,
+			.count = 1,
+		},
+#endif
+		.usb3 = {
+			.ops = &tegra186_usb3_port_ops,
+			.count = 3,
+		},
+	},
+	.ops = &tegra186_xusb_padctl_ops,
+	.supply_names = tegra186_xusb_padctl_supply_names,
+	.num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names),
+};
+EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
+
+MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB Pad Controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 5b3b8863363e..0417213ed68b 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -68,6 +68,12 @@ static const struct of_device_id tegra_xusb_padctl_of_match[] = {
 		.data = &tegra210_xusb_padctl_soc,
 	},
 #endif
+#if defined(CONFIG_ARCH_TEGRA_186_SOC)
+	{
+		.compatible = "nvidia,tegra186-xusb-padctl",
+		.data = &tegra186_xusb_padctl_soc,
+	},
+#endif
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match);
@@ -313,6 +319,10 @@ static void tegra_xusb_lane_program(struct tegra_xusb_lane *lane)
 	const struct tegra_xusb_lane_soc *soc = lane->soc;
 	u32 value;
 
+	/* skip single function lanes */
+	if (soc->num_funcs < 2)
+		return;
+
 	/* choose function */
 	value = padctl_readl(padctl, soc->offset);
 	value &= ~(soc->mask << soc->shift);
@@ -542,13 +552,34 @@ static void tegra_xusb_port_unregister(struct tegra_xusb_port *port)
 	device_unregister(&port->dev);
 }
 
+static const char *const modes[] = {
+	[USB_DR_MODE_UNKNOWN] = "",
+	[USB_DR_MODE_HOST] = "host",
+	[USB_DR_MODE_PERIPHERAL] = "peripheral",
+	[USB_DR_MODE_OTG] = "otg",
+};
+
 static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
 {
 	struct tegra_xusb_port *port = &usb2->base;
 	struct device_node *np = port->dev.of_node;
+	const char *mode;
 
 	usb2->internal = of_property_read_bool(np, "nvidia,internal");
 
+	if (!of_property_read_string(np, "mode", &mode)) {
+		int err = match_string(modes, ARRAY_SIZE(modes), mode);
+		if (err < 0) {
+			dev_err(&port->dev, "invalid value %s for \"mode\"\n",
+				mode);
+			usb2->mode = USB_DR_MODE_UNKNOWN;
+		} else {
+			usb2->mode = err;
+		}
+	} else {
+		usb2->mode = USB_DR_MODE_HOST;
+	}
+
 	usb2->supply = devm_regulator_get(&port->dev, "vbus");
 	return PTR_ERR_OR_ZERO(usb2->supply);
 }
@@ -839,6 +870,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 	struct tegra_xusb_padctl *padctl;
 	const struct of_device_id *match;
 	struct resource *res;
+	unsigned int i;
 	int err;
 
 	/* for backwards compatibility with old device trees */
@@ -876,14 +908,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 		goto remove;
 	}
 
+	padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies,
+					sizeof(*padctl->supplies), GFP_KERNEL);
+	if (!padctl->supplies) {
+		err = -ENOMEM;
+		goto remove;
+	}
+
+	for (i = 0; i < padctl->soc->num_supplies; i++)
+		padctl->supplies[i].supply = padctl->soc->supply_names[i];
+
+	err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
+				      padctl->supplies);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
+		goto remove;
+	}
+
 	err = reset_control_deassert(padctl->rst);
 	if (err < 0)
 		goto remove;
 
+	err = regulator_bulk_enable(padctl->soc->num_supplies,
+				    padctl->supplies);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable supplies: %d\n", err);
+		goto reset;
+	}
+
 	err = tegra_xusb_setup_pads(padctl);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to setup pads: %d\n", err);
-		goto reset;
+		goto power_down;
 	}
 
 	err = tegra_xusb_setup_ports(padctl);
@@ -896,6 +952,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 
 remove_pads:
 	tegra_xusb_remove_pads(padctl);
+power_down:
+	regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies);
 reset:
 	reset_control_assert(padctl->rst);
 remove:
@@ -911,6 +969,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
 	tegra_xusb_remove_ports(padctl);
 	tegra_xusb_remove_pads(padctl);
 
+	err = regulator_bulk_disable(padctl->soc->num_supplies,
+				     padctl->supplies);
+	if (err < 0)
+		dev_err(&pdev->dev, "failed to disable supplies: %d\n", err);
+
 	err = reset_control_assert(padctl->rst);
 	if (err < 0)
 		dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index b49dbc36efa3..e0028b9fe702 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -19,6 +19,8 @@
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 
+#include <linux/usb/otg.h>
+
 /* legacy entry points for backwards-compatibility */
 int tegra_xusb_padctl_legacy_probe(struct platform_device *pdev);
 int tegra_xusb_padctl_legacy_remove(struct platform_device *pdev);
@@ -54,10 +56,21 @@ struct tegra_xusb_lane {
 int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane,
 			     struct device_node *np);
 
+struct tegra_xusb_usb3_lane {
+	struct tegra_xusb_lane base;
+};
+
+static inline struct tegra_xusb_usb3_lane *
+to_usb3_lane(struct tegra_xusb_lane *lane)
+{
+	return container_of(lane, struct tegra_xusb_usb3_lane, base);
+}
+
 struct tegra_xusb_usb2_lane {
 	struct tegra_xusb_lane base;
 
 	u32 hs_curr_level_offset;
+	bool powered_on;
 };
 
 static inline struct tegra_xusb_usb2_lane *
@@ -168,6 +181,19 @@ int tegra_xusb_pad_register(struct tegra_xusb_pad *pad,
 			    const struct phy_ops *ops);
 void tegra_xusb_pad_unregister(struct tegra_xusb_pad *pad);
 
+struct tegra_xusb_usb3_pad {
+	struct tegra_xusb_pad base;
+
+	unsigned int enable;
+	struct mutex lock;
+};
+
+static inline struct tegra_xusb_usb3_pad *
+to_usb3_pad(struct tegra_xusb_pad *pad)
+{
+	return container_of(pad, struct tegra_xusb_usb3_pad, base);
+}
+
 struct tegra_xusb_usb2_pad {
 	struct tegra_xusb_pad base;
 
