tty: Replace ASYNC_CTS_FLOW bit and update atomically

Replace ASYNC_CTS_FLOW bit in the tty_port::flags field with
TTY_PORT_CTS_FLOW bit in the tty_port::iflags field. Add
tty_port_set_cts_flow() helper to abstract the atomic bit ops.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8 files changed, 14 insertions, 34 deletions

diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index bcae5bb15751..bdf41ac613dc 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1466,10 +1466,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
 	}
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
-	if (cflag & CRTSCTS)
-		info->port.flags |= ASYNC_CTS_FLOW;
-	else
-		info->port.flags &= ~ASYNC_CTS_FLOW;
+	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
 
 	if (cflag & CLOCAL)
 		info->port.flags &= ~ASYNC_CHECK_CD;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index e68208eac322..92717b088959 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -727,11 +727,9 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
 	info->IER &= ~UART_IER_MSI;
 	if (port->flags & ASYNC_HARDPPS_CD)
 		info->IER |= UART_IER_MSI;
-	if (cflag & CRTSCTS) {
-		port->flags |= ASYNC_CTS_FLOW;
+	tty_port_set_cts_flow(port, cflag & CRTSCTS);
+	if (cflag & CRTSCTS)
 		info->IER |= UART_IER_MSI;
-	} else
-		port->flags &= ~ASYNC_CTS_FLOW;
 	if (cflag & CLOCAL)
 		port->flags &= ~ASYNC_CHECK_CD;
 	else {
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index d67e542bab1c..1a12776ba24c 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -2083,13 +2083,11 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 			info->cor1 |= CyPARITY_NONE;
 
 		/* CTS flow control flag */
-		if (cflag & CRTSCTS) {
-			info->port.flags |= ASYNC_CTS_FLOW;
+		tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
+		if (cflag & CRTSCTS)
 			info->cor2 |= CyCtsAE;
-		} else {
-			info->port.flags &= ~ASYNC_CTS_FLOW;
+		else
 			info->cor2 &= ~CyCtsAE;
-		}
 		if (cflag & CLOCAL)
 			info->port.flags &= ~ASYNC_CHECK_CD;
 		else
@@ -2234,7 +2232,7 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 		}
 		/* As the HW flow control is done in firmware, the driver
 		   doesn't need to care about it */
-		info->port.flags &= ~ASYNC_CTS_FLOW;
+		tty_port_set_cts_flow(&info->port, 0);
 
 		/* XON/XOFF/XANY flow control flags */
 		sw_flow = 0;
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 8bf67630018b..c5f06b54b9ca 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -765,11 +765,9 @@ static void isicom_config_port(struct tty_struct *tty)
 
 	/* flow control settings ...*/
 	flow_ctrl = 0;
-	port->port.flags &= ~ASYNC_CTS_FLOW;
-	if (C_CRTSCTS(tty)) {
-		port->port.flags |= ASYNC_CTS_FLOW;
+	tty_port_set_cts_flow(&port->port, C_CRTSCTS(tty));
+	if (C_CRTSCTS(tty))
 		flow_ctrl |= ISICOM_CTSRTS;
-	}
 	if (I_IXON(tty))
 		flow_ctrl |= ISICOM_RESPOND_XONXOFF;
 	if (I_IXOFF(tty))
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index f23c2a101688..8f3fdad37ac7 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -711,8 +711,8 @@ static int mxser_change_speed(struct tty_struct *tty,
 	/* CTS flow control flag and modem status interrupts */
 	info->IER &= ~UART_IER_MSI;
 	info->MCR &= ~UART_MCR_AFE;
+	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
 	if (cflag & CRTSCTS) {
-		info->port.flags |= ASYNC_CTS_FLOW;
 		info->IER |= UART_IER_MSI;
 		if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
 			info->MCR |= UART_MCR_AFE;
@@ -744,8 +744,6 @@ static int mxser_change_speed(struct tty_struct *tty,
 				}
 			}
 		}
-	} else {
-		info->port.flags &= ~ASYNC_CTS_FLOW;
 	}
 	outb(info->MCR, info->ioaddr + UART_MCR);
 	if (cflag & CLOCAL) {
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 3768e5c71c0b..0e4290183280 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1966,11 +1966,8 @@ static void mgsl_change_params(struct mgsl_struct *info)
 	}
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
-	if (cflag & CRTSCTS)
-		info->port.flags |= ASYNC_CTS_FLOW;
-	else
-		info->port.flags &= ~ASYNC_CTS_FLOW;
-		
+	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
+
 	if (cflag & CLOCAL)
 		info->port.flags &= ~ASYNC_CHECK_CD;
 	else
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index ceeaeb703f51..5da69d30f816 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -2576,10 +2576,7 @@ static void change_params(struct slgt_info *info)
 	}
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
-	if (cflag & CRTSCTS)
-		info->port.flags |= ASYNC_CTS_FLOW;
-	else
-		info->port.flags &= ~ASYNC_CTS_FLOW;
+	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
 
 	if (cflag & CLOCAL)
 		info->port.flags &= ~ASYNC_CHECK_CD;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index b0cce4b24e51..7a21491d0c0d 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -2813,10 +2813,7 @@ static void change_params(SLMP_INFO *info)
 	}
 	info->timeout += HZ/50;		/* Add .02 seconds of slop */
 
-	if (cflag & CRTSCTS)
-		info->port.flags |= ASYNC_CTS_FLOW;
-	else
-		info->port.flags &= ~ASYNC_CTS_FLOW;
+	tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
 
 	if (cflag & CLOCAL)
 		info->port.flags &= ~ASYNC_CHECK_CD;