Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 300 insertions, 0 deletions

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h
new file mode 100644
index 000000000000..e943f167fb51
--- /dev/null
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.h
@@ -0,0 +1,300 @@
+/*
+ * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family 
+ * of PCI-SCSI IO processors.
+ *
+ * Copyright (C) 1999-2001  Gerard Roudier <groudier@free.fr>
+ *
+ * This driver is derived from the Linux sym53c8xx driver.
+ * Copyright (C) 1998-2000  Gerard Roudier
+ *
+ * The sym53c8xx driver is derived from the ncr53c8xx driver that had been 
+ * a port of the FreeBSD ncr driver to Linux-1.2.13.
+ *
+ * The original ncr driver has been written for 386bsd and FreeBSD by
+ *         Wolfgang Stanglmeier        <wolf@cologne.de>
+ *         Stefan Esser                <se@mi.Uni-Koeln.de>
+ * Copyright (C) 1994  Wolfgang Stanglmeier
+ *
+ * Other major contributions:
+ *
+ * NVRAM detection and reading.
+ * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+ *
+ *-----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef SYM_GLUE_H
+#define SYM_GLUE_H
+
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#ifdef __sparc__
+#  include <asm/irq.h>
+#endif
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport_spi.h>
+#include <scsi/scsi_host.h>
+
+#include "sym53c8xx.h"
+#include "sym_defs.h"
+#include "sym_misc.h"
+
+/*
+ * Configuration addendum for Linux.
+ */
+#define	SYM_CONF_TIMER_INTERVAL		((HZ+1)/2)
+
+#define SYM_OPT_HANDLE_DIR_UNKNOWN
+#define SYM_OPT_HANDLE_DEVICE_QUEUEING
+#define SYM_OPT_LIMIT_COMMAND_REORDERING
+
+/*
+ *  Print a message with severity.
+ */
+#define printf_emerg(args...)	printk(KERN_EMERG args)
+#define	printf_alert(args...)	printk(KERN_ALERT args)
+#define	printf_crit(args...)	printk(KERN_CRIT args)
+#define	printf_err(args...)	printk(KERN_ERR	args)
+#define	printf_warning(args...)	printk(KERN_WARNING args)
+#define	printf_notice(args...)	printk(KERN_NOTICE args)
+#define	printf_info(args...)	printk(KERN_INFO args)
+#define	printf_debug(args...)	printk(KERN_DEBUG args)
+#define	printf(args...)		printk(args)
+
+/*
+ *  A 'read barrier' flushes any data that have been prefetched 
+ *  by the processor due to out of order execution. Such a barrier 
+ *  must notably be inserted prior to looking at data that have 
+ *  been DMAed, assuming that program does memory READs in proper 
+ *  order and that the device ensured proper ordering of WRITEs.
+ *
+ *  A 'write barrier' prevents any previous WRITEs to pass further 
+ *  WRITEs. Such barriers must be inserted each time another agent 
+ *  relies on ordering of WRITEs.
+ *
+ *  Note that, due to posting of PCI memory writes, we also must 
+ *  insert dummy PCI read transactions when some ordering involving 
+ *  both directions over the PCI does matter. PCI transactions are 
+ *  fully ordered in each direction.
+ */
+
+#define MEMORY_READ_BARRIER()	rmb()
+#define MEMORY_WRITE_BARRIER()	wmb()
+
+/*
+ *  IO functions definition for big/little endian CPU support.
+ *  For now, PCI chips are only supported in little endian addressing mode, 
+ */
+
+#ifdef	__BIG_ENDIAN
+
+#define	readw_l2b	readw
+#define	readl_l2b	readl
+#define	writew_b2l	writew
+#define	writel_b2l	writel
+
+#else	/* little endian */
+
+#define	readw_raw	readw
+#define	readl_raw	readl
+#define	writew_raw	writew
+#define	writel_raw	writel
+
+#endif /* endian */
+
+#ifdef	SYM_CONF_CHIP_BIG_ENDIAN
+#error	"Chips in BIG ENDIAN addressing mode are not (yet) supported"
+#endif
+
+/*
+ *  If the CPU and the chip use same endian-ness addressing,
+ *  no byte reordering is needed for script patching.
+ *  Macro cpu_to_scr() is to be used for script patching.
+ *  Macro scr_to_cpu() is to be used for getting a DWORD 
+ *  from the script.
+ */
+
+#define cpu_to_scr(dw)	cpu_to_le32(dw)
+#define scr_to_cpu(dw)	le32_to_cpu(dw)
+
+/*
+ *  Remap some status field values.
