diff options
| author | Linus Torvalds | 2020-01-29 10:09:44 -0800 |
|---|---|---|
| committer | Linus Torvalds | 2020-01-29 10:09:44 -0800 |
| commit | aac96626713fe167c672f9a008be0f514aa3e237 (patch) | |
| tree | 3bf0db49fcb5124ee3ebf2ebe12e22f228b52409 /drivers/usb | |
| parent | 6ba3d7066c71d2103da255df19eb613d299bab15 (diff) | |
| parent | eaa519983fd9e53c2a62a1e56777e1fb461865a9 (diff) | |
Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt/PHY driver updates from Greg KH:
"Here is the big USB and Thunderbolt and PHY driver updates for
5.6-rc1.
With the advent of USB4, "Thunderbolt" has really become USB4, so the
renaming of the Kconfig option and starting to share subsystem code
has begun, hence both subsystems coming in through the same tree here.
PHY driver updates also touched USB drivers, so that is coming in
through here as well.
Major stuff included in here are:
- USB 4 initial support added (i.e. Thunderbolt)
- musb driver updates
- USB gadget driver updates
- PHY driver updates
- USB PHY driver updates
- lots of USB serial stuff fixed up
- USB typec updates
- USB-IP fixes
- lots of other smaller USB driver updates
All of these have been in linux-next for a while now (the usb-serial
tree is already tested in linux-next on its own before merged into
here), with no reported issues"
[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
that causes configuration warnings - Linus ]
* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
Doc: ABI: add usb charger uevent
usb: phy: show USB charger type for user
usb: cdns3: fix spelling mistake and rework grammar in text
usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
USB: serial: ir-usb: simplify endpoint check
USB: serial: ir-usb: make set_termios synchronous
USB: serial: ir-usb: fix IrLAP framing
USB: serial: ir-usb: fix link-speed handling
USB: serial: ir-usb: add missing endpoint sanity check
usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
usb: typec: tcpci: mask event interrupts when remove driver
usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
usb: chipidea: handle single role for usb role class
usb: musb: fix spelling mistake: "periperal" -> "peripheral"
phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
USB: usbfs: Always unlink URBs in reverse order
...
Diffstat (limited to 'drivers/usb')
97 files changed, 3685 insertions, 1363 deletions
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig index 2a1e89d12ed9..84716d216ae5 100644 --- a/drivers/usb/cdns3/Kconfig +++ b/drivers/usb/cdns3/Kconfig @@ -53,4 +53,14 @@ config USB_CDNS3_TI e.g. J721e. +config USB_CDNS3_IMX + tristate "Cadence USB3 support on NXP i.MX platforms" + depends on ARCH_MXC || COMPILE_TEST + default USB_CDNS3 + help + Say 'Y' or 'M' here if you are building for NXP i.MX + platforms that contain Cadence USB3 controller core. + + For example, imx8qm and imx8qxp. + endif diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile index 948e6b88d1a9..d47e341a6f39 100644 --- a/drivers/usb/cdns3/Makefile +++ b/drivers/usb/cdns3/Makefile @@ -15,3 +15,4 @@ cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o +obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c new file mode 100644 index 000000000000..aba988e71958 --- /dev/null +++ b/drivers/usb/cdns3/cdns3-imx.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller + * + * Copyright (C) 2019 NXP + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/iopoll.h> + +#define USB3_CORE_CTRL1 0x00 +#define USB3_CORE_CTRL2 0x04 +#define USB3_INT_REG 0x08 +#define USB3_CORE_STATUS 0x0c +#define XHCI_DEBUG_LINK_ST 0x10 +#define XHCI_DEBUG_BUS 0x14 +#define USB3_SSPHY_CTRL1 0x40 +#define USB3_SSPHY_CTRL2 0x44 +#define USB3_SSPHY_STATUS 0x4c +#define USB2_PHY_CTRL1 0x50 +#define USB2_PHY_CTRL2 0x54 +#define USB2_PHY_STATUS 0x5c + +/* Register bits definition */ + +/* USB3_CORE_CTRL1 */ +#define SW_RESET_MASK (0x3f << 26) +#define PWR_SW_RESET BIT(31) +#define APB_SW_RESET BIT(30) +#define AXI_SW_RESET BIT(29) +#define RW_SW_RESET BIT(28) +#define PHY_SW_RESET BIT(27) +#define PHYAHB_SW_RESET BIT(26) +#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \ + RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET) +#define OC_DISABLE BIT(9) +#define MDCTRL_CLK_SEL BIT(7) +#define MODE_STRAP_MASK (0x7) +#define DEV_MODE (1 << 2) +#define HOST_MODE (1 << 1) +#define OTG_MODE (1 << 0) + +/* USB3_INT_REG */ +#define CLK_125_REQ BIT(29) +#define LPM_CLK_REQ BIT(28) +#define DEVU3_WAEKUP_EN BIT(14) +#define OTG_WAKEUP_EN BIT(12) +#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */ +#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */ + +/* USB3_CORE_STATUS */ +#define MDCTRL_CLK_STATUS BIT(15) +#define DEV_POWER_ON_READY BIT(13) +#define HOST_POWER_ON_READY BIT(12) + +/* USB3_SSPHY_STATUS */ +#define CLK_VALID_MASK (0x3f << 26) +#define CLK_VALID_COMPARE_BITS (0xf << 28) +#define PHY_REFCLK_REQ (1 << 0) + +struct cdns_imx { + struct device *dev; + void __iomem *noncore; + struct clk_bulk_data *clks; + int num_clks; +}; + +static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset) +{ + return readl(data->noncore + offset); +} + +static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value) +{ + writel(value, data->noncore + offset); +} + +static const struct clk_bulk_data imx_cdns3_core_clks[] = { + { .id = "usb3_lpm_clk" }, + { .id = "usb3_bus_clk" }, + { .id = "usb3_aclk" }, + { .id = "usb3_ipg_clk" }, + { .id = "usb3_core_pclk" }, +}; + +static int cdns_imx_noncore_init(struct cdns_imx *data) +{ + u32 value; + int ret; + struct device *dev = data->dev; + + cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK); + udelay(1); + ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value, + (value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS, + 10, 100000); + if (ret) { + dev_err(dev, "wait clkvld timeout\n"); + return ret; + } + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value |= ALL_SW_RESET; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + udelay(1); + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + value = cdns_imx_readl(data, USB3_INT_REG); + value |= HOST_INT1_EN | DEV_INT_EN; + cdns_imx_writel(data, USB3_INT_REG, value); + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value &= ~ALL_SW_RESET; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + return ret; +} + +static int cdns_imx_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct cdns_imx *data; + int ret; + + if (!node) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + data->dev = dev; + data->noncore = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->noncore)) { + dev_err(dev, "can't map IOMEM resource\n"); + return PTR_ERR(data->noncore); + } + + data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks); + data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks; + ret = devm_clk_bulk_get(dev, data->num_clks, data->clks); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(data->num_clks, data->clks); + if (ret) + return ret; + + ret = cdns_imx_noncore_init(data); + if (ret) + goto err; + + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to create children: %d\n", ret); + goto err; + } + + return ret; + +err: + clk_bulk_disable_unprepare(data->num_clks, data->clks); + return ret; +} + +static int cdns_imx_remove_core(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + +static int cdns_imx_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + device_for_each_child(dev, NULL, cdns_imx_remove_core); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id cdns_imx_of_match[] = { + { .compatible = "fsl,imx8qm-usb3", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cdns_imx_of_match); + +static struct platform_driver cdns_imx_driver = { + .probe = cdns_imx_probe, + .remove = cdns_imx_remove, + .driver = { + .name = "cdns3-imx", + .of_match_table = cdns_imx_of_match, + }, +}; +module_platform_driver(cdns_imx_driver); + +MODULE_ALIAS("platform:cdns3-imx"); +MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer"); diff --git a/drivers/usb/cdns3/debug.h b/drivers/usb/cdns3/debug.h index 2c9afbfe988b..a5c6a29e1340 100644 --- a/drivers/usb/cdns3/debug.h +++ b/drivers/usb/cdns3/debug.h @@ -140,7 +140,7 @@ static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep, trb_per_sector = TRBS_PER_SEGMENT; if (trb_per_sector > TRBS_PER_SEGMENT) { - sprintf(str + ret, "\t\tTo big transfer ring %d\n", + sprintf(str + ret, "\t\tTransfer ring %d too big\n", trb_per_sector); return str; } diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 02f6ca2cb1ba..736b0c6e27fe 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -71,6 +71,23 @@ static int __cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags); +static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request); + +static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request); + +/** + * cdns3_clear_register_bit - clear bit in given register. + * @ptr: address of device controller register to be read and changed + * @mask: bits requested to clar + */ +void cdns3_clear_register_bit(void __iomem *ptr, u32 mask) +{ + mask = readl(ptr) & ~mask; + writel(mask, ptr); +} + /** * cdns3_set_register_bit - set bit in given register. * @ptr: address of device controller register to be read and changed @@ -150,6 +167,21 @@ void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep) writel(ep, &priv_dev->regs->ep_sel); } +/** + * cdns3_get_tdl - gets current tdl for selected endpoint. + * @priv_dev: extended gadget object + * + * Before calling this function the appropriate endpoint must + * be selected by means of cdns3_select_ep function. + */ +static int cdns3_get_tdl(struct cdns3_device *priv_dev) +{ + if (priv_dev->dev_ver < DEV_VER_V3) + return EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd)); + else + return readl(&priv_dev->regs->ep_tdl); +} + dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb) { @@ -166,7 +198,22 @@ int cdns3_ring_size(struct cdns3_endpoint *priv_ep) case USB_ENDPOINT_XFER_CONTROL: return TRB_CTRL_RING_SIZE; default: - return TRB_RING_SIZE; + if (priv_ep->use_streams) + return TRB_STREAM_RING_SIZE; + else + return TRB_RING_SIZE; + } +} + +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (priv_ep->trb_pool) { + dma_free_coherent(priv_dev->sysdev, + cdns3_ring_size(priv_ep), + priv_ep->trb_pool, priv_ep->trb_pool_dma); + priv_ep->trb_pool = NULL; } } @@ -180,8 +227,12 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; int ring_size = cdns3_ring_size(priv_ep); + int num_trbs = ring_size / TRB_SIZE; struct cdns3_trb *link_trb; + if (priv_ep->trb_pool && priv_ep->alloc_ring_size < ring_size) + cdns3_free_trb_pool(priv_ep); + if (!priv_ep->trb_pool) { priv_ep->trb_pool = dma_alloc_coherent(priv_dev->sysdev, ring_size, @@ -189,32 +240,30 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) GFP_DMA32 | GFP_ATOMIC); if (!priv_ep->trb_pool) return -ENOMEM; - } else { + + priv_ep->alloc_ring_size = ring_size; memset(priv_ep->trb_pool, 0, ring_size); } + priv_ep->num_trbs = num_trbs; + if (!priv_ep->num) return 0; - priv_ep->num_trbs = ring_size / TRB_SIZE; - /* Initialize the last TRB as Link TRB. */ + /* Initialize the last TRB as Link TRB */ link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1)); - link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); - link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; - - return 0; -} -static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep) -{ - struct cdns3_device *priv_dev = priv_ep->cdns3_dev; - - if (priv_ep->trb_pool) { - dma_free_coherent(priv_dev->sysdev, - cdns3_ring_size(priv_ep), - priv_ep->trb_pool, priv_ep->trb_pool_dma); - priv_ep->trb_pool = NULL; + if (priv_ep->use_streams) { + /* + * For stream capable endpoints driver use single correct TRB. + * The last trb has zeroed cycle bit + */ + link_trb->control = 0; + } else { + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); + link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; } + return 0; } /** @@ -253,6 +302,7 @@ void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev) priv_dev->onchip_used_size = 0; priv_dev->out_mem_is_allocated = 0; priv_dev->wait_for_setup = 0; + priv_dev->using_streams = 0; } /** @@ -356,17 +406,43 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev, { struct usb_request *request; int ret = 0; + u8 pending_empty = list_empty(&priv_ep->pending_req_list); + + /* + * If the last pending transfer is INTERNAL + * OR streams are enabled for this endpoint + * do NOT start new transfer till the last one is pending + */ + if (!pending_empty) { + struct cdns3_request *priv_req; + + request = cdns3_next_request(&priv_ep->pending_req_list); + priv_req = to_cdns3_request(request); + if ((priv_req->flags & REQUEST_INTERNAL) || + (priv_ep->flags & EP_TDLCHK_EN) || + priv_ep->use_streams) { + trace_printk("Blocking external request\n"); + return ret; + } + } while (!list_empty(&priv_ep->deferred_req_list)) { request = cdns3_next_request(&priv_ep->deferred_req_list); - ret = cdns3_ep_run_transfer(priv_ep, request); + if (!priv_ep->use_streams) { + ret = cdns3_ep_run_transfer(priv_ep, request); + } else { + priv_ep->stream_sg_idx = 0; + ret = cdns3_ep_run_stream_transfer(priv_ep, request); + } if (ret) return ret; list_del(&request->list); list_add_tail(&request->list, &priv_ep->pending_req_list); + if (request->stream_id != 0 || (priv_ep->flags & EP_TDLCHK_EN)) + break; } priv_ep->flags &= ~EP_RING_FULL; @@ -379,7 +455,7 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev, * buffer for unblocking on-chip FIFO buffer. This flag will be cleared * if before first DESCMISS interrupt the DMA will be armed. */ -#define cdns3_wa2_enable_detection(priv_dev, ep_priv, reg) do { \ +#define cdns3_wa2_enable_detection(priv_dev, priv_ep, reg) do { \ if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \ priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \ (reg) |= EP_STS_EN_DESCMISEN; \ @@ -450,10 +526,17 @@ struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev, if (!req) return NULL; + /* unmap the gadget request before copying data */ + usb_gadget_unmap_request_by_dev(priv_dev->sysdev, req, + priv_ep->dir); + cdns3_wa2_descmiss_copy_data(priv_ep, req); if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) && req->length != req->actual) { /* wait for next part of transfer */ + /* re-map the gadget request buffer*/ + usb_gadget_map_request_by_dev(priv_dev->sysdev, req, + usb_endpoint_dir_in(priv_ep->endpoint.desc)); return NULL; } @@ -570,6 +653,13 @@ static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep) { struct cdns3_request *priv_req; struct usb_request *request; + u8 pending_empty = list_empty(&priv_ep->pending_req_list); + + /* check for pending transfer */ + if (!pending_empty) { + trace_cdns3_wa2(priv_ep, "Ignoring Descriptor missing IRQ\n"); + return; + } if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) { priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET; @@ -578,8 +668,10 @@ static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep) trace_cdns3_wa2(priv_ep, "Description Missing detected\n"); - if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) + if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) { + trace_cdns3_wa2(priv_ep, "WA2 overflow\n"); cdns3_wa2_remove_old_request(priv_ep); + } request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint, GFP_ATOMIC); @@ -621,6 +713,78 @@ err: "Failed: No sufficient memory for DESCMIS\n"); } +static void cdns3_wa2_reset_tdl(struct cdns3_device *priv_dev) +{ + u16 tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd)); + + if (tdl) { + u16 reset_val = EP_CMD_TDL_MAX + 1 - tdl; + + writel(EP_CMD_TDL_SET(reset_val) | EP_CMD_STDL, + &priv_dev->regs->ep_cmd); + } +} + +static void cdns3_wa2_check_outq_status(struct cdns3_device *priv_dev) +{ + u32 ep_sts_reg; + + /* select EP0-out */ + cdns3_select_ep(priv_dev, 0); + + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + + if (EP_STS_OUTQ_VAL(ep_sts_reg)) { + u32 outq_ep_num = EP_STS_OUTQ_NO(ep_sts_reg); + struct cdns3_endpoint *outq_ep = priv_dev->eps[outq_ep_num]; + + if ((outq_ep->flags & EP_ENABLED) && !(outq_ep->use_streams) && + outq_ep->type != USB_ENDPOINT_XFER_ISOC && outq_ep_num) { + u8 pending_empty = list_empty(&outq_ep->pending_req_list); + + if ((outq_ep->flags & EP_QUIRK_EXTRA_BUF_DET) || + (outq_ep->flags & EP_QUIRK_EXTRA_BUF_EN) || + !pending_empty) { + } else { + u32 ep_sts_en_reg; + u32 ep_cmd_reg; + + cdns3_select_ep(priv_dev, outq_ep->num | + outq_ep->dir); + ep_sts_en_reg = readl(&priv_dev->regs->ep_sts_en); + ep_cmd_reg = readl(&priv_dev->regs->ep_cmd); + + outq_ep->flags |= EP_TDLCHK_EN; + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, + EP_CFG_TDL_CHK); + + cdns3_wa2_enable_detection(priv_dev, outq_ep, + ep_sts_en_reg); + writel(ep_sts_en_reg, + &priv_dev->regs->ep_sts_en); + /* reset tdl value to zero */ + cdns3_wa2_reset_tdl(priv_dev); + /* + * Memory barrier - Reset tdl before ringing the + * doorbell. + */ + wmb(); + if (EP_CMD_DRDY & ep_cmd_reg) { + trace_cdns3_wa2(outq_ep, "Enabling WA2 skipping doorbell\n"); + + } else { + trace_cdns3_wa2(outq_ep, "Enabling WA2 ringing doorbell\n"); + /* + * ring doorbell to generate DESCMIS irq + */ + writel(EP_CMD_DRDY, + &priv_dev->regs->ep_cmd); + } + } + } + } +} + /** * cdns3_gadget_giveback - call struct usb_request's ->complete callback * @priv_ep: The endpoint to whom the request belongs to @@ -807,14 +971,120 @@ static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev, cdns3_wa1_restore_cycle_bit(priv_ep); } +static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_request *priv_req; + struct cdns3_trb *trb; + dma_addr_t trb_dma; + int address; + u32 control; + u32 length; + u32 tdl; + unsigned int sg_idx = priv_ep->stream_sg_idx; + + priv_req = to_cdns3_request(request); + address = priv_ep->endpoint.desc->bEndpointAddress; + + priv_ep->flags |= EP_PENDING_REQUEST; + + /* must allocate buffer aligned to 8 */ + if (priv_req->flags & REQUEST_UNALIGNED) + trb_dma = priv_req->aligned_buf->dma; + else + trb_dma = request->dma; + + /* For stream capable endpoints driver use only single TD. */ + trb = priv_ep->trb_pool + priv_ep->enqueue; + priv_req->start_trb = priv_ep->enqueue; + priv_req->end_trb = priv_req->start_trb; + priv_req->trb = trb; + + cdns3_select_ep(priv_ep->cdns3_dev, address); + + control = TRB_TYPE(TRB_NORMAL) | TRB_CYCLE | + TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP; + + if (!request->num_sgs) { + trb->buffer = TRB_BUFFER(trb_dma); + length = request->length; + } else { + trb->buffer = TRB_BUFFER(request->sg[sg_idx].dma_address); + length = request->sg[sg_idx].length; + } + + tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); + + trb->length = TRB_BURST_LEN(16 /*priv_ep->trb_burst_size*/) | + TRB_LEN(length); + + /* + * For DEV_VER_V2 controller version we have enabled + * USB_CONF2_EN_TDL_TRB in DMULT configuration. + * This enables TDL calculation based on TRB, hence setting TDL in TRB. + */ + if (priv_dev->dev_ver >= DEV_VER_V2) { + if (priv_dev->gadget.speed == USB_SPEED_SUPER) + trb->length |= TRB_TDL_SS_SIZE(tdl); + } + priv_req->flags |= REQUEST_PENDING; + + trb->control = control; + + trace_cdns3_prepare_trb(priv_ep, priv_req->trb); + + /* + * Memory barrier - Cycle Bit must be set before trb->length and + * trb->buffer fields. + */ + wmb(); + + /* always first element */ + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), + &priv_dev->regs->ep_traddr); + + if (!(priv_ep->flags & EP_STALLED)) { + trace_cdns3_ring(priv_ep); + /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/ + writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts); + + priv_ep->prime_flag = false; + + /* + * Controller version DEV_VER_V2 tdl calculation + * is based on TRB + */ + + if (priv_dev->dev_ver < DEV_VER_V2) + writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, + &priv_dev->regs->ep_cmd); + else if (priv_dev->dev_ver > DEV_VER_V2) + writel(tdl, &priv_dev->regs->ep_tdl); + + priv_ep->last_stream_id = priv_req->request.stream_id; + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + writel(EP_CMD_ERDY_SID(priv_req->request.stream_id) | + EP_CMD_ERDY, &priv_dev->regs->ep_cmd); + + trace_cdns3_doorbell_epx(priv_ep->name, + readl(&priv_dev->regs->ep_traddr)); + } + + /* WORKAROUND for transition to L0 */ + __cdns3_gadget_wakeup(priv_dev); + + return 0; +} + /** * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware * @priv_ep: endpoint object * * Returns zero on success or negative value on failure */ -int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, - struct usb_request *request) +static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; struct cdns3_request *priv_req; @@ -826,6 +1096,7 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, int address; u32 control; int pcs; + u16 total_tdl = 0; if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) num_trb = priv_ep->interval; @@ -910,6 +1181,9 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, if (likely(priv_dev->dev_ver >= DEV_VER_V2)) td_size = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); + else if (priv_ep->flags & EP_TDLCHK_EN) + total_tdl += DIV_ROUND_UP(length, + priv_ep->endpoint.maxpacket); trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) | TRB_LEN(length); @@ -954,6 +1228,23 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, if (sg_iter == 1) trb->control |= TRB_IOC | TRB_ISP; + if (priv_dev->dev_ver < DEV_VER_V2 && + (priv_ep->flags & EP_TDLCHK_EN)) { + u16 tdl = total_tdl; + u16 old_tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd)); + + if (tdl > EP_CMD_TDL_MAX) { + tdl = EP_CMD_TDL_MAX; + priv_ep->pending_tdl = total_tdl - EP_CMD_TDL_MAX; + } + + if (old_tdl < tdl) { + tdl -= old_tdl; + writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, + &priv_dev->regs->ep_cmd); + } + } + /* * Memory barrier - cycle bit must be set before other filds in trb. */ @@ -1153,29 +1444,56 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, cdns3_move_deq_to_next_trb(priv_req); } - /* Re-select endpoint. It could be changed by other CPU during - * handling usb_gadget_giveback_request. - */ - cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + if (!request->stream_id) { + /* Re-select endpoint. It could be changed by other CPU + * during handling usb_gadget_giveback_request. + */ + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); - if (!cdns3_request_handled(priv_ep, priv_req)) - goto prepare_next_td; + if (!cdns3_request_handled(priv_ep, priv_req)) + goto prepare_next_td; - trb = priv_ep->trb_pool + priv_ep->dequeue; - trace_cdns3_complete_trb(priv_ep, trb); + trb = priv_ep->trb_pool + priv_ep->dequeue; + trace_cdns3_complete_trb(priv_ep, trb); + + if (trb != priv_req->trb) + dev_warn(priv_dev->dev, + "request_trb=0x%p, queue_trb=0x%p\n", + priv_req->trb, trb); + + request->actual = TRB_LEN(le32_to_cpu(trb->length)); + cdns3_move_deq_to_next_trb(priv_req); + cdns3_gadget_giveback(priv_ep, priv_req, 0); + + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && + TRBS_PER_SEGMENT == 2) + break; + } else { + /* Re-select endpoint. It could be changed by other CPU + * during handling usb_gadget_giveback_request. + */ + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + + trb = priv_ep->trb_pool; + trace_cdns3_complete_trb(priv_ep, trb); - if (trb != priv_req->trb) - dev_warn(priv_dev->dev, - "request_trb=0x%p, queue_trb=0x%p\n", - priv_req->trb, trb); + if (trb != priv_req->trb) + dev_warn(priv_dev->dev, + "request_trb=0x%p, queue_trb=0x%p\n", + priv_req->trb, trb); - request->actual = TRB_LEN(le32_to_cpu(trb->length)); - cdns3_move_deq_to_next_trb(priv_req); - cdns3_gadget_giveback(priv_ep, priv_req, 0); + request->actual += TRB_LEN(le32_to_cpu(trb->length)); - if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && - TRBS_PER_SEGMENT == 2) + if (!request->num_sgs || + (request->num_sgs == (priv_ep->stream_sg_idx + 1))) { + priv_ep->stream_sg_idx = 0; + cdns3_gadget_giveback(priv_ep, priv_req, 0); + } else { + priv_ep->stream_sg_idx++; + cdns3_ep_run_stream_transfer(priv_ep, request); + } break; + } } priv_ep->flags &= ~EP_PENDING_REQUEST; @@ -1205,6 +1523,21 @@ void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm) } } +static void cdns3_reprogram_tdl(struct cdns3_endpoint *priv_ep) +{ + u16 tdl = priv_ep->pending_tdl; + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (tdl > EP_CMD_TDL_MAX) { + tdl = EP_CMD_TDL_MAX; + priv_ep->pending_tdl -= EP_CMD_TDL_MAX; + } else { + priv_ep->pending_tdl = 0; + } + + writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, &priv_dev->regs->ep_cmd); +} + /** * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint * @priv_ep: endpoint object @@ -1215,6 +1548,9 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; u32 ep_sts_reg; + struct usb_request *deferred_request; + struct usb_request *pending_request; + u32 tdl = 0; cdns3_select_ep(priv_dev, priv_ep->endpoint.address); @@ -1223,6 +1559,36 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) ep_sts_reg = readl(&priv_dev->regs->ep_sts); writel(ep_sts_reg, &priv_dev->regs->ep_sts); + if ((ep_sts_reg & EP_STS_PRIME) && priv_ep->use_streams) { + bool dbusy = !!(ep_sts_reg & EP_STS_DBUSY); + + tdl = cdns3_get_tdl(priv_dev); + + /* + * Continue the previous transfer: + * There is some racing between ERDY and PRIME. The device send + * ERDY and almost in the same time Host send PRIME. It cause + * that host ignore the ERDY packet and driver has to send it + * again. + */ + if (tdl && (dbusy | !EP_STS_BUFFEMPTY(ep_sts_reg) | + EP_STS_HOSTPP(ep_sts_reg))) { + writel(EP_CMD_ERDY | + EP_CMD_ERDY_SID(priv_ep->last_stream_id), + &priv_dev->regs->ep_cmd); + ep_sts_reg &= ~(EP_STS_MD_EXIT | EP_STS_IOC); + } else { + priv_ep->prime_flag = true; + + pending_request = cdns3_next_request(&priv_ep->pending_req_list); + deferred_request = cdns3_next_request(&priv_ep->deferred_req_list); + + if (deferred_request && !pending_request) { + cdns3_start_all_request(priv_dev, priv_ep); + } + } + } + if (ep_sts_reg & EP_STS_TRBERR) { if (priv_ep->flags & EP_STALL_PENDING && !(ep_sts_reg & EP_STS_DESCMIS && @@ -1259,7 +1625,8 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) } } - if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP) || + (ep_sts_reg & EP_STS_IOT)) { if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) { if (ep_sts_reg & EP_STS_ISP) priv_ep->flags |= EP_QUIRK_END_TRANSFER; @@ -1267,6 +1634,29 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) priv_ep->flags &= ~EP_QUIRK_END_TRANSFER; } + if (!priv_ep->use_streams) { + if ((ep_sts_reg & EP_STS_IOC) || + (ep_sts_reg & EP_STS_ISP)) { + cdns3_transfer_completed(priv_dev, priv_ep); + } else if ((priv_ep->flags & EP_TDLCHK_EN) & + priv_ep->pending_tdl) { + /* handle IOT with pending tdl */ + cdns3_reprogram_tdl(priv_ep); + } + } else if (priv_ep->dir == USB_DIR_OUT) { + priv_ep->ep_sts_pending |= ep_sts_reg; + } else if (ep_sts_reg & EP_STS_IOT) { + cdns3_transfer_completed(priv_dev, priv_ep); + } + } + + /* + * MD_EXIT interrupt sets when stream capable endpoint exits + * from MOVE DATA state of Bulk IN/OUT stream protocol state machine + */ + if (priv_ep->dir == USB_DIR_OUT && (ep_sts_reg & EP_STS_MD_EXIT) && + (priv_ep->ep_sts_pending & EP_STS_IOT) && priv_ep->use_streams) { + priv_ep->ep_sts_pending = 0; cdns3_transfer_completed(priv_dev, priv_ep); } @@ -1274,7 +1664,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) * WA2: this condition should only be meet when * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN. - * In other cases this interrupt will be disabled/ + * In other cases this interrupt will be disabled. */ if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 && !(priv_ep->flags & EP_STALLED)) @@ -1457,6 +1847,9 @@ static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data) ret = IRQ_HANDLED; } + if (priv_dev->dev_ver < DEV_VER_V2 && priv_dev->using_streams) + cdns3_wa2_check_outq_status(priv_dev); + irqend: writel(~0, &priv_dev->regs->ep_ien); spin_unlock_irqrestore(&priv_dev->lock, flags); @@ -1511,6 +1904,27 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev, return 0; } +void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER) + return; + + if (priv_dev->dev_ver >= DEV_VER_V3) { + u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0)); + + /* + * Stream capable endpoints are handled by using ep_tdl + * register. Other endpoints use TDL from TRB feature. + */ + cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb, mask); + } + + /* Enable Stream Bit TDL chk and SID chk */ + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_STREAM_EN | + EP_CFG_TDL_CHK | EP_CFG_SID_CHK); +} + void cdns3_configure_dmult(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep) { @@ -1772,6 +2186,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, { struct cdns3_endpoint *priv_ep; struct cdns3_device *priv_dev; + const struct usb_ss_ep_comp_descriptor *comp_desc; u32 reg = EP_STS_EN_TRBERREN; u32 bEndpointAddress; unsigned long flags; @@ -1781,6 +2196,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, priv_ep = ep_to_cdns3_ep(ep); priv_dev = priv_ep->cdns3_dev; + comp_desc = priv_ep->endpoint.comp_desc; if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { dev_dbg(priv_dev->dev, "usbss: invalid parameters\n"); @@ -1811,6 +2227,24 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, goto exit; } + bEndpointAddress = priv_ep->num | priv_ep->dir; + cdns3_select_ep(priv_dev, bEndpointAddress); + + if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { + /* + * Enable stream support (SS mode) related interrupts + * in EP_STS_EN Register + */ + if (priv_dev->gadget.speed >= USB_SPEED_SUPER) { + reg |= EP_STS_EN_IOTEN | EP_STS_EN_PRIMEEEN | + EP_STS_EN_SIDERREN | EP_STS_EN_MD_EXITEN | + EP_STS_EN_STREAMREN; + priv_ep->use_streams = true; + cdns3_stream_ep_reconfig(priv_dev, priv_ep); + priv_dev->using_streams |= true; + } + } + ret = cdns3_allocate_trb_pool(priv_ep); if (ret) @@ -1957,6 +2391,7 @@ static int cdns3_gadget_ep_disable(struct usb_ep *ep) ep->desc = NULL; priv_ep->flags &= ~EP_ENABLED; + priv_ep->use_streams = false; spin_unlock_irqrestore(&priv_dev->lock, flags); @@ -2005,13 +2440,21 @@ static int __cdns3_gadget_ep_queue(struct usb_ep *ep, list_add_tail(&request->list, &priv_ep->deferred_req_list); /* + * For stream capable endpoint if prime irq flag is set then only start + * request. * If hardware endpoint configuration has not been set yet then * just queue request in deferred list. Transfer will be started in * cdns3_set_hw_configuration. */ - if (priv_dev->hw_configured_flag && !