@@ -271,6 +297,7 @@ struct tegra_xusb_usb2_port {
 	struct tegra_xusb_port base;
 
 	struct regulator *supply;
+	enum usb_dr_mode mode;
 	bool internal;
 };
 
@@ -367,6 +394,9 @@ struct tegra_xusb_padctl_soc {
 	} ports;
 
 	const struct tegra_xusb_padctl_ops *ops;
+
+	const char * const *supply_names;
+	unsigned int num_supplies;
 };
 
 struct tegra_xusb_padctl {
@@ -390,6 +420,8 @@ struct tegra_xusb_padctl {
 	unsigned int enable;
 
 	struct clk *clk;
+
+	struct regulator_bulk_data *supplies;
 };
 
 static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,
@@ -417,5 +449,8 @@ extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc;
 #if defined(CONFIG_ARCH_TEGRA_210_SOC)
 extern const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc;
 #endif
+#if defined(CONFIG_ARCH_TEGRA_186_SOC)
+extern const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc;
+#endif
 
 #endif /* __PHY_TEGRA_XUSB_H */
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 103efc456a12..d658275f6164 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -20,6 +20,18 @@ config PHY_DM816X_USB
 	help
 	  Enable this for dm816x USB to work.
 
+config PHY_AM654_SERDES
+	tristate "TI AM654 SERDES support"
+	depends on OF && ARCH_K3 || COMPILE_TEST
+	depends on COMMON_CLK
+	select GENERIC_PHY
+	select MULTIPLEXER
+	select REGMAP_MMIO
+	select MUX_MMIO
+	help
+	  This option enables support for TI AM654 SerDes PHY used for
+	  PCIe.
+
 config OMAP_CONTROL_PHY
 	tristate "OMAP CONTROL PHY Driver"
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
index bea8f25a137a..bff901eb0ecc 100644
--- a/drivers/phy/ti/Makefile
+++ b/drivers/phy/ti/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
+obj-$(CONFIG_PHY_AM654_SERDES)		+= phy-am654-serdes.o
 obj-$(CONFIG_PHY_TI_GMII_SEL)		+= phy-gmii-sel.o
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
new file mode 100644
index 000000000000..d3769200cb9b
--- /dev/null
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * PCIe SERDES driver for AM654x SoC
+ *
+ * Copyright (C) 2018 - 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#define CMU_R07C		0x7c
+
+#define COMLANE_R138		0xb38
+#define VERSION			0x70
+
+#define COMLANE_R190		0xb90
+
+#define COMLANE_R194		0xb94
+
+#define SERDES_CTRL		0x1fd0
+
+#define WIZ_LANEXCTL_STS	0x1fe0
+#define TX0_DISABLE_STATE	0x4
+#define TX0_SLEEP_STATE		0x5
+#define TX0_SNOOZE_STATE	0x6
+#define TX0_ENABLE_STATE	0x7
+
+#define RX0_DISABLE_STATE	0x4
+#define RX0_SLEEP_STATE		0x5
+#define RX0_SNOOZE_STATE	0x6
+#define RX0_ENABLE_STATE	0x7
+
+#define WIZ_PLL_CTRL		0x1ff4
+#define PLL_DISABLE_STATE	0x4
+#define PLL_SLEEP_STATE		0x5
+#define PLL_SNOOZE_STATE	0x6
+#define PLL_ENABLE_STATE	0x7
+
+#define PLL_LOCK_TIME		100000	/* in microseconds */
+#define SLEEP_TIME		100	/* in microseconds */
+
+#define LANE_USB3		0x0
+#define LANE_PCIE0_LANE0	0x1
+
+#define LANE_PCIE1_LANE0	0x0
+#define LANE_PCIE0_LANE1	0x1
+
+#define SERDES_NUM_CLOCKS	3
+
+#define AM654_SERDES_CTRL_CLKSEL_MASK	GENMASK(7, 4)
+#define AM654_SERDES_CTRL_CLKSEL_SHIFT	4
+
+struct serdes_am654_clk_mux {
+	struct clk_hw	hw;
+	struct regmap	*regmap;
+	unsigned int	reg;
+	int		clk_id;
+	struct clk_init_data clk_data;
+};
+
+#define to_serdes_am654_clk_mux(_hw)	\
+		container_of(_hw, struct serdes_am654_clk_mux, hw)
+
+static struct regmap_config serdes_am654_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+};
+
+static const struct reg_field cmu_master_cdn_o = REG_FIELD(CMU_R07C, 24, 24);
+static const struct reg_field config_version = REG_FIELD(COMLANE_R138, 16, 23);
+static const struct reg_field l1_master_cdn_o = REG_FIELD(COMLANE_R190, 9, 9);
+static const struct reg_field cmu_ok_i_0 = REG_FIELD(COMLANE_R194, 19, 19);
+static const struct reg_field por_en = REG_FIELD(SERDES_CTRL, 29, 29);
+static const struct reg_field tx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31);
+static const struct reg_field rx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15);
+static const struct reg_field pll_enable = REG_FIELD(WIZ_PLL_CTRL, 29, 31);
+static const struct reg_field pll_ok = REG_FIELD(WIZ_PLL_CTRL, 28, 28);
+
+struct serdes_am654 {
+	struct regmap		*regmap;
+	struct regmap_field	*cmu_master_cdn_o;
+	struct regmap_field	*config_version;
+	struct regmap_field	*l1_master_cdn_o;
+	struct regmap_field	*cmu_ok_i_0;
+	struct regmap_field	*por_en;
+	struct regmap_field	*tx0_enable;
+	struct regmap_field	*rx0_enable;
+	struct regmap_field	*pll_enable;
+	struct regmap_field	*pll_ok;
+
+	struct device		*dev;
+	struct mux_control	*control;
+	bool			busy;
+	u32			type;
+	struct device_node	*of_node;
+	struct clk_onecell_data	clk_data;
+	struct clk		*clks[SERDES_NUM_CLOCKS];
+};
+
+static int serdes_am654_enable_pll(struct serdes_am654 *phy)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_field_write(phy->pll_enable, PLL_ENABLE_STATE);
+	if (ret)
+		return ret;
+
+	return regmap_field_read_poll_timeout(phy->pll_ok, val, val, 1000,
+					      PLL_LOCK_TIME);
+}
+
+static void serdes_am654_disable_pll(struct serdes_am654 *phy)
+{
+	struct device *dev = phy->dev;
+	int ret;
+
+	ret = regmap_field_write(phy->pll_enable, PLL_DISABLE_STATE);
+	if (ret)
+		dev_err(dev, "Failed to disable PLL\n");
+}
+
+static int serdes_am654_enable_txrx(struct serdes_am654 *phy)
+{
+	int ret;
+
+	/* Enable TX */
+	ret = regmap_field_write(phy->tx0_enable, TX0_ENABLE_STATE);
+	if (ret)
+		return ret;
+
+	/* Enable RX */
+	ret = regmap_field_write(phy->rx0_enable, RX0_ENABLE_STATE);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int serdes_am654_disable_txrx(struct serdes_am654 *phy)
+{
+	int ret;
+
+	/* Disable TX */
+	ret = regmap_field_write(phy->tx0_enable, TX0_DISABLE_STATE);
+	if (ret)
+		return ret;
+
+	/* Disable RX */
+	ret = regmap_field_write(phy->rx0_enable, RX0_DISABLE_STATE);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int serdes_am654_power_on(struct phy *x)
+{
+	struct serdes_am654 *phy = phy_get_drvdata(x);
+	struct device *dev = phy->dev;
+	int ret;
+	u32 val;
+
