diff options
author | Linus Torvalds | 2010-08-04 15:31:02 -0700 |
---|---|---|
committer | Linus Torvalds | 2010-08-04 15:31:02 -0700 |
commit | 3cfc2c42c1cbc8e238bb9c0612c0df4565e3a8b4 (patch) | |
tree | 5adc1ff2eaf64d450bf28bb6b2ce890db2567288 /drivers | |
parent | 5cf65713f87775c548e3eb48dbafa32e12f28000 (diff) | |
parent | 0ea6e61122196509af82cc4f36cbdaacbefb8227 (diff) |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
Documentation: update broken web addresses.
fix comment typo "choosed" -> "chosen"
hostap:hostap_hw.c Fix typo in comment
Fix spelling contorller -> controller in comments
Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
fs/Kconfig: Fix typo Userpace -> Userspace
Removing dead MACH_U300_BS26
drivers/infiniband: Remove unnecessary casts of private_data
fs/ocfs2: Remove unnecessary casts of private_data
libfc: use ARRAY_SIZE
scsi: bfa: use ARRAY_SIZE
drm: i915: use ARRAY_SIZE
drm: drm_edid: use ARRAY_SIZE
synclink: use ARRAY_SIZE
block: cciss: use ARRAY_SIZE
comment typo fixes: charater => character
fix comment typos concerning "challenge"
arm: plat-spear: fix typo in kerneldoc
reiserfs: typo comment fix
update email address
...
Diffstat (limited to 'drivers')
87 files changed, 119 insertions, 126 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 51ceaee98f9f..e1e7143ca1e3 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -335,7 +335,7 @@ static void cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c, static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", "UNKNOWN" }; -#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1) +#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1) #ifdef CONFIG_PROC_FS diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index dff48701b84d..ec1711f7c5c5 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1087,7 +1087,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev, } else { epoch->flags = 0; atomic_set(&epoch->epoch_size, 0); - /* atomic_set(&epoch->active, 0); is alrady zero */ + /* atomic_set(&epoch->active, 0); is already zero */ if (rv == FE_STILL_LIVE) rv = FE_RECYCLED; } diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 218d091f3c52..16c3c8613cd3 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -4,7 +4,7 @@ * Note that you can not swap over this thing, yet. Seems to work but * deadlocks sometimes - you can not swap over TCP in general. * - * Copyright 1997-2000, 2008 Pavel Machek <pavel@suse.cz> + * Copyright 1997-2000, 2008 Pavel Machek <pavel@ucw.cz> * Parts copyright 2001 Steven Whitehouse <steve@chygwyn.com> * * This file is released under GPLv2 or later. diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 4561ce2fba6d..334cf5c8c8b6 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -4845,7 +4845,7 @@ static int register_test(struct slgt_info *info) { static unsigned short patterns[] = {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; - static unsigned int count = sizeof(patterns)/sizeof(patterns[0]); + static unsigned int count = ARRAY_SIZE(patterns); unsigned int i; int rc = 0; diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h index 7d4edb002619..5f5fbc0716ff 100644 --- a/drivers/crypto/amcc/crypto4xx_reg_def.h +++ b/drivers/crypto/amcc/crypto4xx_reg_def.h @@ -113,7 +113,7 @@ #define CRYPTO4XX_PRNG_LFSR_H 0x00070034 /** - * Initilize CRYPTO ENGINE registers, and memory bases. + * Initialize CRYPTO ENGINE registers, and memory bases. */ #define PPC4XX_PDR_POLL 0x3ff #define PPC4XX_OUTPUT_THRESHOLD 2 diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index bd5250e8c00c..e88076022a7a 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan) } /** - * atc_alloc_descriptor - allocate and return an initilized descriptor + * atc_alloc_descriptor - allocate and return an initialized descriptor * @chan: the channel to allocate descriptors for * @gfp_flags: GFP allocation flags * diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 8088b14ba5f7..f0fd6db6063c 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -10,7 +10,7 @@ * Description: * DMA engine driver for Freescale MPC8540 DMA controller, which is * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. - * The support for MPC8349 DMA contorller is also added. + * The support for MPC8349 DMA controller is also added. * * This driver instructs the DMA controller to issue the PCI Read Multiple * command for PCI read operations, instead of using the default PCI Read Line diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index f87bf104df7a..9585e531ac6b 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -929,13 +929,11 @@ drm_mode_do_interlace_quirk(struct drm_display_mode *mode, { 1440, 576 }, { 2880, 576 }, }; - static const int n_sizes = - sizeof(cea_interlaced)/sizeof(cea_interlaced[0]); if (!(pt->misc & DRM_EDID_PT_INTERLACED)) return; - for (i = 0; i < n_sizes; i++) { + for (i = 0; i < ARRAY_SIZE(cea_interlaced); i++) { if ((mode->hdisplay == cea_interlaced[i].w) && (mode->vdisplay == cea_interlaced[i].h / 2)) { mode->vdisplay *= 2; @@ -1375,7 +1373,6 @@ static const struct { { 1920, 1440, 60, 0 }, { 1920, 1440, 75, 0 }, }; -static const int num_est3_modes = sizeof(est3_modes) / sizeof(est3_modes[0]); static int drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing) @@ -1387,7 +1384,7 @@ drm_est3_modes(struct drm_connector *connector, struct detailed_timing *timing) for (i = 0; i < 6; i++) { for (j = 7; j > 0; j--) { m = (i * 8) + (7 - j); - if (m >= num_est3_modes) + if (m >= ARRAY_SIZE(est3_modes)) break; if (est[i] & (1 << j)) { mode = drm_mode_find_dmt(connector->dev, diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 76993ac16cc1..03c231be2273 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -392,13 +392,13 @@ static void intel_sdvo_debug_write(struct intel_encoder *intel_encoder, u8 cmd, DRM_LOG_KMS("%02X ", ((u8 *)args)[i]); for (; i < 8; i++) DRM_LOG_KMS(" "); - for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) { + for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) { if (cmd == sdvo_cmd_names[i].cmd) { DRM_LOG_KMS("(%s)", sdvo_cmd_names[i].name); break; } } - if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0])) + if (i == ARRAY_SIZE(sdvo_cmd_names)) DRM_LOG_KMS("(%02X)", cmd); DRM_LOG_KMS("\n"); } diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 6d553c29d106..d2d4e4045ca9 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1424,7 +1424,7 @@ intel_tv_get_modes(struct drm_connector *connector) int j, count = 0; u64 tmp; - for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]); + for (j = 0; j < ARRAY_SIZE(input_res_table); j++) { struct input_res *input = &input_res_table[j]; unsigned int hactive_s = input->w; diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c index 2d0c9ca484c5..fa05cda8c98f 100644 --- a/drivers/gpu/drm/savage/savage_bci.c +++ b/drivers/gpu/drm/savage/savage_bci.c @@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset) /* - * Initalize mappings. On Savage4 and SavageIX the alignment + * Initialize mappings. On Savage4 and SavageIX the alignment * and size of the aperture is not suitable for automatic MTRR setup * in drm_addmap. Therefore we add them manually before the maps are * initialized, and tear them down on last close. diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 8612378b131e..5f2d5df01e5c 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -1017,7 +1017,7 @@ int vmw_gmr_id_alloc(struct vmw_private *dev_priv, uint32_t *p_id) } /* - * Stream managment + * Stream management */ static void vmw_stream_destroy(struct vmw_resource *res) diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index c102d23d9b38..79399534782c 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev) /* * On HPA drives the capacity needs to be - * reinitilized on resume otherwise the disk + * reinitialized on resume otherwise the disk * can not be used and a hard reset is required */ static void ide_gd_resume(ide_drive_t *drive) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index ae47bfd22bd5..9bbb65bba67e 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -816,7 +816,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) atomic_inc(&qhp->refcnt); spin_unlock_irqrestore(&qhp->lock, *flag); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&rchp->lock, *flag); spin_lock(&qhp->lock); cxio_flush_hw_cq(&rchp->cq); @@ -827,7 +827,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) if (flushed) (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&schp->lock, *flag); spin_lock(&qhp->lock); cxio_flush_hw_cq(&schp->cq); diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 7065cb310553..86b93f2ecca3 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -905,7 +905,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp, atomic_inc(&qhp->refcnt); spin_unlock_irqrestore(&qhp->lock, *flag); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&rchp->lock, *flag); spin_lock(&qhp->lock); c4iw_flush_hw_cq(&rchp->cq); @@ -916,7 +916,7 @@ static void __flush_qp(struct c4iw_qp *qhp, struct c4iw_cq *rchp, if (flushed) (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); - /* locking heirarchy: cq lock first, then qp lock. */ + /* locking hierarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&schp->lock, *flag); spin_lock(&qhp->lock); c4iw_flush_hw_cq(&schp->cq); diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h index 39c1c3618ec7..a46e514c367b 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.h +++ b/drivers/infiniband/hw/ehca/hcp_if.h @@ -49,7 +49,7 @@ #include "hipz_hw.h" /* - * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize + * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize * resources, create the empty EQPT (ring). */ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 9c5c66d16a23..65eb8929db22 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -2055,7 +2055,7 @@ static int ipath_close(struct inode *in, struct file *fp) mutex_lock(&ipath_mutex); - fd = (struct ipath_filedata *) fp->private_data; + fd = fp->private_data; fp->private_data = NULL; pd = fd->pd; if (!pd) { diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index 0fe27baf5e72..c431d09e401a 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq, if (error) goto err_free_mem; - /* initilize and request sw/hw resources */ + /* initialize and request sw/hw resources */ ad714x_hw_init(ad714x); mutex_init(&ad714x->mutex); diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c index d4215369bb59..472a2af79446 100644 --- a/drivers/isdn/hardware/mISDN/avmfritz.c +++ b/drivers/isdn/hardware/mISDN/avmfritz.c @@ -1116,7 +1116,7 @@ fritz_remove_pci(struct pci_dev *pdev) release_card(card); else if (debug) - pr_info("%s: drvdata allready removed\n", __func__); + pr_info("%s: drvdata already removed\n", __func__); } static struct pci_device_id fcpci_ids[] __devinitdata = { diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 987fb1824f08..4e3780d78ac7 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -4268,7 +4268,7 @@ init_card(struct hfc_multi *hc) goto error; /* * Finally enable IRQ output - * this is only allowed, if an IRQ routine is allready + * this is only allowed, if an IRQ routine is already * established for this HFC, so don't do that earlier */ spin_lock_irqsave(&hc->lock, flags); @@ -5212,7 +5212,7 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev) spin_unlock_irqrestore(&HFClock, flags); } else { if (debug) - printk(KERN_DEBUG "%s: drvdata allready removed\n", + printk(KERN_DEBUG "%s: drvdata already removed\n", __func__); } } diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index 10757abac0ba..15d323b8be60 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -1773,7 +1773,7 @@ init_card(struct hfc_pci *hc) inithfcpci(hc); /* * Finally enable IRQ output - * this is only allowed, if an IRQ routine is allready + * this is only allowed, if an IRQ routine is already * established for this HFC, so don't do that earlier */ enable_hwirq(hc); diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c index 2a2181d58deb..d2dd61d65d51 100644 --- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c +++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c @@ -1139,7 +1139,7 @@ inf_remove(struct pci_dev *pdev) if (card) release_card(card); else - pr_debug("%s: drvdata allready removed\n", __func__); + pr_debug("%s: drvdata already removed\n", __func__); } static struct pci_driver infineon_driver = { diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c index d097a4e40e2b..9e07246bb9e7 100644 --- a/drivers/isdn/hardware/mISDN/speedfax.c +++ b/drivers/isdn/hardware/mISDN/speedfax.c @@ -484,7 +484,7 @@ sfax_remove_pci(struct pci_dev *pdev) if (card) release_card(card); else - pr_debug("%s: drvdata allready removed\n", __func__); + pr_debug("%s: drvdata already removed\n", __func__); } static struct pci_device_id sfaxpci_ids[] __devinitdata = { diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c index 31f9d71fb22f..9e84870b971c 100644 --- a/drivers/isdn/hardware/mISDN/w6692.c +++ b/drivers/isdn/hardware/mISDN/w6692.c @@ -1402,7 +1402,7 @@ w6692_remove_pci(struct pci_dev *pdev) release_card(card); else if (debug) - pr_notice("%s: drvdata allready removed\n", __func__); + pr_notice("%s: drvdata already removed\n", __func__); } static struct pci_device_id w6692_ids[] = { diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c index f58ded8f403f..f150330b5a23 100644 --- a/drivers/isdn/hisax/callc.c +++ b/drivers/isdn/hisax/callc.c @@ -1172,7 +1172,7 @@ CallcFreeChan(struct IsdnCardState *csta) kfree(csta->channel[i].b_st); csta->channel[i].b_st = NULL; } else - printk(KERN_WARNING "CallcFreeChan b_st ch%d allready freed\n", i); + printk(KERN_WARNING "CallcFreeChan b_st ch%d already freed\n", i); if (i || test_bit(FLG_TWO_DCHAN, &csta->HW_Flags)) { release_d_st(csta->channel + i); } else diff --git a/drivers/isdn/hisax/tei.c b/drivers/isdn/hisax/tei.c index f4cb178b0666..842f9c9e875d 100644 --- a/drivers/isdn/hisax/tei.c +++ b/drivers/isdn/hisax/tei.c @@ -130,7 +130,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg) if (st->l2.tei != -1) { st->ma.tei_m.printdebug(&st->ma.tei_m, - "assign request for allready asigned tei %d", + "assign request for already asigned tei %d", st->l2.tei); return; } diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c index 34e898fe2f4f..1b85d9d27496 100644 --- a/drivers/isdn/mISDN/tei.c +++ b/drivers/isdn/mISDN/tei.c @@ -457,7 +457,7 @@ tei_id_request(struct FsmInst *fi, int event, void *arg) if (tm->l2->tei != GROUP_TEI) { tm->tei_m.printdebug(&tm->tei_m, - "assign request for allready assigned tei %d", + "assign request for already assigned tei %d", tm->l2->tei); return; } diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index 828bcc2e129b..7f2c94a15ab1 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1295,7 +1295,7 @@ int smsclient_sendrequest(struct smscore_client_t *client, EXPORT_SYMBOL_GPL(smsclient_sendrequest); -/* old GPIO managments implementation */ +/* old GPIO managements implementation */ int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, struct smscore_config_gpio *pinconfig) { diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 21d82bab0c2e..9494f86b9a85 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -805,7 +805,7 @@ static int sd_init(struct gspca_dev *gspca_dev) /* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 1); - /* Twice sequencial need status 0xff->0x9e->0x9d */ + /* Twice sequential need status 0xff->0x9e->0x9d */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 0); @@ -877,7 +877,7 @@ static int sd_start(struct gspca_dev *gspca_dev) /* Set AE AWB Banding Type 3-> 50Hz 2-> 60Hz */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 1); - /* Twice sequencial need status 0xff->0x9e->0x9d */ + /* Twice sequential need status 0xff->0x9e->0x9d */ spca504A_acknowledged_command(gspca_dev, 0x24, 8, 3, 0x9e, 0); spca504A_acknowledged_command(gspca_dev, 0x24, diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 6030410c6677..5d6fd01f918a 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -2,7 +2,7 @@ * USB ViCam WebCam driver * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), * Christopher L Cheney (ccheney@cheney.cx), - * Pavel Machek (pavel@suse.cz), + * Pavel Machek (pavel@ucw.cz), * John Tyner (jtyner@cs.ucr.edu), * Monroe Williams (monroe@pobox.com) * diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index 9004a5fe7643..d2f20c2acae2 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -5,7 +5,7 @@ * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs - * Copyright (C) 2003 Pavel Machek (pavel@suse.cz) + * Copyright (C) 2003 Pavel Machek (pavel@ucw.cz) * Copyright (C) 2005 Philippe De Muyter (phdm@macqel.be) * Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> * diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 8997add1248e..307e847fe1cd 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -391,7 +391,7 @@ struct zoran { struct mutex resource_lock; /* prevent evil stuff */ - u8 initialized; /* flag if zoran has been correctly initalized */ + u8 initialized; /* flag if zoran has been correctly initialized */ int user; /* number of current users */ struct card_info card; struct tvnorm *timing; diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index e6ad4b205611..6f846abee3e4 100644 --- a/drivers/media/video/zoran/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -484,7 +484,7 @@ zr36057_overlay (struct zoran *zr, zr->overlay_settings.format); /* Start and length of each line MUST be 4-byte aligned. - * This should be allready checked before the call to this routine. + * This should be already checked before the call to this routine. * All error messages are internal driver checking only! */ /* video display top and bottom registers */ diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c index 639dd87c663f..e1985609af4b 100644 --- a/drivers/media/video/zoran/zr36050.c +++ b/drivers/media/video/zoran/zr36050.c @@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36050 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36050_dqt[0x86] = { diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c