(priv_ep->flags & EP_STALLED) && - !(priv_ep->flags & EP_STALL_PENDING)) - cdns3_start_all_request(priv_dev, priv_ep); + if (!request->stream_id) { + if (priv_dev->hw_configured_flag && + !(priv_ep->flags & EP_STALLED) && + !(priv_ep->flags & EP_STALL_PENDING)) + cdns3_start_all_request(priv_dev, priv_ep); + } else { + if (priv_dev->hw_configured_flag && priv_ep->prime_flag) + cdns3_start_all_request(priv_dev, priv_ep); + } return 0; } @@ -2384,7 +2827,6 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) struct cdns3_endpoint *priv_ep; u32 bEndpointAddress; struct usb_ep *ep; - int ret = 0; int val; priv_dev->gadget_driver = NULL; @@ -2408,7 +2850,7 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) writel(0, &priv_dev->regs->usb_ien); writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); - return ret; + return 0; } static const struct usb_gadget_ops cdns3_gadget_ops = { diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h index bc4024041ef2..f003a7801872 100644 --- a/drivers/usb/cdns3/gadget.h +++ b/drivers/usb/cdns3/gadget.h @@ -599,6 +599,7 @@ struct cdns3_usb_regs { #define EP_CMD_TDL_MASK GENMASK(15, 9) #define EP_CMD_TDL_SET(p) (((p) << 9) & EP_CMD_TDL_MASK) #define EP_CMD_TDL_GET(p) (((p) & EP_CMD_TDL_MASK) >> 9) +#define EP_CMD_TDL_MAX (EP_CMD_TDL_MASK >> 9) /* ERDY Stream ID value (used in SS mode). */ #define EP_CMD_ERDY_SID_MASK GENMASK(31, 16) @@ -969,10 +970,18 @@ struct cdns3_usb_regs { #define ISO_MAX_INTERVAL 10 +#define MAX_TRB_LENGTH BIT(16) + #if TRBS_PER_SEGMENT < 2 #error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2." #endif +#define TRBS_PER_STREAM_SEGMENT 2 + +#if TRBS_PER_STREAM_SEGMENT < 2 +#error "Incorrect TRBS_PER_STREAMS_SEGMENT. Minimal Transfer Ring size is 2." +#endif + /* *Only for ISOC endpoints - maximum number of TRBs is calculated as * pow(2, bInterval-1) * number of usb requests. It is limitation made by @@ -1000,6 +1009,7 @@ struct cdns3_trb { #define TRB_SIZE (sizeof(struct cdns3_trb)) #define TRB_RING_SIZE (TRB_SIZE * TRBS_PER_SEGMENT) +#define TRB_STREAM_RING_SIZE (TRB_SIZE * TRBS_PER_STREAM_SEGMENT) #define TRB_ISO_RING_SIZE (TRB_SIZE * TRBS_PER_ISOC_SEGMENT) #define TRB_CTRL_RING_SIZE (TRB_SIZE * 2) @@ -1078,7 +1088,7 @@ struct cdns3_trb { #define CDNS3_ENDPOINTS_MAX_COUNT 32 #define CDNS3_EP_ZLP_BUF_SIZE 1024 -#define CDNS3_EP_BUF_SIZE 2 /* KB */ +#define CDNS3_EP_BUF_SIZE 4 /* KB */ #define CDNS3_EP_ISO_HS_MULT 3 #define CDNS3_EP_ISO_SS_BURST 3 #define CDNS3_MAX_NUM_DESCMISS_BUF 32 @@ -1109,6 +1119,7 @@ struct cdns3_device; * @interval: interval between packets used for ISOC endpoint. * @free_trbs: number of free TRBs in transfer ring * @num_trbs: number of all TRBs in transfer ring + * @alloc_ring_size: size of the allocated TRB ring * @pcs: producer cycle state * @ccs: consumer cycle state * @enqueue: enqueue index in transfer ring @@ -1142,6 +1153,7 @@ struct cdns3_endpoint { #define EP_QUIRK_END_TRANSFER BIT(11) #define EP_QUIRK_EXTRA_BUF_DET BIT(12) #define EP_QUIRK_EXTRA_BUF_EN BIT(13) +#define EP_TDLCHK_EN BIT(15) u32 flags; struct cdns3_request *descmis_req; @@ -1153,6 +1165,7 @@ struct cdns3_endpoint { int free_trbs; int num_trbs; + int alloc_ring_size; u8 pcs; u8 ccs; int enqueue; @@ -1163,6 +1176,14 @@ struct cdns3_endpoint { struct cdns3_trb *wa1_trb; unsigned int wa1_trb_index; unsigned int wa1_cycle_bit:1; + + /* Stream related */ + unsigned int use_streams:1; + unsigned int prime_flag:1; + u32 ep_sts_pending; + u16 last_stream_id; + u16 pending_tdl; + unsigned int stream_sg_idx; }; /** @@ -1290,6 +1311,7 @@ struct cdns3_device { int hw_configured_flag:1; int wake_up_flag:1; unsigned status_completion_no_call:1; + unsigned using_streams:1; int out_mem_is_allocated; struct work_struct pending_status_wq; @@ -1310,8 +1332,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev); void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep); void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable); struct usb_request *cdns3_next_request(struct list_head *list); -int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, - struct usb_request *request); void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm); int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep); u8 cdns3_ep_addr_to_index(u8 ep_addr); diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index e92348c9b4d7..8d121e207fd8 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -122,18 +122,24 @@ DECLARE_EVENT_CLASS(cdns3_log_epx_irq, __string(ep_name, priv_ep->name) __field(u32, ep_sts) __field(u32, ep_traddr) + __field(u32, ep_last_sid) + __field(u32, use_streams) __dynamic_array(char, str, CDNS3_MSG_MAX) ), TP_fast_assign( __assign_str(ep_name, priv_ep->name); __entry->ep_sts = readl(&priv_dev->regs->ep_sts); __entry->ep_traddr = readl(&priv_dev->regs->ep_traddr); + __entry->ep_last_sid = priv_ep->last_stream_id; + __entry->use_streams = priv_ep->use_streams; ), - TP_printk("%s, ep_traddr: %08x", + TP_printk("%s, ep_traddr: %08x ep_last_sid: %08x use_streams: %d", cdns3_decode_epx_irq(__get_str(str), __get_str(ep_name), __entry->ep_sts), - __entry->ep_traddr) + __entry->ep_traddr, + __entry->ep_last_sid, + __entry->use_streams) ); DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq, @@ -210,6 +216,7 @@ DECLARE_EVENT_CLASS(cdns3_log_request, __field(int, end_trb) __field(struct cdns3_trb *, start_trb_addr) __field(int, flags) + __field(unsigned int, stream_id) ), TP_fast_assign( __assign_str(name, req->priv_ep->name); @@ -225,9 +232,10 @@ DECLARE_EVENT_CLASS(cdns3_log_request, __entry->end_trb = req->end_trb; __entry->start_trb_addr = req->trb; __entry->flags = req->flags; + __entry->stream_id = req->request.stream_id; ), TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d," - " trb: [start:%d, end:%d: virt addr %pa], flags:%x ", + " trb: [start:%d, end:%d: virt addr %pa], flags:%x SID: %u", __get_str(name), __entry->req, __entry->buf, __entry->actual, __entry->length, __entry->zero ? "Z" : "z", @@ -237,7 +245,8 @@ DECLARE_EVENT_CLASS(cdns3_log_request, __entry->start_trb, __entry->end_trb, __entry->start_trb_addr, - __entry->flags + __entry->flags, + __entry->stream_id ) ); @@ -281,6 +290,39 @@ TRACE_EVENT(cdns3_ep0_queue, __entry->length) ); +DECLARE_EVENT_CLASS(cdns3_stream_split_transfer_len, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req), + TP_STRUCT__entry( + __string(name, req->priv_ep->name) + __field(struct cdns3_request *, req) + __field(unsigned int, length) + __field(unsigned int, actual) + __field(unsigned int, stream_id) + ), + TP_fast_assign( + __assign_str(name, req->priv_ep->name); + __entry->req = req; + __entry->actual = req->request.length; + __entry->length = req->request.actual; + __entry->stream_id = req->request.stream_id; + ), + TP_printk("%s: req: %p,request length: %u actual length: %u SID: %u", + __get_str(name), __entry->req, __entry->length, + __entry->actual, __entry->stream_id) +); + +DEFINE_EVENT(cdns3_stream_split_transfer_len, cdns3_stream_transfer_split, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_stream_split_transfer_len, + cdns3_stream_transfer_split_next_part, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + DECLARE_EVENT_CLASS(cdns3_log_aligned_request, TP_PROTO(struct cdns3_request *priv_req), TP_ARGS(priv_req), @@ -319,6 +361,34 @@ DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request, TP_ARGS(req) ); +DECLARE_EVENT_CLASS(cdns3_log_map_request, + TP_PROTO(struct cdns3_request *priv_req), + TP_ARGS(priv_req), + TP_STRUCT__entry( + __string(name, priv_req->priv_ep->name) + __field(struct usb_request *, req) + __field(void *, buf) + __field(dma_addr_t, dma) + ), + TP_fast_assign( + __assign_str(name, priv_req->priv_ep->name); + __entry->req = &priv_req->request; + __entry->buf = priv_req->request.buf; + __entry->dma = priv_req->request.dma; + ), + TP_printk("%s: req: %p, req buf %p, dma %p", + __get_str(name), __entry->req, __entry->buf, &__entry->dma + ) +); +DEFINE_EVENT(cdns3_log_map_request, cdns3_map_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); +DEFINE_EVENT(cdns3_log_map_request, cdns3_mapped_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + DECLARE_EVENT_CLASS(cdns3_log_trb, TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), TP_ARGS(priv_ep, trb), @@ -329,6 +399,7 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, __field(u32, length) __field(u32, control) __field(u32, type) + __field(unsigned int, last_stream_id) ), TP_fast_assign( __assign_str(name, priv_ep->name); @@ -337,8 +408,9 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, __entry->length = trb->length; __entry->control = trb->control; __entry->type = usb_endpoint_type(priv_ep->endpoint.desc); + __entry->last_stream_id = priv_ep->last_stream_id; ), - TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s)", + TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s) SID:%lu LAST_SID:%u", __get_str(name), __entry->trb, __entry->buffer, TRB_LEN(__entry->length), (u8)TRB_BURST_LEN_GET(__entry->length), @@ -349,7 +421,9 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, __entry->control & TRB_FIFO_MODE ? "FIFO, " : "", __entry->control & TRB_CHAIN ? "CHAIN, " : "", __entry->control & TRB_IOC ? "IOC, " : "", - TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK" + TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK", + TRB_FIELD_TO_STREAMID(__entry->control), + __entry->last_stream_id ) ); @@ -398,6 +472,7 @@ DECLARE_EVENT_CLASS(cdns3_log_ep, __field(unsigned int, maxpacket) __field(unsigned int, maxpacket_limit) __field(unsigned int, max_streams) + __field(unsigned int, use_streams) __field(unsigned int, maxburst) __field(unsigned int, flags) __field(unsigned int, dir) @@ -409,16 +484,18 @@ DECLARE_EVENT_CLASS(cdns3_log_ep, __entry->maxpacket = priv_ep->endpoint.maxpacket; __entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit; __entry->max_streams = priv_ep->endpoint.max_streams; + __entry->use_streams = priv_ep->use_streams; __entry->maxburst = priv_ep->endpoint.maxburst; __entry->flags = priv_ep->flags; __entry->dir = priv_ep->dir; __entry->enqueue = priv_ep->enqueue; __entry->dequeue = priv_ep->dequeue; ), - TP_printk("%s: mps: %d/%d. streams: %d, burst: %d, enq idx: %d, " - "deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s", + TP_printk("%s: mps: %d/%d. streams: %d, stream enable: %d, burst: %d, " + "enq idx: %d, deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s", __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, __entry->max_streams, + __entry->use_streams, __entry->maxburst, __entry->enqueue, __entry->dequeue, __entry->flags & EP_ENABLED ? "EN | " : "", diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index ae850b3fddf2..d53db520e209 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -7,6 +7,7 @@ config USB_CHIPIDEA select RESET_CONTROLLER select USB_ULPI_BUS select USB_ROLE_SWITCH + select USB_TEGRA_PHY if ARCH_TEGRA help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 6911aef500e9..d49d5e1235d0 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -302,6 +302,16 @@ static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci) return USB_ROLE_NONE; } +static inline enum ci_role usb_role_to_ci_role(enum usb_role role) +{ + if (role == USB_ROLE_HOST) + return CI_ROLE_HOST; + else if (role == USB_ROLE_DEVICE) + return CI_ROLE_GADGET; + else + return CI_ROLE_END; +} + /** * hw_read_id_reg: reads from a identification register * @ci: the controller diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c index 0c9911d44ee5..7455df0ede49 100644 --- a/drivers/usb/chipidea/ci_hdrc_tegra.c +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c @@ -83,13 +83,6 @@ static int tegra_udc_probe(struct platform_device *pdev) return err; } - /* - * Tegra's USB PHY driver doesn't implement optional phy_init() - * hook, so we have to power on UDC controller before ChipIdea - * driver initialization kicks in. - */ - usb_phy_set_suspend(udc->phy, 0); - /* setup and register ChipIdea HDRC device */ udc->data.name = "tegra-udc"; udc->data.flags = soc->flags; @@ -109,7 +102,6 @@ static int tegra_udc_probe(struct platform_device *pdev) return 0; fail_power_off: - usb_phy_set_suspend(udc->phy, 1); clk_disable_unprepare(udc->clk); return err; } @@ -119,7 +111,6 @@ static int tegra_udc_remove(struct platform_device *pdev) struct tegra_udc *udc = platform_get_drvdata(pdev); ci_hdrc_remove_device(udc->dev); - usb_phy_set_suspend(udc->phy, 1); clk_disable_unprepare(udc->clk); return 0; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index dce5db41501c..52139c2a9924 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -618,9 +618,11 @@ static int ci_usb_role_switch_set(struct device *dev, enum usb_role role) struct ci_hdrc *ci = dev_get_drvdata(dev); struct ci_hdrc_cable *cable = NULL; enum usb_role current_role = ci_role_to_usb_role(ci); + enum ci_role ci_role = usb_role_to_ci_role(role); unsigned long flags; - if (current_role == role) + if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) || + (current_role == role)) return 0; pm_runtime_get_sync(ci->dev); diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h index 70112cf0f195..2625aa01a911 100644 --- a/drivers/usb/chipidea/host.h +++ b/drivers/usb/chipidea/host.h @@ -20,7 +20,7 @@ static inline void ci_hdrc_host_destroy(struct ci_hdrc *ci) } -static void ci_hdrc_host_driver_init(void) +static inline void ci_hdrc_host_driver_init(void) { } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 12bb5722b420..6833c918abce 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -574,7 +574,7 @@ __acquires(ps->lock) /* Now carefully unlink all the marked pending URBs */ rescan: - list_for_each_entry(as, &ps->async_pending, asynclist) { + list_for_each_entry_reverse(as, &ps->async_pending, asynclist) { if (as->bulk_status == AS_UNLINK) { as->bulk_status = 0; /* Only once */ urb = as->urb; @@ -636,7 +636,7 @@ static void destroy_async(struct usb_dev_state *ps, struct list_head *list) spin_lock_irqsave(&ps->lock, flags); while (!list_empty(list)) { - as = list_entry(list->next, struct async, asynclist); + as = list_last_entry(list, struct async, asynclist); list_del_init(&as->asynclist); urb = as->urb; usb_get_urb(urb); diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 6af6add3d4c0..876ff31261d5 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -288,14 +288,9 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) /* * Need to schedule a work, as there are possible DELAY function calls. - * Release lock before scheduling workq as it holds spinlock during - * scheduling. */ - if (hsotg->wq_otg) { - spin_unlock(&hsotg->lock); + if (hsotg->wq_otg) queue_work(hsotg->wq_otg, &hsotg->wf_otg); - spin_lock(&hsotg->lock); - } } /** diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c index b8f2790abf91..3a0dcbfbc827 100644 --- a/drivers/usb/dwc2/debugfs.c +++ b/drivers/usb/dwc2/debugfs.c @@ -183,6 +183,7 @@ DEFINE_SHOW_ATTRIBUTE(state); static int fifo_show(struct seq_file *seq, void *v) { struct dwc2_hsotg *hsotg = seq->private; + int fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); u32 val; int idx; @@ -196,7 +197,7 @@ static int fifo_show(struct seq_file *seq, void *v) seq_puts(seq, "\nPeriodic TXFIFOs:\n"); - for (idx = 1; idx < hsotg->num_of_eps; idx++) { + for (idx = 1; idx <= fifo_count; idx++) { val = dwc2_readl(hsotg, DPTXFSIZN(idx)); seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 6be10e496e10..88f7d6d4ff2d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3784,15 +3784,26 @@ irq_retry: for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ - if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) + if (BIT(idx) & ~daintmsk) continue; epctrl = dwc2_readl(hsotg, DOEPCTL(idx)); - if (epctrl & DXEPCTL_EPENA) { + //ISOC Ep's only + if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous) { epctrl |= DXEPCTL_SNAK; epctrl |= DXEPCTL_EPDIS; dwc2_writel(hsotg, epctrl, DOEPCTL(idx)); + continue; + } + + //Non-ISOC EP's + if (hs_ep->halted) { + if (!(epctrl & DXEPCTL_EPENA)) + epctrl |= DXEPCTL_EPENA; + epctrl |= DXEPCTL_EPDIS; + epctrl |= DXEPCTL_STALL; + dwc2_writel(hsotg, epctrl, DOEPCTL(idx)); } } @@ -4056,11 +4067,12 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) { + unsigned fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); u32 fifo_index = 0; u32 fifo_size = UINT_MAX; size = hs_ep->ep.maxpacket * hs_ep->mc; - for (i = 1; i < hsotg->num_of_eps; ++i) { + for (i = 1; i <= fifo_count; ++i) { if (hsotg->fifo_map & (1 << i)) continue; val = dwc2_readl(hsotg, DPTXFSIZN(i)); @@ -4310,19 +4322,20 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) epctl = dwc2_readl(hs, epreg); if (value) { - epctl |= DXEPCTL_STALL; + if (!(dwc2_readl(hs, GINTSTS) & GINTSTS_GOUTNAKEFF)) + dwc2_set_bit(hs, DCTL, DCTL_SGOUTNAK); + // STALL bit will be set in GOUTNAKEFF interrupt handler } else { epctl &= ~DXEPCTL_STALL; xfertype = epctl & DXEPCTL_EPTYPE_MASK; if (xfertype == DXEPCTL_EPTYPE_BULK || xfertype == DXEPCTL_EPTYPE_INTERRUPT) epctl |= DXEPCTL_SETD0PID; + dwc2_writel(hs, epctl, epreg); } - dwc2_writel(hs, epctl, epreg); } hs_ep->halted = value; - return 0; } diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 81afe553aa66..b90f858af960 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2824,7 +2824,7 @@ static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, list_move_tail(&chan->split_order_list_entry, &hsotg->split_order); - if (hsotg->params.host_dma) { + if (hsotg->params.host_dma && chan->qh) { if (hsotg->params.dma_desc_enable) { if (!chan->xfer_started || chan->ep_type == USB_ENDPOINT_XFER_ISOC) { diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f561c6c9e8a9..1d85c42b9c67 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1246,6 +1246,9 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) /* do nothing */ break; } + + /* de-assert DRVVBUS for HOST and OTG mode */ + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); } static void dwc3_get_properties(struct dwc3 *dwc) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1c8b349379af..77c4a9abe365 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -688,7 +688,9 @@ struct dwc3_ep { #define DWC3_EP_STALL BIT(1) #define DWC3_EP_WEDGE BIT(2) #define DWC3_EP_TRANSFER_STARTED BIT(3) +#define DWC3_EP_END_TRANSFER_PENDING BIT(4) #define DWC3_EP_PENDING_REQUEST BIT(5) +#define DWC3_EP_DELAY_START BIT(6) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index c1e9ea621f41..90bb022737da 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /** - * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer + * dwc3-exynos.c - Samsung Exynos DWC3 Specific Glue layer * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -255,4 +255,4 @@ module_platform_driver(dwc3_exynos_driver); MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>"); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer"); +MODULE_DESCRIPTION("DesignWare USB3 Exynos Glue Layer"); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 294276f7deb9..7051611229c9 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,7 @@ #define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e +#define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0 #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee @@ -342,6 +343,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPH), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPV), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index fd1b100d2927..6dee4dabc0a4 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -1136,8 +1136,10 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc, case DWC3_DEPEVT_EPCMDCMPLT: cmd = DEPEVT_PARAMETER_CMD(event->parameters); - if (cmd == DWC3_DEPCMD_ENDTRANSFER) + if (cmd == DWC3_DEPCMD_ENDTRANSFER) { + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + } break; } } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 154f3f3e8cff..1b8014ab0b25 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -57,7 +57,7 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) return -EINVAL; } - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); return 0; } @@ -111,6 +111,9 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + /* set no action before sending new link state change */ + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* set requested state */ reg |= DWC3_DCTL_ULSTCHNGREQ(state); dwc3_writel(dwc->regs, DWC3_DCTL, reg); @@ -1447,6 +1450,12 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) list_add_tail(&req->list, &dep->pending_list); req->status = DWC3_REQUEST_STATUS_QUEUED; + /* Start the transfer only after the END_TRANSFER is completed */ + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) { + dep->flags |= DWC3_EP_DELAY_START; + return 0; + } + /* * NOTICE: Isochronous endpoints should NEVER be prestarted. We must * wait for a XferNotReady event so we will know what's the current @@ -1828,7 +1837,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) dwc->pullups_connected = false; } - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); do { reg = dwc3_readl(dwc->regs, DWC3_DSTS); @@ -2625,8 +2634,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, cmd = DEPEVT_PARAMETER_CMD(event->parameters); if (cmd == DWC3_DEPCMD_ENDTRANSFER) { + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; dep->flags &= ~DWC3_EP_TRANSFER_STARTED; dwc3_gadget_ep_cleanup_cancelled_requests(dep); + if ((dep->flags & DWC3_EP_DELAY_START) && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) + __dwc3_gadget_kick_transfer(dep); + + dep->flags &= ~DWC3_EP_DELAY_START; } break; case DWC3_DEPEVT_STREAMEVT: @@ -2678,12 +2693,12 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt) { - struct dwc3 *dwc = dep->dwc; struct dwc3_gadget_ep_cmd_params params; u32 cmd; int ret; - if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) || + (dep->flags & DWC3_EP_END_TRANSFER_PENDING)) return; /* @@ -2693,16 +2708,13 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * much trouble synchronizing between us and gadget driver. * * We have discussed this with the IP Provider and it was - * suggested to giveback all requests here, but give HW some - * extra time to synchronize with the interconnect. We're using - * an arbitrary 100us delay for that. + * suggested to giveback all requests here. * * Note also that a similar handling was tested by Synopsys * (thanks a lot Paul) and nothing bad has come out of it. - * In short, what we're doing is: - * - * - Issue EndTransfer WITH CMDIOC bit set - * - Wait 100us + * In short, what we're doing is issuing EndTransfer with + * CMDIOC bit set and delay kicking transfer until the + * EndTransfer command had completed. * * As of IP version 3.10a of the DWC_usb3 IP, the controller * supports a mode to work around the above limitation. The @@ -2711,8 +2723,7 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * by writing GUCTL2[14]. This polling is already done in the * dwc3_send_gadget_ep_cmd() function so if the mode is * enabled, the EndTransfer command will have completed upon - * returning from this function and we don't need to delay for - * 100us. + * returning from this function. * * This mode is NOT available on the DWC_usb31 IP. */ @@ -2728,9 +2739,8 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, if (!interrupt) dep->flags &= ~DWC3_EP_TRANSFER_STARTED; - - if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) - udelay(100); + else + dep->flags |= DWC3_EP_END_TRANSFER_PENDING; } static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) @@ -2759,12 +2769,12 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) { int reg; + dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET); + reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_INITU1ENA; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); - reg &= ~DWC3_DCTL_INITU2ENA; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); dwc3_disconnect_gadget(dwc); @@ -2816,7 +2826,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); dwc->test_mode = false; dwc3_clear_stall_all_ep(dwc); @@ -2920,11 +2930,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A) reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold); - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); } else { reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_HIRD_THRES_MASK; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); } dep = dwc->eps[0]; @@ -3033,7 +3043,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, reg &= ~u1u2; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); break; default: /* do nothing */ diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 5faf4d1249e0..fbc7d8013f0b 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -127,4 +127,18 @@ static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id); } +/** + * dwc3_gadget_dctl_write_safe - write to DCTL safe from link state change + * @dwc: pointer to our context structure + * @value: value to write to DCTL + * + * Use this function when doing read-modify-write to DCTL. It will not + * send link state change request. + */ +static inline void dwc3_gadget_dctl_write_safe(struct dwc3 *dwc, u32 value) +{ + value &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, value); +} + #endif /* __DRIVERS_USB_DWC3_GADGET_H */ diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 02ff850278b1..c6db0a0a340c 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -483,34 +483,6 @@ config USB_CONFIGFS_F_TCM Both protocols can work on USB2.0 and USB3.0. UAS utilizes the USB 3.0 feature called streams support. -choice - tristate "USB Gadget precomposed configurations" - default USB_ETH - optional - help - A Linux "Gadget Driver" talks to the USB Peripheral Controller - driver through the abstract "gadget" API. Some other operating - systems call these "client" drivers, of which "class drivers" - are a subset (implementing a USB device class specification). - A gadget driver implements one or more USB functions using - the peripheral hardware. - - Gadget drivers are hardware-neutral, or "platform independent", - except that they sometimes must understand quirks or limitations - of the particular controllers they work with. For example, when - a controller doesn't support alternate configurations or provide - enough of the right types of endpoints, the gadget driver might - not be able work with that controller, or might need to implement - a less common variant of a device class protocol. - - The available choices each represent a single precomposed USB - gadget configuration. In the device model, each option contains - both the device instantiation as a child for a USB gadget - controller, and the relevant drivers for each function declared - by the device. - source "drivers/usb/gadget/legacy/Kconfig" -endchoice - endif # USB_GADGET diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index ab9ac48a751a..32b637e3e1fa 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -293,6 +293,47 @@ err: return ret; } +static ssize_t gadget_dev_desc_max_speed_show(struct config_item *item, + char *page) +{ + enum usb_device_speed speed = to_gadget_info(item)->composite.max_speed; + + return sprintf(page, "%s\n", usb_speed_string(speed)); +} + +static ssize_t gadget_dev_desc_max_speed_store(struct config_item *item, + const char *page, size_t len) +{ + struct gadget_info *gi = to_gadget_info(item); + + mutex_lock(&gi->lock); + + /* Prevent changing of max_speed after the driver is binded */ + if (gi->composite.gadget_driver.udc_name) + goto err; + + if (strncmp(page, "super-speed-plus", 16) == 0) + gi->composite.max_speed = USB_SPEED_SUPER_PLUS; + else if (strncmp(page, "super-speed", 11) == 0) + gi->composite.max_speed = USB_SPEED_SUPER; + else if (strncmp(page, "high-speed", 10) == 0) + gi->composite.max_speed = USB_SPEED_HIGH; + else if (strncmp(page, "full-speed", 10) == 0) + gi->composite.max_speed = USB_SPEED_FULL; + else if (strncmp(page, "low-speed", 9) == 0) + gi->composite.max_speed = USB_SPEED_LOW; + else + goto err; + + gi->composite.gadget_driver.max_speed = gi->composite.max_speed; + + mutex_unlock(&gi->lock); + return len; +err: + mutex_unlock(&gi->lock); + return -EINVAL; +} + CONFIGFS_ATTR(gadget_dev_desc_, bDeviceClass); CONFIGFS_ATTR(gadget_dev_desc_, bDeviceSubClass); CONFIGFS_ATTR(gadget_dev_desc_, bDeviceProtocol); @@ -302,6 +343,7 @@ CONFIGFS_ATTR(gadget_dev_desc_, idProduct); CONFIGFS_ATTR(gadget_dev_desc_, bcdDevice); CONFIGFS_ATTR(gadget_dev_desc_, bcdUSB); CONFIGFS_ATTR(gadget_dev_desc_, UDC); +CONFIGFS_ATTR(gadget_dev_desc_, max_speed); static struct configfs_attribute *gadget_root_attrs[] = { &gadget_dev_desc_attr_bDeviceClass, @@ -313,6 +355,7 @@ static struct configfs_attribute *gadget_root_attrs[] = { &gadget_dev_desc_attr_bcdDevice, &gadget_dev_desc_attr_bcdUSB, &gadget_dev_desc_attr_UDC, + &gadget_dev_desc_attr_max_speed, NULL, }; diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c index 460d5d7c984f..7f5cf488b2b1 100644 --- a/drivers/usb/gadget/function/f_ecm.c +++ b/drivers/usb/gadget/function/f_ecm.c @@ -52,6 +52,7 @@ struct f_ecm { struct usb_ep *notify; struct usb_request *notify_req; u8 notify_state; + atomic_t notify_count; bool is_open; /* FIXME is_open needs some irq-ish locking @@ -380,7 +381,7 @@ static void ecm_do_notify(struct f_ecm *ecm) int status; /* notification already in flight? */ - if (!req) + if (atomic_read(&ecm->notify_count)) return; event = req->buf; @@ -420,10 +421,10 @@ static void ecm_do_notify(struct f_ecm *ecm) event->bmRequestType = 0xA1; event->wIndex = cpu_to_le16(ecm->ctrl_id); - ecm->notify_req = NULL; + atomic_inc(&ecm->notify_count); status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC); if (status < 0) { - ecm->notify_req = req; + atomic_dec(&ecm->notify_count); DBG(cdev, "notify --> %d\n", status); } } @@ -448,17 +449,19 @@ static void ecm_notify_complete(struct usb_ep *ep, struct usb_request *req) switch (req->status) { case 0: /* no fault */ + atomic_dec(&ecm->notify_count); break; case -ECONNRESET: case -ESHUTDOWN: + atomic_set(&ecm->notify_count, 0); ecm->notify_state = ECM_NOTIFY_NONE; break; default: DBG(cdev, "event %02x --> %d\n", event->bNotificationType, req->status); + atomic_dec(&ecm->notify_count); break; } - ecm->notify_req = req; ecm_do_notify(ecm); } @@ -907,6 +910,11 @@ static void ecm_unbind(struct usb_configuration *c, struct usb_function *f) usb_free_all_descriptors(f); + if (atomic_read(&ecm->notify_count)) { + usb_ep_dequeue(ecm->notify, ecm->notify_req); + atomic_set(&ecm->notify_count, 0); + } + kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 0bbccac94d6c..6f8b67e61771 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1062,6 +1062,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) req->num_sgs = io_data->sgt.nents; } else { req->buf = data; + req->num_sgs = 0; } req->length = data_len; @@ -1105,6 +1106,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) req->num_sgs = io_data->sgt.nents; } else { req->buf = data; + req->num_sgs = 0; } req->length = data_len; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 2d6e76e4cffa..1d900081b1f0 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -53,6 +53,7 @@ struct f_ncm { struct usb_ep *notify; struct usb_request *notify_req; u8 notify_state; + atomic_t notify_count; bool is_open; const struct ndp_parser_opts *parser_opts; @@ -547,7 +548,7 @@ static void ncm_do_notify(struct f_ncm *ncm) int status; /* notification already in flight? */ - if (!req) + if (atomic_read(&ncm->notify_count)) return; event = req->buf; @@ -587,7 +588,8 @@ static void ncm_do_notify(struct f_ncm *ncm) event->bmRequestType = 0xA1; event->wIndex = cpu_to_le16(ncm->ctrl_id); - ncm->notify_req = NULL; + atomic_inc(&ncm->notify_count); + /* * In double buffering if there is a space in FIFO, * completion callback can be called right after the call, @@ -597,7 +599,7 @@ static void ncm_do_notify(struct f_ncm *ncm) status = usb_ep_queue(ncm->notify, req, GFP_ATOMIC); spin_lock(&ncm->lock); if (status < 0) { - ncm->notify_req = req; + atomic_dec(&ncm->notify_count); DBG(cdev, "notify --> %d\n", status); } } @@ -632,17 +634,19 @@ static void ncm_notify_complete(struct usb_ep *ep, struct usb_request *req) case 0: VDBG(cdev, "Notification %02x sent\n", event->bNotificationType); + atomic_dec(&ncm->notify_count); break; case -ECONNRESET: case -ESHUTDOWN: + atomic_set(&ncm->notify_count, 0); ncm->notify_state = NCM_NOTIFY_NONE; break; default: DBG(cdev, "event %02x --> %d\n", event->bNotificationType, req->status); + atomic_dec(&ncm->notify_count); break; } - ncm->notify_req = req; ncm_do_notify(ncm); spin_unlock(&ncm->lock); } @@ -1649,6 +1653,11 @@ static void ncm_unbind(struct usb_configuration *c, struct usb_function *f) ncm_string_defs[0].id = 0; usb_free_all_descriptors(f); + if (atomic_read(&ncm->notify_count)) { + usb_ep_dequeue(ncm->notify, ncm->notify_req); + atomic_set(&ncm->notify_count, 0); + } + kfree(ncm->notify_req->buf); usb_ep_free_request(ncm->notify, ncm->notify_req); } diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 7ec6a996af26..6d956f190f5a 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -239,18 +239,6 @@ static snd_pcm_uframes_t uac_pcm_pointer(struct snd_pcm_substream *substream) return bytes_to_frames(substream->runtime, prm->hw_ptr); } -static int uac_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) -{ - return snd_pcm_lib_malloc_pages(substream, - params_buffer_bytes(hw_params)); -} - -static int uac_pcm_hw_free(struct snd_pcm_substream *substream) -{ - return snd_pcm_lib_free_pages(substream); -} - static int uac_pcm_open(struct snd_pcm_substream *substream) { struct snd_uac_chip *uac = snd_pcm_substream_chip(substream); @@ -326,9 +314,6 @@ static int uac_pcm_null(struct snd_pcm_substream *substream) static const struct snd_pcm_ops uac_pcm_ops = { .open = uac_pcm_open, .close = uac_pcm_null, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = uac_pcm_hw_params, - .hw_free = uac_pcm_hw_free, .trigger = uac_pcm_trigger, .pointer = uac_pcm_pointer, .prepare = uac_pcm_null, @@ -422,7 +407,7 @@ int u_audio_start_playback(struct g_audio *audio_dev) struct usb_ep *ep; struct uac_rtd_params *prm; struct uac_params *params = &audio_dev->params; - unsigned int factor, rate; + unsigned int factor; const struct usb_endpoint_descriptor *ep_desc; int req_len, i; @@ -441,13 +426,15 @@ int u_audio_start_playback(struct g_audio *audio_dev) /* pre-compute some values for iso_complete() */ uac->p_framesize = params->p_ssize * num_channels(params->p_chmask); - rate = params->p_srate * uac->p_framesize; uac->p_interval = factor / (1 << (ep_desc->bInterval - 1)); - uac->p_pktsize = min_t(unsigned int, rate / uac->p_interval, + uac->p_pktsize = min_t(unsigned int, + uac->p_framesize * + (params->p_srate / uac->p_interval), prm->max_psize); if (uac->p_pktsize < prm->max_psize) - uac->p_pktsize_residue = rate % uac->p_interval; + uac->p_pktsize_residue = uac->p_framesize * + (params->p_srate % uac->p_interval); else uac->p_pktsize_residue = 0; @@ -584,8 +571,8 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name, strlcpy(card->shortname, card_name, sizeof(card->shortname)); sprintf(card->longname, "%s %i", card_name, card->dev->id); - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, - NULL, 0, BUFF_SIZE_MAX); + snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, + NULL, 0, BUFF_SIZE_MAX); err = snd_card_register(card); diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 119a4e47681f..6e7e1a9202e6 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -14,6 +14,32 @@ # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). # +choice + tristate "USB Gadget precomposed configurations" + default USB_ETH + optional + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + + The available choices each represent a single precomposed USB + gadget configuration. In the device model, each option contains + both the device instantiation as a child for a USB gadget + controller, and the relevant drivers for each function declared + by the device. + config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE @@ -489,3 +515,5 @@ config USB_G_WEBCAM Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_webcam". + +endchoice diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c index da1c37933ca1..8d7a556ece30 100644 --- a/drivers/usb/gadget/legacy/cdc2.c +++ b/drivers/usb/gadget/legacy/cdc2.c @@ -225,7 +225,7 @@ static struct usb_composite_driver cdc_driver = { .name = "g_cdc", .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = cdc_bind, .unbind = cdc_unbind, }; diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c index b640ed3fcf70..ae6d8f7092b8 100644 --- a/drivers/usb/gadget/legacy/g_ffs.c +++ b/drivers/usb/gadget/legacy/g_ffs.c @@ -149,7 +149,7 @@ static struct usb_composite_driver gfs_driver = { .name = DRIVER_NAME, .dev = &gfs_dev_desc, .strings = gfs_dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = gfs_bind, .unbind = gfs_unbind, }; diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c index 50515f9e1022..ec9749845660 100644 --- a/drivers/usb/gadget/legacy/multi.c +++ b/drivers/usb/gadget/legacy/multi.c @@ -482,7 +482,7 @@ static struct usb_composite_driver multi_driver = { .name = "g_multi", .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = multi_bind, .unbind = multi_unbind, .needs_serial = 1, diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c index 8465f081e921..c61e71ba7045 100644 --- a/drivers/usb/gadget/legacy/ncm.c +++ b/drivers/usb/gadget/legacy/ncm.c @@ -197,7 +197,7 @@ static struct usb_composite_driver ncm_driver = { .name = "g_ncm", .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = gncm_bind, .unbind = gncm_unbind, }; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 8a42768e3213..6e0432141c40 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1122,7 +1122,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = { .bInterval = 1, }; -static struct usb_gadget usba_gadget_template = { +static const struct usb_gadget usba_gadget_template = { .ops = &usba_udc_ops, .max_speed = USB_SPEED_HIGH, .name = "atmel_usba_udc", diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 51fa614b4079..9b11046480fe 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1414,6 +1414,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) } mutex_unlock(&udc_lock); + if (ret) + pr_warn("udc-core: couldn't find an available UDC or it's busy\n"); return ret; found: ret = udc_bind_to_driver(udc, driver); diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 64d80c65bb96..aaf975c809bf 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -2175,8 +2175,6 @@ static int gr_probe(struct platform_device *pdev) return -ENOMEM; } - spin_lock(&dev->lock); - /* Inside lock so that no gadget can use this udc until probe is done */ retval = usb_add_gadget_udc(dev->dev, &dev->gadget); if (retval) { @@ -2185,15 +2183,21 @@ static int gr_probe(struct platform_device *pdev) } dev->added = 1; + spin_lock(&dev->lock); + retval = gr_udc_init(dev); - if (retval) + if (retval) { + spin_unlock(&dev->lock); goto out; - - gr_dfs_create(dev); + } /* Clear all interrupt enables that might be left on since last boot */ gr_disable_interrupts_and_pullup(dev); + spin_unlock(&dev->lock); + + gr_dfs_create(dev); + retval = gr_request_irq(dev, dev->irq); if (retval) { dev_err(dev->dev, "Failed to request irq %d\n", dev->irq); @@ -2222,8 +2226,6 @@ static int gr_probe(struct platform_device *pdev) dev_info(dev->dev, "regs: %p, irq %d\n", dev->regs, dev->irq); out: - spin_unlock(&dev->lock); - if (retval) gr_remove(pdev); diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index f36f0730afab..bd12417996db 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2757,7 +2757,7 @@ static int omap_udc_probe(struct platform_device *pdev) /* NOTE: "knows" the order of the resources! */ if (!request_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1, + resource_size(&pdev->resource[0]), driver_name)) { DBG("request_mem_region failed\n"); return -EBUSY; @@ -2934,7 +2934,7 @@ cleanup0: } release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); + resource_size(&pdev->resource[0])); return status; } @@ -2950,7 +2950,7 @@ static int omap_udc_remove(struct platform_device *pdev) wait_for_completion(&done); release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); + resource_size(&pdev->resource[0])); return 0; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 8d730180db06..55bdfdf11e4c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -186,7 +186,7 @@ config USB_EHCI_FSL config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. @@ -210,8 +210,8 @@ config USB_EHCI_HCD_OMAP config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" - depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU) - default y + depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST) + default y if (PLAT_ORION || ARCH_MVEBU) ---help--- Enables support for the on-chip EHCI controller on Marvell's embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, @@ -221,15 +221,15 @@ config USB_EHCI_HCD_ORION config USB_EHCI_HCD_SPEAR tristate "Support for ST SPEAr on-chip EHCI USB controller" - depends on USB_EHCI_HCD && PLAT_SPEAR - default y + depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) + default y if PLAT_SPEAR ---help--- Enables support for the on-chip EHCI controller on ST SPEAr chips. config USB_EHCI_HCD_STI tristate "Support for ST STiHxxx on-chip EHCI USB controller" - depends on ARCH_STI && OF + depends on (ARCH_STI || COMPILE_TEST) && OF select GENERIC_PHY select USB_EHCI_HCD_PLATFORM help @@ -238,8 +238,8 @@ config USB_EHCI_HCD_STI config USB_EHCI_HCD_AT91 tristate "Support for Atmel on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_AT91 - default y + depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST) + default y if ARCH_AT91 ---help--- Enables support for the on-chip EHCI controller on Atmel chips. @@ -263,20 +263,20 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on SUPERH + depends on SUPERH || COMPILE_TEST ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_EXYNOS - tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS + tristate "EHCI support for Samsung S5P/Exynos SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help Enable support for the Samsung Exynos SOC's on-chip EHCI controller. config USB_EHCI_MV tristate "EHCI support for Marvell PXA/MMP USB controller" - depends on (ARCH_PXA || ARCH_MMP) + depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip @@ -289,7 +289,7 @@ config USB_EHCI_MV config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX + depends on ARCH_CNS3XXX || COMPILE_TEST select USB_EHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -410,15 +410,15 @@ config USB_OHCI_HCD_OMAP1 config USB_OHCI_HCD_SPEAR tristate "Support for ST SPEAr on-chip OHCI USB controller" - depends on USB_OHCI_HCD && PLAT_SPEAR - default y + depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) + default y if PLAT_SPEAR ---help--- Enables support for the on-chip OHCI controller on ST SPEAr chips. config USB_OHCI_HCD_STI tristate "Support for ST STiHxxx on-chip OHCI USB controller" - depends on ARCH_STI && OF + depends on (ARCH_STI || COMPILE_TEST) && OF select GENERIC_PHY select USB_OHCI_HCD_PLATFORM help @@ -427,8 +427,8 @@ config USB_OHCI_HCD_STI config USB_OHCI_HCD_S3C2410 tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) - default y + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) + default y if (ARCH_S3C24XX || ARCH_S3C64XX) ---help--- Enables support for the on-chip OHCI controller on S3C24xx/S3C64xx chips. @@ -453,17 +453,17 @@ config USB_OHCI_HCD_PXA27X config USB_OHCI_HCD_AT91 tristate "Support for Atmel on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_AT91 && OF - default y + depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF + default y if ARCH_AT91 ---help--- Enables support for the on-chip OHCI controller on Atmel chips. config USB_OHCI_HCD_OMAP3 tristate "OHCI support for OMAP3 and later chips" - depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5) + depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST select USB_OHCI_HCD_PLATFORM - default y + default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 help This option is deprecated now and the driver was removed, use USB_OHCI_HCD_PLATFORM instead. @@ -473,10 +473,10 @@ config USB_OHCI_HCD_OMAP3 config USB_OHCI_HCD_DAVINCI tristate "OHCI support for TI DaVinci DA8xx" - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST depends on USB_OHCI_HCD select PHY_DA8XX_USB - default y + default y if ARCH_DAVINCI_DA8XX help Enables support for the DaVinci DA8xx integrated OHCI controller. This driver cannot currently be a loadable @@ -532,7 +532,7 @@ config USB_OHCI_HCD_SSB config USB_OHCI_SH bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on SUPERH + depends on SUPERH || COMPILE_TEST select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -542,14 +542,14 @@ config USB_OHCI_SH If you use the PCI OHCI controller, this option is not necessary. config USB_OHCI_EXYNOS - tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS + tristate "OHCI support for Samsung S5P/Exynos SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX + depends on ARCH_CNS3XXX || COMPILE_TEST select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 01debfd03d4a..a4e9abcbdc4f 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * SAMSUNG EXYNOS USB HOST EHCI Controller + * Samsung Exynos USB HOST EHCI Controller * * Copyright (C) 2011 Samsung Electronics Co.Ltd * Author: Jingoo Han <jg1.han@samsung.com> @@ -21,7 +21,7 @@ #include "ehci.h" -#define DRIVER_DESC "EHCI EXYNOS driver" +#define DRIVER_DESC "EHCI Exynos driver" #define EHCI_INSNREG00(base) (base + 0x90) #define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index 66ec1fdf9fe7..bd4f6ef534d9 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/usb/otg.h> +#include <linux/usb/of.h> #include <linux/platform_data/mv_usb.h> #include <linux/io.h> @@ -67,6 +68,8 @@ static int mv_ehci_reset(struct usb_hcd *hcd) { struct device *dev = hcd->self.controller; struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 status; int retval; if (ehci_mv == NULL) { @@ -80,6 +83,14 @@ static int mv_ehci_reset(struct usb_hcd *hcd) if (retval) dev_err(dev, "ehci_setup failed %d\n", retval); + if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) { + status = ehci_readl(ehci, &ehci->regs->port_status[0]); + status |= PORT_TEST_FORCE; + ehci_writel(ehci, status, &ehci->regs->port_status[0]); + status &= ~PORT_TEST_FORCE; + ehci_writel(ehci, status, &ehci->regs->port_status[0]); + } + return retval; } @@ -116,7 +127,7 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->set_vbus = pdata->set_vbus; } - ehci_mv->phy = devm_phy_get(&pdev->dev, "usb"); + ehci_mv->phy = devm_phy_optional_get(&pdev->dev, "usb"); if (IS_ERR(ehci_mv->phy)) { retval = PTR_ERR(ehci_mv->phy); if (retval != -EPROBE_DEFER) @@ -164,7 +175,7 @@ static int mv_ehci_probe(struct platform_device *pdev) } ehci = hcd_to_ehci(hcd); - ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs; + ehci->caps = (struct ehci_caps __iomem *) ehci_mv->cap_regs; if (ehci_mv->mode == MV_USB_MODE_OTG) { ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); @@ -246,10 +257,8 @@ static int mv_ehci_remove(struct platform_device *pdev) MODULE_ALIAS("mv-ehci"); static const struct platform_device_id ehci_id_table[] = { - {"pxa-u2oehci", PXA_U2OEHCI}, - {"pxa-sph", PXA_SPH}, - {"mmp3-hsic", MMP3_HSIC}, - {"mmp3-fsic", MMP3_FSIC}, + {"pxa-u2oehci", 0}, + {"pxa-sph", 0}, {}, }; diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 2afde14dc425..c25c51d26f26 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -8,7 +8,6 @@ */ #include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/platform_data/ehci-sh.h> struct ehci_sh_priv { struct clk *iclk, *fclk; @@ -76,7 +75,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) { struct resource *res; struct ehci_sh_priv *priv; - struct ehci_sh_platdata *pdata; struct usb_hcd *hcd; int irq, ret; @@ -89,8 +87,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } - pdata = dev_get_platdata(&pdev->dev); - /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -127,9 +123,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) clk_enable(priv->fclk); clk_enable(priv->iclk); - if (pdata && pdata->phy_init) - pdata->phy_init(); - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd"); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 4d2cdec4cb78..d6433f206c17 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -42,12 +42,10 @@ struct tegra_ehci_soc_config { }; struct tegra_ehci_hcd { - struct tegra_usb_phy *phy; struct clk *clk; struct reset_control *rst; int port_resuming; bool needs_double_reset; - enum tegra_usb_phy_port_speed port_speed; }; static int tegra_reset_usb_controller(struct platform_device *pdev) @@ -480,12 +478,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } u_phy->otg->host = hcd_to_bus(hcd); - err = usb_phy_set_suspend(hcd->usb_phy, 0); - if (err) { - dev_err(&pdev->dev, "Failed to power on the phy\n"); - goto cleanup_phy; - } - irq = platform_get_irq(pdev, 0); if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); @@ -521,16 +513,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; + usb_remove_hcd(hcd); otg_set_host(hcd->usb_phy->otg, NULL); - usb_phy_shutdown(hcd->usb_phy); - usb_remove_hcd(hcd); - - reset_control_assert(tegra->rst); - udelay(1); - clk_disable_unprepare(tegra->clk); - usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index d5ce98e205c7..bd40e597f256 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -19,7 +19,7 @@ #include "ohci.h" -#define DRIVER_DESC "OHCI EXYNOS driver" +#define DRIVER_DESC "OHCI Exynos driver" static const char hcd_name[] = "ohci-exynos"; static struct hc_driver __read_mostly exynos_ohci_hc_driver; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index fe09b8626329..120666a0d590 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2783,11 +2783,15 @@ static void ehci_port_power(struct oxu_hcd *oxu, int is_on) return; oxu_dbg(oxu, "...power%s ports...\n", is_on ? "up" : "down"); - for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) - (void) oxu_hub_control(oxu_to_hcd(oxu), - is_on ? SetPortFeature : ClearPortFeature, - USB_PORT_FEAT_POWER, - port--, NULL, 0); + for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) { + if (is_on) + oxu_hub_control(oxu_to_hcd(oxu), SetPortFeature, + USB_PORT_FEAT_POWER, port--, NULL, 0); + else + oxu_hub_control(oxu_to_hcd(oxu), ClearPortFeature, + USB_PORT_FEAT_POWER, port--, NULL, 0); + } + msleep(20); } diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index b18a6baef204..bfbdb3ceed29 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -488,11 +488,6 @@ static int xhci_mtk_probe(struct platform_device *pdev) goto disable_clk; } - /* Initialize dma_mask and coherent_dma_mask to 32-bits */ - ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); - if (ret) - goto disable_clk; - hcd = usb_create_hcd(driver, dev, dev_name(dev)); if (!hcd) { ret = -ENOMEM; diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index bf9065438320..8163aefc6c6b 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -11,6 +11,7 @@ #include <linux/dma-mapping.h> #include <linux/firmware.h> #include <linux/interrupt.h> +#include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> @@ -38,7 +39,15 @@ #define XUSB_CFG_4 0x010 #define XUSB_BASE_ADDR_SHIFT 15 #define XUSB_BASE_ADDR_MASK 0x1ffff +#define XUSB_CFG_16 0x040 +#define XUSB_CFG_24 0x060 +#define XUSB_CFG_AXI_CFG 0x0f8 #define XUSB_CFG_ARU_C11_CSBRANGE 0x41c +#define XUSB_CFG_ARU_CONTEXT 0x43c +#define XUSB_CFG_ARU_CONTEXT_HS_PLS 0x478 +#define XUSB_CFG_ARU_CONTEXT_FS_PLS 0x47c +#define XUSB_CFG_ARU_CONTEXT_HSFS_SPEED 0x480 +#define XUSB_CFG_ARU_CONTEXT_HSFS_PP 0x484 #define XUSB_CFG_CSB_BASE_ADDR 0x800 /* FPCI mailbox registers */ @@ -62,11 +71,20 @@ #define MBOX_SMI_INTR_EN BIT(3) /* IPFS registers */ +#define IPFS_XUSB_HOST_MSI_BAR_SZ_0 0x0c0 +#define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0 0x0c4 +#define IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0 0x0c8 +#define IPFS_XUSB_HOST_MSI_VEC0_0 0x100 +#define IPFS_XUSB_HOST_MSI_EN_VEC0_0 0x140 #define IPFS_XUSB_HOST_CONFIGURATION_0 0x180 #define IPFS_EN_FPCI BIT(0) +#define IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0 0x184 #define IPFS_XUSB_HOST_INTR_MASK_0 0x188 #define IPFS_IP_INT_MASK BIT(16) +#define IPFS_XUSB_HOST_INTR_ENABLE_0 0x198 +#define IPFS_XUSB_HOST_UFPCI_CONFIG_0 0x19c #define IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0 0x1bc +#define IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0 0x1dc #define CSB_PAGE_SELECT_MASK 0x7fffff #define CSB_PAGE_SELECT_SHIFT 9 @@ -101,6 +119,8 @@ #define L2IMEMOP_ACTION_SHIFT 24 #define L2IMEMOP_INVALIDATE_ALL (0x40 << L2IMEMOP_ACTION_SHIFT) #define L2IMEMOP_LOAD_LOCKED_RESULT (0x11 << L2IMEMOP_ACTION_SHIFT) +#define XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT 0x101a18 +#define L2IMEMOP_RESULT_VLD BIT(31) #define XUSB_CSB_MP_APMAP 0x10181c #define APMAP_BOOTPATH BIT(31) @@ -145,19 +165,32 @@ struct tegra_xusb_phy_type { unsigned int num; }; -struct tega_xusb_mbox_regs { +struct tegra_xusb_mbox_regs { u16 cmd; u16 data_in; u16 data_out; u16 owner; }; +struct tegra_xusb_context_soc { + struct { + const unsigned int *offsets; + unsigned int num_offsets; + } ipfs; + + struct { + const unsigned int *offsets; + unsigned int num_offsets; + } fpci; +}; + struct tegra_xusb_soc { const char *firmware; const char * const *supply_names; unsigned int num_supplies; const struct tegra_xusb_phy_type *phy_types; unsigned int num_types; + const struct tegra_xusb_context_soc *context; struct { struct { @@ -166,12 +199,17 @@ struct tegra_xusb_soc { } usb2, ulpi, hsic, usb3; } ports; - struct tega_xusb_mbox_regs mbox; + struct tegra_xusb_mbox_regs mbox; bool scale_ss_clock; bool has_ipfs; }; +struct tegra_xusb_context { + u32 *ipfs; + u32 *fpci; +}; + struct tegra_xusb { struct device *dev; void __iomem *regs; @@ -218,6 +256,8 @@ struct tegra_xusb { void *virt; dma_addr_t phys; } fw; + + struct tegra_xusb_context context; }; static struct hc_driver __read_mostly tegra_xhci_hc_driver; @@ -623,9 +663,9 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data) return IRQ_HANDLED; } -static void tegra_xusb_config(struct tegra_xusb *tegra, - struct resource *regs) +static void tegra_xusb_config(struct tegra_xusb *tegra) { + u32 regs = tegra->hcd->rsrc_start; u32 value; if (tegra->soc->has_ipfs) { @@ -639,7 +679,7 @@ static void tegra_xusb_config(struct tegra_xusb *tegra, /* Program BAR0 space */ value = fpci_readl(tegra, XUSB_CFG_4); value &= ~(XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT); - value |= regs->start & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT); + value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT); fpci_writel(tegra, value, XUSB_CFG_4); usleep_range(100, 200); @@ -793,17 +833,34 @@ disable_clk: return err; } -static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) +#ifdef CONFIG_PM_SLEEP +static int tegra_xusb_init_context(struct tegra_xusb *tegra) +{ + const struct tegra_xusb_context_soc *soc = tegra->soc->context; + + tegra->context.ipfs = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets, + sizeof(u32), GFP_KERNEL); + if (!tegra->context.ipfs) + return -ENOMEM; + + tegra->context.fpci = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets, + sizeof(u32), GFP_KERNEL); + if (!tegra->context.fpci) + return -ENOMEM; + + return 0; +} +#else +static inline int tegra_xusb_init_context(struct tegra_xusb *tegra) +{ + return 0; +} +#endif + +static int tegra_xusb_request_firmware(struct tegra_xusb *tegra) { - unsigned int code_tag_blocks, code_size_blocks, code_blocks; struct tegra_xusb_fw_header *header; - struct device *dev = tegra->dev; const struct firmware *fw; - unsigned long timeout; - time64_t timestamp; - struct tm time; - u64 address; - u32 value; int err; err = request_firmware(&fw, tegra->soc->firmware, tegra->dev); @@ -828,6 +885,26 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) memcpy(tegra->fw.virt, fw->data, tegra->fw.size); release_firmware(fw); + return 0; +} + +static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) +{ + unsigned int code_tag_blocks, code_size_blocks, code_blocks; + struct xhci_cap_regs __iomem *cap = tegra->regs; + struct tegra_xusb_fw_header *header; + struct device *dev = tegra->dev; + struct xhci_op_regs __iomem *op; + unsigned long timeout; + time64_t timestamp; + struct tm time; + u64 address; + u32 value; + int err; + + header = (struct tegra_xusb_fw_header *)tegra->fw.virt; + op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase)); + if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) { dev_info(dev, "Firmware already loaded, Falcon state %#x\n", csb_readl(tegra, XUSB_FALC_CPUCTL)); @@ -882,26 +959,37 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) csb_writel(tegra, 0, XUSB_FALC_DMACTL); - msleep(50); + /* wait for RESULT_VLD to get set */ +#define tegra_csb_readl(offset) csb_readl(tegra, offset) + err = readx_poll_timeout(tegra_csb_readl, + XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT, value, + value & L2IMEMOP_RESULT_VLD, 100, 10000); + if (err < 0) { + dev_err(dev, "DMA controller not ready %#010x\n", value); + return err; + } +#undef tegra_csb_readl csb_writel(tegra, le32_to_cpu(header->boot_codetag), XUSB_FALC_BOOTVEC); - /* Boot Falcon CPU and wait for it to enter the STOPPED (idle) state. */ - timeout = jiffies + msecs_to_jiffies(5); - + /* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */ csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL); - while (time_before(jiffies, timeout)) { - if (csb_readl(tegra, XUSB_FALC_CPUCTL) == CPUCTL_STATE_STOPPED) + timeout = jiffies + msecs_to_jiffies(200); + + do { + value = readl(&op->status); + if ((value & STS_CNR) == 0) break; - usleep_range(100, 200); - } + usleep_range(1000, 2000); + } while (time_is_after_jiffies(timeout)); - if (csb_readl(tegra, XUSB_FALC_CPUCTL) != CPUCTL_STATE_STOPPED) { - dev_err(dev, "Falcon failed to start, state: %#x\n", - csb_readl(tegra, XUSB_FALC_CPUCTL)); + value = readl(&op->status); + if (value & STS_CNR) { + value = csb_readl(tegra, XUSB_FALC_CPUCTL); + dev_err(dev, "XHCI controller not read: %#010x\n", value); return -EIO; } @@ -966,11 +1054,37 @@ static int tegra_xusb_powerdomain_init(struct device *dev, return 0; } -static int tegra_xusb_probe(struct platform_device *pdev) +static int __tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra) { struct tegra_xusb_mbox_msg msg; - struct resource *regs; + int err; + + /* Enable firmware messages from controller. */ + msg.cmd = MBOX_CMD_MSG_ENABLED; + msg.data = 0; + + err = tegra_xusb_mbox_send(tegra, &msg); + if (err < 0) + dev_err(tegra->dev, "failed to enable messages: %d\n", err); + + return err; +} + +static int tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra) +{ + int err; + + mutex_lock(&tegra->lock); + err = __tegra_xusb_enable_firmware_messages(tegra); + mutex_unlock(&tegra->lock); + + return err; +} + +static int tegra_xusb_probe(struct platform_device *pdev) +{ struct tegra_xusb *tegra; + struct resource *regs; struct xhci_hcd *xhci; unsigned int i, j, k; struct phy *phy; @@ -986,6 +1100,10 @@ static int tegra_xusb_probe(struct platform_device *pdev) mutex_init(&tegra->lock); tegra->dev = &pdev->dev; + err = tegra_xusb_init_context(tegra); + if (err < 0) + return err; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); tegra->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(tegra->regs)) @@ -1173,6 +1291,10 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_powerdomains; } + tegra->hcd->regs = tegra->regs; + tegra->hcd->rsrc_start = regs->start; + tegra->hcd->rsrc_len = resource_size(regs); + /* * This must happen after usb_create_hcd(), because usb_create_hcd() * will overwrite the drvdata of the device with the hcd it creates. @@ -1185,19 +1307,6 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_hcd; } - pm_runtime_enable(&pdev->dev); - if (pm_runtime_enabled(&pdev->dev)) - err = pm_runtime_get_sync(&pdev->dev); - else - err = tegra_xusb_runtime_resume(&pdev->dev); - - if (err < 0) { - dev_err(&pdev->dev, "failed to enable device: %d\n", err); - goto disable_phy; - } - - tegra_xusb_config(tegra, regs); - /* * The XUSB Falcon microcontroller can only address 40 bits, so set * the DMA mask accordingly. @@ -1205,19 +1314,35 @@ static int tegra_xusb_probe(struct platform_device *pdev) err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); if (err < 0) { dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); - goto put_rpm; + goto disable_phy; + } + + err = tegra_xusb_request_firmware(tegra); + if (err < 0) { + dev_err(&pdev->dev, "failed to request firmware: %d\n", err); + goto disable_phy; + } + + pm_runtime_enable(&pdev->dev); + + if (!pm_runtime_enabled(&pdev->dev)) + err = tegra_xusb_runtime_resume(&pdev->dev); + else + err = pm_runtime_get_sync(&pdev->dev); + + if (err < 0) { + dev_err(&pdev->dev, "failed to enable device: %d\n", err); + goto free_firmware; } + tegra_xusb_config(tegra); + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); goto put_rpm; } - tegra->hcd->regs = tegra->regs; - tegra->hcd->rsrc_start = regs->start; - tegra->hcd->rsrc_len = resource_size(regs); - err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED); if (err < 0) { dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err); @@ -1244,21 +1369,12 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_usb3; } - mutex_lock(&tegra->lock); - - /* Enable firmware messages from controller. */ - msg.cmd = MBOX_CMD_MSG_ENABLED; - msg.data = 0; - - err = tegra_xusb_mbox_send(tegra, &msg); + err = tegra_xusb_enable_firmware_messages(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to enable messages: %d\n", err); - mutex_unlock(&tegra->lock); goto remove_usb3; } - mutex_unlock(&tegra->lock); - err = devm_request_threaded_irq(&pdev->dev, tegra->mbox_irq, tegra_xusb_mbox_irq, tegra_xusb_mbox_thread, 0, @@ -1281,6 +1397,9 @@ put_rpm: tegra_xusb_runtime_suspend(&pdev->dev); put_hcd: usb_put_hcd(tegra->hcd); +free_firmware: + dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt, + tegra->fw.phys); disable_phy: tegra_xusb_phy_disable(tegra); pm_runtime_disable(&pdev->dev); @@ -1328,22 +1447,176 @@ static int tegra_xusb_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP +static bool xhci_hub_ports_suspended(struct xhci_hub *hub) +{ + struct device *dev = hub->hcd->self.controller; + bool status = true; + unsigned int i; + u32 value; + + for (i = 0; i < hub->num_ports; i++) { + value = readl(hub->ports[i]->addr); + if ((value & PORT_PE) == 0) + continue; + + if ((value & PORT_PLS_MASK) != XDEV_U3) { + dev_info(dev, "%u-%u isn't suspended: %#010x\n", + hub->hcd->self.busnum, i + 1, value); + status = false; + } + } + + return status; +} + +static int tegra_xusb_check_ports(struct tegra_xusb *tegra) +{ + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + unsigned long flags; + int err = 0; + + spin_lock_irqsave(&xhci->lock, flags); + + if (!xhci_hub_ports_suspended(&xhci->usb2_rhub) || + !xhci_hub_ports_suspended(&xhci->usb3_rhub)) + err = -EBUSY; + + spin_unlock_irqrestore(&xhci->lock, flags); + + return err; +} + +static void tegra_xusb_save_context(struct tegra_xusb *tegra) +{ + const struct tegra_xusb_context_soc *soc = tegra->soc->context; + struct tegra_xusb_context *ctx = &tegra->context; + unsigned int i; + + if (soc->ipfs.num_offsets > 0) { + for (i = 0; i < soc->ipfs.num_offsets; i++) + ctx->ipfs[i] = ipfs_readl(tegra, soc->ipfs.offsets[i]); + } + + if (soc->fpci.num_offsets > 0) { + for (i = 0; i < soc->fpci.num_offsets; i++) + ctx->fpci[i] = fpci_readl(tegra, soc->fpci.offsets[i]); + } +} + +static void tegra_xusb_restore_context(struct tegra_xusb *tegra) +{ + const struct tegra_xusb_context_soc *soc = tegra->soc->context; + struct tegra_xusb_context *ctx = &tegra->context; + unsigned int i; + + if (soc->fpci.num_offsets > 0) { + for (i = 0; i < soc->fpci.num_offsets; i++) + fpci_writel(tegra, ctx->fpci[i], soc->fpci.offsets[i]); + } + + if (soc->ipfs.num_offsets > 0) { + for (i = 0; i < soc->ipfs.num_offsets; i++) + ipfs_writel(tegra, ctx->ipfs[i], soc->ipfs.offsets[i]); + } +} + +static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool wakeup) +{ + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + int err; + + err = tegra_xusb_check_ports(tegra); + if (err < 0) { + dev_err(tegra->dev, "not all ports suspended: %d\n", err); + return err; + } + + err = xhci_suspend(xhci, wakeup); + if (err < 0) { + dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err); + return err; + } + + tegra_xusb_save_context(tegra); + tegra_xusb_phy_disable(tegra); + tegra_xusb_clk_disable(tegra); + + return 0; +} + +static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool wakeup) +{ + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + int err; + + err = tegra_xusb_clk_enable(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to enable clocks: %d\n", err); + return err; + } + + err = tegra_xusb_phy_enable(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to enable PHYs: %d\n", err); + goto disable_clk; + } + + tegra_xusb_config(tegra); + tegra_xusb_restore_context(tegra); + + err = tegra_xusb_load_firmware(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to load firmware: %d\n", err); + goto disable_phy; + } + + err = __tegra_xusb_enable_firmware_messages(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to enable messages: %d\n", err); + goto disable_phy; + } + + err = xhci_resume(xhci, true); + if (err < 0) { + dev_err(tegra->dev, "failed to resume XHCI: %d\n", err); + goto disable_phy; + } + + return 0; + +disable_phy: + tegra_xusb_phy_disable(tegra); +disable_clk: + tegra_xusb_clk_disable(tegra); + return err; +} + static int tegra_xusb_suspend(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); - struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); bool wakeup = device_may_wakeup(dev); + int err; + + synchronize_irq(tegra->mbox_irq); - /* TODO: Powergate controller across suspend/resume. */ - return xhci_suspend(xhci, wakeup); + mutex_lock(&tegra->lock); + err = tegra_xusb_enter_elpg(tegra, wakeup); + mutex_unlock(&tegra->lock); + + return err; } static int tegra_xusb_resume(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); - struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + bool wakeup = device_may_wakeup(dev); + int err; - return xhci_resume(xhci, 0); + mutex_lock(&tegra->lock); + err = tegra_xusb_exit_elpg(tegra, wakeup); + mutex_unlock(&tegra->lock); + + return err; } #endif @@ -1370,12 +1643,50 @@ static const struct tegra_xusb_phy_type tegra124_phy_types[] = { { .name = "hsic", .num = 2, }, }; +static const unsigned int tegra124_xusb_context_ipfs[] = { + IPFS_XUSB_HOST_MSI_BAR_SZ_0, + IPFS_XUSB_HOST_MSI_BAR_SZ_0, + IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0, + IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0, + IPFS_XUSB_HOST_MSI_VEC0_0, + IPFS_XUSB_HOST_MSI_EN_VEC0_0, + IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0, + IPFS_XUSB_HOST_INTR_MASK_0, + IPFS_XUSB_HOST_INTR_ENABLE_0, + IPFS_XUSB_HOST_UFPCI_CONFIG_0, + IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0, + IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0, +}; + +static const unsigned int tegra124_xusb_context_fpci[] = { + XUSB_CFG_ARU_CONTEXT_HS_PLS, + XUSB_CFG_ARU_CONTEXT_FS_PLS, + XUSB_CFG_ARU_CONTEXT_HSFS_SPEED, + XUSB_CFG_ARU_CONTEXT_HSFS_PP, + XUSB_CFG_ARU_CONTEXT, + XUSB_CFG_AXI_CFG, + XUSB_CFG_24, + XUSB_CFG_16, +}; + +static const struct tegra_xusb_context_soc tegra124_xusb_context = { + .ipfs = { + .num_offsets = ARRAY_SIZE(tegra124_xusb_context_ipfs), + .offsets = tegra124_xusb_context_ipfs, + }, + .fpci = { + .num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci), + .offsets = tegra124_xusb_context_fpci, + }, +}; + static const struct tegra_xusb_soc tegra124_soc = { .firmware = "nvidia/tegra124/xusb.bin", .supply_names = tegra124_supply_names, .num_supplies = ARRAY_SIZE(tegra124_supply_names), .phy_types = tegra124_phy_types, .num_types = ARRAY_SIZE(tegra124_phy_types), + .context = &tegra124_xusb_context, .ports = { .usb2 = { .offset = 4, .count = 4, }, .hsic = { .offset = 6, .count = 2, }, @@ -1414,6 +1725,7 @@ static const struct tegra_xusb_soc tegra210_soc = { .num_supplies = ARRAY_SIZE(tegra210_supply_names), .phy_types = tegra210_phy_types, .num_types = ARRAY_SIZE(tegra210_phy_types), + .context = &tegra124_xusb_context, .ports = { .usb2 = { .offset = 4, .count = 4, }, .hsic = { .offset = 8, .count = 1, }, @@ -1432,6 +1744,7 @@ MODULE_FIRMWARE("nvidia/tegra210/xusb.bin"); static const char * const tegra186_supply_names[] = { }; +MODULE_FIRMWARE("nvidia/tegra186/xusb.bin"); static const struct tegra_xusb_phy_type tegra186_phy_types[] = { { .name = "usb3", .num = 3, }, @@ -1439,12 +1752,20 @@ static const struct tegra_xusb_phy_type tegra186_phy_types[] = { { .name = "hsic", .num = 1, }, }; +static const struct tegra_xusb_context_soc tegra186_xusb_context = { + .fpci = { + .num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci), + .offsets = tegra124_xusb_context_fpci, + }, +}; + static const struct tegra_xusb_soc tegra186_soc = { .firmware = "nvidia/tegra186/xusb.bin", .supply_names = tegra186_supply_names, .num_supplies = ARRAY_SIZE(tegra186_supply_names), .phy_types = tegra186_phy_types, .num_types = ARRAY_SIZE(tegra186_phy_types), + .context = &tegra186_xusb_context, .ports = { .usb3 = { .offset = 0, .count = 3, }, .usb2 = { .offset = 3, .count = 3, }, @@ -1474,6 +1795,7 @@ static const struct tegra_xusb_soc tegra194_soc = { .num_supplies = ARRAY_SIZE(tegra194_supply_names), .phy_types = tegra194_phy_types, .num_types = ARRAY_SIZE(tegra194_phy_types), + .context = &tegra186_xusb_context, .ports = { .usb3 = { .offset = 0, .count = 4, }, .usb2 = { .offset = 4, .count = 4, }, diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 72f39a9751b5..116bd789e568 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -7,11 +7,10 @@ #include <linux/clk.h> #include <linux/i2c.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/platform_data/usb3503.h> #include <linux/regmap.h> @@ -47,19 +46,19 @@ struct usb3503 { struct device *dev; struct clk *clk; u8 port_off_mask; - int gpio_intn; - int gpio_reset; - int gpio_connect; + struct gpio_desc *intn; + struct gpio_desc *reset; + struct gpio_desc *connect; bool secondary_ref_clk; }; static int usb3503_reset(struct usb3503 *hub, int state) { - if (!state && gpio_is_valid(hub->gpio_connect)) - gpio_set_value_cansleep(hub->gpio_connect, 0); + if (!state && hub->connect) + gpiod_set_value_cansleep(hub->connect, 0); - if (gpio_is_valid(hub->gpio_reset)) - gpio_set_value_cansleep(hub->gpio_reset, state); + if (hub->reset) + gpiod_set_value_cansleep(hub->reset, !state); /* Wait T_HUBINIT == 4ms for hub logic to stabilize */ if (state) @@ -115,8 +114,8 @@ static int usb3503_connect(struct usb3503 *hub) } } - if (gpio_is_valid(hub->gpio_connect)) - gpio_set_value_cansleep(hub->gpio_connect, 1); + if (hub->connect) + gpiod_set_value_cansleep(hub->connect, 1); hub->mode = USB3503_MODE_HUB; dev_info(dev, "switched to HUB mode\n"); @@ -163,13 +162,11 @@ static int usb3503_probe(struct usb3503 *hub) int err; u32 mode = USB3503_MODE_HUB; const u32 *property; + enum gpiod_flags flags; int len; if (pdata) { hub->port_off_mask = pdata->port_off_mask; - hub->gpio_intn = pdata->gpio_intn; - hub->gpio_connect = pdata->gpio_connect; - hub->gpio_reset = pdata->gpio_reset; hub->mode = pdata->initial_mode; } else if (np) { u32 rate = 0; @@ -230,59 +227,38 @@ static int usb3503_probe(struct usb3503 *hub) } } - hub->gpio_intn = of_get_named_gpio(np, "intn-gpios", 0); - if (hub->gpio_intn == -EPROBE_DEFER) - return -EPROBE_DEFER; - hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0); - if (hub->gpio_connect == -EPROBE_DEFER) - return -EPROBE_DEFER; - hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0); - if (hub->gpio_reset == -EPROBE_DEFER) - return -EPROBE_DEFER; of_property_read_u32(np, "initial-mode", &mode); hub->mode = mode; } - if (hub->port_off_mask && !hub->regmap) - dev_err(dev, "Ports disabled with no control interface\n"); - - if (gpio_is_valid(hub->gpio_intn)) { - int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW : - GPIOF_OUT_INIT_HIGH; - err = devm_gpio_request_one(dev, hub->gpio_intn, val, - "usb3503 intn"); - if (err) { - dev_err(dev, - "unable to request GPIO %d as interrupt pin (%d)\n", - hub->gpio_intn, err); - return err; - } - } - - if (gpio_is_valid(hub->gpio_connect)) { - err = devm_gpio_request_one(dev, hub->gpio_connect, - GPIOF_OUT_INIT_LOW, "usb3503 connect"); - if (err) { - dev_err(dev, - "unable to request GPIO %d as connect pin (%d)\n", - hub->gpio_connect, err); - return err; - } - } - - if (gpio_is_valid(hub->gpio_reset)) { - err = devm_gpio_request_one(dev, hub->gpio_reset, - GPIOF_OUT_INIT_LOW, "usb3503 reset"); + if (hub->secondary_ref_clk) + flags = GPIOD_OUT_LOW; + else + flags = GPIOD_OUT_HIGH; + hub->intn = devm_gpiod_get_optional(dev, "intn", flags); + if (IS_ERR(hub->intn)) + return PTR_ERR(hub->intn); + if (hub->intn) + gpiod_set_consumer_name(hub->intn, "usb3503 intn"); + + hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); + if (IS_ERR(hub->connect)) + return PTR_ERR(hub->connect); + if (hub->connect) + gpiod_set_consumer_name(hub->connect, "usb3503 connect"); + + hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(hub->reset)) + return PTR_ERR(hub->reset); + if (hub->reset) { /* Datasheet defines a hardware reset to be at least 100us */ usleep_range(100, 10000); - if (err) { - dev_err(dev, - "unable to request GPIO %d as reset pin (%d)\n", - hub->gpio_reset, err); - return err; - } + gpiod_set_consumer_name(hub->reset, "usb3503 reset"); } + if (hub->port_off_mask && !hub->regmap) + dev_err(dev, "Ports disabled with no control interface\n"); + usb3503_switch_mode(hub, hub->mode); dev_info(dev, "%s: probed in %s mode\n", __func__, diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 52f8e2b57ad5..eb2ded1026ee 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -101,7 +101,6 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - select USB_MUSB_AM335X_CHILD depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on OF_IRQ @@ -111,13 +110,16 @@ config USB_MUSB_UX500 config USB_MUSB_JZ4740 tristate "JZ4740" - depends on NOP_USB_XCEIV depends on MIPS || COMPILE_TEST depends on USB_MUSB_GADGET depends on USB=n || USB_OTG_BLACKLIST_HUB -config USB_MUSB_AM335X_CHILD - tristate +config USB_MUSB_MEDIATEK + tristate "MediaTek platforms" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on NOP_USB_XCEIV + depends on GENERIC_PHY + select USB_ROLE_SWITCH comment "MUSB DMA mode" @@ -142,7 +144,7 @@ config USB_UX500_DMA config USB_INVENTRA_DMA bool 'Inventra' - depends on USB_MUSB_OMAP2PLUS + depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 3a88c79e650c..932247360a9f 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -24,9 +24,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o obj-$(CONFIG_USB_MUSB_UX500) += ux500.o obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o - - -obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o +obj-$(CONFIG_USB_MUSB_MEDIATEK) += mediatek.o # the kconfig must guarantee that only one of the # possible I/O schemes will be enabled at a time ... diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index fb6bbd254ab7..704435526394 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -13,7 +13,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/usb_phy_generic.h> @@ -25,10 +25,6 @@ #include "musb_core.h" -#ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 160 -#endif - #include "davinci.h" #include "cppi_dma.h" @@ -40,6 +36,9 @@ struct davinci_glue { struct device *dev; struct platform_device *musb; struct clk *clk; + bool vbus_state; + struct gpio_desc *vbus; + struct work_struct vbus_work; }; /* REVISIT (PM) we should be able to keep the PHY in low power mode most @@ -135,43 +134,44 @@ static void davinci_musb_disable(struct musb *musb) * when J10 is out, and TI documents it as handling OTG. */ -#ifdef CONFIG_MACH_DAVINCI_EVM - -static int vbus_state = -1; - /* I2C operations are always synchronous, and require a task context. * With unloaded systems, using the shared workqueue seems to suffice * to satisfy the 100msec A_WAIT_VRISE timeout... */ -static void evm_deferred_drvvbus(struct work_struct *ignored) +static void evm_deferred_drvvbus(struct work_struct *work) { - gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); - vbus_state = !vbus_state; -} + struct davinci_glue *glue = container_of(work, struct davinci_glue, + vbus_work); -#endif /* EVM */ + gpiod_set_value_cansleep(glue->vbus, glue->vbus_state); + glue->vbus_state = !glue->vbus_state; +} -static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate) +static void davinci_musb_source_power(struct musb *musb, int is_on, + int immediate) { -#ifdef CONFIG_MACH_DAVINCI_EVM + struct davinci_glue *glue = dev_get_drvdata(musb->controller->parent); + + /* This GPIO handling is entirely optional */ + if (!glue->vbus) + return; + if (is_on) is_on = 1; - if (vbus_state == is_on) + if (glue->vbus_state == is_on) return; - vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */ + /* 0/1 vs "-1 == unknown/init" */ + glue->vbus_state = !is_on; if (machine_is_davinci_evm()) { - static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); - if (immediate) - gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); + gpiod_set_value_cansleep(glue->vbus, glue->vbus_state); else - schedule_work(&evm_vbus_work); + schedule_work(&glue->vbus_work); } if (immediate) - vbus_state = is_on; -#endif + glue->vbus_state = is_on; } static void davinci_musb_set_vbus(struct musb *musb, int is_on) @@ -524,6 +524,15 @@ static int davinci_probe(struct platform_device *pdev) pdata->platform_ops = &davinci_ops; + glue->vbus = devm_gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW); + if (IS_ERR(glue->vbus)) { + ret = PTR_ERR(glue->vbus); + goto err0; + } else { + glue->vbus_state = -1; + INIT_WORK(&glue->vbus_work, evm_deferred_drvvbus); + } + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c index e3b8c84ccdb8..bc0109f4700b 100644 --- a/drivers/usb/musb/jz4740.c +++ b/drivers/usb/musb/jz4740.c @@ -17,16 +17,15 @@ #include "musb_core.h" struct jz4740_glue { - struct device *dev; - struct platform_device *musb; + struct platform_device *pdev; struct clk *clk; }; static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) { - unsigned long flags; - irqreturn_t retval = IRQ_NONE; - struct musb *musb = __hci; + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; spin_lock_irqsave(&musb->lock, flags); @@ -40,7 +39,7 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) * never see them set */ musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME | - MUSB_INTR_RESET | MUSB_INTR_SOF; + MUSB_INTR_RESET | MUSB_INTR_SOF; if (musb->int_usb || musb->int_tx || musb->int_rx) retval = musb_interrupt(musb); @@ -51,25 +50,20 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) } static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = { -{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, -{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, -{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, }, + { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, }, }; static const struct musb_hdrc_config jz4740_musb_config = { /* Silicon does not implement USB OTG. */ - .multipoint = 0, + .multipoint = 0, /* Max EPs scanned, driver will decide which EP can be used. */ - .num_eps = 4, + .num_eps = 4, /* RAMbits needed to configure EPs from table */ - .ram_bits = 9, - .fifo_cfg = jz4740_musb_fifo_cfg, - .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg), -}; - -static struct musb_hdrc_platform_data jz4740_musb_platform_data = { - .mode = MUSB_PERIPHERAL, - .config = &jz4740_musb_config, + .ram_bits = 9, + .fifo_cfg = jz4740_musb_fifo_cfg, + .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg), }; static int jz4740_musb_init(struct musb *musb) @@ -88,7 +82,8 @@ static int jz4740_musb_init(struct musb *musb) return err; } - /* Silicon does not implement ConfigData register. + /* + * Silicon does not implement ConfigData register. * Set dyn_fifo to avoid reading EP config from hardware. */ musb->dyn_fifo = true; @@ -108,63 +103,67 @@ static const struct musb_platform_ops jz4740_musb_ops = { .init = jz4740_musb_init, }; +static const struct musb_hdrc_platform_data jz4740_musb_pdata = { + .mode = MUSB_PERIPHERAL, + .config = &jz4740_musb_config, + .platform_ops = &jz4740_musb_ops, +}; + static int jz4740_probe(struct platform_device *pdev) { - struct musb_hdrc_platform_data *pdata = &jz4740_musb_platform_data; + struct device *dev = &pdev->dev; + const struct musb_hdrc_platform_data *pdata = &jz4740_musb_pdata; struct platform_device *musb; struct jz4740_glue *glue; - struct clk *clk; + struct clk *clk; int ret; - glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); if (!glue) return -ENOMEM; musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); + dev_err(dev, "failed to allocate musb device"); return -ENOMEM; } - clk = devm_clk_get(&pdev->dev, "udc"); + clk = devm_clk_get(dev, "udc"); if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get clock\n"); + dev_err(dev, "failed to get clock"); ret = PTR_ERR(clk); goto err_platform_device_put; } ret = clk_prepare_enable(clk); if (ret) { - dev_err(&pdev->dev, "failed to enable clock\n"); + dev_err(dev, "failed to enable clock"); goto err_platform_device_put; } - musb->dev.parent = &pdev->dev; + musb->dev.parent = dev; - glue->dev = &pdev->dev; - glue->musb = musb; + glue->pdev = musb; glue->clk = clk; - pdata->platform_ops = &jz4740_musb_ops; - platform_set_drvdata(pdev, glue); ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources); if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); + dev_err(dev, "failed to add resources"); goto err_clk_disable; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); + dev_err(dev, "failed to add platform_data"); goto err_clk_disable; } ret = platform_device_add(musb); if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); + dev_err(dev, "failed to register musb device"); goto err_clk_disable; } @@ -179,9 +178,9 @@ err_platform_device_put: static int jz4740_remove(struct platform_device *pdev) { - struct jz4740_glue *glue = platform_get_drvdata(pdev); + struct jz4740_glue *glue = platform_get_drvdata(pdev); - platform_device_unregister(glue->musb); + platform_device_unregister(glue->pdev); clk_disable_unprepare(glue->clk); return 0; @@ -190,7 +189,7 @@ static int jz4740_remove(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id jz4740_musb_of_match[] = { { .compatible = "ingenic,jz4740-musb" }, - {}, + { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, jz4740_musb_of_match); #endif diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c new file mode 100644 index 000000000000..6b88c2f5d970 --- /dev/null +++ b/drivers/usb/musb/mediatek.c @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 MediaTek Inc. + * + * Author: + * Min Guo <min.guo@mediatek.com> + * Yonglong Wu <yonglong.wu@mediatek.com> + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/usb/role.h> +#include <linux/usb/usb_phy_generic.h> +#include "musb_core.h" +#include "musb_dma.h" + +#define USB_L1INTS 0x00a0 +#define USB_L1INTM 0x00a4 +#define MTK_MUSB_TXFUNCADDR 0x0480 + +/* MediaTek controller toggle enable and status reg */ +#define MUSB_RXTOG 0x80 +#define MUSB_RXTOGEN 0x82 +#define MUSB_TXTOG 0x84 +#define MUSB_TXTOGEN 0x86 +#define MTK_TOGGLE_EN GENMASK(15, 0) + +#define TX_INT_STATUS BIT(0) +#define RX_INT_STATUS BIT(1) +#define USBCOM_INT_STATUS BIT(2) +#define DMA_INT_STATUS BIT(3) + +#define DMA_INTR_STATUS_MSK GENMASK(7, 0) +#define DMA_INTR_UNMASK_SET_MSK GENMASK(31, 24) + +struct mtk_glue { + struct device *dev; + struct musb *musb; + struct platform_device *musb_pdev; + struct platform_device *usb_phy; + struct phy *phy; + struct usb_phy *xceiv; + enum phy_mode phy_mode; + struct clk *main; + struct clk *mcu; + struct clk *univpll; + enum usb_role role; + struct usb_role_switch *role_sw; +}; + +static int mtk_musb_clks_get(struct mtk_glue *glue) +{ + struct device *dev = glue->dev; + + glue->main = devm_clk_get(dev, "main"); + if (IS_ERR(glue->main)) { + dev_err(dev, "fail to get main clock\n"); + return PTR_ERR(glue->main); + } + + glue->mcu = devm_clk_get(dev, "mcu"); + if (IS_ERR(glue->mcu)) { + dev_err(dev, "fail to get mcu clock\n"); + return PTR_ERR(glue->mcu); + } + + glue->univpll = devm_clk_get(dev, "univpll"); + if (IS_ERR(glue->univpll)) { + dev_err(dev, "fail to get univpll clock\n"); + return PTR_ERR(glue->univpll); + } + + return 0; +} + +static int mtk_musb_clks_enable(struct mtk_glue *glue) +{ + int ret; + + ret = clk_prepare_enable(glue->main); + if (ret) { + dev_err(glue->dev, "failed to enable main clock\n"); + goto err_main_clk; + } + + ret = clk_prepare_enable(glue->mcu); + if (ret) { + dev_err(glue->dev, "failed to enable mcu clock\n"); + goto err_mcu_clk; + } + + ret = clk_prepare_enable(glue->univpll); + if (ret) { + dev_err(glue->dev, "failed to enable univpll clock\n"); + goto err_univpll_clk; + } + + return 0; + +err_univpll_clk: + clk_disable_unprepare(glue->mcu); +err_mcu_clk: + clk_disable_unprepare(glue->main); +err_main_clk: + return ret; +} + +static void mtk_musb_clks_disable(struct mtk_glue *glue) +{ + clk_disable_unprepare(glue->univpll); + clk_disable_unprepare(glue->mcu); + clk_disable_unprepare(glue->main); +} + +static int musb_usb_role_sx_set(struct device *dev, enum usb_role role) +{ + struct mtk_glue *glue = dev_get_drvdata(dev); + struct musb *musb = glue->musb; + u8 devctl = readb(musb->mregs + MUSB_DEVCTL); + enum usb_role new_role; + + if (role == glue->role) + return 0; + + switch (role) { + case USB_ROLE_HOST: + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + glue->phy_mode = PHY_MODE_USB_HOST; + new_role = USB_ROLE_HOST; + if (glue->role == USB_ROLE_NONE) + phy_power_on(glue->phy); + + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + MUSB_HST_MODE(musb); + break; + case USB_ROLE_DEVICE: + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + glue->phy_mode = PHY_MODE_USB_DEVICE; + new_role = USB_ROLE_DEVICE; + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + if (glue->role == USB_ROLE_NONE) + phy_power_on(glue->phy); + + MUSB_DEV_MODE(musb); + break; + case USB_ROLE_NONE: + glue->phy_mode = PHY_MODE_USB_OTG; + new_role = USB_ROLE_NONE; + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + if (glue->role != USB_ROLE_NONE) + phy_power_off(glue->phy); + + break; + default: + dev_err(glue->dev, "Invalid State\n"); + return -EINVAL; + } + + glue->role = new_role; + phy_set_mode(glue->phy, glue->phy_mode); + + return 0; +} + +static enum usb_role musb_usb_role_sx_get(struct device *dev) +{ + struct mtk_glue *glue = dev_get_drvdata(dev); + + return glue->role; +} + +static int mtk_otg_switch_init(struct mtk_glue *glue) +{ + struct usb_role_switch_desc role_sx_desc = { 0 }; + + role_sx_desc.set = musb_usb_role_sx_set; + role_sx_desc.get = musb_usb_role_sx_get; + role_sx_desc.fwnode = dev_fwnode(glue->dev); + glue->role_sw = usb_role_switch_register(glue->dev, &role_sx_desc); + + return PTR_ERR_OR_ZERO(glue->role_sw); +} + +static void mtk_otg_switch_exit(struct mtk_glue *glue) +{ + return usb_role_switch_unregister(glue->role_sw); +} + +static irqreturn_t generic_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + musb->int_usb = musb_clearb(musb->mregs, MUSB_INTRUSB); + musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX); + musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return retval; +} + +static irqreturn_t mtk_musb_interrupt(int irq, void *dev_id) +{ + irqreturn_t retval = IRQ_NONE; + struct musb *musb = (struct musb *)dev_id; + u32 l1_ints; + + l1_ints = musb_readl(musb->mregs, USB_L1INTS) & + musb_readl(musb->mregs, USB_L1INTM); + + if (l1_ints & (TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS)) + retval = generic_interrupt(irq, musb); + +#if defined(CONFIG_USB_INVENTRA_DMA) + if (l1_ints & DMA_INT_STATUS) + retval = dma_controller_irq(irq, musb->dma_controller); +#endif + return retval; +} + +static u32 mtk_musb_busctl_offset(u8 epnum, u16 offset) +{ + return MTK_MUSB_TXFUNCADDR + offset + 8 * epnum; +} + +static u8 mtk_musb_clearb(void __iomem *addr, unsigned int offset) +{ + u8 data; + + /* W1C */ + data = musb_readb(addr, offset); + musb_writeb(addr, offset, data); + return data; +} + +static u16 mtk_musb_clearw(void __iomem *addr, unsigned int offset) +{ + u16 data; + + /* W1C */ + data = musb_readw(addr, offset); + musb_writew(addr, offset, data); + return data; +} + +static int mtk_musb_set_mode(struct musb *musb, u8 mode) +{ + struct device *dev = musb->controller; + struct mtk_glue *glue = dev_get_drvdata(dev->parent); + enum phy_mode new_mode; + enum usb_role new_role; + + switch (mode) { + case MUSB_HOST: + new_mode = PHY_MODE_USB_HOST; + new_role = USB_ROLE_HOST; + break; + case MUSB_PERIPHERAL: + new_mode = PHY_MODE_USB_DEVICE; + new_role = USB_ROLE_DEVICE; + break; + case MUSB_OTG: + new_mode = PHY_MODE_USB_OTG; + new_role = USB_ROLE_NONE; + break; + default: + dev_err(glue->dev, "Invalid mode request\n"); + return -EINVAL; + } + + if (glue->phy_mode == new_mode) + return 0; + + if (musb->port_mode != MUSB_OTG) { + dev_err(glue->dev, "Does not support changing modes\n"); + return -EINVAL; + } + + glue->role = new_role; + musb_usb_role_sx_set(dev, glue->role); + return 0; +} + +static int mtk_musb_init(struct musb *musb) +{ + struct device *dev = musb->controller; + struct mtk_glue *glue = dev_get_drvdata(dev->parent); + int ret; + + glue->musb = musb; + musb->phy = glue->phy; + musb->xceiv = glue->xceiv; + musb->is_host = false; + musb->isr = mtk_musb_interrupt; + + /* Set TX/RX toggle enable */ + musb_writew(musb->mregs, MUSB_TXTOGEN, MTK_TOGGLE_EN); + musb_writew(musb->mregs, MUSB_RXTOGEN, MTK_TOGGLE_EN); + + if (musb->port_mode == MUSB_OTG) { + ret = mtk_otg_switch_init(glue); + if (ret) + return ret; + } + + ret = phy_init(glue->phy); + if (ret) + goto err_phy_init; + + ret = phy_power_on(glue->phy); + if (ret) + goto err_phy_power_on; + + phy_set_mode(glue->phy, glue->phy_mode); + +#if defined(CONFIG_USB_INVENTRA_DMA) + musb_writel(musb->mregs, MUSB_HSDMA_INTR, + DMA_INTR_STATUS_MSK | DMA_INTR_UNMASK_SET_MSK); +#endif + musb_writel(musb->mregs, USB_L1INTM, TX_INT_STATUS | RX_INT_STATUS | + USBCOM_INT_STATUS | DMA_INT_STATUS); + return 0; + +err_phy_power_on: + phy_exit(glue->phy); +err_phy_init: + mtk_otg_switch_exit(glue); + return ret; +} + +static u16 mtk_musb_get_toggle(struct musb_qh *qh, int is_out) +{ + struct musb *musb = qh->hw_ep->musb; + u8 epnum = qh->hw_ep->epnum; + u16 toggle; + + toggle = musb_readw(musb->mregs, is_out ? MUSB_TXTOG : MUSB_RXTOG); + return toggle & (1 << epnum); +} + +static u16 mtk_musb_set_toggle(struct musb_qh *qh, int is_out, struct urb *urb) +{ + struct musb *musb = qh->hw_ep->musb; + u8 epnum = qh->hw_ep->epnum; + u16 value, toggle; + + toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); + + if (is_out) { + value = musb_readw(musb->mregs, MUSB_TXTOG); + value |= toggle << epnum; + musb_writew(musb->mregs, MUSB_TXTOG, value); + } else { + value = musb_readw(musb->mregs, MUSB_RXTOG); + value |= toggle << epnum; + musb_writew(musb->mregs, MUSB_RXTOG, value); + } + + return 0; +} + +static int mtk_musb_exit(struct musb *musb) +{ + struct device *dev = musb->controller; + struct mtk_glue *glue = dev_get_drvdata(dev->parent); + + mtk_otg_switch_exit(glue); + phy_power_off(glue->phy); + phy_exit(glue->phy); + mtk_musb_clks_disable(glue); + + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + return 0; +} + +static const struct musb_platform_ops mtk_musb_ops = { + .quirks = MUSB_DMA_INVENTRA, + .init = mtk_musb_init, + .get_toggle = mtk_musb_get_toggle, + .set_toggle = mtk_musb_set_toggle, + .exit = mtk_musb_exit, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create_noirq, + .dma_exit = musbhs_dma_controller_destroy, +#endif + .clearb = mtk_musb_clearb, + .clearw = mtk_musb_clearw, + .busctl_offset = mtk_musb_busctl_offset, + .set_mode = mtk_musb_set_mode, +}; + +#define MTK_MUSB_MAX_EP_NUM 8 +#define MTK_MUSB_RAM_BITS 11 + +static struct musb_fifo_cfg mtk_musb_mode_cfg[] = { + { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 1024, }, + { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 1024, }, + { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 64, }, +}; + +static const struct musb_hdrc_config mtk_musb_hdrc_config = { + .fifo_cfg = mtk_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(mtk_musb_mode_cfg), + .multipoint = true, + .dyn_fifo = true, + .num_eps = MTK_MUSB_MAX_EP_NUM, + .ram_bits = MTK_MUSB_RAM_BITS, +}; + +static const struct platform_device_info mtk_dev_info = { + .name = "musb-hdrc", + .id = PLATFORM_DEVID_AUTO, + .dma_mask = DMA_BIT_MASK(32), +}; + +static int mtk_musb_probe(struct platform_device *pdev) +{ + struct musb_hdrc_platform_data *pdata; + struct mtk_glue *glue; + struct platform_device_info pinfo; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int ret = -ENOMEM; + + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->dev = dev; + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to create child devices at %p\n", np); + return ret; + } + + ret = mtk_musb_clks_get(glue); + if (ret) + return ret; + + pdata->config = &mtk_musb_hdrc_config; + pdata->platform_ops = &mtk_musb_ops; + pdata->mode = usb_get_dr_mode(dev); + + if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) + pdata->mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_MUSB_GADGET)) + pdata->mode = USB_DR_MODE_PERIPHERAL; + + switch (pdata->mode) { + case USB_DR_MODE_HOST: + glue->phy_mode = PHY_MODE_USB_HOST; + glue->role = USB_ROLE_HOST; + break; + case USB_DR_MODE_PERIPHERAL: + glue->phy_mode = PHY_MODE_USB_DEVICE; + glue->role = USB_ROLE_DEVICE; + break; + case USB_DR_MODE_OTG: + glue->phy_mode = PHY_MODE_USB_OTG; + glue->role = USB_ROLE_NONE; + break; + default: + dev_err(&pdev->dev, "Error 'dr_mode' property\n"); + return -EINVAL; + } + + glue->phy = devm_of_phy_get_by_index(dev, np, 0); + if (IS_ERR(glue->phy)) { + dev_err(dev, "fail to getting phy %ld\n", + PTR_ERR(glue->phy)); + return PTR_ERR(glue->phy); + } + + glue->usb_phy = usb_phy_generic_register(); + if (IS_ERR(glue->usb_phy)) { + dev_err(dev, "fail to registering usb-phy %ld\n", + PTR_ERR(glue->usb_phy)); + return PTR_ERR(glue->usb_phy); + } + + glue->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(glue->xceiv)) { + dev_err(dev, "fail to getting usb-phy %d\n", ret); + ret = PTR_ERR(glue->xceiv); + goto err_unregister_usb_phy; + } + + platform_set_drvdata(pdev, glue); + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + + ret = mtk_musb_clks_enable(glue); + if (ret) + goto err_enable_clk; + + pinfo = mtk_dev_info; + pinfo.parent = dev; + pinfo.res = pdev->resource; + pinfo.num_res = pdev->num_resources; + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + + glue->musb_pdev = platform_device_register_full(&pinfo); + if (IS_ERR(glue->musb_pdev)) { + ret = PTR_ERR(glue->musb_pdev); + dev_err(dev, "failed to register musb device: %d\n", ret); + goto err_device_register; + } + + return 0; + +err_device_register: + mtk_musb_clks_disable(glue); +err_enable_clk: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); +err_unregister_usb_phy: + usb_phy_generic_unregister(glue->usb_phy); + return ret; +} + +static int mtk_musb_remove(struct platform_device *pdev) +{ + struct mtk_glue *glue = platform_get_drvdata(pdev); + struct platform_device *usb_phy = glue->usb_phy; + + platform_device_unregister(glue->musb_pdev); + usb_phy_generic_unregister(usb_phy); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id mtk_musb_match[] = { + {.compatible = "mediatek,mtk-musb",}, + {}, +}; +MODULE_DEVICE_TABLE(of, mtk_musb_match); +#endif + +static struct platform_driver mtk_musb_driver = { + .probe = mtk_musb_probe, + .remove = mtk_musb_remove, + .driver = { + .name = "musb-mtk", + .of_match_table = of_match_ptr(mtk_musb_match), + }, +}; + +module_platform_driver(mtk_musb_driver); + +MODULE_DESCRIPTION("MediaTek MUSB Glue Layer"); +MODULE_AUTHOR("Min Guo <min.guo@mediatek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c deleted file mode 100644 index 5f04f8e3a640..000000000000 --- a/drivers/usb/musb/musb_am335x.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/module.h> -#include <linux/of_platform.h> - -static int am335x_child_probe(struct platform_device *pdev) -{ - int ret; - - pm_runtime_enable(&pdev->dev); - - ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); - if (ret) - goto err; - - return 0; -err: - pm_runtime_disable(&pdev->dev); - return ret; -} - -static const struct of_device_id am335x_child_of_match[] = { - { .compatible = "ti,am33xx-usb" }, - { }, -}; -MODULE_DEVICE_TABLE(of, am335x_child_of_match); - -static struct platform_driver am335x_child_driver = { - .probe = am335x_child_probe, - .driver = { - .name = "am335x-usb-childs", - .of_match_table = am335x_child_of_match, - }, -}; - -static int __init am335x_child_init(void) -{ - return platform_driver_register(&am335x_child_driver); -} -module_init(am335x_child_init); - -MODULE_DESCRIPTION("AM33xx child devices"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5ebf30bd61bd..f616fb489542 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -73,6 +73,7 @@ #include <linux/prefetch.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/dma-mapping.h> #include <linux/usb.h> #include <linux/usb/of.h> @@ -246,7 +247,7 @@ static u32 musb_default_busctl_offset(u8 epnum, u16 offset) return 0x80 + (0x08 * epnum) + offset; } -static u8 musb_default_readb(const void __iomem *addr, unsigned offset) +static u8 musb_default_readb(void __iomem *addr, u32 offset) { u8 data = __raw_readb(addr + offset); @@ -254,13 +255,13 @@ static u8 musb_default_readb(const void __iomem *addr, unsigned offset) return data; } -static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data) +static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data) { trace_musb_writeb(__builtin_return_address(0), addr, offset, data); __raw_writeb(data, addr + offset); } -static u16 musb_default_readw(const void __iomem *addr, unsigned offset) +static u16 musb_default_readw(void __iomem *addr, u32 offset) { u16 data = __raw_readw(addr + offset); @@ -268,12 +269,44 @@ static u16 musb_default_readw(const void __iomem *addr, unsigned offset) return data; } -static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data) +static void musb_default_writew(void __iomem *addr, u32 offset, u16 data) { trace_musb_writew(__builtin_return_address(0), addr, offset, data); __raw_writew(data, addr + offset); } +static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out) +{ + void __iomem *epio = qh->hw_ep->regs; + u16 csr; + + if (is_out) + csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; + else + csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; + + return csr; +} + +static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out, + struct urb *urb) +{ + u16 csr; + u16 toggle; + + toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); + + if (is_out) + csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE + | MUSB_TXCSR_H_DATATOGGLE) + : MUSB_TXCSR_CLRDATATOG; + else + csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE + | MUSB_RXCSR_H_DATATOGGLE) : 0; + + return csr; +} + /* * Load an endpoint's FIFO */ @@ -364,19 +397,25 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) /* * Old style IO functions */ -u8 (*musb_readb)(const void __iomem *addr, unsigned offset); +u8 (*musb_readb)(void __iomem *addr, u32 offset); EXPORT_SYMBOL_GPL(musb_readb); -void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); +void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data); EXPORT_SYMBOL_GPL(musb_writeb); -u16 (*musb_readw)(const void __iomem *addr, unsigned offset); +u8 (*musb_clearb)(void __iomem *addr, u32 offset); +EXPORT_SYMBOL_GPL(musb_clearb); + +u16 (*musb_readw)(void __iomem *addr, u32 offset); EXPORT_SYMBOL_GPL(musb_readw); -void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); +void (*musb_writew)(void __iomem *addr, u32 offset, u16 data); EXPORT_SYMBOL_GPL(musb_writew); -u32 musb_readl(const void __iomem *addr, unsigned offset) +u16 (*musb_clearw)(void __iomem *addr, u32 offset); +EXPORT_SYMBOL_GPL(musb_clearw); + +u32 musb_readl(void __iomem *addr, u32 offset) { u32 data = __raw_readl(addr + offset); @@ -385,7 +424,7 @@ u32 musb_readl(const void __iomem *addr, unsigned offset) } EXPORT_SYMBOL_GPL(musb_readl); -void musb_writel(void __iomem *addr, unsigned offset, u32 data) +void musb_writel(void __iomem *addr, u32 offset, u32 data) { trace_musb_writel(__builtin_return_address(0), addr, offset, data); __raw_writel(data, addr + offset); @@ -414,6 +453,108 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) return hw_ep->musb->io.write_fifo(hw_ep, len, src); } +static u8 musb_read_devctl(struct musb *musb) +{ + return musb_readb(musb->mregs, MUSB_DEVCTL); +} + +/** + * musb_set_host - set and initialize host mode + * @musb: musb controller driver data + * + * At least some musb revisions need to enable devctl session bit in + * peripheral mode to switch to host mode. Initializes things to host + * mode and sets A_IDLE. SoC glue needs to advance state further + * based on phy provided VBUS state. + * + * Note that the SoC glue code may need to wait for musb to settle + * on enable before calling this to avoid babble. + */ +int musb_set_host(struct musb *musb) +{ + int error = 0; + u8 devctl; + + if (!musb) + return -EINVAL; + + devctl = musb_read_devctl(musb); + if (!(devctl & MUSB_DEVCTL_BDEVICE)) { + dev_info(musb->controller, + "%s: already in host mode: %02x\n", + __func__, devctl); + goto init_data; + } + + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + error = readx_poll_timeout(musb_read_devctl, musb, devctl, + !(devctl & MUSB_DEVCTL_BDEVICE), 5000, + 1000000); + if (error) { + dev_err(musb->controller, "%s: could not set host: %02x\n", + __func__, devctl); + + return error; + } + +init_data: + musb->is_active = 1; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + + return error; +} +EXPORT_SYMBOL_GPL(musb_set_host); + +/** + * musb_set_peripheral - set and initialize peripheral mode + * @musb: musb controller driver data + * + * Clears devctl session bit and initializes things for peripheral + * mode and sets B_IDLE. SoC glue needs to advance state further + * based on phy provided VBUS state. + */ +int musb_set_peripheral(struct musb *musb) +{ + int error = 0; + u8 devctl; + + if (!musb) + return -EINVAL; + + devctl = musb_read_devctl(musb); + if (devctl & MUSB_DEVCTL_BDEVICE) { + dev_info(musb->controller, + "%s: already in peripheral mode: %02x\n", + __func__, devctl); + + goto init_data; + } + + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + error = readx_poll_timeout(musb_read_devctl, musb, devctl, + devctl & MUSB_DEVCTL_BDEVICE, 5000, + 1000000); + if (error) { + dev_err(musb->controller, "%s: could not set peripheral: %02x\n", + __func__, devctl); + + return error; + } + +init_data: + musb->is_active = 0; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + + return error; +} +EXPORT_SYMBOL_GPL(musb_set_peripheral); + /*-------------------------------------------------------------------------*/ /* for high speed test mode; see USB 2.0 spec 7.1.20 */ @@ -909,7 +1050,6 @@ static void musb_handle_intr_reset(struct musb *musb) * @param musb instance pointer * @param int_usb register contents * @param devctl - * @param power */ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, @@ -1015,7 +1155,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, static void musb_disable_interrupts(struct musb *musb) { void __iomem *mbase = musb->mregs; - u16 temp; /* disable interrupts */ musb_writeb(mbase, MUSB_INTRUSBE, 0); @@ -1025,9 +1164,9 @@ static void musb_disable_interrupts(struct musb *musb) musb_writew(mbase, MUSB_INTRRXE, 0); /* flush pending interrupts */ - temp = musb_readb(mbase, MUSB_INTRUSB); - temp = musb_readw(mbase, MUSB_INTRTX); - temp = musb_readw(mbase, MUSB_INTRRX); + musb_clearb(mbase, MUSB_INTRUSB); + musb_clearw(mbase, MUSB_INTRTX); + musb_clearw(mbase, MUSB_INTRRX); } static void musb_enable_interrupts(struct musb *musb) @@ -2254,10 +2393,19 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readb = musb->ops->readb; if (musb->ops->writeb) musb_writeb = musb->ops->writeb; + if (musb->ops->clearb) + musb_clearb = musb->ops->clearb; + else + musb_clearb = musb_readb; + if (musb->ops->readw) musb_readw = musb->ops->readw; if (musb->ops->writew) musb_writew = musb->ops->writew; + if (musb->ops->clearw) + musb_clearw = musb->ops->clearw; + else + musb_clearw = musb_readw; #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { @@ -2279,6 +2427,16 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) else musb->io.write_fifo = musb_default_write_fifo; + if (musb->ops->get_toggle) + musb->io.get_toggle = musb->ops->get_toggle; + else + musb->io.get_toggle = musb_default_get_toggle; + + if (musb->ops->set_toggle) + musb->io.set_toggle = musb->ops->set_toggle; + else + musb->io.set_toggle = musb_default_set_toggle; + if (!musb->xceiv->io_ops) { musb->xceiv->io_dev = musb->controller; musb->xceiv->io_priv = musb->mregs; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 04203b7126d5..290a2bc46606 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -27,6 +27,7 @@ struct musb; struct musb_hw_ep; struct musb_ep; +struct musb_qh; /* Helper defines for struct musb->hwvers */ #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) @@ -119,10 +120,14 @@ struct musb_io; * @fifo_offset: returns the fifo offset * @readb: read 8 bits * @writeb: write 8 bits + * @clearb: could be clear-on-readb or W1C * @readw: read 16 bits * @writew: write 16 bits + * @clearw: could be clear-on-readw or W1C * @read_fifo: reads the fifo * @write_fifo: writes to fifo + * @get_toggle: platform specific get toggle function + * @set_toggle: platform specific set toggle function * @dma_init: platform specific dma init function * @dma_exit: platform specific dma exit function * @init: turns on clocks, sets up platform-specific registers, etc @@ -161,12 +166,16 @@ struct musb_platform_ops { u16 fifo_mode; u32 (*fifo_offset)(u8 epnum); u32 (*busctl_offset)(u8 epnum, u16 offset); - u8 (*readb)(const void __iomem *addr, unsigned offset); - void (*writeb)(void __iomem *addr, unsigned offset, u8 data); - u16 (*readw)(const void __iomem *addr, unsigned offset); - void (*writew)(void __iomem *addr, unsigned offset, u16 data); + u8 (*readb)(void __iomem *addr, u32 offset); + void (*writeb)(void __iomem *addr, u32 offset, u8 data); + u8 (*clearb)(void __iomem *addr, u32 offset); + u16 (*readw)(void __iomem *addr, u32 offset); + void (*writew)(void __iomem *addr, u32 offset, u16 data); + u16 (*clearw)(void __iomem *addr, u32 offset); void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); + u16 (*get_toggle)(struct musb_qh *qh, int is_out); + u16 (*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb); struct dma_controller * (*dma_init) (struct musb *musb, void __iomem *base); void (*dma_exit)(struct dma_controller *c); @@ -487,6 +496,9 @@ extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); +extern int musb_set_host(struct musb *musb); +extern int musb_set_peripheral(struct musb *musb); + extern void musb_load_testpacket(struct musb *); extern irqreturn_t musb_interrupt(struct musb *); diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 8f60271c0a9d..4b4d8dc5d3f2 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -35,6 +35,12 @@ struct musb_hw_ep; * whether shared with the Inventra core or separate. */ +#define MUSB_HSDMA_BASE 0x200 +#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) +#define MUSB_HSDMA_CONTROL 0x4 +#define MUSB_HSDMA_ADDRESS 0x8 +#define MUSB_HSDMA_COUNT 0xc + #define DMA_ADDR_INVALID (~(dma_addr_t)0) #ifdef CONFIG_MUSB_PIO_ONLY @@ -191,6 +197,9 @@ extern void (*musb_dma_controller_destroy)(struct dma_controller *); extern struct dma_controller * musbhs_dma_controller_create(struct musb *musb, void __iomem *base); extern void musbhs_dma_controller_destroy(struct dma_controller *c); +extern struct dma_controller * +musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base); +extern irqreturn_t dma_controller_irq(int irq, void *private_data); extern struct dma_controller * tusb_dma_controller_create(struct musb *musb, void __iomem *base); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 5a44b70372d9..886c9b602f8c 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -286,26 +286,6 @@ __acquires(musb->lock) spin_lock(&musb->lock); } -/* For bulk/interrupt endpoints only */ -static inline void musb_save_toggle(struct musb_qh *qh, int is_in, - struct urb *urb) -{ - void __iomem *epio = qh->hw_ep->regs; - u16 csr; - - /* - * FIXME: the current Mentor DMA code seems to have - * problems getting toggle correct. - */ - - if (is_in) - csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; - else - csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; - - usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0); -} - /* * Advance this hardware endpoint's queue, completing the specified URB and * advancing to either the next URB queued to that qh, or else invalidating @@ -320,6 +300,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, struct musb_hw_ep *ep = qh->hw_ep; int ready = qh->is_ready; int status; + u16 toggle; status = (urb->status == -EINPROGRESS) ? 0 : urb->status; @@ -327,7 +308,8 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, switch (qh->type) { case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_INT: - musb_save_toggle(qh, is_in, urb); + toggle = musb->io.get_toggle(qh, !is_in); + usb_settoggle(urb->dev, qh->epnum, !is_in, toggle ? 1 : 0); break; case USB_ENDPOINT_XFER_ISOC: if (status == 0 && urb->error_count) @@ -772,13 +754,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (!hw_ep->tx_double_buffered) { - if (usb_gettoggle(urb->dev, qh->epnum, 1)) - csr |= MUSB_TXCSR_H_WR_DATATOGGLE - | MUSB_TXCSR_H_DATATOGGLE; - else - csr |= MUSB_TXCSR_CLRDATATOG; - } + if (!hw_ep->tx_double_buffered) + csr |= musb->io.set_toggle(qh, is_out, urb); musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ @@ -860,17 +837,12 @@ finish: /* IN/receive */ } else { - u16 csr; + u16 csr = 0; if (hw_ep->rx_reinit) { musb_rx_reinit(musb, qh, epnum); + csr |= musb->io.set_toggle(qh, is_out, urb); - /* init new state: toggle and NYET, maybe DMA later */ - if (usb_gettoggle(urb->dev, qh->epnum, 0)) - csr = MUSB_RXCSR_H_WR_DATATOGGLE - | MUSB_RXCSR_H_DATATOGGLE; - else - csr = 0; if (qh->type == USB_ENDPOINT_XFER_INT) csr |= MUSB_RXCSR_DISNYET; @@ -933,6 +905,7 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, void __iomem *epio = ep->regs; struct musb_qh *cur_qh, *next_qh; u16 rx_csr, tx_csr; + u16 toggle; musb_ep_select(mbase, ep->epnum); if (is_in) { @@ -970,7 +943,8 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, urb->actual_length += dma->actual_len; dma->actual_len = 0L; } - musb_save_toggle(cur_qh, is_in, urb); + toggle = musb->io.get_toggle(cur_qh, !is_in); + usb_settoggle(urb->dev, cur_qh->epnum, !is_in, toggle ? 1 : 0); if (is_in) { /* move cur_qh to end of queue */ diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index 8058a58092cf..f17aabd95a50 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -22,6 +22,8 @@ * @read_fifo: platform specific function to read fifo * @write_fifo: platform specific function to write fifo * @busctl_offset: platform specific function to get busctl offset + * @get_toggle: platform specific function to get toggle + * @set_toggle: platform specific function to set toggle */ struct musb_io { u32 (*ep_offset)(u8 epnum, u16 offset); @@ -30,14 +32,18 @@ struct musb_io { void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); u32 (*busctl_offset)(u8 epnum, u16 offset); + u16 (*get_toggle)(struct musb_qh *qh, int is_out); + u16 (*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb); }; /* Do not add new entries here, add them the struct musb_io instead */ -extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset); -extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); -extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset); -extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); -extern u32 musb_readl(const void __iomem *addr, unsigned offset); -extern void musb_writel(void __iomem *addr, unsigned offset, u32 data); +extern u8 (*musb_readb)(void __iomem *addr, u32 offset); +extern void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data); +extern u8 (*musb_clearb)(void __iomem *addr, u32 offset); +extern u16 (*musb_readw)(void __iomem *addr, u32 offset); +extern void (*musb_writew)(void __iomem *addr, u32 offset, u16 data); +extern u16 (*musb_clearw)(void __iomem *addr, u32 offset); +extern u32 musb_readl(void __iomem *addr, u32 offset); +extern void musb_writel(void __iomem *addr, u32 offset, u32 data); #endif diff --git a/drivers/usb/musb/musb_trace.h b/drivers/usb/musb/musb_trace.h index a97d618fe8ff..b193daf69685 100644 --- a/drivers/usb/musb/musb_trace.h +++ b/drivers/usb/musb/musb_trace.h @@ -38,11 +38,12 @@ TRACE_EVENT(musb_log, ); DECLARE_EVENT_CLASS(musb_regb, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u8 data), TP_ARGS(caller, addr, offset, data), TP_STRUCT__entry( __field(void *, caller) - __field(const void *, addr) + __field(const void __iomem *, addr) __field(unsigned int, offset) __field(u8, data) ), @@ -57,21 +58,24 @@ DECLARE_EVENT_CLASS(musb_regb, ); DEFINE_EVENT(musb_regb, musb_readb, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u8 data), TP_ARGS(caller, addr, offset, data) ); DEFINE_EVENT(musb_regb, musb_writeb, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u8 data), TP_ARGS(caller, addr, offset, data) ); DECLARE_EVENT_CLASS(musb_regw, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u16 data), TP_ARGS(caller, addr, offset, data), TP_STRUCT__entry( __field(void *, caller) - __field(const void *, addr) + __field(const void __iomem *, addr) __field(unsigned int, offset) __field(u16, data) ), @@ -86,21 +90,24 @@ DECLARE_EVENT_CLASS(musb_regw, ); DEFINE_EVENT(musb_regw, musb_readw, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u16 data), TP_ARGS(caller, addr, offset, data) ); DEFINE_EVENT(musb_regw, musb_writew, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u16 data), TP_ARGS(caller, addr, offset, data) ); DECLARE_EVENT_CLASS(musb_regl, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u32 data), TP_ARGS(caller, addr, offset, data), TP_STRUCT__entry( __field(void *, caller) - __field(const void *, addr) + __field(const void __iomem *, addr) __field(unsigned int, offset) __field(u32, data) ), @@ -115,12 +122,14 @@ DECLARE_EVENT_CLASS(musb_regl, ); DEFINE_EVENT(musb_regl, musb_readl, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u32 data), TP_ARGS(caller, addr, offset, data) ); DEFINE_EVENT(musb_regl, musb_writel, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u32 data), TP_ARGS(caller, addr, offset, data) ); diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 2d3751d885b4..0aacfc8be5a1 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -10,12 +10,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include "musb_core.h" - -#define MUSB_HSDMA_BASE 0x200 -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) -#define MUSB_HSDMA_CONTROL 0x4 -#define MUSB_HSDMA_ADDRESS 0x8 -#define MUSB_HSDMA_COUNT 0xc +#include "musb_dma.h" #define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset) @@ -268,7 +263,7 @@ static int dma_channel_abort(struct dma_channel *channel) return 0; } -static irqreturn_t dma_controller_irq(int irq, void *private_data) +irqreturn_t dma_controller_irq(int irq, void *private_data) { struct musb_dma_controller *controller = private_data; struct musb *musb = controller->private_data; @@ -289,7 +284,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) spin_lock_irqsave(&musb->lock, flags); - int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); + int_hsdma = musb_clearb(mbase, MUSB_HSDMA_INTR); if (!int_hsdma) { musb_dbg(musb, "spurious DMA irq"); @@ -383,6 +378,7 @@ done: spin_unlock_irqrestore(&musb->lock, flags); return retval; } +EXPORT_SYMBOL_GPL(dma_controller_irq); void musbhs_dma_controller_destroy(struct dma_controller *c) { @@ -398,18 +394,10 @@ void musbhs_dma_controller_destroy(struct dma_controller *c) } EXPORT_SYMBOL_GPL(musbhs_dma_controller_destroy); -struct dma_controller *musbhs_dma_controller_create(struct musb *musb, - void __iomem *base) +static struct musb_dma_controller * +dma_controller_alloc(struct musb *musb, void __iomem *base) { struct musb_dma_controller *controller; - struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev); - int irq = platform_get_irq_byname(pdev, "dma"); - - if (irq <= 0) { - dev_err(dev, "No DMA interrupt line!\n"); - return NULL; - } controller = kzalloc(sizeof(*controller), GFP_KERNEL); if (!controller) @@ -423,6 +411,25 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb, controller->controller.channel_release = dma_channel_release; controller->controller.channel_program = dma_channel_program; controller->controller.channel_abort = dma_channel_abort; + return controller; +} + +struct dma_controller * +musbhs_dma_controller_create(struct musb *musb, void __iomem *base) +{ + struct musb_dma_controller *controller; + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev); + int irq = platform_get_irq_byname(pdev, "dma"); + + if (irq <= 0) { + dev_err(dev, "No DMA interrupt line!