[PATCH] Serial: Ensure error paths are marked with unlikely()

Ensure ARM serial driver error paths are marked with the
unlikely() compiler hint.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

6 files changed, 6 insertions, 6 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index f8504b0adebc..33fbda79f350 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -110,7 +110,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
 		port->icount.rx++;
 
 		rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
-		if (rxs & RXSTAT_ANYERR) {
+		if (unlikely(rxs & RXSTAT_ANYERR)) {
 			if (rxs & RXSTAT_PARITY)
 				port->icount.parity++;
 			else if (rxs & RXSTAT_FRAME)
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 484f6fb900b5..f2a5e2933c47 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -172,7 +172,7 @@ pl010_rx_chars(struct uart_port *port)
 		 * out of the main execution path
 		 */
 		rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
-		if (rsr & UART01x_RSR_ANY) {
+		if (unlikely(rsr & UART01x_RSR_ANY)) {
 			if (rsr & UART01x_RSR_BE) {
 				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
 				port->icount.brk++;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ff658a830f34..d5cbef3fe8b6 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -137,7 +137,7 @@ pl011_rx_chars(struct uart_amba_port *uap)
 		 * out of the main execution path
 		 */
 		rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-		if (rsr & UART01x_RSR_ANY) {
+		if (unlikely(rsr & UART01x_RSR_ANY)) {
 			if (rsr & UART01x_RSR_BE) {
 				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
 				uap->port.icount.brk++;
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 16592fae47f3..e145e19b3fb5 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -116,7 +116,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
 		 * Note that the error handling code is
 		 * out of the main execution path
 		 */
-		if (ch & UART_ANY_ERR)
+		if (unlikely(ch & UART_ANY_ERR))
 			goto handle_error;
 
 		if (uart_handle_sysrq_char(port, ch, regs))
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index bd6782aeb831..435750d40a47 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -364,7 +364,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
 		flag = TTY_NORMAL;
 		port->icount.rx++;
 
-		if (uerstat & S3C2410_UERSTAT_ANY) {
+		if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
 			dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
 			    ch, uerstat);
 
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 4ce3a41f1611..85cfa08d3bad 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -162,7 +162,7 @@ lh7a40xuart_rx_chars (struct uart_port* port)
 		flag = TTY_NORMAL;
 		++port->icount.rx;
 
-		if (data & RxError) {	/* Quick check, short-circuit */
+		if (unlikely(data & RxError)) {	/* Quick check, short-circuit */
 			if (data & RxBreak) {
 				data &= ~(RxFramingError | RxParityError);
 				++port->icount.brk;