index 008746ff7746..5e4f57cbf314 100644 --- a/drivers/media/video/zoran/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c @@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36060 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36060_dqt[0x86] = { diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 2a52559058a9..b88a244a1edd 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1799,7 +1799,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->sh = NULL; ioc->cached_fw = NULL; - /* Initilize SCSI Config Data structure + /* Initialize SCSI Config Data structure */ memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); @@ -2478,7 +2478,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { /* - * Initalize link list for inactive raid volumes. + * Initialize link list for inactive raid volumes. */ mutex_init(&ioc->raid_data.inactive_list_mutex); INIT_LIST_HEAD(&ioc->raid_data.inactive_list); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index ca03428b59cc..3dfda9cc677d 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern, }; -/* initalize driver data structures */ +/* initialize driver data structures */ void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 38395dfa4963..70705d1306b9 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev) * mc32_load_rx_ring - load the ring of receive buffers * @dev: 3c527 to build the ring for * - * This initalises the on-card and driver datastructures to + * This initialises the on-card and driver datastructures to * the point where mc32_start_transceiver() can be called. * * The card sets up the receive ring for us. We are required to use the * ring it provides, although the size of the ring is configurable. * * We allocate an sk_buff for each ring entry in turn and - * initalise its house-keeping info. At the same time, we read + * initialise its house-keeping info. At the same time, we read * each 'next' pointer in our rx_ring array. This reduces slow * shared-memory reads and makes it easy to access predecessor * descriptors. diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index 79636ee35829..0362c8d31a08 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void) if (version_printed++ == 0) printk(version); - /* Initalize the device structure. */ + /* Initialize the device structure. */ dev->netdev_ops = &ipddp_netdev_ops; dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */ diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h index 6c8f9bb8bfe6..5d38046402b2 100644 --- a/drivers/net/benet/be_hw.h +++ b/drivers/net/benet/be_hw.h @@ -52,7 +52,7 @@ */ #define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */ -/********* Power managment (WOL) **********/ +/********* Power management (WOL) **********/ #define PCICFG_PM_CONTROL_OFFSET 0x44 #define PCICFG_PM_CONTROL_MASK 0x108 /* bits 3 & 8 */ diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 27f02970d898..a1b6301bc674 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -917,7 +917,7 @@ static void gfar_init_filer_table(struct gfar_private *priv) rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP); rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP); - /* cur_filer_idx indicated the fisrt non-masked rule */ + /* cur_filer_idx indicated the first non-masked rule */ priv->cur_filer_idx = rqfar; /* Rest are masked rules */ diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index ce587f4c4203..095b17ecf609 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1072,7 +1072,7 @@ static void hp100_mmuinit(struct net_device *dev) if (lp->mode == 1) hp100_init_pdls(dev); - /* Go to performance page and initalize isr and imr registers */ + /* Go to performance page and initialize isr and imr registers */ hp100_page(PERFORMANCE); hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */ diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index b150c102ca5a..0f1d4e96cf89 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1045,7 +1045,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu) DBG(dev, "change_mtu(%d)" NL, new_mtu); if (netif_running(ndev)) { - /* Check if we really need to reinitalize RX ring */ + /* Check if we really need to reinitialize RX ring */ if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) ret = emac_resize_rx_ring(dev, new_mtu); } diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c index 8b32cc107f0f..37504a398906 100644 --- a/drivers/net/ksz884x.c +++ b/drivers/net/ksz884x.c @@ -6810,7 +6810,7 @@ static int stp; static int fast_aging; /** - * netdev_init - initalize network device. + * netdev_init - initialize network device. * @dev: Network device. * * This function initializes the network device. diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c index b5c6279cc5a3..4eea3f70c5cf 100644 --- a/drivers/net/ll_temac_main.c +++ b/drivers/net/ll_temac_main.c @@ -497,7 +497,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options) return (0); } -/* Initilize temac */ +/* Initialize temac */ static void temac_device_reset(struct net_device *ndev) { struct temac_local *lp = netdev_priv(ndev); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 32f2deaa38bb..f5a9eb1df593 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1376,7 +1376,7 @@ static int sh_mdio_init(struct net_device *ndev, int id) bitbang->mdc_msk = 0x01; bitbang->ctrl.ops = &bb_ops; - /* MII contorller setting */ + /* MII controller setting */ mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl); if (!mdp->mii_bus) { ret = -ENOMEM; diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 29e6c63d39fd..0bc4f3030a80 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev) db->dm910x_chk_mode = 1; /* Enter the check mode */ } - /* Initilize DM910X board */ + /* Initialize DM910X board */ dmfe_init_dm910x(dev); /* Active System Interface */ @@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev) } -/* Initilize DM910X board +/* Initialize DM910X board * Reset DM910X board - * Initilize TX/Rx descriptor chain structure + * Initialize TX/Rx descriptor chain structure * Send the set-up frame * Enable Tx/Rx machine */ @@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev) if ( !(db->media_mode & DMFE_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive decriptor and CR3/4 */ dmfe_descriptor_init(db, ioaddr); /* Init CR6 to program DM910x operation */ @@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data) * Stop DM910X board * Free Tx/Rx allocated memory * Reset DM910X board - * Re-initilize DM910X board + * Re-initialize DM910X board */ static void dmfe_dynamic_reset(struct DEVICE *dev) @@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev) netif_carrier_off(dev); db->wait_reset = 0; - /* Re-initilize DM910X board */ + /* Re-initialize DM910X board */ dmfe_init_dm910x(dev); /* Restart upper layer interface */ @@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr) /* * Send a setup frame for DM9132 - * This setup frame initilize DM910X address filter mode + * This setup frame initialize DM910X address filter mode */ static void dm9132_id_table(struct DEVICE *dev) @@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev) /* * Send a setup frame for DM9102/DM9102A - * This setup frame initilize DM910X address filter mode + * This setup frame initialize DM910X address filter mode */ static void send_filter_frame(struct DEVICE *dev) @@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev) pci_set_power_state(pci_dev, PCI_D0); pci_restore_state(pci_dev); - /* Re-initilize DM910X board */ + /* Re-initialize DM910X board */ dmfe_init_dm910x(dev); /* Disable WOL */ @@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " /* Description: * when user used insmod to add module, system invoked init_module() - * to initilize and register. + * to initialize and register. */ static int __init dmfe_init_module(void) diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index 2f725d0cc762..9fb03082153a 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -50,7 +50,7 @@ * * ROADMAP * - * i2400m_dev_initalize() Called by i2400m_dev_start() + * i2400m_dev_initialize() Called by i2400m_dev_start() * i2400m_set_init_config() * i2400m_cmd_get_state() * i2400m_dev_shutdown() Called by i2400m_dev_stop() diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 9cadaa296fac..dbb986946e1a 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1224,7 +1224,7 @@ static void ap_crypt_init(struct ap_data *ap) /* Generate challenge data for shared key authentication. IEEE 802.11 specifies - * that WEP algorithm is used for generating challange. This should be unique, + * that WEP algorithm is used for generating challenge. This should be unique, * but otherwise there is not really need for randomness etc. Initialize WEP * with pseudo random key and then use increasing IV to get unique challenge * streams. diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index 2f999fc94f60..e9d9d622a9b0 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -1896,7 +1896,7 @@ fail: /* Some SMP systems have reported number of odd errors with hostap_pci. fid * register has changed values between consecutive reads for an unknown reason. * This should really not happen, so more debugging is needed. This test - * version is a big slower, but it will detect most of such register changes + * version is a bit slower, but it will detect most of such register changes * and will try to get the correct fid eventually. */ #define EXTRA_FID_READ_TESTS diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index f511e70d454c..75a80e46b391 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = { }; /** - * ccio_ioc_init - Initalize the I/O Controller + * ccio_ioc_init - Initialize the I/O Controller * @ioc: The I/O Controller. * - * Initalize the I/O Controller which includes setting up the + * Initialize the I/O Controller which includes setting up the * I/O Page Directory, the resource map, and initalizing the * U2/Uturn chip into virtual mode. */ diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index fa28d8911b00..0c62fe31a40e 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, sinfo->nskt = nr; - /* Initiliaze processor specific parameters */ + /* Initialize processor specific parameters */ for (i = 0; i < nr; i++) { skt = &sinfo->skt[i]; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 08fa453af974..74e9d22d95fb 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -808,7 +808,7 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, /** * rio_std_route_get_entry - Read switch route table entry (port number) - * assosiated with specified destID using standard registers defined in RIO + * associated with specified destID using standard registers defined in RIO * specification rev.1.3 * @mport: Master port to issue transaction * @destid: Destination ID of the device diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c index ff6fce61ea41..e4de8f37ae4a 100644 --- a/drivers/rtc/rtc-fm3130.c +++ b/drivers/rtc/rtc-fm3130.c @@ -104,7 +104,7 @@ static int fm3130_get_time(struct device *dev, struct rtc_time *t) if (!fm3130->data_valid) { /* We have invalid data in RTC, probably due to battery faults or other problems. Return EIO - for now, it will allow us to set data later insted + for now, it will allow us to set data later instead of error during probing which disables device */ return -EIO; } diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index 789f62f9b47d..1146e3522d3c 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -461,7 +461,7 @@ static struct rtc_class_ops rx8025_rtc_ops = { * Clock precision adjustment support * * According to the RX8025 SA/NB application manual the frequency and - * temperature charateristics can be approximated using the following + * temperature characteristics can be approximated using the following * equation: * * df = a * (ut - t)**2 diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 7f87979da22d..0ec3da6f3e12 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc) asc_dvc->bug_fix_cntl = 0; asc_dvc->pci_fix_asyn_xfer = 0; asc_dvc->pci_fix_asyn_xfer_always = 