Merge branch 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

* 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  USB: Fix up URB error codes to reflect implementation.
  xhci: Always set urb->status to zero for isoc endpoints.
  xhci: Add reset on resume quirk for asrock p67 host
  xHCI 1.0: Incompatible Device Error
  xHCI 1.0: Force Stopped Event(FSE)
  xhci: Don't warn about zeroed bMaxBurst descriptor field.
  USB: Free bandwidth when usb_disable_device is called.
  xhci: Reject double add of active endpoints.

7 files changed, 88 insertions, 12 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c2ac08755f27..a428aa080a36 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1634,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev)
 {
 	struct usb_device	*udev = *pdev;
 	int			i;
+	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);
 
 	if (!udev) {
 		pr_debug ("%s nodev\n", __func__);
@@ -1661,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg (&udev->dev, "unregistering device\n");
+	mutex_lock(hcd->bandwidth_mutex);
 	usb_disable_device(udev, 0);
+	mutex_unlock(hcd->bandwidth_mutex);
 	usb_hcd_synchronize_unlinks(udev);
 
 	usb_remove_ep_devs(&udev->ep0);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5701e857392b..64c7ab4702df 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1135,10 +1135,13 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
  * Deallocates hcd/hardware state for the endpoints (nuking all or most
  * pending urbs) and usbcore state for the interfaces, so that usbcore
  * must usb_set_configuration() before any interfaces could be used.
+ *
+ * Must be called with hcd->bandwidth_mutex held.
  */
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
 	int i;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1172,6 +1175,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		/* Second pass: remove endpoint pointers */
+	}
 	for (i = skip_ep0; i < 16; ++i) {
 		usb_disable_endpoint(dev, i, true);
 		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
@@ -1727,6 +1740,7 @@ free_interfaces:
 	/* if it's already configured, clear out old state first.
 	 * getting rid of old interfaces means unbinding their drivers.
 	 */
+	mutex_lock(hcd->bandwidth_mutex);
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device(dev, 1);	/* Skip ep0 */
 
@@ -1739,7 +1753,6 @@ free_interfaces:
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
-	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
 		mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0f8e1d29a858..fcb7f7efc86d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1215,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
 		max_packet = ep->ss_ep_comp.bMaxBurst;
-		if (!max_packet)
-			xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n");
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
 		break;
 	case USB_SPEED_HIGH:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 17541d09eabb..cb16de213f64 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,9 @@
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
 
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67	0x7023
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+	}
 
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 800f417c7309..70cacbbe7fb9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1733,6 +1733,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		frame->status = -EOVERFLOW;
 		skip_td = true;
 		break;
+	case COMP_DEV_ERR:
 	case COMP_STALL:
 		frame->status = -EPROTO;
 		skip_td = true;
@@ -1767,9 +1768,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		}
 	}
 
-	if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
-		*status = 0;
-
 	return finish_td(xhci, td, event_trb, event, ep, status, false);
 }
 
@@ -1787,8 +1785,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	idx = urb_priv->td_cnt;
 	frame = &td->urb->iso_frame_desc[idx];
 
-	/* The transfer is partly done */
-	*status = -EXDEV;
+	/* The transfer is partly done. */
 	frame->status = -EXDEV;
 
 	/* calc actual length */
@@ -2016,6 +2013,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
 				 ep_index);
 		goto cleanup;
+	case COMP_DEV_ERR:
+		xhci_warn(xhci, "WARN: detect an incompatible device");
+		status = -EPROTO;
+		break;
 	case COMP_MISSED_INT:
 		/*
 		 * When encounter missed service error, one or more isoc tds
@@ -2063,6 +2064,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		/* Is this a TRB in the currently executing TD? */
 		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
 				td->last_trb, event_dma);
+
+		/*
+		 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
+		 * is not in the current TD pointed by ep_ring->dequeue because
+		 * that the hardware dequeue pointer still at the previous TRB
+		 * of the current TD. The previous TRB maybe a Link TD or the
+		 * last TRB of the previous TD. The command completion handle
+		 * will take care the rest.
+		 */
+		if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+			ret = 0;
+			goto cleanup;
+		}
+
 		if (!event_seg) {
 			if (!ep->skip ||
 			    !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
@@ -2158,6 +2173,11 @@ cleanup:
 						urb->transfer_buffer_length,
 						status);
 			spin_unlock(&xhci->lock);
+			/* EHCI, UHCI, and OHCI always unconditionally set the
+			 * urb->status of an isochronous endpoint to 0.
+			 */
+			if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+				status = 0;
 			usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
 			spin_lock(&xhci->lock);
 		}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06e7023258d0..f5fe1ac301ab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		msleep(100);
 
