diff options
| author | Bin Liu | 2018-07-19 14:39:37 -0500 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2018-07-21 08:38:29 +0200 |
| commit | 249a32b7eeb3edb6897dd38f89651a62163ac4ed (patch) | |
| tree | 66fb6811f6d727c09d048b8401fda320c7d0ca43 /drivers/usb/core | |
| parent | d89b7664f76047e7beca8f07e86f2ccfad085a28 (diff) | |
usb: core: handle hub C_PORT_OVER_CURRENT condition
Based on USB2.0 Spec Section 11.12.5,
"If a hub has per-port power switching and per-port current limiting,
an over-current on one port may still cause the power on another port
to fall below specific minimums. In this case, the affected port is
placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the
port, but PORT_OVER_CURRENT is not set."
so let's check C_PORT_OVER_CURRENT too for over current condition.
Fixes: 08d1dec6f405 ("usb:hub set hub->change_bits when over-current happens")
Cc: <stable@vger.kernel.org>
Tested-by: Alessandro Antenucci <antenucci@korg.it>
Signed-off-by: Bin Liu <b-liu@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/hub.c | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index fcae521df29b..1fb266809966 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1142,10 +1142,14 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (!udev || udev->state == USB_STATE_NOTATTACHED) { /* Tell hub_wq to disconnect the device or - * check for a new connection + * check for a new connection or over current condition. + * Based on USB2.0 Spec Section 11.12.5, + * C_PORT_OVER_CURRENT could be set while + * PORT_OVER_CURRENT is not. So check for any of them. */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || - (portstatus & USB_PORT_STAT_OVERCURRENT)) + (portstatus & USB_PORT_STAT_OVERCURRENT) || + (portchange & USB_PORT_STAT_C_OVERCURRENT)) set_bit(port1, hub->change_bits); } else if (portstatus & USB_PORT_STAT_ENABLE) { |