diff options
author | Krishna Yarlagadda | 2022-03-07 22:25:18 +0530 |
---|---|---|
committer | Mark Brown | 2022-03-08 12:28:05 +0000 |
commit | 1b8342cc4a387933780c50f0cf51c94455be7d11 (patch) | |
tree | 3110a8c4a012f12a5f707ce43561379c41931922 /drivers/spi | |
parent | 75a1b44a54bd97500e524cf42e8c81cc632672b3 (diff) |
spi: tegra210-quad: combined sequence mode
Add combined sequence mode supported by Tegra QSPI controller.
For commands which contain cmd, addr, data parts to it, controller
can accept all 3 transfers at once and avoid interrupt for each
transfer. This would improve read & write performance.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220307165519.38380-3-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/spi-tegra210-quad.c | 238 |
1 files changed, 233 insertions, 5 deletions
diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c index 517a348d1c19..66f647f32876 100644 --- a/drivers/spi/spi-tegra210-quad.c +++ b/drivers/spi/spi-tegra210-quad.c @@ -121,14 +121,39 @@ #define QSPI_NUM_DUMMY_CYCLE(x) (((x) & 0xff) << 0) #define QSPI_DUMMY_CYCLES_MAX 0xff +#define QSPI_CMB_SEQ_CMD 0x19c +#define QSPI_COMMAND_VALUE_SET(X) (((x) & 0xFF) << 0) + +#define QSPI_CMB_SEQ_CMD_CFG 0x1a0 +#define QSPI_COMMAND_X1_X2_X4(x) (((x) & 0x3) << 13) +#define QSPI_COMMAND_X1_X2_X4_MASK (0x03 << 13) +#define QSPI_COMMAND_SDR_DDR BIT(12) +#define QSPI_COMMAND_SIZE_SET(x) (((x) & 0xFF) << 0) + +#define QSPI_GLOBAL_CONFIG 0X1a4 +#define QSPI_CMB_SEQ_EN BIT(0) + +#define QSPI_CMB_SEQ_ADDR 0x1a8 +#define QSPI_ADDRESS_VALUE_SET(X) (((x) & 0xFFFF) << 0) + +#define QSPI_CMB_SEQ_ADDR_CFG 0x1ac +#define QSPI_ADDRESS_X1_X2_X4(x) (((x) & 0x3) << 13) +#define QSPI_ADDRESS_X1_X2_X4_MASK (0x03 << 13) +#define QSPI_ADDRESS_SDR_DDR BIT(12) +#define QSPI_ADDRESS_SIZE_SET(x) (((x) & 0xFF) << 0) + #define DATA_DIR_TX BIT(0) #define DATA_DIR_RX BIT(1) #define QSPI_DMA_TIMEOUT (msecs_to_jiffies(1000)) #define DEFAULT_QSPI_DMA_BUF_LEN (64 * 1024) +#define CMD_TRANSFER 0 +#define ADDR_TRANSFER 1 +#define DATA_TRANSFER 2 struct tegra_qspi_soc_data { bool has_dma; + bool cmb_xfer_capable; }; struct tegra_qspi_client_data { @@ -912,7 +937,6 @@ static int tegra_qspi_setup(struct spi_device *spi) cdata = tegra_qspi_parse_cdata_dt(spi); spi->controller_data = cdata; } - spin_lock_irqsave(&tqspi->lock, flags); /* keep default cs state to inactive */ @@ -971,19 +995,179 @@ static void tegra_qspi_transfer_end(struct spi_device *spi) tegra_qspi_writel(tqspi, tqspi->def_command1_reg, QSPI_COMMAND1); } -static int tegra_qspi_transfer_one_message(struct spi_master *master, struct spi_message *msg) +static u32 tegra_qspi_cmd_config(bool is_ddr, u8 bus_width, u8 len) +{ + u32 cmd_config = 0; + + /* Extract Command configuration and value */ + if (is_ddr) + cmd_config |= QSPI_COMMAND_SDR_DDR; + else + cmd_config &= ~QSPI_COMMAND_SDR_DDR; + + cmd_config |= QSPI_COMMAND_X1_X2_X4(bus_width); + cmd_config |= QSPI_COMMAND_SIZE_SET((len * 8) - 1); + + return cmd_config; +} + +static u32 tegra_qspi_addr_config(bool is_ddr, u8 bus_width, u8 len) +{ + u32 addr_config = 0; + + /* Extract