Merge tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown: "Another fairly quiet release, some new drivers with generic handling for minor features but nothing that makes a substantial difference outside of the subsystem or for most boards: - support for a bunch of new parameters which are present on enough regulators to be worth having generic handling for in the framework. - fixes for some issues with printing constraints during boot which should probably have gone in for v4.1 but didn't. - new drivers for Dialog DA9062, Maxim MAX77621 and Qualcomm SPMI regulators" * tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits) regulator: qcom_spmi: Fix calculating number of voltages regulator: qcom_spmi: Add missing braces for aligned code regulator: fix simple_return.cocci warnings regulator: Add QCOM SPMI regulator driver regulator: Add docbook for soft start regulator: Add input current limit support regulator: Add soft start support regulator: Add pull down support regulator: Add system_load constraint regulator: max8973: Fix up ramp_delay for MAX8973_RAMP_25mV_PER_US case regulator: core: replace sprintf with scnprintf regulator: core: fix constraints output buffer regulator: core: Don't corrupt display when printing uV offsets regulator: max8973: add support for MAX77621 regulator: max8973: configure ramp delay through callback regulator: pwm-regulator: Diffientiate between dev (device) and rdev (regulator_dev) regulator: pwm-regulator: Remove superfluous is_enabled check regulator: pwm-regulator: Remove unnecessary descriptor attribute from ddata regulator: core: Don't spew backtraces on duplicate sysfs regulator: da9063: Fix up irq leak ...
author: Linus Torvalds 2015-06-23 17:30:20 -0700
committer: Linus Torvalds 2015-06-23 17:30:20 -0700
commit: 7fe0bf908d4f8f7d134cab280cac64fe65997ac1 (patch)
tree: e14095fcaadd69df93b7a0a792001675582a1a1b /drivers
parent: 5a602e157a9d91d5ce98d07c404097edba8ec9f3 (diff)
parent: 733ada000f2c9618ccbac7b9ba146113f0a6675b (diff)
22 files changed, 2727 insertions, 293 deletions
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index c3d15427adc7..b100a63ff3b3 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -404,7 +404,7 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id pm8607_regulator_driver_ids[] = {
+static const struct platform_device_id pm8607_regulator_driver_ids[] = {
 	{
 		.name	= "88pm860x-regulator",
 		.driver_data	= 0,
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a6f116aa5235..bef3bde6971b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -178,6 +178,16 @@ config REGULATOR_DA9055
 	  This driver can also be built as a module. If so, the module
 	  will be called da9055-regulator.
 
+config REGULATOR_DA9062
+	tristate "Dialog Semiconductor DA9062 regulators"
+	depends on MFD_DA9062
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  DA9062 PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9062-regulator.
+
 config REGULATOR_DA9063
 	tristate "Dialog Semiconductor DA9063 regulators"
 	depends on MFD_DA9063
@@ -233,7 +243,7 @@ config REGULATOR_FAN53555
 
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This driver provides support for regulators that can be
 	  controlled via gpios.
@@ -512,6 +522,17 @@ config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_SPMI
+	tristate "Qualcomm SPMI regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators found in Qualcomm SPMI PMICs.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm SPMI PMICs as a module. The module will be named
+	  "qcom_spmi-regulator".
+
 config REGULATOR_RC5T583
 	tristate "RICOH RC5T583 Power regulators"
 	depends on MFD_RC5T583
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2c4da15e1545..91bf76267404 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
+obj-$(CONFIG_REGULATOR_DA9062)	+= da9062-regulator.o
 obj-$(CONFIG_REGULATOR_DA9063)	+= da9063-regulator.o
 obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o
 obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
@@ -61,6 +62,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index a1d07d347c20..90941632efa9 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -178,6 +178,16 @@ static const struct regulator_init_data arizona_ldo1_default = {
 	.num_consumer_supplies = 1,
 };
 
+static const struct regulator_init_data arizona_ldo1_wm5110 = {
+	.constraints = {
+		.min_uV = 1175000,
+		.max_uV = 1200000,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+				  REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = 1,
+};
+
 static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
 				     struct regulator_config *config,
 				     const struct regulator_desc *desc)
@@ -243,6 +253,11 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 		desc = &arizona_ldo1_hc;
 		ldo1->init_data = arizona_ldo1_dvfs;
 		break;
+	case WM5110:
+	case WM8280:
+		desc = &arizona_ldo1;
+		ldo1->init_data = arizona_ldo1_wm5110;
+		break;
 	default:
 		desc = &arizona_ldo1;
 		ldo1->init_data = arizona_ldo1_default;
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 443eaab933fc..c9f72019bd68 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -678,6 +678,8 @@ static int drms_uA_update(struct regulator_dev *rdev)
 	list_for_each_entry(sibling, &rdev->consumer_list, list)
 		current_uA += sibling->uA_load;
 
+	current_uA += rdev->constraints->system_load;
+
 	if (rdev->desc->ops->set_load) {
 		/* set the optimum mode for our new total regulator load */
 		err = rdev->desc->ops->set_load(rdev, current_uA);
@@ -779,59 +781,64 @@ static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
 static void print_constraints(struct regulator_dev *rdev)
 {
 	struct regulation_constraints *constraints = rdev->constraints;
-	char buf[80] = "";
+	char buf[160] = "";
+	size_t len = sizeof(buf) - 1;
 	int count = 0;
 	int ret;
 
 	if (constraints->min_uV && constraints->max_uV) {
 		if (constraints->min_uV == constraints->max_uV)
-			count += sprintf(buf + count, "%d mV ",
-					 constraints->min_uV / 1000);
+			count += scnprintf(buf + count, len - count, "%d mV ",
+					   constraints->min_uV / 1000);
 		else
-			count += sprintf(buf + count, "%d <--> %d mV ",
-					 constraints->min_uV / 1000,
-					 constraints->max_uV / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "%d <--> %d mV ",
+					   constraints->min_uV / 1000,
+					   constraints->max_uV / 1000);
 	}
 
 	if (!constraints->min_uV ||
 	    constraints->min_uV != constraints->max_uV) {
 		ret = _regulator_get_voltage(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d mV ", ret / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "at %d mV ", ret / 1000);
 	}
 
 	if (constraints->uV_offset)
-		count += sprintf(buf, "%dmV offset ",
-				 constraints->uV_offset / 1000);
+		count += scnprintf(buf + count, len - count, "%dmV offset ",
+				   constraints->uV_offset / 1000);
 
 	if (constraints->min_uA && constraints->max_uA) {
 		if (constraints->min_uA == constraints->max_uA)
-			count += sprintf(buf + count, "%d mA ",
-					 constraints->min_uA / 1000);
+			count += scnprintf(buf + count, len - count, "%d mA ",
+					   constraints->min_uA / 1000);
 		else
-			count += sprintf(buf + count, "%d <--> %d mA ",
-					 constraints->min_uA / 1000,
-					 constraints->max_uA / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "%d <--> %d mA ",
+					   constraints->min_uA / 1000,
+					   constraints->max_uA / 1000);
 	}
 
 	if (!constraints->min_uA ||
 	    constraints->min_uA != constraints->max_uA) {
 		ret = _regulator_get_current_limit(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d mA ", ret / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "at %d mA ", ret / 1000);
 	}
 
 	if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
-		count += sprintf(buf + count, "fast ");
+		count += scnprintf(buf + count, len - count, "fast ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
-		count += sprintf(buf + count, "normal ");
+		count += scnprintf(buf + count, len - count, "normal ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
-		count += sprintf(buf + count, "idle ");
+		count += scnprintf(buf + count, len - count, "idle ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
-		count += sprintf(buf + count, "standby");
+		count += scnprintf(buf + count, len - count, "standby");
 
 	if (!count)
-		sprintf(buf, "no parameters");
+		scnprintf(buf, len, "no parameters");
 
 	rdev_dbg(rdev, "%s\n", buf);
 
@@ -1006,6 +1013,15 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 	if (ret != 0)
 		goto out;
 
+	if (rdev->constraints->ilim_uA && ops->set_input_current_limit) {
+		ret = ops->set_input_current_limit(rdev,
+						   rdev->constraints->ilim_uA);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set input limit\n");
+			goto out;
+		}
+	}
+
 	/* do we need to setup our suspend state */
 	if (rdev->constraints->initial_state) {
 		ret = suspend_prepare(rdev, rdev->constraints->initial_state);
@@ -1049,6 +1065,22 @@ static int set_machine_constraints(struct regulator_dev *rdev,
 		}
 	}
 
+	if (rdev->constraints->pull_down && ops->set_pull_down) {
+		ret = ops->set_pull_down(rdev);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set pull down\n");
+			goto out;
+		}
+	}
+
+	if (rdev->constraints->soft_start && ops->set_soft_start) {
+		ret = ops->set_soft_start(rdev);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set soft start\n");
+			goto out;
+		}
+	}
+
 	print_constraints(rdev);
 	return 0;
 out:
@@ -1192,10 +1224,10 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 		if (regulator->supply_name == NULL)
 			goto overflow_err;
 