+ */
+#define CAM_REQ_CMP		DID_OK
+#define CAM_SEL_TIMEOUT		DID_NO_CONNECT
+#define CAM_CMD_TIMEOUT		DID_TIME_OUT
+#define CAM_REQ_ABORTED		DID_ABORT
+#define CAM_UNCOR_PARITY	DID_PARITY
+#define CAM_SCSI_BUS_RESET	DID_RESET	
+#define CAM_REQUEUE_REQ		DID_SOFT_ERROR
+#define	CAM_UNEXP_BUSFREE	DID_ERROR
+#define	CAM_SCSI_BUSY		DID_BUS_BUSY
+
+#define	CAM_DEV_NOT_THERE	DID_NO_CONNECT
+#define	CAM_REQ_INVALID		DID_ERROR
+#define	CAM_REQ_TOO_BIG		DID_ERROR
+
+#define	CAM_RESRC_UNAVAIL	DID_ERROR
+
+/*
+ *  Remap data direction values.
+ */
+#define CAM_DIR_NONE		DMA_NONE
+#define CAM_DIR_IN		DMA_FROM_DEVICE
+#define CAM_DIR_OUT		DMA_TO_DEVICE
+#define CAM_DIR_UNKNOWN		DMA_BIDIRECTIONAL
+
+/*
+ *  These ones are used as return code from 
+ *  error recovery handlers under Linux.
+ */
+#define SCSI_SUCCESS	SUCCESS
+#define SCSI_FAILED	FAILED
+
+/*
+ *  System specific target data structure.
+ *  None for now, under Linux.
+ */
+/* #define SYM_HAVE_STCB */
+
+/*
+ *  System specific lun data structure.
+ */
+#define SYM_HAVE_SLCB
+struct sym_slcb {
+	u_short	reqtags;	/* Number of tags requested by user */
+	u_short scdev_depth;	/* Queue depth set in select_queue_depth() */
+};
+
+/*
+ *  System specific command data structure.
+ *  Not needed under Linux.
+ */
+/* struct sym_sccb */
+
+/*
+ *  System specific host data structure.
+ */
+struct sym_shcb {
+	/*
+	 *  Chip and controller indentification.
+	 */
+	int		unit;
+	char		inst_name[16];
+	char		chip_name[8];
+	struct pci_dev	*device;
+
+	struct Scsi_Host *host;
+
+	void __iomem *	ioaddr;		/* MMIO kernel io address	*/
+	void __iomem *	ramaddr;	/* RAM  kernel io address	*/
+	u_short		io_ws;		/* IO window size		*/
+	int		irq;		/* IRQ number			*/
+
+	struct timer_list timer;	/* Timer handler link header	*/
+	u_long		lasttime;
+	u_long		settle_time;	/* Resetting the SCSI BUS	*/
+	u_char		settle_time_valid;
+};
+
+/*
+ *  Return the name of the controller.
+ */
+#define sym_name(np) (np)->s.inst_name
+
+struct sym_nvram;
+
+/*
+ * The IO macros require a struct called 's' and are abused in sym_nvram.c
+ */
+struct sym_device {
+	struct pci_dev *pdev;
+	unsigned long mmio_base;
+	unsigned long ram_base;
+	struct {
+		void __iomem *ioaddr;
+		void __iomem *ramaddr;
+	} s;
+	struct sym_chip chip;
+	struct sym_nvram *nvram;
+	u_short device_id;
+	u_char host_id;
+};
+
+/*
+ *  Driver host data structure.
+ */
+struct host_data {
+	struct sym_hcb *ncb;
+};
+
+static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host)
+{
+	return ((struct host_data *)host->hostdata)->ncb;
+}
+
+#include "sym_fw.h"
+#include "sym_hipd.h"
+
+/*
+ *  Set the status field of a CAM CCB.
+ */
+static __inline void 
+sym_set_cam_status(struct scsi_cmnd *cmd, int status)
+{
+	cmd->result &= ~(0xff  << 16);
+	cmd->result |= (status << 16);
+}
+
+/*
+ *  Get the status field of a CAM CCB.
+ */
+static __inline int 
+sym_get_cam_status(struct scsi_cmnd *cmd)
+{
+	return host_byte(cmd->result);
+}
+
+/*
+ *  Build CAM result for a successful IO and for a failed IO.
+ */
+static __inline void sym_set_cam_result_ok(struct sym_ccb *cp, struct scsi_cmnd *cmd, int resid)
+{
+	cmd->resid = resid;
+	cmd->result = (((DID_OK) << 16) + ((cp->ssss_status) & 0x7f));
+}
+void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid);
+
+void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *ccb);
+#define sym_print_addr(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg)
+void sym_xpt_async_bus_reset(struct sym_hcb *np);
+void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target);
+int  sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
+void sym_log_bus_error(struct sym_hcb *np);
+void sym_sniff_inquiry(struct sym_hcb *np, struct scsi_cmnd *cmd, int resid);
+
+#endif /* SYM_GLUE_H */