Address configuration and value */ + is_ddr = 0; //Only SDR mode supported + bus_width = 0; //X1 mode + + if (is_ddr) + addr_config |= QSPI_ADDRESS_SDR_DDR; + else + addr_config &= ~QSPI_ADDRESS_SDR_DDR; + + addr_config |= QSPI_ADDRESS_X1_X2_X4(bus_width); + addr_config |= QSPI_ADDRESS_SIZE_SET((len * 8) - 1); + + return addr_config; +} + +static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi, + struct spi_message *msg) +{ + bool is_first_msg = true; + struct spi_transfer *xfer; + struct spi_device *spi = msg->spi; + u8 transfer_phase = 0; + u32 cmd1 = 0, dma_ctl = 0; + int ret = 0; + u32 address_value = 0; + u32 cmd_config = 0, addr_config = 0; + u8 cmd_value = 0, val = 0; + + /* Enable Combined sequence mode */ + val = tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG); + val |= QSPI_CMB_SEQ_EN; + tegra_qspi_writel(tqspi, val, QSPI_GLOBAL_CONFIG); + /* Process individual transfer list */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + switch (transfer_phase) { + case CMD_TRANSFER: + /* X1 SDR mode */ + cmd_config = tegra_qspi_cmd_config(false, 0, + xfer->len); + cmd_value = *((const u8 *)(xfer->tx_buf)); + break; + case ADDR_TRANSFER: + /* X1 SDR mode */ + addr_config = tegra_qspi_addr_config(false, 0, + xfer->len); + address_value = *((const u32 *)(xfer->tx_buf)); + break; + case DATA_TRANSFER: + /* Program Command, Address value in register */ + tegra_qspi_writel(tqspi, cmd_value, QSPI_CMB_SEQ_CMD); + tegra_qspi_writel(tqspi, address_value, + QSPI_CMB_SEQ_ADDR); + /* Program Command and Address config in register */ + tegra_qspi_writel(tqspi, cmd_config, + QSPI_CMB_SEQ_CMD_CFG); + tegra_qspi_writel(tqspi, addr_config, + QSPI_CMB_SEQ_ADDR_CFG); + + reinit_completion(&tqspi->xfer_completion); + cmd1 = tegra_qspi_setup_transfer_one(spi, xfer, + is_first_msg); + ret = tegra_qspi_start_transfer_one(spi, xfer, + cmd1); + + if (ret < 0) { + dev_err(tqspi->dev, "Failed to start transfer-one: %d\n", + ret); + return ret; + } + + is_first_msg = false; + ret = wait_for_completion_timeout + (&tqspi->xfer_completion, + QSPI_DMA_TIMEOUT); + + if (WARN_ON(ret == 0)) { + dev_err(tqspi->dev, "QSPI Transfer failed with timeout: %d\n", + ret); + if (tqspi->is_curr_dma_xfer && + (tqspi->cur_direction & DATA_DIR_TX)) + dmaengine_terminate_all + (tqspi->tx_dma_chan); + + if (tqspi->is_curr_dma_xfer && + (tqspi->cur_direction & DATA_DIR_RX)) + dmaengine_terminate_all + (tqspi->rx_dma_chan); + + /* Abort transfer by resetting pio/dma bit */ + if (!tqspi->is_curr_dma_xfer) { + cmd1 = tegra_qspi_readl + (tqspi, + QSPI_COMMAND1); + cmd1 &= ~QSPI_PIO; + tegra_qspi_writel + (tqspi, cmd1, + QSPI_COMMAND1); + } else { + dma_ctl = tegra_qspi_readl + (tqspi, + QSPI_DMA_CTL); + dma_ctl &= ~QSPI_DMA_EN; + tegra_qspi_writel(tqspi, dma_ctl, + QSPI_DMA_CTL); + } + + /* Reset controller if timeout happens */ + if (device_reset(tqspi->dev) < 0) + dev_warn_once(tqspi->dev, + "device reset failed\n"); + ret = -EIO; + goto exit; + } + + if (tqspi->tx_status || tqspi->rx_status) { + dev_err(tqspi->dev, "QSPI Transfer failed\n"); + tqspi->tx_status = 0; + tqspi->rx_status = 0; + ret = -EIO; + goto exit; + } + break; + default: + ret = -EINVAL; + goto exit; + } + msg->actual_length += xfer->len; + transfer_phase++; + } + +exit: + msg->status = ret; + + return ret; +} + +static int tegra_qspi_non_combined_seq_xfer(struct tegra_qspi *tqspi, + struct spi_message *msg) { - struct tegra_qspi *tqspi = spi_master_get_devdata(master); struct spi_device *spi = msg->spi; struct spi_transfer *transfer; bool is_first_msg = true; - int ret; + int ret = 0, val = 0; msg->status = 0; msg->actual_length = 0; tqspi->tx_status = 0; tqspi->rx_status = 0; + /* Disable Combined sequence mode */ + val = tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG); + val &= ~QSPI_CMB_SEQ_EN; + tegra_qspi_writel(tqspi, val, QSPI_GLOBAL_CONFIG); list_for_each_entry(transfer, &msg->transfers, transfer_list) { struct spi_transfer *xfer = transfer; u8 dummy_bytes = 0; @@ -1021,7 +1205,6 @@ static int tegra_qspi_transfer_one_message(struct spi_master *master, struct spi goto complete_xfer; } - is_first_msg = false; ret = wait_for_completion_timeout(&tqspi->xfer_completion, QSPI_DMA_TIMEOUT); if (WARN_ON(ret == 0)) { @@ -1066,7 +1249,48 @@ complete_xfer: ret = 0; exit: msg->status = ret; + + return ret; +} + +static bool tegra_qspi_validate_cmb_seq(struct tegra_qspi *tqspi, + struct spi_message *msg) +{ + int transfer_count = 0; + struct spi_transfer *xfer; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + transfer_count++; + } + if (!tqspi->soc_data->cmb_xfer_capable || transfer_count != 3) + return false; + xfer = list_first_entry(&msg->transfers, typeof(*xfer), + transfer_list); + if (xfer->len > 2) + return false; + xfer = list_next_entry(xfer, transfer_list); + if (xfer->len > 4 || xfer->len < 3) + return false; + xfer = list_next_entry(xfer, transfer_list); + if (!tqspi->soc_data->has_dma || xfer->len > (QSPI_FIFO_DEPTH << 2)) + return false; + + return true; +} + +static int tegra_qspi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct tegra_qspi *tqspi = spi_master_get_devdata(master); + int ret; + + if (tegra_qspi_validate_cmb_seq(tqspi, msg)) + ret = tegra_qspi_combined_seq_xfer(tqspi, msg); + else + ret = tegra_qspi_non_combined_seq_xfer(tqspi, msg); + spi_finalize_current_message(master); + return ret; } @@ -1200,14 +1424,17 @@ static irqreturn_t tegra_qspi_isr_thread(int irq, void *context_data) static struct tegra_qspi_soc_data tegra210_qspi_soc_data = { .has_dma = true, + .cmb_xfer_capable = false, }; static struct tegra_qspi_soc_data tegra186_qspi_soc_data = { .has_dma = true, + .cmb_xfer_capable = true, }; static struct tegra_qspi_soc_data tegra234_qspi_soc_data = { .has_dma = false, + .cmb_xfer_capable = true, }; static const struct of_device_id tegra_qspi_of_match[] = { @@ -1278,6 +1505,7 @@ static int tegra_qspi_probe(struct platform_device *pdev) tqspi->dev = &pdev->dev; spin_lock_init(&tqspi->lock); + tqspi->soc_data = device_get_match_data(&pdev->dev); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); tqspi->base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(tqspi->base)) |