-		err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
+		err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj,
 					buf);
 		if (err) {
-			rdev_warn(rdev, "could not add device link %s err %d\n",
+			rdev_dbg(rdev, "could not add device link %s err %d\n",
 				  dev->kobj.name, err);
 			/* non-fatal */
 		}
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
new file mode 100644
index 000000000000..dd76da09b3c7
--- /dev/null
+++ b/drivers/regulator/da9062-regulator.c
@@ -0,0 +1,842 @@
+/*
+ * da9062-regulator.c - REGULATOR device driver for DA9062
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/da9062/core.h>
+#include <linux/mfd/da9062/registers.h>
+
+/* Regulator IDs */
+enum {
+	DA9062_ID_BUCK1,
+	DA9062_ID_BUCK2,
+	DA9062_ID_BUCK3,
+	DA9062_ID_BUCK4,
+	DA9062_ID_LDO1,
+	DA9062_ID_LDO2,
+	DA9062_ID_LDO3,
+	DA9062_ID_LDO4,
+	DA9062_MAX_REGULATORS,
+};
+
+/* Regulator capabilities and registers description */
+struct da9062_regulator_info {
+	struct regulator_desc desc;
+	/* Current limiting */
+	unsigned int n_current_limits;
+	const int *current_limits;
+	/* Main register fields */
+	struct reg_field mode;
+	struct reg_field suspend;
+	struct reg_field sleep;
+	struct reg_field suspend_sleep;
+	unsigned int suspend_vsel_reg;
+	struct reg_field ilimit;
+	/* Event detection bit */
+	struct reg_field oc_event;
+};
+
+/* Single regulator settings */
+struct da9062_regulator {
+	struct regulator_desc			desc;
+	struct regulator_dev			*rdev;
+	struct da9062				*hw;
+	const struct da9062_regulator_info	*info;
+
+	struct regmap_field			*mode;
+	struct regmap_field			*suspend;
+	struct regmap_field			*sleep;
+	struct regmap_field			*suspend_sleep;
+	struct regmap_field			*ilimit;
+};
+
+/* Encapsulates all information for the regulators driver */
+struct da9062_regulators {
+	int					irq_ldo_lim;
+	unsigned				n_regulators;
+	/* Array size to be defined during init. Keep at end. */
+	struct da9062_regulator			regulator[0];
+};
+
+/* BUCK modes */
+enum {
+	BUCK_MODE_MANUAL,	/* 0 */
+	BUCK_MODE_SLEEP,	/* 1 */
+	BUCK_MODE_SYNC,		/* 2 */
+	BUCK_MODE_AUTO		/* 3 */
+};
+
+/* Regulator operations */
+
+/* Current limits array (in uA) BUCK1 and BUCK3.
+   Entry indexes corresponds to register values. */
+static const int da9062_buck_a_limits[] = {
+	 500000,  600000,  700000,  800000,  900000, 1000000, 1100000, 1200000,
+	1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
+};
+
+/* Current limits array (in uA) for BUCK2.
+   Entry indexes corresponds to register values. */
+static const int da9062_buck_b_limits[] = {
+	1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
+	2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
+};
+
+static int da9062_set_current_limit(struct regulator_dev *rdev,
+				    int min_ua, int max_ua)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	int n, tval;
+
+	for (n = 0; n < rinfo->n_current_limits; n++) {
+		tval = rinfo->current_limits[n];
+		if (tval >= min_ua && tval <= max_ua)
+			return regmap_field_write(regl->ilimit, n);
+	}
+
+	return -EINVAL;
+}
+
+static int da9062_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	unsigned int sel;
+	int ret;
+
+	ret = regmap_field_read(regl->ilimit, &sel);
+	if (ret < 0)
+		return ret;
+
+	if (sel >= rinfo->n_current_limits)
+		sel = rinfo->n_current_limits - 1;
+
+	return rinfo->current_limits[sel];
+}
+
+static int da9062_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->mode, val);
+}
+
+/*
+ * Bucks use single mode register field for normal operation
+ * and suspend state.
+ * There are 3 modes to map to: FAST, NORMAL, and STANDBY.
+ */
+
+static unsigned da9062_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	struct regmap_field *field;
+	unsigned int val, mode = 0;
+	int ret;
+
+	ret = regmap_field_read(regl->mode, &val);
+	if (ret < 0)
+		return ret;
+
+	switch (val) {
+	default:
+	case BUCK_MODE_MANUAL:
+		mode = REGULATOR_MODE_FAST | REGULATOR_MODE_STANDBY;
+		/* Sleep flag bit decides the mode */
+		break;
+	case BUCK_MODE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	case BUCK_MODE_SYNC:
+		return REGULATOR_MODE_FAST;
+	case BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	}
+
+	/* Detect current regulator state */
+	ret = regmap_field_read(regl->suspend, &val);
+	if (ret < 0)
+		return 0;
+
+	/* Read regulator mode from proper register, depending on state */
+	if (val)
+		field = regl->suspend_sleep;
+	else
+		field = regl->sleep;
+
+	ret = regmap_field_read(field, &val);
+	if (ret < 0)
+		return 0;
+
+	if (val)
+		mode &= REGULATOR_MODE_STANDBY;
+	else
+		mode &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_FAST;
+
+	return mode;
+}
+
+/*
+ * LDOs use sleep flags - one for normal and one for suspend state.
+ * There are 2 modes to map to: NORMAL and STANDBY (sleep) for each state.
+ */
+
+static int da9062_ldo_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->sleep, val);
+}
+
+static unsigned da9062_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	struct regmap_field *field;
+	int ret, val;
+
+	/* Detect current regulator state */
+	ret = regmap_field_read(regl->suspend, &val);
+	if (ret < 0)
+		return 0;
+
+	/* Read regulator mode from proper register, depending on state */
+	if (val)
+		field = regl->suspend_sleep;
+	else
+		field = regl->sleep;
+
+	ret = regmap_field_read(field, &val);
+	if (ret < 0)
+		return 0;
+
+	if (val)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int da9062_buck_get_status(struct regulator_dev *rdev)
+{
+	int ret = regulator_is_enabled_regmap(rdev);
+
+	if (ret == 0) {
+		ret = REGULATOR_STATUS_OFF;
+	} else if (ret > 0) {
+		ret = da9062_buck_get_mode(rdev);
+		if (ret > 0)
+			ret = regulator_mode_to_status(ret);
+		else if (ret == 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int da9062_ldo_get_status(struct regulator_dev *rdev)
+{
+	int ret = regulator_is_enabled_regmap(rdev);
+
+	if (ret == 0) {
+		ret = REGULATOR_STATUS_OFF;
+	} else if (ret > 0) {
+		ret = da9062_ldo_get_mode(rdev);
+		if (ret > 0)
+			ret = regulator_mode_to_status(ret);
+		else if (ret == 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int da9062_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	const struct da9062_regulator_info *rinfo = regl->info;
+	int ret, sel;
+
+	sel = regulator_map_voltage_linear(rdev, uv, uv);
+	if (sel < 0)
+		return sel;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+
+	ret = regmap_update_bits(regl->hw->regmap, rinfo->suspend_vsel_reg,
+				 rdev->desc->vsel_mask, sel);
+
+	return ret;
+}
+
+static int da9062_suspend_enable(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+
+	return regmap_field_write(regl->suspend, 1);
+}
+
+static int da9062_suspend_disable(struct regulator_dev *rdev)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+
+	return regmap_field_write(regl->suspend, 0);
+}
+
+static int da9062_buck_set_suspend_mode(struct regulator_dev *rdev,
+					unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->mode, val);
+}
+
+static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev,
+						unsigned mode)
+{
+	struct da9062_regulator *regl = rdev_get_drvdata(rdev);
+	unsigned val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_field_write(regl->suspend_sleep, val);
+}
+
+static struct regulator_ops da9062_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_current_limit	= da9062_set_current_limit,
+	.get_current_limit	= da9062_get_current_limit,
+	.set_mode		= da9062_buck_set_mode,
+	.get_mode		= da9062_buck_get_mode,
+	.get_status		= da9062_buck_get_status,
+	.set_suspend_voltage	= da9062_set_suspend_voltage,
+	.set_suspend_enable	= da9062_suspend_enable,
+	.set_suspend_disable	= da9062_suspend_disable,
+	.set_suspend_mode	= da9062_buck_set_suspend_mode,
+};
+
+static struct regulator_ops da9062_ldo_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_mode		= da9062_ldo_set_mode,
+	.get_mode		= da9062_ldo_get_mode,
+	.get_status		= da9062_ldo_get_status,
+	.set_suspend_voltage	= da9062_set_suspend_voltage,
+	.set_suspend_enable	= da9062_suspend_enable,
+	.set_suspend_disable	= da9062_suspend_disable,
+	.set_suspend_mode	= da9062_ldo_set_suspend_mode,
+};
+
+/* Regulator information */
+static const struct da9062_regulator_info local_regulator_info[] = {
+	{
+		.desc.id = DA9062_ID_BUCK1,
+		.desc.name = "DA9062 BUCK1",
+		.desc.of_match = of_match_ptr("buck1"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK1_CONT,
+		.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK1_A,
+		.desc.vsel_mask = DA9062AA_VBUCK1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK1_A,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK1_B,
+		.mode = REG_FIELD(DA9062AA_BUCK1_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK2,
+		.desc.name = "DA9062 BUCK2",
+		.desc.of_match = of_match_ptr("buck2"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK2_CONT,
+		.desc.enable_mask = DA9062AA_BUCK2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK2_A,
+		.desc.vsel_mask = DA9062AA_VBUCK2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK2_A,
+			__builtin_ffs((int)DA9062AA_BUCK2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK2_B,
+			__builtin_ffs((int)DA9062AA_BUCK2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK2_B,
+		.mode = REG_FIELD(DA9062AA_BUCK2_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK2_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK2_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK3,
+		.desc.name = "DA9062 BUCK3",
+		.desc.of_match = of_match_ptr("buck3"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (800) * 1000,
+		.desc.uV_step = (20) * 1000,
+		.desc.n_voltages = ((3340) - (800))/(20) + 1,
+		.current_limits = da9062_buck_b_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+		.desc.enable_reg = DA9062AA_BUCK3_CONT,
+		.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK3_A,
+		.desc.vsel_mask = DA9062AA_VBUCK3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK3_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK3_B,
+		.mode = REG_FIELD(DA9062AA_BUCK3_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_BUCK4,
+		.desc.name = "DA9062 BUCK4",
+		.desc.of_match = of_match_ptr("buck4"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (530) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1800) - (530))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK4_CONT,
+		.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK4_A,
+		.desc.vsel_mask = DA9062AA_VBUCK4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK4_A,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK4_B,
+		.mode = REG_FIELD(DA9062AA_BUCK4_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO1,
+		.desc.name = "DA9062 LDO1",
+		.desc.of_match = of_match_ptr("ldo1"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO1_CONT,
+		.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO1_A,
+		.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO1_A,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO1_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO2,
+		.desc.name = "DA9062 LDO2",
+		.desc.of_match = of_match_ptr("ldo2"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (600))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO2_CONT,
+		.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO2_A,
+		.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO2_A,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO2_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO3,
+		.desc.name = "DA9062 LDO3",
+		.desc.of_match = of_match_ptr("ldo3"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO3_CONT,
+		.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO3_A,
+		.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO3_A,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO3_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9062_ID_LDO4,
+		.desc.name = "DA9062 LDO4",
+		.desc.of_match = of_match_ptr("ldo4"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO4_CONT,
+		.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO4_A,
+		.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO4_A,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO4_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1),
+	},
+};
+
+/* Regulator interrupt handlers */
+static irqreturn_t da9062_ldo_lim_event(int irq, void *data)
+{
+	struct da9062_regulators *regulators = data;
+	struct da9062 *hw = regulators->regulator[0].hw;
+	struct da9062_regulator *regl;
+	int handled = IRQ_NONE;
+	int bits, i, ret;
+
+	ret = regmap_read(hw->regmap, DA9062AA_STATUS_D, &bits);
+	if (ret < 0) {
+		dev_err(hw->dev,
+			"Failed to read LDO overcurrent indicator\n");
+		goto ldo_lim_error;
+	}
+
+	for (i = regulators->n_regulators - 1; i >= 0; i--) {
+		regl = &regulators->regulator[i];
+		if (regl->info->oc_event.reg != DA9062AA_STATUS_D)
+			continue;
+
+		if (BIT(regl->info->oc_event.lsb) & bits) {
+			regulator_notifier_call_chain(regl->rdev,
+					REGULATOR_EVENT_OVER_CURRENT, NULL);
+			handled = IRQ_HANDLED;
+		}
+	}
+
+ldo_lim_error:
+	return handled;
+}
+
+static int da9062_regulator_probe(struct platform_device *pdev)
+{
+	struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
+	struct da9062_regulators *regulators;
+	struct da9062_regulator *regl;
+	struct regulator_config config = { };
+	int irq, n, ret;
+	size_t size;
+
+	/* Allocate memory required by usable regulators */
+	size = sizeof(struct da9062_regulators) +
+		DA9062_MAX_REGULATORS * sizeof(struct da9062_regulator);
+	regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!regulators)
+		return -ENOMEM;
+
+	regulators->n_regulators = DA9062_MAX_REGULATORS;
+	platform_set_drvdata(pdev, regulators);
+
+	n = 0;
+	while (n < regulators->n_regulators) {
+		/* Initialise regulator structure */
+		regl = &regulators->regulator[n];
+		regl->hw = chip;
+		regl->info = &local_regulator_info[n];
+		regl->desc = regl->info->desc;
+		regl->desc.type = REGULATOR_VOLTAGE;
+		regl->desc.owner = THIS_MODULE;
+
+		if (regl->info->mode.reg)
+			regl->mode = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->mode);
+		if (regl->info->suspend.reg)
+			regl->suspend = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->suspend);
+		if (regl->info->sleep.reg)
+			regl->sleep = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->sleep);
+		if (regl->info->suspend_sleep.reg)
+			regl->suspend_sleep = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->suspend_sleep);
+		if (regl->info->ilimit.reg)
+			regl->ilimit = devm_regmap_field_alloc(
+					&pdev->dev,
+					chip->regmap,
+					regl->info->ilimit);
+
+		/* Register regulator */
+		memset(&config, 0, sizeof(config));
+		config.dev = chip->dev;
+		config.driver_data = regl;
+		config.regmap = chip->regmap;
+
+		regl->rdev = devm_regulator_register(&pdev->dev, &regl->desc,
+						     &config);
+		if (IS_ERR(regl->rdev)) {
+			dev_err(&pdev->dev,
+				"Failed to register %s regulator\n",
+				regl->desc.name);
+			return PTR_ERR(regl->rdev);
+		}
+
+		n++;
+	}
+
+	/* LDOs overcurrent event support */
+	irq = platform_get_irq_byname(pdev, "LDO_LIM");
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to get IRQ.\n");
+		return irq;
+	}
+	regulators->irq_ldo_lim = irq;
+
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
+					NULL, da9062_ldo_lim_event,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"LDO_LIM", regulators);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			 "Failed to request LDO_LIM IRQ.\n");
+		regulators->irq_ldo_lim = -ENXIO;
+	}
+
+	return 0;
+}
+
+static struct platform_driver da9062_regulator_driver = {
+	.driver = {
+		.name = "da9062-regulators",
+		.owner = THIS_MODULE,
+	},
+	.probe = da9062_regulator_probe,
+};
+
+static int __init da9062_regulator_init(void)
+{
+	return platform_driver_register(&da9062_regulator_driver);
+}
+subsys_initcall(da9062_regulator_init);
+
+static void __exit da9062_regulator_cleanup(void)
+{
+	platform_driver_unregister(&da9062_regulator_driver);
+}
+module_exit(da9062_regulator_cleanup);
+
+/* Module information */
+MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
+MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9062-regulators");
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 31c2c593ae0b..aed1ad3dc964 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -117,9 +117,6 @@ struct da9063_regulator {
 
 /* Encapsulates all information for the regulators driver */
 struct da9063_regulators {
-	int					irq_ldo_lim;
-	int					irq_uvov;
-
 	unsigned				n_regulators;
 	/* Array size to be defined during init. Keep at end. */
 	struct da9063_regulator			regulator[0];
@@ -867,35 +864,23 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 		return irq;
 	}
 
-	ret = request_threaded_irq(irq,
+	ret = devm_request_threaded_irq(&pdev->dev, irq,
 				NULL, da9063_ldo_lim_event,
 				IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 				"LDO_LIM", regulators);
 	if (ret) {
-		dev_err(&pdev->dev,
-				"Failed to request LDO_LIM IRQ.\n");
-		regulators->irq_ldo_lim = -ENXIO;
+		dev_err(&pdev->dev, "Failed to request LDO_LIM IRQ.\n");
+		return ret;
 	}
 
 	return 0;
 }
 
-static int da9063_regulator_remove(struct platform_device *pdev)
-{
-	struct da9063_regulators *regulators = platform_get_drvdata(pdev);
-
-	free_irq(regulators->irq_ldo_lim, regulators);
-	free_irq(regulators->irq_uvov, regulators);
-
-	return 0;
-}
-
 static struct platform_driver da9063_regulator_driver = {
 	.driver = {
 		.name = DA9063_DRVNAME_REGULATORS,
 	},
 	.probe = da9063_regulator_probe,
-	.remove = da9063_regulator_remove,
 };
 
 static int __init da9063_regulator_init(void)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 3c25db89a021..42865681c00b 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -182,6 +182,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
 static struct regulator_ops fan53555_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 	.map_voltage = regulator_map_voltage_linear,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_suspend_voltage = fan53555_set_suspend_voltage,
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index cbc39096c78d..3bbb32680a94 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -275,7 +275,7 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev,
 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
 
