diff options
author | Sreekanth Reddy | 2019-12-26 06:13:25 -0500 |
---|---|---|
committer | Martin K. Petersen | 2020-01-02 22:23:16 -0500 |
commit | d3f623ae8e0323ca434ee9029100312a8be37773 (patch) | |
tree | b94c0e72bf5010e7a1dd66f9e0440b7201a836f1 /drivers/scsi/mpt3sas/mpt3sas_base.h | |
parent | 1ade26b616cc2da0b7277a97e3799c99bae0655b (diff) |
scsi: mpt3sas: Add support for NVMe shutdown
Introduce function _scsih_nvme_shutdown() to issue IO Unit Control message
to IOC firmware with operation code 'shutdown'. This causes IOC firmware to
issue NVMe shutdown commands to all NVMe drives attached to it.
NVMe Shutdown:
NVMe devices need to have a specific shutdown sequence performed before
power is removed. For this, the IOC firmware needs to be notified when the
system is being shutdown. So during the system shutdown time, driver issues
an IO Unit Control request with operation code MPI26_CTRL_OP_SHUTDOWN to
inform firmware that a shutdown is initiated.
This shutdown command is issued only if NVMe devices are attached to the
controller.
During each NVMe device addition, driver reads pcie device page2 to get
shutdown latency (e.g. drive's RTD3 Entry Latency) and updates the max
latency value among the added NVMe drives in ioc->max_shutdown_latency.
This is used as the timeout value for IO Unit Control command at the time
of shutdown.
When a NVMe drive is removed and its shutdown latency matches which
ioc->max_shutdown_latency then ioc->max_shutdown_latency is updated to next
max value (by iterating over the list of available devices). If the
shutdown latency is 0, then default timeout is set to six seconds.
Link: https://lore.kernel.org/r/20191226111333.26131-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_base.h')
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 4ebf81ea4d2f..00c1247a0a70 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -140,6 +140,7 @@ #define MAX_CHAIN_ELEMT_SZ 16 #define DEFAULT_NUM_FWCHAIN_ELEMTS 8 +#define IO_UNIT_CONTROL_SHUTDOWN_TIMEOUT 6 #define FW_IMG_HDR_READ_TIMEOUT 15 #define IOC_OPERATIONAL_WAIT_COUNT 10 @@ -589,6 +590,7 @@ static inline void sas_device_put(struct _sas_device *s) * @connector_name: ASCII value of the Connector's name * @serial_number: pointer of serial number string allocated runtime * @access_status: Device's Access Status + * @shutdown_latency: NVMe device's RTD3 Entry Latency * @refcount: reference count for deletion */ struct _pcie_device { @@ -611,6 +613,7 @@ struct _pcie_device { u8 *serial_number; u8 reset_timeout; u8 access_status; + u16 shutdown_latency; struct kref refcount; }; /** @@ -1073,6 +1076,10 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @event_context: unique id for each logged event * @event_log: event log pointer * @event_masks: events that are masked + * @max_shutdown_latency: timeout value for NVMe shutdown operation, + * which is equal that NVMe drive's RTD3 Entry Latency + * which has reported maximum RTD3 Entry Latency value + * among attached NVMe drives. * @facts: static facts data * @prev_fw_facts: previous fw facts data * @pfacts: static port facts data @@ -1283,7 +1290,7 @@ struct MPT3SAS_ADAPTER { u8 tm_custom_handling; u8 nvme_abort_timeout; - + u16 max_shutdown_latency; /* static config pages */ struct mpt3sas_facts facts; |