Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (30 commits)
  m68k: Fix --build-id breakage for sun3
  m68k: Wire up sys_restart_syscall
  fbdev: Kill Atari vblank cursor blinking
  m68k: zorro - Use %pR to print resources
  m68k: dio - Kill resource_size_t format warnings
  m68k: dmasound - Kill warn_unused_result warnings
  m68k: zorro - Kill warn_unused_result warnings
  m68k: dio - Kill warn_unused_result warnings
  m68k: atafb - Kill warn_unused_result warnings
  m68k: amiserial - Kill warn_unused_result warnings
  m68k: ser_a2232 - Kill warn_unused_result warnings
  m68k: vme_scc - Kill warn_unused_result warnings
  m68k: sun3 core - Kill warn_unused_result warnings
  m68k: mvme147 core - Kill warn_unused_result warnings
  m68k: mac core - Kill warn_unused_result warnings
  m68k: hp300 core - Kill warn_unused_result warnings
  m68k: atari core - Kill warn_unused_result warnings
  m68k: apollo core - Kill warn_unused_result warnings
  m68k: amiga core - Kill warn_unused_result warnings
  m68k: Kill several external declarations in source files
  ...

19 files changed, 772 insertions, 431 deletions

diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 4b1d4ac960f1..8df436ff7068 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -156,7 +156,7 @@ static volatile int fdc_busy = -1;
 static volatile int fdc_nested;
 static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
  
-static DECLARE_WAIT_QUEUE_HEAD(motor_wait);
+static DECLARE_COMPLETION(motor_on_completion);
 
 static volatile int selected = -1;	/* currently selected drive */
 
@@ -184,8 +184,7 @@ static unsigned char mfmencode[16]={
 static unsigned char mfmdecode[128];
 
 /* floppy internal millisecond timer stuff */
-static volatile int ms_busy = -1;
-static DECLARE_WAIT_QUEUE_HEAD(ms_wait);
+static DECLARE_COMPLETION(ms_wait_completion);
 #define MS_TICKS ((amiga_eclock+50)/1000)
 
 /*
@@ -211,8 +210,7 @@ static int fd_device[4] = { 0, 0, 0, 0 };
 
 static irqreturn_t ms_isr(int irq, void *dummy)
 {
-	ms_busy = -1;
-	wake_up(&ms_wait);
+	complete(&ms_wait_completion);
 	return IRQ_HANDLED;
 }
 
@@ -220,19 +218,17 @@ static irqreturn_t ms_isr(int irq, void *dummy)
    A more generic routine would do a schedule a la timer.device */
 static void ms_delay(int ms)
 {
-	unsigned long flags;
 	int ticks;
+	static DEFINE_MUTEX(mutex);
+
 	if (ms > 0) {
-		local_irq_save(flags);
-		while (ms_busy == 0)
-			sleep_on(&ms_wait);
-		ms_busy = 0;
-		local_irq_restore(flags);
+		mutex_lock(&mutex);
 		ticks = MS_TICKS*ms-1;
 		ciaa.tblo=ticks%256;
 		ciaa.tbhi=ticks/256;
 		ciaa.crb=0x19; /*count eclock, force load, one-shoot, start */
-		sleep_on(&ms_wait);
+		wait_for_completion(&ms_wait_completion);
+		mutex_unlock(&mutex);
 	}
 }
 
@@ -254,8 +250,7 @@ static void get_fdc(int drive)
 	printk("get_fdc: drive %d  fdc_busy %d  fdc_nested %d\n",drive,fdc_busy,fdc_nested);
 #endif
 	local_irq_save(flags);
-	while (!try_fdc(drive))
-		sleep_on(&fdc_wait);
+	wait_event(fdc_wait, try_fdc(drive));
 	fdc_busy = drive;
 	fdc_nested++;
 	local_irq_restore(flags);
@@ -330,7 +325,7 @@ static void fd_deselect (int drive)
 static void motor_on_callback(unsigned long nr)
 {
 	if (!(ciaa.pra & DSKRDY) || --on_attempts == 0) {
-		wake_up (&motor_wait);
+		complete_all(&motor_on_completion);
 	} else {
 		motor_on_timer.expires = jiffies + HZ/10;
 		add_timer(&motor_on_timer);
@@ -347,11 +342,12 @@ static int fd_motor_on(int nr)
 		unit[nr].motor = 1;
 		fd_select(nr);
 
+		INIT_COMPLETION(motor_on_completion);
 		motor_on_timer.data = nr;
 		mod_timer(&motor_on_timer, jiffies + HZ/2);
 
 		on_attempts = 10;
-		sleep_on (&motor_wait);
+		wait_for_completion(&motor_on_completion);
 		fd_deselect(nr);
 	}
 
@@ -582,8 +578,7 @@ static void raw_read(int drive)
 {
 	drive&=3;
 	get_fdc(drive);
-	while (block_flag)
-		sleep_on(&wait_fd_block);
+	wait_event(wait_fd_block, !block_flag);
 	fd_select(drive);
 	/* setup adkcon bits correctly */
 	custom.adkcon = ADK_MSBSYNC;
@@ -598,8 +593,7 @@ static void raw_read(int drive)
 
 	block_flag = 1;
 
-	while (block_flag)
-		sleep_on (&wait_fd_block);
+	wait_event(wait_fd_block, !block_flag);
 
 	custom.dsklen = 0;
 	fd_deselect(drive);
@@ -616,8 +610,7 @@ static int raw_write(int drive)
 		rel_fdc();
 		return 0;
 	}
-	while (block_flag)
-		sleep_on(&wait_fd_block);
+	wait_event(wait_fd_block, !block_flag);
 	fd_select(drive);
 	/* clear adkcon bits */
 	custom.adkcon = ADK_PRECOMP1|ADK_PRECOMP0|ADK_WORDSYNC|ADK_MSBSYNC;
@@ -1294,8 +1287,7 @@ static int non_int_flush_track (unsigned long nr)
 			writepending = 0;
 			return 0;
 		}
-		while (block_flag == 2)
-			sleep_on (&wait_fd_block);
+		wait_event(wait_fd_block, block_flag != 2);
 	}
 	else {
 		local_irq_restore(flags);
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 4e0cfdeab146..a58869ea8513 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1963,6 +1963,7 @@ static int __init rs_init(void)
 {
 	unsigned long flags;
 	struct serial_state * state;
+	int error;
 
 	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL))
 		return -ENODEV;
@@ -1975,8 +1976,11 @@ static int __init rs_init(void)
 	 *  We request SERDAT and SERPER only, because the serial registers are
 	 *  too spreaded over the custom register space
 	 */
-	if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4, "amiserial [Paula]"))
-		return -EBUSY;
+	if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4,
+				"amiserial [Paula]")) {
+		error = -EBUSY;
+		goto fail_put_tty_driver;
+	}
 