 /**
- * regulator_map_voltage_linear - map_voltage() for multiple linear ranges
+ * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges
  *
  * @rdev: Regulator to operate on
  * @min_uV: Lower bound for voltage
diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 4a415d4ee463..d6773da925ba 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -419,20 +419,16 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
 	}
 
 	ret = lp8755_read(pchip, 0x0F, &regval);
-	if (ret < 0)
-		goto err_i2c;
-	pchip->irqmask = regval;
-	ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler,
-				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				   "lp8755-irq", pchip);
-	if (ret)
+	if (ret < 0) {
+		dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
 		return ret;
+	}
 
-	return ret;
-
-err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
-	return ret;
+	pchip->irqmask = regval;
+	return devm_request_threaded_irq(pchip->dev, pchip->irq, NULL,
+					 lp8755_irq_handler,
+					 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					 "lp8755-irq", pchip);
 }
 
 static const struct regmap_config lp8755_regmap = {
@@ -514,9 +510,6 @@ static int lp8755_remove(struct i2c_client *client)
 	for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
 		lp8755_write(pchip, icnt, 0x00);
 
-	if (pchip->irq != 0)
-		free_irq(pchip->irq, pchip);
-
 	return 0;
 }
 
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
index b3678d289619..b2daa6641417 100644
--- a/drivers/regulator/max14577.c
+++ b/drivers/regulator/max14577.c
@@ -100,31 +100,34 @@ static struct regulator_ops max14577_charger_ops = {
 	.set_current_limit	= max14577_reg_set_current_limit,
 };
 
+#define MAX14577_SAFEOUT_REG	{ \
+	.name		= "SAFEOUT", \
+	.of_match	= of_match_ptr("SAFEOUT"), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX14577_SAFEOUT, \
+	.ops		= &max14577_safeout_ops, \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= 1, \
+	.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE, \
+	.enable_reg	= MAX14577_REG_CONTROL2, \
+	.enable_mask	= CTRL2_SFOUTORD_MASK, \
+}
+#define MAX14577_CHARGER_REG	{ \
+	.name		= "CHARGER", \
+	.of_match	= of_match_ptr("CHARGER"), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX14577_CHARGER, \
+	.ops		= &max14577_charger_ops, \
+	.type		= REGULATOR_CURRENT, \
+	.owner		= THIS_MODULE, \
+	.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2, \
+	.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK, \
+}
+
 static const struct regulator_desc max14577_supported_regulators[] = {
-	[MAX14577_SAFEOUT] = {
-		.name		= "SAFEOUT",
-		.of_match	= of_match_ptr("SAFEOUT"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_SAFEOUT,
-		.ops		= &max14577_safeout_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= 1,
-		.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
-		.enable_reg	= MAX14577_REG_CONTROL2,
-		.enable_mask	= CTRL2_SFOUTORD_MASK,
-	},
-	[MAX14577_CHARGER] = {
-		.name		= "CHARGER",
-		.of_match	= of_match_ptr("CHARGER"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_CHARGER,
-		.ops		= &max14577_charger_ops,
-		.type		= REGULATOR_CURRENT,
-		.owner		= THIS_MODULE,
-		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,
-		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,
-	},
+	[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
+	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
 };
 
 static struct regulator_ops max77836_ldo_ops = {
@@ -138,63 +141,28 @@ static struct regulator_ops max77836_ldo_ops = {
 	/* TODO: add .set_suspend_mode */
 };
 
+#define MAX77836_LDO_REG(num)	{ \
+	.name		= "LDO" # num, \
+	.of_match	= of_match_ptr("LDO" # num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX77836_LDO ## num, \
+	.ops		= &max77836_ldo_ops, \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM, \
+	.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN, \
+	.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP, \
+	.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO ## num, \
+	.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK, \
+	.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO ## num, \
+	.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK, \
+}
+
 static const struct regulator_desc max77836_supported_regulators[] = {
-	[MAX14577_SAFEOUT] = {
-		.name		= "SAFEOUT",
-		.of_match	= of_match_ptr("SAFEOUT"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_SAFEOUT,
-		.ops		= &max14577_safeout_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= 1,
-		.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
-		.enable_reg	= MAX14577_REG_CONTROL2,
-		.enable_mask	= CTRL2_SFOUTORD_MASK,
-	},
-	[MAX14577_CHARGER] = {
-		.name		= "CHARGER",
-		.of_match	= of_match_ptr("CHARGER"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX14577_CHARGER,
-		.ops		= &max14577_charger_ops,
-		.type		= REGULATOR_CURRENT,
-		.owner		= THIS_MODULE,
-		.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2,
-		.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK,
-	},
-	[MAX77836_LDO1] = {
-		.name		= "LDO1",
-		.of_match	= of_match_ptr("LDO1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX77836_LDO1,
-		.ops		= &max77836_ldo_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
-		.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
-		.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
-		.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO1,
-		.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK,
-		.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO1,
-		.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK,
-	},
-	[MAX77836_LDO2] = {
-		.name		= "LDO2",
-		.of_match	= of_match_ptr("LDO2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id		= MAX77836_LDO2,
-		.ops		= &max77836_ldo_ops,
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
-		.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
-		.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
-		.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO2,
-		.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK,
-		.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO2,
-		.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK,
-	},
+	[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
+	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
+	[MAX77836_LDO1] = MAX77836_LDO_REG(1),
+	[MAX77836_LDO2] = MAX77836_LDO_REG(2),
 };
 
 #ifdef CONFIG_OF
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 15fb1416bfbd..17ccf365a9c0 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -2,7 +2,7 @@
  * max77686.c - Regulator driver for the Maxim 77686
  *
  * Copyright (C) 2012 Samsung Electronics
- * Chiwoong Byun <woong.byun@smasung.com>
+ * Chiwoong Byun <woong.byun@samsung.com>
  * Jonghwa Lee <jonghwa3.lee@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -88,7 +88,7 @@ enum max77686_ramp_rate {
 };
 
 struct max77686_data {
-	u64 gpio_enabled:MAX77686_REGULATORS;
+	DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
 
 	/* Array indexed by regulator id */
 	unsigned int opmode[MAX77686_REGULATORS];
@@ -121,7 +121,7 @@ static unsigned int max77686_map_normal_mode(struct max77686_data *max77686,
 	case MAX77686_BUCK8:
 	case MAX77686_BUCK9:
 	case MAX77686_LDO20 ... MAX77686_LDO22:
-		if (max77686->gpio_enabled & (1 << id))
+		if (test_bit(id, max77686->gpio_enabled))
 			return MAX77686_GPIO_CONTROL;
 	}
 
@@ -277,7 +277,7 @@ static int max77686_of_parse_cb(struct device_node *np,
 	}
 
 	if (gpio_is_valid(config->ena_gpio)) {
-		max77686->gpio_enabled |= (1 << desc->id);
+		set_bit(desc->id, max77686->gpio_enabled);
 
 		return regmap_update_bits(config->regmap, desc->enable_reg,
 					  desc->enable_mask,
diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c
index 9665a488e2f1..38722c8311a5 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693.c
@@ -35,20 +35,6 @@
 
 #define CHGIN_ILIM_STEP_20mA			20000
 
-/* CHARGER regulator ops */
-/* CHARGER regulator uses two bits for enabling */
-static int max77693_chg_is_enabled(struct regulator_dev *rdev)
-{
-	int ret;
-	unsigned int val;
-
-	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
-	if (ret)
-		return ret;
-
-	return (val & rdev->desc->enable_mask) == rdev->desc->enable_mask;
-}
-
 /*
  * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
  * 0x00, 0x01, 0x2, 0x03	= 60 mA
@@ -118,7 +104,7 @@ static struct regulator_ops max77693_safeout_ops = {
 };
 
 static struct regulator_ops max77693_charger_ops = {
-	.is_enabled		= max77693_chg_is_enabled,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.get_current_limit	= max77693_chg_get_current_limit,
@@ -155,6 +141,7 @@ static const struct regulator_desc regulators[] = {
 		.enable_reg = MAX77693_CHG_REG_CHG_CNFG_00,
 		.enable_mask = CHG_CNFG_00_CHG_MASK |
 				CHG_CNFG_00_BUCK_MASK,
+		.enable_val = CHG_CNFG_00_CHG_MASK | CHG_CNFG_00_BUCK_MASK,
 	},
 };
 
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
index c132ef527cdd..f4fd0d3cfa6e 100644
--- a/drivers/regulator/max77843.c
+++ b/drivers/regulator/max77843.c
@@ -33,21 +33,6 @@ static const unsigned int max77843_safeout_voltage_table[] = {
 	3300000,
 };
 
-static int max77843_reg_is_enabled(struct regulator_dev *rdev)
-{
-	struct regmap *regmap = rdev->regmap;
-	int ret;
-	unsigned int reg;
-
-	ret = regmap_read(regmap, rdev->desc->enable_reg, &reg);
-	if (ret) {
-		dev_err(&rdev->dev, "Fialed to read charger register\n");
-		return ret;
-	}
-
-	return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
-}
-
 static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
 {
 	struct regmap *regmap = rdev->regmap;
@@ -96,7 +81,7 @@ static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
 }
 
 static struct regulator_ops max77843_charger_ops = {
-	.is_enabled		= max77843_reg_is_enabled,
+	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.get_current_limit	= max77843_reg_get_current_limit,
@@ -112,37 +97,25 @@ static struct regulator_ops max77843_regulator_ops = {
 	.set_voltage_sel        = regulator_set_voltage_sel_regmap,
 };
 
+#define	MAX77843_SAFEOUT(num)	{ \
+	.name		= "SAFEOUT" # num, \
+	.id		= MAX77843_SAFEOUT ## num, \
+	.ops		= &max77843_regulator_ops, \
+	.of_match	= of_match_ptr("SAFEOUT" # num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table), \
+	.volt_table	= max77843_safeout_voltage_table, \
+	.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL, \
+	.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \
+	.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL, \
+	.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
+}
+
 static const struct regulator_desc max77843_supported_regulators[] = {
-	[MAX77843_SAFEOUT1] = {
-		.name		= "SAFEOUT1",
-		.id		= MAX77843_SAFEOUT1,
-		.ops		= &max77843_regulator_ops,
-		.of_match	= of_match_ptr("SAFEOUT1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type		= REGULATOR_VOLTAGE,
-		.owner		= THIS_MODULE,
-		.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table),
-		.volt_table	= max77843_safeout_voltage_table,
-		.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
-		.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
-	},
-	[MAX77843_SAFEOUT2] = {
-		.name           = "SAFEOUT2",
-		.id             = MAX77843_SAFEOUT2,
-		.ops            = &max77843_regulator_ops,
-		.of_match	= of_match_ptr("SAFEOUT2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.type           = REGULATOR_VOLTAGE,
-		.owner          = THIS_MODULE,
-		.n_voltages	= ARRAY_SIZE(max77843_safeout_voltage_table),
-		.volt_table	= max77843_safeout_voltage_table,
-		.enable_reg     = MAX77843_SYS_REG_SAFEOUTCTRL,
-		.enable_mask    = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
-		.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,
-		.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
-	},
+	[MAX77843_SAFEOUT1] = MAX77843_SAFEOUT(1),
+	[MAX77843_SAFEOUT2] = MAX77843_SAFEOUT(2),
 	[MAX77843_CHARGER] = {
 		.name		= "CHARGER",
 		.id		= MAX77843_CHARGER,
@@ -152,7 +125,8 @@ static const struct regulator_desc max77843_supported_regulators[] = {
 		.type		= REGULATOR_CURRENT,
 		.owner		= THIS_MODULE,
 		.enable_reg	= MAX77843_CHG_REG_CHG_CNFG_00,
-		.enable_mask	= MAX77843_CHG_MASK,
+		.enable_mask	= MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK,
+		.enable_val	= MAX77843_CHG_MASK | MAX77843_CHG_BUCK_MASK,
 	},
 };
 
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index c3d55c2db593..6f2bdad8b4d8 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -27,12 +27,14 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8973-regulator.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
@@ -66,6 +68,7 @@
 #define MAX8973_RAMP_25mV_PER_US			0x1
 #define MAX8973_RAMP_50mV_PER_US			0x2
 #define MAX8973_RAMP_200mV_PER_US			0x3
+#define MAX8973_RAMP_MASK				0x3
 
 /* MAX8973_CONTROL2 */
 #define MAX8973_WDTMR_ENABLE				BIT(6)
@@ -89,19 +92,25 @@
 #define MAX8973_VOLATGE_STEP				6250
 #define MAX8973_BUCK_N_VOLTAGE				0x80
 
+enum device_id {
+	MAX8973,
+	MAX77621
+};
+
 /* Maxim 8973 chip information */
 struct max8973_chip {
 	struct device *dev;
 	struct regulator_desc desc;
 	struct regmap *regmap;
 	bool enable_external_control;
+	int enable_gpio;
 	int dvs_gpio;
 	int lru_index[MAX8973_MAX_VOUT_REG];
 	int curr_vout_val[MAX8973_MAX_VOUT_REG];
 	int curr_vout_reg;
 	int curr_gpio_val;
-	bool valid_dvs_gpio;
 	struct regulator_ops ops;
+	enum device_id id;
 };
 
