diff options
| author | Andreas Mohr | 2009-12-16 21:45:10 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2009-12-23 11:34:12 -0800 |
| commit | 31844d55800e1b93fe75c4d6188a4a44db2e1bbe (patch) | |
| tree | 4b3f4e64f864f6ebb9ba8e073f9aaf09738b6625 /drivers/usb | |
| parent | 70445ae6c669865e464307a155e881096e4a0ae7 (diff) | |
USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
This is a strictly move-only patch to relocate all FTDI device
product ID definitions to their own ftdi_sio_ids.h header
(following the usual *_ids.h kernel tree convention, too),
thus correcting the slightly too messy appearance
(crucial driver defines were stuck somewhere in the decaying middle swamp
of the huge existing header).
Compile-tested, based on latest mainline git.
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 1 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.h | 959 | ||||
| -rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 959 |
3 files changed, 964 insertions, 955 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f99498fca99a..216f187582ab 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -44,6 +44,7 @@ #include <linux/serial.h> #include <linux/usb/serial.h> #include "ftdi_sio.h" +#include "ftdi_sio_ids.h" /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 4586a24fafb0..b0e0d64f822e 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,7 +1,10 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - + * Driver definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) * + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h + * + * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other @@ -17,880 +20,7 @@ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * - * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais - * from Rudolf Gugler - * - */ - -#define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ -#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ -#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ -#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ - -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 - -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ - -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ - -/* www.candapter.com Ewert Energy Systems CANdapter device */ -#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ - -/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ -/* the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ -#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ -#define FTDI_SCS_DEVICE_2_PID 0xD012 -#define FTDI_SCS_DEVICE_3_PID 0xD013 -#define FTDI_SCS_DEVICE_4_PID 0xD014 -#define FTDI_SCS_DEVICE_5_PID 0xD015 -#define FTDI_SCS_DEVICE_6_PID 0xD016 -#define FTDI_SCS_DEVICE_7_PID 0xD017 - -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 - - -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ - -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ - - -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ - -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ - -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 - -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB - -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 - -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ - -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ - -/* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 - -/* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) - */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ - -/* OOCDlink by Joern Kaipf <joernk@web.de> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ - -/* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. - */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ - -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ - -/* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 - -/* - * ASK.fr devices - */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ - -/* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) - */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ - -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 - -/* - * Home Electronics (www.home-electro.com) USB gadgets - */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ - -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ - -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ - -#define FTDI_TNC_X_PID 0xEBE0 - -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ - -/* - * Definitions for ID TECH (www.idt-net.com) devices - */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ - -/* - * Definitions for Omnidirectional Control Technology, Inc. devices - */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ - -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ - -/* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ - */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ - -/* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ - */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ - -/* - * Protego product ids - */ -#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ -#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ -#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ -#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ - -/* - * Gude Analog- und Digitalsysteme GmbH - */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F - -/* - * Linx Technologies product ids - */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ - -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 - -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 - -/* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI - */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 - -/* - * Falcom Wireless Communications GmbH - */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ - -/* - * SUUNTO product ids - */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ - -/* - * Oceanic product ids - */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ - -/* - * TTi (Thurlby Thandar Instruments) - */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ - -/* - * Definitions for B&B Electronics products. - */ -#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ -#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ -#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ -#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ -#define BANDB_USOPTL4_PID 0xAC11 -#define BANDB_USPTL4_PID 0xAC12 -#define BANDB_USO9ML2DR_2_PID 0xAC16 -#define BANDB_USO9ML2DR_PID 0xAC17 -#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ -#define BANDB_USOPTL4DR_PID 0xAC19 -#define BANDB_485USB9F_2W_PID 0xAC25 -#define BANDB_485USB9F_4W_PID 0xAC26 -#define BANDB_232USB9M_PID 0xAC27 -#define BANDB_485USBTB_2W_PID 0xAC33 -#define BANDB_485USBTB_4W_PID 0xAC34 -#define BANDB_TTL5USB9M_PID 0xAC49 -#define BANDB_TTL3USB9M_PID 0xAC50 -#define BANDB_ZZ_PROG1_USB_PID 0xBA02 - -/* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> - * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. - * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). - */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F - -/* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. - */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ - -/* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. - */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ - -/* - * NDI (www.ndigital.com) product ids - */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ - -/* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) - */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ - -/* - * Westrex International devices submitted by Cory Lee - */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ - -/* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) - */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ - -/* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. - */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ - -/* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden - */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ - -/* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ - -/* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. - */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ - -/* - * ThorLabs USB motor drivers - */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ - -/* - * Testo products (http://www.testo.com/) - * Submitted by Colin Leroy - */ -#define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 - -/* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. - */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ - -/* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. - */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ - -/* - * Telldus Technologies - */ -#define TELLDUS_VID 0x1781 /* Vendor ID */ -#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ - -/* - * IBS elektronik product ids - * Submitted by Thomas Schleusener - */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ - -/* - * MaxStream devices www.maxstream.net - */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 - -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 - -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ - -/* - * The Mobility Lab (TML) - * Submitted by Pierre Castella - */ -#define TML_VID 0x1B91 /* Vendor ID */ -#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ - -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - -/* Alti-2 products http://www.alti-2.com */ -#define ALTI2_VID 0x1BC9 -#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ @@ -910,86 +40,6 @@ #define INTERFACE_C 3 #define INTERFACE_D 4 -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte <laforge@openmoko.org> - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - -/* - * Dresden Elektronic Sensor Terminal Board - */ -#define DE_VID 0x1cf1 /* Vendor ID */ -#define STB_PID 0x0001 /* Sensor Terminal Board */ -#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ - -/* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice - */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 - -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 - -/* - * Marvell SheevaPlug - */ -#define MARVELL_VID 0x9e88 -#define MARVELL_SHEEVAPLUG_PID 0x9e8f - -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - -/* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) - */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 /* * BmRequestType: 1100 0000b @@ -1504,4 +554,3 @@ typedef enum { * B2..7 Length of message - (not including Byte 0) * */ - diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h new file mode 100644 index 000000000000..2b5017bd4538 --- /dev/null +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -0,0 +1,959 @@ +/* + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais + * from Rudolf Gugler + * + */ + +#define FTDI_VID 0x0403 /* Vendor Id */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 + +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + +/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ + + +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ + +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + +/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ +/* they use the ftdi chipset for the USB interface and the vendor id is the same */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ + +/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ +/* broadband internet service. The following PID is exhibited by the usb device supplied */ +/* (the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* + * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device + * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) + * (the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +/* + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) + */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ + +/* OOCDlink by Joern Kaipf <joernk@web.de> + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 + +/* + * The following are the values for the Perle Systems + * UltraPort USB serial converters + */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ + +/* + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) + */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ + +/* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +/* + * Icom ID-1 digital transceiver + */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* + * DSS-20 Sync Station for Sony Ericsson P800 + */ +#define FTDI_DSS20_PID 0xFC82 + +/* + * Home Electronics (www.home-electro.com) USB gadgets + */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ + +/* + * Definitions for ID TECH (www.idt-net.com) devices + */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ + +/* + * Definitions for Omnidirectional Control Technology, Inc. devices + */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ + +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ + +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ + +/* + * Protego product ids + */ +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ + +/* + * Gude Analog- und Digitalsysteme GmbH + */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F + +/* + * Linx Technologies product ids + */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ + +/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ +/* unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + */ +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 + +/* + * Falcom Wireless Communications GmbH + */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* + * TTi (Thurlby Thandar Instruments) + */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* + * Definitions for B&B Electronics products. + */ +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ +#define BANDB_USOPTL4_PID 0xAC11 +#define BANDB_USPTL4_PID 0xAC12 +#define BANDB_USO9ML2DR_2_PID 0xAC16 +#define BANDB_USO9ML2DR_PID 0xAC17 +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ +#define BANDB_USOPTL4DR_PID 0xAC19 +#define BANDB_485USB9F_2W_PID 0xAC25 +#define BANDB_485USB9F_4W_PID 0xAC26 +#define BANDB_232USB9M_PID 0xAC27 +#define BANDB_485USBTB_2W_PID 0xAC33 +#define BANDB_485USBTB_4W_PID 0xAC34 +#define BANDB_TTL5USB9M_PID 0xAC49 +#define BANDB_TTL3USB9M_PID 0xAC50 +#define BANDB_ZZ_PROG1_USB_PID 0xBA02 + +/* + * RM Michaelides CANview USB (http://www.rmcan.com) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. + */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ + +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ + +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> + * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. + * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. + */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F + +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden + */ + +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ + +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ + +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + +/* + * IBS elektronik product ids + * Submitted by Thomas Schleusener + */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ + +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + +/* + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte <laforge@openmoko.org> + */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + +/* + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ + */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 + +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 + +/* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + |