aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001
diff options
context:
space:
mode:
authorGreg Kroah-Hartman2012-12-21 13:08:55 -0800
committerGreg Kroah-Hartman2013-01-03 15:57:01 -0800
commit6f039790510fd630ff348efe8c4802dbaa041fba (patch)
treebf99ab35c78f689a40f3057537209be5f7ca88d6 /drivers/scsi/pm8001
parent48c68c4f1b542444f175a9e136febcecf3e704d8 (diff)
Drivers: scsi: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/scsi/pm8001')
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c36
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c28
2 files changed, 29 insertions, 35 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index bf54aafc2d71..b8dd05074abb 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -47,7 +47,7 @@
* read_main_config_table - read the configure table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
pm8001_ha->main_cfg_tbl.signature = pm8001_mr32(address, 0x00);
@@ -83,8 +83,7 @@ static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
* read_general_status_table - read the general status table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->general_stat_tbl_addr;
pm8001_ha->gs_tbl.gst_len_mpistate = pm8001_mr32(address, 0x00);
@@ -118,8 +117,7 @@ read_general_status_table(struct pm8001_hba_info *pm8001_ha)
* read_inbnd_queue_table - read the inbound queue table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
int inbQ_num = 1;
int i;
@@ -137,8 +135,7 @@ read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
* read_outbnd_queue_table - read the outbound queue table and save it.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
{
int outbQ_num = 1;
int i;
@@ -156,8 +153,7 @@ read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
* init_default_table_values - init the default table.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
{
int qn = 1;
int i;
@@ -250,8 +246,7 @@ init_default_table_values(struct pm8001_hba_info *pm8001_ha)
* update_main_config_table - update the main default table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
{
void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
pm8001_mw32(address, 0x24,
@@ -297,8 +292,8 @@ update_main_config_table(struct pm8001_hba_info *pm8001_ha)
* update_inbnd_queue_table - update the inbound queue table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
{
void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
u16 offset = number * 0x20;
@@ -318,8 +313,8 @@ update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
* update_outbnd_queue_table - update the outbound queue table to the HBA.
* @pm8001_ha: our hba card information
*/
-static void __devinit
-update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
{
void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
u16 offset = number * 0x24;
@@ -370,8 +365,8 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
* @pm8001_ha: our hba card information
* @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
*/
-static void __devinit
-mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
+static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
+ u32 SSCbit)
{
u32 value, offset, i;
unsigned long flags;
@@ -438,9 +433,8 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
* @pm8001_ha: our hba card information
* @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
*/
-static void __devinit
-mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
- u32 interval)
+static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+ u32 interval)
{
u32 offset;
u32 value;
@@ -601,7 +595,7 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
* pm8001_chip_init - the main init function that initialize whole PM8001 chip.
* @pm8001_ha: our hba card information
*/
-static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
{
/* check the firmware status */
if (-1 == check_fw_ready(pm8001_ha)) {
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 0267c22f8741..4c9fe733fe88 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -104,8 +104,7 @@ static struct sas_domain_function_template pm8001_transport_ops = {
*@pm8001_ha: our hba structure.
*@phy_id: phy id.
*/
-static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
- int phy_id)
+static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
{
struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
@@ -195,7 +194,7 @@ static irqreturn_t pm8001_interrupt(int irq, void *opaque)
* @pm8001_ha:our hba structure.
*
*/
-static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
{
int i;
spin_lock_init(&pm8001_ha->lock);
@@ -360,8 +359,9 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
* @ent: ent
* @shost: scsi host struct which has been initialized before.
*/
-static struct pm8001_hba_info *__devinit
-pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
+static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
+ u32 chip_id,
+ struct Scsi_Host *shost)
{
struct pm8001_hba_info *pm8001_ha;
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
@@ -433,8 +433,8 @@ static int pci_go_44(struct pci_dev *pdev)
* @shost: scsi host which has been allocated outside.
* @chip_info: our ha struct.
*/
-static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
- const struct pm8001_chip_info *chip_info)
+static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
{
int phy_nr, port_nr;
struct asd_sas_phy **arr_phy;
@@ -479,8 +479,8 @@ exit:
* @shost: scsi host which has been allocated outside
* @chip_info: our ha struct.
*/
-static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
- const struct pm8001_chip_info *chip_info)
+static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
{
int i = 0;
struct pm8001_hba_info *pm8001_ha;
@@ -615,8 +615,8 @@ intx:
* pci driver it is invoked, all struct an hardware initilization should be done
* here, also, register interrupt
*/
-static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int pm8001_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
unsigned int rc;
u32 pci_reg;
@@ -707,7 +707,7 @@ err_out_enable:
return rc;
}
-static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
+static void pm8001_pci_remove(struct pci_dev *pdev)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
@@ -842,7 +842,7 @@ err_out_enable:
return rc;
}
-static struct pci_device_id __devinitdata pm8001_pci_table[] = {
+static struct pci_device_id pm8001_pci_table[] = {
{
PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
},
@@ -857,7 +857,7 @@ static struct pci_driver pm8001_pci_driver = {
.name = DRV_NAME,
.id_table = pm8001_pci_table,
.probe = pm8001_pci_probe,
- .remove = __devexit_p(pm8001_pci_remove),
+ .remove = pm8001_pci_remove,
.suspend = pm8001_pci_suspend,
.resume = pm8001_pci_resume,
};