 	IRQ_ports = NULL;
 
@@ -1997,8 +2001,9 @@ static int __init rs_init(void)
 	serial_driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(serial_driver, &serial_ops);
 
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
+	error = tty_register_driver(serial_driver);
+	if (error)
+		goto fail_release_mem_region;
 
 	state = rs_table;
 	state->magic = SSTATE_MAGIC;
@@ -2024,8 +2029,14 @@ static int __init rs_init(void)
 	local_irq_save(flags);
 
 	/* set ISRs, and then disable the rx interrupts */
-	request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
-	request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, "serial RX", state);
+	error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
+	if (error)
+		goto fail_unregister;
+
+	error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED,
+			    "serial RX", state);
+	if (error)
+		goto fail_free_irq;
 
 	/* turn off Rx and Tx interrupts */
 	custom.intena = IF_RBF | IF_TBE;
@@ -2045,6 +2056,16 @@ static int __init rs_init(void)
 	ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR);  /* inputs */
 
 	return 0;
+
+fail_free_irq:
+	free_irq(IRQ_AMIGA_TBE, state);
+fail_unregister:
+	tty_unregister_driver(serial_driver);
+fail_release_mem_region:
+	release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
+fail_put_tty_driver:
+	put_tty_driver(serial_driver);
+	return error;
 }
 
 static __exit void rs_exit(void) 
@@ -2064,6 +2085,9 @@ static __exit void rs_exit(void)
 	  kfree(info);
 	}
 
+	free_irq(IRQ_AMIGA_TBE, rs_table);
+	free_irq(IRQ_AMIGA_RBF, rs_table);
+
 	release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
 }
 
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 33872a219df6..33a2b531802e 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -718,6 +718,7 @@ static int __init a2232board_init(void)
 	u_char *from;
 	volatile u_char *to;
 	volatile struct a2232memory *mem;
+	int error, i;
 
 #ifdef CONFIG_SMP
 	return -ENODEV;	/* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */
@@ -797,8 +798,15 @@ static int __init a2232board_init(void)
 	*/
 	if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx?
 
-	request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, "A2232 serial VBL", a2232_driver_ID);
-	return 0;
+	error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0,
+			    "A2232 serial VBL", a2232_driver_ID);
+	if (error) {
+		for (i = 0; i < nr_a2232; i++)
+			zorro_release_device(zd_a2232[i]);
+		tty_unregister_driver(a2232_driver);
+		put_tty_driver(a2232_driver);
+	}
+	return error;
 }
 
 static void __exit a2232board_exit(void)
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index 0e8234bd0e19..994e1a58b987 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -198,6 +198,7 @@ static void scc_init_portstructs(void)
 static int mvme147_scc_init(void)
 {
 	struct scc_port *port;
+	int error;
 
 	printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
 	/* Init channel A */
@@ -207,14 +208,23 @@ static int mvme147_scc_init(void)
 	port->datap = port->ctrlp + 1;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-A TX", port);
-	request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail;
+	error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-A status", port);
-	request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_tx;
+	error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-A RX", port);
-	request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_stat;
+	error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -234,14 +244,23 @@ static int mvme147_scc_init(void)
 	port->datap = port->ctrlp + 1;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-B TX", port);
-	request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_spcond;
+	error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-B status", port);
-	request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_b_tx;
+	error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-B RX", port);
-	request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_stat;
+	error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -257,6 +276,23 @@ static int mvme147_scc_init(void)
 	scc_init_drivers();
 
 	return 0;
+
+fail_free_b_rx:
+	free_irq(MVME147_IRQ_SCCB_RX, port);
+fail_free_b_stat:
+	free_irq(MVME147_IRQ_SCCB_STAT, port);
+fail_free_b_tx:
+	free_irq(MVME147_IRQ_SCCB_TX, port);
+fail_free_a_spcond:
+	free_irq(MVME147_IRQ_SCCA_SPCOND, port);
+fail_free_a_rx:
+	free_irq(MVME147_IRQ_SCCA_RX, port);
+fail_free_a_stat:
+	free_irq(MVME147_IRQ_SCCA_STAT, port);
+fail_free_a_tx:
+	free_irq(MVME147_IRQ_SCCA_TX, port);
+fail:
+	return error;
 }
 #endif
 
@@ -265,6 +301,7 @@ static int mvme147_scc_init(void)
 static int mvme162_scc_init(void)
 {
 	struct scc_port *port;
+	int error;
 
 	if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
 		return (-ENODEV);
@@ -277,14 +314,23 @@ static int mvme162_scc_init(void)
 	port->datap = port->ctrlp + 2;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-A TX", port);
-	request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail;
+	error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-A status", port);
-	request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_tx;
+	error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-A RX", port);
-	request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_stat;
+	error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -304,14 +350,22 @@ static int mvme162_scc_init(void)
 	port->datap = port->ctrlp + 2;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-B TX", port);
-	request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_spcond;
+	error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-B status", port);
-	request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_b_tx;
+	error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-B RX", port);
-	request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_stat;
+	error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_rx;
 
 	{
 		SCC_ACCESS_INIT(port);	/* Either channel will do */
@@ -328,6 +382,23 @@ static int mvme162_scc_init(void)
 	scc_init_drivers();
 
 	return 0;
+
+fail_free_b_rx:
+	free_irq(MVME162_IRQ_SCCB_RX, port);
+fail_free_b_stat:
+	free_irq(MVME162_IRQ_SCCB_STAT, port);
+fail_free_b_tx:
+	free_irq(MVME162_IRQ_SCCB_TX, port);
+fail_free_a_spcond:
+	free_irq(MVME162_IRQ_SCCA_SPCOND, port);
+fail_free_a_rx:
+	free_irq(MVME162_IRQ_SCCA_RX, port);
+fail_free_a_stat:
+	free_irq(MVME162_IRQ_SCCA_STAT, port);
+fail_free_a_tx:
+	free_irq(MVME162_IRQ_SCCA_TX, port);
+fail:
+	return error;
 }
 #endif
 
@@ -336,6 +407,7 @@ static int mvme162_scc_init(void)
 static int bvme6000_scc_init(void)
 {
 	struct scc_port *port;
+	int error;
 
 	printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
 	/* Init channel A */
@@ -345,14 +417,23 @@ static int bvme6000_scc_init(void)
 	port->datap = port->ctrlp + 4;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-A TX", port);
-	request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail;
+	error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-A status", port);
-	request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_tx;
+	error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-A RX", port);
-	request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_stat;
+	error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -372,14 +453,22 @@ static int bvme6000_scc_init(void)
 	port->datap = port->ctrlp + 4;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-B TX", port);
-	request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_spcond;
+	error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-B status", port);
-	request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_b_tx;
+	error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-B RX", port);
-	request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_stat;
+	error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_rx;
 