 /*
@@ -174,7 +183,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
 	 * If gpios are available to select the VOUT register then least
 	 * recently used register for new configuration.
 	 */
-	if (max->valid_dvs_gpio)
+	if (gpio_is_valid(max->dvs_gpio))
 		found = find_voltage_set_register(max, vsel,
 					&vout_reg, &gpio_val);
 
@@ -191,7 +200,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
 	}
 
 	/* Select proper VOUT register vio gpios */
-	if (max->valid_dvs_gpio) {
+	if (gpio_is_valid(max->dvs_gpio)) {
 		gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
 		max->curr_gpio_val = gpio_val;
 	}
@@ -242,12 +251,45 @@ static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
 		REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 }
 
+static int max8973_set_ramp_delay(struct regulator_dev *rdev,
+		int ramp_delay)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	unsigned int control;
+	int ret;
+	int ret_val;
+
+	/* Set ramp delay */
+	if (ramp_delay < 25000) {
+		control = MAX8973_RAMP_12mV_PER_US;
+		ret_val = 12000;
+	} else if (ramp_delay < 50000) {
+		control = MAX8973_RAMP_25mV_PER_US;
+		ret_val = 25000;
+	} else if (ramp_delay < 200000) {
+		control = MAX8973_RAMP_50mV_PER_US;
+		ret_val = 50000;
+	} else {
+		control = MAX8973_RAMP_200mV_PER_US;
+		ret_val = 200000;
+	}
+
+	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
+			MAX8973_RAMP_MASK, control);
+	if (ret < 0)
+		dev_err(max->dev, "register %d update failed, %d",
+				MAX8973_CONTROL1, ret);
+	return ret;
+}
+
 static const struct regulator_ops max8973_dcdc_ops = {
 	.get_voltage_sel	= max8973_dcdc_get_voltage_sel,
 	.set_voltage_sel	= max8973_dcdc_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear,
 	.set_mode		= max8973_dcdc_set_mode,
 	.get_mode		= max8973_dcdc_get_mode,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_ramp_delay		= max8973_set_ramp_delay,
 };
 
 static int max8973_init_dcdc(struct max8973_chip *max,
@@ -256,6 +298,29 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	int ret;
 	uint8_t	control1 = 0;
 	uint8_t control2 = 0;
+	unsigned int data;
+
+	ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d read failed, err = %d",
+				MAX8973_CONTROL1, ret);
+		return ret;
+	}
+	control1 = data & MAX8973_RAMP_MASK;
+	switch (control1) {
+	case MAX8973_RAMP_12mV_PER_US:
+		max->desc.ramp_delay = 12000;
+		break;
+	case MAX8973_RAMP_25mV_PER_US:
+		max->desc.ramp_delay = 25000;
+		break;
+	case MAX8973_RAMP_50mV_PER_US:
+		max->desc.ramp_delay = 50000;
+		break;
+	case MAX8973_RAMP_200mV_PER_US:
+		max->desc.ramp_delay = 200000;
+		break;
+	}
 
 	if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE)
 		control1 |= MAX8973_SNS_ENABLE;
@@ -266,28 +331,16 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE)
 		control1 |= MAX8973_AD_ENABLE;
 
-	if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE)
+	if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE) {
 		control1 |= MAX8973_BIAS_ENABLE;
+		max->desc.enable_time = 20;
+	} else {
+		max->desc.enable_time = 240;
+	}
 
 	if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
 		control1 |= MAX8973_FREQSHIFT_9PER;
 
-	/* Set ramp delay */
-	if (pdata->reg_init_data &&
-			pdata->reg_init_data->constraints.ramp_delay) {
-		if (pdata->reg_init_data->constraints.ramp_delay < 25000)
-			control1 |= MAX8973_RAMP_12mV_PER_US;
-		else if (pdata->reg_init_data->constraints.ramp_delay < 50000)
-			control1 |= MAX8973_RAMP_25mV_PER_US;
-		else if (pdata->reg_init_data->constraints.ramp_delay < 200000)
-			control1 |= MAX8973_RAMP_50mV_PER_US;
-		else
-			control1 |= MAX8973_RAMP_200mV_PER_US;
-	} else {
-		control1 |= MAX8973_RAMP_12mV_PER_US;
-		max->desc.ramp_delay = 12500;
-	}
-
 	if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
 		control2 |= MAX8973_DISCH_ENBABLE;
 
@@ -344,7 +397,7 @@ static int max8973_init_dcdc(struct max8973_chip *max,
 	}
 
 	/* If external control is enabled then disable EN bit */
-	if (max->enable_external_control) {
+	if (max->enable_external_control && (max->id == MAX8973)) {
 		ret = regmap_update_bits(max->regmap, MAX8973_VOUT,
 						MAX8973_VOUT_ENABLE, 0);
 		if (ret < 0)
@@ -361,22 +414,82 @@ static const struct regmap_config max8973_regmap_config = {
 	.cache_type		= REGCACHE_RBTREE,
 };
 
+static struct max8973_regulator_platform_data *max8973_parse_dt(
+		struct device *dev)
+{
+	struct max8973_regulator_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+	int ret;
+	u32 pval;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->enable_ext_control = of_property_read_bool(np,
+						"maxim,externally-enable");
+	pdata->enable_gpio = of_get_named_gpio(np, "maxim,enable-gpio", 0);
+	pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0);
+
+	ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
+	if (!ret)
+		pdata->dvs_def_state = pval;
+
+	if (of_property_read_bool(np, "maxim,enable-remote-sense"))
+		pdata->control_flags  |= MAX8973_CONTROL_REMOTE_SENSE_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-falling-slew-rate"))
+		pdata->control_flags  |=
+				MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-active-discharge"))
+		pdata->control_flags  |=
+				MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-frequency-shift"))
+		pdata->control_flags  |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE;
+
+	if (of_property_read_bool(np, "maxim,enable-bias-control"))
+		pdata->control_flags  |= MAX8973_BIAS_ENABLE;
+
+	return pdata;
+}
+
+static const struct of_device_id of_max8973_match_tbl[] = {
+	{ .compatible = "maxim,max8973", .data = (void *)MAX8973, },
+	{ .compatible = "maxim,max77621", .data = (void *)MAX77621, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_max8973_match_tbl);
+
 static int max8973_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct max8973_regulator_platform_data *pdata;
+	struct regulator_init_data *ridata;
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	struct max8973_chip *max;
+	bool pdata_from_dt = false;
+	unsigned int chip_id;
 	int ret;
 
 	pdata = dev_get_platdata(&client->dev);
 
-	if (!pdata && !client->dev.of_node) {
+	if (!pdata && client->dev.of_node) {
+		pdata = max8973_parse_dt(&client->dev);
+		pdata_from_dt = true;
+	}
+
+	if (!pdata) {
 		dev_err(&client->dev, "No Platform data");
 		return -EIO;
 	}
 
+	if ((pdata->dvs_gpio == -EPROBE_DEFER) ||
+		(pdata->enable_gpio == -EPROBE_DEFER))
+		return -EPROBE_DEFER;
+
 	max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
 	if (!max)
 		return -ENOMEM;
@@ -388,6 +501,27 @@ static int max8973_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	if (client->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_device(of_match_ptr(of_max8973_match_tbl),
+				&client->dev);
+		if (!match)
+			return -ENODATA;
+		max->id = (u32)((uintptr_t)match->data);
+	} else {
+		max->id = id->driver_data;
+	}
+
+	ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id);
+	if (ret < 0) {
+		dev_err(&client->dev, "register CHIPID1 read failed, %d", ret);
+		return ret;
+	}
+
+	dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n",
+			(chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);
+
 	i2c_set_clientdata(client, max);
 	max->ops = max8973_dcdc_ops;
 	max->dev = &client->dev;
@@ -400,23 +534,14 @@ static int max8973_probe(struct i2c_client *client,
 	max->desc.uV_step = MAX8973_VOLATGE_STEP;
 	max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
 
-	if (!pdata || !pdata->enable_ext_control) {
-		max->desc.enable_reg = MAX8973_VOUT;
-		max->desc.enable_mask = MAX8973_VOUT_ENABLE;
-		max->ops.enable = regulator_enable_regmap;
-		max->ops.disable = regulator_disable_regmap;
-		max->ops.is_enabled = regulator_is_enabled_regmap;
-	}
+	max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
+	max->enable_gpio = (pdata->enable_gpio) ? pdata->enable_gpio : -EINVAL;
+	max->enable_external_control = pdata->enable_ext_control;
+	max->curr_gpio_val = pdata->dvs_def_state;
+	max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
 
-	if (pdata) {
-		max->dvs_gpio = pdata->dvs_gpio;
-		max->enable_external_control = pdata->enable_ext_control;
-		max->curr_gpio_val = pdata->dvs_def_state;
-		max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
-	} else {
-		max->dvs_gpio = -EINVAL;
-		max->curr_vout_reg = MAX8973_VOUT;
-	}
+	if (gpio_is_valid(max->enable_gpio))
+		max->enable_external_control = true;
 
 	max->lru_index[0] = max->curr_vout_reg;
 
@@ -434,7 +559,6 @@ static int max8973_probe(struct i2c_client *client,
 				max->dvs_gpio, ret);
 			return ret;
 		}
-		max->valid_dvs_gpio = true;
 
 		/*
 		 * Initialize the lru index with vout_reg id
@@ -444,22 +568,64 @@ static int max8973_probe(struct i2c_client *client,
 			max->lru_index[i] = i;
 		max->lru_index[0] = max->curr_vout_reg;
 		max->lru_index[max->curr_vout_reg] = 0;
-	} else {
-		max->valid_dvs_gpio = false;
 	}
 
-	if (pdata) {
-		ret = max8973_init_dcdc(max, pdata);
-		if (ret < 0) {
-			dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
-			return ret;
+	if (pdata_from_dt)
+		pdata->reg_init_data = of_get_regulator_init_data(&client->dev,
+					client->dev.of_node, &max->desc);
+
+	ridata = pdata->reg_init_data;
+	switch (max->id) {
+	case MAX8973:
+		if (!pdata->enable_ext_control) {
+			max->desc.enable_reg = MAX8973_VOUT;
+			max->desc.enable_mask = MAX8973_VOUT_ENABLE;
+			max->ops.enable = regulator_enable_regmap;
+			max->ops.disable = regulator_disable_regmap;
+			max->ops.is_enabled = regulator_is_enabled_regmap;
+			break;
+		}
+
+		if (gpio_is_valid(max->enable_gpio)) {
+			config.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
+			if (ridata && (ridata->constraints.always_on ||
+					ridata->constraints.boot_on))
+				config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+			config.ena_gpio = max->enable_gpio;
 		}
+		break;
+
+	case MAX77621:
+		if (gpio_is_valid(max->enable_gpio)) {
+			ret = devm_gpio_request_one(&client->dev,
+					max->enable_gpio, GPIOF_OUT_INIT_HIGH,
+					"max8973-en-gpio");
+			if (ret) {
+				dev_err(&client->dev,
+					"gpio_request for gpio %d failed: %d\n",
+					max->enable_gpio, ret);
+				return ret;
+			}
+		}
+
+		max->desc.enable_reg = MAX8973_VOUT;
+		max->desc.enable_mask = MAX8973_VOUT_ENABLE;
+		max->ops.enable = regulator_enable_regmap;
+		max->ops.disable = regulator_disable_regmap;
+		max->ops.is_enabled = regulator_is_enabled_regmap;
+		break;
+	default:
+		break;
+	}
+
+	ret = max8973_init_dcdc(max, pdata);
+	if (ret < 0) {
+		dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
+		return ret;
 	}
 
 	config.dev = &client->dev;
-	config.init_data = pdata ? pdata->reg_init_data :
-		of_get_regulator_init_data(&client->dev, client->dev.of_node,
-					   &max->desc);
+	config.init_data = pdata->reg_init_data;
 	config.driver_data = max;
 	config.of_node = client->dev.of_node;
 	config.regmap = max->regmap;
@@ -476,15 +642,16 @@ static int max8973_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id max8973_id[] = {
-	{.name = "max8973",},
+	{.name = "max8973", .driver_data = MAX8973},
+	{.name = "max77621", .driver_data = MAX77621},
 	{},
 };
-
 MODULE_DEVICE_TABLE(i2c, max8973_id);
 
 static struct i2c_driver max8973_i2c_driver = {
 	.driver = {
 		.name = "max8973",
+		.of_match_table = of_max8973_match_tbl,
 		.owner = THIS_MODULE,
 	},
 	.probe = max8973_probe,
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 24e812c48d93..b1c485b24ab2 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -58,6 +58,10 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!of_property_read_u32(np, "regulator-max-microamp", &pval))
 		constraints->max_uA = pval;
 
+	if (!of_property_read_u32(np, "regulator-input-current-limit-microamp",
+				  &pval))
+		constraints->ilim_uA = pval;
+
 	/* Current change possible? */
 	if (constraints->min_uA != constraints->max_uA)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
@@ -67,6 +71,8 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!constraints->always_on) /* status change should be possible. */
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
 
+	constraints->pull_down = of_property_read_bool(np, "regulator-pull-down");
+
 	if (of_property_read_bool(np, "regulator-allow-bypass"))
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
 
@@ -82,6 +88,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!ret)
 		constraints->enable_time = pval;
 