+	ret = serdes_am654_enable_pll(phy);
+	if (ret) {
+		dev_err(dev, "Failed to enable PLL\n");
+		return ret;
+	}
+
+	ret = serdes_am654_enable_txrx(phy);
+	if (ret) {
+		dev_err(dev, "Failed to enable TX RX\n");
+		return ret;
+	}
+
+	return regmap_field_read_poll_timeout(phy->cmu_ok_i_0, val, val,
+					      SLEEP_TIME, PLL_LOCK_TIME);
+}
+
+static int serdes_am654_power_off(struct phy *x)
+{
+	struct serdes_am654 *phy = phy_get_drvdata(x);
+
+	serdes_am654_disable_txrx(phy);
+	serdes_am654_disable_pll(phy);
+
+	return 0;
+}
+
+static int serdes_am654_init(struct phy *x)
+{
+	struct serdes_am654 *phy = phy_get_drvdata(x);
+	int ret;
+
+	ret = regmap_field_write(phy->config_version, VERSION);
+	if (ret)
+		return ret;
+
+	ret = regmap_field_write(phy->cmu_master_cdn_o, 0x1);
+	if (ret)
+		return ret;
+
+	ret = regmap_field_write(phy->l1_master_cdn_o, 0x1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int serdes_am654_reset(struct phy *x)
+{
+	struct serdes_am654 *phy = phy_get_drvdata(x);
+	int ret;
+
+	ret = regmap_field_write(phy->por_en, 0x1);
+	if (ret)
+		return ret;
+
+	mdelay(1);
+
+	ret = regmap_field_write(phy->por_en, 0x0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void serdes_am654_release(struct phy *x)
+{
+	struct serdes_am654 *phy = phy_get_drvdata(x);
+
+	phy->type = PHY_NONE;
+	phy->busy = false;
+	mux_control_deselect(phy->control);
+}
+
+struct phy *serdes_am654_xlate(struct device *dev, struct of_phandle_args
+				 *args)
+{
+	struct serdes_am654 *am654_phy;
+	struct phy *phy;
+	int ret;
+
+	phy = of_phy_simple_xlate(dev, args);
+	if (IS_ERR(phy))
+		return phy;
+
+	am654_phy = phy_get_drvdata(phy);
+	if (am654_phy->busy)
+		return ERR_PTR(-EBUSY);
+
+	ret = mux_control_select(am654_phy->control, args->args[1]);
+	if (ret) {
+		dev_err(dev, "Failed to select SERDES Lane Function\n");
+		return ERR_PTR(ret);
+	}
+
+	am654_phy->busy = true;
+	am654_phy->type = args->args[0];
+
+	return phy;
+}
+
+static const struct phy_ops ops = {
+	.reset		= serdes_am654_reset,
+	.init		= serdes_am654_init,
+	.power_on	= serdes_am654_power_on,
+	.power_off	= serdes_am654_power_off,
+	.release	= serdes_am654_release,
+	.owner		= THIS_MODULE,
+};
+
+#define SERDES_NUM_MUX_COMBINATIONS 16
+
+#define LICLK 0
+#define EXT_REFCLK 1
+#define RICLK 2
+
+static const int
+serdes_am654_mux_table[SERDES_NUM_MUX_COMBINATIONS][SERDES_NUM_CLOCKS] = {
+	/*
+	 * Each combination maps to one of
+	 * "Figure 12-1986. SerDes Reference Clock Distribution"
+	 * in TRM.
+	 */
+	 /* Parent of CMU refclk, Left output, Right output
+	  * either of EXT_REFCLK, LICLK, RICLK
+	  */
+	{ EXT_REFCLK, EXT_REFCLK, EXT_REFCLK },	/* 0000 */
+	{ RICLK, EXT_REFCLK, EXT_REFCLK },	/* 0001 */
+	{ EXT_REFCLK, RICLK, LICLK },		/* 0010 */
+	{ RICLK, RICLK, EXT_REFCLK },		/* 0011 */
+	{ LICLK, EXT_REFCLK, EXT_REFCLK },	/* 0100 */
+	{ EXT_REFCLK, EXT_REFCLK, EXT_REFCLK },	/* 0101 */
+	{ LICLK, RICLK, LICLK },		/* 0110 */
+	{ EXT_REFCLK, RICLK, LICLK },		/* 0111 */
+	{ EXT_REFCLK, EXT_REFCLK, LICLK },	/* 1000 */
+	{ RICLK, EXT_REFCLK, LICLK },		/* 1001 */
+	{ EXT_REFCLK, RICLK, EXT_REFCLK },	/* 1010 */
+	{ RICLK, RICLK, EXT_REFCLK },		/* 1011 */
+	{ LICLK, EXT_REFCLK, LICLK },		/* 1100 */
+	{ EXT_REFCLK, EXT_REFCLK, LICLK },	/* 1101 */
+	{ LICLK, RICLK, EXT_REFCLK },		/* 1110 */
+	{ EXT_REFCLK, RICLK, EXT_REFCLK },	/* 1111 */
+};
+
+static u8 serdes_am654_clk_mux_get_parent(struct clk_hw *hw)
+{
+	struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
+	struct regmap *regmap = mux->regmap;
+	unsigned int reg = mux->reg;
+	unsigned int val;
+
+	regmap_read(regmap, reg, &val);
+	val &= AM654_SERDES_CTRL_CLKSEL_MASK;
+	val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT;
+
+	return serdes_am654_mux_table[val][mux->clk_id];
+}
+
+static int serdes_am654_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
+	struct regmap *regmap = mux->regmap;
+	unsigned int reg = mux->reg;
+	int clk_id = mux->clk_id;
+	int parents[SERDES_NUM_CLOCKS];
+	const int *p;
+	u32 val;
+	int found, i;
+	int ret;
+
+	/* get existing setting */
+	regmap_read(regmap, reg, &val);
+	val &= AM654_SERDES_CTRL_CLKSEL_MASK;
+	val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT;
+
+	for (i = 0; i < SERDES_NUM_CLOCKS; i++)
+		parents[i] = serdes_am654_mux_table[val][i];
+
+	/* change parent of this clock. others left intact */
+	parents[clk_id] = index;
+
+	/* Find the match */
+	for (val = 0; val < SERDES_NUM_MUX_COMBINATIONS; val++) {
+		p = serdes_am654_mux_table[val];
+		found = 1;
+		for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
+			if (parents[i] != p[i]) {
+				found = 0;
+				break;
+			}
+		}
+
+		if (found)
+			break;
+	}
+
+	if (!found) {
+		/*
+		 * This can never happen, unless we missed
+		 * a valid combination in serdes_am654_mux_table.
+		 */
+		WARN(1, "Failed to find the parent of %s clock\n",
+		     hw->init->name);
+		return -EINVAL;
+	}
+
+	val <<= AM654_SERDES_CTRL_CLKSEL_SHIFT;
+	ret = regmap_update_bits(regmap, reg, AM654_SERDES_CTRL_CLKSEL_MASK,
+				 val);
+
+	return ret;
+}
+
+static const struct clk_ops serdes_am654_clk_mux_ops = {
+	.set_parent = serdes_am654_clk_mux_set_parent,
+	.get_parent = serdes_am654_clk_mux_get_parent,
+};
+
+static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
+				     const char *clock_name, int clock_num)
+{
+	struct device_node *node = am654_phy->of_node;
+	struct device *dev = am654_phy->dev;
+	struct serdes_am654_clk_mux *mux;
+	struct device_node *regmap_node;
+	const char **parent_names;
+	struct clk_init_data *init;
+	unsigned int num_parents;
+	struct regmap *regmap;
+	const __be32 *addr;
+	unsigned int reg;
+	struct clk *clk;
+
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	init = &mux->clk_data;
+
+	regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
+	of_node_put(regmap_node);
+	if (!regmap_node) {
+		dev_err(dev, "Fail to get serdes-clk node\n");
+		return -ENODEV;
+	}
+
