Merge tag 'ux500-dma40-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers

From Linus Walleij:
Second set of DMA40 changes: refactorings and device tree
support for the DMA40. Now with MUSB and some platform
data removal.

* tag 'ux500-dma40-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  dmaengine: ste_dma40: Fetch disabled channels from DT
  dmaengine: ste_dma40: Fetch the number of physical channels from DT
  ARM: ux500: Stop passing DMA platform data though AUXDATA
  dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
  dmaengine: ste_dma40_ll: Replace meaningless register set with comment
  dmaengine: ste_dma40: Convert data_width from register bit format to value
  dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s
  ARM: ux500: Remove recently unused stedma40_xfer_dir enums
  dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
  ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one
  dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s
  ARM: ux500: Remove empty function u8500_of_init_devices()
  ARM: ux500: Remove ux500-musb platform registation when booting with DT
  usb: musb: ux500: add device tree probing support
  usb: musb: ux500: attempt to find channels by name before using pdata
  usb: musb: ux500: harden checks for platform data
  usb: musb: ux500: take the dma_mask from coherent_dma_mask
  usb: musb: ux500: move the MUSB HDRC configuration into the driver
  usb: musb: ux500: move channel number knowledge into the driver

2 files changed, 93 insertions, 27 deletions

diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 2c80004e0a83..f0beee7b868e 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -25,11 +25,19 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/usb/musb-ux500.h>
 
 #include "musb_core.h"
 
+static struct musb_hdrc_config ux500_musb_hdrc_config = {
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.num_eps	= 16,
+	.ram_bits	= 16,
+};
+
 struct ux500_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
@@ -187,14 +195,57 @@ static const struct musb_platform_ops ux500_ops = {
 	.set_vbus	= ux500_musb_set_vbus,
 };
 
+static struct musb_hdrc_platform_data *
+ux500_of_probe(struct platform_device *pdev, struct device_node *np)
+{
+	struct musb_hdrc_platform_data *pdata;
+	const char *mode;
+	int strlen;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	mode = of_get_property(np, "dr_mode", &strlen);
+	if (!mode) {
+		dev_err(&pdev->dev, "No 'dr_mode' property found\n");
+		return NULL;
+	}
+
+	if (strlen > 0) {
+		if (!strcmp(mode, "host"))
+			pdata->mode = MUSB_HOST;
+		if (!strcmp(mode, "otg"))
+			pdata->mode = MUSB_OTG;
+		if (!strcmp(mode, "peripheral"))
+			pdata->mode = MUSB_PERIPHERAL;
+	}
+
+	return pdata;
+}
+
 static int ux500_probe(struct platform_device *pdev)
 {
 	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct device_node		*np = pdev->dev.of_node;
 	struct platform_device		*musb;
 	struct ux500_glue		*glue;
 	struct clk			*clk;
 	int				ret = -ENOMEM;
 
+	if (!pdata) {
+		if (np) {
+			pdata = ux500_of_probe(pdev, np);
+			if (!pdata)
+				goto err0;
+
+			pdev->dev.platform_data = pdata;
+		} else {
+			dev_err(&pdev->dev, "no pdata or device tree found\n");
+			goto err0;
+		}
+	}
+
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&pdev->dev, "failed to allocate glue context\n");
@@ -221,14 +272,16 @@ static int ux500_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= pdev->dev.dma_mask;
+	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
 	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
+	musb->dev.of_node		= pdev->dev.of_node;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
 	glue->clk			= clk;
 
 	pdata->platform_ops		= &ux500_ops;
+	pdata->config 			= &ux500_musb_hdrc_config;
 
 	platform_set_drvdata(pdev, glue);
 
@@ -320,12 +373,18 @@ static const struct dev_pm_ops ux500_pm_ops = {
 #define DEV_PM_OPS	NULL
 #endif
 
+static const struct of_device_id ux500_match[] = {
+        { .compatible = "stericsson,db8500-musb", },
+        {}
+};
+
 static struct platform_driver ux500_driver = {
 	.probe		= ux500_probe,
 	.remove		= ux500_remove,
 	.driver		= {
 		.name	= "musb-ux500",
 		.pm	= DEV_PM_OPS,
+		.of_match_table = ux500_match,
 	},
 };
 
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 338120641145..7d80699a5ff7 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -34,6 +34,11 @@
 #include <linux/platform_data/usb-musb-ux500.h>
 #include "musb_core.h"
 
