aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorLinus Torvalds2009-06-11 10:08:33 -0700
committerLinus Torvalds2009-06-11 10:08:33 -0700
commitd3d07d941fd80c173b6d690ded00ee5fb8302e06 (patch)
treef1a82c956e393df9933c8544bb564ef1735384ee /drivers/serial
parent6cd8e300b49332eb9eeda45816c711c198d31505 (diff)
parent54ff328b46e58568c4b3350c2fa3223ef862e5a4 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits) sh: Tie sparseirq in to Kconfig. sh: Wire up sys_rt_tgsigqueueinfo. sh: Fix sys_pwritev() syscall table entry for sh32. sh: Fix sh4a llsc-based cmpxchg() sh: sh7724: Add JPU support sh: sh7724: INTC setting update sh: sh7722 clock framework rewrite sh: sh7366 clock framework rewrite sh: sh7343 clock framework rewrite sh: sh7724 clock framework rewrite V3 sh: sh7723 clock framework rewrite V2 sh: add enable()/disable()/set_rate() to div6 code sh: add AP325RXA mode pin configuration sh: add Migo-R mode pin configuration sh: sh7722 mode pin definitions sh: sh7724 mode pin comments sh: sh7723 mode pin V2 sh: rework mode pin code sh: clock div6 helper code sh: clock div4 frequency table offset fix ...
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/sh-sci.c388
-rw-r--r--drivers/serial/sh-sci.h42
2 files changed, 249 insertions, 181 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index dbf5357a77b3..a4cf1079b312 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -47,12 +47,17 @@
#include <linux/clk.h>
#include <linux/ctype.h>
#include <linux/err.h>
+#include <linux/list.h>
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
#endif
+#ifdef CONFIG_H8300
+#include <asm/gpio.h>
+#endif
+
#include "sh-sci.h"
struct sci_port {
@@ -75,14 +80,22 @@ struct sci_port {
int break_flag;
#ifdef CONFIG_HAVE_CLK
- /* Port clock */
- struct clk *clk;
+ /* Interface clock */
+ struct clk *iclk;
+ /* Data clock */
+ struct clk *dclk;
#endif
+ struct list_head node;
};
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port;
+struct sh_sci_priv {
+ spinlock_t lock;
+ struct list_head ports;
+
+#ifdef CONFIG_HAVE_CLK
+ struct notifier_block clk_nb;
#endif
+};
/* Function prototypes */
static void sci_stop_tx(struct uart_port *port);
@@ -138,9 +151,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
- sci_in(port, SCxSR); /* Dummy read */
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
sci_out(port, SCxTDR, c);
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
@@ -159,12 +171,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
*mstpcrl &= ~mask;
}
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
{
h8300_sci_config(port, sci_enable);
}
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
{
h8300_sci_config(port, sci_disable);
}
@@ -611,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->info->port.tty;
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
if (uart_handle_break(port))
return 0;
@@ -726,19 +738,43 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
static int sci_notifier(struct notifier_block *self,
unsigned long phase, void *p)
{
- int i;
+ struct sh_sci_priv *priv = container_of(self,
+ struct sh_sci_priv, clk_nb);
+ struct sci_port *sci_port;
+ unsigned long flags;
if ((phase == CPUFREQ_POSTCHANGE) ||
- (phase == CPUFREQ_RESUMECHANGE))
- for (i = 0; i < SCI_NPORTS; i++) {
- struct sci_port *s = &sci_ports[i];
- s->port.uartclk = clk_get_rate(s->clk);
- }
+ (phase == CPUFREQ_RESUMECHANGE)) {
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(sci_port, &priv->ports, node)
+ sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
return NOTIFY_OK;
}
-static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+static void sci_clk_enable(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ clk_enable(sci_port->dclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+ if (sci_port->iclk)
+ clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ if (sci_port->iclk)
+ clk_disable(sci_port->iclk);
+
+ clk_disable(sci_port->dclk);
+}
#endif
static int sci_request_irq(struct sci_port *port)
@@ -865,15 +901,11 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
static int sci_startup(struct uart_port *port)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
if (s->enable)
s->enable(port);
-#ifdef CONFIG_HAVE_CLK
- s->clk = clk_get(NULL, "module_clk");
-#endif
-
sci_request_irq(s);
sci_start_tx(port);
sci_start_rx(port, 1);
@@ -883,7 +915,7 @@ static int sci_startup(struct uart_port *port)
static void sci_shutdown(struct uart_port *port)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
sci_stop_rx(port);
sci_stop_tx(port);
@@ -891,11 +923,6 @@ static void sci_shutdown(struct uart_port *port)
if (s->disable)
s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
- clk_put(s->clk);
- s->clk = NULL;
-#endif
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -980,25 +1007,31 @@ static int sci_request_port(struct uart_port *port)
static void sci_config_port(struct uart_port *port, int flags)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
port->type = s->type;
- if (port->flags & UPF_IOREMAP && !port->membase) {
-#if defined(CONFIG_SUPERH64)
- port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
- port->membase = (void __iomem *)port->mapbase;
-#else
+ if (port->membase)
+ return;
+
+ if (port->flags & UPF_IOREMAP) {
port->membase = ioremap_nocache(port->mapbase, 0x40);
-#endif
- dev_err(port->dev, "can't remap port#%d\n", port->line);
+ if (IS_ERR(port->membase))
+ dev_err(port->dev, "can't remap port#%d\n", port->line);
+ } else {
+ /*
+ * For the simple (and majority of) cases where we don't
+ * need to do any remapping, just cast the cookie
+ * directly.
