usb: musb: dsps: use musb register read/write wrappers instead

musb core already exports the register read/write wrappers, so clean up
the duplication in dsps glue.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 44 insertions, 68 deletions

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index eeb7d9ecf7df..2537179636db 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -52,30 +52,6 @@
 static const struct of_device_id musb_dsps_of_match[];
 
 /**
- * avoid using musb_readx()/musb_writex() as glue layer should not be
- * dependent on musb core layer symbols.
- */
-static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
-{
-	return __raw_readb(addr + offset);
-}
-
-static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
-{
-	return __raw_readl(addr + offset);
-}
-
-static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
-{
-	__raw_writeb(data, addr + offset);
-}
-
-static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
-{
-	__raw_writel(data, addr + offset);
-}
-
-/**
  * DSPS musb wrapper register offset.
  * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
  * musb ips.
@@ -223,8 +199,8 @@ static void dsps_musb_enable(struct musb *musb)
 	       ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
 	coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
 
-	dsps_writel(reg_base, wrp->epintr_set, epmask);
-	dsps_writel(reg_base, wrp->coreintr_set, coremask);
+	musb_writel(reg_base, wrp->epintr_set, epmask);
+	musb_writel(reg_base, wrp->coreintr_set, coremask);
 	/* start polling for ID change in dual-role idle mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
@@ -244,10 +220,10 @@ static void dsps_musb_disable(struct musb *musb)
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	void __iomem *reg_base = musb->ctrl_base;
 
-	dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
-	dsps_writel(reg_base, wrp->epintr_clear,
+	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
+	musb_writel(reg_base, wrp->epintr_clear,
 			 wrp->txep_bitmap | wrp->rxep_bitmap);
-	dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 }
 
 static void otg_timer(unsigned long _musb)
@@ -265,14 +241,14 @@ static void otg_timer(unsigned long _musb)
 	 * We poll because DSPS IP's won't expose several OTG-critical
 	 * status change events (from the transceiver) otherwise.
 	 */
-	devctl = dsps_readb(mregs, MUSB_DEVCTL);
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
 				usb_otg_state_string(musb->xceiv->otg->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 		skip_session = 1;
 		/* fall */
 
@@ -286,13 +262,13 @@ static void otg_timer(unsigned long _musb)
 			MUSB_HST_MODE(musb);
 		}
 		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
-			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+			musb_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
 		mod_timer(&glue->timer, jiffies +
 				msecs_to_jiffies(wrp->poll_timeout));
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
-		dsps_writel(musb->ctrl_base, wrp->coreintr_set,
+		musb_writel(musb->ctrl_base, wrp->coreintr_set,
 			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
 		break;
 	default:
@@ -315,29 +291,29 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	spin_lock_irqsave(&musb->lock, flags);
 
 	/* Get endpoint interrupts */
-	epintr = dsps_readl(reg_base, wrp->epintr_status);
+	epintr = musb_readl(reg_base, wrp->epintr_status);
 	musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
 	musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
 
 	if (epintr)
-		dsps_writel(reg_base, wrp->epintr_status, epintr);
+		musb_writel(reg_base, wrp->epintr_status, epintr);
 
 	/* Get usb core interrupts */
-	usbintr = dsps_readl(reg_base, wrp->coreintr_status);
+	usbintr = musb_readl(reg_base, wrp->coreintr_status);
 	if (!usbintr && !epintr)
 		goto out;
 
 	musb->int_usb =	(usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
 	if (usbintr)
-		dsps_writel(reg_base, wrp->coreintr_status, usbintr);
+		musb_writel(reg_base, wrp->coreintr_status, usbintr);
 
 	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
 			usbintr, epintr);
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
-		int drvvbus = dsps_readl(reg_base, wrp->status);
+		int drvvbus = musb_readl(reg_base, wrp->status);
 		void __iomem *mregs = musb->mregs;
-		u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
 		int err;
 
 		err = musb->int_usb & MUSB_INTR_VBUSERROR;
@@ -442,7 +418,7 @@ static int dsps_musb_init(struct musb *musb)
 	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
 