\n"); + return NULL; + } + + controller = dma_controller_alloc(musb, base); + if (!controller) + return NULL; if (request_irq(irq, dma_controller_irq, 0, dev_name(musb->controller), controller)) { @@ -437,3 +444,16 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb, return &controller->controller; } EXPORT_SYMBOL_GPL(musbhs_dma_controller_create); + +struct dma_controller * +musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base) +{ + struct musb_dma_controller *controller; + + controller = dma_controller_alloc(musb, base); + if (!controller) + return NULL; + + return &controller->controller; +} +EXPORT_SYMBOL_GPL(musbhs_dma_controller_create_noirq); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3d2fef67746..d62c78b97cad 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -38,69 +38,6 @@ struct omap2430_glue { static struct omap2430_glue *_glue; -static void omap2430_musb_set_vbus(struct musb *musb, int is_on) -{ - struct usb_otg *otg = musb->xceiv->otg; - u8 devctl; - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - /* HDRC controls CPEN, but beware current surges during device - * connect. They can trigger transient overcurrent conditions - * that must be ignored. - */ - - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - - if (is_on) { - if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { - int loops = 100; - /* start the session */ - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - /* - * Wait for the musb to set as A device to enable the - * VBUS - */ - while (musb_readb(musb->mregs, MUSB_DEVCTL) & - MUSB_DEVCTL_BDEVICE) { - - mdelay(5); - cpu_relax(); - - if (time_after(jiffies, timeout) - || loops-- <= 0) { - dev_err(musb->controller, - "configured as A device timeout"); - break; - } - } - - otg_set_vbus(otg, 1); - } else { - musb->is_active = 1; - musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; - devctl |= MUSB_DEVCTL_SESSION; - MUSB_HST_MODE(musb); - } - } else { - musb->is_active = 0; - - /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and - * jumping right to B_IDLE... - */ - - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - devctl &= ~MUSB_DEVCTL_SESSION; - - MUSB_DEV_MODE(musb); - } - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - - dev_dbg(musb->controller, "VBUS %s, devctl %02x " - /* otg %3x conf %08x prcm %08x */ "\n", - usb_otg_state_string(musb->xceiv->otg->state), - musb_readb(musb->mregs, MUSB_DEVCTL)); -} - static inline void omap2430_low_level_exit(struct musb *musb) { u32 l; @@ -140,24 +77,52 @@ static int omap2430_musb_mailbox(enum musb_vbus_id_status status) return 0; } +/* + * HDRC controls CPEN, but beware current surges during device connect. + * They can trigger transient overcurrent conditions that must be ignored. + * + * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE + * as set by musb_set_peripheral(). + */ static void omap_musb_set_mailbox(struct omap2430_glue *glue) { struct musb *musb = glue_to_musb(glue); - struct musb_hdrc_platform_data *pdata = - dev_get_platdata(musb->controller); - struct omap_musb_board_data *data = pdata->board_data; + int error; pm_runtime_get_sync(musb->controller); + + dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", + usb_otg_state_string(musb->xceiv->otg->state), + musb_readb(musb->mregs, MUSB_DEVCTL)); + switch (glue->status) { case MUSB_ID_GROUND: dev_dbg(musb->controller, "ID GND\n"); - - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - musb->xceiv->last_event = USB_EVENT_ID; - if (musb->gadget_driver) { - omap_control_usb_set_mode(glue->control_otghs, - USB_MODE_HOST); - omap2430_musb_set_vbus(musb, 1); + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_IDLE: + error = musb_set_host(musb); + if (error) + break; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + /* Fall through */ + case OTG_STATE_A_WAIT_VRISE: + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_HOST: + /* + * On multiple ID ground interrupts just keep enabling + * VBUS. At least cpcap VBUS shuts down otherwise. + */ + otg_set_vbus(musb->xceiv->otg, 1); + break; + default: + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + musb->xceiv->last_event = USB_EVENT_ID; + if (musb->gadget_driver) { + omap_control_usb_set_mode(glue->control_otghs, + USB_MODE_HOST); + otg_set_vbus(musb->xceiv->otg, 1); + } + break; } break; @@ -174,12 +139,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(musb->controller, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (musb->gadget_driver) - omap2430_musb_set_vbus(musb, 0); - - if (data->interface_type == MUSB_INTERFACE_UTMI) - otg_set_vbus(musb->xceiv->otg, 0); - + musb_set_peripheral(musb); + otg_set_vbus(musb->xceiv->otg, 0); omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); break; @@ -226,7 +187,6 @@ static int omap2430_musb_init(struct musb *musb) u32 l; int status = 0; struct device *dev = musb->controller; - struct omap2430_glue *glue = dev_get_drvdata(dev->parent); struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); struct omap_musb_board_data *data = plat->board_data; @@ -282,50 +242,17 @@ static int omap2430_musb_init(struct musb *musb) musb_readl(musb->mregs, OTG_INTERFSEL), musb_readl(musb->mregs, OTG_SIMENABLE)); - if (glue->status != MUSB_UNKNOWN) - omap_musb_set_mailbox(glue); - return 0; } static void omap2430_musb_enable(struct musb *musb) { - u8 devctl; - unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); - struct omap_musb_board_data *data = pdata->board_data; - - - switch (glue->status) { - - case MUSB_ID_GROUND: - omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); - if (data->interface_type != MUSB_INTERFACE_UTMI) - break; - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - /* start the session */ - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - while (musb_readb(musb->mregs, MUSB_DEVCTL) & - MUSB_DEVCTL_BDEVICE) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_err(dev, "configured as A device timeout"); - break; - } - } - break; - case MUSB_VBUS_VALID: - omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); - break; - - default: - break; - } + if (glue->status == MUSB_UNKNOWN) + glue->status = MUSB_VBUS_OFF; + omap_musb_set_mailbox(glue); } static void omap2430_musb_disable(struct musb *musb) @@ -361,8 +288,6 @@ static const struct musb_platform_ops omap2430_ops = { .init = omap2430_musb_init, .exit = omap2430_musb_exit, - .set_vbus = omap2430_musb_set_vbus, - .enable = omap2430_musb_enable, .disable = omap2430_musb_disable, @@ -552,6 +477,9 @@ static int omap2430_runtime_resume(struct device *dev) musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); + /* Wait for musb to get oriented. Otherwise we can get babble */ + usleep_range(200000, 250000); + return 0; } diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 832a41f9ee7d..f3f76f2ac63f 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -407,7 +407,7 @@ static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) return SUNXI_MUSB_TXFUNCADDR + offset; } -static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset) +static u8 sunxi_musb_readb(void __iomem *addr, u32 offset) { struct sunxi_glue *glue; @@ -520,7 +520,7 @@ static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) (int)(addr - sunxi_musb->mregs)); } -static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset) +static u16 sunxi_musb_readw(void __iomem *addr, u32 offset) { if (addr == sunxi_musb->mregs) { /* generic control or fifo control reg access */ @@ -781,6 +781,8 @@ static int sunxi_musb_probe(struct platform_device *pdev) pinfo.name = "musb-hdrc"; pinfo.id = PLATFORM_DEVID_AUTO; pinfo.parent = &pdev->dev; + pinfo.fwnode = of_fwnode_handle(pdev->dev.of_node); + pinfo.of_node_reused = true; pinfo.res = pdev->resource; pinfo.num_res = pdev->num_resources; pinfo.data = &pdata; diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 39453287b5c3..5d449089e3ad 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -142,7 +142,7 @@ static void tusb_ep_select(void __iomem *mbase, u8 epnum) /* * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum. */ -static u8 tusb_readb(const void __iomem *addr, unsigned offset) +static u8 tusb_readb(void __iomem *addr, u32 offset) { u16 tmp; u8 val; diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index d19bb3e89da6..d5cf5e8bb1ca 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -310,9 +310,9 @@ static int ux500_dma_controller_start(struct ux500_dma_controller *controller) dma_channel->max_len = SZ_16M; ux500_channel->dma_chan = - dma_request_slave_channel(dev, chan_names[ch_num]); + dma_request_chan(dev, chan_names[ch_num]); - if (!ux500_channel->dma_chan) + if (IS_ERR(ux500_channel->dma_chan)) ux500_channel->dma_chan = dma_request_channel(mask, data ? diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 24b4f091acb8..ff24fca0a2d9 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -162,7 +162,7 @@ config USB_MXS_PHY config USB_TEGRA_PHY tristate "NVIDIA Tegra USB PHY Driver" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST select USB_COMMON select USB_PHY select USB_ULPI @@ -172,7 +172,7 @@ config USB_TEGRA_PHY config USB_ULPI bool "Generic ULPI Transceiver Driver" - depends on ARM || ARM64 + depends on ARM || ARM64 || COMPILE_TEST select USB_ULPI_VIEWPORT help Enable this to support ULPI connected USB OTG transceivers which diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 4bb4b1d42f32..20c0f082bf9c 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -108,7 +108,8 @@ enum ab8500_usb_mode { USB_IDLE = 0, USB_PERIPHERAL, USB_HOST, - USB_DEDICATED_CHG + USB_DEDICATED_CHG, + USB_UART }; /* Register USB_LINK_STATUS interrupt */ @@ -393,6 +394,24 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER); break; + /* + * FIXME: For now we rely on the boot firmware to set up the necessary + * PHY/pin configuration for UART mode. + * + * AB8505 does not seem to report any status change for UART cables, + * possibly because it cannot detect them autonomously. + * We may need to measure the ID resistance manually to reliably + * detect UART cables after bootup. + */ + case USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505: + case USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505: + if (ab->mode == USB_IDLE) { + ab->mode = USB_UART; + ab8500_usb_peri_phy_en(ab); + } + + break; + default: break; } @@ -566,6 +585,11 @@ static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data) ab->vbus_draw = 0; } + if (ab->mode == USB_UART) { + ab8500_usb_peri_phy_dis(ab); + ab->mode = USB_IDLE; + } + if (is_ab8500_2p0(ab->ab8500)) { if (ab->mode == USB_DEDICATED_CHG) { ab8500_usb_wd_linkstatus(ab, diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index f5f0568d8533..8524475d942d 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -57,7 +57,7 @@ static int am335x_phy_probe(struct platform_device *pdev) am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1); - ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL); + ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen); if (ret) return ret; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index a53b89be5324..661a229c105d 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -21,8 +21,7 @@ #include <linux/clk.h> #include <linux/regulator/consumer.h> #include <linux/of.h> -#include <linux/of_gpio.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include "phy-generic.h" @@ -204,8 +203,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) return 0; } -int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, - struct usb_phy_generic_platform_data *pdata) +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) { enum usb_phy_type type = USB_PHY_TYPE_USB2; int err = 0; @@ -221,28 +219,15 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, needs_vcc = of_property_read_bool(node, "vcc-supply"); needs_clk = of_property_read_bool(node, "clocks"); - nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", - GPIOD_ASIS); - err = PTR_ERR_OR_ZERO(nop->gpiod_reset); - if (!err) { - nop->gpiod_vbus = devm_gpiod_get_optional(dev, - "vbus-detect", - GPIOD_ASIS); - err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); - } - } else if (pdata) { - type = pdata->type; - clk_rate = pdata->clk_rate; - needs_vcc = pdata->needs_vcc; - if (gpio_is_valid(pdata->gpio_reset)) { - err = devm_gpio_request_one(dev, pdata->gpio_reset, - GPIOF_ACTIVE_LOW, - dev_name(dev)); - if (!err) - nop->gpiod_reset = - gpio_to_desc(pdata->gpio_reset); - } - nop->gpiod_vbus = pdata->gpiod_vbus; + } + nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", + GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(nop->gpiod_reset); + if (!err) { + nop->gpiod_vbus = devm_gpiod_get_optional(dev, + "vbus-detect", + GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); } if (err == -EPROBE_DEFER) @@ -308,7 +293,7 @@ static int usb_phy_generic_probe(struct platform_device *pdev) if (!nop) return -ENOMEM; - err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); + err = usb_phy_gen_create_phy(dev, nop); if (err) return err; if (nop->gpiod_vbus) { diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index 97289627561d..7ee80211a688 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -22,7 +22,6 @@ struct usb_phy_generic { int usb_gen_phy_init(struct usb_phy *phy); void usb_gen_phy_shutdown(struct usb_phy *phy); -int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, - struct usb_phy_generic_platform_data *pdata); +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop); #endif diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 553e2573c74f..f13f5530746c 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -7,7 +7,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/interrupt.h> @@ -17,7 +17,6 @@ #include <linux/regulator/consumer.h> #include <linux/usb/gadget.h> -#include <linux/usb/gpio_vbus.h> #include <linux/usb/otg.h> @@ -29,6 +28,8 @@ * Needs to be loaded before the UDC driver that will use it. */ struct gpio_vbus_data { + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; struct usb_phy phy; struct device *dev; struct regulator *vbus_draw; @@ -83,38 +84,30 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) gpio_vbus->mA = mA; } -static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) +static int is_vbus_powered(struct gpio_vbus_data *gpio_vbus) { - int vbus; - - vbus = gpio_get_value(pdata->gpio_vbus); - if (pdata->gpio_vbus_inverted) - vbus = !vbus; - - return vbus; + return gpiod_get_value(gpio_vbus->vbus_gpiod); } static void gpio_vbus_work(struct work_struct *work) { struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work.work); - struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev); - int gpio, status, vbus; + int status, vbus; if (!gpio_vbus->phy.otg->gadget) return; - vbus = is_vbus_powered(pdata); + vbus = is_vbus_powered(gpio_vbus); if ((vbus ^ gpio_vbus->vbus) == 0) return; gpio_vbus->vbus = vbus; /* Peripheral controllers which manage the pullup themselves won't have - * gpio_pullup configured here. If it's configured here, we'll do what - * isp1301_omap::b_peripheral() does and enable the pullup here... although - * that may complicate usb_gadget_{,dis}connect() support. + * a pullup GPIO configured here. If it's configured here, we'll do + * what isp1301_omap::b_peripheral() does and enable the pullup here... + * although that may complicate usb_gadget_{,dis}connect() support. */ - gpio = pdata->gpio_pullup; if (vbus) { status = USB_EVENT_VBUS; @@ -126,16 +119,16 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 100); /* optionally enable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + if (gpio_vbus->pullup_gpiod) + gpiod_set_value(gpio_vbus->pullup_gpiod, 1); atomic_notifier_call_chain(&gpio_vbus->phy.notifier, status, gpio_vbus->phy.otg->gadget); usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED); } else { /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); + if (gpio_vbus->pullup_gpiod) + gpiod_set_value(gpio_vbus->pullup_gpiod, 0); set_vbus_draw(gpio_vbus, 0); @@ -154,12 +147,11 @@ static void gpio_vbus_work(struct work_struct *work) static irqreturn_t gpio_vbus_irq(int irq, void *data) { struct platform_device *pdev = data; - struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); struct usb_otg *otg = gpio_vbus->phy.otg; dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", - is_vbus_powered(pdata) ? "supplied" : "inactive", + is_vbus_powered(gpio_vbus) ? "supplied" : "inactive", otg->gadget ? otg->gadget->name : "none"); if (otg->gadget) @@ -175,22 +167,18 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { struct gpio_vbus_data *gpio_vbus; - struct gpio_vbus_mach_info *pdata; struct platform_device *pdev; - int gpio; gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy); pdev = to_platform_device(gpio_vbus->dev); - pdata = dev_get_platdata(gpio_vbus->dev); - gpio = pdata->gpio_pullup; if (!gadget) { dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", otg->gadget->name); /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); + if (gpio_vbus->pullup_gpiod) + gpiod_set_value(gpio_vbus->pullup_gpiod, 0); set_vbus_draw(gpio_vbus, 0); @@ -242,16 +230,12 @@ static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) static int gpio_vbus_probe(struct platform_device *pdev) { - struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus; struct resource *res; - int err, gpio, irq; + struct device *dev = &pdev->dev; + int err, irq; unsigned long irqflags; - if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) - return -EINVAL; - gpio = pdata->gpio_vbus; - gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data), GFP_KERNEL); if (!gpio_vbus) @@ -273,37 +257,43 @@ static int gpio_vbus_probe(struct platform_device *pdev) gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy; gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; - err = devm_gpio_request(&pdev->dev, gpio, "vbus_detect"); - if (err) { - dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", - gpio, err); + /* Look up the VBUS sensing GPIO */ + gpio_vbus->vbus_gpiod = devm_gpiod_get(dev, "vbus", GPIOD_IN); + if (IS_ERR(gpio_vbus->vbus_gpiod)) { + err = PTR_ERR(gpio_vbus->vbus_gpiod); + dev_err(&pdev->dev, "can't request vbus gpio, err: %d\n", err); return err; } - gpio_direction_input(gpio); + gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect"); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res) { irq = res->start; irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; } else { - irq = gpio_to_irq(gpio); + irq = gpiod_to_irq(gpio_vbus->vbus_gpiod); irqflags = VBUS_IRQ_FLAGS; } gpio_vbus->irq = irq; - /* if data line pullup is in use, initialize it to "not pulling up" */ - gpio = pdata->gpio_pullup; - if (gpio_is_valid(gpio)) { - err = devm_gpio_request(&pdev->dev, gpio, "udc_pullup"); - if (err) { - dev_err(&pdev->dev, - "can't request pullup gpio %d, err: %d\n", - gpio, err); - return err; - } - gpio_direction_output(gpio, pdata->gpio_pullup_inverted); + /* + * The VBUS sensing GPIO should have a pulldown, which will normally be + * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a + * value the GPIO detects as active. Some systems will use comparators. + * Get the optional D+ or D- pullup GPIO. If the data line pullup is + * in use, initialize it to "not pulling up" + */ + gpio_vbus->pullup_gpiod = devm_gpiod_get_optional(dev, "pullup", + GPIOD_OUT_LOW); + if (IS_ERR(gpio_vbus->pullup_gpiod)) { + err = PTR_ERR(gpio_vbus->pullup_gpiod); + dev_err(&pdev->dev, "can't request pullup gpio, err: %d\n", + err); + return err; } + if (gpio_vbus->pullup_gpiod) + gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup"); err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev); @@ -330,7 +320,7 @@ static int gpio_vbus_probe(struct platform_device *pdev) return err; } - device_init_wakeup(&pdev->dev, pdata->wakeup); + /* TODO: wakeup could be enabled here with device_init_wakeup(dev, 1) */ return 0; } diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c index 110e6e9ad621..9c226b57153b 100644 --- a/drivers/usb/phy/phy-keystone.c +++ b/drivers/usb/phy/phy-keystone.c @@ -76,7 +76,7 @@ static int keystone_usbphy_probe(struct platform_device *pdev) if (IS_ERR(k_phy->phy_ctrl)) return PTR_ERR(k_phy->phy_ctrl); - ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen, NULL); + ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen); if (ret) return ret; diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index ea7ef1dc0b42..037e8eee737d 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -9,54 +9,56 @@ * Venu Byravarasu <vbyravarasu@nvidia.com> */ -#include <linux/resource.h> #include <linux/delay.h> -#include <linux/slab.h> #include <linux/err.h> #include <linux/export.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/iopoll.h> #include <linux/gpio.h> +#include <linux/iopoll.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/usb/of.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include <linux/regulator/consumer.h> + #include <linux/usb/ehci_def.h> +#include <linux/usb/of.h> #include <linux/usb/tegra_usb_phy.h> -#include <linux/regulator/consumer.h> +#include <linux/usb/ulpi.h> -#define ULPI_VIEWPORT 0x170 +#define ULPI_VIEWPORT 0x170 /* PORTSC PTS/PHCD bits, Tegra20 only */ -#define TEGRA_USB_PORTSC1 0x184 -#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) -#define TEGRA_USB_PORTSC1_PHCD (1 << 23) +#define TEGRA_USB_PORTSC1 0x184 +#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define TEGRA_USB_PORTSC1_PHCD BIT(23) /* HOSTPC1 PTS/PHCD bits, Tegra30 and above */ -#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 -#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) -#define TEGRA_USB_HOSTPC1_DEVLC_PHCD (1 << 22) +#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 +#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) +#define TEGRA_USB_HOSTPC1_DEVLC_PHCD BIT(22) /* Bits of PORTSC1, which will get cleared by writing 1 into them */ #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -#define USB_SUSP_CTRL 0x400 -#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) -#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) -#define USB_SUSP_CLR (1 << 5) -#define USB_PHY_CLK_VALID (1 << 7) -#define UTMIP_RESET (1 << 11) -#define UHSIC_RESET (1 << 11) -#define UTMIP_PHY_ENABLE (1 << 12) -#define ULPI_PHY_ENABLE (1 << 13) -#define USB_SUSP_SET (1 << 14) -#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) - -#define USB1_LEGACY_CTRL 0x410 -#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV BIT(3) +#define USB_WAKE_ON_DISCON_EN_DEV BIT(4) +#define USB_SUSP_CLR BIT(5) +#define USB_PHY_CLK_VALID BIT(7) +#define UTMIP_RESET BIT(11) +#define UHSIC_RESET BIT(11) +#define UTMIP_PHY_ENABLE BIT(12) +#define ULPI_PHY_ENABLE BIT(13) +#define USB_SUSP_SET BIT(14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE BIT(0) #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ @@ -64,94 +66,94 @@ #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) -#define ULPI_TIMING_CTRL_0 0x424 -#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) -#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP BIT(10) +#define ULPI_CLKOUT_PINMUX_BYP BIT(11) -#define ULPI_TIMING_CTRL_1 0x428 -#define ULPI_DATA_TRIMMER_LOAD (1 << 0) -#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) -#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) -#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) -#define ULPI_DIR_TRIMMER_LOAD (1 << 24) -#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD BIT(0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD BIT(16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD BIT(24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) -#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_PLL_CFG1 0x804 #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) -#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_CFG0 0x808 #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) #define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x70) >> 4) << 22) #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) -#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) -#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) -#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) -#define UTMIP_XCVR_LSBIAS_SEL (1 << 21) +#define UTMIP_FORCE_PD_POWERDOWN BIT(14) +#define UTMIP_FORCE_PD2_POWERDOWN BIT(16) +#define UTMIP_FORCE_PDZI_POWERDOWN BIT(18) +#define UTMIP_XCVR_LSBIAS_SEL BIT(21) #define UTMIP_XCVR_HSSLEW(x) (((x) & 0x3) << 4) #define UTMIP_XCVR_HSSLEW_MSB(x) ((((x) & 0x1fc) >> 2) << 25) -#define UTMIP_BIAS_CFG0 0x80c -#define UTMIP_OTGPD (1 << 11) -#define UTMIP_BIASPD (1 << 10) -#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) -#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) -#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD BIT(11) +#define UTMIP_BIASPD BIT(10) +#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) +#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) +#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) -#define UTMIP_HSRX_CFG0 0x810 -#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) -#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) -#define UTMIP_HSRX_CFG1 0x814 -#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) -#define UTMIP_TX_CFG0 0x820 -#define UTMIP_FS_PREABMLE_J (1 << 19) -#define UTMIP_HS_DISCON_DISABLE (1 << 8) +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J BIT(19) +#define UTMIP_HS_DISCON_DISABLE BIT(8) -#define UTMIP_MISC_CFG0 0x824 -#define UTMIP_DPDM_OBSERVE (1 << 26) -#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) -#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) -#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) -#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE BIT(26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE BIT(22) -#define UTMIP_MISC_CFG1 0x828 -#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) -#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) -#define UTMIP_DEBOUNCE_CFG0 0x82c -#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) -#define UTMIP_BAT_CHRG_CFG0 0x830 -#define UTMIP_PD_CHRG (1 << 0) +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG BIT(0) -#define UTMIP_SPARE_CFG0 0x834 -#define FUSE_SETUP_SEL (1 << 3) +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL BIT(3) -#define UTMIP_XCVR_CFG1 0x838 -#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) -#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) -#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) -#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN BIT(0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN BIT(2) +#define UTMIP_FORCE_PDDR_POWERDOWN BIT(4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) -#define UTMIP_BIAS_CFG1 0x83c -#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) /* For Tegra30 and above only, the address is different in Tegra20 */ -#define USB_USBMODE 0x1f8 -#define USB_USBMODE_MASK (3 << 0) -#define USB_USBMODE_HOST (3 << 0) -#define USB_USBMODE_DEVICE (2 << 0) +#define USB_USBMODE 0x1f8 +#define USB_USBMODE_MASK (3 << 0) +#define USB_USBMODE_HOST (3 << 0) +#define USB_USBMODE_DEVICE (2 << 0) static DEFINE_SPINLOCK(utmip_pad_lock); -static int utmip_pad_count; +static unsigned int utmip_pad_count; struct tegra_xtal_freq { - int freq; + unsigned int freq; u8 enable_delay; u8 stable_count; u8 active_delay; @@ -194,43 +196,49 @@ static const struct tegra_xtal_freq tegra_freq_table[] = { }, }; +static inline struct tegra_usb_phy *to_tegra_usb_phy(struct usb_phy *u_phy) +{ + return container_of(u_phy, struct tegra_usb_phy, u_phy); +} + static void set_pts(struct tegra_usb_phy *phy, u8 pts_val) { void __iomem *base = phy->regs; - unsigned long val; + u32 val; if (phy->soc_config->has_hostpc) { - val = readl(base + TEGRA_USB_HOSTPC1_DEVLC); + val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC); val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0); val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val); - writel(val, base + TEGRA_USB_HOSTPC1_DEVLC); + writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC); } else { - val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS; + val = readl_relaxed(base + TEGRA_USB_PORTSC1); + val &= ~TEGRA_PORTSC1_RWC_BITS; val &= ~TEGRA_USB_PORTSC1_PTS(~0); val |= TEGRA_USB_PORTSC1_PTS(pts_val); - writel(val, base + TEGRA_USB_PORTSC1); + writel_relaxed(val, base + TEGRA_USB_PORTSC1); } } static void set_phcd(struct tegra_usb_phy *phy, bool enable) { void __iomem *base = phy->regs; - unsigned long val; + u32 val; if (phy->soc_config->has_hostpc) { - val = readl(base + TEGRA_USB_HOSTPC1_DEVLC); + val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC); if (enable) val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD; else val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD; - writel(val, base + TEGRA_USB_HOSTPC1_DEVLC); + writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC); } else { - val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS; + val = readl_relaxed(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS; if (enable) val |= TEGRA_USB_PORTSC1_PHCD; else val &= ~TEGRA_USB_PORTSC1_PHCD; - writel(val, base + TEGRA_USB_PORTSC1); + writel_relaxed(val, base + TEGRA_USB_PORTSC1); } } @@ -238,23 +246,6 @@ static int utmip_pad_open(struct tegra_usb_phy *phy) { int ret; - phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads"); - if (IS_ERR(phy->pad_clk)) { - ret = PTR_ERR(phy->pad_clk); - dev_err(phy->u_phy.dev, - "Failed to get UTMIP pad clock: %d\n", ret); - return ret; - } - - phy->pad_rst = devm_reset_control_get_optional_shared( - phy->u_phy.dev, "utmi-pads"); - if (IS_ERR(phy->pad_rst)) { - ret = PTR_ERR(phy->pad_rst); - dev_err(phy->u_phy.dev, - "Failed to get UTMI-pads reset: %d\n", ret); - return ret; - } - ret = clk_prepare_enable(phy->pad_clk); if (ret) { dev_err(phy->u_phy.dev, @@ -315,18 +306,21 @@ static int utmip_pad_close(struct tegra_usb_phy *phy) return ret; } -static void utmip_pad_power_on(struct tegra_usb_phy *phy) +static int utmip_pad_power_on(struct tegra_usb_phy *phy) { - unsigned long val, flags; - void __iomem *base = phy->pad_regs; struct tegra_utmip_config *config = phy->config; + void __iomem *base = phy->pad_regs; + u32 val; + int err; - clk_prepare_enable(phy->pad_clk); + err = clk_prepare_enable(phy->pad_clk); + if (err) + return err; - spin_lock_irqsave(&utmip_pad_lock, flags); + spin_lock(&utmip_pad_lock); if (utmip_pad_count++ == 0) { - val = readl(base + UTMIP_BIAS_CFG0); + val = readl_relaxed(base + UTMIP_BIAS_CFG0); val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); if (phy->soc_config->requires_extra_tuning_parameters) { @@ -338,53 +332,59 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy) val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level); val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level); } - writel(val, base + UTMIP_BIAS_CFG0); + writel_relaxed(val, base + UTMIP_BIAS_CFG0); } - spin_unlock_irqrestore(&utmip_pad_lock, flags); + spin_unlock(&utmip_pad_lock); clk_disable_unprepare(phy->pad_clk); + + return 0; } static int utmip_pad_power_off(struct tegra_usb_phy *phy) { - unsigned long val, flags; void __iomem *base = phy->pad_regs; + u32 val; + int ret; + + ret = clk_prepare_enable(phy->pad_clk); + if (ret) + return ret; + + spin_lock(&utmip_pad_lock); if (!utmip_pad_count) { dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n"); - return -EINVAL; + ret = -EINVAL; + goto ulock; } - clk_prepare_enable(phy->pad_clk); - - spin_lock_irqsave(&utmip_pad_lock, flags); - if (--utmip_pad_count == 0) { - val = readl(base + UTMIP_BIAS_CFG0); + val = readl_relaxed(base + UTMIP_BIAS_CFG0); val |= UTMIP_OTGPD | UTMIP_BIASPD; - writel(val, base + UTMIP_BIAS_CFG0); + writel_relaxed(val, base + UTMIP_BIAS_CFG0); } - - spin_unlock_irqrestore(&utmip_pad_lock, flags); +ulock: + spin_unlock(&utmip_pad_lock); clk_disable_unprepare(phy->pad_clk); - return 0; + return ret; } static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) { u32 tmp; - return readl_poll_timeout(reg, tmp, (tmp & mask) == result, - 2000, 6000); + return readl_relaxed_poll_timeout(reg, tmp, (tmp & mask) == result, + 2000, 6000); } static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; /* * The USB driver may have already initiated the phy clock @@ -395,27 +395,28 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) return; if (phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - udelay(10); + usleep_range(10, 100); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); - } else + writel_relaxed(val, base + USB_SUSP_CTRL); + } else { set_phcd(phy, true); + } - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0)) dev_err(phy->u_phy.dev, "Timeout waiting for PHY to stabilize on disable\n"); } static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; /* * The USB driver may have already initiated the phy clock @@ -427,97 +428,101 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) return; if (phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - udelay(10); + usleep_range(10, 100); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - } else + writel_relaxed(val, base + USB_SUSP_CTRL); + } else { set_phcd(phy, false); + } if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, - USB_PHY_CLK_VALID)) + USB_PHY_CLK_VALID)) dev_err(phy->u_phy.dev, "Timeout waiting for PHY to stabilize on enable\n"); } static int utmi_phy_power_on(struct tegra_usb_phy *phy) { - unsigned long val; - void __iomem *base = phy->regs; struct tegra_utmip_config *config = phy->config; + void __iomem *base = phy->regs; + u32 val; + int err; - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); if (phy->is_legacy_phy) { - val = readl(base + USB1_LEGACY_CTRL); + val = readl_relaxed(base + USB1_LEGACY_CTRL); val |= USB1_NO_LEGACY_MODE; - writel(val, base + USB1_LEGACY_CTRL); + writel_relaxed(val, base + USB1_LEGACY_CTRL); } - val = readl(base + UTMIP_TX_CFG0); + val = readl_relaxed(base + UTMIP_TX_CFG0); val |= UTMIP_FS_PREABMLE_J; - writel(val, base + UTMIP_TX_CFG0); + writel_relaxed(val, base + UTMIP_TX_CFG0); - val = readl(base + UTMIP_HSRX_CFG0); + val = readl_relaxed(base + UTMIP_HSRX_CFG0); val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); - writel(val, base + UTMIP_HSRX_CFG0); + writel_relaxed(val, base + UTMIP_HSRX_CFG0); - val = readl(base + UTMIP_HSRX_CFG1); + val = readl_relaxed(base + UTMIP_HSRX_CFG1); val &= ~UTMIP_HS_SYNC_START_DLY(~0); val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); - writel(val, base + UTMIP_HSRX_CFG1); + writel_relaxed(val, base + UTMIP_HSRX_CFG1); - val = readl(base + UTMIP_DEBOUNCE_CFG0); + val = readl_relaxed(base + UTMIP_DEBOUNCE_CFG0); val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); - writel(val, base + UTMIP_DEBOUNCE_CFG0); + writel_relaxed(val, base + UTMIP_DEBOUNCE_CFG0); - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; - writel(val, base + UTMIP_MISC_CFG0); + writel_relaxed(val, base + UTMIP_MISC_CFG0); if (!phy->soc_config->utmi_pll_config_in_car_module) { - val = readl(base + UTMIP_MISC_CFG1); + val = readl_relaxed(base + UTMIP_MISC_CFG1); val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); - writel(val, base + UTMIP_MISC_CFG1); + writel_relaxed(val, base + UTMIP_MISC_CFG1); - val = readl(base + UTMIP_PLL_CFG1); + val = readl_relaxed(base + UTMIP_PLL_CFG1); val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); - writel(val, base + UTMIP_PLL_CFG1); + writel_relaxed(val, base + UTMIP_PLL_CFG1); } if (phy->mode == USB_DR_MODE_PERIPHERAL) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl(base + UTMIP_BAT_CHRG_CFG0); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val &= ~UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); + writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); } else { - val = readl(base + UTMIP_BAT_CHRG_CFG0); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val |= UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); + writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); } - utmip_pad_power_on(phy); + err = utmip_pad_power_on(phy); + if (err) + return err; - val = readl(base + UTMIP_XCVR_CFG0); + val = readl_relaxed(base + UTMIP_XCVR_CFG0); val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL | UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) | @@ -535,57 +540,57 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew); val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew); } - writel(val, base + UTMIP_XCVR_CFG0); + writel_relaxed(val, base + UTMIP_XCVR_CFG0); - val = readl(base + UTMIP_XCVR_CFG1); + val = readl_relaxed(base + UTMIP_XCVR_CFG1); val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); - writel(val, base + UTMIP_XCVR_CFG1); + writel_relaxed(val, base + UTMIP_XCVR_CFG1); - val = readl(base + UTMIP_BIAS_CFG1); + val = readl_relaxed(base + UTMIP_BIAS_CFG1); val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); val |= UTMIP_BIAS_PDTRK_COUNT(0x5); - writel(val, base + UTMIP_BIAS_CFG1); + writel_relaxed(val, base + UTMIP_BIAS_CFG1); - val = readl(base + UTMIP_SPARE_CFG0); + val = readl_relaxed(base + UTMIP_SPARE_CFG0); if (config->xcvr_setup_use_fuses) val |= FUSE_SETUP_SEL; else val &= ~FUSE_SETUP_SEL; - writel(val, base + UTMIP_SPARE_CFG0); + writel_relaxed(val, base + UTMIP_SPARE_CFG0); if (!phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UTMIP_PHY_ENABLE; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); } - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); if (phy->is_legacy_phy) { - val = readl(base + USB1_LEGACY_CTRL); + val = readl_relaxed(base + USB1_LEGACY_CTRL); val &= ~USB1_VBUS_SENSE_CTL_MASK; val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; - writel(val, base + USB1_LEGACY_CTRL); + writel_relaxed(val, base + USB1_LEGACY_CTRL); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); } utmi_phy_clk_enable(phy); if (phy->soc_config->requires_usbmode_setup) { - val = readl(base + USB_USBMODE); + val = readl_relaxed(base + USB_USBMODE); val &= ~USB_USBMODE_MASK; if (phy->mode == USB_DR_MODE_HOST) val |= USB_USBMODE_HOST; else val |= USB_USBMODE_DEVICE; - writel(val, base + USB_USBMODE); + writel_relaxed(val, base + USB_USBMODE); } if (!phy->is_legacy_phy) @@ -596,258 +601,252 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) static int utmi_phy_power_off(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; utmi_phy_clk_disable(phy); if (phy->mode == USB_DR_MODE_PERIPHERAL) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); } - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl(base + UTMIP_BAT_CHRG_CFG0); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val |= UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); + writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); - val = readl(base + UTMIP_XCVR_CFG0); + val = readl_relaxed(base + UTMIP_XCVR_CFG0); val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN; - writel(val, base + UTMIP_XCVR_CFG0); + writel_relaxed(val, base + UTMIP_XCVR_CFG0); - val = readl(base + UTMIP_XCVR_CFG1); + val = readl_relaxed(base + UTMIP_XCVR_CFG1); val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN; - writel(val, base + UTMIP_XCVR_CFG1); + writel_relaxed(val, base + UTMIP_XCVR_CFG1); return utmip_pad_power_off(phy); } static void utmi_phy_preresume(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_TX_CFG0); + val = readl_relaxed(base + UTMIP_TX_CFG0); val |= UTMIP_HS_DISCON_DISABLE; - writel(val, base + UTMIP_TX_CFG0); + writel_relaxed(val, base + UTMIP_TX_CFG0); } static void utmi_phy_postresume(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_TX_CFG0); + val = readl_relaxed(base + UTMIP_TX_CFG0); val &= ~UTMIP_HS_DISCON_DISABLE; - writel(val, base + UTMIP_TX_CFG0); + writel_relaxed(val, base + UTMIP_TX_CFG0); } static void utmi_phy_restore_start(struct tegra_usb_phy *phy, enum tegra_usb_phy_port_speed port_speed) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; else val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; - writel(val, base + UTMIP_MISC_CFG0); - udelay(1); + writel_relaxed(val, base + UTMIP_MISC_CFG0); + usleep_range(1, 10); - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val |= UTMIP_DPDM_OBSERVE; - writel(val, base + UTMIP_MISC_CFG0); - udelay(10); + writel_relaxed(val, base + UTMIP_MISC_CFG0); + usleep_range(10, 100); } static void utmi_phy_restore_end(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val &= ~UTMIP_DPDM_OBSERVE; - writel(val, base + UTMIP_MISC_CFG0); - udelay(10); + writel_relaxed(val, base + UTMIP_MISC_CFG0); + usleep_range(10, 100); } static int ulpi_phy_power_on(struct tegra_usb_phy *phy) { - int ret; - unsigned long val; void __iomem *base = phy->regs; + u32 val; + int err; - ret = gpio_direction_output(phy->reset_gpio, 0); - if (ret < 0) { - dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n", - phy->reset_gpio, ret); - return ret; - } - msleep(5); - ret = gpio_direction_output(phy->reset_gpio, 1); - if (ret < 0) { - dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n", - phy->reset_gpio, ret); - return ret; - } + gpiod_set_value_cansleep(phy->reset_gpio, 1); + + err = clk_prepare_enable(phy->clk); + if (err) + return err; + + usleep_range(5000, 6000); + + gpiod_set_value_cansleep(phy->reset_gpio, 0); - clk_prepare_enable(phy->clk); - msleep(1); + usleep_range(1000, 2000); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UHSIC_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl(base + ULPI_TIMING_CTRL_0); + val = readl_relaxed(base + ULPI_TIMING_CTRL_0); val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; - writel(val, base + ULPI_TIMING_CTRL_0); + writel_relaxed(val, base + ULPI_TIMING_CTRL_0); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= ULPI_PHY_ENABLE; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); val = 0; - writel(val, base + ULPI_TIMING_CTRL_1); + writel_relaxed(val, base + ULPI_TIMING_CTRL_1); val |= ULPI_DATA_TRIMMER_SEL(4); val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); val |= ULPI_DIR_TRIMMER_SEL(4); - writel(val, base + ULPI_TIMING_CTRL_1); - udelay(10); + writel_relaxed(val, base + ULPI_TIMING_CTRL_1); + usleep_range(10, 100); val |= ULPI_DATA_TRIMMER_LOAD; val |= ULPI_STPDIRNXT_TRIMMER_LOAD; val |= ULPI_DIR_TRIMMER_LOAD; - writel(val, base + ULPI_TIMING_CTRL_1); + writel_relaxed(val, base + ULPI_TIMING_CTRL_1); /* Fix VbusInvalid due to floating VBUS */ - ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); - if (ret) { - dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); - return ret; + err = usb_phy_io_write(phy->ulpi, 0x40, 0x08); + if (err) { + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err); + goto disable_clk; } - ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); - if (ret) { - dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); - return ret; + err = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); + if (err) { + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err); + goto disable_clk; } - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - udelay(100); + writel_relaxed(val, base + USB_SUSP_CTRL); + usleep_range(100, 1000); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); return 0; -} -static int ulpi_phy_power_off(struct tegra_usb_phy *phy) -{ - clk_disable(phy->clk); - return gpio_direction_output(phy->reset_gpio, 0); +disable_clk: + clk_disable_unprepare(phy->clk); + + return err; } -static void tegra_usb_phy_close(struct tegra_usb_phy *phy) +static int ulpi_phy_power_off(struct tegra_usb_phy *phy) { - if (!IS_ERR(phy->vbus)) - regulator_disable(phy->vbus); + gpiod_set_value_cansleep(phy->reset_gpio, 1); + usleep_range(5000, 6000); + clk_disable_unprepare(phy->clk); - if (!phy->is_ulpi_phy) - utmip_pad_close(phy); - - clk_disable_unprepare(phy->pll_u); + return 0; } static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) { + int err; + + if (phy->powered_on) + return 0; + if (phy->is_ulpi_phy) - return ulpi_phy_power_on(phy); + err = ulpi_phy_power_on(phy); else - return utmi_phy_power_on(phy); + err = utmi_phy_power_on(phy); + if (err) + return err; + + phy->powered_on = true; + + return 0; } static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) { + int err; + + if (!phy->powered_on) + return 0; + if (phy->is_ulpi_phy) - return ulpi_phy_power_off(phy); + err = ulpi_phy_power_off(phy); else - return utmi_phy_power_off(phy); -} + err = utmi_phy_power_off(phy); + if (err) + return err; -static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - if (suspend) - return tegra_usb_phy_power_off(phy); - else - return tegra_usb_phy_power_on(phy); + phy->powered_on = false; + + return 0; } -static int ulpi_open(struct tegra_usb_phy *phy) +static void tegra_usb_phy_shutdown(struct usb_phy *u_phy) { - int err; + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); - phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link"); - if (IS_ERR(phy->clk)) { - err = PTR_ERR(phy->clk); - dev_err(phy->u_phy.dev, "Failed to get ULPI clock: %d\n", err); - return err; - } + if (WARN_ON(!phy->freq)) + return; - err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio, - "ulpi_phy_reset_b"); - if (err < 0) { - dev_err(phy->u_phy.dev, "Request failed for GPIO %d: %d\n", - phy->reset_gpio, err); - return err; - } + tegra_usb_phy_power_off(phy); - err = gpio_direction_output(phy->reset_gpio, 0); - if (err < 0) { - dev_err(phy->u_phy.dev, - "GPIO %d direction not set to output: %d\n", - phy->reset_gpio, err); - return err; - } + if (!phy->is_ulpi_phy) + utmip_pad_close(phy); - phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); - if (!phy->ulpi) { - dev_err(phy->u_phy.dev, "Failed to create ULPI OTG\n"); - err = -ENOMEM; - return err; - } + regulator_disable(phy->vbus); + clk_disable_unprepare(phy->pll_u); - phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; - return 0; + phy->freq = NULL; } -static int tegra_usb_phy_init(struct tegra_usb_phy *phy) +static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend) { + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); + + if (WARN_ON(!phy->freq)) + return -EINVAL; + + if (suspend) + return tegra_usb_phy_power_off(phy); + else + return tegra_usb_phy_power_on(phy); +} + +static int tegra_usb_phy_init(struct usb_phy *u_phy) +{ + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); unsigned long parent_rate; - int i; + unsigned int i; int err; - phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u"); - if (IS_ERR(phy->pll_u)) { - err = PTR_ERR(phy->pll_u); - dev_err(phy->u_phy.dev, - "Failed to get pll_u clock: %d\n", err); - return err; - } + if (WARN_ON(phy->freq)) + return 0; err = clk_prepare_enable(phy->pll_u); if (err) @@ -864,64 +863,74 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n", parent_rate); err = -EINVAL; - goto fail; + goto disable_clk; } - if (!IS_ERR(phy->vbus)) { - err = regulator_enable(phy->vbus); - if (err) { - dev_err(phy->u_phy.dev, - "Failed to enable USB VBUS regulator: %d\n", - err); - goto fail; - } + err = regulator_enable(phy->vbus); + if (err) { + dev_err(phy->u_phy.dev, + "Failed to enable USB VBUS regulator: %d\n", err); + goto disable_clk; } - if (phy->is_ulpi_phy) - err = ulpi_open(phy); - else + if (!phy->is_ulpi_phy) { err = utmip_pad_open(phy); - if (err < 0) - goto fail; + if (err) + goto disable_vbus; + } + + err = tegra_usb_phy_power_on(phy); + if (err) + goto close_phy; return 0; -fail: +close_phy: + if (!phy->is_ulpi_phy) + utmip_pad_close(phy); + +disable_vbus: + regulator_disable(phy->vbus); + +disable_clk: clk_disable_unprepare(phy->pll_u); + + phy->freq = NULL; + return err; } -void tegra_usb_phy_preresume(struct usb_phy *x) +void tegra_usb_phy_preresume(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_preresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); -void tegra_usb_phy_postresume(struct usb_phy *x) +void tegra_usb_phy_postresume(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_postresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); -void tegra_ehci_phy_restore_start(struct usb_phy *x, - enum tegra_usb_phy_port_speed port_speed) +void tegra_ehci_phy_restore_start(struct usb_phy *u_phy, + enum tegra_usb_phy_port_speed port_speed) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_restore_start(phy, port_speed); } EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); -void tegra_ehci_phy_restore_end(struct usb_phy *x) +void tegra_ehci_phy_restore_end(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_restore_end(phy); @@ -932,21 +941,25 @@ static int read_utmi_param(struct platform_device *pdev, const char *param, u8 *dest) { u32 value; - int err = of_property_read_u32(pdev->dev.of_node, param, &value); - *dest = (u8)value; - if (err < 0) + int err; + + err = of_property_read_u32(pdev->dev.of_node, param, &value); + if (err) dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n", param, err); + else + *dest = value; + return err; } static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, struct platform_device *pdev) { + struct tegra_utmip_config *config; struct resource *res; int err; - struct tegra_utmip_config *config; tegra_phy->is_ulpi_phy = false; @@ -957,7 +970,7 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, } tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + resource_size(res)); if (!tegra_phy->pad_regs) { dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n"); return -ENOMEM; @@ -971,49 +984,49 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, config = tegra_phy->config; err = read_utmi_param(pdev, "nvidia,hssync-start-delay", - &config->hssync_start_delay); - if (err < 0) + &config->hssync_start_delay); + if (err) return err; err = read_utmi_param(pdev, "nvidia,elastic-limit", - &config->elastic_limit); - if (err < 0) + &config->elastic_limit); + if (err) return err; err = read_utmi_param(pdev, "nvidia,idle-wait-delay", - &config->idle_wait_delay); - if (err < 0) + &config->idle_wait_delay); + if (err) return err; err = read_utmi_param(pdev, "nvidia,term-range-adj", - &config->term_range_adj); - if (err < 0) + &config->term_range_adj); + if (err) return err; err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew", - &config->xcvr_lsfslew); - if (err < 0) + &config->xcvr_lsfslew); + if (err) return err; err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew", - &config->xcvr_lsrslew); - if (err < 0) + &config->xcvr_lsrslew); + if (err) return err; if (tegra_phy->soc_config->requires_extra_tuning_parameters) { err = read_utmi_param(pdev, "nvidia,xcvr-hsslew", - &config->xcvr_hsslew); - if (err < 0) + &config->xcvr_hsslew); + if (err) return err; err = read_utmi_param(pdev, "nvidia,hssquelch-level", - &config->hssquelch_level); - if (err < 0) + &config->hssquelch_level); + if (err) return err; err = read_utmi_param(pdev, "nvidia,hsdiscon-level", - &config->hsdiscon_level); - if (err < 0) + &config->hsdiscon_level); + if (err) return err; } @@ -1022,8 +1035,8 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, if (!config->xcvr_setup_use_fuses) { err = read_utmi_param(pdev, "nvidia,xcvr-setup", - &config->xcvr_setup); - if (err < 0) + &config->xcvr_setup); + if (err) return err; } @@ -1053,23 +1066,20 @@ MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table); static int tegra_usb_phy_probe(struct platform_device *pdev) { - const struct of_device_id *match; - struct resource *res; - struct tegra_usb_phy *tegra_phy = NULL; struct device_node *np = pdev->dev.of_node; + struct tegra_usb_phy *tegra_phy; enum usb_phy_interface phy_type; + struct reset_control *reset; + struct gpio_desc *gpiod; + struct resource *res; + struct usb_phy *phy; int err; tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL); if (!tegra_phy) return -ENOMEM; - match = of_match_device(tegra_usb_phy_id_table, &pdev->dev); - if (!match) { - dev_err(&pdev->dev, "Error: No device match found\n"); - return -ENODEV; - } - tegra_phy->soc_config = match->data; + tegra_phy->soc_config = of_device_get_match_data(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1078,7 +1088,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) } tegra_phy->regs = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + resource_size(res)); if (!tegra_phy->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); return -ENOMEM; @@ -1087,25 +1097,86 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->is_legacy_phy = of_property_read_bool(np, "nvidia,has-legacy-mode"); + if (of_find_property(np, "dr_mode", NULL)) + tegra_phy->mode = usb_get_dr_mode(&pdev->dev); + else + tegra_phy->mode = USB_DR_MODE_HOST; + + if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) { + dev_err(&pdev->dev, "dr_mode is invalid\n"); + return -EINVAL; + } + + /* On some boards, the VBUS regulator doesn't need to be controlled */ + tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus"); + if (IS_ERR(tegra_phy->vbus)) + return PTR_ERR(tegra_phy->vbus); + + tegra_phy->pll_u = devm_clk_get(&pdev->dev, "pll_u"); + err = PTR_ERR_OR_ZERO(tegra_phy->pll_u); + if (err) { + dev_err(&pdev->dev, "Failed to get pll_u clock: %d\n", err); + return err; + } + phy_type = of_usb_get_phy_mode(np); switch (phy_type) { case USBPHY_INTERFACE_MODE_UTMI: err = utmi_phy_probe(tegra_phy, pdev); - if (err < 0) + if (err) return err; + + tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads"); + err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk); + if (err) { + dev_err(&pdev->dev, + "Failed to get UTMIP pad clock: %d\n", err); + return err; + } + + reset = devm_reset_control_get_optional_shared(&pdev->dev, + "utmi-pads"); + err = PTR_ERR_OR_ZERO(reset); + if (err) { + dev_err(&pdev->dev, + "Failed to get UTMI-pads reset: %d\n", err); + return err; + } + tegra_phy->pad_rst = reset; break; case USBPHY_INTERFACE_MODE_ULPI: tegra_phy->is_ulpi_phy = true; - tegra_phy->reset_gpio = - of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); - if (!gpio_is_valid(tegra_phy->reset_gpio)) { + tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link"); + err = PTR_ERR_OR_ZERO(tegra_phy->clk); + if (err) { + dev_err(&pdev->dev, + "Failed to get ULPI clock: %d\n", err); + return err; + } + + gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np, + "nvidia,phy-reset-gpio", + 0, GPIOD_OUT_HIGH, + "ulpi_phy_reset_b"); + err = PTR_ERR_OR_ZERO(gpiod); + if (err) { dev_err(&pdev->dev, - "Invalid GPIO: %d\n", tegra_phy->reset_gpio); - return tegra_phy->reset_gpio; + "Request failed for reset GPIO: %d\n", err); + return err; + } + tegra_phy->reset_gpio = gpiod; + + phy = devm_otg_ulpi_create(&pdev->dev, + &ulpi_viewport_access_ops, 0); + if (!phy) { + dev_err(&pdev->dev, "Failed to create ULPI OTG\n"); + return -ENOMEM; } - tegra_phy->config = NULL; + + tegra_phy->ulpi = phy; + tegra_phy->ulpi->io_priv = tegra_phy->regs + ULPI_VIEWPORT; break; default: @@ -1114,40 +1185,16 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) return -EINVAL; } - if (of_find_property(np, "dr_mode", NULL)) - tegra_phy->mode = usb_get_dr_mode(&pdev->dev); - else - tegra_phy->mode = USB_DR_MODE_HOST; - - if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) { - dev_err(&pdev->dev, "dr_mode is invalid\n"); - return -EINVAL; - } - - /* On some boards, the VBUS regulator doesn't need to be controlled */ - if (of_find_property(np, "vbus-supply", NULL)) { - tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus"); - if (IS_ERR(tegra_phy->vbus)) - return PTR_ERR(tegra_phy->vbus); - } else { - dev_notice(&pdev->dev, "no vbus regulator"); - tegra_phy->vbus = ERR_PTR(-ENODEV); - } - tegra_phy->u_phy.dev = &pdev->dev; - err = tegra_usb_phy_init(tegra_phy); - if (err < 0) - return err; - - tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend; + tegra_phy->u_phy.init = tegra_usb_phy_init; + tegra_phy->u_phy.shutdown = tegra_usb_phy_shutdown; + tegra_phy->u_phy.set_suspend = tegra_usb_phy_set_suspend; platform_set_drvdata(pdev, tegra_phy); err = usb_add_phy_dev(&tegra_phy->u_phy); - if (err < 0) { - tegra_usb_phy_close(tegra_phy); + if (err) return err; - } return 0; } @@ -1157,7 +1204,6 @@ static int tegra_usb_phy_remove(struct platform_device *pdev) struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev); usb_remove_phy(&tegra_phy->u_phy); - tegra_usb_phy_close(tegra_phy); return 0; } diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c index a43c49369a60..e683a37e3a7a 100644 --- a/drivers/usb/phy/phy-ulpi.c +++ b/drivers/usb/phy/phy-ulpi.c @@ -240,6 +240,21 @@ static int ulpi_set_vbus(struct usb_otg *otg, bool on) return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL); } +static void otg_ulpi_init(struct usb_phy *phy, struct usb_otg *otg, + struct usb_phy_io_ops *ops, + unsigned int flags) +{ + phy->label = "ULPI"; + phy->flags = flags; + phy->io_ops = ops; + phy->otg = otg; + phy->init = ulpi_init; + + otg->usb_phy = phy; + otg->set_host = ulpi_set_host; + otg->set_vbus = ulpi_set_vbus; +} + struct usb_phy * otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags) @@ -257,17 +272,32 @@ otg_ulpi_create(struct usb_phy_io_ops *ops, return NULL; } - phy->label = "ULPI"; - phy->flags = flags; - phy->io_ops = ops; - phy->otg = otg; - phy->init = ulpi_init; - - otg->usb_phy = phy; - otg->set_host = ulpi_set_host; - otg->set_vbus = ulpi_set_vbus; + otg_ulpi_init(phy, otg, ops, flags); return phy; } EXPORT_SYMBOL_GPL(otg_ulpi_create); +struct usb_phy * +devm_otg_ulpi_create(struct device *dev, + struct usb_phy_io_ops *ops, + unsigned int flags) +{ + struct usb_phy *phy; + struct usb_otg *otg; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return NULL; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + devm_kfree(dev, phy); + return NULL; + } + + otg_ulpi_init(phy, otg, ops, flags); + + return phy; +} +EXPORT_SYMBOL_GPL(devm_otg_ulpi_create); diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 0277f62739a2..ad2554630889 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -34,6 +34,14 @@ struct phy_devm { struct notifier_block *nb; }; +static const char *const usb_chger_type[] = { + [UNKNOWN_TYPE] = "USB_CHARGER_UNKNOWN_TYPE", + [SDP_TYPE] = "USB_CHARGER_SDP_TYPE", + [CDP_TYPE] = "USB_CHARGER_CDP_TYPE", + [DCP_TYPE] = "USB_CHARGER_DCP_TYPE", + [ACA_TYPE] = "USB_CHARGER_ACA_TYPE", +}; + static struct usb_phy *__usb_find_phy(struct list_head *list, enum usb_phy_type type) { @@ -98,7 +106,8 @@ static void usb_phy_notify_charger_work(struct work_struct *work) { struct usb_phy *usb_phy = container_of(work, struct usb_phy, chg_work); char uchger_state[50] = { 0 }; - char *envp[] = { uchger_state, NULL }; + char uchger_type[50] = { 0 }; + char *envp[] = { uchger_state, uchger_type, NULL }; unsigned int min, max; switch (usb_phy->chg_state) { @@ -122,6 +131,8 @@ static void usb_phy_notify_charger_work(struct work_struct *work) return; } + snprintf(uchger_type, ARRAY_SIZE(uchger_type), + "USB_CHARGER_TYPE=%s", usb_chger_type[usb_phy->chg_type]); kobject_uevent_env(&usb_phy->dev->kobj, KOBJ_CHANGE, envp); } diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d438b7871446..3af91b2b8f76 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -8,11 +8,10 @@ */ #include <linux/clk.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/slab.h> @@ -592,7 +591,8 @@ static int usbhs_probe(struct platform_device *pdev) struct usbhs_priv *priv; struct resource *irq_res; struct device *dev = &pdev->dev; - int ret, gpio; + struct gpio_desc *gpiod; + int ret; u32 tmp; /* check device node */ @@ -657,10 +657,9 @@ static int usbhs_probe(struct platform_device *pdev) priv->dparam.pio_dma_border = 64; /* 64byte */ if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp)) priv->dparam.buswait_bwait = tmp; - gpio = of_get_named_gpio_flags(dev_of_node(dev), "renesas,enable-gpio", - 0, NULL); - if (gpio > 0) - priv->dparam.enable_gpio = gpio; + gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); /* FIXME */ /* runtime power control ? */ @@ -708,13 +707,10 @@ static int usbhs_probe(struct platform_device *pdev) usbhs_sys_clock_ctrl(priv, 0); /* check GPIO determining if USB function should be enabled */ - if (priv->dparam.enable_gpio) { - gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL); - ret = !gpio_get_value(priv->dparam.enable_gpio); - gpio_free(priv->dparam.enable_gpio); + if (gpiod) { + ret = !gpiod_get_value(gpiod); if (ret) { - dev_warn(dev, "USB function not selected (GPIO %d)\n", - priv->dparam.enable_gpio); + dev_warn(dev, "USB function not selected (GPIO)\n"); ret = -ENOTSUPP; goto probe_end_mod_exit; } diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index 440d213e1749..52756fc2ac9c 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -6,8 +6,6 @@ * Copyright (C) 2019 Renesas Electronics Corporation */ -#include <linux/gpio.h> -#include <linux/of_gpio.h> #include <linux/phy/phy.h> #include "common.h" #include "rcar2.h" @@ -34,7 +32,7 @@ static int usbhs_rcar2_hardware_exit(struct platform_device *pdev) struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); if (priv->phy) { - phy_put(priv->phy); + phy_put(&pdev->dev, priv->phy); priv->phy = NULL; } diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c index 021749594389..3eed3334a17f 100644 --- a/drivers/usb/renesas_usbhs/rza2.c +++ b/drivers/usb/renesas_usbhs/rza2.c @@ -29,7 +29,7 @@ static int usbhs_rza2_hardware_exit(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - phy_put(priv->phy); + phy_put(&pdev->dev, priv->phy); priv->phy = NULL; return 0; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ed4a18b435a0..25d7e0c36d38 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -129,9 +129,6 @@ config USB_SERIAL_DIGI_ACCELEPORT parallel port on the USB 2 appears as a third serial port on Linux. The Digi Acceleport USB 8 is not yet supported by this driver. - This driver works under SMP with the usb-uhci driver. It does not - work under SMP with the uhci driver. - To compile this driver as a module, choose M here: the module will be called digi_acceleport. diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index ebd76ab07b72..821970609695 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -276,7 +276,7 @@ static void cyberjack_read_int_callback(struct urb *urb) old_rdtodo = priv->rdtodo; if (old_rdtodo > SHRT_MAX - size) { - dev_dbg(dev, "To many bulk_in urbs to do.\n"); + dev_dbg(dev, "Too many bulk_in urbs to do.\n"); spin_unlock_irqrestore(&priv->lock, flags); goto resubmit; } diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 633550ec3025..ffd984142171 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -104,7 +104,7 @@ struct garmin_packet { int seq; /* the real size of the data array, always > 0 */ int size; - __u8 data[1]; + __u8 data[]; }; /* structure used to keep the current state of the driver */ diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 302eb9530859..79d0586e2b33 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -45,9 +45,10 @@ static int buffer_size; static int xbof = -1; static int ir_startup (struct usb_serial *serial); -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port); -static int ir_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size); +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int ir_write_room(struct tty_struct *tty); +static void ir_write_bulk_callback(struct urb *urb); static void ir_process_read_urb(struct urb *urb); static void ir_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); @@ -75,10 +76,13 @@ static struct usb_serial_driver ir_device = { .description = "IR Dongle", .id_table = ir_id_table, .