+	constraints->soft_start = of_property_read_bool(np,
+					"regulator-soft-start");
+
 	if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) {
 		if (desc && desc->of_map_mode) {
 			ret = desc->of_map_mode(pval);
@@ -95,6 +104,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 		}
 	}
 
+	if (!of_property_read_u32(np, "regulator-system-load", &pval))
+		constraints->system_load = pval;
+
 	for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
 		switch (i) {
 		case PM_SUSPEND_MEM:
@@ -108,7 +120,7 @@ static void of_get_regulation_constraints(struct device_node *np,
 		case PM_SUSPEND_STANDBY:
 		default:
 			continue;
-		};
+		}
 
 		suspend_np = of_get_child_by_name(np, regulator_states[i]);
 		if (!suspend_np || !suspend_state)
@@ -292,7 +304,7 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 		return NULL;
 	}
 
-	for_each_child_of_node(search, child) {
+	for_each_available_child_of_node(search, child) {
 		name = of_get_property(child, "regulator-compatible", NULL);
 		if (!name)
 			name = child->name;
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 253833ae35f3..ffa96124a5e7 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -21,10 +21,8 @@
 #include <linux/pwm.h>
 
 struct pwm_regulator_data {
-	struct regulator_desc desc;
 	struct pwm_voltages *duty_cycle_table;
 	struct pwm_device *pwm;
-	bool enabled;
 	int state;
 };
 
@@ -33,17 +31,17 @@ struct pwm_voltages {
 	unsigned int dutycycle;
 };
 
-static int pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
+static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
 	return drvdata->state;
 }
 
-static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
+static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned selector)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 	unsigned int pwm_reg_period;
 	int dutycycle;
 	int ret;
@@ -55,30 +53,27 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
 
 	ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
 	if (ret) {
-		dev_err(&dev->dev, "Failed to configure PWM\n");
+		dev_err(&rdev->dev, "Failed to configure PWM\n");
 		return ret;
 	}
 
 	drvdata->state = selector;
 
-	if (!drvdata->enabled) {
-		ret = pwm_enable(drvdata->pwm);
-		if (ret) {
-			dev_err(&dev->dev, "Failed to enable PWM\n");
-			return ret;
-		}
-		drvdata->enabled = true;
+	ret = pwm_enable(drvdata->pwm);
+	if (ret) {
+		dev_err(&rdev->dev, "Failed to enable PWM\n");
+		return ret;
 	}
 
 	return 0;
 }
 
-static int pwm_regulator_list_voltage(struct regulator_dev *dev,
+static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
 				      unsigned selector)
 {
-	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
+	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
 
-	if (selector >= drvdata->desc.n_voltages)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 
 	return drvdata->duty_cycle_table[selector].uV;
@@ -91,7 +86,7 @@ static struct regulator_ops pwm_regulator_voltage_ops = {
 	.map_voltage     = regulator_map_voltage_iterate,
 };
 
-static const struct regulator_desc pwm_regulator_desc = {
+static struct regulator_desc pwm_regulator_desc = {
 	.name		= "pwm-regulator",
 	.ops		= &pwm_regulator_voltage_ops,
 	.type		= REGULATOR_VOLTAGE,
@@ -117,8 +112,6 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	if (!drvdata)
 		return -ENOMEM;
 
-	memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc));
-
 	/* determine the number of voltage-table */
 	prop = of_find_property(np, "voltage-table", &length);
 	if (!prop) {
@@ -133,7 +126,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
+	pwm_regulator_desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
 
 	drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
 						 length, GFP_KERNEL);
@@ -150,7 +143,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	}
 
 	config.init_data = of_get_regulator_init_data(&pdev->dev, np,
-						      &drvdata->desc);
+						      &pwm_regulator_desc);
 	if (!config.init_data)
 		return -ENOMEM;
 
@@ -165,10 +158,10 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	}
 
 	regulator = devm_regulator_register(&pdev->dev,
-					    &drvdata->desc, &config);
+					    &pwm_regulator_desc, &config);
 	if (IS_ERR(regulator)) {
 		dev_err(&pdev->dev, "Failed to register regulator %s\n",
-			drvdata->desc.name);
+			pwm_regulator_desc.name);
 		return PTR_ERR(regulator);
 	}
 