0; - /* asc_dvc->init_state initalized in AscInitGetConfig(). */ + /* asc_dvc->init_state initialized in AscInitGetConfig(). */ asc_dvc->sdtr_done = 0; asc_dvc->cur_total_qng = 0; asc_dvc->is_in_int = 0; diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq index f6fc4b75b5a5..5997e7c3a191 100644 --- a/drivers/scsi/aic7xxx_old/aic7xxx.seq +++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq @@ -615,7 +615,7 @@ ultra2_dmafifoflush: * went empty and the next bit of data is copied from * the SCSI fifo into the PCI fifo. It should only * come on when both FIFOs (meaning the entire FIFO - * chain) are emtpy. Since it can take up to 4 cycles + * chain) are empty. Since it can take up to 4 cycles * for new data to be copied from the SCSI fifo into * the PCI fifo, testing for FIFOEMP status for 4 * extra times gives the needed time for any diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c index d01dcc62b39a..74374618010c 100644 --- a/drivers/scsi/aic94xx/aic94xx_seq.c +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha) * asd_init_cseq_scratch -- setup and init CSEQ * @asd_ha: pointer to host adapter structure * - * Setup and initialize Central sequencers. Initialiaze the mode + * Setup and initialize Central sequencers. Initialize the mode * independent and dependent scratch page to the default settings. */ static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha) @@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0); /* * Set the desired interval between transmissions of the NOTIFY - * (ENABLE SPINUP) primitive. Must be initilized to val - 1. + * (ENABLE SPINUP) primitive. Must be initialized to val - 1. */ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq), ASD_NOTIFY_TIMEOUT - 1); diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c index bef70924d5c8..76fa5c5b40dd 100644 --- a/drivers/scsi/bfa/bfa_core.c +++ b/drivers/scsi/bfa/bfa_core.c @@ -336,7 +336,7 @@ bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids) {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT_FC}, }; - *npciids = sizeof(__pciids) / sizeof(__pciids[0]); + *npciids = ARRAY_SIZE(__pciids); *pciids = __pciids; } diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c index 3ec2f49de61d..d1a99209bf5f 100644 --- a/drivers/scsi/bfa/bfa_fcs.c +++ b/drivers/scsi/bfa/bfa_fcs.c @@ -86,7 +86,7 @@ bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad, bfa_attach_fcs(bfa); fcbuild_init(); - for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) { mod = &fcs_modules[i]; if (mod->attach) mod->attach(fcs); @@ -103,7 +103,7 @@ bfa_fcs_init(struct bfa_fcs_s *fcs) struct bfa_fcs_mod_s *mod; struct bfi_pbc_vport_s pbc_vports[BFI_PBC_MAX_VPORTS]; - for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) { mod = &fcs_modules[i]; if (mod->modinit) mod->modinit(fcs); @@ -171,13 +171,11 @@ void bfa_fcs_exit(struct bfa_fcs_s *fcs) { struct bfa_fcs_mod_s *mod; - int nmods, i; + int i; bfa_wc_init(&fcs->wc, bfa_fcs_exit_comp, fcs); - nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]); - - for (i = 0; i < nmods; i++) { + for (i = 0; i < ARRAY_SIZE(fcs_modules); i++) { mod = &fcs_modules[i]; if (mod->modexit) { diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c index 4148ae09f998..bdfdc19915f8 100644 --- a/drivers/scsi/bfa/bfa_ioim.c +++ b/drivers/scsi/bfa/bfa_ioim.c @@ -520,7 +520,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) case BFA_IOIM_SM_ABORT: /** - * IO is alraedy being cleaned up implicitly + * IO is already being cleaned up implicitly */ ioim->io_cbfn = __bfa_cb_ioim_abort; break; diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c index 66f30a0d61e0..b378ec79d386 100644 --- a/drivers/scsi/bfa/vport.c +++ b/drivers/scsi/bfa/vport.c @@ -835,7 +835,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status) switch (status) { case BFA_STATUS_OK: /* - * Initialiaze the V-Port fields + * Initialize the V-Port fields */ __vport_fcid(vport) = bfa_lps_get_pid(vport->lps); vport->vport_stats.fdisc_accepts++; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index e79605a61155..844d618b84bd 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2499,7 +2499,7 @@ module_exit(fcoe_exit); * @fp: response frame, or error encoded in a pointer (timeout) * @arg: pointer the the fcoe_ctlr structure * - * This handles MAC address managment for FCoE, then passes control on to + * This handles MAC address management for FCoE, then passes control on to * the libfc FLOGI response handler. */ static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) @@ -2531,7 +2531,7 @@ done: * @fp: response frame, or error encoded in a pointer (timeout) * @arg: pointer the the fcoe_ctlr structure * - * This handles MAC address managment for FCoE, then passes control on to + * This handles MAC address management for FCoE, then passes control on to * the libfc LOGO response handler. */ static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index b8560ad8cf66..ec2a1aec2350 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -219,8 +219,6 @@ static void fc_exch_els_rrq(struct fc_frame *); */ static char *fc_exch_rctl_names[] = FC_RCTL_NAMES_INIT; -#define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0])) - /** * fc_exch_name_lookup() - Lookup name by opcode * @op: Opcode to be looked up @@ -249,7 +247,7 @@ static inline const char *fc_exch_name_lookup(unsigned int op, char **table, static const char *fc_exch_rctl_name(unsigned int op) { return fc_exch_name_lookup(op, fc_exch_rctl_names, - FC_TABLE_SIZE(fc_exch_rctl_names)); + ARRAY_SIZE(fc_exch_rctl_names)); } /** diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 6eb334a8a7fa..d9b6e11b0e88 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -32,11 +32,11 @@ * invalid SID. We also need to ensure that states don't change unexpectedly * while processing another state. * - * HEIRARCHY + * HIERARCHY * - * The following heirarchy defines the locking rules. A greater lock + * The following hierarchy defines the locking rules. A greater lock * may be held before acquiring a lesser lock, but a