Merge 5.14-rc5 into driver-core-next

We need the driver core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8 files changed, 37 insertions, 13 deletions

diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 4caab8714e2c..2350fb3bb5e4 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -329,6 +329,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned int iir, lsr;
+	unsigned long flags;
 	unsigned int space, count;
 
 	iir = serial_port_in(port, UART_IIR);
@@ -336,7 +337,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
 	if (iir & UART_IIR_NO_INT)
 		return 0;
 
-	spin_lock(&port->lock);
+	spin_lock_irqsave(&port->lock, flags);
 
 	lsr = serial_port_in(port, UART_LSR);
 
@@ -370,7 +371,7 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
 	if (lsr & UART_LSR_THRE)
 		serial8250_tx_chars(up);
 
-	uart_unlock_and_check_sysrq(port);
+	uart_unlock_and_check_sysrq_irqrestore(port, flags);
 
 	return 1;
 }
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 4e75d2e4f87c..fc65a2293ce9 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -30,10 +30,11 @@ struct fsl8250_data {
 int fsl8250_handle_irq(struct uart_port *port)
 {
 	unsigned char lsr, orig_lsr;
+	unsigned long flags;
 	unsigned int iir;
 	struct uart_8250_port *up = up_to_u8250p(port);
 
-	spin_lock(&up->port.lock);
+	spin_lock_irqsave(&up->port.lock, flags);
 
 	iir = port->serial_in(port, UART_IIR);
 	if (iir & UART_IIR_NO_INT) {
@@ -82,7 +83,7 @@ int fsl8250_handle_irq(struct uart_port *port)
 
 	up->lsr_saved_flags = orig_lsr;
 
-	uart_unlock_and_check_sysrq(&up->port);
+	uart_unlock_and_check_sysrq_irqrestore(&up->port, flags);
 
 	return 1;
 }
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index f7d3023f860f..fb65dc601b23 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -93,10 +93,13 @@ static void mtk8250_dma_rx_complete(void *param)
 	struct dma_tx_state state;
 	int copied, total, cnt;
 	unsigned char *ptr;
+	unsigned long flags;
 
 	if (data->rx_status == DMA_RX_SHUTDOWN)
 		return;
 
+	spin_lock_irqsave(&up->port.lock, flags);
+
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 	total = dma->rx_size - state.residue;
 	cnt = total;
@@ -120,6 +123,8 @@ static void mtk8250_dma_rx_complete(void *param)
 	tty_flip_buffer_push(tty_port);
 
 	mtk8250_rx_dma(up);
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static void mtk8250_rx_dma(struct uart_8250_port *up)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 75827b608fdb..a808c283883e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3836,6 +3836,12 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_VDEVICE(INTEL, 0x0f0c), },
 	{ PCI_VDEVICE(INTEL, 0x228a), },
 	{ PCI_VDEVICE(INTEL, 0x228c), },
+	{ PCI_VDEVICE(INTEL, 0x4b96), },
+	{ PCI_VDEVICE(INTEL, 0x4b97), },
+	{ PCI_VDEVICE(INTEL, 0x4b98), },
+	{ PCI_VDEVICE(INTEL, 0x4b99), },
+	{ PCI_VDEVICE(INTEL, 0x4b9a), },
+	{ PCI_VDEVICE(INTEL, 0x4b9b), },
 	{ PCI_VDEVICE(INTEL, 0x9ce3), },
 	{ PCI_VDEVICE(INTEL, 0x9ce4), },
 
@@ -3996,6 +4002,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
 		if (pci_match_id(pci_use_msi, dev)) {
 			dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
 			pci_set_master(dev);
+			uart.port.flags &= ~UPF_SHARE_IRQ;
 			rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
 		} else {
 			dev_dbg(&dev->dev, "Using legacy interrupts\n");
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 2164290cbd31..1da29a219842 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -311,7 +311,11 @@ static const struct serial8250_config uart_config[] = {
 /* Uart divisor latch read */
 static int default_serial_dl_read(struct uart_8250_port *up)
 {
-	return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+	/* Assign these in pieces to truncate any bits above 7.  */
+	unsigned char dll = serial_in(up, UART_DLL);
+	unsigned char dlm = serial_in(up, UART_DLM);
+
+	return dll | dlm << 8;
 }
 
 /* Uart divisor latch write */
@@ -1297,9 +1301,11 @@ static void autoconfig(struct uart_8250_port *up)
 	serial_out(up, UART_LCR, 0);
 
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	scratch = serial_in(up, UART_IIR) >> 6;
 
-	switch (scratch) {
+	/* Assign this as it is to truncate any bits above 7.  */
+	scratch = serial_in(up, UART_IIR);
+
+	switch (scratch >> 6) {
 	case 0:
 		autoconfig_8250(up);
 		break;
@@ -1893,11 +1899,12 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	bool skip_rx = false;
+	unsigned long flags;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
 
-	spin_lock(&port->lock);
+	spin_lock_irqsave(&port->lock, flags);
 
 	status = serial_port_in(port, UART_LSR);
 
@@ -1923,7 +1930,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		(up->ier & UART_IER_THRI))
 		serial8250_tx_chars(up);
 
-	uart_unlock_and_check_sysrq(port);
+	uart_unlock_and_check_sysrq_irqrestore(port, flags);
 
 	return 1;
 }
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 508128ddfa01..f0e5da77ed6d 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1415,7 +1415,7 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port)
 
 static unsigned int lpuart32_get_mctrl(struct uart_port *port)
 {
-	unsigned int mctrl = 0;
+	unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 	u32 reg;
 
 	reg = lpuart32_read(port, UARTCTRL);
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 0c1e4df52215..ef11860cd69e 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1293,7 +1293,8 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		freq = uartclk;
 	if (freq == 0) {
 		dev_err(dev, "Cannot get clock rate\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_clk;
 	}
 
 	if (xtal) {
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 222032792d6c..eba5b9ecba34 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1045,9 +1045,11 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 
 	if (tup->cdata->fifo_mode_enable_status) {
 		ret = tegra_uart_wait_fifo_mode_enabled(tup);
-		dev_err(tup->uport.dev, "FIFO mode not enabled\n");
-		if (ret < 0)
+		if (ret < 0) {
+			dev_err(tup->uport.dev,
+				"Failed to enable FIFO mode: %d\n", ret);
 			return ret;
+		}
 	} else {
 		/*
 		 * For all tegra devices (up to t210), there is a hardware