diff options
author | Marek Szyprowski | 2017-04-03 08:21:00 +0200 |
---|---|---|
committer | Greg Kroah-Hartman | 2017-04-08 18:58:52 +0200 |
commit | 500fcc08a32bfd54f11951ba81530775df15c474 (patch) | |
tree | 94d1be03ffa81ea230f90aebbab6395bf71378fb /drivers/tty | |
parent | 768d64f491a530062ddad50e016fb27125f8bd7c (diff) |
serial: samsung: Add missing checks for dma_map_single failure
This patch adds missing checks for dma_map_single() failure and proper error
reporting. Although this issue was harmless on ARM architecture, it is always
good to use the DMA mapping API in a proper way. This patch fixes the following
DMA API debug warning:
WARNING: CPU: 1 PID: 3785 at lib/dma-debug.c:1171 check_unmap+0x8a0/0xf28
dma-pl330 121a0000.pdma: DMA-API: device driver failed to check map error[device address=0x000000006e0f9000] [size=4096 bytes] [mapped as single]
Modules linked in:
CPU: 1 PID: 3785 Comm: (agetty) Tainted: G W 4.11.0-rc1-00137-g07ca963-dirty #59
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24)
[<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0)
[<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180)
[<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50)
[<c01395a4>] (warn_slowpath_fmt) from [<c072a114>] (check_unmap+0x8a0/0xf28)
[<c072a114>] (check_unmap) from [<c072a834>] (debug_dma_unmap_page+0x98/0xc8)
[<c072a834>] (debug_dma_unmap_page) from [<c0803874>] (s3c24xx_serial_shutdown+0x314/0x52c)
[<c0803874>] (s3c24xx_serial_shutdown) from [<c07f5124>] (uart_port_shutdown+0x54/0x88)
[<c07f5124>] (uart_port_shutdown) from [<c07f522c>] (uart_shutdown+0xd4/0x110)
[<c07f522c>] (uart_shutdown) from [<c07f6a8c>] (uart_hangup+0x9c/0x208)
[<c07f6a8c>] (uart_hangup) from [<c07c426c>] (__tty_hangup+0x49c/0x634)
[<c07c426c>] (__tty_hangup) from [<c07c78ac>] (tty_ioctl+0xc88/0x16e4)
[<c07c78ac>] (tty_ioctl) from [<c03b5f2c>] (do_vfs_ioctl+0xc4/0xd10)
[<c03b5f2c>] (do_vfs_ioctl) from [<c03b6bf4>] (SyS_ioctl+0x7c/0x8c)
[<c03b6bf4>] (SyS_ioctl) from [<c010b4a0>] (ret_fast_syscall+0x0/0x3c)
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Fixes: 62c37eedb74c8 ("serial: samsung: add dma reqest/release functions")
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/samsung.c | 31 |
1 files changed, 24 insertions, 7 deletions
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 9f3759bdb44f..ca0bcd7fd61f 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -859,7 +859,7 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) { struct s3c24xx_uart_dma *dma = p->dma; - unsigned long flags; + int ret; /* Default slave configuration parameters */ dma->rx_conf.direction = DMA_DEV_TO_MEM; @@ -884,8 +884,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) dma->tx_chan = dma_request_chan(p->port.dev, "tx"); if (IS_ERR(dma->tx_chan)) { - dma_release_channel(dma->rx_chan); - return PTR_ERR(dma->tx_chan); + ret = PTR_ERR(dma->tx_chan); + goto err_release_rx; } dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); @@ -894,15 +894,17 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) dma->rx_size = PAGE_SIZE; dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); - if (!dma->rx_buf) { - dma_release_channel(dma->rx_chan); - dma_release_channel(dma->tx_chan); - return -ENOMEM; + ret = -ENOMEM; + goto err_release_tx; } dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf, dma->rx_size, DMA_FROM_DEVICE); + if (dma_mapping_error(p->port.dev, dma->rx_addr)) { + ret = -EIO; + goto err_free_rx; + } spin_lock_irqsave(&p->port.lock, flags); @@ -911,8 +913,23 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) UART_XMIT_SIZE, DMA_TO_DEVICE); spin_unlock_irqrestore(&p->port.lock, flags); + if (dma_mapping_error(p->port.dev, dma->tx_addr)) { + ret = -EIO; + goto err_unmap_rx; + } return 0; + +err_unmap_rx: + dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size, + DMA_FROM_DEVICE); +err_free_rx: + kfree(dma->rx_buf); +err_release_tx: + dma_release_channel(dma->tx_chan); +err_release_rx: + dma_release_channel(dma->rx_chan); + return ret; } static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) |