diff options
| author | Mario Limonciello | 2023-05-15 16:40:58 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2023-05-24 17:32:49 +0100 |
| commit | 643a45387896566ece928daf31554726b6cc3a27 (patch) | |
| tree | ea8e01517b57a34d070376de387ed1586137b792 /drivers/usb/host | |
| parent | ea56ede9117808d706318c3817a09dc1fe897a36 (diff) | |
xhci-pci: Only run d3cold avoidance quirk for s2idle
commit 2a821fc3136d5d99dcb9de152be8a052ca27d870 upstream.
Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").
As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.
Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir")
Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 12 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 2 |
2 files changed, 11 insertions, 3 deletions
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 232e175e4e96..6e4dac71c409 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/acpi.h> #include <linux/reset.h> +#include <linux/suspend.h> #include "xhci.h" #include "xhci-trace.h" @@ -194,7 +195,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) - xhci->quirks |= XHCI_BROKEN_D3COLD; + xhci->quirks |= XHCI_BROKEN_D3COLD_S2I; if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; @@ -609,9 +610,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * Systems with the TI redriver that loses port status change events * need to have the registers polled during D3, so avoid D3cold. */ - if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD)) + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pci_d3cold_disable(pdev); +#ifdef CONFIG_SUSPEND + /* d3cold is broken, but only when s2idle is used */ + if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE && + xhci->quirks & (XHCI_BROKEN_D3COLD_S2I)) + pci_d3cold_disable(pdev); +#endif + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_quirk(hcd); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index dcee7f3207ad..6348cacdc65e 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1895,7 +1895,7 @@ struct xhci_hcd { #define XHCI_DISABLE_SPARSE BIT_ULL(38) #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) -#define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_BROKEN_D3COLD_S2I BIT_ULL(41) #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) |