diff options
| author | Finn Thain | 2016-03-23 21:10:10 +1100 |
|---|---|---|
| committer | Martin K. Petersen | 2016-04-11 16:57:09 -0400 |
| commit | 9d376402c80cfe2356d84577d366ca790e576bd9 (patch) | |
| tree | 83b3b800e6866c22c161df43e188a6e4be73ae74 /drivers/scsi/Kconfig | |
| parent | e1f0bce3a0db95007fec756225801e50477f32fd (diff) | |
g_ncr5380: Remove CONFIG_SCSI_GENERIC_NCR53C400
This change brings a number of improvements: fewer macros, better test
coverage, simpler code and sane Kconfig options. The downside is a small
chance of incompatibility (which seems unavoidable).
CONFIG_SCSI_GENERIC_NCR53C400 exists to enable or inhibit pseudo DMA
transfers when the driver is used with 53C400-compatible cards. Thanks to
Ondrej Zary's patches, PDMA now works which means it can be enabled
unconditionally.
Due to bad design, CONFIG_SCSI_GENERIC_NCR53C400 ties together unrelated
functionality as it sets both PSEUDO_DMA and BIOSPARAM macros. This patch
effectively enables PSEUDO_DMA and disables BIOSPARAM.
The defconfigs and the Kconfig default leave CONFIG_SCSI_GENERIC_NCR53C400
undefined. Red Hat 9 and CentOS 2.1 were the same. This leaves both
PSEUDO_DMA and BIOSPARAM disabled. The effect of this patch should be
better performance from enabling PSEUDO_DMA.
On the other hand, Debian 4 and SLES 10 had CONFIG_SCSI_GENERIC_NCR53C400
enabled, so both PSEUDO_DMA and BIOSPARAM were enabled. This patch might
affect configurations like this by disabling BIOSPARAM. My best guess is
that this could be a problem only in the vanishingly rare case that
1) the CHS values stored in the boot device partition table are wrong and
2) a 5380 card is in use (because PDMA on 53C400 used to be broken).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 11 |
1 files changed, 0 insertions, 11 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 47611bda633f..0950567e6269 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -813,17 +813,6 @@ config SCSI_GENERIC_NCR5380_MMIO To compile this driver as a module, choose M here: the module will be called g_NCR5380_mmio. -config SCSI_GENERIC_NCR53C400 - bool "Enable NCR53c400 extensions" - depends on SCSI_GENERIC_NCR5380 - help - This enables certain optimizations for the NCR53c400 SCSI cards. - You might as well try it out. Note that this driver will only probe - for the Trantor T130B in its default configuration; you might have - to pass a command line option to the kernel at boot time if it does - not detect your card. See the file - <file:Documentation/scsi/g_NCR5380.txt> for details. - config SCSI_IPS tristate "IBM ServeRAID support" depends on PCI && SCSI |