Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits) acer-wmi: support integer return type from WMI methods msi-laptop: fix section mismatch in reference from the function load_scm_model_init acer-wmi: support to set communication device state by new wmid method acer-wmi: allow 64-bits return buffer from WMI methods acer-wmi: check the existence of internal 3G device when set capability platform/x86:delete two unused variables support wlan hotkey on Acer Travelmate 5735Z platform-x86: intel_mid_thermal: Fix memory leak platform/x86: Fix Makefile for intel_mid_powerbtn platform/x86: Simplify intel_mid_powerbtn acer-wmi: Delete out-of-date documentation acerhdf: Clean up includes acerhdf: Drop pointless dependency on THERMAL_HWMON acer-wmi: Update MAINTAINERS wmi: Orphan ACPI-WMI driver tc1100-wmi: Orphan driver acer-wmi: does not allow negative number set to initial device state platform/oaktrail: ACPI EC Extra driver for Oaktrail thinkpad_acpi: Convert printks to pr_<level> thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning ...
author: Linus Torvalds 2011-05-29 11:44:33 -0700
committer: Linus Torvalds 2011-05-29 11:44:33 -0700
commit: 2ba781ced93922e249dee2ac0751faccb4fb0656 (patch)
tree: 8b62346278b60d1bc9765dc6691f07219a27d894 /drivers/platform
parent: 6345d24daf0c1fffe6642081d783cdf653ebaa5c (diff)
parent: 437cb0dbd104a1564e0e78f0d486b97677f80909 (diff)
33 files changed, 1390 insertions, 1000 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5cb999b50f95..45e0191c35dd 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -39,7 +39,7 @@ config ACER_WMI
 
 config ACERHDF
 	tristate "Acer Aspire One temperature and fan driver"
-	depends on THERMAL && THERMAL_HWMON && ACPI
+	depends on THERMAL && ACPI
 	---help---
 	  This is a driver for Acer Aspire One netbooks. It allows to access
 	  the temperature sensor and to control the fan.
@@ -760,4 +760,13 @@ config MXM_WMI
           MXM is a standard for laptop graphics cards, the WMI interface
 	  is required for switchable nvidia graphics machines
 
+config INTEL_OAKTRAIL
+	tristate "Intel Oaktrail Platform Extras"
+	depends on ACPI
+	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
+	---help---
+	  Intel Oaktrail platform need this driver to provide interfaces to
+	  enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
+	  here; it will only load on supported platforms.
+
 endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index a7ab3bc7b3a1..afc1f832aa67 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -41,5 +41,6 @@ obj-$(CONFIG_XO1_RFKILL)	+= xo1-rfkill.o
 obj-$(CONFIG_XO15_EBOOK)	+= xo15-ebook.o
 obj-$(CONFIG_IBM_RTL)		+= ibm_rtl.o
 obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop.o
-obj-$(CONFIG_INTEL_MFLD_THERMAL)	+= intel_mid_thermal.o
 obj-$(CONFIG_MXM_WMI)		+= mxm-wmi.o
+obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
+obj-$(CONFIG_INTEL_OAKTRAIL)	+= intel_oaktrail.o
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index ac4e7f83ce6c..005417bd429e 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -98,13 +98,26 @@ enum acer_wmi_event_ids {
 
 static const struct key_entry acer_wmi_keymap[] = {
 	{KE_KEY, 0x01, {KEY_WLAN} },     /* WiFi */
+	{KE_KEY, 0x03, {KEY_WLAN} },     /* WiFi */
 	{KE_KEY, 0x12, {KEY_BLUETOOTH} },	/* BT */
 	{KE_KEY, 0x21, {KEY_PROG1} },    /* Backup */
 	{KE_KEY, 0x22, {KEY_PROG2} },    /* Arcade */
 	{KE_KEY, 0x23, {KEY_PROG3} },    /* P_Key */
 	{KE_KEY, 0x24, {KEY_PROG4} },    /* Social networking_Key */
+	{KE_IGNORE, 0x41, {KEY_MUTE} },
+	{KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} },
+	{KE_IGNORE, 0x43, {KEY_NEXTSONG} },
+	{KE_IGNORE, 0x44, {KEY_PLAYPAUSE} },
+	{KE_IGNORE, 0x45, {KEY_STOP} },
+	{KE_IGNORE, 0x48, {KEY_VOLUMEUP} },
+	{KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} },
+	{KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} },
+	{KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} },
+	{KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} },
 	{KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} },	/* Display Switch */
+	{KE_IGNORE, 0x81, {KEY_SLEEP} },
 	{KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} },	/* Touch Pad On/Off */
+	{KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} },
 	{KE_END, 0}
 };
 
@@ -122,6 +135,7 @@ struct event_return_value {
  */
 #define ACER_WMID3_GDS_WIRELESS		(1<<0)	/* WiFi */
 #define ACER_WMID3_GDS_THREEG		(1<<6)	/* 3G */
+#define ACER_WMID3_GDS_WIMAX		(1<<7)	/* WiMAX */
 #define ACER_WMID3_GDS_BLUETOOTH	(1<<11)	/* BT */
 
 struct lm_input_params {
@@ -737,8 +751,11 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out)
 
 	obj = (union acpi_object *) result.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
-		obj->buffer.length == sizeof(u32)) {
+		(obj->buffer.length == sizeof(u32) ||
+		obj->buffer.length == sizeof(u64))) {
 		tmp = *((u32 *) obj->buffer.pointer);
+	} else if (obj->type == ACPI_TYPE_INTEGER) {
+		tmp = (u32) obj->integer.value;
 	} else {
 		tmp = 0;
 	}
@@ -866,8 +883,11 @@ static acpi_status WMID_set_capabilities(void)
 
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
-		obj->buffer.length == sizeof(u32)) {
+		(obj->buffer.length == sizeof(u32) ||
+		obj->buffer.length == sizeof(u64))) {
 		devices = *((u32 *) obj->buffer.pointer);
+	} else if (obj->type == ACPI_TYPE_INTEGER) {
+		devices = (u32) obj->integer.value;
 	} else {
 		kfree(out.pointer);
 		return AE_ERROR;
@@ -876,7 +896,8 @@ static acpi_status WMID_set_capabilities(void)
 	dmi_walk(type_aa_dmi_decode, NULL);
 	if (!has_type_aa) {
 		interface->capability |= ACER_CAP_WIRELESS;
-		interface->capability |= ACER_CAP_THREEG;
+		if (devices & 0x40)
+			interface->capability |= ACER_CAP_THREEG;
 		if (devices & 0x10)
 			interface->capability |= ACER_CAP_BLUETOOTH;
 	}
@@ -961,10 +982,12 @@ static void __init acer_commandline_init(void)
 	 * These will all fail silently if the value given is invalid, or the
 	 * capability isn't available on the given interface
 	 */
-	set_u32(mailled, ACER_CAP_MAILLED);
-	if (!has_type_aa)
+	if (mailled >= 0)
+		set_u32(mailled, ACER_CAP_MAILLED);
+	if (!has_type_aa && threeg >= 0)
 		set_u32(threeg, ACER_CAP_THREEG);
-	set_u32(brightness, ACER_CAP_BRIGHTNESS);
+	if (brightness >= 0)
+		set_u32(brightness, ACER_CAP_BRIGHTNESS);
 }
 
 /*
@@ -1081,7 +1104,7 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device)
 		return AE_ERROR;
 	}
 	if (obj->buffer.length != 8) {
-		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		pr_warn("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return AE_ERROR;
 	}
@@ -1090,8 +1113,8 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device)
 	kfree(obj);
 
 	if (return_value.error_code || return_value.ec_return_value)
-		pr_warning("Get Device Status failed: "
-			"0x%x - 0x%x\n", return_value.error_code,
+		pr_warn("Get Device Status failed: 0x%x - 0x%x\n",
+			return_value.error_code,
 			return_value.ec_return_value);
 	else
 		*value = !!(return_value.devices & device);
@@ -1124,6 +1147,114 @@ static acpi_status get_device_status(u32 *value, u32 cap)
 	}
 }
 
+static acpi_status wmid3_set_device_status(u32 value, u16 device)
+{
+	struct wmid3_gds_return_value return_value;
+	acpi_status status;
+	union acpi_object *obj;
+	u16 devices;
+	struct wmid3_gds_input_param params = {
+		.function_num = 0x1,
+		.hotkey_number = 0x01,
+		.devices = ACER_WMID3_GDS_WIRELESS &
+				ACER_WMID3_GDS_THREEG &
+				ACER_WMID3_GDS_WIMAX &
+				ACER_WMID3_GDS_BLUETOOTH,
+	};
+	struct acpi_buffer input = {
+		sizeof(struct wmid3_gds_input_param),
+		&params
+	};
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	obj = output.pointer;
+
+	if (!obj)
+		return AE_ERROR;
+	else if (obj->type != ACPI_TYPE_BUFFER) {
+		kfree(obj);
+		return AE_ERROR;
+	}
+	if (obj->buffer.length != 8) {
+		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		kfree(obj);
+		return AE_ERROR;
+	}
+
+	return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+	kfree(obj);
+
+	if (return_value.error_code || return_value.ec_return_value) {
+		pr_warning("Get Current Device Status failed: "
+			"0x%x - 0x%x\n", return_value.error_code,
+			return_value.ec_return_value);
+		return status;
+	}
+
+	devices = return_value.devices;
+	params.function_num = 0x2;
+	params.hotkey_number = 0x01;
+	params.devices = (value) ? (devices | device) : (devices & ~device);
+
+	status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2);
+	if (ACPI_FAILURE(status))
+		return status;
+
+	obj = output2.pointer;
+
+	if (!obj)
+		return AE_ERROR;
+	else if (obj->type != ACPI_TYPE_BUFFER) {
+		kfree(obj);
+		return AE_ERROR;
+	}
+	if (obj->buffer.length != 4) {
+		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		kfree(obj);
+		return AE_ERROR;
+	}
+
+	return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer);
+	kfree(obj);
+
+	if (return_value.error_code || return_value.ec_return_value)
+		pr_warning("Set Device Status failed: "
+			"0x%x - 0x%x\n", return_value.error_code,
+			return_value.ec_return_value);
+
+	return status;
+}
+
+static acpi_status set_device_status(u32 value, u32 cap)
+{
+	if (wmi_has_guid(WMID_GUID3)) {
+		u16 device;
+
+		switch (cap) {
+		case ACER_CAP_WIRELESS:
+			device = ACER_WMID3_GDS_WIRELESS;
+			break;
+		case ACER_CAP_BLUETOOTH:
+			device = ACER_WMID3_GDS_BLUETOOTH;
+			break;
+		case ACER_CAP_THREEG:
+			device = ACER_WMID3_GDS_THREEG;
+			break;
+		default:
+			return AE_ERROR;
+		}
+		return wmid3_set_device_status(value, device);
+
+	} else {
+		return set_u32(value, cap);
+	}
+}
+
 /*
  * Rfkill devices
  */
@@ -1160,7 +1291,7 @@ static int acer_rfkill_set(void *data, bool blocked)
 	u32 cap = (unsigned long)data;
 
 	if (rfkill_inited) {
-		status = set_u32(!blocked, cap);
+		status = set_device_status(!blocked, cap);
 		if (ACPI_FAILURE(status))
 			return -ENODEV;
 	}
@@ -1317,7 +1448,7 @@ static void acer_wmi_notify(u32 value, void *context)
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		pr_warning("bad event status 0x%x\n", status);
+		pr_warn("bad event status 0x%x\n", status);
 		return;
 	}
 
@@ -1326,12 +1457,12 @@ static void acer_wmi_notify(u32 value, void *context)
 	if (!obj)
 		return;
 	if (obj->type != ACPI_TYPE_BUFFER) {
-		pr_warning("Unknown response received %d\n", obj->type);
+		pr_warn("Unknown response received %d\n", obj->type);
 		kfree(obj);
 		return;
 	}
 	if (obj->buffer.length != 8) {
-		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		pr_warn("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return;
 	}
@@ -1343,7 +1474,7 @@ static void acer_wmi_notify(u32 value, void *context)
 	case WMID_HOTKEY_EVENT:
 		if (return_value.device_state) {
 			u16 device_state = return_value.device_state;
-			pr_debug("deivces states: 0x%x\n", device_state);
+			pr_debug("device state: 0x%x\n", device_state);
 			if (has_cap(ACER_CAP_WIRELESS))
 				rfkill_set_sw_state(wireless_rfkill,
 				!(device_state & ACER_WMID3_GDS_WIRELESS));
@@ -1356,11 +1487,11 @@ static void acer_wmi_notify(u32 value, void *context)
 		}
 		if (!sparse_keymap_report_event(acer_wmi_input_dev,
 				return_value.key_num, 1, true))
-			pr_warning("Unknown key number - 0x%x\n",
+			pr_warn("Unknown key number - 0x%x\n",
 				return_value.key_num);
 		break;
 	default:
-		pr_warning("Unknown function number - %d - %d\n",
+		pr_warn("Unknown function number - %d - %d\n",
 			return_value.function, return_value.key_num);
 		break;
 	}
@@ -1389,7 +1520,7 @@ wmid3_set_lm_mode(struct lm_input_params *params,
 		return AE_ERROR;
 	}
 	if (obj->buffer.length != 4) {
-		pr_warning("Unknown buffer length %d\n", obj->buffer.length);
+		pr_warn("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return AE_ERROR;
 	}
@@ -1414,11 +1545,11 @@ static int acer_wmi_enable_ec_raw(void)
 	status = wmid3_set_lm_mode(&params, &return_value);
 
 	if (return_value.error_code || return_value.ec_return_value)
-		pr_warning("Enabling EC raw mode failed: "
-		       "0x%x - 0x%x\n", return_value.error_code,
-		       return_value.ec_return_value);
+		pr_warn("Enabling EC raw mode failed: 0x%x - 0x%x\n",
+			return_value.error_code,
+			return_value.ec_return_value);
 	else
-		pr_info("Enabled EC raw mode");
+		pr_info("Enabled EC raw mode\n");
 
 	return status;
 }
@@ -1437,9 +1568,9 @@ static int acer_wmi_enable_lm(void)
 	status = wmid3_set_lm_mode(&params, &return_value);
 
 	if (return_value.error_code || return_value.ec_return_value)
-		pr_warning("Enabling Launch Manager failed: "
-		       "0x%x - 0x%x\n", return_value.error_code,
-		       return_value.ec_return_value);
+		pr_warn("Enabling Launch Manager failed: 0x%x - 0x%x\n",
+			return_value.error_code,
+			return_value.ec_return_value);
 
 	return status;
 }
@@ -1506,8 +1637,11 @@ static u32 get_wmid_devices(void)
 
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
-		obj->buffer.length == sizeof(u32)) {
+		(obj->buffer.length == sizeof(u32) ||
+		obj->buffer.length == sizeof(u64))) {
 		devices = *((u32 *) obj->buffer.pointer);
+	} else if (obj->type == ACPI_TYPE_INTEGER) {
+		devices = (u32) obj->integer.value;
 	}
 
 	kfree(out.pointer);
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 60f9cfcac93f..fca3489218b7 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -35,10 +35,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/fs.h>
 #include <linux/dmi.h>
-#include <acpi/acpi_drivers.h>
-#include <linux/sched.h>
+#include <linux/acpi.h>
 #include <linux/thermal.h>
 #include <linux/platform_device.h>
 
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index c53b3ff7978a..d65df92e2acc 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -318,7 +318,7 @@ static int acpi_check_handle(acpi_handle handle, const char *method,
 
 	if (status != AE_OK) {
 		if (ret)
-			pr_warning("Error finding %s\n", method);
+			pr_warn("Error finding %s\n", method);
 		return -ENODEV;
 	}
 	return 0;
@@ -383,7 +383,7 @@ static int asus_kled_lvl(struct asus_laptop *asus)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET,
 				   &params, &kblv);
 	if (ACPI_FAILURE(rv)) {
-		pr_warning("Error reading kled level\n");
+		pr_warn("Error reading kled level\n");
 		return -ENODEV;
 	}
 	return kblv;
@@ -397,7 +397,7 @@ static int asus_kled_set(struct asus_laptop *asus, int kblv)
 		kblv = 0;
 
 	if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) {
-		pr_warning("Keyboard LED display write failed\n");
+		pr_warn("Keyboard LED display write failed\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -531,7 +531,7 @@ static int asus_read_brightness(struct backlight_device *bd)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET,
 				   NULL, &value);
 	if (ACPI_FAILURE(rv))
-		pr_warning("Error reading brightness\n");
+		pr_warn("Error reading brightness\n");
 
 	return value;
 }
@@ -541,7 +541,7 @@ static int asus_set_brightness(struct backlight_device *bd, int value)
 	struct asus_laptop *asus = bl_get_data(bd);
 
 	if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) {
-		pr_warning("Error changing brightness\n");
+		pr_warn("Error changing brightness\n");
 		return -EIO;
 	}
 	return 0;
@@ -730,7 +730,7 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0) {
 		if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
-			pr_warning("LED display write failed\n");
+			pr_warn("LED display write failed\n");
 			return -ENODEV;
 		}
 		asus->ledd_status = (u32) value;
@@ -752,7 +752,7 @@ static int asus_wireless_status(struct asus_laptop *asus, int mask)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS,
 				   NULL, &status);
 	if (ACPI_FAILURE(rv)) {
-		pr_warning("Error reading Wireless status\n");
+		pr_warn("Error reading Wireless status\n");
 		return -EINVAL;
 	}
 	return !!(status & mask);
@@ -764,7 +764,7 @@ static int asus_wireless_status(struct asus_laptop *asus, int mask)
 static int asus_wlan_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) {
-		pr_warning("Error setting wlan status to %d", status);
+		pr_warn("Error setting wlan status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -792,7 +792,7 @@ static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
 static int asus_bluetooth_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) {
-		pr_warning("Error setting bluetooth status to %d", status);
+		pr_warn("Error setting bluetooth status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -821,7 +821,7 @@ static ssize_t store_bluetooth(struct device *dev,
 static int asus_wimax_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
-		pr_warning("Error setting wimax status to %d", status);
+		pr_warn("Error setting wimax status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -850,7 +850,7 @@ static ssize_t store_wimax(struct device *dev,
 static int asus_wwan_set(struct asus_laptop *asus, int status)
 {
 	if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
-		pr_warning("Error setting wwan status to %d", status);
+		pr_warn("Error setting wwan status to %d\n", status);
 		return -EIO;
 	}
 	return 0;
@@ -880,7 +880,7 @@ static void asus_set_display(struct asus_laptop *asus, int value)
 {
 	/* no sanity check needed for now */
 	if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value))
-		pr_warning("Error setting display\n");
+		pr_warn("Error setting display\n");
 	return;
 }
 
@@ -909,7 +909,7 @@ static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
 static void asus_als_switch(struct asus_laptop *asus, int value)
 {
 	if (write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value))
-		pr_warning("Error setting light sensor switch\n");
+		pr_warn("Error setting light sensor switch\n");
 	asus->light_switch = value;
 }
 
@@ -937,7 +937,7 @@ static ssize_t store_lssw(struct device *dev, struct device_attribute *attr,
 static void asus_als_level(struct asus_laptop *asus, int value)
 {
 	if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value))
-		pr_warning("Error setting light sensor level\n");
+		pr_warn("Error setting light sensor level\n");
 	asus->light_level = value;
 }
 
@@ -976,7 +976,7 @@ static int asus_gps_status(struct asus_laptop *asus)
 	rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS,
 				   NULL, &status);
 	if (ACPI_FAILURE(rv)) {
-		pr_warning("Error reading GPS status\n");
+		pr_warn("Error reading GPS status\n");
 		return -ENODEV;
 	}
 	return !!status;
@@ -1284,7 +1284,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 	 */
 	status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info);
 	if (ACPI_FAILURE(status))
-		pr_warning("Couldn't get the DSDT table header\n");
+		pr_warn("Couldn't get the DSDT table header\n");
 
 	/* We have to write 0 on init this far for all ASUS models */
 	if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) {
@@ -1296,7 +1296,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 	status =
 	    acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result);
 	if (ACPI_FAILURE(status))
-		pr_warning("Error calling BSTS\n");
+		pr_warn("Error calling BSTS\n");
 	else if (bsts_result)
 		pr_notice("BSTS called, 0x%02x returned\n",
 		       (uint) bsts_result);
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 832a3fd7c1c8..00460cb9587b 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -425,7 +425,7 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus)
 	if (asus->hotplug_slot) {
 		bus = pci_find_bus(0, 1);
 		if (!bus) {
-			pr_warning("Unable to find PCI bus 1?\n");
+			pr_warn("Unable to find PCI bus 1?\n");
 			goto out_unlock;
 		}
 
@@ -436,12 +436,12 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus)
 		absent = (l == 0xffffffff);
 
 		if (blocked != absent) {
-			pr_warning("BIOS says wireless lan is %s, "
-				   "but the pci device is %s\n",
-				   blocked ? "blocked" : "unblocked",
-				   absent ? "absent" : "present");
-			pr_warning("skipped wireless hotplug as probably "
-				   "inappropriate for this model\n");
+			pr_warn("BIOS says wireless lan is %s, "
+				"but the pci device is %s\n",
+				blocked ? "blocked" : "unblocked",
+				absent ? "absent" : "present");
+			pr_warn("skipped wireless hotplug as probably "
+				"inappropriate for this model\n");
 			goto out_unlock;
 		}
 
@@ -500,7 +500,7 @@ static int asus_register_rfkill_notifier(struct asus_wmi *asus, char *node)
 						     ACPI_SYSTEM_NOTIFY,
 						     asus_rfkill_notify, asus);
 		if (ACPI_FAILURE(status))
-			pr_warning("Failed to register notify on %s\n", node);
+			pr_warn("Failed to register notify on %s\n", node);
 	} else
 		return -ENODEV;
 
@@ -1223,7 +1223,7 @@ static int asus_wmi_sysfs_init(struct platform_device *device)
 /*
  * Platform device
  */
-static int __init asus_wmi_platform_init(struct asus_wmi *asus)
+static int asus_wmi_platform_init(struct asus_wmi *asus)
 {
 	int rv;
 
