diff options
| author | Lukas Wunner | 2020-01-16 13:14:05 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2020-01-22 10:22:30 +0100 |
| commit | 644d776c7729e7a9cc04ee0587a82fe0d83252f0 (patch) | |
| tree | 8363a1510933c0d8508ba57638b4f276470a7248 /drivers/tty | |
| parent | 8c3cde5dd639afc7a17fb1e78f4579735a1c95e6 (diff) | |
serial: 8250_bcm2835aux: Use generic remapping code
On probe the bcm2835aux UART driver misreports the register base address
as 0x0:
ttyS0 at MMIO 0x0 (irq = 53, base_baud = 50000000) is a 16550
That's because the driver remaps the registers itself. Take advantage
of the generic remapping code in serial8250_request_std_resource() to
get a message with the correct address and to simplify the driver.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/7d1a9bdb05090d8e465fd15cd26d6e81538d07f9.1579175223.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_bcm2835aux.c | 8 |
1 files changed, 3 insertions, 5 deletions
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index f03d38e7c3a7..d21460c9ef4b 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -41,7 +41,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) up.port.iotype = UPIO_MEM; up.port.fifosize = 8; up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE | - UPF_SKIP_TEST; + UPF_SKIP_TEST | UPF_IOREMAP; /* get the clock - this also enables the HW */ data->clk = devm_clk_get(&pdev->dev, NULL); @@ -64,10 +64,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) dev_err(&pdev->dev, "memory resource not found"); return -EINVAL; } - up.port.membase = devm_ioremap_resource(&pdev->dev, res); - ret = PTR_ERR_OR_ZERO(up.port.membase); - if (ret) - return ret; + up.port.mapbase = res->start; + up.port.mapsize = resource_size(res); /* Check for a fixed line number */ ret = of_alias_get_id(pdev->dev.of_node, "serial"); |