Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree from Jiri Kosina:
 "Assorted tiny fixes queued in trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits)
  DocBook: update EXPORT_SYMBOL entry to point at export.h
  Documentation: update top level 00-INDEX file with new additions
  ARM: at91/ide: remove unsused at91-ide Kconfig entry
  percpu_counter.h: comment code for better readability
  x86, efi: fix comment typo in head_32.S
  IB: cxgb3: delay freeing mem untill entirely done with it
  net: mvneta: remove unneeded version.h include
  time: x86: report_lost_ticks doesn't exist any more
  pcmcia: avoid static analysis complaint about use-after-free
  fs/jfs: Fix typo in comment : 'how may' -> 'how many'
  of: add missing documentation for of_platform_populate()
  btrfs: remove unnecessary cur_trans set before goto loop in join_transaction
  sound: soc: Fix typo in sound/codecs
  treewide: Fix typo in various drivers
  btrfs: fix comment typos
  Update ibmvscsi module name in Kconfig.
  powerpc: fix typo (utilties -> utilities)
  of: fix spelling mistake in comment
  h8300: Fix home page URL in h8300/README
  xtensa: Fix home page URL in Kconfig
  ...

25 files changed, 29 insertions, 34 deletions

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 33c9a44a9678..a8a41e07a221 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -349,7 +349,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 
 	ret = ath3k_get_state(udev, &fw_state);
 	if (ret < 0) {
-		BT_ERR("Can't get state to change to load configration err");
+		BT_ERR("Can't get state to change to load configuration err");
 		return -EBUSY;
 	}
 
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 46d94e9e95b5..3f37f3b3f268 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -658,7 +658,7 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
 	if (old_freq == freq)
 		return 0;
 
-	dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt);
+	dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
 
 	mutex_lock(&data->lock);
 
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 6ce6e07c38c1..45912e6e0ac2 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -329,7 +329,7 @@ module_param_named(quirks, param_quirks, int, 0644);
 MODULE_PARM_DESC(quirks, "Chip quirks (default = 0"
 	", nonatomic cycle timer = "	__stringify(QUIRK_CYCLE_TIMER)
 	", reset packet generation = "	__stringify(QUIRK_RESET_PACKET)
-	", AR/selfID endianess = "	__stringify(QUIRK_BE_HEADERS)
+	", AR/selfID endianness = "	__stringify(QUIRK_BE_HEADERS)
 	", no 1394a enhancements = "	__stringify(QUIRK_NO_1394A)
 	", disable MSI = "		__stringify(QUIRK_NO_MSI)
 	", TI SLLZ059 erratum = "	__stringify(QUIRK_TI_SLLZ059)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9d4a2c2adf0e..32158d21c632 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1460,7 +1460,7 @@ static const char *swizzle_string(unsigned swizzle)
 	case I915_BIT_6_SWIZZLE_9_10_17:
 		return "bit9/bit10/bit17";
 	case I915_BIT_6_SWIZZLE_UNKNOWN:
-		return "unkown";
+		return "unknown";
 	}
 
 	return "bug";
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e7d6a13ec6a6..eae0c7e468cf 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -320,7 +320,7 @@ config HID_LOGITECH_DJ
 	Say Y if you want support for Logitech Unifying receivers and devices.
 	Unifying receivers are capable of pairing up to 6 Logitech compliant
 	devices to the same receiver. Without this driver it will be handled by
-	generic USB_HID driver and all incomming events will be multiplexed
+	generic USB_HID driver and all incoming events will be multiplexed
 	into a single mouse and a single keyboard device.
 
 config LOGITECH_FF
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3c4417a1d438..02906ca99b41 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -700,11 +700,6 @@ config BLK_DEV_IDE_TX4939
 	depends on SOC_TX4939
 	select BLK_DEV_IDEDMA_SFF
 
-config BLK_DEV_IDE_AT91
-	tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
-	depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
-	select IDE_TIMINGS
-
 config BLK_DEV_IDE_ICSIDE
 	tristate "ICS IDE interface support"
 	depends on ARM && ARCH_ACORN
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 0bdf09aa6f42..145d82a64d0a 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -783,8 +783,8 @@ static int iwch_dealloc_mw(struct ib_mw *mw)
 	mmid = (mw->rkey) >> 8;
 	cxio_deallocate_window(&rhp->rdev, mhp->attr.stag);
 	remove_handle(rhp, &rhp->mmidr, mmid);
-	kfree(mhp);
 	PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __func__, mw, mmid, mhp);
+	kfree(mhp);
 	return 0;
 }
 