@@ -1583,12 +1583,12 @@ static int asus_wmi_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!wmi_has_guid(ASUS_WMI_MGMT_GUID)) {
-		pr_warning("Management GUID not found\n");
+		pr_warn("Management GUID not found\n");
 		return -ENODEV;
 	}
 
 	if (wdrv->event_guid && !wmi_has_guid(wdrv->event_guid)) {
-		pr_warning("Event GUID not found\n");
+		pr_warn("Event GUID not found\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index f503607c0645..d9312b3073e5 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -30,6 +30,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -581,8 +583,7 @@ static int read_led(const char *ledname, int ledmask)
 		if (read_acpi_int(NULL, ledname, &led_status))
 			return led_status;
 		else
-			printk(KERN_WARNING "Asus ACPI: Error reading LED "
-			       "status\n");
+			pr_warn("Error reading LED status\n");
 	}
 	return (hotk->status & ledmask) ? 1 : 0;
 }
@@ -621,8 +622,7 @@ write_led(const char __user *buffer, unsigned long count,
 		led_out = !led_out;
 
 	if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
-		printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
-		       ledname);
+		pr_warn("LED (%s) write failed\n", ledname);
 
 	return rv;
 }
@@ -679,8 +679,7 @@ static ssize_t ledd_proc_write(struct file *file, const char __user *buffer,
 	if (rv > 0) {
 		if (!write_acpi_int
 		    (hotk->handle, hotk->methods->mt_ledd, value, NULL))
-			printk(KERN_WARNING
-			       "Asus ACPI: LED display write failed\n");
+			pr_warn("LED display write failed\n");
 		else
 			hotk->ledd_status = (u32) value;
 	}
@@ -838,8 +837,7 @@ static int get_lcd_state(void)
 	} else {
 		/* We don't have to check anything if we are here */
 		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading LCD status\n");
+			pr_warn("Error reading LCD status\n");
 
 		if (hotk->model == L2D)
 			lcd = ~lcd;
@@ -871,7 +869,7 @@ static int set_lcd_state(int value)
 			   the exact behaviour is simulated here */
 		}
 		if (ACPI_FAILURE(status))
-			printk(KERN_WARNING "Asus ACPI: Error switching LCD\n");
+			pr_warn("Error switching LCD\n");
 	}
 	return 0;
 
@@ -915,13 +913,11 @@ static int read_brightness(struct backlight_device *bd)
 	if (hotk->methods->brightness_get) {	/* SPLV/GPLV laptop */
 		if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
 				   &value))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading brightness\n");
+			pr_warn("Error reading brightness\n");
 	} else if (hotk->methods->brightness_status) {	/* For D1 for example */
 		if (!read_acpi_int(NULL, hotk->methods->brightness_status,
 				   &value))
-			printk(KERN_WARNING
-			       "Asus ACPI: Error reading brightness\n");
+			pr_warn("Error reading brightness\n");
 	} else			/* No GPLV method */
 		value = hotk->brightness;
 	return value;
@@ -939,8 +935,7 @@ static int set_brightness(int value)
 	if (hotk->methods->brightness_set) {
 		if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
 				    value, NULL)) {
-			printk(KERN_WARNING
-			       "Asus ACPI: Error changing brightness\n");
+			pr_warn("Error changing brightness\n");
 			ret = -EIO;
 		}
 		goto out;
@@ -955,8 +950,7 @@ static int set_brightness(int value)
 					      NULL, NULL);
 		(value > 0) ? value-- : value++;
 		if (ACPI_FAILURE(status)) {
-			printk(KERN_WARNING
-			       "Asus ACPI: Error changing brightness\n");
+			pr_warn("Error changing brightness\n");
 			ret = -EIO;
 		}
 	}
@@ -1008,7 +1002,7 @@ static void set_display(int value)
 	/* no sanity check needed for now */
 	if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
 			    value, NULL))
-		printk(KERN_WARNING "Asus ACPI: Error setting display\n");
+		pr_warn("Error setting display\n");
 	return;
 }
 
@@ -1021,8 +1015,7 @@ static int disp_proc_show(struct seq_file *m, void *v)
 	int value = 0;
 
 	if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
-		printk(KERN_WARNING
-		       "Asus ACPI: Error reading display status\n");
+		pr_warn("Error reading display status\n");
 	value &= 0x07;	/* needed for some models, shouldn't hurt others */
 	seq_printf(m, "%d\n", value);
 	return 0;
@@ -1068,7 +1061,7 @@ asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode,
 	proc = proc_create_data(name, mode, acpi_device_dir(device),
 				proc_fops, acpi_driver_data(device));
 	if (!proc) {
-		printk(KERN_WARNING "  Unable to create %s fs entry\n", name);
+		pr_warn("  Unable to create %s fs entry\n", name);
 		return -1;
 	}
 	proc->uid = asus_uid;
@@ -1085,8 +1078,8 @@ static int asus_hotk_add_fs(struct acpi_device *device)
 		mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
 	} else {
 		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
-		printk(KERN_WARNING "  asus_uid and asus_gid parameters are "
-		       "deprecated, use chown and chmod instead!\n");
+		pr_warn("  asus_uid and asus_gid parameters are "
+			"deprecated, use chown and chmod instead!\n");
 	}
 
 	acpi_device_dir(device) = asus_proc_dir;
@@ -1099,8 +1092,7 @@ static int asus_hotk_add_fs(struct acpi_device *device)
 		proc->uid = asus_uid;
 		proc->gid = asus_gid;
 	} else {
-		printk(KERN_WARNING "  Unable to create " PROC_INFO
-		       " fs entry\n");
+		pr_warn("  Unable to create " PROC_INFO " fs entry\n");
 	}
 
 	if (hotk->methods->mt_wled) {
@@ -1283,20 +1275,19 @@ static int asus_hotk_get_info(void)
 	 */
 	status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
 	if (ACPI_FAILURE(status))
-		printk(KERN_WARNING "  Couldn't get the DSDT table header\n");
+		pr_warn("  Couldn't get the DSDT table header\n");
 
 	/* We have to write 0 on init this far for all ASUS models */
 	if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
-		printk(KERN_ERR "  Hotkey initialization failed\n");
+		pr_err("  Hotkey initialization failed\n");
 		return -ENODEV;
 	}
 
 	/* This needs to be called for some laptops to init properly */
 	if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result))
-		printk(KERN_WARNING "  Error calling BSTS\n");
+		pr_warn("  Error calling BSTS\n");
 	else if (bsts_result)
-		printk(KERN_NOTICE "  BSTS called, 0x%02x returned\n",
-		       bsts_result);
+		pr_notice("  BSTS called, 0x%02x returned\n", bsts_result);
 
 	/*
 	 * Try to match the object returned by INIT to the specific model.
@@ -1324,23 +1315,21 @@ static int asus_hotk_get_info(void)
 		if (asus_info &&
 		    strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
 			hotk->model = P30;
-			printk(KERN_NOTICE
-			       "  Samsung P30 detected, supported\n");
+			pr_notice("  Samsung P30 detected, supported\n");
 			hotk->methods = &model_conf[hotk->model];
 			kfree(model);
 			return 0;
 		} else {
 			hotk->model = M2E;
-			printk(KERN_NOTICE "  unsupported model %s, trying "
-			       "default values\n", string);
-			printk(KERN_NOTICE
-			       "  send /proc/acpi/dsdt to the developers\n");
+			pr_notice("  unsupported model %s, trying default values\n",
+				  string);
+			pr_notice("  send /proc/acpi/dsdt to the developers\n");
 			kfree(model);
 			return -ENODEV;
 		}
 	}
 	hotk->methods = &model_conf[hotk->model];
-	printk(KERN_NOTICE "  %s model detected, supported\n", string);
+	pr_notice("  %s model detected, supported\n", string);
 
 	/* Sort of per-model blacklist */
 	if (strncmp(string, "L2B", 3) == 0)
@@ -1385,7 +1374,7 @@ static int asus_hotk_check(void)
 	if (hotk->device->status.present) {
 		result = asus_hotk_get_info();
 	} else {
-		printk(KERN_ERR "  Hotkey device not present, aborting\n");
+		pr_err("  Hotkey device not present, aborting\n");
 		return -EINVAL;
 	}
 
@@ -1399,8 +1388,7 @@ static int asus_hotk_add(struct acpi_device *device)
 	acpi_status status = AE_OK;
 	int result;
 
-	printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
-	       ASUS_ACPI_VERSION);
+	pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION);
 
 	hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
 	if (!hotk)
@@ -1428,15 +1416,14 @@ static int asus_hotk_add(struct acpi_device *device)
 		    acpi_evaluate_object(NULL, hotk->methods->brightness_down,
 					 NULL, NULL);
 		if (ACPI_FAILURE(status))
-			printk(KERN_WARNING "  Error changing brightness\n");
+			pr_warn("  Error changing brightness\n");
 		else {
 			status =
 			    acpi_evaluate_object(NULL,
 						 hotk->methods->brightness_up,
 						 NULL, NULL);
 			if (ACPI_FAILURE(status))
-				printk(KERN_WARNING "  Strange, error changing"
-				       " brightness\n");
+				pr_warn("  Strange, error changing brightness\n");
 		}
 	}
 
@@ -1488,7 +1475,7 @@ static int __init asus_acpi_init(void)
 
 	asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
 	if (!asus_proc_dir) {
-		printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n");
+		pr_err("Unable to create /proc entry\n");
 		acpi_bus_unregister_driver(&asus_hotk_driver);
 		return -ENODEV;
 	}
@@ -1513,7 +1500,7 @@ static int __init asus_acpi_init(void)
 							  &asus_backlight_data,
 							  &props);
 	if (IS_ERR(asus_backlight_device)) {
-		printk(KERN_ERR "Could not register asus backlight device\n");
+		pr_err("Could not register asus backlight device\n");
 		asus_backlight_device = NULL;
 		asus_acpi_exit();
 		return -ENODEV;
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index 9b3afb6f0b13..3f204fde1b02 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -68,6 +68,8 @@
  * only enabled on a JHL90 board until it is verified that they work on the
  * other boards too.  See the extra_features variable. */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -760,16 +762,14 @@ static struct rfkill *bt_rfkill;
 
 static int dmi_check_cb(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s'\n",
-		id->ident);
+	pr_info("Identified laptop model '%s'\n", id->ident);
 	extra_features = false;
 	return 1;
 }
 
 static int dmi_check_cb_extra(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s', "
-		"enabling extra features\n",
+	pr_info("Identified laptop model '%s', enabling extra features\n",
 		id->ident);
 	extra_features = true;
 	return 1;
@@ -956,14 +956,12 @@ static int __init compal_init(void)
 	int ret;
 
 	if (acpi_disabled) {
-		printk(KERN_ERR DRIVER_NAME": ACPI needs to be enabled for "
-						"this driver to work!\n");
+		pr_err("ACPI needs to be enabled for this driver to work!\n");
 		return -ENODEV;
 	}
 
 	if (!force && !dmi_check_system(compal_dmi_table)) {
-		printk(KERN_ERR DRIVER_NAME": Motherboard not recognized (You "
-				"could try the module's force-parameter)");
+		pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
 		return -ENODEV;
 	}
 
@@ -998,8 +996,7 @@ static int __init compal_init(void)
 	if (ret)
 		goto err_rfkill;
 
-	printk(KERN_INFO DRIVER_NAME": Driver "DRIVER_VERSION
-						" successfully loaded\n");
+	pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
 	return 0;
 
 err_rfkill:
@@ -1064,7 +1061,7 @@ static void __exit compal_cleanup(void)
 	rfkill_destroy(wifi_rfkill);
 	rfkill_destroy(bt_rfkill);
 
-	printk(KERN_INFO DRIVER_NAME": Driver unloaded\n");
+	pr_info("Driver unloaded\n");
 }
 
 static int __devexit compal_remove(struct platform_device *pdev)
@@ -1074,8 +1071,7 @@ static int __devexit compal_remove(struct platform_device *pdev)
 	if (!extra_features)
 		return 0;
 
-	printk(KERN_INFO DRIVER_NAME": Unloading: resetting fan control "
-							"to motherboard\n");
+	pr_info("Unloading: resetting fan control to motherboard\n");
 	pwm_disable_control();
 
 	data = platform_get_drvdata(pdev);
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index de301aa8e5c3..d3841de6a8cf 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -11,6 +11,8 @@
  *  published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -434,8 +436,7 @@ static int __init dell_setup_rfkill(void)
 	int ret;
 
 	if (dmi_check_system(dell_blacklist)) {
-		printk(KERN_INFO "dell-laptop: Blacklisted hardware detected - "
-				"not enabling rfkill\n");
+		pr_info("Blacklisted hardware detected - not enabling rfkill\n");
 		return 0;
 	}
 
@@ -606,7 +607,7 @@ static int __init dell_init(void)
 	dmi_walk(find_tokens, NULL);
 
 	if (!da_tokens)  {
-		printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n");
+		pr_info("Unable to find dmi tokens\n");
 		return -ENODEV;
 	}
 
@@ -636,14 +637,13 @@ static int __init dell_init(void)
 	ret = dell_setup_rfkill();
 
 	if (ret) {
-		printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n");
+		pr_warn("Unable to setup rfkill\n");
 		goto fail_rfkill;
 	}
 
 	ret = i8042_install_filter(dell_laptop_i8042_filter);
 	if (ret) {
-		printk(KERN_WARNING
-		       "dell-laptop: Unable to install key filter\n");
+		pr_warn("Unable to install key filter\n");
 		goto fail_filter;
 	}
 
diff --git a/drivers/platform/x86/dell-wmi-aio.c b/drivers/platform/x86/dell-wmi-aio.c
index 0ed84573ae1f..3f945457f71c 100644
--- a/drivers/platform/x86/dell-wmi-aio.c
+++ b/drivers/platform/x86/dell-wmi-aio.c
@@ -15,6 +15,7 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
@@ -138,7 +139,7 @@ static int __init dell_wmi_aio_init(void)
 
 	guid = dell_wmi_aio_find();
 	if (!guid) {
-		pr_warning("No known WMI GUID found\n");
+		pr_warn("No known WMI GUID found\n");
 		return -ENXIO;
 	}
 
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 77f1d55414c6..ce790827e199 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -23,6 +23,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -141,7 +143,7 @@ static void dell_wmi_notify(u32 value, void *context)
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status);
+		pr_info("bad event status 0x%x\n", status);
 		return;
 	}
 
@@ -153,8 +155,8 @@ static void dell_wmi_notify(u32 value, void *context)
 		u16 *buffer_entry = (u16 *)obj->buffer.pointer;
 
 		if (dell_new_hk_type && (buffer_entry[1] != 0x10)) {
-			printk(KERN_INFO "dell-wmi: Received unknown WMI event"
-					 " (0x%x)\n", buffer_entry[1]);
+			pr_info("Received unknown WMI event (0x%x)\n",
+				buffer_entry[1]);
 			kfree(obj);
 			return;
 		}
@@ -167,8 +169,7 @@ static void dell_wmi_notify(u32 value, void *context)
 		key = sparse_keymap_entry_from_scancode(dell_wmi_input_dev,
 							reported_key);
 		if (!key) {
-			printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
-				reported_key);
+			pr_info("Unknown key %x pressed\n", reported_key);
 		} else if ((key->keycode == KEY_BRIGHTNESSUP ||
 			    key->keycode == KEY_BRIGHTNESSDOWN) && acpi_video) {
 			/* Don't report brightness notifications that will also
@@ -275,7 +276,7 @@ static int __init dell_wmi_init(void)
 	acpi_status status;
 
 	if (!wmi_has_guid(DELL_EVENT_GUID)) {
-		printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n");
+		pr_warn("No known WMI GUID found\n");
 		return -ENODEV;
 	}
 
@@ -290,9 +291,7 @@ static int __init dell_wmi_init(void)
 					 dell_wmi_notify, NULL);
 	if (ACPI_FAILURE(status)) {
 		dell_wmi_input_destroy();
-		printk(KERN_ERR
-			"dell-wmi: Unable to register notify handler - %d\n",
-			status);
+		pr_err("Unable to register notify handler - %d\n", status);
 		return -ENODEV;
 	}
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 2c1abf63957f..1c45d92e2163 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -228,7 +228,7 @@ static int set_acpi(struct eeepc_laptop *eeepc, int cm, int value)
 		return -ENODEV;
 
 	if (write_acpi_int(eeepc->handle, method, value))
-		pr_warning("Error writing %s\n", method);
+		pr_warn("Error writing %s\n", method);
 	return 0;
 }
 
@@ -243,7 +243,7 @@ static int get_acpi(struct eeepc_laptop *eeepc, int cm)
 		return -ENODEV;
 
 	if (read_acpi_int(eeepc->handle, method, &value))
-		pr_warning("Error reading %s\n", method);
+		pr_warn("Error reading %s\n", method);
 	return value;
 }
 
@@ -261,7 +261,7 @@ static int acpi_setter_handle(struct eeepc_laptop *eeepc, int cm,
 	status = acpi_get_handle(eeepc->handle, (char *)method,
 				 handle);
 	if (status != AE_OK) {
-		pr_warning("Error finding %s\n", method);
+		pr_warn("Error finding %s\n", method);
 		return -ENODEV;
 	}
 	return 0;
@@ -417,7 +417,7 @@ static ssize_t store_cpufv_disabled(struct device *dev,
 	switch (value) {
 	case 0:
 		if (eeepc->cpufv_disabled)
-			pr_warning("cpufv enabled (not officially supported "
+			pr_warn("cpufv enabled (not officially supported "
 				"on this model)\n");
 		eeepc->cpufv_disabled = false;
 		return rv;
@@ -609,7 +609,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
 		bus = port->subordinate;
 
 		if (!bus) {
-			pr_warning("Unable to find PCI bus?\n");
+			pr_warn("Unable to find PCI bus 1?\n");
 			goto out_unlock;
 		}
 
@@ -621,12 +621,12 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle)
 		absent = (l == 0xffffffff);
 
 		if (blocked != absent) {
-			pr_warning("BIOS says wireless lan is %s, "
-					"but the pci device is %s\n",
+			pr_warn("BIOS says wireless lan is %s, "
+				"but the pci device is %s\n",
 				blocked ? "blocked" : "unblocked",
 				absent ? "absent" : "present");
-			pr_warning("skipped wireless hotplug as probably "
-					"inappropriate for this model\n");
+			pr_warn("skipped wireless hotplug as probably "
+				"inappropriate for this model\n");
 			goto out_unlock;
 		}
 
@@ -691,7 +691,8 @@ static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc,
 						     eeepc_rfkill_notify,
 						     eeepc);
 		if (ACPI_FAILURE(status))
-			pr_warning("Failed to register notify on %s\n", node);
+			pr_warn("Failed to register notify on %s\n", node);
+
 		/*
 		 * Refresh pci hotplug in case the rfkill state was
 		 * changed during setup.
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 649dcadd8ea3..4aa867a9b88b 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -84,7 +84,7 @@ static const struct key_entry eeepc_wmi_keymap[] = {
 static acpi_status eeepc_wmi_parse_device(acpi_handle handle, u32 level,
 						 void *context, void **retval)
 {
-	pr_warning("Found legacy ATKD device (%s)", EEEPC_ACPI_HID);
+	pr_warn("Found legacy ATKD device (%s)\n", EEEPC_ACPI_HID);
 	*(bool *)context = true;
 	return AE_CTRL_TERMINATE;
 }
@@ -105,12 +105,12 @@ static int eeepc_wmi_check_atkd(void)
 static int eeepc_wmi_probe(struct platform_device *pdev)
 {
 	if (eeepc_wmi_check_atkd()) {
-		pr_warning("WMI device present, but legacy ATKD device is also "
-			   "present and enabled.");
-		pr_warning("You probably booted with acpi_osi=\"Linux\" or "
-			   "acpi_osi=\"!Windows 2009\"");
-		pr_warning("Can't load eeepc-wmi, use default acpi_osi "
-			   "(preferred) or eeepc-laptop");
+		pr_warn("WMI device present, but legacy ATKD device is also "
+			"present and enabled\n");
+		pr_warn("You probably booted with acpi_osi=\"Linux\" or "
+			"acpi_osi=\"!Windows 2009\"\n");
+		pr_warn("Can't load eeepc-wmi, use default acpi_osi "
+			"(preferred) or eeepc-laptop\n");
 		return -EBUSY;
 	}
 	return 0;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 493054c2dbe1..6b26666b37f2 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -56,6 +56,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -585,8 +587,7 @@ static struct platform_driver fujitsupf_driver = {
 static void dmi_check_cb_common(const struct dmi_system_id *id)
 {
 	acpi_handle handle;
-	printk(KERN_INFO "fujitsu-laptop: Identified laptop model '%s'.\n",
-	       id->ident);
+	pr_info("Identified laptop model '%s'\n", id->ident);
 	if (use_alt_lcd_levels == -1) {
 		if (ACPI_SUCCESS(acpi_get_handle(NULL,
 				"\\_SB.PCI0.LPCB.FJEX.SBL2", &handle)))
@@ -691,11 +692,11 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 
 	result = acpi_bus_update_power(fujitsu->acpi_handle, &state);
 	if (result) {
-		printk(KERN_ERR "Error reading power state\n");
+		pr_err("Error reading power state\n");
 		goto err_unregister_input_dev;
 	}
 
-	printk(KERN_INFO "ACPI: %s [%s] (%s)\n",
+	pr_info("ACPI: %s [%s] (%s)\n",
 	       acpi_device_name(device), acpi_device_bid(device),
 	       !device->power.state ? "on" : "off");
 
@@ -707,7 +708,7 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 		if (ACPI_FAILURE
 		    (acpi_evaluate_object
 		     (device->handle, METHOD_NAME__INI, NULL, NULL)))
-			printk(KERN_ERR "_INI Method failed\n");
+			pr_err("_INI Method failed\n");
 	}
 
 	/* do config (detect defaults) */
@@ -827,7 +828,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 	error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int),
 			GFP_KERNEL);
 	if (error) {
-		printk(KERN_ERR "kfifo_alloc failed\n");
+		pr_err("kfifo_alloc failed\n");
 		goto err_stop;
 	}
 
@@ -859,13 +860,13 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 
 	result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state);
 	if (result) {
-		printk(KERN_ERR "Error reading power state\n");
+		pr_err("Error reading power state\n");
 		goto err_unregister_input_dev;
 	}
 
-	printk(KERN_INFO "ACPI: %s [%s] (%s)\n",
-	       acpi_device_name(device), acpi_device_bid(device),
-	       !device->power.state ? "on" : "off");
+	pr_info("ACPI: %s [%s] (%s)\n",
+		acpi_device_name(device), acpi_device_bid(device),
+		!device->power.state ? "on" : "off");
 
 	fujitsu_hotkey->dev = device;
 
@@ -875,7 +876,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 		if (ACPI_FAILURE
 		    (acpi_evaluate_object
 		     (device->handle, METHOD_NAME__INI, NULL, NULL)))
-			printk(KERN_ERR "_INI Method failed\n");
+			pr_err("_INI Method failed\n");
 	}
 
 	i = 0;
@@ -897,8 +898,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 			call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
 
 	/* Suspect this is a keymap of the application panel, print it */
-	printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
-		call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
+	pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
 
 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 	if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
@@ -907,8 +907,8 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 		if (result == 0) {
 			fujitsu_hotkey->logolamp_registered = 1;
 		} else {
-			printk(KERN_ERR "fujitsu-laptop: Could not register "
-			"LED handler for logo lamp, error %i\n", result);
+			pr_err("Could not register LED handler for logo lamp, error %i\n",
+			       result);
 		}
 	}
 