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, .set_termios = ir_set_termios, .attach = ir_startup, - .open = ir_open, - .prepare_write_buffer = ir_prepare_write_buffer, + .write = ir_write, + .write_room = ir_write_room, + .write_bulk_callback = ir_write_bulk_callback, .process_read_urb = ir_process_read_urb, }; @@ -251,35 +255,102 @@ static int ir_startup(struct usb_serial *serial) return 0; } -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port) +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { - int i; + struct urb *urb = NULL; + unsigned long flags; + int ret; - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET; + if (port->bulk_out_size == 0) + return -EINVAL; - /* Start reading from the device */ - return usb_serial_generic_open(tty, port); -} + if (count == 0) + return 0; -static int ir_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size) -{ - unsigned char *buf = dest; - int count; + count = min(count, port->bulk_out_size - 1); + + spin_lock_irqsave(&port->lock, flags); + if (__test_and_clear_bit(0, &port->write_urbs_free)) { + urb = port->write_urbs[0]; + port->tx_bytes += count; + } + spin_unlock_irqrestore(&port->lock, flags); + + if (!urb) + return 0; /* * The first byte of the packet we send to the device contains an - * inbound header which indicates an additional number of BOFs and + * outbound header which indicates an additional number of BOFs and * a baud rate change. * * See section 5.4.2.2 of the USB IrDA spec. */ - *buf = ir_xbof | ir_baud; + *(u8 *)urb->transfer_buffer = ir_xbof | ir_baud; + + memcpy(urb->transfer_buffer + 1, buf, count); + + urb->transfer_buffer_length = count + 1; + urb->transfer_flags = URB_ZERO_PACKET; + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + dev_err(&port->dev, "failed to submit write urb: %d\n", ret); + + spin_lock_irqsave(&port->lock, flags); + __set_bit(0, &port->write_urbs_free); + port->tx_bytes -= count; + spin_unlock_irqrestore(&port->lock, flags); + + return ret; + } + + return count; +} + +static void ir_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __set_bit(0, &port->write_urbs_free); + port->tx_bytes -= urb->transfer_buffer_length - 1; + spin_unlock_irqrestore(&port->lock, flags); + + switch (status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "write urb stopped: %d\n", status); + return; + case -EPIPE: + dev_err(&port->dev, "write urb stopped: %d\n", status); + return; + default: + dev_err(&port->dev, "nonzero write-urb status: %d\n", status); + break; + } + + usb_serial_port_softint(port); +} - count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1, - &port->lock); - return count + 1; +static int ir_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int count = 0; + + if (port->bulk_out_size == 0) + return 0; + + if (test_bit(0, &port->write_urbs_free)) + count = port->bulk_out_size - 1; + + return count; } static void ir_process_read_urb(struct urb *urb) @@ -304,23 +375,15 @@ static void ir_process_read_urb(struct urb *urb) tty_flip_buffer_push(&port->port); } -static void ir_set_termios_callback(struct urb *urb) -{ - kfree(urb->transfer_buffer); - - if (urb->status) - dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n", - __func__, urb->status); -} - static void ir_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - struct urb *urb; + struct usb_device *udev = port->serial->dev; unsigned char *transfer_buffer; - int result; + int actual_length; speed_t baud; int ir_baud; + int ret; baud = tty_get_baud_rate(tty); @@ -332,34 +395,34 @@ static void ir_set_termios(struct tty_struct *tty, switch (baud) { case 2400: - ir_baud = USB_IRDA_BR_2400; + ir_baud = USB_IRDA_LS_2400; break; case 9600: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; break; case 19200: - ir_baud = USB_IRDA_BR_19200; + ir_baud = USB_IRDA_LS_19200; break; case 38400: - ir_baud = USB_IRDA_BR_38400; + ir_baud = USB_IRDA_LS_38400; break; case 57600: - ir_baud = USB_IRDA_BR_57600; + ir_baud = USB_IRDA_LS_57600; break; case 115200: - ir_baud = USB_IRDA_BR_115200; + ir_baud = USB_IRDA_LS_115200; break; case 576000: - ir_baud = USB_IRDA_BR_576000; + ir_baud = USB_IRDA_LS_576000; break; case 1152000: - ir_baud = USB_IRDA_BR_1152000; + ir_baud = USB_IRDA_LS_1152000; break; case 4000000: - ir_baud = USB_IRDA_BR_4000000; + ir_baud = USB_IRDA_LS_4000000; break; default: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; baud = 9600; } @@ -375,42 +438,22 @@ static void ir_set_termios(struct tty_struct *tty, /* * send the baud change out on an "empty" data packet */ - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) - return; - transfer_buffer = kmalloc(1, GFP_KERNEL); if (!transfer_buffer) - goto err_buf; + return; *transfer_buffer = ir_xbof | ir_baud; - usb_fill_bulk_urb( - urb, - port->serial->dev, - usb_sndbulkpipe(port->serial->dev, - port->bulk_out_endpointAddress), - transfer_buffer, - 1, - ir_set_termios_callback, - port); - - urb->transfer_flags = URB_ZERO_PACKET; - - result = usb_submit_urb(urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, "%s - failed to submit urb: %d\n", - __func__, result); - goto err_subm; + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, port->bulk_out_endpointAddress), + transfer_buffer, 1, &actual_length, 5000); + if (ret || actual_length != 1) { + if (actual_length != 1) + ret = -EIO; + dev_err(&port->dev, "failed to change line speed: %d\n", ret); } - usb_free_urb(urb); - - return; -err_subm: kfree(transfer_buffer); -err_buf: - usb_free_urb(urb); } static int __init ir_init(void) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index ed2b4e6dca38..0af76800bd78 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -41,6 +41,9 @@ struct opticon_private { bool rts; bool cts; int outstanding_urbs; + int outstanding_bytes; + + struct usb_anchor anchor; }; @@ -149,6 +152,15 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) return res; } +static void opticon_close(struct usb_serial_port *port) +{ + struct opticon_private *priv = usb_get_serial_port_data(port); + + usb_kill_anchored_urbs(&priv->anchor); + + usb_serial_generic_close(port); +} + static void opticon_write_control_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -169,6 +181,7 @@ static void opticon_write_control_callback(struct urb *urb) spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; + priv->outstanding_bytes -= urb->transfer_buffer_length; spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); @@ -182,8 +195,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; unsigned char *buffer; unsigned long flags; - int status; struct usb_ctrlrequest *dr; + int ret = -ENOMEM; spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { @@ -192,19 +205,16 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; } priv->outstanding_urbs++; + priv->outstanding_bytes += count; spin_unlock_irqrestore(&priv->lock, flags); buffer = kmalloc(count, GFP_ATOMIC); - if (!buffer) { - count = -ENOMEM; + if (!buffer) goto error_no_buffer; - } urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - count = -ENOMEM; + if (!urb) goto error_no_urb; - } memcpy(buffer, buf, count); @@ -213,10 +223,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, /* The connected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); - if (!dr) { - count = -ENOMEM; + if (!dr) goto error_no_dr; - } dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; dr->bRequest = 0x01; @@ -229,13 +237,13 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, (unsigned char *)dr, buffer, count, opticon_write_control_callback, port); + usb_anchor_urb(urb, &priv->anchor); + /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status) { - dev_err(&port->dev, - "%s - usb_submit_urb(write endpoint) failed status = %d\n", - __func__, status); - count = status; + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + dev_err(&port->dev, "failed to submit write urb: %d\n", ret); + usb_unanchor_urb(urb); goto error; } @@ -253,8 +261,10 @@ error_no_urb: error_no_buffer: spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; + priv->outstanding_bytes -= count; spin_unlock_irqrestore(&priv->lock, flags); - return count; + + return ret; } static int opticon_write_room(struct tty_struct *tty) @@ -279,6 +289,20 @@ static int opticon_write_room(struct tty_struct *tty) return 2048; } +static int opticon_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int count; + + spin_lock_irqsave(&priv->lock, flags); + count = priv->outstanding_bytes; + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + static int opticon_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -354,6 +378,7 @@ static int opticon_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); + init_usb_anchor(&priv->anchor); usb_set_serial_port_data(port, priv); @@ -381,8 +406,10 @@ static struct usb_serial_driver opticon_device = { .port_probe = opticon_port_probe, .port_remove = opticon_port_remove, .open = opticon_open, + .close = opticon_close, .write = opticon_write, .write_room = opticon_write_room, + .chars_in_buffer = opticon_chars_in_buffer, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .get_serial = get_serial_info, diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 4092248a5936..0edfb89e04a8 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -188,7 +188,7 @@ static void dp_altmode_work(struct work_struct *work) switch (dp->state) { case DP_STATE_ENTER: - ret = typec_altmode_enter(dp->alt); + ret = typec_altmode_enter(dp->alt, NULL); if (ret) dev_err(&dp->alt->dev, "failed to enter mode\n"); break; @@ -306,7 +306,8 @@ err_unlock: static int dp_altmode_activate(struct typec_altmode *alt, int activate) { - return activate ? typec_altmode_enter(alt) : typec_altmode_exit(alt); + return activate ? typec_altmode_enter(alt, NULL) : + typec_altmode_exit(alt); } static const struct typec_altmode_ops dp_altmode_ops = { diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c index 74cb3c2ecb34..2e45eb479386 100644 --- a/drivers/usb/typec/bus.c +++ b/drivers/usb/typec/bus.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * Bus for USB Type-C Alternate Modes * * Copyright (C) 2018 Intel Corporation @@ -10,12 +10,23 @@ #include "bus.h" -static inline int typec_altmode_set_mux(struct altmode *alt, u8 state) +static inline int +typec_altmode_set_mux(struct altmode *alt, unsigned long conf, void *data) { - return alt->mux ? alt->mux->set(alt->mux, state) : 0; + struct typec_mux_state state; + + if (!alt->mux) + return 0; + + state.alt = &alt->adev; + state.mode = conf; + state.data = data; + + return alt->mux->set(alt->mux, &state); } -static int typec_altmode_set_state(struct typec_altmode *adev, int state) +static int typec_altmode_set_state(struct typec_altmode *adev, + unsigned long conf, void *data) { bool is_port = is_typec_port(adev->dev.parent); struct altmode *port_altmode; @@ -23,11 +34,11 @@ static int typec_altmode_set_state(struct typec_altmode *adev, int state) port_altmode = is_port ? to_altmode(adev) : to_altmode(adev)->partner; - ret = typec_altmode_set_mux(port_altmode, state); + ret = typec_altmode_set_mux(port_altmode, conf, data); if (ret) return ret; - blocking_notifier_call_chain(&port_altmode->nh, state, NULL); + blocking_notifier_call_chain(&port_altmode->nh, conf, NULL); return 0; } @@ -67,7 +78,7 @@ int typec_altmode_notify(struct typec_altmode *adev, is_port = is_typec_port(adev->dev.parent); partner = altmode->partner; - ret = typec_altmode_set_mux(is_port ? altmode : partner, (u8)conf); + ret = typec_altmode_set_mux(is_port ? altmode : partner, conf, data); if (ret) return ret; @@ -84,12 +95,14 @@ EXPORT_SYMBOL_GPL(typec_altmode_notify); /** * typec_altmode_enter - Enter Mode * @adev: The alternate mode + * @vdo: VDO for the Enter Mode command * * The alternate mode drivers use this function to enter mode. The port drivers * use this to inform the alternate mode drivers that the partner has initiated - * Enter Mode command. + * Enter Mode command. If the alternate mode does not require VDO, @vdo must be + * NULL. */ -int typec_altmode_enter(struct typec_altmode *adev) +int typec_altmode_enter(struct typec_altmode *adev, u32 *vdo) { struct altmode *partner = to_altmode(adev)->partner; struct typec_altmode *pdev = &partner->adev; @@ -101,13 +114,16 @@ int typec_altmode_enter(struct typec_altmode *adev) if (!pdev->ops || !pdev->ops->enter) return -EOPNOTSUPP; + if (is_typec_port(pdev->dev.parent) && !pdev->active) + return -EPERM; + /* Moving to USB Safe State */ - ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE); + ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL); if (ret) return ret; /* Enter Mode */ - return pdev->ops->enter(pdev); + return pdev->ops->enter(pdev, vdo); } EXPORT_SYMBOL_GPL(typec_altmode_enter); @@ -130,7 +146,7 @@ int typec_altmode_exit(struct typec_altmode *adev) return -EOPNOTSUPP; /* Moving to USB Safe State */ - ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE); + ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL); if (ret) return ret; @@ -383,7 +399,7 @@ static int typec_remove(struct device *dev) drv->remove(to_typec_altmode(dev)); if (adev->active) { - WARN_ON(typec_altmode_set_state(adev, TYPEC_STATE_SAFE)); + WARN_ON(typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL)); typec_altmode_update_active(adev, false); } diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 91d62276b56f..7c44e930602f 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -834,6 +834,52 @@ static const struct device_type typec_cable_dev_type = { .release = typec_cable_release, }; +static int cable_match(struct device *dev, void *data) +{ + return is_typec_cable(dev); +} + +/** + * typec_cable_get - Get a reference to the USB Type-C cable + * @port: The USB Type-C Port the cable is connected to + * + * The caller must decrement the reference count with typec_cable_put() after + * use. + */ +struct typec_cable *typec_cable_get(struct typec_port *port) +{ + struct device *dev; + + dev = device_find_child(&port->dev, NULL, cable_match); + if (!dev) + return NULL; + + return to_typec_cable(dev); +} +EXPORT_SYMBOL_GPL(typec_cable_get); + +/** + * typec_cable_get - Decrement the reference count on USB Type-C cable + * @cable: The USB Type-C cable + */ +void typec_cable_put(struct typec_cable *cable) +{ + put_device(&cable->dev); +} +EXPORT_SYMBOL_GPL(typec_cable_put); + +/** + * typec_cable_is_active - Check is the USB Type-C cable active or passive + * @cable: The USB Type-C Cable + * + * Return 1 if the cable is active or 0 if it's passive. + */ +int typec_cable_is_active(struct typec_cable *cable) +{ + return cable->active; +} +EXPORT_SYMBOL_GPL(typec_cable_is_active); + /** * typec_cable_set_identity - Report result from Discover Identity command * @cable: The cable updated identity values @@ -1483,7 +1529,11 @@ EXPORT_SYMBOL_GPL(typec_get_orientation); */ int typec_set_mode(struct typec_port *port, int mode) { - return port->mux ? port->mux->set(port->mux, mode) : 0; + struct typec_mux_state state = { }; + + state.mode = mode; + + return port->mux ? port->mux->set(port->mux, &state) : 0; } EXPORT_SYMBOL_GPL(typec_set_mode); diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index 57907f26f681..5baf0f416c73 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * USB Type-C Multiplexer/DeMultiplexer Switch support * * Copyright (C) 2018 Intel Corporation diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c index 5585b109095b..46457c133d2b 100644 --- a/drivers/usb/typec/mux/pi3usb30532.c +++ b/drivers/usb/typec/mux/pi3usb30532.c @@ -73,7 +73,8 @@ static int pi3usb30532_sw_set(struct typec_switch *sw, return ret; } -static int pi3usb30532_mux_set(struct typec_mux *mux, int state) +static int +pi3usb30532_mux_set(struct typec_mux *mux, struct typec_mux_state *state) { struct pi3usb30532 *pi = typec_mux_get_drvdata(mux); u8 new_conf; @@ -82,7 +83,7 @@ static int pi3usb30532_mux_set(struct typec_mux *mux, int state) mutex_lock(&pi->lock); new_conf = pi->conf; - switch (state) { + switch (state->mode) { case TYPEC_STATE_SAFE: new_conf = (new_conf & PI3USB30532_CONF_SWAP) | PI3USB30532_CONF_OPEN; diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index ed8655c6af8c..b498960ff72b 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1666,7 +1666,7 @@ static const struct property_entry port_props[] = { PROPERTY_ENTRY_STRING("try-power-role", "sink"), PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), - PROPERTY_ENTRY_U32("op-sink-microwatt", 2500), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), { } }; diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 8b4ff9fff340..753645bb2527 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -591,6 +591,12 @@ static int tcpci_probe(struct i2c_client *client, static int tcpci_remove(struct i2c_client *client) { struct tcpci_chip *chip = i2c_get_clientdata(client); + int err; + + /* Disable chip interrupts before unregistering port */ + err = tcpci_write16(chip->tcpci, TCPC_ALERT_MASK, 0); + if (err < 0) + return err; tcpci_unregister_port(chip->tcpci); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 56fc356bc55c..f3087ef8265c 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1475,16 +1475,16 @@ static int tcpm_validate_caps(struct tcpm_port *port, const u32 *pdo, return 0; } -static int tcpm_altmode_enter(struct typec_altmode *altmode) +static int tcpm_altmode_enter(struct typec_altmode *altmode, u32 *vdo) { struct tcpm_port *port = typec_altmode_get_drvdata(altmode); u32 header; mutex_lock(&port->lock); - header = VDO(altmode->svid, 1, CMD_ENTER_MODE); + header = VDO(altmode->svid, vdo ? 2 : 1, CMD_ENTER_MODE); header |= VDO_OPOS(altmode->mode); - tcpm_queue_vdm(port, header, NULL, 0); + tcpm_queue_vdm(port, header, vdo, vdo ? 1 : 0); mod_delayed_work(port->wq, &port->vdm_state_machine, 0); mutex_unlock(&port->lock); diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c index edc271da14f4..9b745f432c91 100644 --- a/drivers/usb/typec/tcpm/wcove.c +++ b/drivers/usb/typec/tcpm/wcove.c @@ -597,7 +597,7 @@ static const struct property_entry wcove_props[] = { PROPERTY_ENTRY_STRING("try-power-role", "sink"), PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), - PROPERTY_ENTRY_U32("op-sink-microwatt", 15000), + PROPERTY_ENTRY_U32("op-sink-microwatt", 15000000), { } }; diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c index d4d5189edfb8..0f1273ae086c 100644 --- a/drivers/usb/typec/ucsi/displayport.c +++ b/drivers/usb/typec/ucsi/displayport.c @@ -45,7 +45,7 @@ struct ucsi_dp { * -EOPNOTSUPP. */ -static int ucsi_displayport_enter(struct typec_altmode *alt) +static int ucsi_displayport_enter(struct typec_altmode *alt, u32 *vdo) { struct ucsi_dp *dp = typec_altmode_get_drvdata(alt); struct ucsi *ucsi = dp->con->ucsi; diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 4459bc68aa33..d5a6aac86327 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -189,7 +189,7 @@ int ucsi_resume(struct ucsi *ucsi) u64 command; /* Restore UCSI notification enable mask after system resume */ - command = UCSI_SET_NOTIFICATION_ENABLE | UCSI_ENABLE_NTFY_ALL; + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; return ucsi_send_command(ucsi, command, NULL, 0); } @@ -318,6 +318,82 @@ err: return ret; } +static int +ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient) +{ + int max_altmodes = UCSI_MAX_ALTMODES; + struct typec_altmode_desc desc; + struct ucsi_altmode alt; + struct ucsi_altmode orig[UCSI_MAX_ALTMODES]; + struct ucsi_altmode updated[UCSI_MAX_ALTMODES]; + struct ucsi *ucsi = con->ucsi; + bool multi_dp = false; + u64 command; + int ret; + int len; + int i; + int k = 0; + + if (recipient == UCSI_RECIPIENT_CON) + max_altmodes = con->ucsi->cap.num_alt_modes; + + memset(orig, 0, sizeof(orig)); + memset(updated, 0, sizeof(updated)); + + /* First get all the alternate modes */ + for (i = 0; i < max_altmodes; i++) { + memset(&alt, 0, sizeof(alt)); + command = UCSI_GET_ALTERNATE_MODES; + command |= UCSI_GET_ALTMODE_RECIPIENT(recipient); + command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_ALTMODE_OFFSET(i); + len = ucsi_run_command(con->ucsi, command, &alt, sizeof(alt)); + /* + * We are collecting all altmodes first and then registering. + * Some type-C device will return zero length data beyond last + * alternate modes. We should not return if length is zero. + */ + if (len < 0) + return len; + + /* We got all altmodes, now break out and register them */ + if (!len || !alt.svid) + break; + + orig[k].mid = alt.mid; + orig[k].svid = alt.svid; + k++; + } + /* + * Update the original altmode table as some ppms may report + * multiple DP altmodes. + */ + if (recipient == UCSI_RECIPIENT_CON) + multi_dp = ucsi->ops->update_altmodes(ucsi, orig, updated); + + /* now register altmodes */ + for (i = 0; i < max_altmodes; i++) { + memset(&desc, 0, sizeof(desc)); + if (multi_dp && recipient == UCSI_RECIPIENT_CON) { + desc.svid = updated[i].svid; + desc.vdo = updated[i].mid; + } else { + desc.svid = orig[i].svid; + desc.vdo = orig[i].mid; + } + desc.roles = TYPEC_PORT_DRD; + + if (!desc.svid) + return 0; + + ret = ucsi_register_altmode(con, &desc, recipient); + if (ret) + return ret; + } + + return 0; +} + static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) { int max_altmodes = UCSI_MAX_ALTMODES; @@ -336,6 +412,9 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) if (recipient == UCSI_RECIPIENT_SOP && con->partner_altmode[0]) return 0; + if (con->ucsi->ops->update_altmodes) + return ucsi_register_altmodes_nvidia(con, recipient); + if (recipient == UCSI_RECIPIENT_CON) max_altmodes = con->ucsi->cap.num_alt_modes; @@ -589,6 +668,11 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num) { struct ucsi_connector *con = &ucsi->connector[num - 1]; + if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) { + dev_dbg(ucsi->dev, "Bogus connector change event\n"); + return; + } + if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags)) schedule_work(&con->work); } @@ -656,7 +740,7 @@ static int ucsi_role_cmd(struct ucsi_connector *con, u64 command) ucsi_reset_ppm(con->ucsi); mutex_unlock(&con->ucsi->ppm_lock); - c = UCSI_SET_NOTIFICATION_ENABLE | UCSI_ENABLE_NTFY_ALL; + c = UCSI_SET_NOTIFICATION_ENABLE | con->ucsi->ntfy; ucsi_send_command(con->ucsi, c, NULL, 0); ucsi_reset_connector(con, true); @@ -890,8 +974,8 @@ int ucsi_init(struct ucsi *ucsi) } /* Enable basic notifications */ - command = UCSI_SET_NOTIFICATION_ENABLE; - command |= UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; + ucsi->ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; ret = ucsi_run_command(ucsi, command, NULL, 0); if (ret < 0) goto err_reset; @@ -923,7 +1007,8 @@ int ucsi_init(struct ucsi *ucsi) } /* Enable all notifications */ - command = UCSI_SET_NOTIFICATION_ENABLE | UCSI_ENABLE_NTFY_ALL; + ucsi->ntfy = UCSI_ENABLE_NTFY_ALL; + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; ret = ucsi_run_command(ucsi, command, NULL, 0); if (ret < 0) goto err_unregister; diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 831c9470bdc1..e434b9c9a9eb 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -11,6 +11,7 @@ /* -------------------------------------------------------------------------- */ struct ucsi; +struct ucsi_altmode; /* UCSI offsets (Bytes) */ #define UCSI_VERSION 0 @@ -35,6 +36,7 @@ struct ucsi; * @read: Read operation * @sync_write: Blocking write operation * @async_write: Non-blocking write operation + * @update_altmodes: Squashes duplicate DP altmodes * * Read and write routines for UCSI interface. @sync_write must wait for the * Command Completion Event from the PPM before returning, and @async_write must @@ -47,6 +49,8 @@ struct ucsi_operations { const void *val, size_t val_len); int (*async_write)(struct ucsi *ucsi, unsigned int offset, const void *val, size_t val_len); + bool (*update_altmodes)(struct ucsi *ucsi, struct ucsi_altmode *orig, + struct ucsi_altmode *updated); }; struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops); @@ -82,6 +86,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_GET_ERROR_STATUS 0x13 #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) +#define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) /* CONNECTOR_RESET command bits */ #define UCSI_CONNECTOR_RESET_HARD BIT(23) /* Deprecated in v1.1 */ @@ -140,6 +145,12 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_ERROR_PPM_POLICY_CONFLICT BIT(11) #define UCSI_ERROR_SWAP_REJECTED BIT(12) +#define UCSI_SET_NEW_CAM_ENTER(x) (((x) >> 23) & 0x1) +#define UCSI_SET_NEW_CAM_GET_AM(x) (((x) >> 24) & 0xff) +#define UCSI_SET_NEW_CAM_AM_MASK (0xff << 24) +#define UCSI_SET_NEW_CAM_SET_AM(x) (((x) & 0xff) << 24) +#define UCSI_CMD_CONNECTOR_MASK (0x7) + /* Data structure filled by PPM in response to GET_CAPABILITY command. */ struct ucsi_capability { u32 attributes; @@ -269,6 +280,9 @@ struct ucsi { /* PPM Communication lock */ struct mutex ppm_lock; + /* The latest "Notification Enable" bits (SET_NOTIFICATION_ENABLE) */ + u64 ntfy; + /* PPM communication flags */ unsigned long flags; #define EVENT_PENDING 0 diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 3370b3fc37b1..a5b8530490db 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/usb/typec_dp.h> #include <asm/unaligned.h> #include "ucsi.h" @@ -173,6 +174,15 @@ struct ccg_resp { u8 length; }; +struct ucsi_ccg_altmode { + u16 svid; + u32 mid; + u8 linked_idx; + u8 active_idx; +#define UCSI_MULTI_DP_INDEX (0xff) + bool checked; +} __packed; + struct ucsi_ccg { struct device *dev; struct ucsi *ucsi; @@ -198,6 +208,11 @@ struct ucsi_ccg { struct work_struct pm_work; struct completion complete; + + u64 last_cmd_sent; + bool has_multiple_dp; + struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES]; + struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES]; }; static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) @@ -319,12 +334,169 @@ static int ucsi_ccg_init(struct ucsi_ccg *uc) return -ETIMEDOUT; } +static void ucsi_ccg_update_get_current_cam_cmd(struct ucsi_ccg *uc, u8 *data) +{ + u8 cam, new_cam; + + cam = data[0]; + new_cam = uc->orig[cam].linked_idx; + uc->updated[new_cam].active_idx = cam; + data[0] = new_cam; +} + +static bool ucsi_ccg_update_altmodes(struct ucsi *ucsi, + struct ucsi_altmode *orig, + struct ucsi_altmode *updated) +{ + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + struct ucsi_ccg_altmode *alt, *new_alt; + int i, j, k = 0; + bool found = false; + + alt = uc->orig; + new_alt = uc->updated; + memset(uc->updated, 0, sizeof(uc->updated)); + + /* + * Copy original connector altmodes to new structure. + * We need this before second loop since second loop + * checks for duplicate altmodes. + */ + for (i = 0; i < UCSI_MAX_ALTMODES; i++) { + alt[i].svid = orig[i].svid; + alt[i].mid = orig[i].mid; + if (!alt[i].svid) + break; + } + + for (i = 0; i < UCSI_MAX_ALTMODES; i++) { + if (!alt[i].svid) + break; + + /* already checked and considered */ + if (alt[i].checked) + continue; + + if (!DP_CONF_GET_PIN_ASSIGN(alt[i].mid)) { + /* Found Non DP altmode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid; + new_alt[k].linked_idx = i; + alt[i].linked_idx = k; + updated[k].svid = new_alt[k].svid; + updated[k].mid = new_alt[k].mid; + k++; + continue; + } + + for (j = i + 1; j < UCSI_MAX_ALTMODES; j++) { + if (alt[i].svid != alt[j].svid || + !DP_CONF_GET_PIN_ASSIGN(alt[j].mid)) { + continue; + } else { + /* Found duplicate DP mode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid | alt[j].mid; + new_alt[k].linked_idx = UCSI_MULTI_DP_INDEX; + alt[i].linked_idx = k; + alt[j].linked_idx = k; + alt[j].checked = true; + found = true; + } + } + if (found) { + uc->has_multiple_dp = true; + } else { + /* Didn't find any duplicate DP altmode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid; + new_alt[k].linked_idx = i; + alt[i].linked_idx = k; + } + updated[k].svid = new_alt[k].svid; + updated[k].mid = new_alt[k].mid; + k++; + } + return found; +} + +static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc, + struct ucsi_connector *con, + u64 *cmd) +{ + struct ucsi_ccg_altmode *new_port, *port; + struct typec_altmode *alt = NULL; + u8 new_cam, cam, pin; + bool enter_new_mode; + int i, j, k = 0xff; + + port = uc->orig; + new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd); + new_port = &uc->updated[new_cam]; + cam = new_port->linked_idx; + enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd); + + /* + * If CAM is UCSI_MULTI_DP_INDEX then this is DP altmode + * with multiple DP mode. Find out CAM for best pin assignment + * among all DP mode. Priorite pin E->D->C after making sure + * the partner supports that pin. + */ + if (cam == UCSI_MULTI_DP_INDEX) { + if (enter_new_mode) { + for (i = 0; con->partner_altmode[i]; i++) { + alt = con->partner_altmode[i]; + if (alt->svid == new_port->svid) + break; + } + /* + * alt will always be non NULL since this is + * UCSI_SET_NEW_CAM command and so there will be + * at least one con->partner_altmode[i] with svid + * matching with new_port->svid. + */ + for (j = 0; port[j].svid; j++) { + pin = DP_CONF_GET_PIN_ASSIGN(port[j].mid); + if (alt && port[j].svid == alt->svid && + (pin & DP_CONF_GET_PIN_ASSIGN(alt->vdo))) { + /* prioritize pin E->D->C */ + if (k == 0xff || (k != 0xff && pin > + DP_CONF_GET_PIN_ASSIGN(port[k].mid)) + ) { + k = j; + } + } + } + cam = k; + new_port->active_idx = cam; + } else { + cam = new_port->active_idx; + } + } + *cmd &= ~UCSI_SET_NEW_CAM_AM_MASK; + *cmd |= UCSI_SET_NEW_CAM_SET_AM(cam); +} + static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t val_len) { + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + int ret; u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); - return ccg_read(ucsi_get_drvdata(ucsi), reg, val, val_len); + ret = ccg_read(uc, reg, val, val_len); + if (ret) + return ret; + + if (offset == UCSI_MESSAGE_IN) { + if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_GET_CURRENT_CAM && + uc->has_multiple_dp) { + ucsi_ccg_update_get_current_cam_cmd(uc, (u8 *)val); + } + uc->last_cmd_sent = 0; + } + + return ret; } static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset, @@ -339,12 +511,26 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset, const void *val, size_t val_len) { struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + struct ucsi_connector *con; + int con_index; int ret; mutex_lock(&uc->lock); pm_runtime_get_sync(uc->dev); set_bit(DEV_CMD_PENDING, &uc->flags); + if (offset == UCSI_CONTROL && val_len == sizeof(uc->last_cmd_sent)) { + uc->last_cmd_sent = *(u64 *)val; + + if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_SET_NEW_CAM && + uc->has_multiple_dp) { + con_index = (uc->last_cmd_sent >> 16) & + UCSI_CMD_CONNECTOR_MASK; + con = &uc->ucsi->connector[con_index - 1]; + ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val); + } + } + ret = ucsi_ccg_async_write(ucsi, offset, val, val_len); if (ret) goto err_clear_bit; @@ -363,7 +549,8 @@ err_clear_bit: static const struct ucsi_operations ucsi_ccg_ops = { .read = ucsi_ccg_read, .sync_write = ucsi_ccg_sync_write, - .async_write = ucsi_ccg_async_write + .async_write = ucsi_ccg_async_write, + .update_altmodes = ucsi_ccg_update_altmodes }; static irqreturn_t ccg_irq_handler(int irq, void *data) |