diff options
| author | Hans de Goede | 2022-11-28 10:28:48 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2022-12-31 13:32:45 +0100 |
| commit | 64245114c072ed3f5c2f6ff11a862e3b1b6df7fe (patch) | |
| tree | 40a9ca6be9f73c8b00987733a2daec7f5a416351 /drivers/power | |
| parent | 81b0e5d5aa0c4cb08bdffec4bdb97785b5459d11 (diff) | |
power: supply: bq25890: Ensure pump_express_work is cancelled on remove
[ Upstream commit a7aaa80098d5b7608b2dc1e883e3c3f929415243 ]
The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).
Add a devm action cancelling the work, to ensure that it is cancelled.
Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).
Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/supply/bq25890_charger.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index f212fc7cbb6d..0e15302b8df2 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -1219,6 +1219,13 @@ static int bq25890_fw_probe(struct bq25890_device *bq) return 0; } +static void bq25890_non_devm_cleanup(void *data) +{ + struct bq25890_device *bq = data; + + cancel_delayed_work_sync(&bq->pump_express_work); +} + static int bq25890_probe(struct i2c_client *client) { struct device *dev = &client->dev; @@ -1274,6 +1281,14 @@ static int bq25890_probe(struct i2c_client *client) /* OTG reporting */ bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + /* + * This must be before bq25890_power_supply_init(), so that it runs + * after devm unregisters the power_supply. + */ + ret = devm_add_action_or_reset(dev, bq25890_non_devm_cleanup, bq); + if (ret) + return ret; + ret = bq25890_register_regulator(bq); if (ret) return ret; |