@@ -919,8 +919,8 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 		if (result == 0) {
 			fujitsu_hotkey->kblamps_registered = 1;
 		} else {
-			printk(KERN_ERR "fujitsu-laptop: Could not register "
-			"LED handler for keyboard lamps, error %i\n", result);
+			pr_err("Could not register LED handler for keyboard lamps, error %i\n",
+			       result);
 		}
 	}
 #endif
@@ -1169,8 +1169,7 @@ static int __init fujitsu_init(void)
 			fujitsu->bl_device->props.power = 0;
 	}
 
-	printk(KERN_INFO "fujitsu-laptop: driver " FUJITSU_DRIVER_VERSION
-	       " successfully loaded.\n");
+	pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n");
 
 	return 0;
 
@@ -1216,7 +1215,7 @@ static void __exit fujitsu_cleanup(void)
 
 	kfree(fujitsu);
 
-	printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n");
+	pr_info("driver unloaded\n");
 }
 
 module_init(fujitsu_init);
diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c
index 067bf36d32f3..5a34973dc164 100644
--- a/drivers/platform/x86/hdaps.c
+++ b/drivers/platform/x86/hdaps.c
@@ -26,6 +26,8 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
@@ -238,7 +240,7 @@ static int hdaps_device_init(void)
 		     __check_latch(0x1611, 0x01))
 		goto out;
 
-	printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x).\n",
+	printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n",
 	       __get_latch(0x1611));
 
 	outb(0x17, 0x1610);
@@ -299,7 +301,7 @@ static int hdaps_probe(struct platform_device *dev)
 	if (ret)
 		return ret;
 
-	printk(KERN_INFO "hdaps: device successfully initialized.\n");
+	pr_info("device successfully initialized\n");
 	return 0;
 }
 
@@ -480,7 +482,7 @@ static struct attribute_group hdaps_attribute_group = {
 /* hdaps_dmi_match - found a match.  return one, short-circuiting the hunt. */
 static int __init hdaps_dmi_match(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
+	pr_info("%s detected\n", id->ident);
 	return 1;
 }
 
@@ -488,8 +490,7 @@ static int __init hdaps_dmi_match(const struct dmi_system_id *id)
 static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id)
 {
 	hdaps_invert = (unsigned long)id->driver_data;
-	printk(KERN_INFO "hdaps: inverting axis (%u) readings.\n",
-	       hdaps_invert);
+	pr_info("inverting axis (%u) readings\n", hdaps_invert);
 	return hdaps_dmi_match(id);
 }
 
@@ -543,7 +544,7 @@ static int __init hdaps_init(void)
 	int ret;
 
 	if (!dmi_check_system(hdaps_whitelist)) {
-		printk(KERN_WARNING "hdaps: supported laptop not found!\n");
+		pr_warn("supported laptop not found!\n");
 		ret = -ENODEV;
 		goto out;
 	}
@@ -595,7 +596,7 @@ static int __init hdaps_init(void)
 	if (ret)
 		goto out_idev;
 
-	printk(KERN_INFO "hdaps: driver successfully loaded.\n");
+	pr_info("driver successfully loaded\n");
 	return 0;
 
 out_idev:
@@ -609,7 +610,7 @@ out_driver:
 out_region:
 	release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
 out:
-	printk(KERN_WARNING "hdaps: driver init failed (ret=%d)!\n", ret);
+	pr_warn("driver init failed (ret=%d)!\n", ret);
 	return ret;
 }
 
@@ -622,7 +623,7 @@ static void __exit hdaps_exit(void)
 	platform_driver_unregister(&hdaps_driver);
 	release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
 
-	printk(KERN_INFO "hdaps: driver unloaded.\n");
+	pr_info("driver unloaded\n");
 }
 
 module_init(hdaps_init);
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1bc4a7539ba9..f94017bcdd6e 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -24,6 +24,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -54,9 +56,6 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_HOTKEY_QUERY 0xc
 #define HPWMI_WIRELESS2_QUERY 0x1b
 
-#define PREFIX "HP WMI: "
-#define UNIMP "Unimplemented "
-
 enum hp_wmi_radio {
 	HPWMI_WIFI = 0,
 	HPWMI_BLUETOOTH = 1,
@@ -228,9 +227,8 @@ static int hp_wmi_perform_query(int query, int write, void *buffer,
 
 	if (bios_return->return_code) {
 		if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE)
-			printk(KERN_WARNING PREFIX "query 0x%x returned "
-						   "error 0x%x\n",
-			       query, bios_return->return_code);
+			pr_warn("query 0x%x returned error 0x%x\n",
+				query, bios_return->return_code);
 		kfree(obj);
 		return bios_return->return_code;
 	}
@@ -384,8 +382,7 @@ static int hp_wmi_rfkill2_refresh(void)
 
 		if (num >= state.count ||
 		    devstate->rfkill_id != rfkill2[i].id) {
-			printk(KERN_WARNING PREFIX "power configuration of "
-			       "the wireless devices unexpectedly changed\n");
+			pr_warn("power configuration of the wireless devices unexpectedly changed\n");
 			continue;
 		}
 
@@ -471,7 +468,7 @@ static void hp_wmi_notify(u32 value, void *context)
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		printk(KERN_INFO PREFIX "bad event status 0x%x\n", status);
+		pr_info("bad event status 0x%x\n", status);
 		return;
 	}
 
@@ -480,8 +477,7 @@ static void hp_wmi_notify(u32 value, void *context)
 	if (!obj)
 		return;
 	if (obj->type != ACPI_TYPE_BUFFER) {
-		printk(KERN_INFO "hp-wmi: Unknown response received %d\n",
-		       obj->type);
+		pr_info("Unknown response received %d\n", obj->type);
 		kfree(obj);
 		return;
 	}
@@ -498,8 +494,7 @@ static void hp_wmi_notify(u32 value, void *context)
 		event_id = *location;
 		event_data = *(location + 2);
 	} else {
-		printk(KERN_INFO "hp-wmi: Unknown buffer length %d\n",
-		       obj->buffer.length);
+		pr_info("Unknown buffer length %d\n", obj->buffer.length);
 		kfree(obj);
 		return;
 	}
@@ -527,8 +522,7 @@ static void hp_wmi_notify(u32 value, void *context)
 
 		if (!sparse_keymap_report_event(hp_wmi_input_dev,
 						key_code, 1, true))
-			printk(KERN_INFO PREFIX "Unknown key code - 0x%x\n",
-			       key_code);
+			pr_info("Unknown key code - 0x%x\n", key_code);
 		break;
 	case HPWMI_WIRELESS:
 		if (rfkill2_count) {
@@ -550,14 +544,12 @@ static void hp_wmi_notify(u32 value, void *context)
 					  hp_wmi_get_hw_state(HPWMI_WWAN));
 		break;
 	case HPWMI_CPU_BATTERY_THROTTLE:
-		printk(KERN_INFO PREFIX UNIMP "CPU throttle because of 3 Cell"
-		       " battery event detected\n");
+		pr_info("Unimplemented CPU throttle because of 3 Cell battery event detected\n");
 		break;
 	case HPWMI_LOCK_SWITCH:
 		break;
 	default:
-		printk(KERN_INFO PREFIX "Unknown event_id - %d - 0x%x\n",
-		       event_id, event_data);
+		pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data);
 		break;
 	}
 }
@@ -705,7 +697,7 @@ static int __devinit hp_wmi_rfkill2_setup(struct platform_device *device)
 		return err;
 
 	if (state.count > HPWMI_MAX_RFKILL2_DEVICES) {
-		printk(KERN_WARNING PREFIX "unable to parse 0x1b query output\n");
+		pr_warn("unable to parse 0x1b query output\n");
 		return -EINVAL;
 	}
 
@@ -727,14 +719,14 @@ static int __devinit hp_wmi_rfkill2_setup(struct platform_device *device)
 			name = "hp-wwan";
 			break;
 		default:
-			printk(KERN_WARNING PREFIX "unknown device type 0x%x\n",
-				 state.device[i].radio_type);
+			pr_warn("unknown device type 0x%x\n",
+				state.device[i].radio_type);
 			continue;
 		}
 
 		if (!state.device[i].vendor_id) {
-			printk(KERN_WARNING PREFIX "zero device %d while %d "
-			       "reported\n", i, state.count);
+			pr_warn("zero device %d while %d reported\n",
+				i, state.count);
 			continue;
 		}
 
@@ -755,8 +747,7 @@ static int __devinit hp_wmi_rfkill2_setup(struct platform_device *device)
 				    IS_HWBLOCKED(state.device[i].power));
 
 		if (!(state.device[i].power & HPWMI_POWER_BIOS))
-			printk(KERN_INFO PREFIX "device %s blocked by BIOS\n",
-			       name);
+			pr_info("device %s blocked by BIOS\n", name);
 
 		err = rfkill_register(rfkill);
 		if (err) {
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index b1396e5b2953..811d436cd677 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -22,6 +22,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -69,9 +71,10 @@ struct ibm_rtl_table {
 #define RTL_SIGNATURE 0x0000005f4c54525fULL
 #define RTL_MASK      0x000000ffffffffffULL
 
-#define RTL_DEBUG(A, ...) do { \
-	if (debug) \
-		pr_info("ibm-rtl: " A, ##__VA_ARGS__ ); \
+#define RTL_DEBUG(fmt, ...)				\
+do {							\
+	if (debug)					\
+		pr_info(fmt, ##__VA_ARGS__);		\
 } while (0)
 
 static DEFINE_MUTEX(rtl_lock);
@@ -114,7 +117,7 @@ static int ibm_rtl_write(u8 value)
 	int ret = 0, count = 0;
 	static u32 cmd_port_val;
 
-	RTL_DEBUG("%s(%d)\n", __FUNCTION__, value);
+	RTL_DEBUG("%s(%d)\n", __func__, value);
 
 	value = value == 1 ? RTL_CMD_ENTER_PRTM : RTL_CMD_EXIT_PRTM;
 
@@ -144,8 +147,8 @@ static int ibm_rtl_write(u8 value)
 		while (ioread8(&rtl_table->command)) {
 			msleep(10);
 			if (count++ > 500) {
-				pr_err("ibm-rtl: Hardware not responding to "
-					"mode switch request\n");
+				pr_err("Hardware not responding to "
+				       "mode switch request\n");
 				ret = -EIO;
 				break;
 			}
@@ -250,7 +253,7 @@ static int __init ibm_rtl_init(void) {
 	int ret = -ENODEV, i;
 
 	if (force)
-		pr_warning("ibm-rtl: module loaded by force\n");
+		pr_warn("module loaded by force\n");
 	/* first ensure that we are running on IBM HW */
 	else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
 		return -ENODEV;
@@ -288,19 +291,19 @@ static int __init ibm_rtl_init(void) {
 		if ((readq(&tmp->signature) & RTL_MASK) == RTL_SIGNATURE) {
 			phys_addr_t addr;
 			unsigned int plen;
-			RTL_DEBUG("found RTL_SIGNATURE at %#llx\n", (u64)tmp);
+			RTL_DEBUG("found RTL_SIGNATURE at %p\n", tmp);
 			rtl_table = tmp;
 			/* The address, value, width and offset are platform
 			 * dependent and found in the ibm_rtl_table */
 			rtl_cmd_width = ioread8(&rtl_table->cmd_granularity);
 			rtl_cmd_type = ioread8(&rtl_table->cmd_address_type);
 			RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
-			      rtl_cmd_width, rtl_cmd_type);
+				  rtl_cmd_width, rtl_cmd_type);
 			addr = ioread32(&rtl_table->cmd_port_address);
 			RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
 			plen = rtl_cmd_width/sizeof(char);
 			rtl_cmd_addr = rtl_port_map(addr, plen);
-			RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
+			RTL_DEBUG("rtl_cmd_addr = %p\n", rtl_cmd_addr);
 			if (!rtl_cmd_addr) {
 				ret = -ENOMEM;
 				break;
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 21b101899bae..bfdda33feb26 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -20,6 +20,8 @@
  *  02110-1301, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index eacd5da7dd24..809adea4965f 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -27,6 +27,8 @@
  *  to get/set bandwidth.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -135,8 +137,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
 	    acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
 				  &temp);
 
-	printk(KERN_INFO
-	       "Bandwidth value was %ld: status is %d\n", state, status);
+	pr_info("Bandwidth value was %ld: status is %d\n", state, status);
 	if (ACPI_FAILURE(status))
 		return -EFAULT;
 
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
index 213e79ba68d5..f1ae5078b7ec 100644
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ b/drivers/platform/x86/intel_mid_powerbtn.c
@@ -23,58 +23,48 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+
 #include <asm/intel_scu_ipc.h>
 
 #define DRIVER_NAME "msic_power_btn"
 
-#define MSIC_IRQ_STAT	0x02
-  #define MSIC_IRQ_PB	(1 << 0)
-#define MSIC_PB_CONFIG	0x3e
 #define MSIC_PB_STATUS	0x3f
-  #define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */
-
-struct mfld_pb_priv {
-	struct input_dev *input;
-	unsigned int irq;
-};
+#define MSIC_PB_LEVEL	(1 << 3) /* 1 - release, 0 - press */
 
 static irqreturn_t mfld_pb_isr(int irq, void *dev_id)
 {
-	struct mfld_pb_priv *priv = dev_id;
+	struct input_dev *input = dev_id;
 	int ret;
 	u8 pbstat;
 
 	ret = intel_scu_ipc_ioread8(MSIC_PB_STATUS, &pbstat);
-	if (ret < 0)
-		return IRQ_HANDLED;
-
-	input_event(priv->input, EV_KEY, KEY_POWER, !(pbstat & MSIC_PB_LEVEL));
-	input_sync(priv->input);
+	if (ret < 0) {
+		dev_err(input->dev.parent, "Read error %d while reading"
+			       " MSIC_PB_STATUS\n", ret);
+	} else {
+		input_event(input, EV_KEY, KEY_POWER,
+			       !(pbstat & MSIC_PB_LEVEL));
+		input_sync(input);
+	}
 
 	return IRQ_HANDLED;
 }
 
 static int __devinit mfld_pb_probe(struct platform_device *pdev)
 {
-	struct mfld_pb_priv *priv;
 	struct input_dev *input;
-	int irq;
+	int irq = platform_get_irq(pdev, 0);
 	int error;
 
-	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return -EINVAL;
 
-	priv = kzalloc(sizeof(struct mfld_pb_priv), GFP_KERNEL);
 	input = input_allocate_device();
-	if (!priv || !input) {
-		error = -ENOMEM;
-		goto err_free_mem;
+	if (!input) {
+		dev_err(&pdev->dev, "Input device allocation error\n");
+		return -ENOMEM;
 	}
 
-	priv->input = input;
-	priv->irq = irq;
-
 	input->name = pdev->name;
 	input->phys = "power-button/input0";
 	input->id.bustype = BUS_HOST;
@@ -82,42 +72,40 @@ static int __devinit mfld_pb_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_KEY, KEY_POWER);
 
-	error = request_threaded_irq(priv->irq, NULL, mfld_pb_isr,
-				     0, DRIVER_NAME, priv);
+	error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0,
+			DRIVER_NAME, input);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to request irq %d for mfld power button\n",
-			irq);
-		goto err_free_mem;
+		dev_err(&pdev->dev, "Unable to request irq %d for mfld power"
+				"button\n", irq);
+		goto err_free_input;
 	}
 
 	error = input_register_device(input);
 	if (error) {
-		dev_err(&pdev->dev,
-			"unable to register input dev, error %d\n", error);
+		dev_err(&pdev->dev, "Unable to register input dev, error "
+				"%d\n", error);
 		goto err_free_irq;
 	}
 
-	platform_set_drvdata(pdev, priv);
+	platform_set_drvdata(pdev, input);
 	return 0;
 
 err_free_irq:
-	free_irq(priv->irq, priv);
-err_free_mem:
+	free_irq(irq, input);
+err_free_input:
 	input_free_device(input);
-	kfree(priv);
 	return error;
 }
 
 static int __devexit mfld_pb_remove(struct platform_device *pdev)
 {
-	struct mfld_pb_priv *priv = platform_get_drvdata(pdev);
-
-	free_irq(priv->irq, priv);
-	input_unregister_device(priv->input);
-	kfree(priv);
+	struct input_dev *input = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
 
+	free_irq(irq, input);
+	input_unregister_device(input);
 	platform_set_drvdata(pdev, NULL);
+
 	return 0;
 }
 
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index c2f4bd8013b5..3a578323122b 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -37,49 +37,50 @@
 #include <asm/intel_scu_ipc.h>
 
 /* Number of thermal sensors */
-#define MSIC_THERMAL_SENSORS   4
+#define MSIC_THERMAL_SENSORS	4
 
 /* ADC1 - thermal registers */
-#define MSIC_THERM_ADC1CNTL1   0x1C0
-#define MSIC_ADC_ENBL          0x10
-#define MSIC_ADC_START         0x08
+#define MSIC_THERM_ADC1CNTL1	0x1C0
+#define MSIC_ADC_ENBL		0x10
+#define MSIC_ADC_START		0x08
 
-#define MSIC_THERM_ADC1CNTL3   0x1C2
-#define MSIC_ADCTHERM_ENBL     0x04
-#define MSIC_ADCRRDATA_ENBL    0x05
-#define MSIC_CHANL_MASK_VAL    0x0F
+#define MSIC_THERM_ADC1CNTL3	0x1C2
+#define MSIC_ADCTHERM_ENBL	0x04
+#define MSIC_ADCRRDATA_ENBL	0x05
+#define MSIC_CHANL_MASK_VAL	0x0F
 
-#define MSIC_STOPBIT_MASK      16
-#define MSIC_ADCTHERM_MASK     4
-#define ADC_CHANLS_MAX         15 /* Number of ADC channels */
-#define ADC_LOOP_MAX           (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
+#define MSIC_STOPBIT_MASK	16
+#define MSIC_ADCTHERM_MASK	4
+/* Number of ADC channels */
+#define ADC_CHANLS_MAX		15
+#define ADC_LOOP_MAX		(ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
 
 /* ADC channel code values */
-#define SKIN_SENSOR0_CODE      0x08
-#define SKIN_SENSOR1_CODE      0x09
-#define SYS_SENSOR_CODE                0x0A
-#define MSIC_DIE_SENSOR_CODE   0x03
+#define SKIN_SENSOR0_CODE	0x08
+#define SKIN_SENSOR1_CODE	0x09
+#define SYS_SENSOR_CODE		0x0A
+#define MSIC_DIE_SENSOR_CODE	0x03
 
-#define SKIN_THERM_SENSOR0     0
-#define SKIN_THERM_SENSOR1     1
-#define SYS_THERM_SENSOR2      2
-#define MSIC_DIE_THERM_SENSOR3 3
+#define SKIN_THERM_SENSOR0	0
+#define SKIN_THERM_SENSOR1	1
+#define SYS_THERM_SENSOR2	2
+#define MSIC_DIE_THERM_SENSOR3	3
 
 /* ADC code range */
-#define ADC_MAX                        977
-#define ADC_MIN                        162
-#define ADC_VAL0C              887
-#define ADC_VAL20C             720
-#define ADC_VAL40C             508
-#define ADC_VAL60C             315
+#define ADC_MAX			977
+#define ADC_MIN			162
+#define ADC_VAL0C		887
+#define ADC_VAL20C		720
+#define ADC_VAL40C		508
+#define ADC_VAL60C		315
 
 /* ADC base addresses */
-#define ADC_CHNL_START_ADDR    0x1C5   /* increments by 1 */
-#define ADC_DATA_START_ADDR     0x1D4   /* increments by 2 */
+#define ADC_CHNL_START_ADDR	0x1C5	/* increments by 1 */
+#define ADC_DATA_START_ADDR	0x1D4	/* increments by 2 */
 
 /* MSIC die attributes */
-#define MSIC_DIE_ADC_MIN       488
-#define MSIC_DIE_ADC_MAX       1004
+#define MSIC_DIE_ADC_MIN	488
+#define MSIC_DIE_ADC_MAX	1004
 
 /* This holds the address of the first free ADC channel,
  * among the 15 channels
@@ -87,15 +88,15 @@
 static int channel_index;
 
 struct platform_info {
-       struct platform_device *pdev;
-       struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
+	struct platform_device *pdev;
+	struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
 };
 
 struct thermal_device_info {
-       unsigned int chnl_addr;
-       int direct;
-       /* This holds the current temperature in millidegree celsius */
-       long curr_temp;
+	unsigned int chnl_addr;
+	int direct;
+	/* This holds the current temperature in millidegree celsius */
+	long curr_temp;
 };
 
 /**
@@ -106,7 +107,7 @@ struct thermal_device_info {
  */
 static int to_msic_die_temp(uint16_t adc_val)
 {
-       return (368 * (adc_val) / 1000) - 220;
+	return (368 * (adc_val) / 1000) - 220;
 }
 
 /**
@@ -118,7 +119,7 @@ static int to_msic_die_temp(uint16_t adc_val)
  */
 static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
 {
-       return (adc_val >= min) && (adc_val <= max);
+	return (adc_val >= min) && (adc_val <= max);
 }
 
 /**
@@ -136,35 +137,35 @@ static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
  */
 static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
 {
-       int temp;
-
-       /* Direct conversion for die temperature */
-       if (direct) {
-               if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
-                       *tp = to_msic_die_temp(adc_val) * 1000;
-                       return 0;
-               }
-               return -ERANGE;
-       }
-
-       if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
-               return -ERANGE;
-
-       /* Linear approximation for skin temperature */
-       if (adc_val > ADC_VAL0C)
-               temp = 177 - (adc_val/5);
-       else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
-               temp = 111 - (adc_val/8);
-       else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
-               temp = 92 - (adc_val/10);
-       else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
-               temp = 91 - (adc_val/10);
-       else
-               temp = 112 - (adc_val/6);
-
-       /* Convert temperature in celsius to milli degree celsius */
-       *tp = temp * 1000;
-       return 0;
+	int temp;
+
+	/* Direct conversion for die temperature */
+	if (direct) {
+		if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
+			*tp = to_msic_die_temp(adc_val) * 1000;
+			return 0;
+		}
+		return -ERANGE;
+	}
+
+	if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
+		return -ERANGE;
+
+	/* Linear approximation for skin temperature */
+	if (adc_val > ADC_VAL0C)
+		temp = 177 - (adc_val/5);
+	else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
+		temp = 111 - (adc_val/8);
+	else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
+		temp = 92 - (adc_val/10);
+	else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
+		temp = 91 - (adc_val/10);
+	else
+		temp = 112 - (adc_val/6);
+
+	/* Convert temperature in celsius to milli degree celsius */
+	*tp = temp * 1000;
+	return 0;
 }
 
