drm/i915/rkl: Handle HTI

If HTI (also sometimes called HDPORT) is enabled at startup, it may be
using some of the PHYs and DPLLs making them unavailable for general
usage.  Let's read out the HDPORT_STATE register and avoid making use of
resources that HTI is already using.

v2:
 - Fix minor checkpatch warnings

v3:
 - Just readout HDPORT_STATE register once during init and then parse it
   later as needed.
 - Add a 'has_hti' device info flag to track whether we should readout
   HDPORT_STATE or not.  We can skip the platform/flag tests later since
   the hti_state in dev_priv will remain 0 for platforms it does not
   apply to.
 - Move PLL masking into icl_get_combo_phy_dpll() since at the moment
   RKL is the only platform that has HTI.  (Jose)

Bspec: 49189
Bspec: 53707
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716220551.2730644-5-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

7 files changed, 54 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 1ca70f9abc8d..714b2bc96f23 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4923,6 +4923,13 @@ intel_ddi_max_lanes(struct intel_digital_port *dig_port)
 	return max_lanes;
 }
 
+static bool hti_uses_phy(struct drm_i915_private *i915, enum phy phy)
+{
+	return i915->hti_state & HDPORT_ENABLED &&
+		(i915->hti_state & HDPORT_PHY_USED_DP(phy) ||
+		 i915->hti_state & HDPORT_PHY_USED_HDMI(phy));
+}
+
 void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 {
 	struct intel_digital_port *dig_port;
@@ -4930,6 +4937,18 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 	bool init_hdmi, init_dp, init_lspcon = false;
 	enum phy phy = intel_port_to_phy(dev_priv, port);
 
+	/*
+	 * On platforms with HTI (aka HDPORT), if it's enabled at boot it may
+	 * have taken over some of the PHYs and made them unavailable to the
+	 * driver.  In that case we should skip initializing the corresponding
+	 * outputs.
+	 */
+	if (hti_uses_phy(dev_priv, phy)) {
+		drm_dbg_kms(&dev_priv->drm, "PORT %c / PHY %c reserved by HTI\n",
+			    port_name(port), phy_name(phy));
+		return;
+	}
+
 	init_hdmi = intel_bios_port_supports_dvi(dev_priv, port) ||
 		intel_bios_port_supports_hdmi(dev_priv, port);
 	init_dp = intel_bios_port_supports_dp(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 6cb66580ad2c..db2a5a1a9b35 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -47,6 +47,7 @@
 #include "display/intel_ddi.h"
 #include "display/intel_dp.h"
 #include "display/intel_dp_mst.h"
+#include "display/intel_dpll_mgr.h"
 #include "display/intel_dsi.h"
 #include "display/intel_dvo.h"
 #include "display/intel_gmbus.h"
@@ -17903,6 +17904,13 @@ int intel_modeset_init(struct drm_i915_private *i915)
 	if (i915->max_cdclk_freq == 0)
 		intel_update_max_cdclk(i915);
 
+	/*
+	 * If the platform has HTI, we need to find out whether it has reserved
+	 * any display resources before we create our display outputs.
+	 */
+	if (INTEL_INFO(i915)->display.has_hti)
+		i915->hti_state = intel_de_read(i915, HDPORT_STATE);
+
 	/* Just disable it once at startup */
 	intel_vga_disable(i915);
 	intel_setup_outputs(i915);
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 134c2ecf4c80..81ab975fe4f0 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3475,6 +3475,14 @@ static void icl_update_active_dpll(struct intel_atomic_state *state,
 	icl_set_active_port_dpll(crtc_state, port_dpll_id);
 }
 
+static u32 intel_get_hti_plls(struct drm_i915_private *i915)
+{
+	if (!(i915->hti_state & HDPORT_ENABLED))
+		return 0;
+
+	return REG_FIELD_GET(HDPORT_DPLL_USED_MASK, i915->hti_state);
+}
+
 static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
 				   struct intel_crtc *crtc,
 				   struct intel_encoder *encoder)
@@ -3518,6 +3526,9 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
 		dpll_mask = BIT(DPLL_ID_ICL_DPLL1) | BIT(DPLL_ID_ICL_DPLL0);
 	}
 
+	/* Eliminate DPLLs from consideration if reserved by HTI */
+	dpll_mask &= ~intel_get_hti_plls(dev_priv);
+
 	port_dpll->pll = intel_find_shared_dpll(state, crtc,
 						&port_dpll->hw_state,
 						dpll_mask);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index e4f7f6518945..56dfc6d98caa 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1045,6 +1045,14 @@ struct drm_i915_private {
 	struct intel_l3_parity l3_parity;
 
 	/*
+	 * HTI (aka HDPORT) state read during initial hw readout.  Most
+	 * platforms don't have HTI, so this will just stay 0.  Those that do
+	 * will use this later to figure out which PLLs and PHYs are unavailable
+	 * for driver usage.
+	 */
+	u32 hti_state;
+
+	/*
 	 * edram size in MB.
 	 * Cannot be determined by PCIID. You must always read a register.
 	 */
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 2338f92ce490..366ddfc8df6b 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -890,6 +890,7 @@ static const struct intel_device_info rkl_info = {
 	.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) |
 		BIT(TRANSCODER_C),
 	.require_force_probe = 1,
+	.display.has_hti = 1,
 	.display.has_psr_hw_tracking = 0,
 	.platform_engine_mask =
 		BIT(RCS0) | BIT(BCS0) | BIT(VECS0) | BIT(VCS0),
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index bfdb6d23b5d8..89a9f2d8110e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2921,6 +2921,12 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define MBUS_BBOX_CTL_S1		_MMIO(0x45040)
 #define MBUS_BBOX_CTL_S2		_MMIO(0x45044)
 
+#define HDPORT_STATE			_MMIO(0x45050)
+#define   HDPORT_DPLL_USED_MASK		REG_GENMASK(14, 12)
+#define   HDPORT_PHY_USED_DP(phy)	REG_BIT(2 * (phy) + 2)
+#define   HDPORT_PHY_USED_HDMI(phy)	REG_BIT(2 * (phy) + 1)
+#define   HDPORT_ENABLED		REG_BIT(0)
+
 /* Make render/texture TLB fetches lower priorty than associated data
  *   fetches. This is not turned on by default
  */
diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
index fd2385457ab6..6a3d607218aa 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -146,6 +146,7 @@ enum intel_ppgtt_type {
 	func(has_gmch); \
 	func(has_hdcp); \
 	func(has_hotplug); \
+	func(has_hti); \
 	func(has_ipc); \
 	func(has_modular_fia); \
 	func(has_overlay); \