 	/* Returns zero if e.g. not clocked */
-	rev = dsps_readl(reg_base, wrp->revision);
+	rev = musb_readl(reg_base, wrp->revision);
 	if (!rev)
 		return -ENODEV;
 
@@ -463,14 +439,14 @@ static int dsps_musb_init(struct musb *musb)
 	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
 	/* Reset the musb */
-	dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
+	musb_writel(reg_base, wrp->control, (1 << wrp->reset));
 
 	musb->isr = dsps_interrupt;
 
 	/* reset the otgdisable bit, needed for host mode to work */
-	val = dsps_readl(reg_base, wrp->phy_utmi);
+	val = musb_readl(reg_base, wrp->phy_utmi);
 	val &= ~(1 << wrp->otg_disable);
-	dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
+	musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
 
 	/*
 	 *  Check whether the dsps version has babble control enabled.
@@ -478,11 +454,11 @@ static int dsps_musb_init(struct musb *musb)
 	 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
 	 * logic enabled.
 	 */
-	val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+	val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 	if (val & MUSB_BABBLE_RCV_DISABLE) {
 		glue->sw_babble_enabled = true;
 		val |= MUSB_BABBLE_SW_SESSION_CTRL;
-		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
 	}
 
 	return dsps_musb_dbg_init(musb, glue);
@@ -510,7 +486,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 	void __iomem *ctrl_base = musb->ctrl_base;
 	u32 reg;
 
-	reg = dsps_readl(ctrl_base, wrp->mode);
+	reg = musb_readl(ctrl_base, wrp->mode);
 
 	switch (mode) {
 	case MUSB_HOST:
@@ -523,8 +499,8 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 		 */
 		reg |= (1 << wrp->iddig_mux);
 
-		dsps_writel(ctrl_base, wrp->mode, reg);
-		dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		musb_writel(ctrl_base, wrp->mode, reg);
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
 		break;
 	case MUSB_PERIPHERAL:
 		reg |= (1 << wrp->iddig);
@@ -536,10 +512,10 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 		 */
 		reg |= (1 << wrp->iddig_mux);
 
-		dsps_writel(ctrl_base, wrp->mode, reg);
+		musb_writel(ctrl_base, wrp->mode, reg);
 		break;
 	case MUSB_OTG:
-		dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
 		break;
 	default:
 		dev_err(glue->dev, "unsupported mode %d\n", mode);
@@ -554,7 +530,7 @@ static bool dsps_sw_babble_control(struct musb *musb)
 	u8 babble_ctl;
 	bool session_restart =  false;
 
-	babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+	babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 	dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
 		babble_ctl);
 	/*
@@ -571,14 +547,14 @@ static bool dsps_sw_babble_control(struct musb *musb)
 		 * babble is due to noise, then set transmit idle (d7 bit)
 		 * to resume normal operation
 		 */
-		babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+		babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 		babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
-		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
 
 		/* wait till line monitor flag cleared */
 		dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
 		do {
-			babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
+			babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
 			udelay(1);
 		} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
 
@@ -896,13 +872,13 @@ static int dsps_suspend(struct device *dev)
 		return 0;
 
 	mbase = musb->ctrl_base;
-	glue->context.control = dsps_readl(mbase, wrp->control);
-	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
-	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
-	glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
-	glue->context.mode = dsps_readl(mbase, wrp->mode);
-	glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
-	glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
+	glue->context.control = musb_readl(mbase, wrp->control);
+	glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
+	glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
+	glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
+	glue->context.mode = musb_readl(mbase, wrp->mode);
+	glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
+	glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
 
 	return 0;
 }
@@ -918,13 +894,13 @@ static int dsps_resume(struct device *dev)
 		return 0;
 
 	mbase = musb->ctrl_base;
-	dsps_writel(mbase, wrp->control, glue->context.control);
-	dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
-	dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
-	dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
-	dsps_writel(mbase, wrp->mode, glue->context.mode);
-	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
-	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+	musb_writel(mbase, wrp->control, glue->context.control);
+	musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
+	musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+	musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+	musb_writel(mbase, wrp->mode, glue->context.mode);
+	musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+	musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
 		mod_timer(&glue->timer, jiffies +