diff options
author | Andy Shevchenko | 2024-03-04 14:27:11 +0200 |
---|---|---|
committer | Greg Kroah-Hartman | 2024-03-05 13:38:29 +0000 |
commit | 1117a6fdc7c14d6fa336cf135e81e716d20d11c1 (patch) | |
tree | f7df974353ec9ebd243c186e972f02c2e7e17f62 /drivers/tty | |
parent | 0087b9e694ee01c61fa4e954198293fff172496d (diff) |
serial: 8250_of: Switch to use uart_read_port_properties()
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240304123035.758700-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/8250/8250_of.c | 99 |
1 files changed, 19 insertions, 80 deletions
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 9dcc17e33269..5d1dd992d8fb 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -69,37 +69,22 @@ static int of_platform_serial_setup(struct platform_device *ofdev, struct device *dev = &ofdev->dev; struct device_node *np = dev->of_node; struct uart_port *port = &up->port; - u32 clk, spd, prop; - int ret, irq; + u32 spd; + int ret; memset(port, 0, sizeof *port); pm_runtime_enable(&ofdev->dev); pm_runtime_get_sync(&ofdev->dev); - if (of_property_read_u32(np, "clock-frequency", &clk)) { - - /* Get clk rate through clk driver if present */ - info->clk = devm_clk_get_enabled(dev, NULL); - if (IS_ERR(info->clk)) { - ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n"); - goto err_pmruntime; - } - - clk = clk_get_rate(info->clk); - } - /* If current-speed was set, then try not to change it. */ - if (of_property_read_u32(np, "current-speed", &spd) == 0) - port->custom_divisor = clk / (16 * spd); - ret = of_address_to_resource(np, 0, &resource); if (ret) { dev_err_probe(dev, ret, "invalid address\n"); goto err_pmruntime; } - port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | - UPF_FIXED_TYPE; + port->dev = &ofdev->dev; + port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE; spin_lock_init(&port->lock); if (resource_type(&resource) == IORESOURCE_IO) { @@ -108,70 +93,31 @@ static int of_platform_serial_setup(struct platform_device *ofdev, } else { port->mapbase = resource.start; port->mapsize = resource_size(&resource); + port->flags |= UPF_IOREMAP; + } - /* Check for shifted address mapping */ - if (of_property_read_u32(np, "reg-offset", &prop) == 0) { - if (prop >= port->mapsize) { - ret = dev_err_probe(dev, -EINVAL, "reg-offset %u exceeds region size %pa\n", - prop, &port->mapsize); - goto err_pmruntime; - } + ret = uart_read_and_validate_port_properties(port); + if (ret) + goto err_pmruntime; - port->mapbase += prop; - port->mapsize -= prop; + /* Get clk rate through clk driver if present */ + if (!port->uartclk) { + info->clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(info->clk)) { + ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n"); + goto err_pmruntime; } - port->iotype = UPIO_MEM; - if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { - switch (prop) { - case 1: - port->iotype = UPIO_MEM; - break; - case 2: - port->iotype = UPIO_MEM16; - break; - case 4: - port->iotype = of_device_is_big_endian(np) ? - UPIO_MEM32BE : UPIO_MEM32; - break; - default: - ret = dev_err_probe(dev, -EINVAL, "unsupported reg-io-width (%u)\n", - prop); - goto err_pmruntime; - } - } - port->flags |= UPF_IOREMAP; + port->uartclk = clk_get_rate(info->clk); } + /* If current-speed was set, then try not to change it. */ + if (of_property_read_u32(np, "current-speed", &spd) == 0) + port->custom_divisor = port->uartclk / (16 * spd); /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */ if (of_device_is_compatible(np, "mrvl,mmp-uart")) port->regshift = 2; - /* Check for registers offset within the devices address range */ - if (of_property_read_u32(np, "reg-shift", &prop) == 0) - port->regshift = prop; - - /* Check for fifo size */ - if (of_property_read_u32(np, "fifo-size", &prop) == 0) - port->fifosize = prop; - - /* Check for a fixed line number */ - ret = of_alias_get_id(np, "serial"); - if (ret >= 0) - port->line = ret; - - irq = of_irq_get(np, 0); - if (irq < 0) { - if (irq == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; - goto err_pmruntime; - } - /* IRQ support not mandatory */ - irq = 0; - } - - port->irq = irq; - info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); if (IS_ERR(info->rst)) { ret = PTR_ERR(info->rst); @@ -183,12 +129,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev, goto err_pmruntime; port->type = type; - port->uartclk = clk; - - if (of_property_read_bool(np, "no-loopback-test")) - port->flags |= UPF_SKIP_TEST; - - port->dev = &ofdev->dev; port->rs485_config = serial8250_em485_config; port->rs485_supported = serial8250_em485_supported; up->rs485_start_tx = serial8250_em485_start_tx; @@ -280,7 +220,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) platform_set_drvdata(ofdev, info); return 0; err_dispose: - irq_dispose_mapping(port8250.port.irq); pm_runtime_put_sync(&ofdev->dev); pm_runtime_disable(&ofdev->dev); err_free: |