+	regmap = syscon_node_to_regmap(regmap_node->parent);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Fail to get Syscon regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents < 2) {
+		dev_err(dev, "SERDES clock must have parents\n");
+		return -EINVAL;
+	}
+
+	parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
+				    GFP_KERNEL);
+	if (!parent_names)
+		return -ENOMEM;
+
+	of_clk_parent_fill(node, parent_names, num_parents);
+
+	addr = of_get_address(regmap_node, 0, NULL, NULL);
+	if (!addr)
+		return -EINVAL;
+
+	reg = be32_to_cpu(*addr);
+
+	init->ops = &serdes_am654_clk_mux_ops;
+	init->flags = CLK_SET_RATE_NO_REPARENT;
+	init->parent_names = parent_names;
+	init->num_parents = num_parents;
+	init->name = clock_name;
+
+	mux->regmap = regmap;
+	mux->reg = reg;
+	mux->clk_id = clock_num;
+	mux->hw.init = init;
+
+	clk = devm_clk_register(dev, &mux->hw);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	am654_phy->clks[clock_num] = clk;
+
+	return 0;
+}
+
+static const struct of_device_id serdes_am654_id_table[] = {
+	{
+		.compatible = "ti,phy-am654-serdes",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, serdes_am654_id_table);
+
+static int serdes_am654_regfield_init(struct serdes_am654 *am654_phy)
+{
+	struct regmap *regmap = am654_phy->regmap;
+	struct device *dev = am654_phy->dev;
+
+	am654_phy->cmu_master_cdn_o = devm_regmap_field_alloc(dev, regmap,
+							      cmu_master_cdn_o);
+	if (IS_ERR(am654_phy->cmu_master_cdn_o)) {
+		dev_err(dev, "CMU_MASTER_CDN_O reg field init failed\n");
+		return PTR_ERR(am654_phy->cmu_master_cdn_o);
+	}
+
+	am654_phy->config_version = devm_regmap_field_alloc(dev, regmap,
+							    config_version);
+	if (IS_ERR(am654_phy->config_version)) {
+		dev_err(dev, "CONFIG_VERSION reg field init failed\n");
+		return PTR_ERR(am654_phy->config_version);
+	}
+
+	am654_phy->l1_master_cdn_o = devm_regmap_field_alloc(dev, regmap,
+							     l1_master_cdn_o);
+	if (IS_ERR(am654_phy->l1_master_cdn_o)) {
+		dev_err(dev, "L1_MASTER_CDN_O reg field init failed\n");
+		return PTR_ERR(am654_phy->l1_master_cdn_o);
+	}
+
+	am654_phy->cmu_ok_i_0 = devm_regmap_field_alloc(dev, regmap,
+							cmu_ok_i_0);
+	if (IS_ERR(am654_phy->cmu_ok_i_0)) {
+		dev_err(dev, "CMU_OK_I_0 reg field init failed\n");
+		return PTR_ERR(am654_phy->cmu_ok_i_0);
+	}
+
+	am654_phy->por_en = devm_regmap_field_alloc(dev, regmap, por_en);
+	if (IS_ERR(am654_phy->por_en)) {
+		dev_err(dev, "POR_EN reg field init failed\n");
+		return PTR_ERR(am654_phy->por_en);
+	}
+
+	am654_phy->tx0_enable = devm_regmap_field_alloc(dev, regmap,
+							tx0_enable);
+	if (IS_ERR(am654_phy->tx0_enable)) {
+		dev_err(dev, "TX0_ENABLE reg field init failed\n");
+		return PTR_ERR(am654_phy->tx0_enable);
+	}
+
+	am654_phy->rx0_enable = devm_regmap_field_alloc(dev, regmap,
+							rx0_enable);
+	if (IS_ERR(am654_phy->rx0_enable)) {
+		dev_err(dev, "RX0_ENABLE reg field init failed\n");
+		return PTR_ERR(am654_phy->rx0_enable);
+	}
+
+	am654_phy->pll_enable = devm_regmap_field_alloc(dev, regmap,
+							pll_enable);
+	if (IS_ERR(am654_phy->pll_enable)) {
+		dev_err(dev, "PLL_ENABLE reg field init failed\n");
+		return PTR_ERR(am654_phy->pll_enable);
+	}
+
+	am654_phy->pll_ok = devm_regmap_field_alloc(dev, regmap, pll_ok);
+	if (IS_ERR(am654_phy->pll_ok)) {
+		dev_err(dev, "PLL_OK reg field init failed\n");
+		return PTR_ERR(am654_phy->pll_ok);
+	}
+
+	return 0;
+}
+
+static int serdes_am654_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct clk_onecell_data *clk_data;
+	struct serdes_am654 *am654_phy;
+	struct mux_control *control;
+	const char *clock_name;
+	struct regmap *regmap;
+	void __iomem *base;
+	struct phy *phy;
+	int ret;
+	int i;
+
+	am654_phy = devm_kzalloc(dev, sizeof(*am654_phy), GFP_KERNEL);
+	if (!am654_phy)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &serdes_am654_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to initialize regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	control = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(control))
+		return PTR_ERR(control);
+
+	am654_phy->dev = dev;
+	am654_phy->of_node = node;
+	am654_phy->regmap = regmap;
+	am654_phy->control = control;
+	am654_phy->type = PHY_NONE;
+
+	ret = serdes_am654_regfield_init(am654_phy);
+	if (ret) {
+		dev_err(dev, "Failed to initialize regfields\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, am654_phy);
+
+	for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
+		ret = of_property_read_string_index(node, "clock-output-names",
+						    i, &clock_name);
+		if (ret) {
+			dev_err(dev, "Failed to get clock name\n");
+			return ret;
+		}
+
+		ret = serdes_am654_clk_register(am654_phy, clock_name, i);
+		if (ret) {
+			dev_err(dev, "Failed to initialize clock %s\n",
+				clock_name);
+			return ret;
+		}
+	}
+
+	clk_data = &am654_phy->clk_data;
+	clk_data->clks = am654_phy->clks;
+	clk_data->clk_num = SERDES_NUM_CLOCKS;
+	ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(dev);
+
+	phy = devm_phy_create(dev, NULL, &ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, am654_phy);
+	phy_provider = devm_of_phy_provider_register(dev, serdes_am654_xlate);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		goto clk_err;
+	}
+
+	return 0;
+
+clk_err:
+	of_clk_del_provider(node);
+
+	return ret;
+}
+
+static int serdes_am654_remove(struct platform_device *pdev)
+{
+	struct serdes_am654 *am654_phy = platform_get_drvdata(pdev);
+	struct device_node *node = am654_phy->of_node;
+
+	pm_runtime_disable(&pdev->dev);
+	of_clk_del_provider(node);
+
+	return 0;
+}
+
+static struct platform_driver serdes_am654_driver = {
+	.probe		= serdes_am654_probe,
+	.remove		= serdes_am654_remove,
+	.driver		= {
+		.name	= "phy-am654",
+		.of_match_table = serdes_am654_id_table,
+	},
+};
+module_platform_driver(serdes_am654_driver);
+
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("TI AM654x SERDES driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 68ce4a082b9b..739aaa0eb0ef 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -56,51 +56,73 @@
 
 #define SATA_PLL_SOFT_RESET	BIT(18)
 
-#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK	0x003FC000
+#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK	GENMASK(21, 14)
 #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT	14
 
-#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	0xFFC00000
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK	GENMASK(31, 22)
 #define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT	22
 
-#define PIPE3_PHY_TX_RX_POWERON		0x3
-#define PIPE3_PHY_TX_RX_POWEROFF	0x0
+#define PIPE3_PHY_RX_POWERON       (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
+#define PIPE3_PHY_TX_POWERON       (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
 
 #define PCIE_PCS_MASK			0xFF0000
 #define PCIE_PCS_DELAY_COUNT_SHIFT	0x10
 
-#define PCIEPHYRX_ANA_PROGRAMMABILITY	0x0000000C
+#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY	0x0000000C
 #define INTERFACE_MASK			GENMASK(31, 27)
 #define INTERFACE_SHIFT			27
+#define INTERFACE_MODE_USBSS		BIT(4)
+#define INTERFACE_MODE_SATA_1P5		BIT(3)
+#define INTERFACE_MODE_SATA_3P0		BIT(2)
+#define INTERFACE_MODE_PCIE		BIT(0)
+
 #define LOSD_MASK			GENMASK(17, 14)
 #define LOSD_SHIFT			14
 #define MEM_PLLDIV			GENMASK(6, 5)
 
-#define PCIEPHYRX_TRIM			0x0000001C
-#define MEM_DLL_TRIM_SEL		GENMASK(31, 30)
+#define PIPE3_PHY_RX_TRIM		0x0000001C
+#define MEM_DLL_TRIM_SEL_MASK		GENMASK(31, 30)
 #define MEM_DLL_TRIM_SHIFT		30
 