 /**
@@ -178,47 +179,47 @@ static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
  */
 static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
 {
-       struct thermal_device_info *td_info = tzd->devdata;
-       uint16_t adc_val, addr;
-       uint8_t data = 0;
-       int ret;
-       unsigned long curr_temp;
-
-
-       addr = td_info->chnl_addr;
-
-       /* Enable the msic for conversion before reading */
-       ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
-       if (ret)
-               return ret;
-
-       /* Re-toggle the RRDATARD bit (temporary workaround) */
-       ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
-       if (ret)
-               return ret;
-
-       /* Read the higher bits of data */
-       ret = intel_scu_ipc_ioread8(addr, &data);
-       if (ret)
-               return ret;
-
-       /* Shift bits to accommodate the lower two data bits */
-       adc_val = (data << 2);
-       addr++;
-
-       ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
-       if (ret)
-               return ret;
-
-       /* Adding lower two bits to the higher bits */
-       data &= 03;
-       adc_val += data;
-
-       /* Convert ADC value to temperature */
-       ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
-       if (ret == 0)
-               *temp = td_info->curr_temp = curr_temp;
-       return ret;
+	struct thermal_device_info *td_info = tzd->devdata;
+	uint16_t adc_val, addr;
+	uint8_t data = 0;
+	int ret;
+	unsigned long curr_temp;
+
+
+	addr = td_info->chnl_addr;
+
+	/* Enable the msic for conversion before reading */
+	ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
+	if (ret)
+		return ret;
+
+	/* Re-toggle the RRDATARD bit (temporary workaround) */
+	ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
+	if (ret)
+		return ret;
+
+	/* Read the higher bits of data */
+	ret = intel_scu_ipc_ioread8(addr, &data);
+	if (ret)
+		return ret;
+
+	/* Shift bits to accommodate the lower two data bits */
+	adc_val = (data << 2);
+	addr++;
+
+	ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
+	if (ret)
+		return ret;
+
+	/* Adding lower two bits to the higher bits */
+	data &= 03;
+	adc_val += data;
+
+	/* Convert ADC value to temperature */
+	ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
+	if (ret == 0)
+		*temp = td_info->curr_temp = curr_temp;
+	return ret;
 }
 
 /**
@@ -231,22 +232,21 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
  */
 static int configure_adc(int val)
 {
-       int ret;
-       uint8_t data;
-
-       ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
-       if (ret)
-               return ret;
-
-       if (val) {
-               /* Enable and start the ADC */
-               data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
-       } else {
-               /* Just stop the ADC */
-               data &= (~MSIC_ADC_START);
-       }
-
-       return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
+	int ret;
+	uint8_t data;
+
+	ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+	if (ret)
+		return ret;
+
+	if (val) {
+		/* Enable and start the ADC */
+		data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
+	} else {
+		/* Just stop the ADC */
+		data &= (~MSIC_ADC_START);
+	}
+	return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
 }
 
 /**
@@ -259,30 +259,30 @@ static int configure_adc(int val)
  */
 static int set_up_therm_channel(u16 base_addr)
 {
-       int ret;
-
-       /* Enable all the sensor channels */
-       ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
-       if (ret)
-               return ret;
-
-       ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
-       if (ret)
-               return ret;
-
-       ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
-       if (ret)
-               return ret;
-
-       /* Since this is the last channel, set the stop bit
-          to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
-       ret = intel_scu_ipc_iowrite8(base_addr + 3,
-                                       (MSIC_DIE_SENSOR_CODE | 0x10));
-       if (ret)
-               return ret;
-
-       /* Enable ADC and start it */
-       return configure_adc(1);
+	int ret;
+
+	/* Enable all the sensor channels */
+	ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
+	if (ret)
+		return ret;
+
+	ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
+	if (ret)
+		return ret;
+
+	ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
+	if (ret)
+		return ret;
+
+	/* Since this is the last channel, set the stop bit
+	 * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
+	ret = intel_scu_ipc_iowrite8(base_addr + 3,
+			(MSIC_DIE_SENSOR_CODE | 0x10));
+	if (ret)
+		return ret;
+
+	/* Enable ADC and start it */
+	return configure_adc(1);
 }
 
 /**
@@ -293,13 +293,13 @@ static int set_up_therm_channel(u16 base_addr)
  */
 static int reset_stopbit(uint16_t addr)
 {
-       int ret;
-       uint8_t data;
-       ret = intel_scu_ipc_ioread8(addr, &data);
-       if (ret)
-               return ret;
-       /* Set the stop bit to zero */
-       return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
+	int ret;
+	uint8_t data;
+	ret = intel_scu_ipc_ioread8(addr, &data);
+	if (ret)
+		return ret;
+	/* Set the stop bit to zero */
+	return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
 }
 
 /**
@@ -317,30 +317,30 @@ static int reset_stopbit(uint16_t addr)
  */
 static int find_free_channel(void)
 {
-       int ret;
-       int i;
-       uint8_t data;
-
-       /* check whether ADC is enabled */
-       ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
-       if (ret)
-               return ret;
-
-       if ((data & MSIC_ADC_ENBL) == 0)
-               return 0;
-
-       /* ADC is already enabled; Looking for an empty channel */
-       for (i = 0; i < ADC_CHANLS_MAX; i++) {
-               ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
-               if (ret)
-                       return ret;
-
-               if (data & MSIC_STOPBIT_MASK) {
-                       ret = i;
-                       break;
-               }
-       }
-       return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
+	int ret;
+	int i;
+	uint8_t data;
+
+	/* check whether ADC is enabled */
+	ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+	if (ret)
+		return ret;
+
+	if ((data & MSIC_ADC_ENBL) == 0)
+		return 0;
+
+	/* ADC is already enabled; Looking for an empty channel */
+	for (i = 0; i < ADC_CHANLS_MAX; i++) {
+		ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
+		if (ret)
+			return ret;
+
+		if (data & MSIC_STOPBIT_MASK) {
+			ret = i;
+			break;
+		}
+	}
+	return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
 }
 
 /**
@@ -351,48 +351,48 @@ static int find_free_channel(void)
  */
 static int mid_initialize_adc(struct device *dev)
 {
-       u8  data;
-       u16 base_addr;
-       int ret;
-
-       /*
-        * Ensure that adctherm is disabled before we
-        * initialize the ADC
-        */
-       ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
-       if (ret)
-               return ret;
-
-       if (data & MSIC_ADCTHERM_MASK)
-               dev_warn(dev, "ADCTHERM already set");
-
-       /* Index of the first channel in which the stop bit is set */
-       channel_index = find_free_channel();
-       if (channel_index < 0) {
-               dev_err(dev, "No free ADC channels");
-               return channel_index;
-       }
-
-       base_addr = ADC_CHNL_START_ADDR + channel_index;
-
-       if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
-               /* Reset stop bit for channels other than 0 and 12 */
-               ret = reset_stopbit(base_addr);
-               if (ret)
-                       return ret;
-
-               /* Index of the first free channel */
-               base_addr++;
-               channel_index++;
-       }
-
-       ret = set_up_therm_channel(base_addr);
-       if (ret) {
-               dev_err(dev, "unable to enable ADC");
-               return ret;
-       }
-       dev_dbg(dev, "ADC initialization successful");
-       return ret;
+	u8  data;
+	u16 base_addr;
+	int ret;
+
+	/*
+	 * Ensure that adctherm is disabled before we
+	 * initialize the ADC
+	 */
+	ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
+	if (ret)
+		return ret;
+
+	if (data & MSIC_ADCTHERM_MASK)
+		dev_warn(dev, "ADCTHERM already set");
+
+	/* Index of the first channel in which the stop bit is set */
+	channel_index = find_free_channel();
+	if (channel_index < 0) {
+		dev_err(dev, "No free ADC channels");
+		return channel_index;
+	}
+
+	base_addr = ADC_CHNL_START_ADDR + channel_index;
+
+	if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
+		/* Reset stop bit for channels other than 0 and 12 */
+		ret = reset_stopbit(base_addr);
+		if (ret)
+			return ret;
+
+		/* Index of the first free channel */
+		base_addr++;
+		channel_index++;
+	}
+
+	ret = set_up_therm_channel(base_addr);
+	if (ret) {
+		dev_err(dev, "unable to enable ADC");
+		return ret;
+	}
+	dev_dbg(dev, "ADC initialization successful");
+	return ret;
 }
 
 /**
@@ -403,18 +403,18 @@ static int mid_initialize_adc(struct device *dev)
  */
 static struct thermal_device_info *initialize_sensor(int index)
 {
-       struct thermal_device_info *td_info =
-               kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
-
-       if (!td_info)
-               return NULL;
-
-       /* Set the base addr of the channel for this sensor */
-       td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
-       /* Sensor 3 is direct conversion */
-       if (index == 3)
-               td_info->direct = 1;
-       return td_info;
+	struct thermal_device_info *td_info =
+		kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
+
+	if (!td_info)
+		return NULL;
+
+	/* Set the base addr of the channel for this sensor */
+	td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
+	/* Sensor 3 is direct conversion */
+	if (index == 3)
+		td_info->direct = 1;
+	return td_info;
 }
 
 /**
@@ -425,7 +425,7 @@ static struct thermal_device_info *initialize_sensor(int index)
  */
 static int mid_thermal_resume(struct platform_device *pdev)
 {
-       return mid_initialize_adc(&pdev->dev);
+	return mid_initialize_adc(&pdev->dev);
 }
 
 /**
@@ -437,12 +437,12 @@ static int mid_thermal_resume(struct platform_device *pdev)
  */
 static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-       /*
-        * This just stops the ADC and does not disable it.
-        * temporary workaround until we have a generic ADC driver.
-        * If 0 is passed, it disables the ADC.
-        */
-       return configure_adc(0);
+	/*
+	 * This just stops the ADC and does not disable it.
+	 * temporary workaround until we have a generic ADC driver.
+	 * If 0 is passed, it disables the ADC.
+	 */
+	return configure_adc(0);
 }
 
 /**
@@ -453,16 +453,15 @@ static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
  */
 static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp)
 {
-       WARN_ON(tzd == NULL);
-       return mid_read_temp(tzd, temp);
+	WARN_ON(tzd == NULL);
+	return mid_read_temp(tzd, temp);
 }
 
 /* Can't be const */
 static struct thermal_zone_device_ops tzd_ops = {
-       .get_temp = read_curr_temp,
+	.get_temp = read_curr_temp,
 };
 
-
 /**
  * mid_thermal_probe - mfld thermal initialize
  * @pdev: platform device structure
@@ -472,46 +471,45 @@ static struct thermal_zone_device_ops tzd_ops = {
  */
 static int mid_thermal_probe(struct platform_device *pdev)
 {
-       static char *name[MSIC_THERMAL_SENSORS] = {
-               "skin0", "skin1", "sys", "msicdie"
-       };
-
-       int ret;
-       int i;
-       struct platform_info *pinfo;
-
-       pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
-       if (!pinfo)
-               return -ENOMEM;
-
-       /* Initializing the hardware */
-       ret = mid_initialize_adc(&pdev->dev);
-       if (ret) {
-               dev_err(&pdev->dev, "ADC init failed");
-               kfree(pinfo);
-               return ret;
-       }
-
-       /* Register each sensor with the generic thermal framework*/
-       for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
-               pinfo->tzd[i] = thermal_zone_device_register(name[i],
-                                       0, initialize_sensor(i),
-                                       &tzd_ops, 0, 0, 0, 0);
-               if (IS_ERR(pinfo->tzd[i]))
-                       goto reg_fail;
-       }
-
-       pinfo->pdev = pdev;
-       platform_set_drvdata(pdev, pinfo);
-       return 0;
+	static char *name[MSIC_THERMAL_SENSORS] = {
+		"skin0", "skin1", "sys", "msicdie"
+	};
+
+	int ret;
+	int i;
+	struct platform_info *pinfo;
+
+	pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	/* Initializing the hardware */
+	ret = mid_initialize_adc(&pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "ADC init failed");
+		kfree(pinfo);
+		return ret;
+	}
+
+	/* Register each sensor with the generic thermal framework*/
+	for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
+		pinfo->tzd[i] = thermal_zone_device_register(name[i],
+				0, initialize_sensor(i), &tzd_ops, 0, 0, 0, 0);
+		if (IS_ERR(pinfo->tzd[i]))
+			goto reg_fail;
+	}
+
+	pinfo->pdev = pdev;
+	platform_set_drvdata(pdev, pinfo);
+	return 0;
 
 reg_fail:
-       ret = PTR_ERR(pinfo->tzd[i]);
-       while (--i >= 0)
-               thermal_zone_device_unregister(pinfo->tzd[i]);
-       configure_adc(0);
-       kfree(pinfo);
-       return ret;
+	ret = PTR_ERR(pinfo->tzd[i]);
+	while (--i >= 0)
+		thermal_zone_device_unregister(pinfo->tzd[i]);
+	configure_adc(0);
+	kfree(pinfo);
+	return ret;
 }
 
 /**
@@ -523,49 +521,46 @@ reg_fail:
  */
 static int mid_thermal_remove(struct platform_device *pdev)
 {
-       int i;
-       struct platform_info *pinfo = platform_get_drvdata(pdev);
+	int i;
+	struct platform_info *pinfo = platform_get_drvdata(pdev);
 
-       for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
-               thermal_zone_device_unregister(pinfo->tzd[i]);
+	for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
+		thermal_zone_device_unregister(pinfo->tzd[i]);
 
-       platform_set_drvdata(pdev, NULL);
+	kfree(pinfo);
+	platform_set_drvdata(pdev, NULL);
 
-       /* Stop the ADC */
-       return configure_adc(0);
+	/* Stop the ADC */
+	return configure_adc(0);
 }
 
-/*********************************************************************
- *             Driver initialisation and finalization
- *********************************************************************/
-
 #define DRIVER_NAME "msic_sensor"
 
 static const struct platform_device_id therm_id_table[] = {
-       { DRIVER_NAME, 1 },
-       { }
+	{ DRIVER_NAME, 1 },
+	{ }
 };
 
 static struct platform_driver mid_thermal_driver = {
-       .driver = {
-               .name = DRIVER_NAME,
-               .owner = THIS_MODULE,
-       },
-       .probe = mid_thermal_probe,
-       .suspend = mid_thermal_suspend,
-       .resume = mid_thermal_resume,
-       .remove = __devexit_p(mid_thermal_remove),
-       .id_table = therm_id_table,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = mid_thermal_probe,
+	.suspend = mid_thermal_suspend,
+	.resume = mid_thermal_resume,
+	.remove = __devexit_p(mid_thermal_remove),
+	.id_table = therm_id_table,
 };
 
 static int __init mid_thermal_module_init(void)
 {
-       return platform_driver_register(&mid_thermal_driver);
+	return platform_driver_register(&mid_thermal_driver);
 }
 
 static void __exit mid_thermal_module_exit(void)
 {
-       platform_driver_unregister(&mid_thermal_driver);
+	platform_driver_unregister(&mid_thermal_driver);
 }
 
 module_init(mid_thermal_module_init);
diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c
new file mode 100644
index 000000000000..e936364a609d
--- /dev/null
+++ b/drivers/platform/x86/intel_oaktrail.c
@@ -0,0 +1,396 @@
+/*
+ * intel_oaktrail.c - Intel OakTrail Platform support.
+ *
+ * Copyright (C) 2010-2011 Intel Corporation
+ * Author: Yin Kangkai (kangkai.yin@intel.com)
+ *
+ * based on Compal driver, Copyright (C) 2008 Cezary Jackiewicz
+ * <cezary.jackiewicz (at) gmail.com>, based on MSI driver
+ * Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ *
+ * This driver does below things:
+ * 1. registers itself in the Linux backlight control in
+ *    /sys/class/backlight/intel_oaktrail/
+ *
+ * 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/
+ *    for these components: wifi, bluetooth, wwan (3g), gps
+ *
+ * This driver might work on other products based on Oaktrail. If you
+ * want to try it you can pass force=1 as argument to the module which
+ * will force it to load even when the DMI data doesn't identify the
+ * product as compatible.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/dmi.h>
+#include <linux/rfkill.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+
+#define DRIVER_NAME	"intel_oaktrail"
+#define DRIVER_VERSION	"0.4ac1"
+
+/*
+ * This is the devices status address in EC space, and the control bits
+ * definition:
+ *
+ * (1 << 0):	Camera enable/disable, RW.
+ * (1 << 1):	Bluetooth enable/disable, RW.
+ * (1 << 2):	GPS enable/disable, RW.
+ * (1 << 3):	WiFi enable/disable, RW.
+ * (1 << 4):	WWAN (3G) enable/disalbe, RW.
+ * (1 << 5):	Touchscreen enable/disable, Read Only.
+ */
+#define OT_EC_DEVICE_STATE_ADDRESS	0xD6
+
+#define OT_EC_CAMERA_MASK	(1 << 0)
+#define OT_EC_BT_MASK		(1 << 1)
+#define OT_EC_GPS_MASK		(1 << 2)
+#define OT_EC_WIFI_MASK		(1 << 3)
+#define OT_EC_WWAN_MASK		(1 << 4)
+#define OT_EC_TS_MASK		(1 << 5)
+
+/*
+ * This is the address in EC space and commands used to control LCD backlight:
+ *
+ * Two steps needed to change the LCD backlight:
+ *   1. write the backlight percentage into OT_EC_BL_BRIGHTNESS_ADDRESS;
+ *   2. write OT_EC_BL_CONTROL_ON_DATA into OT_EC_BL_CONTROL_ADDRESS.
+ *
+ * To read the LCD back light, just read out the value from
+ * OT_EC_BL_BRIGHTNESS_ADDRESS.
+ *
+ * LCD backlight brightness range: 0 - 100 (OT_EC_BL_BRIGHTNESS_MAX)
+ */
+#define OT_EC_BL_BRIGHTNESS_ADDRESS	0x44
+#define OT_EC_BL_BRIGHTNESS_MAX		100
+#define OT_EC_BL_CONTROL_ADDRESS	0x3A
+#define OT_EC_BL_CONTROL_ON_DATA	0x1A
+
+
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
+
+static struct platform_device *oaktrail_device;
+static struct backlight_device *oaktrail_bl_device;
+static struct rfkill *bt_rfkill;
+static struct rfkill *gps_rfkill;
+static struct rfkill *wifi_rfkill;
+static struct rfkill *wwan_rfkill;
+
+
+/* rfkill */
+static int oaktrail_rfkill_set(void *data, bool blocked)
+{
+	u8 value;
+	u8 result;
+	unsigned long radio = (unsigned long) data;
+
+	ec_read(OT_EC_DEVICE_STATE_ADDRESS, &result);
+
+	if (!blocked)
+		value = (u8) (result | radio);
+	else
+		value = (u8) (result & ~radio);
+
+	ec_write(OT_EC_DEVICE_STATE_ADDRESS, value);
+
+	return 0;
+}
+
+static const struct rfkill_ops oaktrail_rfkill_ops = {
+	.set_block = oaktrail_rfkill_set,
+};
+
+static struct rfkill *oaktrail_rfkill_new(char *name, enum rfkill_type type,
+					  unsigned long mask)
+{
+	struct rfkill *rfkill_dev;
+	u8 value;
+	int err;
+
+	rfkill_dev = rfkill_alloc(name, &oaktrail_device->dev, type,
+				  &oaktrail_rfkill_ops, (void *)mask);
+	if (!rfkill_dev)
+		return ERR_PTR(-ENOMEM);
+
+	ec_read(OT_EC_DEVICE_STATE_ADDRESS, &value);
+	rfkill_init_sw_state(rfkill_dev, (value & mask) != 1);
+
+	err = rfkill_register(rfkill_dev);
+	if (err) {
+		rfkill_destroy(rfkill_dev);
+		return ERR_PTR(err);
+	}
+
+	return rfkill_dev;
+}
+
+static inline void __oaktrail_rfkill_cleanup(struct rfkill *rf)
+{
+	if (rf) {
+		rfkill_unregister(rf);
+		rfkill_destroy(rf);
+	}
+}
+
+static void oaktrail_rfkill_cleanup(void)
+{
+	__oaktrail_rfkill_cleanup(wifi_rfkill);
+	__oaktrail_rfkill_cleanup(bt_rfkill);
+	__oaktrail_rfkill_cleanup(gps_rfkill);
+	__oaktrail_rfkill_cleanup(wwan_rfkill);
+}
+
+static int oaktrail_rfkill_init(void)
+{
+	int ret;
+
+	wifi_rfkill = oaktrail_rfkill_new("oaktrail-wifi",
+					  RFKILL_TYPE_WLAN,
+					  OT_EC_WIFI_MASK);
+	if (IS_ERR(wifi_rfkill)) {
+		ret = PTR_ERR(wifi_rfkill);
+		wifi_rfkill = NULL;
+		goto cleanup;
+	}
+
+	bt_rfkill = oaktrail_rfkill_new("oaktrail-bluetooth",
+					RFKILL_TYPE_BLUETOOTH,
+					OT_EC_BT_MASK);
+	if (IS_ERR(bt_rfkill)) {
+		ret = PTR_ERR(bt_rfkill);
+		bt_rfkill = NULL;
+		goto cleanup;
+	}
+
+	gps_rfkill = oaktrail_rfkill_new("oaktrail-gps",
+					 RFKILL_TYPE_GPS,
+					 OT_EC_GPS_MASK);
+	if (IS_ERR(gps_rfkill)) {
+		ret = PTR_ERR(gps_rfkill);
+		gps_rfkill = NULL;
+		goto cleanup;
+	}
+
+	wwan_rfkill = oaktrail_rfkill_new("oaktrail-wwan",
+					  RFKILL_TYPE_WWAN,
+					  OT_EC_WWAN_MASK);
+	if (IS_ERR(wwan_rfkill)) {
+		ret = PTR_ERR(wwan_rfkill);
+		wwan_rfkill = NULL;
+		goto cleanup;
+	}
+
+	return 0;
+
+cleanup:
+	oaktrail_rfkill_cleanup();
+	return ret;
+}
+
+
+/* backlight */
+static int get_backlight_brightness(struct backlight_device *b)
+{
+	u8 value;
+	ec_read(OT_EC_BL_BRIGHTNESS_ADDRESS, &value);
+
+	return value;
+}
+
+static int set_backlight_brightness(struct backlight_device *b)
+{
+	u8 percent = (u8) b->props.brightness;
+	if (percent < 0 || percent > OT_EC_BL_BRIGHTNESS_MAX)
+		return -EINVAL;
+
+	ec_write(OT_EC_BL_BRIGHTNESS_ADDRESS, percent);
+	ec_write(OT_EC_BL_CONTROL_ADDRESS, OT_EC_BL_CONTROL_ON_DATA);
+
+	return 0;
+}
+
+static const struct backlight_ops oaktrail_bl_ops = {
+	.get_brightness = get_backlight_brightness,
+	.update_status	= set_backlight_brightness,
+};
+
+static int oaktrail_backlight_init(void)
+{
+	struct backlight_device *bd;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX;
+	bd = backlight_device_register(DRIVER_NAME,
+				       &oaktrail_device->dev, NULL,
+				       &oaktrail_bl_ops,
+				       &props);
+
+	if (IS_ERR(bd)) {
+		oaktrail_bl_device = NULL;
+		pr_warning("Unable to register backlight device\n");
+		return PTR_ERR(bd);
+	}
+
+	oaktrail_bl_device = bd;
+
+	bd->props.brightness = get_backlight_brightness(bd);
+	bd->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(bd);
+
+	return 0;
+}
+
+static void oaktrail_backlight_exit(void)
+{
+	if (oaktrail_bl_device)
+		backlight_device_unregister(oaktrail_bl_device);
+}
+
+static int __devinit oaktrail_probe(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int __devexit oaktrail_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver oaktrail_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe	= oaktrail_probe,
+	.remove	= __devexit_p(oaktrail_remove)
+};
+
+static int dmi_check_cb(const struct dmi_system_id *id)
+{
+	pr_info("Identified model '%s'\n", id->ident);
+	return 0;
+}
+
+static struct dmi_system_id __initdata oaktrail_dmi_table[] = {
+	{
+		.ident = "OakTrail platform",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "OakTrail platform"),
+		},
+		.callback = dmi_check_cb
+	},
+	{ }
+};
+
+static int __init oaktrail_init(void)
+{
+	int ret;
+
+	if (acpi_disabled) {
+		pr_err("ACPI needs to be enabled for this driver to work!\n");
+		return -ENODEV;
+	}
+
+	if (!force && !dmi_check_system(oaktrail_dmi_table)) {
+		pr_err("Platform not recognized (You could try the module's force-parameter)");
+		return -ENODEV;
+	}
+
+	ret = platform_driver_register(&oaktrail_driver);
+	if (ret) {
+		pr_warning("Unable to register platform driver\n");
+		goto err_driver_reg;
+	}
+
+	oaktrail_device = platform_device_alloc(DRIVER_NAME, -1);
+	if (!oaktrail_device) {
+		pr_warning("Unable to allocate platform device\n");
+		ret = -ENOMEM;
+		goto err_device_alloc;
+	}
+
+	ret = platform_device_add(oaktrail_device);
+	if (ret) {
+		pr_warning("Unable to add platform device\n");
+		goto err_device_add;
+	}
+
+	if (!acpi_video_backlight_support()) {
+		ret = oaktrail_backlight_init();
+		if (ret)
+			goto err_backlight;
+
+	} else
+		pr_info("Backlight controlled by ACPI video driver\n");
+
+	ret = oaktrail_rfkill_init();
+	if (ret) {
+		pr_warning("Setup rfkill failed\n");
+		goto err_rfkill;
+	}
+
+	pr_info("Driver "DRIVER_VERSION" successfully loaded\n");
+	return 0;
+
+err_rfkill:
+	oaktrail_backlight_exit();
+err_backlight:
+	platform_device_del(oaktrail_device);
+err_device_add:
+	platform_device_put(oaktrail_device);
+err_device_alloc:
+	platform_driver_unregister(&oaktrail_driver);
+err_driver_reg:
+
+	return ret;
+}
+
+static void __exit oaktrail_cleanup(void)
+{
+	oaktrail_backlight_exit();
+	oaktrail_rfkill_cleanup();
+	platform_device_unregister(oaktrail_device);
+	platform_driver_unregister(&oaktrail_driver);
+
+	pr_info("Driver unloaded\n");
+}
+
+module_init(oaktrail_init);
+module_exit(oaktrail_cleanup);
+
+MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)");
+MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*:svnIntelCorporation:pnOakTrailplatform:*");
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index 464bb3fc4d88..1686c1e07d5d 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -19,6 +19,8 @@
  * Moorestown platform PMIC chip
  */
 
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
@@ -90,8 +92,7 @@ static void pmic_program_irqtype(int gpio, int type)
 static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 8) {
-		printk(KERN_ERR
-			"%s: only pin 0-7 support input\n", __func__);
+		pr_err("only pin 0-7 support input\n");
 		return -1;/* we only have 8 GPIO can use as input */
 	}
 	return intel_scu_ipc_update_register(GPIO0 + offset,
@@ -116,8 +117,7 @@ static int pmic_gpio_direction_output(struct gpio_chip *chip,
 				value ? 1 << (offset - 16) : 0,
 				1 << (offset - 16));
 	else {
-		printk(KERN_ERR
-			"%s: invalid PMIC GPIO pin %d!\n", __func__, offset);
+		pr_err("invalid PMIC GPIO pin %d!\n", offset);
 		WARN_ON(1);
 	}
 
@@ -260,7 +260,7 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
 	/* setting up SRAM mapping for GPIOINT register */
 	pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8);
 	if (!pg->gpiointr) {
-		printk(KERN_ERR "%s: Can not map GPIOINT.\n", __func__);
+		pr_err("Can not map GPIOINT\n");
 		retval = -EINVAL;
 		goto err2;
 	}
@@ -281,13 +281,13 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
 	pg->chip.dev = dev;
 	retval = gpiochip_add(&pg->chip);
 	if (retval) {
-		printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
+		pr_err("Can not add pmic gpio chip\n");
 		goto err;
 	}
 
 	retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
 	if (retval) {
-		printk(KERN_WARNING "pmic: Interrupt request failed\n");
+		pr_warn("Interrupt request failed\n");
 		goto err;
 	}
 
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 821ad7bc1e26..3ff629df9f01 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -447,7 +447,7 @@ static struct platform_device *msipf_device;
 
 static int dmi_check_cb(const struct dmi_system_id *id)
 {
-	pr_info("Identified laptop model '%s'.\n", id->ident);
+	pr_info("Identified laptop model '%s'\n", id->ident);
 	return 1;
 }
 
@@ -800,7 +800,7 @@ static void msi_laptop_input_destroy(void)
 	input_unregister_device(msi_laptop_input_dev);
 }
 
-static int load_scm_model_init(struct platform_device *sdev)
+static int __init load_scm_model_init(struct platform_device *sdev)
 {
 	u8 data;
 	int result;
@@ -875,8 +875,7 @@ static int __init msi_init(void)
 	/* Register backlight stuff */
 
 	if (acpi_video_backlight_support()) {
-		pr_info("Brightness ignored, must be controlled "
-		       "by ACPI video driver\n");
+		pr_info("Brightness ignored, must be controlled by ACPI video driver\n");
 	} else {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
@@ -930,7 +929,7 @@ static int __init msi_init(void)
 	if (auto_brightness != 2)
 		set_auto_brightness(auto_brightness);
 
-	pr_info("driver "MSI_DRIVER_VERSION" successfully loaded.\n");
+	pr_info("driver " MSI_DRIVER_VERSION " successfully loaded\n");
 
 	return 0;
 
@@ -978,7 +977,7 @@ static void __exit msi_cleanup(void)
 	if (auto_brightness != 2)
 		set_auto_brightness(1);
 
-	pr_info("driver unloaded.\n");
+	pr_info("driver unloaded\n");
 }
 
 module_init(msi_init);
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index d5419c9ec07a..c832e3356cd6 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -20,6 +20,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
 #include <linux/input.h>
@@ -36,13 +37,10 @@ MODULE_ALIAS("wmi:551A1F84-FBDD-4125-91DB-3EA8F44F1D45");
 MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2");
 
 #define DRV_NAME "msi-wmi"
-#define DRV_PFX DRV_NAME ": "
 
 #define MSIWMI_BIOS_GUID "551A1F84-FBDD-4125-91DB-3EA8F44F1D45"
 #define MSIWMI_EVENT_GUID "B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"
 
-#define dprintk(msg...) pr_debug(DRV_PFX msg)
-
 #define SCANCODE_BASE 0xD0
 #define MSI_WMI_BRIGHTNESSUP   SCANCODE_BASE
 #define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
@@ -78,7 +76,7 @@ static int msi_wmi_query_block(int instance, int *ret)
 
 	if (!obj || obj->type != ACPI_TYPE_INTEGER) {
 		if (obj) {
-			printk(KERN_ERR DRV_PFX "query block returned object "
+			pr_err("query block returned object "
 			       "type: %d - buffer length:%d\n", obj->type,
 			       obj->type == ACPI_TYPE_BUFFER ?
 			       obj->buffer.length : 0);
@@ -97,8 +95,8 @@ static int msi_wmi_set_block(int instance, int value)
 
 	struct acpi_buffer input = { sizeof(int), &value };
 
-	dprintk("Going to set block of instance: %d - value: %d\n",
-		instance, value);
+	pr_debug("Going to set block of instance: %d - value: %d\n",
+		 instance, value);
 
 	status = wmi_set_block(MSIWMI_BIOS_GUID, instance, &input);
 
@@ -112,20 +110,19 @@ static int bl_get(struct backlight_device *bd)
 	/* Instance 1 is "get backlight", cmp with DSDT */
 	err = msi_wmi_query_block(1, &ret);
 	if (err) {
-		printk(KERN_ERR DRV_PFX "Could not query backlight: %d\n", err);
+		pr_err("Could not query backlight: %d\n", err);
 		return -EINVAL;
 	}
-	dprintk("Get: Query block returned: %d\n", ret);
+	pr_debug("Get: Query block returned: %d\n", ret);
 	for (level = 0; level < ARRAY_SIZE(backlight_map); level++) {
 		if (backlight_map[level] == ret) {
-			dprintk("Current backlight level: 0x%X - index: %d\n",
-				backlight_map[level], level);
+			pr_debug("Current backlight level: 0x%X - index: %d\n",
+				 backlight_map[level], level);
 			break;
 		}
 	}
 	if (level == ARRAY_SIZE(backlight_map)) {
-		printk(KERN_ERR DRV_PFX "get: Invalid brightness value: 0x%X\n",
-		       ret);
+		pr_err("get: Invalid brightness value: 0x%X\n", ret);
 		return -EINVAL;
 	}
 	return level;
@@ -156,7 +153,7 @@ static void msi_wmi_notify(u32 value, void *context)
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status);
+		pr_info("bad event status 0x%x\n", status);
 		return;
 	}
 
@@ -164,7 +161,7 @@ static void msi_wmi_notify(u32 value, void *context)
 
 	if (obj && obj->type == ACPI_TYPE_INTEGER) {
 		int eventcode = obj->integer.value;
-		dprintk("Eventcode: 0x%x\n", eventcode);
+		pr_debug("Eventcode: 0x%x\n", eventcode);
 		key = sparse_keymap_entry_from_scancode(msi_wmi_input_dev,
 				eventcode);
 		if (key) {
@@ -175,8 +172,8 @@ static void msi_wmi_notify(u32 value, void *context)
 			/* Ignore event if the same event happened in a 50 ms
 			   timeframe -> Key press may result in 10-20 GPEs */
 			if (ktime_to_us(diff) < 1000 * 50) {
-				dprintk("Suppressed key event 0x%X - "
-					"Last press was %lld us ago\n",
+				pr_debug("Suppressed key event 0x%X - "
+					 "Last press was %lld us ago\n",
 					 key->code, ktime_to_us(diff));
 				return;
 			}
@@ -187,17 +184,16 @@ static void msi_wmi_notify(u32 value, void *context)
 			(!acpi_video_backlight_support() ||
 			(key->code != MSI_WMI_BRIGHTNESSUP &&
 			key->code != MSI_WMI_BRIGHTNESSDOWN))) {
-				dprintk("Send key: 0x%X - "
-					"Input layer keycode: %d\n", key->code,
-					 key->keycode);
+				pr_debug("Send key: 0x%X - "
+					 "Input layer keycode: %d\n",
+					 key->code, key->keycode);
 				sparse_keymap_report_entry(msi_wmi_input_dev,
 						key, 1, true);
 			}
 		} else
-			printk(KERN_INFO "Unknown key pressed - %x\n",
-			       eventcode);
+			pr_info("Unknown key pressed - %x\n", eventcode);
 	} else
-		printk(KERN_INFO DRV_PFX "Unknown event received\n");
+		pr_info("Unknown event received\n");
 	kfree(response.pointer);
 }
 
@@ -238,8 +234,7 @@ static int __init msi_wmi_init(void)
 	int err;
 
 	if (!wmi_has_guid(MSIWMI_EVENT_GUID)) {
-		printk(KERN_ERR
-		       "This machine doesn't have MSI-hotkeys through WMI\n");
+		pr_err("This machine doesn't have MSI-hotkeys through WMI\n");
 		return -ENODEV;
 	}
 	err = wmi_install_notify_handler(MSIWMI_EVENT_GUID,
@@ -270,7 +265,7 @@ static int __init msi_wmi_init(void)
 
 		backlight->props.brightness = err;
 	}
-	dprintk("Event handler installed\n");
+	pr_debug("Event handler installed\n");
 
 	return 0;
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 6fe8cd6e23b5..bbd182e178cb 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -42,6 +42,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -70,10 +72,10 @@
 #include <linux/miscdevice.h>
 #endif
 
-#define DRV_PFX			"sony-laptop: "
-#define dprintk(msg...)		do {	\
-	if (debug)			\
-		pr_warn(DRV_PFX msg);	\
+#define dprintk(fmt, ...)			\
+do {						\
+	if (debug)				\
+		pr_warn(fmt, ##__VA_ARGS__);	\
 } while (0)
 
 #define SONY_LAPTOP_DRIVER_VERSION	"0.6"
@@ -418,7 +420,7 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device)
 	error = kfifo_alloc(&sony_laptop_input.fifo,
 			    SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
 	if (error) {
-		pr_err(DRV_PFX "kfifo_alloc failed\n");
+		pr_err("kfifo_alloc failed\n");
 		goto err_dec_users;
 	}
 
@@ -702,7 +704,7 @@ static int acpi_callgetfunc(acpi_handle handle, char *name, int *result)
 		return 0;
 	}
 
-	pr_warn(DRV_PFX "acpi_callreadfunc failed\n");
+	pr_warn("acpi_callreadfunc failed\n");
 
 	return -1;
 }
@@ -728,8 +730,7 @@ static int acpi_callsetfunc(acpi_handle handle, char *name, int value,
 	if (status == AE_OK) {
 		if (result != NULL) {
 			if (out_obj.type != ACPI_TYPE_INTEGER) {
-				pr_warn(DRV_PFX "acpi_evaluate_object bad "
-				       "return type\n");
+				pr_warn("acpi_evaluate_object bad return type\n");
 				return -1;
 			}
 			*result = out_obj.integer.value;
@@ -737,7 +738,7 @@ static int acpi_callsetfunc(acpi_handle handle, char *name, int value,
 		return 0;
 	}
 
-	pr_warn(DRV_PFX "acpi_evaluate_object failed\n");
+	pr_warn("acpi_evaluate_object failed\n");
 
 	return -1;
 }
@@ -961,7 +962,6 @@ static int sony_backlight_get_brightness(struct backlight_device *bd)
 static int sony_nc_get_brightness_ng(struct backlight_device *bd)
 {
 	int result;
-	int *handle = (int *)bl_get_data(bd);
 	struct sony_backlight_props *sdev =
 		(struct sony_backlight_props *)bl_get_data(bd);
 
@@ -973,7 +973,6 @@ static int sony_nc_get_brightness_ng(struct backlight_device *bd)
 static int sony_nc_update_status_ng(struct backlight_device *bd)
 {
 	int value, result;
-	int *handle = (int *)bl_get_data(bd);
 	struct sony_backlight_props *sdev =
 		(struct sony_backlight_props *)bl_get_data(bd);
 
@@ -1104,10 +1103,8 @@ static void sony_nc_notify(struct acpi_device *device, u32 event)
 				}
 
 				if (!key_event->data)
-					pr_info(DRV_PFX
-							"Unknown event: 0x%x 0x%x\n",
-							key_handle,
-							ev);
+					pr_info("Unknown event: 0x%x 0x%x\n",
+						key_handle, ev);
 				else
 					sony_laptop_report_input_event(ev);
 			}
@@ -1128,7 +1125,7 @@ static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
 	struct acpi_device_info *info;
 
 	if (ACPI_SUCCESS(acpi_get_object_info(handle, &info))) {
-		pr_warn(DRV_PFX "method: name: %4.4s, args %X\n",
+		pr_warn("method: name: %4.4s, args %X\n",
 			(char *)&info->name, info->param_count);
 
 		kfree(info);
@@ -1169,7 +1166,7 @@ static int sony_nc_resume(struct acpi_device *device)
 		ret = acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset,
 				       item->value, NULL);
 		if (ret < 0) {
-			pr_err(DRV_PFX "%s: %d\n", __func__, ret);
+			pr_err("%s: %d\n", __func__, ret);
 			break;
 		}
 	}
@@ -1336,12 +1333,12 @@ static void sony_nc_rfkill_setup(struct acpi_device *device)
 
 	device_enum = (union acpi_object *) buffer.pointer;
 	if (!device_enum) {
-		pr_err(DRV_PFX "No SN06 return object.");
+		pr_err("No SN06 return object\n");
 		goto out_no_enum;
 	}
 	if (device_enum->type != ACPI_TYPE_BUFFER) {
-		pr_err(DRV_PFX "Invalid SN06 return object 0x%.2x\n",
-				device_enum->type);
+		pr_err("Invalid SN06 return object 0x%.2x\n",
+		       device_enum->type);
 		goto out_no_enum;
 	}
 
@@ -1662,7 +1659,7 @@ static void sony_nc_backlight_setup(void)
 						      ops, &props);
 
 	if (IS_ERR(sony_bl_props.dev)) {
-		pr_warn(DRV_PFX "unable to register backlight device\n");
+		pr_warn("unable to register backlight device\n");
 		sony_bl_props.dev = NULL;
 	} else
 		sony_bl_props.dev->props.brightness =
@@ -1682,8 +1679,7 @@ static int sony_nc_add(struct acpi_device *device)
 	acpi_handle handle;
 	struct sony_nc_value *item;
 
-	pr_info(DRV_PFX "%s v%s.\n", SONY_NC_DRIVER_NAME,
-			SONY_LAPTOP_DRIVER_VERSION);
+	pr_info("%s v%s\n", SONY_NC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
 
 	sony_nc_acpi_device = device;
 	strcpy(acpi_device_class(device), "sony/hotkey");
@@ -1708,7 +1704,7 @@ static int sony_nc_add(struct acpi_device *device)
 				sony_nc_acpi_handle, 1, sony_walk_callback,
 				NULL, NULL, NULL);
 		if (ACPI_FAILURE(status)) {
-			pr_warn(DRV_PFX "unable to walk acpi resources\n");
+			pr_warn("unable to walk acpi resources\n");
 			result = -ENODEV;
 			goto outpresent;
 		}
@@ -1736,13 +1732,12 @@ static int sony_nc_add(struct acpi_device *device)
 	/* setup input devices and helper fifo */
 	result = sony_laptop_setup_input(device);
 	if (result) {
-		pr_err(DRV_PFX "Unable to create input devices.\n");
+		pr_err("Unable to create input devices\n");
 		goto outkbdbacklight;
 	}
 
 	if (acpi_video_backlight_support()) {
-		pr_info(DRV_PFX "brightness ignored, must be "
-		       "controlled by ACPI video driver\n");
+		pr_info("brightness ignored, must be controlled by ACPI video driver\n");
 	} else {
 		sony_nc_backlight_setup();
 	}
@@ -2265,9 +2260,9 @@ out:
 	if (pcidev)
 		pci_dev_put(pcidev);
 
-	pr_info(DRV_PFX "detected Type%d model\n",
-			dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
-			dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+	pr_info("detected Type%d model\n",
+		dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
+		dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
 }
 
 /* camera tests and poweron/poweroff */
@@ -2313,7 +2308,7 @@ static int __sony_pic_camera_ready(void)
 static int __sony_pic_camera_off(void)
 {
 	if (!camera) {
-		pr_warn(DRV_PFX "camera control not enabled\n");
+		pr_warn("camera control not enabled\n");
 		return -ENODEV;
 	}
 
@@ -2333,7 +2328,7 @@ static int __sony_pic_camera_on(void)
 	int i, j, x;
 
 	if (!camera) {
-		pr_warn(DRV_PFX "camera control not enabled\n");
+		pr_warn("camera control not enabled\n");
 		return -ENODEV;
 	}
 
@@ -2356,7 +2351,7 @@ static int __sony_pic_camera_on(void)
 	}
 
 	if (j == 0) {
-		pr_warn(DRV_PFX "failed to power on camera\n");
+		pr_warn("failed to power on camera\n");
 		return -ENODEV;
 	}
 
@@ -2412,8 +2407,7 @@ int sony_pic_camera_command(int command, u8 value)
 				ITERATIONS_SHORT);
 		break;
 	default:
-		pr_err(DRV_PFX "sony_pic_camera_command invalid: %d\n",
-		       command);
+		pr_err("sony_pic_camera_command invalid: %d\n", command);
 		break;
 	}
 	mutex_unlock(&spic_dev.lock);
@@ -2819,7 +2813,7 @@ static int sonypi_compat_init(void)
 	error =
 	 kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL);
 	if (error) {
-		pr_err(DRV_PFX "kfifo_alloc failed\n");
+		pr_err("kfifo_alloc failed\n");
 		return error;
 	}
 
@@ -2829,12 +2823,12 @@ static int sonypi_compat_init(void)
 		sonypi_misc_device.minor = minor;
 	error = misc_register(&sonypi_misc_device);
 	if (error) {
-		pr_err(DRV_PFX "misc_register failed\n");
+		pr_err("misc_register failed\n");
 		goto err_free_kfifo;
 	}
 	if (minor == -1)
-		pr_info(DRV_PFX "device allocated minor is %d\n",
-		       sonypi_misc_device.minor);
+		pr_info("device allocated minor is %d\n",
+			sonypi_misc_device.minor);
 
 	return 0;
 
@@ -2893,8 +2887,8 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
 			}
 			for (i = 0; i < p->interrupt_count; i++) {
 				if (!p->interrupts[i]) {
-					pr_warn(DRV_PFX "Invalid IRQ %d\n",
-							p->interrupts[i]);
+					pr_warn("Invalid IRQ %d\n",
+						p->interrupts[i]);
 					continue;
 				}
 				interrupt = kzalloc(sizeof(*interrupt),
@@ -2932,14 +2926,14 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
 						ioport->io2.address_length);
 			}
 			else {
-				pr_err(DRV_PFX "Unknown SPIC Type, more than 2 IO Ports\n");
+				pr_err("Unknown SPIC Type, more than 2 IO Ports\n");
 				return AE_ERROR;
 			}
 			return AE_OK;
 		}
 	default:
 		dprintk("Resource %d isn't an IRQ nor an IO port\n",
-				resource->type);
+			resource->type);
 
 	case ACPI_RESOURCE_TYPE_END_TAG:
 		return AE_OK;
@@ -2960,7 +2954,7 @@ static int sony_pic_possible_resources(struct acpi_device *device)
 	dprintk("Evaluating _STA\n");
 	result = acpi_bus_get_status(device);
 	if (result) {
-		pr_warn(DRV_PFX "Unable to read status\n");
+		pr_warn("Unable to read status\n");
 		goto end;
 	}
 
@@ -2976,8 +2970,7 @@ static int sony_pic_possible_resources(struct acpi_device *device)
 	status = acpi_walk_resources(device->handle, METHOD_NAME__PRS,
 			sony_pic_read_possible_resource, &spic_dev);
 	if (ACPI_FAILURE(status)) {
-		pr_warn(DRV_PFX "Failure evaluating %s\n",
-				METHOD_NAME__PRS);
+		pr_warn("Failure evaluating %s\n", METHOD_NAME__PRS);
 		result = -ENODEV;
 	}
 end:
@@ -3090,7 +3083,7 @@ static int sony_pic_enable(struct acpi_device *device,
 
 	/* check for total failure */
 	if (ACPI_FAILURE(status)) {
-		pr_err(DRV_PFX "Error evaluating _SRS\n");
+		pr_err("Error evaluating _SRS\n");
 		result = -ENODEV;
 		goto end;
 	}
@@ -3182,7 +3175,7 @@ static int sony_pic_remove(struct acpi_device *device, int type)
 	struct sony_pic_irq *irq, *tmp_irq;
 
 	if (sony_pic_disable(device)) {
-		pr_err(DRV_PFX "Couldn't disable device.\n");
+		pr_err("Couldn't disable device\n");
 		return -ENXIO;
 	}
 
@@ -3222,8 +3215,7 @@ static int sony_pic_add(struct acpi_device *device)
 	struct sony_pic_ioport *io, *tmp_io;
 	struct sony_pic_irq *irq, *tmp_irq;
 
-	pr_info(DRV_PFX "%s v%s.\n", SONY_PIC_DRIVER_NAME,
-			SONY_LAPTOP_DRIVER_VERSION);
+	pr_info("%s v%s\n", SONY_PIC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
 
 	spic_dev.acpi_dev = device;
 	strcpy(acpi_device_class(device), "sony/hotkey");
@@ -3233,14 +3225,14 @@ static int sony_pic_add(struct acpi_device *device)
 	/* read _PRS resources */
 	result = sony_pic_possible_resources(device);
 	if (result) {
-		pr_err(DRV_PFX "Unable to read possible resources.\n");
+		pr_err("Unable to read possible resources\n");
 		goto err_free_resources;
 	}
 
 	/* setup input devices and helper fifo */
 	result = sony_laptop_setup_input(device);
 	if (result) {
-		pr_err(DRV_PFX "Unable to create input devices.\n");
+		pr_err("Unable to create input devices\n");
 		goto err_free_resources;
 	}
 
@@ -3281,7 +3273,7 @@ static int sony_pic_add(struct acpi_device *device)
 		}
 	}
 	if (!spic_dev.cur_ioport) {
-		pr_err(DRV_PFX "Failed to request_region.\n");
+		pr_err("Failed to request_region\n");
 		result = -ENODEV;
 		goto err_remove_compat;
 	}
@@ -3301,7 +3293,7 @@ static int sony_pic_add(struct acpi_device *device)
 		}
 	}
 	if (!spic_dev.cur_irq) {
-		pr_err(DRV_PFX "Failed to request_irq.\n");
+		pr_err("Failed to request_irq\n");
 		result = -ENODEV;
 		goto err_release_region;
 	}
@@ -3309,7 +3301,7 @@ static int sony_pic_add(struct acpi_device *device)
 	/* set resource status _SRS */
 	result = sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq);
 	if (result) {
-		pr_err(DRV_PFX "Couldn't enable device.\n");
+		pr_err("Couldn't enable device\n");
 		goto err_free_irq;
 	}
 
@@ -3418,7 +3410,7 @@ static int __init sony_laptop_init(void)
 	if (!no_spic && dmi_check_system(sonypi_dmi_table)) {
 		result = acpi_bus_register_driver(&sony_pic_driver);
 		if (result) {
-			pr_err(DRV_PFX "Unable to register SPIC driver.");
+			pr_err("Unable to register SPIC driver\n");
 			goto out;
 		}
 		spic_drv_registered = 1;
@@ -3426,7 +3418,7 @@ static int __init sony_laptop_init(void)
 
 	result = acpi_bus_register_driver(&sony_nc_driver);
 	if (result) {
-		pr_err(DRV_PFX "Unable to register SNC driver.");
+		pr_err("Unable to register SNC driver\n");
 		goto out_unregister_pic;
 	}
 
diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c
index 865ef78d6f1a..e24f5ae475af 100644
--- a/drivers/platform/x86/tc1100-wmi.c
+++ b/drivers/platform/x86/tc1100-wmi.c
@@ -25,6 +25,8 @@
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -40,9 +42,6 @@
 #define TC1100_INSTANCE_WIRELESS		1
 #define TC1100_INSTANCE_JOGDIAL		2
 
-#define TC1100_LOGPREFIX "tc1100-wmi: "
-#define TC1100_INFO KERN_INFO TC1100_LOGPREFIX
-
 MODULE_AUTHOR("Jamey Hicks, Carlos Corbacho");
 MODULE_DESCRIPTION("HP Compaq TC1100 Tablet WMI Extras");
 MODULE_LICENSE("GPL");
@@ -264,7 +263,7 @@ static int __init tc1100_init(void)
 	if (error)
 		goto err_device_del;
 
-	printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras loaded\n");
+	pr_info("HP Compaq TC1100 Tablet WMI Extras loaded\n");
 	return 0;
 
  err_device_del:
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 562fcf0dd2b5..77f6e707a2a9 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,6 +21,8 @@
  *  02110-1301, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define TPACPI_VERSION "0.24"
 #define TPACPI_SYSFS_VERSION 0x020700
 
@@ -224,17 +226,6 @@ enum tpacpi_hkey_event_t {
 
 #define TPACPI_MAX_ACPI_ARGS 3
 
-/* printk headers */
-#define TPACPI_LOG TPACPI_FILE ": "
-#define TPACPI_EMERG	KERN_EMERG	TPACPI_LOG
-#define TPACPI_ALERT	KERN_ALERT	TPACPI_LOG
-#define TPACPI_CRIT	KERN_CRIT	TPACPI_LOG
-#define TPACPI_ERR	KERN_ERR	TPACPI_LOG
-#define TPACPI_WARN	KERN_WARNING	TPACPI_LOG
-#define TPACPI_NOTICE	KERN_NOTICE	TPACPI_LOG
-#define TPACPI_INFO	KERN_INFO	TPACPI_LOG
-#define TPACPI_DEBUG	KERN_DEBUG	TPACPI_LOG
-
 /* Debugging printk groups */
 #define TPACPI_DBG_ALL		0xffff
 #define TPACPI_DBG_DISCLOSETASK	0x8000
@@ -389,34 +380,36 @@ static int tpacpi_uwb_emulstate;
  *  Debugging helpers
  */
 
-#define dbg_printk(a_dbg_level, format, arg...) \
-	do { if (dbg_level & (a_dbg_level)) \
-		printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); \
-	} while (0)
+#define dbg_printk(a_dbg_level, format, arg...)				\
+do {									\
+	if (dbg_level & (a_dbg_level))					\
+		printk(KERN_DEBUG pr_fmt("%s: " format),		\
+		       __func__, ##arg);				\
+} while (0)
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUG
 #define vdbg_printk dbg_printk
 static const char *str_supported(int is_supported);
 #else
-#define vdbg_printk(a_dbg_level, format, arg...) \
-	do { } while (0)
+static inline const char *str_supported(int is_supported) { return ""; }
+#define vdbg_printk(a_dbg_level, format, arg...)	\
+	no_printk(format, ##arg)
 #endif
 
 static void tpacpi_log_usertask(const char * const what)
 {
-	printk(TPACPI_DEBUG "%s: access by process with PID %d\n",
-		what, task_tgid_vnr(current));
+	printk(KERN_DEBUG pr_fmt("%s: access by process with PID %d\n"),
+	       what, task_tgid_vnr(current));
 }
 
-#define tpacpi_disclose_usertask(what, format, arg...) \
-	do { \
-		if (unlikely( \
-		    (dbg_level & TPACPI_DBG_DISCLOSETASK) && \
-		    (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) { \
-			printk(TPACPI_DEBUG "%s: PID %d: " format, \
-				what, task_tgid_vnr(current), ## arg); \
-		} \
-	} while (0)
+#define tpacpi_disclose_usertask(what, format, arg...)			\
+do {									\
+	if (unlikely((dbg_level & TPACPI_DBG_DISCLOSETASK) &&		\
+		     (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) {	\
+		printk(KERN_DEBUG pr_fmt("%s: PID %d: " format),	\
+		       what, task_tgid_vnr(current), ## arg);		\
+	}								\
+} while (0)
 
 /*
  * Quirk handling helpers
@@ -535,15 +528,6 @@ TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY",	/* 600e/x, 770e, 770x */
 	   "HKEY",		/* all others */
 	   );			/* 570 */
 
-TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA",	/* 570 */
-	   "\\_SB.PCI0.AGP0.VID0",	/* 600e/x, 770x */
-	   "\\_SB.PCI0.VID0",	/* 770e */
-	   "\\_SB.PCI0.VID",	/* A21e, G4x, R50e, X30, X40 */
-	   "\\_SB.PCI0.AGP.VGA",	/* X100e and a few others */
-	   "\\_SB.PCI0.AGP.VID",	/* all others */
-	   );				/* R30, R31 */
-
-
 /*************************************************************************
  * ACPI helpers
  */
@@ -563,7 +547,7 @@ static int acpi_evalf(acpi_handle handle,
 	int quiet;
 
 	if (!*fmt) {
-		printk(TPACPI_ERR "acpi_evalf() called with empty format\n");
+		pr_err("acpi_evalf() called with empty format\n");
 		return 0;
 	}
 
@@ -588,7 +572,7 @@ static int acpi_evalf(acpi_handle handle,
 			break;
 			/* add more types as needed */
 		default:
-			printk(TPACPI_ERR "acpi_evalf() called "
+			pr_err("acpi_evalf() called "
 			       "with invalid format character '%c'\n", c);
 			va_end(ap);
 			return 0;
@@ -617,13 +601,13 @@ static int acpi_evalf(acpi_handle handle,
 		break;
 		/* add more types as needed */
 	default:
-		printk(TPACPI_ERR "acpi_evalf() called "
+		pr_err("acpi_evalf() called "
 		       "with invalid format character '%c'\n", res_type);
 		return 0;
 	}
 
 	if (!success && !quiet)
-		printk(TPACPI_ERR "acpi_evalf(%s, %s, ...) failed: %s\n",
+		pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",
 		       method, fmt0, acpi_format_exception(status));
 
 	return success;
@@ -767,8 +751,7 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm)
 
 	rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device);
 	if (rc < 0) {
-		printk(TPACPI_ERR "acpi_bus_get_device(%s) failed: %d\n",
-			ibm->name, rc);
+		pr_err("acpi_bus_get_device(%s) failed: %d\n", ibm->name, rc);
 		return -ENODEV;
 	}
 
@@ -781,12 +764,10 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm)
 			ibm->acpi->type, dispatch_acpi_notify, ibm);
 	if (ACPI_FAILURE(status)) {
 		if (status == AE_ALREADY_EXISTS) {
-			printk(TPACPI_NOTICE
-			       "another device driver is already "
-			       "handling %s events\n", ibm->name);
+			pr_notice("another device driver is already "
+				  "handling %s events\n", ibm->name);
 		} else {
-			printk(TPACPI_ERR
-			       "acpi_install_notify_handler(%s) failed: %s\n",
+			pr_err("acpi_install_notify_handler(%s) failed: %s\n",
 			       ibm->name, acpi_format_exception(status));
 		}
 		return -ENODEV;
@@ -811,8 +792,7 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
 
 	ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
 	if (!ibm->acpi->driver) {
-		printk(TPACPI_ERR
-		       "failed to allocate memory for ibm->acpi->driver\n");
+		pr_err("failed to allocate memory for ibm->acpi->driver\n");
 		return -ENOMEM;
 	}
 
@@ -823,7 +803,7 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
 
 	rc = acpi_bus_register_driver(ibm->acpi->driver);
 	if (rc < 0) {
-		printk(TPACPI_ERR "acpi_bus_register_driver(%s) failed: %d\n",
+		pr_err("acpi_bus_register_driver(%s) failed: %d\n",
 		       ibm->name, rc);
 		kfree(ibm->acpi->driver);
 		ibm->acpi->driver = NULL;
@@ -1081,15 +1061,14 @@ static int parse_strtoul(const char *buf,
 static void tpacpi_disable_brightness_delay(void)
 {
 	if (acpi_evalf(hkey_handle, NULL, "PWMS", "qvd", 0))
-		printk(TPACPI_NOTICE
-			"ACPI backlight control delay disabled\n");
+		pr_notice("ACPI backlight control delay disabled\n");
 }
 
 static void printk_deprecated_attribute(const char * const what,
 					const char * const details)
 {
 	tpacpi_log_usertask("deprecated sysfs attribute");
-	printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and "
+	pr_warn("WARNING: sysfs attribute %s is deprecated and "
 		"will be removed. %s\n",
 		what, details);
 }
@@ -1264,8 +1243,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
 						&tpacpi_rfk_rfkill_ops,
 						atp_rfk);
 	if (!atp_rfk || !atp_rfk->rfkill) {
-		printk(TPACPI_ERR
-			"failed to allocate memory for rfkill class\n");
+		pr_err("failed to allocate memory for rfkill class\n");
 		kfree(atp_rfk);
 		return -ENOMEM;
 	}
@@ -1275,9 +1253,8 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
 
 	sw_status = (tp_rfkops->get_status)();
 	if (sw_status < 0) {
-		printk(TPACPI_ERR
-			"failed to read initial state for %s, error %d\n",
-			name, sw_status);
+		pr_err("failed to read initial state for %s, error %d\n",
+		       name, sw_status);
 	} else {
 		sw_state = (sw_status == TPACPI_RFK_RADIO_OFF);
 		if (set_default) {
@@ -1291,9 +1268,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
 
 	res = rfkill_register(atp_rfk->rfkill);
 	if (res < 0) {
-		printk(TPACPI_ERR
-			"failed to register %s rfkill switch: %d\n",
-			name, res);
+		pr_err("failed to register %s rfkill switch: %d\n", name, res);
 		rfkill_destroy(atp_rfk->rfkill);
 		kfree(atp_rfk);
 		return res;
@@ -1301,7 +1276,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
 
 	tpacpi_rfkill_switches[id] = atp_rfk;
 
-	printk(TPACPI_INFO "rfkill switch %s: radio is %sblocked\n",
+	pr_info("rfkill switch %s: radio is %sblocked\n",
 		name, (sw_state || hw_state) ? "" : "un");
 	return 0;
 }
@@ -1825,10 +1800,8 @@ static void __init tpacpi_check_outdated_fw(void)
 		 * broken, or really stable to begin with, so it is
 		 * best if the user upgrades the firmware anyway.
 		 */
-		printk(TPACPI_WARN
-			"WARNING: Outdated ThinkPad BIOS/EC firmware\n");
-		printk(TPACPI_WARN
-			"WARNING: This firmware may be missing critical bug "
+		pr_warn("WARNING: Outdated ThinkPad BIOS/EC firmware\n");
+		pr_warn("WARNING: This firmware may be missing critical bug "
 			"fixes and/or important features\n");
 	}
 }
@@ -2117,9 +2090,7 @@ void static hotkey_mask_warn_incomplete_mask(void)
 		(hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK);
 
 	if (wantedmask)
-		printk(TPACPI_NOTICE
-			"required events 0x%08x not enabled!\n",
-			wantedmask);
+		pr_notice("required events 0x%08x not enabled!\n", wantedmask);
 }
 
 /*
@@ -2157,10 +2128,9 @@ static int hotkey_mask_set(u32 mask)
 	 * a given event.
 	 */
 	if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) {
-		printk(TPACPI_NOTICE
-		       "asked for hotkey mask 0x%08x, but "
-		       "firmware forced it to 0x%08x\n",
-		       fwmask, hotkey_acpi_mask);
+		pr_notice("asked for hotkey mask 0x%08x, but "
+			  "firmware forced it to 0x%08x\n",
+			  fwmask, hotkey_acpi_mask);
 	}
 
 	if (tpacpi_lifecycle != TPACPI_LIFE_EXITING)
@@ -2184,13 +2154,11 @@ static int hotkey_user_mask_set(const u32 mask)
 	    (mask == 0xffff || mask == 0xffffff ||
 	     mask == 0xffffffff)) {
 		tp_warned.hotkey_mask_ff = 1;
-		printk(TPACPI_NOTICE
-		       "setting the hotkey mask to 0x%08x is likely "
-		       "not the best way to go about it\n", mask);
-		printk(TPACPI_NOTICE
-		       "please consider using the driver defaults, "
-		       "and refer to up-to-date thinkpad-acpi "
-		       "documentation\n");
+		pr_notice("setting the hotkey mask to 0x%08x is likely "
+			  "not the best way to go about it\n", mask);
+		pr_notice("please consider using the driver defaults, "
+			  "and refer to up-to-date thinkpad-acpi "
+			  "documentation\n");
 	}
 
 	/* Try to enable what the user asked for, plus whatever we need.
@@ -2574,8 +2542,7 @@ static void hotkey_poll_setup(const bool may_warn)
 					NULL, TPACPI_NVRAM_KTHREAD_NAME);
 			if (IS_ERR(tpacpi_hotkey_task)) {
 				tpacpi_hotkey_task = NULL;
-				printk(TPACPI_ERR
-				       "could not create kernel thread "
+				pr_err("could not create kernel thread "
 				       "for hotkey polling\n");
 			}
 		}
@@ -2583,11 +2550,10 @@ static void hotkey_poll_setup(const bool may_warn)
 		hotkey_poll_stop_sync();
 		if (may_warn && (poll_driver_mask || poll_user_mask) &&
 		    hotkey_poll_freq == 0) {
-			printk(TPACPI_NOTICE
-				"hot keys 0x%08x and/or events 0x%08x "
-				"require polling, which is currently "
-				"disabled\n",
-				poll_user_mask, poll_driver_mask);
+			pr_notice("hot keys 0x%08x and/or events 0x%08x "
+				  "require polling, which is currently "
+				  "disabled\n",
+				  poll_user_mask, poll_driver_mask);
 		}
 	}
 }
@@ -2811,13 +2777,13 @@ static ssize_t hotkey_source_mask_store(struct device *dev,
 	mutex_unlock(&hotkey_mutex);
 
 	if (rc < 0)
-		printk(TPACPI_ERR "hotkey_source_mask: failed to update the"
-			"firmware event mask!\n");
+		pr_err("hotkey_source_mask: "
+		       "failed to update the firmware event mask!\n");
 
 	if (r_ev)
-		printk(TPACPI_NOTICE "hotkey_source_mask: "
-			"some important events were disabled: "
-			"0x%04x\n", r_ev);
+		pr_notice("hotkey_source_mask: "
+			  "some important events were disabled: 0x%04x\n",
+			  r_ev);
 
 	tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t);
 
@@ -3048,8 +3014,7 @@ static void hotkey_exit(void)
 	if (((tp_features.hotkey_mask &&
 	      hotkey_mask_set(hotkey_orig_mask)) |
 	     hotkey_status_set(false)) != 0)
-		printk(TPACPI_ERR
-		       "failed to restore hot key mask "
+		pr_err("failed to restore hot key mask "
 		       "to BIOS defaults\n");
 }
 
@@ -3288,10 +3253,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	   for HKEY interface version 0x100 */
 	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
 		if ((hkeyv >> 8) != 1) {
-			printk(TPACPI_ERR "unknown version of the "
-			       "HKEY interface: 0x%x\n", hkeyv);
-			printk(TPACPI_ERR "please report this to %s\n",
-			       TPACPI_MAIL);
+			pr_err("unknown version of the HKEY interface: 0x%x\n",
+			       hkeyv);
+			pr_err("please report this to %s\n", TPACPI_MAIL);
 		} else {
 			/*
 			 * MHKV 0x100 in A31, R40, R40e,
@@ -3304,8 +3268,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 			/* Paranoia check AND init hotkey_all_mask */
 			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
 					"MHKA", "qd")) {
-				printk(TPACPI_ERR
-				       "missing MHKA handler, "
+				pr_err("missing MHKA handler, "
 				       "please report this to %s\n",
 				       TPACPI_MAIL);
 				/* Fallback: pre-init for FN+F3,F4,F12 */
@@ -3343,16 +3306,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	if (dbg_wlswemul) {
 		tp_features.hotkey_wlsw = 1;
 		radiosw_state = !!tpacpi_wlsw_emulstate;
-		printk(TPACPI_INFO
-			"radio switch emulation enabled\n");
+		pr_info("radio switch emulation enabled\n");
 	} else
 #endif
 	/* Not all thinkpads have a hardware radio switch */
 	if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
 		tp_features.hotkey_wlsw = 1;
 		radiosw_state = !!status;
-		printk(TPACPI_INFO
-			"radio switch found; radios are %s\n",
+		pr_info("radio switch found; radios are %s\n",
 			enabled(status, 0));
 	}
 	if (tp_features.hotkey_wlsw)
@@ -3363,8 +3324,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
 		tp_features.hotkey_tablet = 1;
 		tabletsw_state = !!(status & TP_HOTKEY_TABLET_MASK);
-		printk(TPACPI_INFO
-			"possible tablet mode switch found; "
+		pr_info("possible tablet mode switch found; "
 			"ThinkPad in %s mode\n",
 			(tabletsw_state) ? "tablet" : "laptop");
 		res = add_to_attr_set(hotkey_dev_attributes,
@@ -3382,8 +3342,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
 					GFP_KERNEL);
 	if (!hotkey_keycode_map) {
-		printk(TPACPI_ERR
-			"failed to allocate memory for key map\n");
+		pr_err("failed to allocate memory for key map\n");
 		res = -ENOMEM;
 		goto err_exit;
 	}
@@ -3426,13 +3385,11 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	 * userspace. tpacpi_detect_brightness_capabilities() must have
 	 * been called before this point  */
 	if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
-		printk(TPACPI_INFO
-		       "This ThinkPad has standard ACPI backlight "
-		       "brightness control, supported by the ACPI "
-		       "video driver\n");
-		printk(TPACPI_NOTICE
-		       "Disabling thinkpad-acpi brightness events "
-		       "by default...\n");
+		pr_info("This ThinkPad has standard ACPI backlight "
+			"brightness control, supported by the ACPI "
+			"video driver\n");
+		pr_notice("Disabling thinkpad-acpi brightness events "
+			  "by default...\n");
 