 	{
 		SCC_ACCESS_INIT(port);	/* Either channel will do */
@@ -393,6 +482,23 @@ static int bvme6000_scc_init(void)
 	scc_init_drivers();
 
 	return 0;
+
+fail:
+	free_irq(BVME_IRQ_SCCA_STAT, port);
+fail_free_a_tx:
+	free_irq(BVME_IRQ_SCCA_RX, port);
+fail_free_a_stat:
+	free_irq(BVME_IRQ_SCCA_SPCOND, port);
+fail_free_a_rx:
+	free_irq(BVME_IRQ_SCCB_TX, port);
+fail_free_a_spcond:
+	free_irq(BVME_IRQ_SCCB_STAT, port);
+fail_free_b_tx:
+	free_irq(BVME_IRQ_SCCB_RX, port);
+fail_free_b_stat:
+	free_irq(BVME_IRQ_SCCB_SPCOND, port);
+fail_free_b_rx:
+	return error;
 }
 #endif
 
diff --git a/drivers/dio/dio-sysfs.c b/drivers/dio/dio-sysfs.c
index f46463038847..ee1a3b59bd4e 100644
--- a/drivers/dio/dio-sysfs.c
+++ b/drivers/dio/dio-sysfs.c
@@ -58,20 +58,25 @@ static ssize_t dio_show_resource(struct device *dev, struct device_attribute *at
 	struct dio_dev *d = to_dio_dev(dev);
 
 	return sprintf(buf, "0x%08lx 0x%08lx 0x%08lx\n",
-		       dio_resource_start(d), dio_resource_end(d),
+		       (unsigned long)dio_resource_start(d),
+		       (unsigned long)dio_resource_end(d),
 		       dio_resource_flags(d));
 }
 static DEVICE_ATTR(resource, S_IRUGO, dio_show_resource, NULL);
 
-void dio_create_sysfs_dev_files(struct dio_dev *d)
+int dio_create_sysfs_dev_files(struct dio_dev *d)
 {
 	struct device *dev = &d->dev;
+	int error;
 
 	/* current configuration's attributes */
-	device_create_file(dev, &dev_attr_id);
-	device_create_file(dev, &dev_attr_ipl);
-	device_create_file(dev, &dev_attr_secid);
-	device_create_file(dev, &dev_attr_name);
-	device_create_file(dev, &dev_attr_resource);
+	if ((error = device_create_file(dev, &dev_attr_id)) ||
+	    (error = device_create_file(dev, &dev_attr_ipl)) ||
+	    (error = device_create_file(dev, &dev_attr_secid)) ||
+	    (error = device_create_file(dev, &dev_attr_name)) ||
+	    (error = device_create_file(dev, &dev_attr_resource)))
+		return error;
+
+	return 0;
 }
 
diff --git a/drivers/dio/dio.c b/drivers/dio/dio.c
index 07f274f853d9..10c3c498358c 100644
--- a/drivers/dio/dio.c
+++ b/drivers/dio/dio.c
@@ -173,6 +173,7 @@ static int __init dio_init(void)
 	mm_segment_t fs;
 	int i;
 	struct dio_dev *dev;
+	int error;
 
 	if (!MACH_IS_HP300)
 		return 0;
@@ -182,7 +183,11 @@ static int __init dio_init(void)
 	/* Initialize the DIO bus */ 
 	INIT_LIST_HEAD(&dio_bus.devices);
 	strcpy(dio_bus.dev.bus_id, "dio");
-	device_register(&dio_bus.dev);
+	error = device_register(&dio_bus.dev);
+	if (error) {
+		pr_err("DIO: Error registering dio_bus\n");
+		return error;
+	}
 
 	/* Request all resources */
 	dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
@@ -252,8 +257,15 @@ static int __init dio_init(void)
 
 		if (scode >= DIOII_SCBASE)
 			iounmap(va);
-		device_register(&dev->dev);
-		dio_create_sysfs_dev_files(dev);
+		error = device_register(&dev->dev);
+		if (error) {
+			pr_err("DIO: Error registering device %s\n",
+			       dev->name);
+			continue;
+		}
+		error = dio_create_sysfs_dev_files(dev);
+		if (error)
+			dev_err(&dev->dev, "Error creating sysfs files\n");
         }
 	return 0;
 }
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index e39e33e797da..be2b657546ef 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_FB_DDC)           += fb_ddc.o
 obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
 
 # Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p.o
+obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
 obj-$(CONFIG_FB_ARC)              += arcfb.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
 obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
@@ -72,7 +72,7 @@ obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
 obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
 obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o
 obj-$(CONFIG_FB_ACORN)            += acornfb.o
-obj-$(CONFIG_FB_ATARI)            += atafb.o c2p.o atafb_mfb.o \
+obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
 obj-$(CONFIG_FB_MAC)              += macfb.o
 obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index b8e9a8682f2d..100f23661465 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -2159,9 +2159,9 @@ static void amifb_imageblit(struct fb_info *info, const struct fb_image *image)
 			src += pitch;
 		}
 	} else {
-		c2p(info->screen_base, image->data, dx, dy, width, height,
-		    par->next_line, par->next_plane, image->width,
-		    info->var.bits_per_pixel);
+		c2p_planar(info->screen_base, image->data, dx, dy, width,
+			   height, par->next_line, par->next_plane,
+			   image->width, info->var.bits_per_pixel);
 	}
 }
 
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 77eb8b34fbfa..8058572a7428 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -122,7 +122,6 @@ static struct atafb_par {
 	void *screen_base;
 	int yres_virtual;
 	u_long next_line;
-	u_long next_plane;
 #if defined ATAFB_TT || defined ATAFB_STE
 	union {
 		struct {
@@ -149,6 +148,7 @@ static struct atafb_par {
 			short mono;
 			short ste_mode;
 			short bpp;
+			u32 pseudo_palette[16];
 		} falcon;
 #endif
 		/* Nothing needed for external mode */
@@ -614,7 +614,7 @@ static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 	fix->xpanstep = 0;
 	fix->ypanstep = 1;
 	fix->ywrapstep = 0;
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	fix->accel = FB_ACCEL_ATARIBLITT;
 	return 0;
 }
@@ -691,6 +691,7 @@ static int tt_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
 		return -EINVAL;
 	par->yres_virtual = yres_virtual;
 	par->screen_base = screen_base + var->yoffset * linelen;
+	par->next_line = linelen;
 	return 0;
 }
 
@@ -884,10 +885,6 @@ static int vdl_prescale[4][3] = {
 /* Default hsync timing [mon_type] in picoseconds */
 static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 };
 