-#define PCIEPHYRX_DLL			0x00000024
-#define MEM_DLL_PHINT_RATE		GENMASK(31, 30)
+#define PIPE3_PHY_RX_DLL		0x00000024
+#define MEM_DLL_PHINT_RATE_MASK		GENMASK(31, 30)
+#define MEM_DLL_PHINT_RATE_SHIFT	30
 
-#define PCIEPHYRX_DIGITAL_MODES		0x00000028
+#define PIPE3_PHY_RX_DIGITAL_MODES		0x00000028
+#define MEM_HS_RATE_MASK		GENMASK(28, 27)
+#define MEM_HS_RATE_SHIFT		27
+#define MEM_OVRD_HS_RATE		BIT(26)
+#define MEM_OVRD_HS_RATE_SHIFT		26
 #define MEM_CDR_FASTLOCK		BIT(23)
-#define MEM_CDR_LBW			GENMASK(22, 21)
-#define MEM_CDR_STEPCNT			GENMASK(20, 19)
+#define MEM_CDR_FASTLOCK_SHIFT		23
+#define MEM_CDR_LBW_MASK		GENMASK(22, 21)
+#define MEM_CDR_LBW_SHIFT		21
+#define MEM_CDR_STEPCNT_MASK		GENMASK(20, 19)
+#define MEM_CDR_STEPCNT_SHIFT		19
 #define MEM_CDR_STL_MASK		GENMASK(18, 16)
 #define MEM_CDR_STL_SHIFT		16
 #define MEM_CDR_THR_MASK		GENMASK(15, 13)
 #define MEM_CDR_THR_SHIFT		13
 #define MEM_CDR_THR_MODE		BIT(12)
-#define MEM_CDR_CDR_2NDO_SDM_MODE	BIT(11)
-#define MEM_OVRD_HS_RATE		BIT(26)
-
-#define PCIEPHYRX_EQUALIZER		0x00000038
-#define MEM_EQLEV			GENMASK(31, 16)
-#define MEM_EQFTC			GENMASK(15, 11)
-#define MEM_EQCTL			GENMASK(10, 7)
+#define MEM_CDR_THR_MODE_SHIFT		12
+#define MEM_CDR_2NDO_SDM_MODE		BIT(11)
+#define MEM_CDR_2NDO_SDM_MODE_SHIFT	11
+
+#define PIPE3_PHY_RX_EQUALIZER		0x00000038
+#define MEM_EQLEV_MASK			GENMASK(31, 16)
+#define MEM_EQLEV_SHIFT			16
+#define MEM_EQFTC_MASK			GENMASK(15, 11)
+#define MEM_EQFTC_SHIFT			11
+#define MEM_EQCTL_MASK			GENMASK(10, 7)
 #define MEM_EQCTL_SHIFT			7
 #define MEM_OVRD_EQLEV			BIT(2)
+#define MEM_OVRD_EQLEV_SHIFT		2
 #define MEM_OVRD_EQFTC			BIT(1)
+#define MEM_OVRD_EQFTC_SHIFT		1
+
+#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES	0x44
+#define MEM_CDR_LOS_SOURCE_MASK		GENMASK(10, 9)
+#define MEM_CDR_LOS_SOURCE_SHIFT	9
 
 /*
  * This is an Empirical value that works, need to confirm the actual
@@ -110,6 +132,10 @@
 #define PLL_IDLE_TIME	100	/* in milliseconds */
 #define PLL_LOCK_TIME	100	/* in milliseconds */
 
+enum pipe3_mode { PIPE3_MODE_PCIE = 1,
+		  PIPE3_MODE_SATA,
+		  PIPE3_MODE_USBSS };
+
 struct pipe3_dpll_params {
 	u16	m;
 	u8	n;
@@ -123,6 +149,27 @@ struct pipe3_dpll_map {
 	struct pipe3_dpll_params params;
 };
 
+struct pipe3_settings {
+	u8 ana_interface;
+	u8 ana_losd;
+	u8 dig_fastlock;
+	u8 dig_lbw;
+	u8 dig_stepcnt;
+	u8 dig_stl;
+	u8 dig_thr;
+	u8 dig_thr_mode;
+	u8 dig_2ndo_sdm_mode;
+	u8 dig_hs_rate;
+	u8 dig_ovrd_hs_rate;
+	u8 dll_trim_sel;
+	u8 dll_phint_rate;
+	u8 eq_lev;
+	u8 eq_ftc;
+	u8 eq_ctl;
+	u8 eq_ovrd_lev;
+	u8 eq_ovrd_ftc;
+};
+
 struct ti_pipe3 {
 	void __iomem		*pll_ctrl_base;
 	void __iomem		*phy_rx;
@@ -141,6 +188,8 @@ struct ti_pipe3 {
 	unsigned int		power_reg; /* power reg. index within syscon */
 	unsigned int		pcie_pcs_reg; /* pcs reg. index in syscon */
 	bool			sata_refclk_enabled;
+	enum pipe3_mode		mode;
+	struct pipe3_settings	settings;
 };
 
 static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -163,6 +212,89 @@ static struct pipe3_dpll_map dpll_map_sata[] = {
 	{ },					/* Terminator */
 };
 
