usb: dwc3: EP clear halt leading to clearing of delayed_status

The usb_ep_clear_halt() API can be called from the function driver, and
translates to dwc3_gadget_ep_set_halt().  This routine is shared with when
the host issues a clear feature ENDPOINT_HALT, and is differentiated by the
protocol argument.  If the following sequence occurs, there can be a
situation where the delayed_status flag is improperly cleared for the wrong
SETUP transaction:

1. Vendor specific control transfer returns USB_GADGET_DELAYED_STATUS.
2. DWC3 gadget sets dwc->delayed_status to '1'.
3. Another function driver issues a usb_ep_clear_halt() call.
4. DWC3 gadget issues dwc3_stop_active_transfer() and sets
   DWC3_EP_PENDING_CLEAR_STALL.
5. EP command complete interrupt triggers for the end transfer, and
   dwc3_ep0_send_delayed_status() is allowed to run, as delayed_status
   is '1' due to step#1.
6. STATUS phase is sent, and delayed_status is cleared.
7. Vendor specific control transfer is finished being handled, and issues
   usb_composite_setup_continue().  This results in queuing of a data
   phase.

Cache the protocol flag so that DWC3 gadget is aware of when the clear halt
is due to a SETUP request from the host versus when it is sourced from a
function driver.  This allows for the EP command complete interrupt to know
if it needs to issue a delayed status phase.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220414073902.21960-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 1064be5518f6..aa8476da222d 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -1080,6 +1080,7 @@ void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
 	unsigned int direction = !dwc->ep0_expect_in;
 
 	dwc->delayed_status = false;
+	dwc->clear_stall_protocol = 0;
 
 	if (dwc->ep0state != EP0_STATUS_PHASE)
 		return;