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
new file mode 100644
index 000000000000..850a30a95b5b
--- /dev/null
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -0,0 +1,1435 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/ktime.h>
+#include <linux/regulator/driver.h>
+#include <linux/regmap.h>
+#include <linux/list.h>
+
+/* These types correspond to unique register layouts. */
+enum spmi_regulator_logical_type {
+	SPMI_REGULATOR_LOGICAL_TYPE_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO,
+	SPMI_REGULATOR_LOGICAL_TYPE_VS,
+	SPMI_REGULATOR_LOGICAL_TYPE_BOOST,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_BOOST_BYP,
+	SPMI_REGULATOR_LOGICAL_TYPE_LN_LDO,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS,
+	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
+};
+
+enum spmi_regulator_type {
+	SPMI_REGULATOR_TYPE_BUCK		= 0x03,
+	SPMI_REGULATOR_TYPE_LDO			= 0x04,
+	SPMI_REGULATOR_TYPE_VS			= 0x05,
+	SPMI_REGULATOR_TYPE_BOOST		= 0x1b,
+	SPMI_REGULATOR_TYPE_FTS			= 0x1c,
+	SPMI_REGULATOR_TYPE_BOOST_BYP		= 0x1f,
+	SPMI_REGULATOR_TYPE_ULT_LDO		= 0x21,
+	SPMI_REGULATOR_TYPE_ULT_BUCK		= 0x22,
+};
+
+enum spmi_regulator_subtype {
+	SPMI_REGULATOR_SUBTYPE_GP_CTL		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_RF_CTL		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_N50		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_N150		= 0x02,
+	SPMI_REGULATOR_SUBTYPE_N300		= 0x03,
+	SPMI_REGULATOR_SUBTYPE_N600		= 0x04,
+	SPMI_REGULATOR_SUBTYPE_N1200		= 0x05,
+	SPMI_REGULATOR_SUBTYPE_N600_ST		= 0x06,
+	SPMI_REGULATOR_SUBTYPE_N1200_ST		= 0x07,
+	SPMI_REGULATOR_SUBTYPE_N900_ST		= 0x14,
+	SPMI_REGULATOR_SUBTYPE_N300_ST		= 0x15,
+	SPMI_REGULATOR_SUBTYPE_P50		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_P150		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_P300		= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_P600		= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_P1200		= 0x0c,
+	SPMI_REGULATOR_SUBTYPE_LN		= 0x10,
+	SPMI_REGULATOR_SUBTYPE_LV_P50		= 0x28,
+	SPMI_REGULATOR_SUBTYPE_LV_P150		= 0x29,
+	SPMI_REGULATOR_SUBTYPE_LV_P300		= 0x2a,
+	SPMI_REGULATOR_SUBTYPE_LV_P600		= 0x2b,
+	SPMI_REGULATOR_SUBTYPE_LV_P1200		= 0x2c,
+	SPMI_REGULATOR_SUBTYPE_LV_P450		= 0x2d,
+	SPMI_REGULATOR_SUBTYPE_LV100		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_LV300		= 0x02,
+	SPMI_REGULATOR_SUBTYPE_MV300		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_MV500		= 0x09,
+	SPMI_REGULATOR_SUBTYPE_HDMI		= 0x10,
+	SPMI_REGULATOR_SUBTYPE_OTG		= 0x11,
+	SPMI_REGULATOR_SUBTYPE_5V_BOOST		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_FTS_CTL		= 0x08,
+	SPMI_REGULATOR_SUBTYPE_FTS2p5_CTL	= 0x09,
+	SPMI_REGULATOR_SUBTYPE_BB_2A		= 0x01,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL1	= 0x0d,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL2	= 0x0e,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3	= 0x0f,
+	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4	= 0x10,
+};
+
+enum spmi_common_regulator_registers {
+	SPMI_COMMON_REG_DIG_MAJOR_REV		= 0x01,
+	SPMI_COMMON_REG_TYPE			= 0x04,
+	SPMI_COMMON_REG_SUBTYPE			= 0x05,
+	SPMI_COMMON_REG_VOLTAGE_RANGE		= 0x40,
+	SPMI_COMMON_REG_VOLTAGE_SET		= 0x41,
+	SPMI_COMMON_REG_MODE			= 0x45,
+	SPMI_COMMON_REG_ENABLE			= 0x46,
+	SPMI_COMMON_REG_PULL_DOWN		= 0x48,
+	SPMI_COMMON_REG_SOFT_START		= 0x4c,
+	SPMI_COMMON_REG_STEP_CTRL		= 0x61,
+};
+
+enum spmi_vs_registers {
+	SPMI_VS_REG_OCP				= 0x4a,
+	SPMI_VS_REG_SOFT_START			= 0x4c,
+};
+
+enum spmi_boost_registers {
+	SPMI_BOOST_REG_CURRENT_LIMIT		= 0x4a,
+};
+
+enum spmi_boost_byp_registers {
+	SPMI_BOOST_BYP_REG_CURRENT_LIMIT	= 0x4b,
+};
+
+/* Used for indexing into ctrl_reg.  These are offets from 0x40 */
+enum spmi_common_control_register_index {
+	SPMI_COMMON_IDX_VOLTAGE_RANGE		= 0,
+	SPMI_COMMON_IDX_VOLTAGE_SET		= 1,
+	SPMI_COMMON_IDX_MODE			= 5,
+	SPMI_COMMON_IDX_ENABLE			= 6,
+};
+
+/* Common regulator control register layout */
+#define SPMI_COMMON_ENABLE_MASK			0x80
+#define SPMI_COMMON_ENABLE			0x80
+#define SPMI_COMMON_DISABLE			0x00
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN3_MASK	0x08
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN2_MASK	0x04
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN1_MASK	0x02
+#define SPMI_COMMON_ENABLE_FOLLOW_HW_EN0_MASK	0x01
+#define SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK	0x0f
+
+/* Common regulator mode register layout */
+#define SPMI_COMMON_MODE_HPM_MASK		0x80
+#define SPMI_COMMON_MODE_AUTO_MASK		0x40
+#define SPMI_COMMON_MODE_BYPASS_MASK		0x20
+#define SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK	0x10
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN3_MASK	0x08
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN2_MASK	0x04
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN1_MASK	0x02
+#define SPMI_COMMON_MODE_FOLLOW_HW_EN0_MASK	0x01
+#define SPMI_COMMON_MODE_FOLLOW_ALL_MASK	0x1f
+
+/* Common regulator pull down control register layout */
+#define SPMI_COMMON_PULL_DOWN_ENABLE_MASK	0x80
+
+/* LDO regulator current limit control register layout */
+#define SPMI_LDO_CURRENT_LIMIT_ENABLE_MASK	0x80
+
+/* LDO regulator soft start control register layout */
+#define SPMI_LDO_SOFT_START_ENABLE_MASK		0x80
+
+/* VS regulator over current protection control register layout */
+#define SPMI_VS_OCP_OVERRIDE			0x01
+#define SPMI_VS_OCP_NO_OVERRIDE			0x00
+
+/* VS regulator soft start control register layout */
+#define SPMI_VS_SOFT_START_ENABLE_MASK		0x80
+#define SPMI_VS_SOFT_START_SEL_MASK		0x03
+
+/* Boost regulator current limit control register layout */
+#define SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK	0x80
+#define SPMI_BOOST_CURRENT_LIMIT_MASK		0x07
+
+#define SPMI_VS_OCP_DEFAULT_MAX_RETRIES		10
+#define SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS	30
+#define SPMI_VS_OCP_FALL_DELAY_US		90
+#define SPMI_VS_OCP_FAULT_DELAY_US		20000
+
+#define SPMI_FTSMPS_STEP_CTRL_STEP_MASK		0x18
+#define SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT	3
+#define SPMI_FTSMPS_STEP_CTRL_DELAY_MASK	0x07
+#define SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT	0
+
+/* Clock rate in kHz of the FTSMPS regulator reference clock. */
+#define SPMI_FTSMPS_CLOCK_RATE		19200
+
+/* Minimum voltage stepper delay for each step. */
+#define SPMI_FTSMPS_STEP_DELAY		8
+
+/*
+ * The ratio SPMI_FTSMPS_STEP_MARGIN_NUM/SPMI_FTSMPS_STEP_MARGIN_DEN is used to
+ * adjust the step rate in order to account for oscillator variance.
+ */
+#define SPMI_FTSMPS_STEP_MARGIN_NUM	4
+#define SPMI_FTSMPS_STEP_MARGIN_DEN	5
+
+/*
+ * This voltage in uV is returned by get_voltage functions when there is no way
+ * to determine the current voltage level.  It is needed because the regulator
+ * framework treats a 0 uV voltage as an error.
+ */
+#define VOLTAGE_UNKNOWN 1
+
+/* VSET value to decide the range of ULT SMPS */
+#define ULT_SMPS_RANGE_SPLIT 0x60
+
+/**
+ * struct spmi_voltage_range - regulator set point voltage mapping description
+ * @min_uV:		Minimum programmable output voltage resulting from
+ *			set point register value 0x00
+ * @max_uV:		Maximum programmable output voltage
+ * @step_uV:		Output voltage increase resulting from the set point
+ *			register value increasing by 1
+ * @set_point_min_uV:	Minimum allowed voltage
+ * @set_point_max_uV:	Maximum allowed voltage.  This may be tweaked in order
+ *			to pick which range should be used in the case of
+ *			overlapping set points.
+ * @n_voltages:		Number of preferred voltage set points present in this
+ *			range
+ * @range_sel:		Voltage range register value corresponding to this range
+ *
+ * The following relationships must be true for the values used in this struct:
+ * (max_uV - min_uV) % step_uV == 0
+ * (set_point_min_uV - min_uV) % step_uV == 0*
+ * (set_point_max_uV - min_uV) % step_uV == 0*
+ * n_voltages = (set_point_max_uV - set_point_min_uV) / step_uV + 1
+ *
+ * *Note, set_point_min_uV == set_point_max_uV == 0 is allowed in order to
+ * specify that the voltage range has meaning, but is not preferred.
+ */
+struct spmi_voltage_range {
+	int					min_uV;
+	int					max_uV;
+	int					step_uV;
+	int					set_point_min_uV;
+	int					set_point_max_uV;
+	unsigned				n_voltages;
+	u8					range_sel;
+};
+
+/*
+ * The ranges specified in the spmi_voltage_set_points struct must be listed
+ * so that range[i].set_point_max_uV < range[i+1].set_point_min_uV.
+ */
+struct spmi_voltage_set_points {
+	struct spmi_voltage_range		*range;
+	int					count;
+	unsigned				n_voltages;
+};
+
+struct spmi_regulator {
+	struct regulator_desc			desc;
+	struct device				*dev;
+	struct delayed_work			ocp_work;
+	struct regmap				*regmap;
+	struct spmi_voltage_set_points		*set_points;
+	enum spmi_regulator_logical_type	logical_type;
+	int					ocp_irq;
+	int					ocp_count;
+	int					ocp_max_retries;
+	int					ocp_retry_delay_ms;
+	int					hpm_min_load;
+	int					slew_rate;
+	ktime_t					vs_enable_time;
+	u16					base;
+	struct list_head			node;
+};
+
+struct spmi_regulator_mapping {
+	enum spmi_regulator_type		type;
+	enum spmi_regulator_subtype		subtype;
+	enum spmi_regulator_logical_type	logical_type;
+	u32					revision_min;
+	u32					revision_max;
+	struct regulator_ops			*ops;
+	struct spmi_voltage_set_points		*set_points;
+	int					hpm_min_load;
+};
+
+struct spmi_regulator_data {
+	const char			*name;
+	u16				base;
+	const char			*supply;
+	const char			*ocp;
+	u16				force_type;
+};
+
+#define SPMI_VREG(_type, _subtype, _dig_major_min, _dig_major_max, \
+		      _logical_type, _ops_val, _set_points_val, _hpm_min_load) \
+	{ \
+		.type		= SPMI_REGULATOR_TYPE_##_type, \
+		.subtype	= SPMI_REGULATOR_SUBTYPE_##_subtype, \
+		.revision_min	= _dig_major_min, \
+		.revision_max	= _dig_major_max, \
+		.logical_type	= SPMI_REGULATOR_LOGICAL_TYPE_##_logical_type, \
+		.ops		= &spmi_##_ops_val##_ops, \
+		.set_points	= &_set_points_val##_set_points, \
+		.hpm_min_load	= _hpm_min_load, \
+	}
+
+#define SPMI_VREG_VS(_subtype, _dig_major_min, _dig_major_max) \
+	{ \
+		.type		= SPMI_REGULATOR_TYPE_VS, \
+		.subtype	= SPMI_REGULATOR_SUBTYPE_##_subtype, \
+		.revision_min	= _dig_major_min, \
+		.revision_max	= _dig_major_max, \
+		.logical_type	= SPMI_REGULATOR_LOGICAL_TYPE_VS, \
+		.ops		= &spmi_vs_ops, \
+	}
+
+#define SPMI_VOLTAGE_RANGE(_range_sel, _min_uV, _set_point_min_uV, \
+			_set_point_max_uV, _max_uV, _step_uV) \
+	{ \
+		.min_uV			= _min_uV, \
+		.max_uV			= _max_uV, \
+		.set_point_min_uV	= _set_point_min_uV, \
+		.set_point_max_uV	= _set_point_max_uV, \
+		.step_uV		= _step_uV, \
+		.range_sel		= _range_sel, \
+	}
+
+#define DEFINE_SPMI_SET_POINTS(name) \
+struct spmi_voltage_set_points name##_set_points = { \
+	.range	= name##_ranges, \
+	.count	= ARRAY_SIZE(name##_ranges), \
+}
+
+/*
+ * These tables contain the physically available PMIC regulator voltage setpoint
+ * ranges.  Where two ranges overlap in hardware, one of the ranges is trimmed
+ * to ensure that the setpoints available to software are monotonically
+ * increasing and unique.  The set_voltage callback functions expect these
+ * properties to hold.
+ */
+static struct spmi_voltage_range pldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(3, 1500000, 1550000, 3075000, 3075000, 25000),
+	SPMI_VOLTAGE_RANGE(4, 1750000, 3100000, 4900000, 4900000, 50000),
+};
+
+static struct spmi_voltage_range nldo1_ranges[] = {
+	SPMI_VOLTAGE_RANGE(2,  750000,  750000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range nldo2_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,       0,       0, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  375000,  375000,  768750,  768750,  6250),
+	SPMI_VOLTAGE_RANGE(2,  750000,  775000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range nldo3_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  375000,       0,       0, 1537500, 12500),
+	SPMI_VOLTAGE_RANGE(2,  750000,       0,       0, 1537500, 12500),
+};
+
+static struct spmi_voltage_range ln_ldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(1,  690000,  690000, 1110000, 1110000, 60000),
+	SPMI_VOLTAGE_RANGE(0, 1380000, 1380000, 2220000, 2220000, 120000),
+};
+
+static struct spmi_voltage_range smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
+	SPMI_VOLTAGE_RANGE(1, 1550000, 1575000, 3125000, 3125000, 25000),
+};
+
+static struct spmi_voltage_range ftsmps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,       0,  350000, 1275000, 1275000,  5000),
+	SPMI_VOLTAGE_RANGE(1,       0, 1280000, 2040000, 2040000, 10000),
+};
+
+static struct spmi_voltage_range ftsmps2p5_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,   80000,  350000, 1355000, 1355000,  5000),
+	SPMI_VOLTAGE_RANGE(1,  160000, 1360000, 2200000, 2200000, 10000),
+};
+
+static struct spmi_voltage_range boost_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 4000000, 4000000, 5550000, 5550000, 50000),
+};
+
+static struct spmi_voltage_range boost_byp_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 2500000, 2500000, 5200000, 5650000, 50000),
+};
+
+static struct spmi_voltage_range ult_lo_smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1562500, 1562500, 12500),
+	SPMI_VOLTAGE_RANGE(1,  750000,       0,       0, 1525000, 25000),
+};
+
+static struct spmi_voltage_range ult_ho_smps_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1550000, 1550000, 2325000, 2325000, 25000),
+};
+
+static struct spmi_voltage_range ult_nldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0,  375000,  375000, 1537500, 1537500, 12500),
+};
+
+static struct spmi_voltage_range ult_pldo_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1750000, 1750000, 3337500, 3337500, 12500),
+};
+
+static DEFINE_SPMI_SET_POINTS(pldo);
+static DEFINE_SPMI_SET_POINTS(nldo1);
+static DEFINE_SPMI_SET_POINTS(nldo2);
+static DEFINE_SPMI_SET_POINTS(nldo3);
+static DEFINE_SPMI_SET_POINTS(ln_ldo);
+static DEFINE_SPMI_SET_POINTS(smps);
+static DEFINE_SPMI_SET_POINTS(ftsmps);
+static DEFINE_SPMI_SET_POINTS(ftsmps2p5);
+static DEFINE_SPMI_SET_POINTS(boost);
+static DEFINE_SPMI_SET_POINTS(boost_byp);
+static DEFINE_SPMI_SET_POINTS(ult_lo_smps);
+static DEFINE_SPMI_SET_POINTS(ult_ho_smps);
+static DEFINE_SPMI_SET_POINTS(ult_nldo);
+static DEFINE_SPMI_SET_POINTS(ult_pldo);
+
+static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
+				 int len)
+{
+	return regmap_bulk_read(vreg->regmap, vreg->base + addr, buf, len);
+}
+
+static inline int spmi_vreg_write(struct spmi_regulator *vreg, u16 addr,
+				u8 *buf, int len)
+{
+	return regmap_bulk_write(vreg->regmap, vreg->base + addr, buf, len);
+}
+
+static int spmi_vreg_update_bits(struct spmi_regulator *vreg, u16 addr, u8 val,
+		u8 mask)
+{
+	return regmap_update_bits(vreg->regmap, vreg->base + addr, mask, val);
+}
+
+static int spmi_regulator_common_is_enabled(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_ENABLE, &reg, 1);
+
+	return (reg & SPMI_COMMON_ENABLE_MASK) == SPMI_COMMON_ENABLE;
+}
+
+static int spmi_regulator_common_enable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
+}
+
+static int spmi_regulator_vs_enable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	if (vreg->ocp_irq) {
+		vreg->ocp_count = 0;
+		vreg->vs_enable_time = ktime_get();
+	}
+
+	return spmi_regulator_common_enable(rdev);
+}
+
+static int spmi_regulator_common_disable(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
+}
+
+static int spmi_regulator_select_voltage(struct spmi_regulator *vreg,
+		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
+		unsigned *selector)
+{
+	const struct spmi_voltage_range *range;
+	int uV = min_uV;
+	int lim_min_uV, lim_max_uV, i, range_id, range_max_uV;
+
+	/* Check if request voltage is outside of physically settable range. */
+	lim_min_uV = vreg->set_points->range[0].set_point_min_uV;
+	lim_max_uV =
+	  vreg->set_points->range[vreg->set_points->count - 1].set_point_max_uV;
+
+	if (uV < lim_min_uV && max_uV >= lim_min_uV)
+		uV = lim_min_uV;
+
+	if (uV < lim_min_uV || uV > lim_max_uV) {
+		dev_err(vreg->dev,
+			"request v=[%d, %d] is outside possible v=[%d, %d]\n",
+			 min_uV, max_uV, lim_min_uV, lim_max_uV);
+		return -EINVAL;
+	}
+
+	/* Find the range which uV is inside of. */
+	for (i = vreg->set_points->count - 1; i > 0; i--) {
+		range_max_uV = vreg->set_points->range[i - 1].set_point_max_uV;
+		if (uV > range_max_uV && range_max_uV > 0)
+			break;
+	}
+
+	range_id = i;
+	range = &vreg->set_points->range[range_id];
+	*range_sel = range->range_sel;
+
+	/*
+	 * Force uV to be an allowed set point by applying a ceiling function to
+	 * the uV value.
+	 */
+	*voltage_sel = (uV - range->min_uV + range->step_uV - 1)
+			/ range->step_uV;
+	uV = *voltage_sel * range->step_uV + range->min_uV;
+
+	if (uV > max_uV) {
+		dev_err(vreg->dev,
+			"request v=[%d, %d] cannot be met by any set point; "
+			"next set point: %d\n",
+			min_uV, max_uV, uV);
+		return -EINVAL;
+	}
+
+	*selector = 0;
+	for (i = 0; i < range_id; i++)
+		*selector += vreg->set_points->range[i].n_voltages;
+	*selector += (uV - range->set_point_min_uV) / range->step_uV;
+
+	return 0;
+}
+
+static const struct spmi_voltage_range *
+spmi_regulator_find_range(struct spmi_regulator *vreg)
+{
+	u8 range_sel;
+	const struct spmi_voltage_range *range, *end;
+
+	range = vreg->set_points->range;
+	end = range + vreg->set_points->count;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, &range_sel, 1);
+
+	for (; range < end; range++)
+		if (range->range_sel == range_sel)
+			return range;
+
+	return NULL;
+}
+
+static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
+		int min_uV, int max_uV, u8 *range_sel, u8 *voltage_sel,
+		unsigned *selector)
+{
+	const struct spmi_voltage_range *range;
+	int uV = min_uV;
+	int i;
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		goto different_range;
+
+	if (uV < range->min_uV && max_uV >= range->min_uV)
+		uV = range->min_uV;
+
+	if (uV < range->min_uV || uV > range->max_uV) {
+		/* Current range doesn't support the requested voltage. */
+		goto different_range;
+	}
+
+	/*
+	 * Force uV to be an allowed set point by applying a ceiling function to
+	 * the uV value.
+	 */
+	*voltage_sel = DIV_ROUND_UP(uV - range->min_uV, range->step_uV);
+	uV = *voltage_sel * range->step_uV + range->min_uV;
+
+	if (uV > max_uV) {
+		/*
+		 * No set point in the current voltage range is within the
+		 * requested min_uV to max_uV range.
+		 */
+		goto different_range;
+	}
+
+	*selector = 0;
+	for (i = 0; i < vreg->set_points->count; i++) {
+		if (uV >= vreg->set_points->range[i].set_point_min_uV
+		    && uV <= vreg->set_points->range[i].set_point_max_uV) {
+			*selector +=
+			    (uV - vreg->set_points->range[i].set_point_min_uV)
+				/ vreg->set_points->range[i].step_uV;
+			break;
+		}
+
+		*selector += vreg->set_points->range[i].n_voltages;
+	}
+
+	if (*selector >= vreg->set_points->n_voltages)
+		goto different_range;
+
+	return 0;
+
+different_range:
+	return spmi_regulator_select_voltage(vreg, min_uV, max_uV,
+			range_sel, voltage_sel, selector);
+}
+
+static int spmi_regulator_common_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 buf[2];
+	u8 range_sel, voltage_sel;
+
+	/*
+	 * Favor staying in the current voltage range if possible.  This avoids
+	 * voltage spikes that occur when changing the voltage range.
+	 */
+	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
+		&range_sel, &voltage_sel, selector);
+	if (ret)
+		return ret;
+
+	buf[0] = range_sel;
+	buf[1] = voltage_sel;
+	return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_RANGE, buf, 2);
+}
+
+static int spmi_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+		unsigned int old_selector, unsigned int new_selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	int diff_uV;
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return -EINVAL;
+
+	diff_uV = abs(new_selector - old_selector) * range->step_uV;
+
+	return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
+}
+
+static int spmi_regulator_common_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return VOLTAGE_UNKNOWN;
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_single_range_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 range_sel, sel;
+
+	ret = spmi_regulator_select_voltage(vreg, min_uV, max_uV, &range_sel,
+		&sel, selector);
+	if (ret) {
+		dev_err(vreg->dev, "could not set voltage, ret=%d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Certain types of regulators do not have a range select register so
+	 * only voltage set register needs to be written.
+	 */
+	return spmi_vreg_write(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &sel, 1);
+}
+
+static int spmi_regulator_single_range_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range = vreg->set_points->range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_ult_lo_smps_set_voltage(struct regulator_dev *rdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+	u8 range_sel, voltage_sel;
