diff options
| author | MyungJoo Ham | 2010-08-20 14:43:56 +0900 |
|---|---|---|
| committer | Liam Girdwood | 2010-10-28 22:40:31 +0100 |
| commit | 202f4f53e503ae09b431459131b5b3a99fa6d839 (patch) | |
| tree | 71f4597427f8bc9011aca93f873bd01154f2d25d /drivers/regulator/Kconfig | |
| parent | 2d3b07c07b39c4b7d9b6641052a02d996cd5d87c (diff) | |
MAX8952 PMIC Driver Initial Release
MAX8952 PMIC is used to provide voltage output between 770mV - 1400mV
with DVS support. In this initial release, users can set voltages for
four DVS modes, RAMP delay values, and SYNC frequency.
Controlling FPWM/SYNC_MODE/Pull-Down/Ramp Modes and reading CHIP_ID
is not supported in this release.
If GPIO of EN is not valid in platform data, the driver assumes that it
is always-on. If GPIO of VID0 or VID1 is invalid, the driver pulls down
VID0 and VID1 to fix DVS mode as 0 and disables DVS support.
We assume that V_OUT is capable to provide every voltage from 770mV to
1.40V in 10mV steps although the data sheet has some ambiguity on it.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
--
v2:
- Style correction
- Can accept platform_data with invalid GPIOs
- Removed unnecessary features
- Improved error handling
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 172951bf23a4..4889caabc632 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -100,6 +100,14 @@ config REGULATOR_MAX8925 help Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. +config REGULATOR_MAX8952 + tristate "Maxim MAX8952 Power Management IC" + depends on I2C + help + This driver controls a Maxim 8952 voltage output regulator + via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS + modes ranging from 0.77V to 1.40V by 0.01V steps. + config REGULATOR_MAX8998 tristate "Maxim 8998 voltage regulator" depends on MFD_MAX8998 |