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 3942efbbfb58..a315a2914d70 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER {
 #define LAPD            6       /* lapd (Q.921)                     */
 #define X25_L2          7       /* x.25 layer-2                     */
 #define V120_L2         8       /* V.120 layer-2 protocol           */
-#define V42_IN          9       /* V.42 layer-2 protocol, incomming */
+#define V42_IN          9       /* V.42 layer-2 protocol, incoming */
 #define V42            10       /* V.42 layer-2 protocol            */
 #define MDM_ATP        11       /* AT Parser built in the L2        */
 #define X75_V42BIS     12       /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */
-#define RTPL2_IN       13       /* RTP layer-2 protocol, incomming  */
+#define RTPL2_IN       13       /* RTP layer-2 protocol, incoming  */
 #define RTPL2          14       /* RTP layer-2 protocol             */
 #define V120_V42BIS    15       /* V.120 layer-2 protocol supporting V.42 bis compression */
 
@@ -1125,7 +1125,7 @@ extern word li_total_channels;
   | Direction           | word | Enable compression/decompression for    |
   |                     |      | 0: All direction                        |
   |                     |      | 1: disable outgoing data                |
-  |                     |      | 2: disable incomming data               |
+  |                     |      | 2: disable incoming data               |
   |                     |      | 3: disable both direction (default)     |
   +---------------------+------+-----------------------------------------+
   | Number of code      | word | Parameter P1 of V.42bis in accordance   |
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 889dc984bbca..329c0c26abfb 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -419,11 +419,11 @@ struct dual
 #define LAPD            6       /* lapd (Q.921)                     */
 #define X25_L2          7       /* x.25 layer-2                     */
 #define V120_L2         8       /* V.120 layer-2 protocol           */
-#define V42_IN          9       /* V.42 layer-2 protocol, incomming */
+#define V42_IN          9       /* V.42 layer-2 protocol, incoming */
 #define V42            10       /* V.42 layer-2 protocol            */
 #define MDM_ATP        11       /* AT Parser built in the L2        */
 #define X75_V42BIS     12       /* x.75 with V.42bis                */
-#define RTPL2_IN       13       /* RTP layer-2 protocol, incomming  */
+#define RTPL2_IN       13       /* RTP layer-2 protocol, incoming  */
 #define RTPL2          14       /* RTP layer-2 protocol             */
 #define V120_V42BIS    15       /* V.120 asynchronous mode supporting V.42bis compression */
 #define LISTENER       27       /* Layer 2 to listen line */
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index f8e405c383a0..2c0d2c2bf946 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -689,7 +689,7 @@ l1oip_socket_thread(void *data)
 	hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip);
 	hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport);
 
-	/* bind to incomming port */
+	/* bind to incoming port */
 	if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local,
 			      sizeof(hc->sin_local))) {
 		printk(KERN_ERR "%s: Failed to bind socket to port %d.\n",
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 1abdc7d9c744..4a574f3cfb2f 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -345,7 +345,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = {
 	/*
 	 * This is a generic configuration which is valid for most
 	 * prp input-output format combinations.
-	 * We set the incomming and outgoing pixelformat to a
+	 * We set the incoming and outgoing pixelformat to a
 	 * 16 Bit wide format and adjust the bytesperline
 	 * accordingly. With this configuration the inputdata
 	 * will not be changed by the emma and could be any type
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c4daee1b7286..e81a747ea8ce 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8843,7 +8843,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close)
 		       (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) :
 		       (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0));
 	} else {
-		/* Prevent incomming interrupts in IGU */
+		/* Prevent incoming interrupts in IGU */
 		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
 
 		REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION,
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index b6025c305e10..cd345b8969bc 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index e3c3d122979e..b2cca58de910 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -64,7 +64,7 @@ static const char mlx4_en_version[] =
 
 /* Enable RSS UDP traffic */
 MLX4_EN_PARM_INT(udp_rss, 1,
-		 "Enable RSS for incomming UDP traffic or disabled (0)");
+		 "Enable RSS for incoming UDP traffic or disabled (0)");
 
 /* Priority pausing */
 MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 5d5fd06c4b42..28a6d4838364 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1150,7 +1150,7 @@ static int qlcnic_check_npar_opertional(struct qlcnic_adapter *adapter)
 	}
 	if (!npar_opt_timeo) {
 		dev_err(&adapter->pdev->dev,
-			"Waiting for NPAR state to opertional timeout\n");
+			"Waiting for NPAR state to operational timeout\n");
 		return -EIO;
 	}
 	return 0;
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 84872043b5c6..9cea451a6081 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 		/* Enable Interuupt */
 		self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM					
 				
-		/* Be ready for incomming frames */
+		/* Be ready for incoming frames */
 		ali_ircc_dma_receive(self);	// benajmin 2000/11/8 07:46PM not complete
 	}	
 	/* Go to SIR Speed */
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 0125524c08c4..04da786c84d2 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -429,7 +429,7 @@ static u64 __of_translate_address(struct device_node *dev,
 		goto bail;
 	bus = of_match_bus(parent);
 
