diff options
author | Yunzhi Li | 2014-12-12 23:07:46 +0800 |
---|---|---|
committer | Kishon Vijay Abraham I | 2015-01-30 16:06:47 +0530 |
commit | 64d11406de2eac7330d8905ac064d62befe5a0b0 (patch) | |
tree | 0c00a3cf780230ec8133eb54b4d3565b789fba26 /drivers/phy | |
parent | 9b43e5ec89dd0c863959ae0157ad3d693588ab44 (diff) |
phy: add a driver for the Rockchip SoC internal USB2.0 PHY
This patch to add a generic PHY driver for ROCKCHIP usb PHYs,
currently this driver can support RK3288. The RK3288 SoC have
three independent USB PHY IPs which are all configured through a
set of registers located in the GRF (general register files)
module.
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r-- | drivers/phy/Kconfig | 7 | ||||
-rw-r--r-- | drivers/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/phy-rockchip-usb.c | 158 |
3 files changed, 166 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index ccad8809ecb1..b24500afba25 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA depends on OF select GENERIC_PHY +config PHY_ROCKCHIP_USB + tristate "Rockchip USB2 PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip USB 2.0 PHY. + config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index aa74f961e44e..48bf5a15f161 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c new file mode 100644 index 000000000000..22011c3b6a4b --- /dev/null +++ b/drivers/phy/phy-rockchip-usb.c @@ -0,0 +1,158 @@ +/* + * Rockchip usb PHY driver + * + * Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com> + * Copyright (C) 2014 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +/* + * The higher 16-bit of this register is used for write protection + * only if BIT(13 + 16) set to 1 the BIT(13) can be written. + */ +#define SIDDQ_WRITE_ENA BIT(29) +#define SIDDQ_ON BIT(13) +#define SIDDQ_OFF (0 << 13) + +struct rockchip_usb_phy { + unsigned int reg_offset; + struct regmap *reg_base; + struct clk *clk; + struct phy *phy; +}; + +static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, + bool siddq) +{ + return regmap_write(phy->reg_base, phy->reg_offset, + SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF)); +} + +static int rockchip_usb_phy_power_off(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + /* Power down usb phy analog blocks by set siddq 1 */ + ret = rockchip_usb_phy_power(phy, 1); + if (ret) + return ret; + + clk_disable_unprepare(phy->clk); + if (ret) + return ret; + + return 0; +} + +static int rockchip_usb_phy_power_on(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + ret = clk_prepare_enable(phy->clk); + if (ret) + return ret; + + /* Power up usb phy analog blocks by set siddq 0 */ + ret = rockchip_usb_phy_power(phy, 0); + if (ret) + return ret; + + return 0; +} + +static struct phy_ops ops = { + .power_on = rockchip_usb_phy_power_on, + .power_off = rockchip_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_usb_phy *rk_phy; + struct phy_provider *phy_provider; + struct device_node *child; + struct regmap *grf; + unsigned int reg_offset; + + grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); + if (IS_ERR(grf)) { + dev_err(&pdev->dev, "Missing rockchip,grf property\n"); + return PTR_ERR(grf); + } + + for_each_available_child_of_node(dev->of_node, child) { + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + if (of_property_read_u32(child, "reg", ®_offset)) { + dev_err(dev, "missing reg property in node %s\n", + child->name); + return -EINVAL; + } + + rk_phy->reg_offset = reg_offset; + rk_phy->reg_base = grf; + + rk_phy->clk = of_clk_get_by_name(child, "phyclk"); + if (IS_ERR(rk_phy->clk)) + rk_phy->clk = NULL; + + rk_phy->phy = devm_phy_create(dev, child, &ops); + if (IS_ERR(rk_phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(rk_phy->phy); + } + phy_set_drvdata(rk_phy->phy, rk_phy); + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_usb_phy_dt_ids[] = { + { .compatible = "rockchip,rk3288-usb-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids); + +static struct platform_driver rockchip_usb_driver = { + .probe = rockchip_usb_phy_probe, + .driver = { + .name = "rockchip-usb-phy", + .owner = THIS_MODULE, + .of_match_table = rockchip_usb_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_usb_driver); + +MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); |