diff options
| author | Vinit Shenoy | 2012-04-17 12:40:13 +0530 |
|---|---|---|
| committer | Grant Likely | 2012-04-17 17:54:05 -0600 |
| commit | eb798c641a34ae9cee9fcacfbe5dd40bd7777607 (patch) | |
| tree | 3cbd69ef2fc8ffae67160b9919548aa38c0af916 /drivers/spi | |
| parent | e816b57a337ea3b755de72bec38c10c864f23015 (diff) | |
spi/pl022: Fix range checking for bits per word
pl022 ssp controller supports word lengths from 4 to 16 (or 32) bits.
Currently implemented checks were incorrect. It has following check
if (pl022->vendor->max_bpw >= 32)
which must be checking for <=.
Also error print message is incorrect, that prints "range is from 1 to
16".
Fix both these issues.
Signed-off-by: Vinit Shenoy <vinit.shenoy@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-pl022.c | 25 |
1 files changed, 9 insertions, 16 deletions
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 09c925aaf320..1ead49dbebce 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1823,9 +1823,12 @@ static int pl022_setup(struct spi_device *spi) } else chip->cs_control = chip_info->cs_control; - if (bits <= 3) { - /* PL022 doesn't support less than 4-bits */ + /* Check bits per word with vendor specific range */ + if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) { status = -ENOTSUPP; + dev_err(&spi->dev, "illegal data size for this controller!\n"); + dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n", + pl022->vendor->max_bpw); goto err_config_params; } else if (bits <= 8) { dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); @@ -1838,20 +1841,10 @@ static int pl022_setup(struct spi_device *spi) chip->read = READING_U16; chip->write = WRITING_U16; } else { - if (pl022->vendor->max_bpw >= 32) { - dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); - chip->n_bytes = 4; - chip->read = READING_U32; - chip->write = WRITING_U32; - } else { - dev_err(&spi->dev, - "illegal data size for this controller!\n"); - dev_err(&spi->dev, - "a standard pl022 can only handle " - "1 <= n <= 16 bit words\n"); - status = -ENOTSUPP; - goto err_config_params; - } + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; } /* Now Initialize all register settings required for this chip */ |