usb: musb: remove blackfin port

The blackfin architecture is getting removed, so we can clean up
all the special cases in the musb driver.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Acked-by: Bin Liu <b-liu@ti.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[arnd: adding in fixups from Aaron and Stephen]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 182 deletions

diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index a4beba184798..88466622c89f 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -195,8 +195,6 @@
 #define MUSB_HUBADDR_MULTI_TT		0x80
 
 
-#ifndef CONFIG_BLACKFIN
-
 /*
  * Common USB registers
  */
@@ -416,184 +414,4 @@ static inline u8 musb_read_txhubport(struct musb *musb, u8 epnum)
 			  musb->io.busctl_offset(epnum, MUSB_TXHUBPORT));
 }
 
-#else /* CONFIG_BLACKFIN */
-
-#define USB_BASE		USB_FADDR
-#define USB_OFFSET(reg)		(reg - USB_BASE)
-
-/*
- * Common USB registers
- */
-#define MUSB_FADDR		USB_OFFSET(USB_FADDR)	/* 8-bit */
-#define MUSB_POWER		USB_OFFSET(USB_POWER)	/* 8-bit */
-#define MUSB_INTRTX		USB_OFFSET(USB_INTRTX)	/* 16-bit */
-#define MUSB_INTRRX		USB_OFFSET(USB_INTRRX)
-#define MUSB_INTRTXE		USB_OFFSET(USB_INTRTXE)
-#define MUSB_INTRRXE		USB_OFFSET(USB_INTRRXE)
-#define MUSB_INTRUSB		USB_OFFSET(USB_INTRUSB)	/* 8 bit */
-#define MUSB_INTRUSBE		USB_OFFSET(USB_INTRUSBE)/* 8 bit */
-#define MUSB_FRAME		USB_OFFSET(USB_FRAME)
-#define MUSB_INDEX		USB_OFFSET(USB_INDEX)	/* 8 bit */
-#define MUSB_TESTMODE		USB_OFFSET(USB_TESTMODE)/* 8 bit */
-
-/*
- * Additional Control Registers
- */
-
-#define MUSB_DEVCTL		USB_OFFSET(USB_OTG_DEV_CTL)	/* 8 bit */
-
-#define MUSB_LINKINFO		USB_OFFSET(USB_LINKINFO)/* 8 bit */
-#define MUSB_VPLEN		USB_OFFSET(USB_VPLEN)	/* 8 bit */
-#define MUSB_HS_EOF1		USB_OFFSET(USB_HS_EOF1)	/* 8 bit */
-#define MUSB_FS_EOF1		USB_OFFSET(USB_FS_EOF1)	/* 8 bit */
-#define MUSB_LS_EOF1		USB_OFFSET(USB_LS_EOF1)	/* 8 bit */
-
-/* Offsets to endpoint registers */
-#define MUSB_TXMAXP		0x00
-#define MUSB_TXCSR		0x04
-#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
-#define MUSB_RXMAXP		0x08
-#define MUSB_RXCSR		0x0C
-#define MUSB_RXCOUNT		0x10
-#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
-#define MUSB_TXTYPE		0x14
-#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
-#define MUSB_TXINTERVAL		0x18
-#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
-#define MUSB_RXTYPE		0x1C
-#define MUSB_RXINTERVAL		0x20
-#define MUSB_TXCOUNT		0x28
-
-/* Offsets to endpoint registers in indexed model (using INDEX register) */
-#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
-	(0x40 + (_offset))
-
-/* Offsets to endpoint registers in flat models */
-#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
-	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
-
-/* Not implemented - HW has separate Tx/Rx FIFO */
-#define MUSB_TXCSR_MODE			0x0000
-
-static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
-{
-}
-
-static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
-{
-}
-
-static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
-{
-}
-
-static inline u8 musb_read_txfifosz(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u16 musb_read_txfifoadd(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u8 musb_read_rxfifosz(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u8 musb_read_configdata(void __iomem *mbase)
-{
-	return 0;
-}
-
-static inline u16 musb_read_hwvers(void __iomem *mbase)
-{
-	/*
-	 * This register is invisible on Blackfin, actually the MUSB
-	 * RTL version of Blackfin is 1.9, so just hardcode its value.
-	 */
-	return MUSB_HWVERS_1900;
-}
-
-static inline void musb_write_rxfunaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_addr_req)
-{
-}
-
-static inline void musb_write_rxhubaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_h_addr_reg)
-{
-}
-
-static inline void musb_write_rxhubport(void __iomem *mbase, u8 epnum,
-		u8 qh_h_port_reg)
-{
-}
-
-static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_addr_reg)
-{
-}
-
-static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
-		u8 qh_addr_reg)
-{
-}
-
-static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
-		u8 qh_h_port_reg)
-{
-}
-
-static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
-{
-	return 0;
-}
-
-#endif /* CONFIG_BLACKFIN */
-
 #endif	/* __MUSB_REGS_H__ */