-#ifdef FBCON_HAS_CFB16
-static u16 fbcon_cfb16_cmap[16];
-#endif
-
 static inline int hxx_prescale(struct falcon_hw *hw)
 {
 	return hw->ste_mode ? 16
@@ -918,7 +915,7 @@ static int falcon_encode_fix(struct fb_fix_screeninfo *fix,
 		fix->visual = FB_VISUAL_TRUECOLOR;
 		fix->xpanstep = 2;
 	}
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	fix->accel = FB_ACCEL_ATARIBLITT;
 	return 0;
 }
@@ -1394,14 +1391,7 @@ set_screen_base:
 	par->screen_base = screen_base + var->yoffset * linelen;
 	par->hw.falcon.xoffset = 0;
 
-	// FIXME!!! sort of works, no crash
-	//par->next_line = linelen;
-	//par->next_plane = yres_virtual * linelen;
 	par->next_line = linelen;
-	par->next_plane = 2;
-	// crashes
-	//par->next_plane = linelen;
-	//par->next_line  = yres_virtual * linelen;
 
 	return 0;
 }
@@ -1735,10 +1725,10 @@ static int falcon_setcolreg(unsigned int regno, unsigned int red,
 			(((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
 			(((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
 			((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
-#ifdef FBCON_HAS_CFB16
-		fbcon_cfb16_cmap[regno] = ((red & 0xf800) |
-					   ((green & 0xfc00) >> 5) |
-					   ((blue & 0xf800) >> 11));
+#ifdef ATAFB_FALCON
+		((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
+						       ((green & 0xfc00) >> 5) |
+						       ((blue & 0xf800) >> 11));
 #endif
 	}
 	return 0;
@@ -1852,7 +1842,7 @@ static int stste_encode_fix(struct fb_fix_screeninfo *fix,
 		fix->ypanstep = 0;
 	}
 	fix->ywrapstep = 0;
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	fix->accel = FB_ACCEL_ATARIBLITT;
 	return 0;
 }
@@ -1910,6 +1900,7 @@ static int stste_decode_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	par->yres_virtual = yres_virtual;
 	par->screen_base = screen_base + var->yoffset * linelen;
+	par->next_line = linelen;
 	return 0;
 }
 
@@ -2169,7 +2160,7 @@ static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 	fix->xpanstep = 0;
 	fix->ypanstep = 0;
 	fix->ywrapstep = 0;
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	return 0;
 }
 
@@ -2184,6 +2175,8 @@ static int ext_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
 	    var->xoffset > 0 ||
 	    var->yoffset > 0)
 		return -EINVAL;
+
+	par->next_line = external_xres_virtual * external_depth / 8;
 	return 0;
 }
 
@@ -2443,42 +2436,6 @@ static void atafb_set_disp(struct fb_info *info)
 	atafb_get_fix(&info->fix, info);
 
 	info->screen_base = (void *)info->fix.smem_start;
-
-	switch (info->fix.type) {
-	case FB_TYPE_INTERLEAVED_PLANES:
-		switch (info->var.bits_per_pixel) {
-		case 2:
-			// display->dispsw = &fbcon_iplan2p2;
-			break;
-		case 4:
-			// display->dispsw = &fbcon_iplan2p4;
-			break;
-		case 8:
-			// display->dispsw = &fbcon_iplan2p8;
-			break;
-		}
-		break;
-	case FB_TYPE_PACKED_PIXELS:
-		switch (info->var.bits_per_pixel) {
-#ifdef FBCON_HAS_MFB
-		case 1:
-			// display->dispsw = &fbcon_mfb;
-			break;
-#endif
-#ifdef FBCON_HAS_CFB8
-		case 8:
-			// display->dispsw = &fbcon_cfb8;
-			break;
-#endif
-#ifdef FBCON_HAS_CFB16
-		case 16:
-			// display->dispsw = &fbcon_cfb16;
-			// display->dispsw_data = fbcon_cfb16_cmap;
-			break;
-#endif
-		}
-		break;
-	}
 }
 
 static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2549,6 +2506,13 @@ static void atafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 	if (!rect->width || !rect->height)
 		return;
 
+#ifdef ATAFB_FALCON
+	if (info->var.bits_per_pixel == 16) {
+		cfb_fillrect(info, rect);
+		return;
+	}
+#endif
+
 	/*
 	 * We could use hardware clipping but on many cards you get around
 	 * hardware clipping by writing to framebuffer directly.
@@ -2583,6 +2547,13 @@ static void atafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	u32 dx, dy, sx, sy, width, height;
 	int rev_copy = 0;
 
+#ifdef ATAFB_FALCON
+	if (info->var.bits_per_pixel == 16) {
+		cfb_copyarea(info, area);
+		return;
+	}
+#endif
+
 	/* clip the destination */
 	x2 = area->dx + area->width;
 	y2 = area->dy + area->height;
@@ -2632,6 +2603,13 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
 	const char *src;
 	u32 dx, dy, width, height, pitch;
 
+#ifdef ATAFB_FALCON
+	if (info->var.bits_per_pixel == 16) {
+		cfb_imageblit(info, image);
+		return;
+	}
+#endif
+
 	/*
 	 * We could use hardware clipping but on many cards you get around
 	 * hardware clipping by writing to framebuffer directly like we are
@@ -2676,10 +2654,9 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
 			src += pitch;
 		}
 	} else {
-		// only used for logo; broken
-		c2p(info->screen_base, image->data, dx, dy, width, height,
-		    par->next_line, par->next_plane, image->width,
-		    info->var.bits_per_pixel);
+		c2p_iplan2(info->screen_base, image->data, dx, dy, width,
+			   height, par->next_line, image->width,
+			   info->var.bits_per_pixel);
 	}
 }
 
@@ -3098,8 +3075,7 @@ int __init atafb_setup(char *options)
 
 int __init atafb_init(void)
 {
-	int pad;
-	int detected_mode;
+	int pad, detected_mode, error;
 	unsigned int defmode = 0;
 	unsigned long mem_req;
 