-	/* Cound address cells & copy address locally */
+	/* Count address cells & copy address locally */
 	bus->count_cells(dev, &na, &ns);
 	if (!OF_CHECK_COUNTS(na, ns)) {
 		printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index b80891b43816..e0a6514ab46c 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -436,6 +436,7 @@ EXPORT_SYMBOL(of_platform_bus_probe);
  * of_platform_populate() - Populate platform_devices from device tree data
  * @root: parent of the first level to probe or NULL for the root of the tree
  * @matches: match table, NULL to use the default
+ * @lookup: auxdata table for matching id and platform_data with device nodes
  * @parent: parent to hook devices from, NULL for toplevel
  *
  * Similar to of_platform_bus_probe(), this function walks the device tree
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 430a9ac56091..065704c605d5 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -369,12 +369,12 @@ static int do_validate_mem(struct pcmcia_socket *s,
 		}
 	}
 
-	free_region(res2);
-	free_region(res1);
-
 	dev_dbg(&s->dev, "cs: memory probe 0x%06lx-0x%06lx: %p %p %u %u %u",
 		base, base+size-1, res1, res2, ret, info1, info2);
 
+	free_region(res2);
+	free_region(res1);
+
 	if ((ret) || (info1 != info2) || (info1 == 0))
 		return -EINVAL;
 
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index f1e323924f12..d85446021ddb 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -839,7 +839,7 @@ static void rpmsg_recv_done(struct virtqueue *rvq)
 		/* farewell, ept, we don't need you anymore */
 		kref_put(&ept->refcount, __ept_release);
 	} else
-		dev_warn(dev, "msg received with no recepient\n");
+		dev_warn(dev, "msg received with no recipient\n");
 
 	/* publish the real size of the buffer */
 	sg_init_one(&sg, msg, RPMSG_BUF_SIZE);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d56b2534f3eb..db95c547c09d 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -883,7 +883,7 @@ config SCSI_IBMVSCSI
 	  This is the IBM POWER Virtual SCSI Client
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ibmvscsic.
+	  module will be called ibmvscsi.
 
 config SCSI_IBMVSCSIS
 	tristate "IBM Virtual SCSI Server support"
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 76ead8dac265..f240464effde 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -224,7 +224,7 @@ enum binder_driver_return_protocol {
 	BR_SPAWN_LOOPER = _IO('r', 13),
 	/*
 	 * No parameters.  The driver has determined that a process has no
-	 * threads waiting to service incomming transactions.  When a process
+	 * threads waiting to service incoming transactions.  When a process
 	 * receives this command, it must spawn a new service thread and
 	 * register it via bcENTER_LOOPER.
 	 */
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 9a2ec251ae4d..c3a90e7012af 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -72,7 +72,7 @@ int pow_receive_group = 15;
 module_param(pow_receive_group, int, 0444);
 MODULE_PARM_DESC(pow_receive_group, "\n"
 	"\tPOW group to receive packets from. All ethernet hardware\n"
-	"\twill be configured to send incomming packets to this POW\n"
+	"\twill be configured to send incoming packets to this POW\n"
 	"\tgroup. Also any other software can submit packets to this\n"
 	"\tgroup for the kernel to process.");
 
diff --git a/drivers/target/sbp/sbp_target.c b/drivers/target/sbp/sbp_target.c
index 2e8d06f198ae..6917a9e938e7 100644
--- a/drivers/target/sbp/sbp_target.c
+++ b/drivers/target/sbp/sbp_target.c
@@ -1719,7 +1719,7 @@ static struct se_node_acl *sbp_alloc_fabric_acl(struct se_portal_group *se_tpg)
 
 	nacl = kzalloc(sizeof(struct sbp_nacl), GFP_KERNEL);
 	if (!nacl) {
-		pr_err("Unable to alocate struct sbp_nacl\n");
+		pr_err("Unable to allocate struct sbp_nacl\n");
 		return NULL;
 	}
 
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index b4ba0670dc54..97a511f4185d 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -646,7 +646,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
 		(*assem) = pool_allocate(hw, *assem, length);
 		if (!(*assem)) {
 			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
-				": no memory for incomming data packet, dropped!\n");
+				": no memory for incoming data packet, dropped!\n");
 			return;
 		}
 		(*assem)->protocol = protocol;
@@ -670,7 +670,7 @@ static void queue_received_packet(struct ipw_hardware *hw,
 		packet = pool_allocate(hw, NULL, length);
 		if (!packet) {
 			printk(KERN_ERR IPWIRELESS_PCCARD_NAME
-				": no memory for incomming ctrl packet, dropped!\n");
+				": no memory for incoming ctrl packet, dropped!\n");
 			return;
 		}
 		packet->protocol = protocol;