+ */
+ port->membase = (void __iomem *)port->mapbase;
}
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
return -EINVAL;
@@ -1032,63 +1065,60 @@ static struct uart_ops sci_uart_ops = {
#endif
};
-static void __init sci_init_ports(void)
+static void __devinit sci_init_single(struct platform_device *dev,
+ struct sci_port *sci_port,
+ unsigned int index,
+ struct plat_sci_port *p)
{
- static int first = 1;
- int i;
-
- if (!first)
- return;
-
- first = 0;
-
- for (i = 0; i < SCI_NPORTS; i++) {
- sci_ports[i].port.ops = &sci_uart_ops;
- sci_ports[i].port.iotype = UPIO_MEM;
- sci_ports[i].port.line = i;
- sci_ports[i].port.fifosize = 1;
+ sci_port->port.ops = &sci_uart_ops;
+ sci_port->port.iotype = UPIO_MEM;
+ sci_port->port.line = index;
+ sci_port->port.fifosize = 1;
#if defined(__H8300H__) || defined(__H8300S__)
#ifdef __H8300S__
- sci_ports[i].enable = h8300_sci_enable;
- sci_ports[i].disable = h8300_sci_disable;
+ sci_port->enable = h8300_sci_enable;
+ sci_port->disable = h8300_sci_disable;
#endif
- sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
+ sci_port->port.uartclk = CONFIG_CPU_CLOCK;
#elif defined(CONFIG_HAVE_CLK)
- /*
- * XXX: We should use a proper SCI/SCIF clock
- */
- {
- struct clk *clk = clk_get(NULL, "module_clk");
- sci_ports[i].port.uartclk = clk_get_rate(clk);
- clk_put(clk);
- }
+ sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+ sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+ sci_port->enable = sci_clk_enable;
+ sci_port->disable = sci_clk_disable;
#else
#error "Need a valid uartclk"
#endif
- sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
- sci_ports[i].break_timer.function = sci_break_timer;
+ sci_port->break_timer.data = (unsigned long)sci_port;
+ sci_port->break_timer.function = sci_break_timer;
+ init_timer(&sci_port->break_timer);
- init_timer(&sci_ports[i].break_timer);
- }
-}
-
-int __init early_sci_setup(struct uart_port *port)
-{
- if (unlikely(port->line > SCI_NPORTS))
- return -ENODEV;
+ sci_port->port.mapbase = p->mapbase;
+ sci_port->port.membase = p->membase;
- sci_init_ports();
+ sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
+ sci_port->port.flags = p->flags;
+ sci_port->port.dev = &dev->dev;
+ sci_port->type = sci_port->port.type = p->type;
- sci_ports[port->line].port.membase = port->membase;
- sci_ports[port->line].port.mapbase = port->mapbase;
- sci_ports[port->line].port.type = port->type;
+ memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
- return 0;
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct tty_driver *serial_console_device(struct console *co, int *index)
+{
+ struct uart_driver *p = &sci_uart_driver;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+ sci_poll_put_char(port, ch);
+}
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
@@ -1096,25 +1126,27 @@ int __init early_sci_setup(struct uart_port *port)
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
- struct uart_port *port = &serial_console_port->port;
+ struct uart_port *port = co->data;
+ struct sci_port *sci_port = to_sci_port(port);
unsigned short bits;
- int i;
- for (i = 0; i < count; i++) {
- if (*s == 10)
- sci_poll_put_char(port, '\r');
+ if (sci_port->enable)
+ sci_port->enable(port);
- sci_poll_put_char(port, *s++);
- }
+ uart_console_write(port, s, count, serial_console_putchar);
/* wait until fifo is empty and last bit has been transmitted */
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
+
+ if (sci_port->disable);
+ sci_port->disable(port);
}
static int __init serial_console_setup(struct console *co, char *options)
{
+ struct sci_port *sci_port;
struct uart_port *port;
int baud = 115200;
int bits = 8;
@@ -1130,8 +1162,9 @@ static int __init serial_console_setup(struct console *co, char *options)
if (co->index >= SCI_NPORTS)
co->index = 0;
- serial_console_port = &sci_ports[co->index];
- port = &serial_console_port->port;
+ sci_port = &sci_ports[co->index];