lesser lock should never - * be held while attempting to acquire a greater lock. Here is the heirarchy- + * be held while attempting to acquire a greater lock. Here is the hierarchy- * * lport > disc, lport > rport, disc > rport * diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index 25479cc7f170..b9f2286fe0cb 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -34,7 +34,7 @@ * The rport should never hold the rport mutex and then attempt to acquire * either the lport or disc mutexes. The rport's mutex is considered lesser * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for - * more comments on the heirarchy. + * more comments on the hierarchy. * * The locking strategy is similar to the lport's strategy. The lock protects * the rport's states and is held and released by the entry points to the rport diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 0ebef0c0d949..0b15a8bdebfc 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -475,7 +475,7 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @shost_recovery: host reset in progress * @ioc_reset_in_progress_lock: * @ioc_link_reset_in_progress: phy/hard reset in progress - * @ignore_loginfos: ignore loginfos during task managment + * @ignore_loginfos: ignore loginfos during task management * @remove_host: flag for when driver unloads, to avoid sending dev resets * @pci_error_recovery: flag to prevent ioc access until slot reset completes * @wait_for_port_enable_to_complete: diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 6273abd0535e..16e99b686354 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3349,7 +3349,7 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) /* host recovery or link resets sent via IOCTLs */ if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) return SCSI_MLQUEUE_HOST_BUSY; - /* device busy with task managment */ + /* device busy with task management */ else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy) return SCSI_MLQUEUE_DEVICE_BUSY; /* device has been deleted */ @@ -7226,7 +7226,7 @@ _scsih_init(void) /* queuecommand callback hander */ scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done); - /* task managment callback handler */ + /* task management callback handler */ tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done); /* base internal commands callback handler */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 356ad268de6d..58d1134935ef 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_iounmap - which maped when initilized. + * pm8001_chip_iounmap - which maped when initialized. * @pm8001_ha: our hba card information */ static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) @@ -4152,7 +4152,7 @@ static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha, } /** - * pm8001_chip_ssp_tm_req - built the task managment command. + * pm8001_chip_ssp_tm_req - built the task management command. * @pm8001_ha: our hba card information. * @ccb: the ccb information. * @tmf: task management function. diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 4e4c21fafe3a..579f02854665 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -1068,7 +1068,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32( MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF)); fcp_cmnd->task_attribute = 0; - fcp_cmnd->task_managment = 0; + fcp_cmnd->task_management = 0; cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */ diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 569232b45502..15559cab39f8 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -865,7 +865,7 @@ struct fcp_cmnd { struct scsi_lun lun; uint8_t crn; uint8_t task_attribute; - uint8_t task_managment; + uint8_t task_management; uint8_t additional_cdb_len; uint8_t cdb[260]; /* 256 for CDB len and 4 for FCP_DL */ }; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 266ebd45396d..30073577c3a4 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -214,7 +214,7 @@ exit_get_sys_info_no_free: **/ static int qla4xxx_init_local_data(struct scsi_qla_host *ha) { - /* Initilize aen queue */ + /* Initialize aen queue */ ha->aen_q_count = MAX_AEN_ENTRIES; return qla4xxx_get_firmware_status(ha); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 06813789145c..edb6b362a8fa 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -965,7 +965,7 @@ static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR, /* * Note: in the target show function we recognize when the remote - * port is in the heirarchy and do not allow the driver to get + * port is in the hierarchy and do not allow the driver to get * involved in sysfs functions. The driver only gets involved if * it's the "old" style that doesn't use rports. */ diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 24661cd5e4fb..768612f8e41e 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -2649,7 +2649,7 @@ static int __init rs_360_init(void) sup->tfcr = SMC_EB; /* Set this to 1 for now, so we get single - * character interrupts. Using idle charater + * character interrupts. Using idle character * time requires some additional tuning. */ sup->mrblr = 1; @@ -2728,7 +2728,7 @@ static int __init rs_360_init(void) up->tfcr = SMC_EB; /* Set this to 1 for now, so we get single - * character interrupts. Using idle charater + * character interrupts. Using idle character * time requires some additional tuning. */ up->mrblr = 1; @@ -2886,7 +2886,7 @@ int serial_console_setup( struct console *co, char *options) sup->tfcr = SMC_EB; /* Set this to 1 for now, so we get single - * character interrupts. Using idle charater + * character interrupts. Using idle character * time requires some additional tuning. */ sup->mrblr = 1; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index cd6cf575902e..6016179db533 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -852,7 +852,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) */ cpm_set_smc_fcr(up); - /* Using idle charater time requires some additional tuning. */ + /* Using idle character time requires some additional tuning. */ out_be16(&up->smc_mrblr, pinfo->rx_fifosize); out_be16(&up->smc_maxidl, pinfo->rx_fifosize); out_be16(&up->smc_brklen, 0); diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c index 3c02fa96f282..e65b0d9202a5 100644 --- a/drivers/serial/nwpserial.c +++ b/drivers/serial/nwpserial.c @@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count) uart_console_write(&up->port, s, count, nwpserial_console_putchar); - /* wait for transmitter to become emtpy */ + /* wait for transmitter to become empty */ while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) cpu_relax(); diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 9794e0cd3dcc..7e5e5efea4e2 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags) } if (port->sc_port.state) { - /* The serial_core stuffs are initilized, use them */ + /* The serial_core stuffs are initialized, use them */ tty = port->sc_port.state->port.tty; } else { @@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw) BUG_ON(!port->sc_is_asynch); if (port->sc_port.state) { - /* We're initilized, using serial core infrastructure */ + /* We're initialized, using serial core infrastructure */ xmit = &port->sc_port.state->xmit; } else { /* Probably sn_sal_switch_to_asynch has been run but serial core isn't - * initilized yet. Just return. Writes are going through + * initialized yet. Just return. Writes are going through * sn_sal_console_write (due to register_console) at this time. */ return; diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 681419d6856e..251caa052eee 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Pavel Machek <pavel@suse.cz> + * Copyright 2008 Pavel Machek <pavel@ucw.cz> * * Distribute under GPLv2. * diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 162c95a088ed..89d260d6b031 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -2,7 +2,7 @@ * cdc-acm.c * * Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de> - * Copyright (c) 1999 Pavel Machek <pavel@suse.cz> + * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> * Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com> * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2004 Oliver Neukum <oliver@neukum.name> diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 2250095db0a0..84f9e52327f2 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -2,7 +2,7 @@ * usblp.c * * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com> - * Copyright (c) 1999 Pavel Machek <pavel@suse.cz> + * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz> * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net> * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com> diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 4f2cbdcc0273..a42ef380e917 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -125,7 +125,7 @@ void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) /* * Flush all transmitted packets from BDs * This routine is called when disabling the USB port to flush all - * transmissions that are allready scheduled in the BDs + * transmissions that are already scheduled in the BDs */ void fhci_flush_all_transmissions(struct fhci_usb *usb) { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index cdbe8bf7f674..e8a65ce45a2f 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial) spin_lock_init(&priv->lock); - /* priv->termios is left uninitalized until port opening */ + /* priv->termios is left uninitialized until port opening */ init_waitqueue_head(&serial->port[i]->write_wait); } diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index eab86e4bc770..2054d4ee9774 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -26,7 +26,7 @@ * the one that requires (phase B, wusbhc_b_{create,destroy}). * * This is so because usb_add_hcd() will start the HC, and thus, all - * the HC specific stuff has to be already initialiazed (like sysfs + * the HC specific stuff has to be already initialized (like sysfs * thingies). */ #include <linux/device.h> diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c index 90accdd54c07..a005d2a03b5d 100644 --- a/drivers/uwb/wlp/wss-lc.c +++ b/drivers/uwb/wlp/wss-lc.c @@ -180,7 +180,7 @@ error_kobject_register: * If memory was allocated for the kobject's name then it will * be freed by the kobject system during this time. * - * The EDA cache is removed and reinitilized when the WSS is removed. We + * The EDA cache is removed and reinitialized when the WSS is removed. We * thus loose knowledge of members of this WSS at that time and need not do * it here. */ diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index 7571bc26071e..d2f59015d517 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -2,7 +2,7 @@ * Backlight control code for Sharp Zaurus SL-5500 * * Copyright 2005 John Lenz <lenz@cs.wisc.edu> - * Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-) + * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-) * GPL v2 * * This driver assumes single CPU. That's okay, because collie is @@ -246,6 +246,6 @@ static void __exit locomolcd_exit(void) module_init(locomolcd_init); module_exit(locomolcd_exit); -MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>"); +MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>"); MODULE_DESCRIPTION("Collie LCD driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c index d8345fcc4fe3..6b19136aa181 100644 --- a/drivers/video/carminefb.c +++ b/drivers/video/carminefb.c @@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw) u32 loops; u32 ret; - /* Initalize Carmine */ + /* Initialize Carmine */ /* Sets internal clock */ c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE, CARMINE_DFLT_IP_CLOCK_ENABLE); diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c index 1b3b1c718e80..aba7686b1a32 100644 --- a/drivers/video/tgafb.c +++ b/drivers/video/tgafb.c @@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info) TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG); TGA_WRITE_REG(par, vtimings, TGA_VERT_REG); - /* Initalise RAMDAC. */ + /* Initialise RAMDAC. */ if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { /* Init BT485 RAMDAC registers. */ |