+struct pipe3_data {
+	enum pipe3_mode mode;
+	struct pipe3_dpll_map *dpll_map;
+	struct pipe3_settings settings;
+};
+
+static struct pipe3_data data_usb = {
+	.mode = PIPE3_MODE_USBSS,
+	.dpll_map = dpll_map_usb,
+	.settings = {
+	/* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */
+		.ana_interface = INTERFACE_MODE_USBSS,
+		.ana_losd = 0xa,
+		.dig_fastlock = 1,
+		.dig_lbw = 3,
+		.dig_stepcnt = 0,
+		.dig_stl = 0x3,
+		.dig_thr = 1,
+		.dig_thr_mode = 1,
+		.dig_2ndo_sdm_mode = 0,
+		.dig_hs_rate = 0,
+		.dig_ovrd_hs_rate = 1,
+		.dll_trim_sel = 0x2,
+		.dll_phint_rate = 0x3,
+		.eq_lev = 0,
+		.eq_ftc = 0,
+		.eq_ctl = 0x9,
+		.eq_ovrd_lev = 0,
+		.eq_ovrd_ftc = 0,
+	},
+};
+
+static struct pipe3_data data_sata = {
+	.mode = PIPE3_MODE_SATA,
+	.dpll_map = dpll_map_sata,
+	.settings = {
+	/* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */
+		.ana_interface = INTERFACE_MODE_SATA_3P0,
+		.ana_losd = 0x5,
+		.dig_fastlock = 1,
+		.dig_lbw = 3,
+		.dig_stepcnt = 0,
+		.dig_stl = 0x3,
+		.dig_thr = 1,
+		.dig_thr_mode = 1,
+		.dig_2ndo_sdm_mode = 0,
+		.dig_hs_rate = 0,	/* Not in TRM preferred settings */
+		.dig_ovrd_hs_rate = 0,	/* Not in TRM preferred settings */
+		.dll_trim_sel = 0x1,
+		.dll_phint_rate = 0x2,	/* for 1.5 GHz DPLL clock */
+		.eq_lev = 0,
+		.eq_ftc = 0x1f,
+		.eq_ctl = 0,
+		.eq_ovrd_lev = 1,
+		.eq_ovrd_ftc = 1,
+	},
+};
+
+static struct pipe3_data data_pcie = {
+	.mode = PIPE3_MODE_PCIE,
+	.settings = {
+	/* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */
+		.ana_interface = INTERFACE_MODE_PCIE,
+		.ana_losd = 0xa,
+		.dig_fastlock = 1,
+		.dig_lbw = 3,
+		.dig_stepcnt = 0,
+		.dig_stl = 0x3,
+		.dig_thr = 1,
+		.dig_thr_mode = 1,
+		.dig_2ndo_sdm_mode = 0,
+		.dig_hs_rate = 0,
+		.dig_ovrd_hs_rate = 0,
+		.dll_trim_sel = 0x2,
+		.dll_phint_rate = 0x3,
+		.eq_lev = 0,
+		.eq_ftc = 0x1f,
+		.eq_ctl = 1,
+		.eq_ovrd_lev = 0,
+		.eq_ovrd_ftc = 0,
+	},
+};
+
 static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
 {
 	return __raw_readl(addr + offset);
@@ -196,7 +328,6 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
 
 static int ti_pipe3_power_off(struct phy *x)
 {
-	u32 val;
 	int ret;
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
 
@@ -205,13 +336,13 @@ static int ti_pipe3_power_off(struct phy *x)
 		return 0;
 	}
 
-	val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
-
 	ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
-				 PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val);
+				 PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0);
 	return ret;
 }
 
+static void ti_pipe3_calibrate(struct ti_pipe3 *phy);
+
 static int ti_pipe3_power_on(struct phy *x)
 {
 	u32 val;
@@ -219,6 +350,7 @@ static int ti_pipe3_power_on(struct phy *x)
 	int ret;
 	unsigned long rate;
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
+	bool rx_pending = false;
 
 	if (!phy->phy_power_syscon) {
 		omap_control_phy_power(phy->control_dev, 1);
@@ -231,14 +363,35 @@ static int ti_pipe3_power_on(struct phy *x)
 		return -EINVAL;
 	}
 	rate = rate / 1000000;
-	mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
-		  OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
-	val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
-	val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
-
+	mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
+	val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
 	ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
 				 mask, val);
-	return ret;
+	/*
+	 * For PCIe, TX and RX must be powered on simultaneously.
+	 * For USB and SATA, TX must be powered on before RX
+	 */
+	mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+	if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) {
+		val = PIPE3_PHY_TX_POWERON;
+		rx_pending = true;
+	} else {
+		val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
+	}
+
+	regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+			   mask, val);
+
+	if (rx_pending) {
+		val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
+		regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+				   mask, val);
+	}
+
+	if (phy->mode == PIPE3_MODE_PCIE)
+		ti_pipe3_calibrate(phy);
+
+	return 0;
 }
 
 static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
@@ -300,32 +453,55 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
 static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
 {
 	u32 val;
+	struct pipe3_settings *s = &phy->settings;
 
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY);
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
 	val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
-	val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES);
-	val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK |
-		 MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE);
-	val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT |
-		0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE);
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM);
-	val &= ~MEM_DLL_TRIM_SEL;
-	val |= 0x2 << MEM_DLL_TRIM_SHIFT;
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL);
-	val |= MEM_DLL_PHINT_RATE;
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val);
-
-	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER);
-	val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
-	val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT;
-	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val);
+	val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
+	val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
+		 MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
+		 MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
+	val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
+		s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
+		s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
+		s->dig_lbw << MEM_CDR_LBW_SHIFT |
+		s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
+		s->dig_stl << MEM_CDR_STL_SHIFT |
+		s->dig_thr << MEM_CDR_THR_SHIFT |
+		s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
+		s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
+	val &= ~MEM_DLL_TRIM_SEL_MASK;
+	val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
+	val &= ~MEM_DLL_PHINT_RATE_MASK;
+	val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
+	val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
+		 MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
+	val |= s->eq_lev << MEM_EQLEV_SHIFT |
+		s->eq_ftc << MEM_EQFTC_SHIFT |
+		s->eq_ctl << MEM_EQCTL_SHIFT |
+		s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
+		s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
+
+	if (phy->mode == PIPE3_MODE_SATA) {
+		val = ti_pipe3_readl(phy->phy_rx,
+				     SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
+		val &= ~MEM_CDR_LOS_SOURCE_MASK;
+		ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
+				val);
+	}
 }
 
 static int ti_pipe3_init(struct phy *x)
@@ -340,7 +516,7 @@ static int ti_pipe3_init(struct phy *x)
 	 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
 	 * 18-1804.
 	 */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode == PIPE3_MODE_PCIE) {
 		if (!phy->pcs_syscon) {
 			omap_control_pcie_pcs(phy->control_dev, 0x96);
 			return 0;
@@ -349,12 +525,7 @@ static int ti_pipe3_init(struct phy *x)
 		val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
 		ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
 					 PCIE_PCS_MASK, val);
-		if (ret)
-			return ret;
-
-		ti_pipe3_calibrate(phy);
-
-		return 0;
+		return ret;
 	}
 