+static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
+					"iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
+static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
+					"oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
+
 struct ux500_dma_channel {
 	struct dma_channel channel;
 	struct ux500_dma_controller *controller;
@@ -48,10 +53,8 @@ struct ux500_dma_channel {
 
 struct ux500_dma_controller {
 	struct dma_controller controller;
-	struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS];
-	struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS];
-	u32	num_rx_channels;
-	u32	num_tx_channels;
+	struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+	struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
 	void *private_data;
 	dma_addr_t phy_base;
 };
@@ -144,19 +147,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
 	struct ux500_dma_channel *ux500_channel = NULL;
 	struct musb *musb = controller->private_data;
 	u8 ch_num = hw_ep->epnum - 1;
-	u32 max_ch;
 
-	/* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated
+	/* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
 	 * to specified hw_ep. For example DMA channel 0 can only be allocated
 	 * to hw_ep 1 and 9.
 	 */
 	if (ch_num > 7)
 		ch_num -= 8;
 
-	max_ch = is_tx ? controller->num_tx_channels :
-			controller->num_rx_channels;
-
-	if (ch_num >= max_ch)
+	if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
 		return NULL;
 
 	ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
@@ -264,7 +263,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
 	struct dma_channel *channel;
 	u8 ch_num;
 
-	for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) {
+	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
 		channel = &controller->rx_channel[ch_num].channel;
 		ux500_channel = channel->private_data;
 
@@ -274,7 +273,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
 			dma_release_channel(ux500_channel->dma_chan);
 	}
 
-	for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) {
+	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
 		channel = &controller->tx_channel[ch_num].channel;
 		ux500_channel = channel->private_data;
 
@@ -295,34 +294,36 @@ static int ux500_dma_controller_start(struct dma_controller *c)
 	struct musb *musb = controller->private_data;
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
-	struct ux500_musb_board_data *data = plat->board_data;
+	struct ux500_musb_board_data *data;
 	struct dma_channel *dma_channel = NULL;
+	char **chan_names;
 	u32 ch_num;
 	u8 dir;
 	u8 is_tx = 0;
 
 	void **param_array;
 	struct ux500_dma_channel *channel_array;
-	u32 ch_count;
 	dma_cap_mask_t mask;
 
-	if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) ||
-		(data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS))
+	if (!plat) {
+		dev_err(musb->controller, "No platform data\n");
 		return -EINVAL;
+	}
 
-	controller->num_rx_channels = data->num_rx_channels;
-	controller->num_tx_channels = data->num_tx_channels;
+	data = plat->board_data;
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* Prepare the loop for RX channels */
 	channel_array = controller->rx_channel;
-	ch_count = data->num_rx_channels;
-	param_array = data->dma_rx_param_array;
+	param_array = data ? data->dma_rx_param_array : NULL;
+	chan_names = (char **)iep_chan_names;
 
 	for (dir = 0; dir < 2; dir++) {
-		for (ch_num = 0; ch_num < ch_count; ch_num++) {
+		for (ch_num = 0;
+		     ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
+		     ch_num++) {
 			ux500_channel = &channel_array[ch_num];
 			ux500_channel->controller = controller;
 			ux500_channel->ch_num = ch_num;
@@ -333,9 +334,15 @@ static int ux500_dma_controller_start(struct dma_controller *c)
 			dma_channel->status = MUSB_DMA_STATUS_FREE;
 			dma_channel->max_len = SZ_16M;
 
-			ux500_channel->dma_chan = dma_request_channel(mask,
-							data->dma_filter,
-							param_array[ch_num]);
+			ux500_channel->dma_chan =
+				dma_request_slave_channel(dev, chan_names[ch_num]);
+
+			if (!ux500_channel->dma_chan)
+				ux500_channel->dma_chan =
+					dma_request_channel(mask,
+							    data->dma_filter,
+							    param_array[ch_num]);
+
 			if (!ux500_channel->dma_chan) {
 				ERR("Dma pipe allocation error dir=%d ch=%d\n",
 					dir, ch_num);
@@ -350,8 +357,8 @@ static int ux500_dma_controller_start(struct dma_controller *c)
 
 		/* Prepare the loop for TX channels */
 		channel_array = controller->tx_channel;
-		ch_count = data->num_tx_channels;
-		param_array = data->dma_tx_param_array;
+		param_array = data ? data->dma_tx_param_array : NULL;
+		chan_names = (char **)oep_chan_names;
 		is_tx = 1;
 	}