 		/* Disable brightness up/down on Lenovo thinkpads when
 		 * ACPI is handling them, otherwise it is plain impossible
@@ -3539,8 +3496,7 @@ static bool hotkey_notify_wakeup(const u32 hkey,
 
 	case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */
 	case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */
-		printk(TPACPI_ALERT
-			"EMERGENCY WAKEUP: battery almost empty\n");
+		pr_alert("EMERGENCY WAKEUP: battery almost empty\n");
 		/* how to auto-heal: */
 		/* 2313: woke up from S3, go to S4/S5 */
 		/* 2413: woke up from S4, go to S5 */
@@ -3551,9 +3507,7 @@ static bool hotkey_notify_wakeup(const u32 hkey,
 	}
 
 	if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
-		printk(TPACPI_INFO
-		       "woke up due to a hot-unplug "
-		       "request...\n");
+		pr_info("woke up due to a hot-unplug request...\n");
 		hotkey_wakeup_reason_notify_change();
 	}
 	return true;
@@ -3605,37 +3559,31 @@ static bool hotkey_notify_thermal(const u32 hkey,
 
 	switch (hkey) {
 	case TP_HKEY_EV_THM_TABLE_CHANGED:
-		printk(TPACPI_INFO
-			"EC reports that Thermal Table has changed\n");
+		pr_info("EC reports that Thermal Table has changed\n");
 		/* recommended action: do nothing, we don't have
 		 * Lenovo ATM information */
 		return true;
 	case TP_HKEY_EV_ALARM_BAT_HOT:
-		printk(TPACPI_CRIT
-			"THERMAL ALARM: battery is too hot!\n");
+		pr_crit("THERMAL ALARM: battery is too hot!\n");
 		/* recommended action: warn user through gui */
 		break;
 	case TP_HKEY_EV_ALARM_BAT_XHOT:
-		printk(TPACPI_ALERT
-			"THERMAL EMERGENCY: battery is extremely hot!\n");
+		pr_alert("THERMAL EMERGENCY: battery is extremely hot!\n");
 		/* recommended action: immediate sleep/hibernate */
 		break;
 	case TP_HKEY_EV_ALARM_SENSOR_HOT:
-		printk(TPACPI_CRIT
-			"THERMAL ALARM: "
+		pr_crit("THERMAL ALARM: "
 			"a sensor reports something is too hot!\n");
 		/* recommended action: warn user through gui, that */
 		/* some internal component is too hot */
 		break;
 	case TP_HKEY_EV_ALARM_SENSOR_XHOT:
-		printk(TPACPI_ALERT
-			"THERMAL EMERGENCY: "
-			"a sensor reports something is extremely hot!\n");
+		pr_alert("THERMAL EMERGENCY: "
+			 "a sensor reports something is extremely hot!\n");
 		/* recommended action: immediate sleep/hibernate */
 		break;
 	default:
-		printk(TPACPI_ALERT
-			 "THERMAL ALERT: unknown thermal alarm received\n");
+		pr_alert("THERMAL ALERT: unknown thermal alarm received\n");
 		known = false;
 	}
 
@@ -3652,8 +3600,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 	bool known_ev;
 
 	if (event != 0x80) {
-		printk(TPACPI_ERR
-		       "unknown HKEY notification event %d\n", event);
+		pr_err("unknown HKEY notification event %d\n", event);
 		/* forward it to userspace, maybe it knows how to handle it */
 		acpi_bus_generate_netlink_event(
 					ibm->acpi->device->pnp.device_class,
@@ -3664,7 +3611,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 
 	while (1) {
 		if (!acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) {
-			printk(TPACPI_ERR "failed to retrieve HKEY event\n");
+			pr_err("failed to retrieve HKEY event\n");
 			return;
 		}
 
@@ -3692,8 +3639,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 			switch (hkey) {
 			case TP_HKEY_EV_BAYEJ_ACK:
 				hotkey_autosleep_ack = 1;
-				printk(TPACPI_INFO
-				       "bay ejected\n");
+				pr_info("bay ejected\n");
 				hotkey_wakeup_hotunplug_complete_notify_change();
 				known_ev = true;
 				break;
@@ -3709,8 +3655,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 			/* 0x4000-0x4FFF: dock-related wakeups */
 			if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
 				hotkey_autosleep_ack = 1;
-				printk(TPACPI_INFO
-				       "undocked\n");
+				pr_info("undocked\n");
 				hotkey_wakeup_hotunplug_complete_notify_change();
 				known_ev = true;
 			} else {
@@ -3741,11 +3686,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 			known_ev = false;
 		}
 		if (!known_ev) {
-			printk(TPACPI_NOTICE
-			       "unhandled HKEY event 0x%04x\n", hkey);
-			printk(TPACPI_NOTICE
-			       "please report the conditions when this "
-			       "event happened to %s\n", TPACPI_MAIL);
+			pr_notice("unhandled HKEY event 0x%04x\n", hkey);
+			pr_notice("please report the conditions when this "
+				  "event happened to %s\n", TPACPI_MAIL);
 		}
 
 		/* Legacy events */
@@ -3778,8 +3721,7 @@ static void hotkey_resume(void)
 
 	if (hotkey_status_set(true) < 0 ||
 	    hotkey_mask_set(hotkey_acpi_mask) < 0)
-		printk(TPACPI_ERR
-		       "error while attempting to reset the event "
+		pr_err("error while attempting to reset the event "
 		       "firmware interface\n");
 
 	tpacpi_send_radiosw_update();
@@ -3824,14 +3766,12 @@ static void hotkey_enabledisable_warn(bool enable)
 {
 	tpacpi_log_usertask("procfs hotkey enable/disable");
 	if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
-			TPACPI_WARN
-			"hotkey enable/disable functionality has been "
-			"removed from the driver.  Hotkeys are always "
-			"enabled\n"))
-		printk(TPACPI_ERR
-			"Please remove the hotkey=enable module "
-			"parameter, it is deprecated.  Hotkeys are always "
-			"enabled\n");
+		  pr_fmt("hotkey enable/disable functionality has been "
+			 "removed from the driver.  "
+			 "Hotkeys are always enabled.\n")))
+		pr_err("Please remove the hotkey=enable module "
+		       "parameter, it is deprecated.  "
+		       "Hotkeys are always enabled.\n");
 }
 
 static int hotkey_write(char *buf)
@@ -4011,8 +3951,7 @@ static void bluetooth_shutdown(void)
 	/* Order firmware to save current state to NVRAM */
 	if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd",
 			TP_ACPI_BLTH_SAVE_STATE))
-		printk(TPACPI_NOTICE
-			"failed to save bluetooth state to NVRAM\n");
+		pr_notice("failed to save bluetooth state to NVRAM\n");
 	else
 		vdbg_printk(TPACPI_DBG_RFKILL,
 			"bluestooth state saved to NVRAM\n");
@@ -4051,8 +3990,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_bluetoothemul) {
 		tp_features.bluetooth = 1;
-		printk(TPACPI_INFO
-			"bluetooth switch emulation enabled\n");
+		pr_info("bluetooth switch emulation enabled\n");
 	} else
 #endif
 	if (tp_features.bluetooth &&
@@ -4203,8 +4141,7 @@ static void wan_shutdown(void)
 	/* Order firmware to save current state to NVRAM */
 	if (!acpi_evalf(NULL, NULL, "\\WGSV", "vd",
 			TP_ACPI_WGSV_SAVE_STATE))
-		printk(TPACPI_NOTICE
-			"failed to save WWAN state to NVRAM\n");
+		pr_notice("failed to save WWAN state to NVRAM\n");
 	else
 		vdbg_printk(TPACPI_DBG_RFKILL,
 			"WWAN state saved to NVRAM\n");
@@ -4241,8 +4178,7 @@ static int __init wan_init(struct ibm_init_struct *iibm)
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_wwanemul) {
 		tp_features.wan = 1;
-		printk(TPACPI_INFO
-			"wwan switch emulation enabled\n");
+		pr_info("wwan switch emulation enabled\n");
 	} else
 #endif
 	if (tp_features.wan &&
@@ -4382,8 +4318,7 @@ static int __init uwb_init(struct ibm_init_struct *iibm)
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
 	if (dbg_uwbemul) {
 		tp_features.uwb = 1;
-		printk(TPACPI_INFO
-			"uwb switch emulation enabled\n");
+		pr_info("uwb switch emulation enabled\n");
 	} else
 #endif
 	if (tp_features.uwb &&
@@ -4444,6 +4379,15 @@ static int video_orig_autosw;
 static int video_autosw_get(void);
 static int video_autosw_set(int enable);
 
+TPACPI_HANDLE(vid, root,
+	      "\\_SB.PCI.AGP.VGA",	/* 570 */
+	      "\\_SB.PCI0.AGP0.VID0",	/* 600e/x, 770x */
+	      "\\_SB.PCI0.VID0",	/* 770e */
+	      "\\_SB.PCI0.VID",		/* A21e, G4x, R50e, X30, X40 */
+	      "\\_SB.PCI0.AGP.VGA",	/* X100e and a few others */
+	      "\\_SB.PCI0.AGP.VID",	/* all others */
+	);				/* R30, R31 */
+
 TPACPI_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID");	/* G41 */
 
 static int __init video_init(struct ibm_init_struct *iibm)
@@ -4487,7 +4431,7 @@ static void video_exit(void)
 	dbg_printk(TPACPI_DBG_EXIT,
 		   "restoring original video autoswitch mode\n");
 	if (video_autosw_set(video_orig_autosw))
-		printk(TPACPI_ERR "error while trying to restore original "
+		pr_err("error while trying to restore original "
 			"video autoswitch mode\n");
 }
 
@@ -4560,8 +4504,7 @@ static int video_outputsw_set(int status)
 		res = acpi_evalf(vid_handle, NULL,
 				 "ASWT", "vdd", status * 0x100, 0);
 		if (!autosw && video_autosw_set(autosw)) {
-			printk(TPACPI_ERR
-			       "video auto-switch left enabled due to error\n");
+			pr_err("video auto-switch left enabled due to error\n");
 			return -EIO;
 		}
 		break;
@@ -4630,8 +4573,7 @@ static int video_outputsw_cycle(void)
 		return -ENOSYS;
 	}
 	if (!autosw && video_autosw_set(autosw)) {
-		printk(TPACPI_ERR
-		       "video auto-switch left enabled due to error\n");
+		pr_err("video auto-switch left enabled due to error\n");
 		return -EIO;
 	}
 
@@ -5348,7 +5290,7 @@ static int __init led_init(struct ibm_init_struct *iibm)
 	tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
 			      GFP_KERNEL);
 	if (!tpacpi_leds) {
-		printk(TPACPI_ERR "Out of memory for LED data\n");
+		pr_err("Out of memory for LED data\n");
 		return -ENOMEM;
 	}
 
@@ -5367,9 +5309,8 @@ static int __init led_init(struct ibm_init_struct *iibm)
 	}
 
 #ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
-	printk(TPACPI_NOTICE
-		"warning: userspace override of important "
-		"firmware LEDs is enabled\n");
+	pr_notice("warning: userspace override of important "
+		  "firmware LEDs is enabled\n");
 #endif
 	return 0;
 }
@@ -5639,17 +5580,16 @@ static void thermal_dump_all_sensors(void)
 	if (n <= 0)
 		return;
 
-	printk(TPACPI_NOTICE
-		"temperatures (Celsius):");
+	pr_notice("temperatures (Celsius):");
 
 	for (i = 0; i < n; i++) {
 		if (t.temp[i] != TPACPI_THERMAL_SENSOR_NA)
-			printk(KERN_CONT " %d", (int)(t.temp[i] / 1000));
+			pr_cont(" %d", (int)(t.temp[i] / 1000));
 		else
-			printk(KERN_CONT " N/A");
+			pr_cont(" N/A");
 	}
 
-	printk(KERN_CONT "\n");
+	pr_cont("\n");
 }
 
 /* sysfs temp##_input -------------------------------------------------- */
@@ -5769,14 +5709,12 @@ static int __init thermal_init(struct ibm_init_struct *iibm)
 		if (ta1 == 0) {
 			/* This is sheer paranoia, but we handle it anyway */
 			if (acpi_tmp7) {
-				printk(TPACPI_ERR
-				       "ThinkPad ACPI EC access misbehaving, "
+				pr_err("ThinkPad ACPI EC access misbehaving, "
 				       "falling back to ACPI TMPx access "
 				       "mode\n");
 				thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07;
 			} else {
-				printk(TPACPI_ERR
-				       "ThinkPad ACPI EC access misbehaving, "
+				pr_err("ThinkPad ACPI EC access misbehaving, "
 				       "disabling thermal sensors access\n");
 				thermal_read_mode = TPACPI_THERMAL_NONE;
 			}
@@ -6129,8 +6067,8 @@ static int __init tpacpi_query_bcl_levels(acpi_handle handle)
 	if (ACPI_SUCCESS(acpi_evaluate_object(handle, "_BCL", NULL, &buffer))) {
 		obj = (union acpi_object *)buffer.pointer;
 		if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
-			printk(TPACPI_ERR "Unknown _BCL data, "
-			       "please report this to %s\n", TPACPI_MAIL);
+			pr_err("Unknown _BCL data, please report this to %s\n",
+			       TPACPI_MAIL);
 			rc = 0;
 		} else {
 			rc = obj->package.count;
@@ -6214,18 +6152,15 @@ static void __init tpacpi_detect_brightness_capabilities(void)
 	switch (b) {
 	case 16:
 		bright_maxlvl = 15;
-		printk(TPACPI_INFO
-		       "detected a 16-level brightness capable ThinkPad\n");
+		pr_info("detected a 16-level brightness capable ThinkPad\n");
 		break;
 	case 8:
 	case 0:
 		bright_maxlvl = 7;
-		printk(TPACPI_INFO
-		       "detected a 8-level brightness capable ThinkPad\n");
+		pr_info("detected a 8-level brightness capable ThinkPad\n");
 		break;
 	default:
-		printk(TPACPI_ERR
-		       "Unsupported brightness interface, "
+		pr_err("Unsupported brightness interface, "
 		       "please contact %s\n", TPACPI_MAIL);
 		tp_features.bright_unkfw = 1;
 		bright_maxlvl = b - 1;
@@ -6260,22 +6195,19 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 
 	if (acpi_video_backlight_support()) {
 		if (brightness_enable > 1) {
-			printk(TPACPI_INFO
-			       "Standard ACPI backlight interface "
-			       "available, not loading native one.\n");
+			pr_info("Standard ACPI backlight interface "
+				"available, not loading native one\n");
 			return 1;
 		} else if (brightness_enable == 1) {
-			printk(TPACPI_WARN
-				"Cannot enable backlight brightness support, "
+			pr_warn("Cannot enable backlight brightness support, "
 				"ACPI is already handling it.  Refer to the "
-				"acpi_backlight kernel parameter\n");
+				"acpi_backlight kernel parameter.\n");
 			return 1;
 		}
 	} else if (tp_features.bright_acpimode && brightness_enable > 1) {
-		printk(TPACPI_NOTICE
-			"Standard ACPI backlight interface not "
-			"available, thinkpad_acpi native "
-			"brightness control enabled\n");
+		pr_notice("Standard ACPI backlight interface not "
+			  "available, thinkpad_acpi native "
+			  "brightness control enabled\n");
 	}
 
 	/*
@@ -6319,19 +6251,17 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 	if (IS_ERR(ibm_backlight_device)) {
 		int rc = PTR_ERR(ibm_backlight_device);
 		ibm_backlight_device = NULL;
-		printk(TPACPI_ERR "Could not register backlight device\n");
+		pr_err("Could not register backlight device\n");
 		return rc;
 	}
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
 			"brightness is supported\n");
 
 	if (quirks & TPACPI_BRGHT_Q_ASK) {
-		printk(TPACPI_NOTICE
-			"brightness: will use unverified default: "
-			"brightness_mode=%d\n", brightness_mode);
-		printk(TPACPI_NOTICE
-			"brightness: please report to %s whether it works well "
-			"or not on your ThinkPad\n", TPACPI_MAIL);
+		pr_notice("brightness: will use unverified default: "
+			  "brightness_mode=%d\n", brightness_mode);
+		pr_notice("brightness: please report to %s whether it works well "
+			  "or not on your ThinkPad\n", TPACPI_MAIL);
 	}
 
 	/* Added by mistake in early 2007.  Probably useless, but it could
@@ -6804,8 +6734,7 @@ static int __init volume_create_alsa_mixer(void)
 	rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE,
 			    sizeof(struct tpacpi_alsa_data), &card);
 	if (rc < 0 || !card) {
-		printk(TPACPI_ERR
-			"Failed to create ALSA card structures: %d\n", rc);
+		pr_err("Failed to create ALSA card structures: %d\n", rc);
 		return 1;
 	}
 
@@ -6839,9 +6768,8 @@ static int __init volume_create_alsa_mixer(void)
 		ctl_vol = snd_ctl_new1(&volume_alsa_control_vol, NULL);
 		rc = snd_ctl_add(card, ctl_vol);
 		if (rc < 0) {
-			printk(TPACPI_ERR
-				"Failed to create ALSA volume control: %d\n",
-				rc);
+			pr_err("Failed to create ALSA volume control: %d\n",
+			       rc);
 			goto err_exit;
 		}
 		data->ctl_vol_id = &ctl_vol->id;
@@ -6850,8 +6778,7 @@ static int __init volume_create_alsa_mixer(void)
 	ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL);
 	rc = snd_ctl_add(card, ctl_mute);
 	if (rc < 0) {
-		printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n",
-			rc);
+		pr_err("Failed to create ALSA mute control: %d\n", rc);
 		goto err_exit;
 	}
 	data->ctl_mute_id = &ctl_mute->id;
@@ -6859,7 +6786,7 @@ static int __init volume_create_alsa_mixer(void)
 	snd_card_set_dev(card, &tpacpi_pdev->dev);
 	rc = snd_card_register(card);
 	if (rc < 0) {
-		printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc);
+		pr_err("Failed to register ALSA card: %d\n", rc);
 		goto err_exit;
 	}
 
@@ -6915,9 +6842,8 @@ static int __init volume_init(struct ibm_init_struct *iibm)
 		return -EINVAL;
 
 	if (volume_mode == TPACPI_VOL_MODE_UCMS_STEP) {
-		printk(TPACPI_ERR
-			"UCMS step volume mode not implemented, "
-			"please contact %s\n", TPACPI_MAIL);
+		pr_err("UCMS step volume mode not implemented, "
+		       "please contact %s\n", TPACPI_MAIL);
 		return 1;
 	}
 
@@ -6981,13 +6907,11 @@ static int __init volume_init(struct ibm_init_struct *iibm)
 
 	rc = volume_create_alsa_mixer();
 	if (rc) {
-		printk(TPACPI_ERR
-			"Could not create the ALSA mixer interface\n");
+		pr_err("Could not create the ALSA mixer interface\n");
 		return rc;
 	}
 
-	printk(TPACPI_INFO
-		"Console audio control enabled, mode: %s\n",
+	pr_info("Console audio control enabled, mode: %s\n",
 		(volume_control_allowed) ?
 			"override (read/write)" :
 			"monitor (read only)");
@@ -7049,12 +6973,10 @@ static int volume_write(char *buf)
 	if (!volume_control_allowed && tpacpi_lifecycle != TPACPI_LIFE_INIT) {
 		if (unlikely(!tp_warned.volume_ctrl_forbidden)) {
 			tp_warned.volume_ctrl_forbidden = 1;
-			printk(TPACPI_NOTICE
-				"Console audio control in monitor mode, "
-				"changes are not allowed.\n");
-			printk(TPACPI_NOTICE
-				"Use the volume_control=1 module parameter "
-				"to enable volume control\n");
+			pr_notice("Console audio control in monitor mode, "
+				  "changes are not allowed\n");
+			pr_notice("Use the volume_control=1 module parameter "
+				  "to enable volume control\n");
 		}
 		return -EPERM;
 	}
@@ -7129,8 +7051,7 @@ static void inline volume_alsa_notify_change(void)
 
 static int __init volume_init(struct ibm_init_struct *iibm)
 {
-	printk(TPACPI_INFO
-		"volume: disabled as there is no ALSA support in this kernel\n");
+	pr_info("volume: disabled as there is no ALSA support in this kernel\n");
 
 	return 1;
 }
@@ -7337,9 +7258,8 @@ TPACPI_HANDLE(sfan, ec, "SFAN",	/* 570 */
 static void fan_quirk1_setup(void)
 {
 	if (fan_control_initial_status == 0x07) {
-		printk(TPACPI_NOTICE
-		       "fan_init: initial fan status is unknown, "
-		       "assuming it is in auto mode\n");
+		pr_notice("fan_init: initial fan status is unknown, "
+			  "assuming it is in auto mode\n");
 		tp_features.fan_ctrl_status_undef = 1;
 	}
 }
@@ -7726,8 +7646,7 @@ static void fan_watchdog_reset(void)
 		if (!queue_delayed_work(tpacpi_wq, &fan_watchdog_task,
 				msecs_to_jiffies(fan_watchdog_maxinterval
 						 * 1000))) {
-			printk(TPACPI_ERR
-			       "failed to queue the fan watchdog, "
+			pr_err("failed to queue the fan watchdog, "
 			       "watchdog will not trigger\n");
 		}
 	} else
@@ -7741,11 +7660,11 @@ static void fan_watchdog_fire(struct work_struct *ignored)
 	if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING)
 		return;
 
-	printk(TPACPI_NOTICE "fan watchdog: enabling fan\n");
+	pr_notice("fan watchdog: enabling fan\n");
 	rc = fan_set_enable();
 	if (rc < 0) {
-		printk(TPACPI_ERR "fan watchdog: error %d while enabling fan, "
-			"will try again later...\n", -rc);
+		pr_err("fan watchdog: error %d while enabling fan, "
+		       "will try again later...\n", -rc);
 		/* reschedule for later */
 		fan_watchdog_reset();
 	}
@@ -8049,8 +7968,7 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 					"secondary fan support enabled\n");
 			}
 		} else {
-			printk(TPACPI_ERR
-			       "ThinkPad ACPI EC access misbehaving, "
+			pr_err("ThinkPad ACPI EC access misbehaving, "
 			       "fan status and control unavailable\n");
 			return 1;
 		}
@@ -8150,9 +8068,8 @@ static void fan_suspend(pm_message_t state)
 	fan_control_resume_level = 0;
 	rc = fan_get_status_safe(&fan_control_resume_level);
 	if (rc < 0)
-		printk(TPACPI_NOTICE
-			"failed to read fan level for later "
-			"restore during resume: %d\n", rc);
+		pr_notice("failed to read fan level for later "
+			  "restore during resume: %d\n", rc);
 