+ port = &sci_port->port;
+ co->data = port;
/*
* Also need to check port->type, we don't actually have any
@@ -1141,21 +1174,11 @@ static int __init serial_console_setup(struct console *co, char *options)
*/
if (!port->type)
return -ENODEV;
- if (!port->membase || !port->mapbase)
- return -ENODEV;
-
- port->type = serial_console_port->type;
-
-#ifdef CONFIG_HAVE_CLK
- if (!serial_console_port->clk)
- serial_console_port->clk = clk_get(NULL, "module_clk");
-#endif
- if (port->flags & UPF_IOREMAP)
- sci_config_port(port, 0);
+ sci_config_port(port, 0);
- if (serial_console_port->enable)
- serial_console_port->enable(port);
+ if (sci_port->enable)
+ sci_port->enable(port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1166,22 +1189,21 @@ static int __init serial_console_setup(struct console *co, char *options)
if (ret == 0)
sci_stop_rx(port);
#endif
+ /* TODO: disable clock */
return ret;
}
static struct console serial_console = {
.name = "ttySC",
- .device = uart_console_device,
+ .device = serial_console_device,
.write = serial_console_write,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
- .data = &sci_uart_driver,
};
static int __init sci_console_init(void)
{
- sci_init_ports();
register_console(&serial_console);
return 0;
}
@@ -1207,6 +1229,61 @@ static struct uart_driver sci_uart_driver = {
.cons = SCI_CONSOLE,
};
+
+static int sci_remove(struct platform_device *dev)
+{
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ struct sci_port *p;
+ unsigned long flags;
+
+#ifdef CONFIG_HAVE_CLK
+ cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(p, &priv->ports, node)
+ uart_remove_one_port(&sci_uart_driver, &p->port);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ kfree(priv);
+ return 0;
+}
+
+static int __devinit sci_probe_single(struct platform_device *dev,
+ unsigned int index,
+ struct plat_sci_port *p,
+ struct sci_port *sciport)
+{
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ unsigned long flags;
+ int ret;
+
+ /* Sanity check */
+ if (unlikely(index >= SCI_NPORTS)) {
+ dev_notice(&dev->dev, "Attempting to register port "
+ "%d when only %d are available.\n",
+ index+1, SCI_NPORTS);
+ dev_notice(&dev->dev, "Consider bumping "
+ "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ return 0;
+ }
+
+ sci_init_single(dev, sciport, index, p);
+
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+ if (ret)
+ return ret;
+
+ INIT_LIST_HEAD(&sciport->node);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ list_add(&sciport->node, &priv->ports);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
/*
* Register a set of serial devices attached to a platform device. The
* list is terminated with a zero flags entry, which means we expect
@@ -1216,57 +1293,34 @@ static struct uart_driver sci_uart_driver = {
static int __devinit sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
+ struct sh_sci_priv *priv;
int i, ret = -EINVAL;
- for (i = 0; p && p->flags != 0; p++, i++) {
- struct sci_port *sciport = &sci_ports[i];
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- /* Sanity check */
- if (unlikely(i == SCI_NPORTS)) {
- dev_notice(&dev->dev, "Attempting to register port "
- "%d when only %d are available.\n",
- i+1, SCI_NPORTS);
- dev_notice(&dev->dev, "Consider bumping "
- "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
- break;
- }
+ INIT_LIST_HEAD(&priv->ports);
+ spin_lock_init(&priv->lock);
+ platform_set_drvdata(dev, priv);
- sciport->port.mapbase = p->mapbase;
+#ifdef CONFIG_HAVE_CLK
+ priv->clk_nb.notifier_call = sci_notifier;
+ cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
- if (p->mapbase && !p->membase) {
- if (p->flags & UPF_IOREMAP) {
- p->membase = ioremap_nocache(p->mapbase, 0x40);
- if (IS_ERR(p->membase)) {
- ret = PTR_ERR(p->membase);
- goto err_unreg;
- }
- } else {
- /*
- * For the simple (and majority of) cases
- * where we don't need to do any remapping,
- * just cast the cookie directly.