+
+	/*
+	 * Favor staying in the current voltage range if possible. This avoids
+	 * voltage spikes that occur when changing the voltage range.
+	 */
+	ret = spmi_regulator_select_voltage_same_range(vreg, min_uV, max_uV,
+		&range_sel, &voltage_sel, selector);
+	if (ret)
+		return ret;
+
+	/*
+	 * Calculate VSET based on range
+	 * In case of range 0: voltage_sel is a 7 bit value, can be written
+	 *			witout any modification.
+	 * In case of range 1: voltage_sel is a 5 bit value, bits[7-5] set to
+	 *			[011].
+	 */
+	if (range_sel == 1)
+		voltage_sel |= ULT_SMPS_RANGE_SPLIT;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_VOLTAGE_SET,
+	       voltage_sel, 0xff);
+}
+
+static int spmi_regulator_ult_lo_smps_get_voltage(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	const struct spmi_voltage_range *range;
+	u8 voltage_sel;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_VOLTAGE_SET, &voltage_sel, 1);
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return VOLTAGE_UNKNOWN;
+
+	if (range->range_sel == 1)
+		voltage_sel &= ~ULT_SMPS_RANGE_SPLIT;
+
+	return range->step_uV * voltage_sel + range->min_uV;
+}
+
+static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
+			unsigned selector)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	int uV = 0;
+	int i;
+
+	if (selector >= vreg->set_points->n_voltages)
+		return 0;
+
+	for (i = 0; i < vreg->set_points->count; i++) {
+		if (selector < vreg->set_points->range[i].n_voltages) {
+			uV = selector * vreg->set_points->range[i].step_uV
+				+ vreg->set_points->range[i].set_point_min_uV;
+			break;
+		}
+
+		selector -= vreg->set_points->range[i].n_voltages;
+	}
+
+	return uV;
+}
+
+static int
+spmi_regulator_common_set_bypass(struct regulator_dev *rdev, bool enable)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_COMMON_MODE_BYPASS_MASK;
+	u8 val = 0;
+
+	if (enable)
+		val = mask;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
+static int
+spmi_regulator_common_get_bypass(struct regulator_dev *rdev, bool *enable)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 val;
+	int ret;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &val, 1);
+	*enable = val & SPMI_COMMON_MODE_BYPASS_MASK;
+
+	return ret;
+}
+
+static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
+
+	if (reg & SPMI_COMMON_MODE_HPM_MASK)
+		return REGULATOR_MODE_NORMAL;
+
+	return REGULATOR_MODE_IDLE;
+}
+
+static int
+spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_COMMON_MODE_HPM_MASK;
+	u8 val = 0;
+
+	if (mode == REGULATOR_MODE_NORMAL)
+		val = mask;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
+static int
+spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mode;
+
+	if (load_uA >= vreg->hpm_min_load)
+		mode = REGULATOR_MODE_NORMAL;
+	else
+		mode = REGULATOR_MODE_IDLE;
+
+	return spmi_regulator_common_set_mode(rdev, mode);
+}
+
+static int spmi_regulator_common_set_pull_down(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_COMMON_PULL_DOWN_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_PULL_DOWN,
+				     mask, mask);
+}
+
+static int spmi_regulator_common_set_soft_start(struct regulator_dev *rdev)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	unsigned int mask = SPMI_LDO_SOFT_START_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_SOFT_START,
+				     mask, mask);
+}
+
+static int spmi_regulator_set_ilim(struct regulator_dev *rdev, int ilim_uA)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	enum spmi_regulator_logical_type type = vreg->logical_type;
+	unsigned int current_reg;
+	u8 reg;
+	u8 mask = SPMI_BOOST_CURRENT_LIMIT_MASK |
+		  SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
+	int max = (SPMI_BOOST_CURRENT_LIMIT_MASK + 1) * 500;
+
+	if (type == SPMI_REGULATOR_LOGICAL_TYPE_BOOST)
+		current_reg = SPMI_BOOST_REG_CURRENT_LIMIT;
+	else
+		current_reg = SPMI_BOOST_BYP_REG_CURRENT_LIMIT;
+
+	if (ilim_uA > max || ilim_uA <= 0)
+		return -EINVAL;
+
+	reg = (ilim_uA - 1) / 500;
+	reg |= SPMI_BOOST_CURRENT_LIMIT_ENABLE_MASK;
+
+	return spmi_vreg_update_bits(vreg, current_reg, reg, mask);
+}
+
+static int spmi_regulator_vs_clear_ocp(struct spmi_regulator *vreg)
+{
+	int ret;
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_DISABLE, SPMI_COMMON_ENABLE_MASK);
+
+	vreg->vs_enable_time = ktime_get();
+
+	ret = spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_ENABLE,
+		SPMI_COMMON_ENABLE, SPMI_COMMON_ENABLE_MASK);
+
+	return ret;
+}
+
+static void spmi_regulator_vs_ocp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct spmi_regulator *vreg
+		= container_of(dwork, struct spmi_regulator, ocp_work);
+
+	spmi_regulator_vs_clear_ocp(vreg);
+}
+
+static irqreturn_t spmi_regulator_vs_ocp_isr(int irq, void *data)
+{
+	struct spmi_regulator *vreg = data;
+	ktime_t ocp_irq_time;
+	s64 ocp_trigger_delay_us;
+
+	ocp_irq_time = ktime_get();
+	ocp_trigger_delay_us = ktime_us_delta(ocp_irq_time,
+						vreg->vs_enable_time);
+
+	/*
+	 * Reset the OCP count if there is a large delay between switch enable
+	 * and when OCP triggers.  This is indicative of a hotplug event as
+	 * opposed to a fault.
+	 */
+	if (ocp_trigger_delay_us > SPMI_VS_OCP_FAULT_DELAY_US)
+		vreg->ocp_count = 0;
+
+	/* Wait for switch output to settle back to 0 V after OCP triggered. */
+	udelay(SPMI_VS_OCP_FALL_DELAY_US);
+
+	vreg->ocp_count++;
+
+	if (vreg->ocp_count == 1) {
+		/* Immediately clear the over current condition. */
+		spmi_regulator_vs_clear_ocp(vreg);
+	} else if (vreg->ocp_count <= vreg->ocp_max_retries) {
+		/* Schedule the over current clear task to run later. */
+		schedule_delayed_work(&vreg->ocp_work,
+			msecs_to_jiffies(vreg->ocp_retry_delay_ms) + 1);
+	} else {
+		dev_err(vreg->dev,
+			"OCP triggered %d times; no further retries\n",
+			vreg->ocp_count);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct regulator_ops spmi_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+static struct regulator_ops spmi_ln_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+};
+
+static struct regulator_ops spmi_vs_ops = {
+	.enable			= spmi_regulator_vs_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+static struct regulator_ops spmi_boost_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_input_current_limit = spmi_regulator_set_ilim,
+};
+
+static struct regulator_ops spmi_ftsmps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_common_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage		= spmi_regulator_common_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_lo_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_ult_lo_smps_set_voltage,
+	.get_voltage		= spmi_regulator_ult_lo_smps_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_ho_smps_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
+static struct regulator_ops spmi_ult_ldo_ops = {
+	.enable			= spmi_regulator_common_enable,
+	.disable		= spmi_regulator_common_disable,
+	.is_enabled		= spmi_regulator_common_is_enabled,
+	.set_voltage		= spmi_regulator_single_range_set_voltage,
+	.get_voltage		= spmi_regulator_single_range_get_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_bypass		= spmi_regulator_common_set_bypass,
+	.get_bypass		= spmi_regulator_common_get_bypass,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+	.set_soft_start		= spmi_regulator_common_set_soft_start,
+};
+
+/* Maximum possible digital major revision value */
+#define INF 0xFF
+
+static const struct spmi_regulator_mapping supported_regulators[] = {
+	/*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
+	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
+	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
+	SPMI_VREG(LDO,   N600,     0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N1200,    0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N600,     1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N1200,    1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N600_ST,  0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N1200_ST, 0,   0, LDO,    ldo,    nldo2,   10000),
+	SPMI_VREG(LDO,   N600_ST,  1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   N1200_ST, 1, INF, LDO,    ldo,    nldo3,   10000),
+	SPMI_VREG(LDO,   P50,      0, INF, LDO,    ldo,    pldo,     5000),
+	SPMI_VREG(LDO,   P150,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P300,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P600,     0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   P1200,    0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LN,       0, INF, LN_LDO, ln_ldo, ln_ldo,      0),
+	SPMI_VREG(LDO,   LV_P50,   0, INF, LDO,    ldo,    pldo,     5000),
+	SPMI_VREG(LDO,   LV_P150,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P300,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P600,  0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG(LDO,   LV_P1200, 0, INF, LDO,    ldo,    pldo,    10000),
+	SPMI_VREG_VS(LV100,        0, INF),
+	SPMI_VREG_VS(LV300,        0, INF),
+	SPMI_VREG_VS(MV300,        0, INF),
+	SPMI_VREG_VS(MV500,        0, INF),
+	SPMI_VREG_VS(HDMI,         0, INF),
+	SPMI_VREG_VS(OTG,          0, INF),
+	SPMI_VREG(BOOST, 5V_BOOST, 0, INF, BOOST,  boost,  boost,       0),
+	SPMI_VREG(FTS,   FTS_CTL,  0, INF, FTSMPS, ftsmps, ftsmps, 100000),
+	SPMI_VREG(FTS, FTS2p5_CTL, 0, INF, FTSMPS, ftsmps, ftsmps2p5, 100000),
+	SPMI_VREG(BOOST_BYP, BB_2A, 0, INF, BOOST_BYP, boost, boost_byp, 0),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL1, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL2, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL3, 0, INF, ULT_LO_SMPS, ult_lo_smps,
+						ult_lo_smps,   100000),
+	SPMI_VREG(ULT_BUCK, ULT_HF_CTL4, 0, INF, ULT_HO_SMPS, ult_ho_smps,
+						ult_ho_smps,   100000),
+	SPMI_VREG(ULT_LDO, N300_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N600_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N900_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, N1200_ST, 0, INF, ULT_LDO, ult_ldo, ult_nldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P150,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P300,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, LV_P450,  0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P600,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
+	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+};
+
+static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
+{
+	unsigned int n;
+	struct spmi_voltage_range *range = points->range;
+
+	for (; range < points->range + points->count; range++) {
+		n = 0;
+		if (range->set_point_max_uV) {
+			n = range->set_point_max_uV - range->set_point_min_uV;
+			n = (n / range->step_uV) + 1;
+		}
+		range->n_voltages = n;
+		points->n_voltages += n;
+	}
+}
+
+static int spmi_regulator_match(struct spmi_regulator *vreg, u16 force_type)
+{
+	const struct spmi_regulator_mapping *mapping;
+	int ret, i;
+	u32 dig_major_rev;
+	u8 version[SPMI_COMMON_REG_SUBTYPE - SPMI_COMMON_REG_DIG_MAJOR_REV + 1];
+	u8 type, subtype;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_DIG_MAJOR_REV, version,
+		ARRAY_SIZE(version));
+	if (ret) {
+		dev_err(vreg->dev, "could not read version registers\n");
+		return ret;
+	}
+	dig_major_rev	= version[SPMI_COMMON_REG_DIG_MAJOR_REV
+					- SPMI_COMMON_REG_DIG_MAJOR_REV];
+	if (!force_type) {
+		type		= version[SPMI_COMMON_REG_TYPE -
+					  SPMI_COMMON_REG_DIG_MAJOR_REV];
+		subtype		= version[SPMI_COMMON_REG_SUBTYPE -
+					  SPMI_COMMON_REG_DIG_MAJOR_REV];
+	} else {
+		type = force_type >> 8;
+		subtype = force_type;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
+		mapping = &supported_regulators[i];
+		if (mapping->type == type && mapping->subtype == subtype
+		    && mapping->revision_min <= dig_major_rev
+		    && mapping->revision_max >= dig_major_rev)
+			goto found;
+	}
+
+	dev_err(vreg->dev,
+		"unsupported regulator: name=%s type=0x%02X, subtype=0x%02X, dig major rev=0x%02X\n",
+		vreg->desc.name, type, subtype, dig_major_rev);
+
+	return -ENODEV;
+
+found:
+	vreg->logical_type	= mapping->logical_type;
+	vreg->set_points	= mapping->set_points;
+	vreg->hpm_min_load	= mapping->hpm_min_load;
+	vreg->desc.ops		= mapping->ops;
+
+	if (mapping->set_points) {
+		if (!mapping->set_points->n_voltages)
+			spmi_calculate_num_voltages(mapping->set_points);
+		vreg->desc.n_voltages = mapping->set_points->n_voltages;
+	}
+
+	return 0;
+}
+
+static int spmi_regulator_ftsmps_init_slew_rate(struct spmi_regulator *vreg)
+{
+	int ret;
+	u8 reg = 0;
+	int step, delay, slew_rate;
+	const struct spmi_voltage_range *range;
+
+	ret = spmi_vreg_read(vreg, SPMI_COMMON_REG_STEP_CTRL, &reg, 1);
+	if (ret) {
+		dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	range = spmi_regulator_find_range(vreg);
+	if (!range)
+		return -EINVAL;
+
+	step = reg & SPMI_FTSMPS_STEP_CTRL_STEP_MASK;
+	step >>= SPMI_FTSMPS_STEP_CTRL_STEP_SHIFT;
+
+	delay = reg & SPMI_FTSMPS_STEP_CTRL_DELAY_MASK;
+	delay >>= SPMI_FTSMPS_STEP_CTRL_DELAY_SHIFT;
+
+	/* slew_rate has units of uV/us */
+	slew_rate = SPMI_FTSMPS_CLOCK_RATE * range->step_uV * (1 << step);
+	slew_rate /= 1000 * (SPMI_FTSMPS_STEP_DELAY << delay);
+	slew_rate *= SPMI_FTSMPS_STEP_MARGIN_NUM;
+	slew_rate /= SPMI_FTSMPS_STEP_MARGIN_DEN;
+
+	/* Ensure that the slew rate is greater than 0 */
+	vreg->slew_rate = max(slew_rate, 1);
+
+	return ret;
+}
+
+static unsigned int spmi_regulator_of_map_mode(unsigned int mode)
+{
+	if (mode)
+		return REGULATOR_MODE_NORMAL;
+
+	return REGULATOR_MODE_IDLE;
+}
+
+static int spmi_regulator_of_parse(struct device_node *node,
+			    const struct regulator_desc *desc,
+			    struct regulator_config *config)
+{
+	struct spmi_regulator *vreg = config->driver_data;
+	struct device *dev = config->dev;
+	int ret;
+
+	vreg->ocp_max_retries = SPMI_VS_OCP_DEFAULT_MAX_RETRIES;
+	vreg->ocp_retry_delay_ms = SPMI_VS_OCP_DEFAULT_RETRY_DELAY_MS;
+
+	if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS) {
+		ret = spmi_regulator_ftsmps_init_slew_rate(vreg);
+		if (ret)
+			return ret;
+	}
+
+	if (vreg->logical_type != SPMI_REGULATOR_LOGICAL_TYPE_VS)
+		vreg->ocp_irq = 0;
+
+	if (vreg->ocp_irq) {
+		ret = devm_request_irq(dev, vreg->ocp_irq,
+			spmi_regulator_vs_ocp_isr, IRQF_TRIGGER_RISING, "ocp",
+			vreg);
+		if (ret < 0) {
+			dev_err(dev, "failed to request irq %d, ret=%d\n",
+				vreg->ocp_irq, ret);
+			return ret;
+		}
+
+		INIT_DELAYED_WORK(&vreg->ocp_work, spmi_regulator_vs_ocp_work);
+	}
+
+	return 0;
+}
+
+static const struct spmi_regulator_data pm8941_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l11", },
+	{ "l5", 0x4400, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l6", 0x4500, "vdd_l6_l12_l14_l15", },
+	{ "l7", 0x4600, "vdd_l5_l7", NULL, 0x0410 },
+	{ "l8", 0x4700, "vdd_l8_l16_l18_19", },
+	{ "l9", 0x4800, "vdd_l9_l10_l17_l22", },
+	{ "l10", 0x4900, "vdd_l9_l10_l17_l22", },
+	{ "l11", 0x4a00, "vdd_l4_l11", },
+	{ "l12", 0x4b00, "vdd_l6_l12_l14_l15", },
+	{ "l13", 0x4c00, "vdd_l13_l20_l23_l24", },
+	{ "l14", 0x4d00, "vdd_l6_l12_l14_l15", },
+	{ "l15", 0x4e00, "vdd_l6_l12_l14_l15", },
+	{ "l16", 0x4f00, "vdd_l8_l16_l18_19", },
+	{ "l17", 0x5000, "vdd_l9_l10_l17_l22", },
+	{ "l18", 0x5100, "vdd_l8_l16_l18_19", },
+	{ "l19", 0x5200, "vdd_l8_l16_l18_19", },
+	{ "l20", 0x5300, "vdd_l13_l20_l23_l24", },
+	{ "l21", 0x5400, "vdd_l21", },
+	{ "l22", 0x5500, "vdd_l9_l10_l17_l22", },
+	{ "l23", 0x5600, "vdd_l13_l20_l23_l24", },
+	{ "l24", 0x5700, "vdd_l13_l20_l23_l24", },
+	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
+	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
+	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
+	{ "mvs1", 0x8300, "vin_5vs", },
+	{ "mvs2", 0x8400, "vin_5vs", },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8841_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", NULL, 0x1c08 },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", NULL, 0x1c08 },
+	{ "s5", 0x2000, "vdd_s5", NULL, 0x1c08 },
+	{ "s6", 0x2300, "vdd_s6", NULL, 0x1c08 },
+	{ "s7", 0x2600, "vdd_s7", NULL, 0x1c08 },
+	{ "s8", 0x2900, "vdd_s8", NULL, 0x1c08 },
+	{ }
+};
+
+static const struct spmi_regulator_data pm8916_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "l1", 0x4000, "vdd_l1_l3", },
+	{ "l2", 0x4100, "vdd_l2", },
+	{ "l3", 0x4200, "vdd_l1_l3", },
+	{ "l4", 0x4300, "vdd_l4_l5_l6", },
+	{ "l5", 0x4400, "vdd_l4_l5_l6", },
+	{ "l6", 0x4500, "vdd_l4_l5_l6", },
+	{ "l7", 0x4600, "vdd_l7", },
+	{ "l8", 0x4700, "vdd_l8_l11_l14_l15_l16", },
+	{ "l9", 0x4800, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l10", 0x4900, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l11", 0x4a00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l12", 0x4b00, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l13", 0x4c00, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l14", 0x4d00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l15", 0x4e00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l16", 0x4f00, "vdd_l8_l11_l14_l15_l16", },
+	{ "l17", 0x5000, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ "l18", 0x5100, "vdd_l9_l10_l12_l13_l17_l18", },
+	{ }
+};
+
+static const struct of_device_id qcom_spmi_regulator_match[] = {
+	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
+	{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
+	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
+
+static int qcom_spmi_regulator_probe(struct platform_device *pdev)
+{
+	const struct spmi_regulator_data *reg;
+	const struct of_device_id *match;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct spmi_regulator *vreg;
+	struct regmap *regmap;
+	const char *name;
+	struct device *dev = &pdev->dev;
+	int ret;
+	struct list_head *vreg_list;
+
+	vreg_list = devm_kzalloc(dev, sizeof(*vreg_list), GFP_KERNEL);
+	if (!vreg_list)
+		return -ENOMEM;
+	INIT_LIST_HEAD(vreg_list);
+	platform_set_drvdata(pdev, vreg_list);
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	match = of_match_device(qcom_spmi_regulator_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	for (reg = match->data; reg->name; reg++) {
+		vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+		if (!vreg)
+			return -ENOMEM;
+
+		vreg->dev = dev;
+		vreg->base = reg->base;
+		vreg->regmap = regmap;
+
+		if (reg->ocp) {
+			vreg->ocp_irq = platform_get_irq_byname(pdev, reg->ocp);
+			if (vreg->ocp_irq < 0) {
+				ret = vreg->ocp_irq;
+				goto err;
+			}
+		}
+
+		vreg->desc.id = -1;
+		vreg->desc.owner = THIS_MODULE;
+		vreg->desc.type = REGULATOR_VOLTAGE;
+		vreg->desc.name = name = reg->name;
+		vreg->desc.supply_name = reg->supply;
+		vreg->desc.of_match = reg->name;
+		vreg->desc.of_parse_cb = spmi_regulator_of_parse;
+		vreg->desc.of_map_mode = spmi_regulator_of_map_mode;
+
+		ret = spmi_regulator_match(vreg, reg->force_type);
+		if (ret)
+			goto err;
+
+		config.dev = dev;
+		config.driver_data = vreg;
+		rdev = devm_regulator_register(dev, &vreg->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "failed to register %s\n", name);
+			ret = PTR_ERR(rdev);
+			goto err;
+		}
+
+		INIT_LIST_HEAD(&vreg->node);
+		list_add(&vreg->node, vreg_list);
+	}
+
+	return 0;
+
+err:
+	list_for_each_entry(vreg, vreg_list, node)
+		if (vreg->ocp_irq)
+			cancel_delayed_work_sync(&vreg->ocp_work);
+	return ret;
+}
+
+static int qcom_spmi_regulator_remove(struct platform_device *pdev)
+{
+	struct spmi_regulator *vreg;
+	struct list_head *vreg_list = platform_get_drvdata(pdev);
+
+	list_for_each_entry(vreg, vreg_list, node)
+		if (vreg->ocp_irq)
+			cancel_delayed_work_sync(&vreg->ocp_work);
+
+	return 0;
+}
+
+static struct platform_driver qcom_spmi_regulator_driver = {
+	.driver		= {
+		.name	= "qcom-spmi-regulator",
+		.of_match_table = qcom_spmi_regulator_match,
+	},
+	.probe		= qcom_spmi_regulator_probe,
+	.remove		= qcom_spmi_regulator_remove,
+};
+module_platform_driver(qcom_spmi_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-spmi-regulator");
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index ff828117798f..326ffb553371 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -515,7 +515,7 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 			rdev->desc->enable_mask, val);
@@ -538,7 +538,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 		default:
 			state = S2MPS14_ENABLE_SUSPEND;
 			break;
-		};
+		}
 		break;
 	case S2MPU02:
 		switch (rdev_id) {
@@ -552,11 +552,11 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
 		default:
 			state = S2MPU02_ENABLE_SUSPEND;
 			break;
-		};
+		}
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 	if (ret < 0)
@@ -977,7 +977,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Invalid device type: %u\n",
 				    s2mps11->dev_type);
 		return -EINVAL;
-	};
+	}
 