 	/* if it is undefined, don't attempt to restore it.
 	 * KEEP THIS LAST */
@@ -8207,13 +8124,11 @@ static void fan_resume(void)
 		return;
 	}
 	if (do_set) {
-		printk(TPACPI_NOTICE
-			"restoring fan level to 0x%02x\n",
-			fan_control_resume_level);
+		pr_notice("restoring fan level to 0x%02x\n",
+			  fan_control_resume_level);
 		rc = fan_set_level_safe(fan_control_resume_level);
 		if (rc < 0)
-			printk(TPACPI_NOTICE
-				"failed to restore fan level: %d\n", rc);
+			pr_notice("failed to restore fan level: %d\n", rc);
 	}
 }
 
@@ -8305,8 +8220,8 @@ static int fan_write_cmd_level(const char *cmd, int *rc)
 
 	*rc = fan_set_level_safe(level);
 	if (*rc == -ENXIO)
-		printk(TPACPI_ERR "level command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
+		pr_err("level command accepted for unsupported access mode %d\n",
+		       fan_control_access_mode);
 	else if (!*rc)
 		tpacpi_disclose_usertask("procfs fan",
 			"set level to %d\n", level);
@@ -8321,8 +8236,8 @@ static int fan_write_cmd_enable(const char *cmd, int *rc)
 
 	*rc = fan_set_enable();
 	if (*rc == -ENXIO)
-		printk(TPACPI_ERR "enable command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
+		pr_err("enable command accepted for unsupported access mode %d\n",
+		       fan_control_access_mode);
 	else if (!*rc)
 		tpacpi_disclose_usertask("procfs fan", "enable\n");
 
@@ -8336,8 +8251,8 @@ static int fan_write_cmd_disable(const char *cmd, int *rc)
 
 	*rc = fan_set_disable();
 	if (*rc == -ENXIO)
-		printk(TPACPI_ERR "disable command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
+		pr_err("disable command accepted for unsupported access mode %d\n",
+		       fan_control_access_mode);
 	else if (!*rc)
 		tpacpi_disclose_usertask("procfs fan", "disable\n");
 
@@ -8356,8 +8271,8 @@ static int fan_write_cmd_speed(const char *cmd, int *rc)
 
 	*rc = fan_set_speed(speed);
 	if (*rc == -ENXIO)
-		printk(TPACPI_ERR "speed command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
+		pr_err("speed command accepted for unsupported access mode %d\n",
+		       fan_control_access_mode);
 	else if (!*rc)
 		tpacpi_disclose_usertask("procfs fan",
 			"set speed to %d\n", speed);
@@ -8560,8 +8475,8 @@ static int __init ibm_init(struct ibm_init_struct *iibm)
 		if (ibm->acpi->notify) {
 			ret = setup_acpi_notify(ibm);
 			if (ret == -ENODEV) {
-				printk(TPACPI_NOTICE "disabling subdriver %s\n",
-					ibm->name);
+				pr_notice("disabling subdriver %s\n",
+					  ibm->name);
 				ret = 0;
 				goto err_out;
 			}
@@ -8583,8 +8498,7 @@ static int __init ibm_init(struct ibm_init_struct *iibm)
 		entry = proc_create_data(ibm->name, mode, proc_dir,
 					 &dispatch_proc_fops, ibm);
 		if (!entry) {
-			printk(TPACPI_ERR "unable to create proc entry %s\n",
-			       ibm->name);
+			pr_err("unable to create proc entry %s\n", ibm->name);
 			ret = -ENODEV;
 			goto err_out;
 		}
@@ -8683,13 +8597,11 @@ static int __must_check __init get_thinkpad_model_data(
 				tp->ec_release = (ec_fw_string[4] << 8)
 						| ec_fw_string[5];
 			} else {
-				printk(TPACPI_NOTICE
-					"ThinkPad firmware release %s "
-					"doesn't match the known patterns\n",
-					ec_fw_string);
-				printk(TPACPI_NOTICE
-					"please report this to %s\n",
-					TPACPI_MAIL);
+				pr_notice("ThinkPad firmware release %s "
+					  "doesn't match the known patterns\n",
+					  ec_fw_string);
+				pr_notice("please report this to %s\n",
+					  TPACPI_MAIL);
 			}
 			break;
 		}
@@ -8733,8 +8645,7 @@ static int __init probe_for_thinkpad(void)
 	tpacpi_acpi_handle_locate("ec", TPACPI_ACPI_EC_HID, &ec_handle);
 	if (!ec_handle) {
 		if (is_thinkpad)
-			printk(TPACPI_ERR
-				"Not yet supported ThinkPad detected!\n");
+			pr_err("Not yet supported ThinkPad detected!\n");
 		return -ENODEV;
 	}
 
@@ -8746,10 +8657,10 @@ static int __init probe_for_thinkpad(void)
 
 static void __init thinkpad_acpi_init_banner(void)
 {
-	printk(TPACPI_INFO "%s v%s\n", TPACPI_DESC, TPACPI_VERSION);
-	printk(TPACPI_INFO "%s\n", TPACPI_URL);
+	pr_info("%s v%s\n", TPACPI_DESC, TPACPI_VERSION);
+	pr_info("%s\n", TPACPI_URL);
 
-	printk(TPACPI_INFO "ThinkPad BIOS %s, EC %s\n",
+	pr_info("ThinkPad BIOS %s, EC %s\n",
 		(thinkpad_id.bios_version_str) ?
 			thinkpad_id.bios_version_str : "unknown",
 		(thinkpad_id.ec_version_str) ?
@@ -8758,7 +8669,7 @@ static void __init thinkpad_acpi_init_banner(void)
 	BUG_ON(!thinkpad_id.vendor);
 
 	if (thinkpad_id.model_str)
-		printk(TPACPI_INFO "%s %s, model %s\n",
+		pr_info("%s %s, model %s\n",
 			(thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ?
 				"IBM" : ((thinkpad_id.vendor ==
 						PCI_VENDOR_ID_LENOVO) ?
@@ -9024,8 +8935,7 @@ static int __init thinkpad_acpi_module_init(void)
 
 	ret = get_thinkpad_model_data(&thinkpad_id);
 	if (ret) {
-		printk(TPACPI_ERR
-			"unable to get DMI data: %d\n", ret);
+		pr_err("unable to get DMI data: %d\n", ret);
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
@@ -9051,16 +8961,14 @@ static int __init thinkpad_acpi_module_init(void)
 
 	proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir);
 	if (!proc_dir) {
-		printk(TPACPI_ERR
-		       "unable to create proc dir " TPACPI_PROC_DIR);
+		pr_err("unable to create proc dir " TPACPI_PROC_DIR "\n");
 		thinkpad_acpi_module_exit();
 		return -ENODEV;
 	}
 
 	ret = platform_driver_register(&tpacpi_pdriver);
 	if (ret) {
-		printk(TPACPI_ERR
-		       "unable to register main platform driver\n");
+		pr_err("unable to register main platform driver\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
@@ -9068,8 +8976,7 @@ static int __init thinkpad_acpi_module_init(void)
 
 	ret = platform_driver_register(&tpacpi_hwmon_pdriver);
 	if (ret) {
-		printk(TPACPI_ERR
-		       "unable to register hwmon platform driver\n");
+		pr_err("unable to register hwmon platform driver\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
@@ -9082,8 +8989,7 @@ static int __init thinkpad_acpi_module_init(void)
 					&tpacpi_hwmon_pdriver.driver);
 	}
 	if (ret) {
-		printk(TPACPI_ERR
-		       "unable to create sysfs driver attributes\n");
+		pr_err("unable to create sysfs driver attributes\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
@@ -9096,7 +9002,7 @@ static int __init thinkpad_acpi_module_init(void)
 	if (IS_ERR(tpacpi_pdev)) {
 		ret = PTR_ERR(tpacpi_pdev);
 		tpacpi_pdev = NULL;
-		printk(TPACPI_ERR "unable to register platform device\n");
+		pr_err("unable to register platform device\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
@@ -9106,16 +9012,14 @@ static int __init thinkpad_acpi_module_init(void)
 	if (IS_ERR(tpacpi_sensors_pdev)) {
 		ret = PTR_ERR(tpacpi_sensors_pdev);
 		tpacpi_sensors_pdev = NULL;
-		printk(TPACPI_ERR
-		       "unable to register hwmon platform device\n");
+		pr_err("unable to register hwmon platform device\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
 	ret = device_create_file(&tpacpi_sensors_pdev->dev,
 				 &dev_attr_thinkpad_acpi_pdev_name);
 	if (ret) {
-		printk(TPACPI_ERR
-		       "unable to create sysfs hwmon device attributes\n");
+		pr_err("unable to create sysfs hwmon device attributes\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
@@ -9124,14 +9028,14 @@ static int __init thinkpad_acpi_module_init(void)
 	if (IS_ERR(tpacpi_hwmon)) {
 		ret = PTR_ERR(tpacpi_hwmon);
 		tpacpi_hwmon = NULL;
-		printk(TPACPI_ERR "unable to register hwmon device\n");
+		pr_err("unable to register hwmon device\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
 	mutex_init(&tpacpi_inputdev_send_mutex);
 	tpacpi_inputdev = input_allocate_device();
 	if (!tpacpi_inputdev) {
-		printk(TPACPI_ERR "unable to allocate input device\n");
+		pr_err("unable to allocate input device\n");
 		thinkpad_acpi_module_exit();
 		return -ENOMEM;
 	} else {
@@ -9163,7 +9067,7 @@ static int __init thinkpad_acpi_module_init(void)
 
 	ret = input_register_device(tpacpi_inputdev);
 	if (ret < 0) {
-		printk(TPACPI_ERR "unable to register input device\n");
+		pr_err("unable to register input device\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	} else {
diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c
index 1d07d6d09f27..4c20447ddbb7 100644
--- a/drivers/platform/x86/topstar-laptop.c
+++ b/drivers/platform/x86/topstar-laptop.c
@@ -194,7 +194,7 @@ static int __init topstar_laptop_init(void)
 	if (ret < 0)
 		return ret;
 
-	printk(KERN_INFO "Topstar Laptop ACPI extras driver loaded\n");
+	pr_info("ACPI extras driver loaded\n");
 
 	return 0;
 }
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 63f42a22e102..cb009b2629ee 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -35,6 +35,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define TOSHIBA_ACPI_VERSION	"0.19"
 #define PROC_INTERFACE_VERSION	1
 
@@ -60,11 +62,6 @@ MODULE_AUTHOR("John Belmonte");
 MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver");
 MODULE_LICENSE("GPL");
 
-#define MY_LOGPREFIX "toshiba_acpi: "
-#define MY_ERR KERN_ERR MY_LOGPREFIX
-#define MY_NOTICE KERN_NOTICE MY_LOGPREFIX
-#define MY_INFO KERN_INFO MY_LOGPREFIX
-
 /* Toshiba ACPI method paths */
 #define METHOD_LCD_BRIGHTNESS	"\\_SB_.PCI0.VGA_.LCD_._BCM"
 #define TOSH_INTERFACE_1	"\\_SB_.VALD"
@@ -301,7 +298,7 @@ static int toshiba_illumination_available(void)
 	in[0] = 0xf100;
 	status = hci_raw(in, out);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "Illumination device not available\n");
+		pr_info("Illumination device not available\n");
 		return 0;
 	}
 	in[0] = 0xf400;
@@ -320,7 +317,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev,
 	in[0] = 0xf100;
 	status = hci_raw(in, out);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "Illumination device not available\n");
+		pr_info("Illumination device not available\n");
 		return;
 	}
 
@@ -331,7 +328,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev,
 		in[2] = 1;
 		status = hci_raw(in, out);
 		if (ACPI_FAILURE(status)) {
-			printk(MY_INFO "ACPI call for illumination failed.\n");
+			pr_info("ACPI call for illumination failed\n");
 			return;
 		}
 	} else {
@@ -341,7 +338,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev,
 		in[2] = 0;
 		status = hci_raw(in, out);
 		if (ACPI_FAILURE(status)) {
-			printk(MY_INFO "ACPI call for illumination failed.\n");
+			pr_info("ACPI call for illumination failed.\n");
 			return;
 		}
 	}
@@ -364,7 +361,7 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
 	in[0] = 0xf100;
 	status = hci_raw(in, out);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "Illumination device not available\n");
+		pr_info("Illumination device not available\n");
 		return LED_OFF;
 	}
 
@@ -373,7 +370,7 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
 	in[1] = 0x14e;
 	status = hci_raw(in, out);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "ACPI call for illumination failed.\n");
+		pr_info("ACPI call for illumination failed.\n");
 		return LED_OFF;
 	}
 
@@ -517,7 +514,7 @@ static int lcd_proc_show(struct seq_file *m, void *v)
 		seq_printf(m, "brightness_levels:       %d\n",
 			     HCI_LCD_BRIGHTNESS_LEVELS);
 	} else {
-		printk(MY_ERR "Error reading LCD brightness\n");
+		pr_err("Error reading LCD brightness\n");
 	}
 
 	return 0;
@@ -592,7 +589,7 @@ static int video_proc_show(struct seq_file *m, void *v)
 		seq_printf(m, "crt_out:                 %d\n", is_crt);
 		seq_printf(m, "tv_out:                  %d\n", is_tv);
 	} else {
-		printk(MY_ERR "Error reading video out status\n");
+		pr_err("Error reading video out status\n");
 	}
 
 	return 0;
@@ -686,7 +683,7 @@ static int fan_proc_show(struct seq_file *m, void *v)
 		seq_printf(m, "running:                 %d\n", (value > 0));
 		seq_printf(m, "force_on:                %d\n", force_fan);
 	} else {
-		printk(MY_ERR "Error reading fan status\n");
+		pr_err("Error reading fan status\n");
 	}
 
 	return 0;
@@ -750,9 +747,9 @@ static int keys_proc_show(struct seq_file *m, void *v)
 			 * some machines where system events sporadically
 			 * become disabled. */
 			hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
-			printk(MY_NOTICE "Re-enabled hotkeys\n");
+			pr_notice("Re-enabled hotkeys\n");
 		} else {
-			printk(MY_ERR "Error reading hotkey status\n");
+			pr_err("Error reading hotkey status\n");
 			goto end;
 		}
 	}
@@ -863,7 +860,7 @@ static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context)
 
 			if (!sparse_keymap_report_event(toshiba_acpi.hotkey_dev,
 							value, 1, true)) {
-				printk(MY_INFO "Unknown key %x\n",
+				pr_info("Unknown key %x\n",
 				       value);
 			}
 		} else if (hci_result == HCI_NOT_SUPPORTED) {
@@ -871,7 +868,7 @@ static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context)
 			 * some machines where system events sporadically
 			 * become disabled. */
 			hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
-			printk(MY_NOTICE "Re-enabled hotkeys\n");
+			pr_notice("Re-enabled hotkeys\n");
 		}
 	} while (hci_result != HCI_EMPTY);
 }
@@ -883,13 +880,13 @@ static int __init toshiba_acpi_setup_keyboard(char *device)
 
 	status = acpi_get_handle(NULL, device, &toshiba_acpi.handle);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "Unable to get notification device\n");
+		pr_info("Unable to get notification device\n");
 		return -ENODEV;
 	}
 
 	toshiba_acpi.hotkey_dev = input_allocate_device();
 	if (!toshiba_acpi.hotkey_dev) {
-		printk(MY_INFO "Unable to register input device\n");
+		pr_info("Unable to register input device\n");
 		return -ENOMEM;
 	}
 
@@ -905,21 +902,21 @@ static int __init toshiba_acpi_setup_keyboard(char *device)
 	status = acpi_install_notify_handler(toshiba_acpi.handle,
 				ACPI_DEVICE_NOTIFY, toshiba_acpi_notify, NULL);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "Unable to install hotkey notification\n");
+		pr_info("Unable to install hotkey notification\n");
 		error = -ENODEV;
 		goto err_free_keymap;
 	}
 
 	status = acpi_evaluate_object(toshiba_acpi.handle, "ENAB", NULL, NULL);
 	if (ACPI_FAILURE(status)) {
-		printk(MY_INFO "Unable to enable hotkeys\n");
+		pr_info("Unable to enable hotkeys\n");
 		error = -ENODEV;
 		goto err_remove_notify;
 	}
 
 	error = input_register_device(toshiba_acpi.hotkey_dev);
 	if (error) {
-		printk(MY_INFO "Unable to register input device\n");
+		pr_info("Unable to register input device\n");
 		goto err_remove_notify;
 	}
 
@@ -980,17 +977,17 @@ static int __init toshiba_acpi_init(void)
 	if (is_valid_acpi_path(TOSH_INTERFACE_1 GHCI_METHOD)) {
 		method_hci = TOSH_INTERFACE_1 GHCI_METHOD;
 		if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_1))
-			printk(MY_INFO "Unable to activate hotkeys\n");
+			pr_info("Unable to activate hotkeys\n");
 	} else if (is_valid_acpi_path(TOSH_INTERFACE_2 GHCI_METHOD)) {
 		method_hci = TOSH_INTERFACE_2 GHCI_METHOD;
 		if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_2))
-			printk(MY_INFO "Unable to activate hotkeys\n");
+			pr_info("Unable to activate hotkeys\n");
 	} else
 		return -ENODEV;
 
-	printk(MY_INFO "Toshiba Laptop ACPI Extras version %s\n",
+	pr_info("Toshiba Laptop ACPI Extras version %s\n",
 	       TOSHIBA_ACPI_VERSION);
-	printk(MY_INFO "    HCI method: %s\n", method_hci);
+	pr_info("    HCI method: %s\n", method_hci);
 
 	mutex_init(&toshiba_acpi.mutex);
 
@@ -998,7 +995,7 @@ static int __init toshiba_acpi_init(void)
 							      -1, NULL, 0);
 	if (IS_ERR(toshiba_acpi.p_dev)) {
 		ret = PTR_ERR(toshiba_acpi.p_dev);
-		printk(MY_ERR "unable to register platform device\n");
+		pr_err("unable to register platform device\n");
 		toshiba_acpi.p_dev = NULL;
 		toshiba_acpi_exit();
 		return ret;
@@ -1028,7 +1025,7 @@ static int __init toshiba_acpi_init(void)
         if (IS_ERR(toshiba_backlight_device)) {
 		ret = PTR_ERR(toshiba_backlight_device);
 
-		printk(KERN_ERR "Could not register toshiba backlight device\n");
+		pr_err("Could not register toshiba backlight device\n");
 		toshiba_backlight_device = NULL;
 		toshiba_acpi_exit();
 		return ret;
@@ -1042,14 +1039,14 @@ static int __init toshiba_acpi_init(void)
 						   &toshiba_rfk_ops,
 						   &toshiba_acpi);
 		if (!toshiba_acpi.bt_rfk) {
-			printk(MY_ERR "unable to allocate rfkill device\n");
+			pr_err("unable to allocate rfkill device\n");
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
 
 		ret = rfkill_register(toshiba_acpi.bt_rfk);
 		if (ret) {
-			printk(MY_ERR "unable to register rfkill device\n");
+			pr_err("unable to register rfkill device\n");
 			rfkill_destroy(toshiba_acpi.bt_rfk);
 			toshiba_acpi_exit();
 			return ret;
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index 944068611919..5fb7186694df 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -17,6 +17,8 @@
  * delivered.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -70,14 +72,13 @@ static int toshiba_bluetooth_enable(acpi_handle handle)
 	if (!(result & 0x01))
 		return 0;
 
-	printk(KERN_INFO "toshiba_bluetooth: Re-enabling Toshiba Bluetooth\n");
+	pr_info("Re-enabling Toshiba Bluetooth\n");
 	res1 = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
 	res2 = acpi_evaluate_object(handle, "BTPO", NULL, NULL);
 	if (!ACPI_FAILURE(res1) || !ACPI_FAILURE(res2))
 		return 0;
 
-	printk(KERN_WARNING "toshiba_bluetooth: Failed to re-enable "
-	       "Toshiba Bluetooth\n");
+	pr_warn("Failed to re-enable Toshiba Bluetooth\n");
 
 	return -ENODEV;
 }
@@ -107,8 +108,8 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device)
 				       &bt_present);
 
 	if (!ACPI_FAILURE(status) && bt_present) {
-		printk(KERN_INFO "Detected Toshiba ACPI Bluetooth device - "
-		      "installing RFKill handler\n");
+		pr_info("Detected Toshiba ACPI Bluetooth device - "
+			"installing RFKill handler\n");
 		result = toshiba_bluetooth_enable(device->handle);
 	}
 
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 05cc79672a8b..f23d5a84e7b1 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -486,16 +486,16 @@ static void wmi_dump_wdg(const struct guid_block *g)
 	pr_info("\tnotify_id: %02X\n", g->notify_id);
 	pr_info("\treserved: %02X\n", g->reserved);
 	pr_info("\tinstance_count: %d\n", g->instance_count);
-	pr_info("\tflags: %#x ", g->flags);
+	pr_info("\tflags: %#x", g->flags);
 	if (g->flags) {
 		if (g->flags & ACPI_WMI_EXPENSIVE)
-			pr_cont("ACPI_WMI_EXPENSIVE ");
+			pr_cont(" ACPI_WMI_EXPENSIVE");
 		if (g->flags & ACPI_WMI_METHOD)
-			pr_cont("ACPI_WMI_METHOD ");
+			pr_cont(" ACPI_WMI_METHOD");
 		if (g->flags & ACPI_WMI_STRING)
-			pr_cont("ACPI_WMI_STRING ");
+			pr_cont(" ACPI_WMI_STRING");
 		if (g->flags & ACPI_WMI_EVENT)
-			pr_cont("ACPI_WMI_EVENT ");
+			pr_cont(" ACPI_WMI_EVENT");
 	}
 	pr_cont("\n");
 
diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c
index c1372ed9d2e9..fad153dc0355 100644
--- a/drivers/platform/x86/xo15-ebook.c
+++ b/drivers/platform/x86/xo15-ebook.c
@@ -11,6 +11,8 @@
  *  your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,7 +22,6 @@
 #include <acpi/acpi_drivers.h>
 
 #define MODULE_NAME "xo15-ebook"
-#define PREFIX MODULE_NAME ": "
 
 #define XO15_EBOOK_CLASS		MODULE_NAME
 #define XO15_EBOOK_TYPE_UNKNOWN	0x00
@@ -105,7 +106,7 @@ static int ebook_switch_add(struct acpi_device *device)
 	class = acpi_device_class(device);
 
 	if (strcmp(hid, XO15_EBOOK_HID)) {
-		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
+		pr_err("Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
 		goto err_free_input;
 	}
author	Linus Torvalds	2011-05-29 11:44:33 -0700
committer	Linus Torvalds	2011-05-29 11:44:33 -0700
commit	2ba781ced93922e249dee2ac0751faccb4fb0656 (patch)
tree	8b62346278b60d1bc9765dc6691f07219a27d894 /drivers/platform
parent	6345d24daf0c1fffe6642081d783cdf653ebaa5c (diff)
parent	437cb0dbd104a1564e0e78f0d486b97677f80909 (diff)