@@ -3139,8 +3115,12 @@ int __init atafb_init(void)
 			printk("atafb_init: initializing Falcon hw\n");
 			fbhw = &falcon_switch;
 			atafb_ops.fb_setcolreg = &falcon_setcolreg;
-			request_irq(IRQ_AUTO_4, falcon_vbl_switcher, IRQ_TYPE_PRIO,
-			            "framebuffer/modeswitch", falcon_vbl_switcher);
+			error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
+					    IRQ_TYPE_PRIO,
+					    "framebuffer/modeswitch",
+					    falcon_vbl_switcher);
+			if (error)
+				return error;
 			defmode = DEFMODE_F30;
 			break;
 		}
@@ -3225,6 +3205,10 @@ int __init atafb_init(void)
 	// tries to read from HW which may not be initialized yet
 	// so set sane var first, then call atafb_set_par
 	atafb_get_var(&fb_info.var, &fb_info);
+
+#ifdef ATAFB_FALCON
+	fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette;
+#endif
 	fb_info.flags = FBINFO_FLAG_DEFAULT;
 
 	if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb,
diff --git a/drivers/video/c2p.c b/drivers/video/c2p.c
deleted file mode 100644
index 376bc07ff952..000000000000
--- a/drivers/video/c2p.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- *  Fast C2P (Chunky-to-Planar) Conversion
- *
- *  Copyright (C) 2003 Geert Uytterhoeven
- *
- *  NOTES:
- *    - This code was inspired by Scout's C2P tutorial
- *    - It assumes to run on a big endian system
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include "c2p.h"
-
-
-    /*
-     *  Basic transpose step
-     */
-
-#define _transp(d, i1, i2, shift, mask)			\
-    do {						\
-	u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;	\
-	d[i1] ^= t;					\
-	d[i2] ^= t << shift;				\
-    } while (0)
-
-static inline u32 get_mask(int n)
-{
-    switch (n) {
-	case 1:
-	    return 0x55555555;
-	    break;
-
-	case 2:
-	    return 0x33333333;
-	    break;
-
-	case 4:
-	    return 0x0f0f0f0f;
-	    break;
-
-	case 8:
-	    return 0x00ff00ff;
-	    break;
-
-	case 16:
-	    return 0x0000ffff;
-	    break;
-    }
-    return 0;
-}
-
-#define transp_nx1(d, n)				\
-    do {						\
-	u32 mask = get_mask(n);				\
-	/* First block */				\
-	_transp(d, 0, 1, n, mask);			\
-	/* Second block */				\
-	_transp(d, 2, 3, n, mask);			\
-	/* Third block */				\
-	_transp(d, 4, 5, n, mask);			\
-	/* Fourth block */				\
-	_transp(d, 6, 7, n, mask);			\
-    } while (0)
-
-#define transp_nx2(d, n)				\
-    do {						\
-	u32 mask = get_mask(n);				\
-	/* First block */				\
-	_transp(d, 0, 2, n, mask);			\
-	_transp(d, 1, 3, n, mask);			\
-	/* Second block */				\
-	_transp(d, 4, 6, n, mask);			\
-	_transp(d, 5, 7, n, mask);			\
-    } while (0)
-
-#define transp_nx4(d, n)				\
-    do {						\
-	u32 mask = get_mask(n);				\
-	_transp(d, 0, 4, n, mask);			\
-	_transp(d, 1, 5, n, mask);			\
-	_transp(d, 2, 6, n, mask);			\
-	_transp(d, 3, 7, n, mask);			\
-    } while (0)
-
-#define transp(d, n, m)	transp_nx ## m(d, n)
-
-
-    /*
-     *  Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words
-     *  containing
-     *    - 32 8-bit chunky pixels on input
-     *    - permuted planar data on output
-     */
-
-static void c2p_8bpp(u32 d[8])
-{
-    transp(d, 16, 4);
-    transp(d, 8, 2);
-    transp(d, 4, 1);
-    transp(d, 2, 4);
-    transp(d, 1, 2);
-}
-
-
-    /*
-     *  Array containing the permution indices of the planar data after c2p
-     */
-
-static const int perm_c2p_8bpp[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
-
-
-    /*
-     *  Compose two values, using a bitmask as decision value
-     *  This is equivalent to (a & mask) | (b & ~mask)
-     */
-
-static inline unsigned long comp(unsigned long a, unsigned long b,
-				 unsigned long mask)
-{
-	return ((a ^ b) & mask) ^ b;
-}
-
-
-    /*
-     *  Store a full block of planar data after c2p conversion
-     */
-
-static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8])
-{
-    int i;
-
-    for (i = 0; i < bpp; i++, dst += dst_inc)
-	*(u32 *)dst = d[perm_c2p_8bpp[i]];
-}
-
-
-    /*
-     *  Store a partial block of planar data after c2p conversion
-     */
-
-static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp,
-				       u32 d[8], u32 mask)
-{
-    int i;
-
-    for (i = 0; i < bpp; i++, dst += dst_inc)
-	*(u32 *)dst = comp(d[perm_c2p_8bpp[i]], *(u32 *)dst, mask);
-}
-
-
-    /*
-     *  c2p - Copy 8-bit chunky image data to a planar frame buffer
-     *  @dst: Starting address of the planar frame buffer
-     *  @dx: Horizontal destination offset (in pixels)
-     *  @dy: Vertical destination offset (in pixels)
-     *  @width: Image width (in pixels)
-     *  @height: Image height (in pixels)
-     *  @dst_nextline: Frame buffer offset to the next line (in bytes)
-     *  @dst_nextplane: Frame buffer offset to the next plane (in bytes)
-     *  @src_nextline: Image offset to the next line (in bytes)
-     *  @bpp: Bits per pixel of the planar frame buffer (1-8)
-     */
-
-void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
-	 u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, u32 bpp)
-{
-    int dst_idx;
-    u32 d[8], first, last, w;
-    const u8 *c;
-    u8 *p;
-
-    dst += dy*dst_nextline+(dx & ~31);
-    dst_idx = dx % 32;
-    first = ~0UL >> dst_idx;
-    last = ~(~0UL >> ((dst_idx+width) % 32));
-    while (height--) {
-	c = src;
-	p = dst;
-	w = width;
-	if (dst_idx+width <= 32) {
-	    /* Single destination word */
-	    first &= last;
-	    memset(d, 0, sizeof(d));
-	    memcpy((u8 *)d+dst_idx, c, width);
-	    c += width;
-	    c2p_8bpp(d);
-	    store_planar_masked(p, dst_nextplane, bpp, d, first);
-	    p += 4;
-	} else {
-	    /* Multiple destination words */
-	    w = width;
-	    /* Leading bits */
-	    if (dst_idx) {
-		w = 32 - dst_idx;
-		memset(d, 0, dst_idx);
-		memcpy((u8 *)d+dst_idx, c, w);
-		c += w;
-		c2p_8bpp(d);
-		store_planar_masked(p, dst_nextplane, bpp, d, first);
-		p += 4;
-		w = width-w;
-	    }
-	    /* Main chunk */
-	    while (w >= 32) {
-		memcpy(d, c, 32);
-		c += 32;
-		c2p_8bpp(d);
-		store_planar(p, dst_nextplane, bpp, d);
-		p += 4;
-		w -= 32;
-	    }
-	    /* Trailing bits */
-	    w %= 32;
-	    if (w > 0) {
-		memcpy(d, c, w);
-		memset((u8 *)d+w, 0, 32-w);
-		c2p_8bpp(d);
-		store_planar_masked(p, dst_nextplane, bpp, d, last);
-	    }
-	}
-	src += src_nextline;
-	dst += dst_nextline;
-    }
-}
-EXPORT_SYMBOL_GPL(c2p);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/c2p.h b/drivers/video/c2p.h
index c77cbf17e043..6c38d40427d8 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/c2p.h
@@ -1,7 +1,7 @@
 /*
  *  Fast C2P (Chunky-to-Planar) Conversion
  *
- *  Copyright (C) 2003 Geert Uytterhoeven
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive
@@ -10,7 +10,10 @@
 