 	s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev,
 			sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 0d7e164a5e76..8cbb82ceec40 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -533,7 +533,8 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_uv_irq,
-					IRQF_TRIGGER_RISING, dcdc->name, dcdc);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -543,7 +544,8 @@ static int wm831x_buckv_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "HC"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_oc_irq,
-					IRQF_TRIGGER_RISING, dcdc->name, dcdc);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
 			irq, ret);
@@ -669,7 +671,8 @@ static int wm831x_buckp_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_uv_irq,
-					IRQF_TRIGGER_RISING, dcdc->name, dcdc);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name, dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
@@ -785,7 +788,8 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_dcdc_uv_irq,
-					IRQF_TRIGGER_RISING, dcdc->name,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dcdc->name,
 					dcdc);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
index 1e88391a1628..1442828fcd9a 100644
--- a/drivers/regulator/wm831x-isink.c
+++ b/drivers/regulator/wm831x-isink.c
@@ -204,7 +204,8 @@ static int wm831x_isink_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq(pdev, 0));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_isink_irq,
-					IRQF_TRIGGER_RISING, isink->name,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					isink->name,
 					isink);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 7ae2dc82f636..5a7b65e8a529 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -287,7 +287,8 @@ static int wm831x_gp_ldo_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_ldo_uv_irq,
-					IRQF_TRIGGER_RISING, ldo->name,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					ldo->name,
 					ldo);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
@@ -496,7 +497,8 @@ static int wm831x_aldo_probe(struct platform_device *pdev)
 	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 					wm831x_ldo_uv_irq,
-					IRQF_TRIGGER_RISING, ldo->name, ldo);
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					ldo->name, ldo);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
 			irq, ret);
author	Linus Torvalds	2015-06-23 17:30:20 -0700
committer	Linus Torvalds	2015-06-23 17:30:20 -0700
commit	7fe0bf908d4f8f7d134cab280cac64fe65997ac1 (patch)
tree	e14095fcaadd69df93b7a0a792001675582a1a1b /drivers
parent	5a602e157a9d91d5ce98d07c404097edba8ec9f3 (diff)
parent	733ada000f2c9618ccbac7b9ba146113f0a6675b (diff)