- */
- p->membase = (void __iomem *)p->mapbase;
- }
+ if (dev->id != -1) {
+ ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
+ if (ret)
+ goto err_unreg;
+ } else {
+ for (i = 0; p && p->flags != 0; p++, i++) {
+ ret = sci_probe_single(dev, i, p, &sci_ports[i]);
+ if (ret)
+ goto err_unreg;
}
-
- sciport->port.membase = p->membase;
-
- sciport->port.irq = p->irqs[SCIx_TXI_IRQ];
- sciport->port.flags = p->flags;
- sciport->port.dev = &dev->dev;
-
- sciport->type = sciport->port.type = p->type;
-
- memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
-
- uart_add_one_port(&sci_uart_driver, &sciport->port);
}
-#ifdef CONFIG_HAVE_CLK
- cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
@@ -1274,50 +1328,36 @@ static int __devinit sci_probe(struct platform_device *dev)
return 0;
err_unreg:
- for (i = i - 1; i >= 0; i--)
- uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
+ sci_remove(dev);
return ret;
}
-static int __devexit sci_remove(struct platform_device *dev)
-{
- int i;
-
-#ifdef CONFIG_HAVE_CLK
- cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
- for (i = 0; i < SCI_NPORTS; i++)
- uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
- return 0;
-}
-
static int sci_suspend(struct platform_device *dev, pm_message_t state)
{
- int i;
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ struct sci_port *p;
+ unsigned long flags;
- for (i = 0; i < SCI_NPORTS; i++) {
- struct sci_port *p = &sci_ports[i];
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(p, &priv->ports, node)
+ uart_suspend_port(&sci_uart_driver, &p->port);
- if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
- uart_suspend_port(&sci_uart_driver, &p->port);
- }
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int sci_resume(struct platform_device *dev)
{
- int i;
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ struct sci_port *p;
+ unsigned long flags;
- for (i = 0; i < SCI_NPORTS; i++) {
- struct sci_port *p = &sci_ports[i];
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(p, &priv->ports, node)
+ uart_resume_port(&sci_uart_driver, &p->port);
- if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
- uart_resume_port(&sci_uart_driver, &p->port);
- }
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
@@ -1339,8 +1379,6 @@ static int __init sci_init(void)
printk(banner);
- sci_init_ports();
-
ret = uart_register_driver(&sci_uart_driver);
if (likely(ret == 0)) {
ret = platform_driver_register(&sci_driver);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d0aa82d7fce0..38072c15b845 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -91,6 +91,9 @@
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -314,7 +317,18 @@
} \
}
-#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
+#ifdef CONFIG_H8300
+/* h8300 don't have SCIF */
+#define CPU_SCIF_FNS(name) \
+ static inline unsigned int sci_##name##_in(struct uart_port *port) \
+ { \
+ return 0; \
+ } \
+ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+ { \
+ }
+#else
+#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
SCI_IN(scif_size, scif_offset); \
@@ -323,6 +337,7 @@
{ \
SCI_OUT(scif_size, scif_offset, value); \
}
+#endif
#define CPU_SCI_FNS(name, sci_offset, sci_size) \
static inline unsigned int sci_##name##_in(struct uart_port* port) \
@@ -360,8 +375,10 @@
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
-#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+ CPU_SCIF_FNS(name)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
@@ -390,7 +407,8 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x24, 16)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
@@ -604,10 +622,21 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCFSR 0x0010
+# define SCASSR 0x0014
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->type == PORT_SCIF)
+ return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
+ if (port->type == PORT_SCIFA)
+ return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
- return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+ return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
}
#elif defined(__H8300H__) || defined(__H8300S__)
static inline int sci_rxd_in(struct uart_port *port)
@@ -757,7 +786,8 @@ static inline int sci_rxd_in(struct uart_port *port)
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
{
if (port->type == PORT_SCIF)