 #include <linux/types.h>
 
-extern void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
-		u32 dst_nextline, u32 dst_nextplane, u32 src_nextline,
-		u32 bpp);
+extern void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		       u32 height, u32 dst_nextline, u32 dst_nextplane,
+		       u32 src_nextline, u32 bpp);
 
+extern void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		       u32 height, u32 dst_nextline, u32 src_nextline,
+		       u32 bpp);
diff --git a/drivers/video/c2p_core.h b/drivers/video/c2p_core.h
new file mode 100644
index 000000000000..e1035a865fb9
--- /dev/null
+++ b/drivers/video/c2p_core.h
@@ -0,0 +1,153 @@
+/*
+ *  Fast C2P (Chunky-to-Planar) Conversion
+ *
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ *  NOTES:
+ *    - This code was inspired by Scout's C2P tutorial
+ *    - It assumes to run on a big endian system
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+
+    /*
+     *  Basic transpose step
+     */
+
+static inline void _transp(u32 d[], unsigned int i1, unsigned int i2,
+			   unsigned int shift, u32 mask)
+{
+	u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;
+
+	d[i1] ^= t;
+	d[i2] ^= t << shift;
+}
+
+
+extern void c2p_unsupported(void);
+
+static inline u32 get_mask(unsigned int n)
+{
+	switch (n) {
+	case 1:
+		return 0x55555555;
+
+	case 2:
+		return 0x33333333;
+
+	case 4:
+		return 0x0f0f0f0f;
+
+	case 8:
+		return 0x00ff00ff;
+
+	case 16:
+		return 0x0000ffff;
+	}
+
+	c2p_unsupported();
+	return 0;
+}
+
+
+    /*
+     *  Transpose operations on 8 32-bit words
+     */
+
+static inline void transp8(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 1:
+		/* First n x 1 block */
+		_transp(d, 0, 1, n, mask);
+		/* Second n x 1 block */
+		_transp(d, 2, 3, n, mask);
+		/* Third n x 1 block */
+		_transp(d, 4, 5, n, mask);
+		/* Fourth n x 1 block */
+		_transp(d, 6, 7, n, mask);
+		return;
+
+	case 2:
+		/* First n x 2 block */
+		_transp(d, 0, 2, n, mask);
+		_transp(d, 1, 3, n, mask);
+		/* Second n x 2 block */
+		_transp(d, 4, 6, n, mask);
+		_transp(d, 5, 7, n, mask);
+		return;
+
+	case 4:
+		/* Single n x 4 block */
+		_transp(d, 0, 4, n, mask);
+		_transp(d, 1, 5, n, mask);
+		_transp(d, 2, 6, n, mask);
+		_transp(d, 3, 7, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
+
+
+    /*
+     *  Transpose operations on 4 32-bit words
+     */
+
+static inline void transp4(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 1:
+		/* First n x 1 block */
+		_transp(d, 0, 1, n, mask);
+		/* Second n x 1 block */
+		_transp(d, 2, 3, n, mask);
+		return;
+
+	case 2:
+		/* Single n x 2 block */
+		_transp(d, 0, 2, n, mask);
+		_transp(d, 1, 3, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
+
+
+    /*
+     *  Transpose operations on 4 32-bit words (reverse order)
+     */
+
+static inline void transp4x(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 2:
+		/* Single n x 2 block */
+		_transp(d, 2, 0, n, mask);
+		_transp(d, 3, 1, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
+
+
+    /*
+     *  Compose two values, using a bitmask as decision value
+     *  This is equivalent to (a & mask) | (b & ~mask)
+     */
+
+static inline u32 comp(u32 a, u32 b, u32 mask)
+{
+	return ((a ^ b) & mask) ^ b;
+}
diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/c2p_iplan2.c
new file mode 100644
index 000000000000..19156dc6158c
--- /dev/null
+++ b/drivers/video/c2p_iplan2.c
@@ -0,0 +1,153 @@
+/*
+ *  Fast C2P (Chunky-to-Planar) Conversion
+ *
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/unaligned.h>
+
+#include "c2p.h"
+#include "c2p_core.h"
+
+
+    /*
+     *  Perform a full C2P step on 16 8-bit pixels, stored in 4 32-bit words
+     *  containing
+     *    - 16 8-bit chunky pixels on input
+     *    - permutated planar data (2 planes per 32-bit word) on output
+     */
+
+static void c2p_16x8(u32 d[4])
+{
+	transp4(d, 8, 2);
+	transp4(d, 1, 2);
+	transp4x(d, 16, 2);
+	transp4x(d, 2, 2);
+	transp4(d, 4, 1);
+}
+
+
+    /*
+     *  Array containing the permutation indices of the planar data after c2p
+     */
+
+static const int perm_c2p_16x8[4] = { 1, 3, 0, 2 };
+
+
+    /*
+     *  Store a full block of iplan2 data after c2p conversion
+     */
+
+static inline void store_iplan2(void *dst, u32 bpp, u32 d[4])
+{
+	int i;
+
+	for (i = 0; i < bpp/2; i++, dst += 4)
+		put_unaligned_be32(d[perm_c2p_16x8[i]], dst);
+}
+
+
+    /*
+     *  Store a partial block of iplan2 data after c2p conversion
+     */
+
+static inline void store_iplan2_masked(void *dst, u32 bpp, u32 d[4], u32 mask)
+{
+	int i;
+
+	for (i = 0; i < bpp/2; i++, dst += 4)
+		put_unaligned_be32(comp(d[perm_c2p_16x8[i]],
+					get_unaligned_be32(dst), mask),
+				   dst);
+}
+
+
+    /*
+     *  c2p_iplan2 - Copy 8-bit chunky image data to an interleaved planar
+     *  frame buffer with 2 bytes of interleave
+     *  @dst: Starting address of the planar frame buffer
+     *  @dx: Horizontal destination offset (in pixels)
+     *  @dy: Vertical destination offset (in pixels)
+     *  @width: Image width (in pixels)
+     *  @height: Image height (in pixels)
+     *  @dst_nextline: Frame buffer offset to the next line (in bytes)
+     *  @src_nextline: Image offset to the next line (in bytes)
+     *  @bpp: Bits per pixel of the planar frame buffer (2, 4, or 8)
+     */
+
+void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		u32 height, u32 dst_nextline, u32 src_nextline, u32 bpp)
+{
+	union {
+		u8 pixels[16];
+		u32 words[4];
+	} d;