 	/* Bring it out of IDLE if it is IDLE */
@@ -367,8 +538,7 @@ static int ti_pipe3_init(struct phy *x)
 
 	/* SATA has issues if re-programmed when locked */
 	val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
-	if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
-							"ti,phy-pipe3-sata"))
+	if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
 		return ret;
 
 	/* Program the DPLL */
@@ -378,6 +548,8 @@ static int ti_pipe3_init(struct phy *x)
 		return -EINVAL;
 	}
 
+	ti_pipe3_calibrate(phy);
+
 	return ret;
 }
 
@@ -390,12 +562,11 @@ static int ti_pipe3_exit(struct phy *x)
 	/* If dpll_reset_syscon is not present we wont power down SATA DPLL
 	 * due to Errata i783
 	 */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
-	    !phy->dpll_reset_syscon)
+	if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
 		return 0;
 
 	/* PCIe doesn't have internal DPLL */
-	if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode != PIPE3_MODE_PCIE) {
 		/* Put DPLL in IDLE mode */
 		val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
 		val |= PLL_IDLE;
@@ -418,7 +589,7 @@ static int ti_pipe3_exit(struct phy *x)
 	}
 
 	/* i783: SATA needs control bit toggle after PLL unlock */
-	if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
+	if (phy->mode == PIPE3_MODE_SATA) {
 		regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
 				   SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
 		regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
@@ -443,7 +614,6 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 {
 	struct clk *clk;
 	struct device *dev = phy->dev;
-	struct device_node *node = dev->of_node;
 
 	phy->refclk = devm_clk_get(dev, "refclk");
 	if (IS_ERR(phy->refclk)) {
@@ -451,11 +621,11 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 		/* older DTBs have missing refclk in SATA PHY
 		 * so don't bail out in case of SATA PHY.
 		 */
-		if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
+		if (phy->mode != PIPE3_MODE_SATA)
 			return PTR_ERR(phy->refclk);
 	}
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+	if (phy->mode != PIPE3_MODE_SATA) {
 		phy->wkupclk = devm_clk_get(dev, "wkupclk");
 		if (IS_ERR(phy->wkupclk)) {
 			dev_err(dev, "unable to get wkupclk\n");
@@ -465,8 +635,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 		phy->wkupclk = ERR_PTR(-ENODEV);
 	}
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") ||
-	    phy->phy_power_syscon) {
+	if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
 		phy->sys_clk = devm_clk_get(dev, "sysclk");
 		if (IS_ERR(phy->sys_clk)) {
 			dev_err(dev, "unable to get sysclk\n");
@@ -474,7 +643,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
 		}
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode == PIPE3_MODE_PCIE) {
 		clk = devm_clk_get(dev, "dpll_ref");
 		if (IS_ERR(clk)) {
 			dev_err(dev, "unable to get dpll ref clk\n");
@@ -546,7 +715,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 		phy->control_dev = &control_pdev->dev;
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+	if (phy->mode == PIPE3_MODE_PCIE) {
 		phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
 								  "syscon-pcs");
 		if (IS_ERR(phy->pcs_syscon)) {
@@ -564,7 +733,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 		}
 	}
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+	if (phy->mode == PIPE3_MODE_SATA) {
 		phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
 							"syscon-pllreset");
 		if (IS_ERR(phy->dpll_reset_syscon)) {
@@ -589,12 +758,8 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
 {
 	struct resource *res;
 	struct device *dev = phy->dev;
-	struct device_node *node = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
 
-	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
-		return 0;
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "phy_rx");
 	phy->phy_rx = devm_ioremap_resource(dev, res);
@@ -611,24 +776,12 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
 static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
 {
 	struct resource *res;
-	const struct of_device_id *match;
 	struct device *dev = phy->dev;
-	struct device_node *node = dev->of_node;
 	struct platform_device *pdev = to_platform_device(dev);
 
-	if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
+	if (phy->mode == PIPE3_MODE_PCIE)
 		return 0;
 
-	match = of_match_device(ti_pipe3_id_table, dev);
-	if (!match)
-		return -EINVAL;
-
-	phy->dpll_map = (struct pipe3_dpll_map *)match->data;
-	if (!phy->dpll_map) {
-		dev_err(dev, "no DPLL data\n");
-		return -EINVAL;
-	}
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "pll_ctrl");
 	phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
@@ -640,15 +793,29 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	struct ti_pipe3 *phy;
 	struct phy *generic_phy;
 	struct phy_provider *phy_provider;
-	struct device_node *node = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	int ret;
+	const struct of_device_id *match;
+	struct pipe3_data *data;
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
 		return -ENOMEM;
 
-	phy->dev		= dev;
+	match = of_match_device(ti_pipe3_id_table, dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct pipe3_data *)match->data;
+	if (!data) {
+		dev_err(dev, "no driver data\n");
+		return -EINVAL;
+	}
+
+	phy->dev = dev;
+	phy->mode = data->mode;
+	phy->dpll_map = data->dpll_map;
+	phy->settings = data->settings;
 
 	ret = ti_pipe3_get_pll_base(phy);
 	if (ret)
@@ -672,7 +839,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	/*
 	 * Prevent auto-disable of refclk for SATA PHY due to Errata i783
 	 */
-	if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+	if (phy->mode == PIPE3_MODE_SATA) {
 		if (!IS_ERR(phy->refclk)) {
 			clk_prepare_enable(phy->refclk);
 			phy->sata_refclk_enabled = true;
@@ -762,18 +929,19 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
 		.compatible = "ti,phy-usb3",
-		.data = dpll_map_usb,
+		.data = &data_usb,
 	},
 	{
 		.compatible = "ti,omap-usb3",
-		.data = dpll_map_usb,
+		.data = &data_usb,
 	},
 	{
 		.compatible = "ti,phy-pipe3-sata",
-		.data = dpll_map_sata,
+		.data = &data_sata,
 	},
 	{
 		.compatible = "ti,phy-pipe3-pcie",
+		.data = &data_pcie,
 	},
 	{}
 };