Merge branch 'sh/rsk-updates' into sh-latest

Conflicts:
	arch/sh/Kconfig

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

5 files changed, 36 insertions, 18 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 24145c30c9b0..6cc4358f68c1 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1073,8 +1073,10 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 		    (new_serial.close_delay != port->close_delay) ||
 		    (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
 		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-		     (port->flags & ~ASYNC_USR_MASK)))
+		     (port->flags & ~ASYNC_USR_MASK))) {
+			tty_unlock();
 			return -EPERM;
+		}
 		port->flags = ((port->flags & ~ASYNC_USR_MASK) |
 			       (new_serial.flags & ASYNC_USR_MASK));
 		state->custom_divisor = new_serial.custom_divisor;
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index e6c3dbd781d6..836fe2731234 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -154,10 +154,9 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
 		port->x_char = 0;
 		return IRQ_HANDLED;
 	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		clps711xuart_stop_tx(port);
-		return IRQ_HANDLED;
-	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+		goto disable_tx_irq;
 
 	count = port->fifosize >> 1;
 	do {
@@ -171,8 +170,11 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	if (uart_circ_empty(xmit))
-		clps711xuart_stop_tx(port);
+	if (uart_circ_empty(xmit)) {
+	disable_tx_irq:
+		disable_irq_nosync(TX_IRQ(port));
+		tx_enabled(port) = 0;
+	}
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index bbbec4a74cfb..c2816f494807 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1447,9 +1447,11 @@ static int pch_uart_verify_port(struct uart_port *port,
 			__func__);
 		return -EOPNOTSUPP;
 #endif
-		priv->use_dma = 1;
 		priv->use_dma_flag = 1;
 		dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
+		if (!priv->use_dma)
+			pch_request_dma(port);
+		priv->use_dma = 1;
 	}
 
 	return 0;
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 08ebe901bb59..654755a990df 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -469,7 +469,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
 	tty = NULL;
 	if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
 		if (!ZS_IS_OPEN(uap_a)) {
-			pmz_debug("ChanA interrupt while open !\n");
+			pmz_debug("ChanA interrupt while not open !\n");
 			goto skip_a;
 		}
 		write_zsreg(uap_a, R0, RES_H_IUS);
@@ -493,8 +493,8 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
 	spin_lock(&uap_b->port.lock);
 	tty = NULL;
 	if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
-		if (!ZS_IS_OPEN(uap_a)) {
-			pmz_debug("ChanB interrupt while open !\n");
+		if (!ZS_IS_OPEN(uap_b)) {
+			pmz_debug("ChanB interrupt while not open !\n");
 			goto skip_b;
 		}
 		write_zsreg(uap_b, R0, RES_H_IUS);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 86dd1e302bb3..29ca20dbd335 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1085,15 +1085,21 @@ void vt_set_led_state(int console, int leds)
  *
  *	Handle console start. This is a wrapper for the VT layer
  *	so that we can keep kbd knowledge internal
+ *
+ *	FIXME: We eventually need to hold the kbd lock here to protect
+ *	the LED updating. We can't do it yet because fn_hold calls stop_tty
+ *	and start_tty under the kbd_event_lock, while normal tty paths
+ *	don't hold the lock. We probably need to split out an LED lock
+ *	but not during an -rc release!
  */
 void vt_kbd_con_start(int console)
 {
 	struct kbd_struct * kbd = kbd_table + console;
-	unsigned long flags;
-	spin_lock_irqsave(&kbd_event_lock, flags);
+/*	unsigned long flags; */
+/*	spin_lock_irqsave(&kbd_event_lock, flags); */
 	clr_vc_kbd_led(kbd, VC_SCROLLOCK);
 	set_leds();
-	spin_unlock_irqrestore(&kbd_event_lock, flags);
+/*	spin_unlock_irqrestore(&kbd_event_lock, flags); */
 }
 
 /**
@@ -1102,22 +1108,28 @@ void vt_kbd_con_start(int console)
  *
  *	Handle console stop. This is a wrapper for the VT layer
  *	so that we can keep kbd knowledge internal
+ *
+ *	FIXME: We eventually need to hold the kbd lock here to protect
+ *	the LED updating. We can't do it yet because fn_hold calls stop_tty
+ *	and start_tty under the kbd_event_lock, while normal tty paths
+ *	don't hold the lock. We probably need to split out an LED lock
+ *	but not during an -rc release!
  */
 void vt_kbd_con_stop(int console)
 {
 	struct kbd_struct * kbd = kbd_table + console;
-	unsigned long flags;
-	spin_lock_irqsave(&kbd_event_lock, flags);
+/*	unsigned long flags; */
+/*	spin_lock_irqsave(&kbd_event_lock, flags); */
 	set_vc_kbd_led(kbd, VC_SCROLLOCK);
 	set_leds();
-	spin_unlock_irqrestore(&kbd_event_lock, flags);
+/*	spin_unlock_irqrestore(&kbd_event_lock, flags); */
 }
 
 /*
  * This is the tasklet that updates LED state on all keyboards
  * attached to the box. The reason we use tasklet is that we
  * need to handle the scenario when keyboard handler is not
- * registered yet but we already getting updates form VT to
+ * registered yet but we already getting updates from the VT to
  * update led state.
  */
 static void kbd_bh(unsigned long dummy)