+	u32 dst_idx, first, last, w;
+	const u8 *c;
+	void *p;
+
+	dst += dy*dst_nextline+(dx & ~15)*bpp;
+	dst_idx = dx % 16;
+	first = 0xffffU >> dst_idx;
+	first |= first << 16;
+	last = 0xffffU ^ (0xffffU >> ((dst_idx+width) % 16));
+	last |= last << 16;
+	while (height--) {
+		c = src;
+		p = dst;
+		w = width;
+		if (dst_idx+width <= 16) {
+			/* Single destination word */
+			first &= last;
+			memset(d.pixels, 0, sizeof(d));
+			memcpy(d.pixels+dst_idx, c, width);
+			c += width;
+			c2p_16x8(d.words);
+			store_iplan2_masked(p, bpp, d.words, first);
+			p += bpp*2;
+		} else {
+			/* Multiple destination words */
+			w = width;
+			/* Leading bits */
+			if (dst_idx) {
+				w = 16 - dst_idx;
+				memset(d.pixels, 0, dst_idx);
+				memcpy(d.pixels+dst_idx, c, w);
+				c += w;
+				c2p_16x8(d.words);
+				store_iplan2_masked(p, bpp, d.words, first);
+				p += bpp*2;
+				w = width-w;
+			}
+			/* Main chunk */
+			while (w >= 16) {
+				memcpy(d.pixels, c, 16);
+				c += 16;
+				c2p_16x8(d.words);
+				store_iplan2(p, bpp, d.words);
+				p += bpp*2;
+				w -= 16;
+			}
+			/* Trailing bits */
+			w %= 16;
+			if (w > 0) {
+				memcpy(d.pixels, c, w);
+				memset(d.pixels+w, 0, 16-w);
+				c2p_16x8(d.words);
+				store_iplan2_masked(p, bpp, d.words, last);
+			}
+		}
+		src += src_nextline;
+		dst += dst_nextline;
+	}
+}
+EXPORT_SYMBOL_GPL(c2p_iplan2);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/c2p_planar.c b/drivers/video/c2p_planar.c
new file mode 100644
index 000000000000..ec7ac8526f06
--- /dev/null
+++ b/drivers/video/c2p_planar.c
@@ -0,0 +1,156 @@
+/*
+ *  Fast C2P (Chunky-to-Planar) Conversion
+ *
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/unaligned.h>
+
+#include "c2p.h"
+#include "c2p_core.h"
+
+
+    /*
+     *  Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words
+     *  containing
+     *    - 32 8-bit chunky pixels on input
+     *    - permutated planar data (1 plane per 32-bit word) on output
+     */
+
+static void c2p_32x8(u32 d[8])
+{
+	transp8(d, 16, 4);
+	transp8(d, 8, 2);
+	transp8(d, 4, 1);
+	transp8(d, 2, 4);
+	transp8(d, 1, 2);
+}
+
+
+    /*
+     *  Array containing the permutation indices of the planar data after c2p
+     */
+
+static const int perm_c2p_32x8[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
+
+
+    /*
+     *  Store a full block of planar data after c2p conversion
+     */
+
+static inline void store_planar(void *dst, u32 dst_inc, u32 bpp, u32 d[8])
+{
+	int i;
+
+	for (i = 0; i < bpp; i++, dst += dst_inc)
+		put_unaligned_be32(d[perm_c2p_32x8[i]], dst);
+}
+
+
+    /*
+     *  Store a partial block of planar data after c2p conversion
+     */
+
+static inline void store_planar_masked(void *dst, u32 dst_inc, u32 bpp,
+				       u32 d[8], u32 mask)
+{
+	int i;
+
+	for (i = 0; i < bpp; i++, dst += dst_inc)
+		put_unaligned_be32(comp(d[perm_c2p_32x8[i]],
+					get_unaligned_be32(dst), mask),
+				   dst);
+}
+
+
+    /*
+     *  c2p_planar - Copy 8-bit chunky image data to a planar frame buffer
+     *  @dst: Starting address of the planar frame buffer
+     *  @dx: Horizontal destination offset (in pixels)
+     *  @dy: Vertical destination offset (in pixels)
+     *  @width: Image width (in pixels)
+     *  @height: Image height (in pixels)
+     *  @dst_nextline: Frame buffer offset to the next line (in bytes)
+     *  @dst_nextplane: Frame buffer offset to the next plane (in bytes)
+     *  @src_nextline: Image offset to the next line (in bytes)
+     *  @bpp: Bits per pixel of the planar frame buffer (1-8)
+     */
+
+void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		u32 height, u32 dst_nextline, u32 dst_nextplane,
+		u32 src_nextline, u32 bpp)
+{
+	union {
+		u8 pixels[32];
+		u32 words[8];
+	} d;
+	u32 dst_idx, first, last, w;
+	const u8 *c;
+	void *p;
+
+	dst += dy*dst_nextline+(dx & ~31);
+	dst_idx = dx % 32;
+	first = 0xffffffffU >> dst_idx;
+	last = ~(0xffffffffU >> ((dst_idx+width) % 32));
+	while (height--) {
+		c = src;
+		p = dst;
+		w = width;
+		if (dst_idx+width <= 32) {
+			/* Single destination word */
+			first &= last;
+			memset(d.pixels, 0, sizeof(d));
+			memcpy(d.pixels+dst_idx, c, width);
+			c += width;
+			c2p_32x8(d.words);
+			store_planar_masked(p, dst_nextplane, bpp, d.words,
+					    first);
+			p += 4;
+		} else {
+			/* Multiple destination words */
+			w = width;
+			/* Leading bits */
+			if (dst_idx) {
+				w = 32 - dst_idx;
+				memset(d.pixels, 0, dst_idx);
+				memcpy(d.pixels+dst_idx, c, w);
+				c += w;
+				c2p_32x8(d.words);
+				store_planar_masked(p, dst_nextplane, bpp,
+						    d.words, first);
+				p += 4;
+				w = width-w;
+			}
+			/* Main chunk */
+			while (w >= 32) {
+				memcpy(d.pixels, c, 32);
+				c += 32;
+				c2p_32x8(d.words);
+				store_planar(p, dst_nextplane, bpp, d.words);
+				p += 4;
+				w -= 32;
+			}
+			/* Trailing bits */
+			w %= 32;
+			if (w > 0) {
+				memcpy(d.pixels, c, w);
+				memset(d.pixels+w, 0, 32-w);
+				c2p_32x8(d.words);
+				store_planar_masked(p, dst_nextplane, bpp,
+						    d.words, last);
+			}
+		}
+		src += src_nextline;
+		dst += dst_nextline;
+	}
+}
+EXPORT_SYMBOL_GPL(c2p_planar);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 4bcff81b50e0..1657b9608b04 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -78,13 +78,6 @@
 #include <asm/fb.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#ifdef CONFIG_ATARI
-#include <asm/atariints.h>
-#endif
-#if defined(__mc68000__)
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#endif
 
 #include "fbcon.h"
 
@@ -155,9 +148,6 @@ static int fbcon_set_origin(struct vc_data *);
 
 #define CURSOR_DRAW_DELAY		(1)
 
-/* # VBL ints between cursor state changes */
-#define ATARI_CURSOR_BLINK_RATE		(42)
-
 static int vbl_cursor_cnt;
 static int fbcon_cursor_noblink;
 
@@ -403,20 +393,6 @@ static void fb_flashcursor(struct work_struct *work)
 	release_console_sem();
 }
 
-#ifdef CONFIG_ATARI
-static int cursor_blink_rate;
-static irqreturn_t fb_vbl_handler(int irq, void *dev_id)
-{
-	struct fb_info *info = dev_id;
-
-	if (vbl_cursor_cnt && --vbl_cursor_cnt == 0) {
-		schedule_work(&info->queue);	
-		vbl_cursor_cnt = cursor_blink_rate; 
-	}
-	return IRQ_HANDLED;
-}
-#endif
-	
 static void cursor_timer_handler(unsigned long dev_addr)
 {
 	struct fb_info *info = (struct fb_info *) dev_addr;
@@ -1017,15 +993,6 @@ static const char *fbcon_startup(void)
 		info->var.yres,
 		info->var.bits_per_pixel);
 
-#ifdef CONFIG_ATARI
-	if (MACH_IS_ATARI) {
-		cursor_blink_rate = ATARI_CURSOR_BLINK_RATE;
-		(void)request_irq(IRQ_AUTO_4, fb_vbl_handler,
-				IRQ_TYPE_PRIO, "framebuffer vbl",
-				info);
-	}
-#endif /* CONFIG_ATARI */
-
 	fbcon_add_cursor_timer(info);
 	fbcon_has_exited = 0;
 	return display_desc;
@@ -3454,11 +3421,6 @@ static void fbcon_exit(void)
 	if (fbcon_has_exited)
 		return;
 
-#ifdef CONFIG_ATARI
-	if (MACH_IS_ATARI)
-		free_irq(IRQ_AUTO_4, fb_vbl_handler);
-#endif
-
 	kfree((void *)softback_buf);
 	softback_buf = 0UL;
 
diff --git a/drivers/zorro/.gitignore b/drivers/zorro/.gitignore
new file mode 100644
index 000000000000..34f980bd8ff6
--- /dev/null
+++ b/drivers/zorro/.gitignore
@@ -0,0 +1,2 @@
+devlist.h
+gen-devlist
diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index 5290552d2ef7..1d2a772ea14c 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -77,17 +77,21 @@ static struct bin_attribute zorro_config_attr = {
 	.read = zorro_read_config,
 };
 
-void zorro_create_sysfs_dev_files(struct zorro_dev *z)
+int zorro_create_sysfs_dev_files(struct zorro_dev *z)
 {
 	struct device *dev = &z->dev;
+	int error;
 
 	/* current configuration's attributes */
-	device_create_file(dev, &dev_attr_id);
-	device_create_file(dev, &dev_attr_type);
-	device_create_file(dev, &dev_attr_serial);
-	device_create_file(dev, &dev_attr_slotaddr);
-	device_create_file(dev, &dev_attr_slotsize);
-	device_create_file(dev, &dev_attr_resource);
-	sysfs_create_bin_file(&dev->kobj, &zorro_config_attr);
+	if ((error = device_create_file(dev, &dev_attr_id)) ||
+	    (error = device_create_file(dev, &dev_attr_type)) ||
+	    (error = device_create_file(dev, &dev_attr_serial)) ||
+	    (error = device_create_file(dev, &dev_attr_slotaddr)) ||
+	    (error = device_create_file(dev, &dev_attr_slotsize)) ||
+	    (error = device_create_file(dev, &dev_attr_resource)) ||
+	    (error = sysfs_create_bin_file(&dev->kobj, &zorro_config_attr)))
+		return error;
+
+	return 0;
 }
 
diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index dff16d9767d8..a1585d6f6486 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -130,6 +130,7 @@ static int __init zorro_init(void)
 {
     struct zorro_dev *z;
     unsigned int i;
+    int error;
 
     if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
 	return 0;
@@ -140,7 +141,11 @@ static int __init zorro_init(void)
     /* Initialize the Zorro bus */
     INIT_LIST_HEAD(&zorro_bus.devices);
     strcpy(zorro_bus.dev.bus_id, "zorro");
-    device_register(&zorro_bus.dev);
+    error = device_register(&zorro_bus.dev);
+    if (error) {
+	pr_err("Zorro: Error registering zorro_bus\n");
+	return error;
+    }
 
     /* Request the resources */
     zorro_bus.num_resources = AMIGAHW_PRESENT(ZORRO3) ? 4 : 2;
@@ -160,15 +165,19 @@ static int __init zorro_init(void)
 	zorro_name_device(z);
 	z->resource.name = z->name;
 	if (request_resource(zorro_find_parent_resource(z), &z->resource))
-	    printk(KERN_ERR "Zorro: Address space collision on device %s "
-		   "[%lx:%lx]\n",
-		   z->name, (unsigned long)zorro_resource_start(z),
-		   (unsigned long)zorro_resource_end(z));
+	    pr_err("Zorro: Address space collision on device %s %pR\n",
+		   z->name, &z->resource);
 	sprintf(z->dev.bus_id, "%02x", i);
 	z->dev.parent = &zorro_bus.dev;
 	z->dev.bus = &zorro_bus_type;
-	device_register(&z->dev);
-	zorro_create_sysfs_dev_files(z);
+	error = device_register(&z->dev);
+	if (error) {
+	    pr_err("Zorro: Error registering device %s\n", z->name);
+	    continue;
+	}
+	error = zorro_create_sysfs_dev_files(z);
+	if (error)
+	    dev_err(&z->dev, "Error creating sysfs files\n");
     }
 
     /* Mark all available Zorro II memory */
diff --git a/drivers/zorro/zorro.h b/drivers/zorro/zorro.h
index 5c91adac4df1..b682d5ccd63f 100644
--- a/drivers/zorro/zorro.h
+++ b/drivers/zorro/zorro.h
@@ -1,4 +1,4 @@
 
 extern void zorro_name_device(struct zorro_dev *z);
-extern void zorro_create_sysfs_dev_files(struct zorro_dev *z);
+extern int zorro_create_sysfs_dev_files(struct zorro_dev *z);