diff options
author | Linus Torvalds | 2013-03-02 07:44:16 -0800 |
---|---|---|
committer | Linus Torvalds | 2013-03-02 07:44:16 -0800 |
commit | aebb2afd5420c860b7fbc3882a323ef1247fbf16 (patch) | |
tree | 05ee0efcebca5ec421de44de7a6d6271088c64a8 /drivers | |
parent | 8eae508b7c6ff502a71d0293b69e97c5505d5840 (diff) | |
parent | edb15d83a875a1f4b1576188844db5c330c3267d (diff) |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
o Add basic support for the Mediatek/Ralink Wireless SoC family.
o The Qualcomm Atheros platform is extended by support for the new
QCA955X SoC series as well as a bunch of patches that get the code
ready for OF support.
o Lantiq and BCM47XX platform have a few improvements and bug fixes.
o MIPS has sent a few patches that get the kernel ready for the
upcoming microMIPS support.
o The rest of the series is made up of small bug fixes and cleanups
that relate to various parts of the MIPS code. The biggy in there is
a whitespace cleanup. After I was sent another set of whitespace
cleanup patches I decided it was the time to clean the whitespace
"issues" for once and and that touches many files below arch/mips/.
Fix up silly conflicts, mostly due to whitespace cleanups.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
MIPS: remove broken conditional inside vpe loader code
MIPS: SMTC: fix implicit declaration of set_vi_handler
MIPS: early_printk: drop __init annotations
MIPS: Probe for and report hardware virtualization support.
MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
MIPS: ath79: add USB controller registration code for the QCA955X SoCs
MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
MIPS: ath79: add WMAC registration code for the QCA955X SoCs
MIPS: ath79: register UART for the QCA955X SoCs
MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
MIPS: ath79: add GPIO setup code for the QCA955X SoCs
MIPS: ath79: add IRQ handling code for the QCA955X SoCs
MIPS: ath79: add clock setup code for the QCA955X SoCs
MIPS: ath79: add SoC detection code for the QCA955X SoCs
MIPS: ath79: add early printk support for the QCA955X SoCs
MIPS: ath79: fix WMAC IRQ resource assignment
mips: reserve elfcorehdr
mips: Make sure kernel memory is in iomem
MIPS: ath79: use dynamically allocated USB platform devices
...
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/bcm47xxpart.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/b44.c | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bgmac.c | 6 | ||||
-rw-r--r-- | drivers/ssb/driver_chipcommon_pmu.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 10 |
5 files changed, 13 insertions, 13 deletions
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index e06d782489a6..6a1180502cc1 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -14,7 +14,7 @@ #include <linux/slab.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <asm/mach-bcm47xx/nvram.h> +#include <bcm47xx_nvram.h> /* 10 parts were found on sflash on Netgear WNDR4500 */ #define BCM47XXPART_MAX_PARTS 12 diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index a7efec293037..9b017d9c58e9 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -381,7 +381,7 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote) } #ifdef CONFIG_BCM47XX -#include <asm/mach-bcm47xx/nvram.h> +#include <bcm47xx_nvram.h> static void b44_wap54g10_workaround(struct b44 *bp) { char buf[20]; @@ -393,7 +393,7 @@ static void b44_wap54g10_workaround(struct b44 *bp) * see https://dev.openwrt.org/ticket/146 * check and reset bit "isolate" */ - if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0) + if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) < 0) return; if (simple_strtoul(buf, NULL, 0) == 2) { err = __b44_readphy(bp, 0, MII_BMCR, &val); diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index bf985c04524e..639049d7e92d 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -15,7 +15,7 @@ #include <linux/mii.h> #include <linux/interrupt.h> #include <linux/dma-mapping.h> -#include <asm/mach-bcm47xx/nvram.h> +#include <bcm47xx_nvram.h> static const struct bcma_device_id bgmac_bcma_tbl[] = { BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), @@ -908,7 +908,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac) BGMAC_CHIPCTL_1_IF_TYPE_RMII; char buf[2]; - if (nvram_getenv("et_swtype", buf, 1) > 0) { + if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) { if (kstrtou8(buf, 0, &et_swtype)) bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", buf); @@ -1386,7 +1386,7 @@ static int bgmac_probe(struct bcma_device *core) } bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; - if (nvram_getenv("et0_no_txint", NULL, 0) == 0) + if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0) bgmac->int_mask &= ~BGMAC_IS_TX_MASK; /* TODO: reset the external phy. Specs are needed */ diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c index a43415a7fbed..4c0f6d883dd3 100644 --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -14,7 +14,7 @@ #include <linux/delay.h> #include <linux/export.h> #ifdef CONFIG_BCM47XX -#include <asm/mach-bcm47xx/nvram.h> +#include <bcm47xx_nvram.h> #endif #include "ssb_private.h" @@ -322,7 +322,7 @@ static void ssb_pmu_pll_init(struct ssb_chipcommon *cc) if (bus->bustype == SSB_BUSTYPE_SSB) { #ifdef CONFIG_BCM47XX char buf[20]; - if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) + if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) crystalfreq = simple_strtoul(buf, NULL, 0); #endif } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index a0162cbf0557..cf9210db9fa9 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -729,19 +729,19 @@ config SERIAL_SH_SCI_DMA config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" - depends on SOC_PNX8550 || SOC_PNX833X + depends on SOC_PNX833X select SERIAL_CORE help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial ports, say Y. Otherwise, say N. + If you have a MIPS-based Philips SoC such as PNX8330 and you want + to use serial ports, say Y. Otherwise, say N. config SERIAL_PNX8XXX_CONSOLE bool "Enable PNX8XX0 serial console" depends on SERIAL_PNX8XXX select SERIAL_CORE_CONSOLE help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial console, say Y. Otherwise, say N. + If you have a MIPS-based Philips SoC such as PNX8330 and you want + to use serial console, say Y. Otherwise, say N. config SERIAL_HS_LPC32XX tristate "LPC32XX high speed serial port support" |