 	spin_lock_irq(&xhci->lock);
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		hibernated = true;
 
 	if (!hibernated) {
 		/* step 1: restore register */
@@ -1401,6 +1403,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	u32 added_ctxs;
 	unsigned int last_ctx;
 	u32 new_add_flags, new_drop_flags, new_slot_info;
+	struct xhci_virt_device *virt_dev;
 	int ret = 0;
 
 	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
@@ -1425,11 +1428,25 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		return 0;
 	}
 
-	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
-	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	virt_dev = xhci->devs[udev->slot_id];
+	in_ctx = virt_dev->in_ctx;
+	out_ctx = virt_dev->out_ctx;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
 	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+
+	/* If this endpoint is already in use, and the upper layers are trying
+	 * to add it again without dropping it, reject the addition.
+	 */
+	if (virt_dev->eps[ep_index].ring &&
+			!(le32_to_cpu(ctrl_ctx->drop_flags) &
+				xhci_get_endpoint_flag(&ep->desc))) {
+		xhci_warn(xhci, "Trying to add endpoint 0x%x "
+				"without dropping it.\n",
+				(unsigned int) ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
 	/* If the HCD has already noted the endpoint is enabled,
 	 * ignore this request.
 	 */
@@ -1445,8 +1462,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	 * process context, not interrupt context (or so documenation
 	 * for usb_set_interface() and usb_set_configuration() claim).
 	 */
-	if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
-				udev, ep, GFP_NOIO) < 0) {
+	if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
 		dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
 				__func__, ep->desc.bEndpointAddress);
 		return -ENOMEM;
@@ -1537,6 +1553,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
 				"and endpoint is not disabled.\n");
 		ret = -EINVAL;
 		break;
+	case COMP_DEV_ERR:
+		dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint "
+				"configure command.\n");
+		ret = -ENODEV;
+		break;
 	case COMP_SUCCESS:
 		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
 		ret = 0;
@@ -1571,6 +1592,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
 		xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
 		ret = -EINVAL;
 		break;
+	case COMP_DEV_ERR:
+		dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate "
+				"context command.\n");
+		ret = -ENODEV;
+		break;
 	case COMP_MEL_ERR:
 		/* Max Exit Latency too large error */
 		dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
@@ -2853,6 +2879,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 		dev_warn(&udev->dev, "Device not responding to set address.\n");
 		ret = -EPROTO;
 		break;
+	case COMP_DEV_ERR:
+		dev_warn(&udev->dev, "ERROR: Incompatible device for address "
+				"device command.\n");
+		ret = -ENODEV;
+		break;
 	case COMP_SUCCESS:
 		xhci_dbg(xhci, "Successful Address Device command\n");
 		break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7d1ea3bf5e1f..d8bbf5ccb10d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -874,6 +874,8 @@ struct xhci_transfer_event {
 #define COMP_PING_ERR	20
 /* Event Ring is full */
 #define COMP_ER_FULL	21
+/* Incompatible Device Error */
+#define COMP_DEV_ERR	22
 /* Missed Service Error - HC couldn't service an isoc ep within interval */
 #define COMP_MISSED_INT	23
 /* Successfully stopped command ring */
@@ -1308,6 +1310,7 @@ struct xhci_hcd {
  */
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
 #define XHCI_BROKEN_MSI		(1 << 6)
+#define XHCI_RESET_ON_RESUME	(1 << 7)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */